Stopping Save/Restore Sound Card State... [ OK ] Stopped target RPC Port Mapper. Stopping Serial Getty on ttyS0... [ OK ] Stopped target Sound Card. Stopping ACPI event daemon... Stopping PHS daemon... Stopping Disk Manager... Stopping Bluetooth service... Stopping System Logging Service... Stopping Authorization Manager... Stopping Session 1 of user scala. Stopping Display manager for automatic session logins... [ OK ] Stopped target Timers. [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Message of the Day. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped Clean PHP session files every 30 mins. [ OK ] Stopped Trigger anacron every hour. Stopping LSB: service and resource monitoring daemon... Stopping User Manager for UID 1000... Stopping Configure USB flashing port for device mode... [ OK ] Stopped Daily apt download activities. Stopping Regular background program processing daemon... [ OK ] Stopped Initialize hardware monitoring sensors. [ OK ] Stopped Session 3 of user scala. Stopping Serial Getty on ttyGS0... Stopping LSB: Brings up/down network automatically... Stopping Argus daemon... [ OK ] Stopped Postfix Mail Transport Agent. Stopping Postfix Mail Transport Agent (instance -)... [ OK ] Stopped Discard unused blocks once a week. [ OK ] Stopped target System Time Synchronized. Stopping Display Low memory warning... [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped System Logging Service. [ OK ] Stopped Disk Manager. [ OK ] Stopped Authorization Manager. [ OK ] Stopped Display Low memory warning. [ OK ] Stopped PHS daemon. [ OK ] Stopped NVS-SERVICE Embedded Sensor HAL Daemon. [ OK ] Stopped Argus daemon. [ OK ] Stopped /usr/local/bin/bt_enable.sh Compatibility. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped Serial Getty on ttyGS0. [ OK ] Stopped Getty on tty1. [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped Bluetooth service. [ OK ] Stopped ACPI event daemon. [ OK ] Stopped User Manager for UID 1000. [ OK ] Stopped Daemon for power management. [ OK ] Stopped Save/Restore Sound Card State. [ OK ] Stopped Postfix Mail Transport Agent (instance -). [ OK ] Stopped Session 1 of user scala. [ OK ] Removed slice system-postfix.slice. [ OK ] Stopped target Host and Network Name Lookups. [ OK ] Removed slice User Slice of scala. Stopping Login Service... [ OK ] Removed slice system-getty.slice. [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Stopped Login Service. [ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf. [ OK ] Stopped LSB: service and resource monitoring daemon. [ OK ] Stopped LSB: Brings up/down network automatically. [ OK ] Stopped Runtime configuration for USB device mode. [ OK ] Stopped Display manager for automatic session logins. Stopping Permit User Sessions... [ OK ] Stopped target Network is Online. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Network. Stopping Network Name Resolution... Stopping WPA supplicant... Stopping Raise network interfaces... [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ 73.094482] [dhd-wlan0] wl_android_wifi_off : in g_wifi_on=1, on_failure=1 [ 73.104210] [dhd-wlan0] wl_android_wifi_off : out [ OK ] Stopped Network Name Resolution. [ OK ] Stopped WPA supplicant. [ OK ] Stopped Raise network interfaces. [ OK ] Stopped target Network (Pre). Stopping D-Bus System Message Bus... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Configure USB flashing port for device mode. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped resolvconf-pull-resolved.path. [ OK ] Stopped ACPI Events Check. [ OK ] Stopped target Sockets. [ OK ] Closed Syslog Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed ACPID Listen Socket. [ OK ] Stopped target System Initialization. Stopping Update UTMP about System Boot/Shutdown... Stopping Network Time Synchronization... Stopping Load/Save Random Seed... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. [ OK ] Stopped target Local Encrypted Volumes. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped Network Time Synchronization. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. Unmounting /run/user/1000... [ OK ] Unmounted /run/user/1000. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped target Swap. [ OK ] Reached target Shutdown. Deactivating swap /dev/zram1... Deactivating swap /dev/zram2... Deactivating swap /dev/zram3... Deactivating swap /dev/zram0... [ OK ] Deactivated swap /dev/zram1. [ OK ] Deactivated swap /dev/zram2. [ OK ] Deactivated swap /dev/zram3. [ OK ] Deactivated swap /dev/zram0. [ OK ] Reached target Unmount All Filesystems. [ OK ] Reached target Final Step. Starting Reboot... [ 78.744410] watchdog: watchdog0: watchdog did not stop! [ 78.835882] systemd-shutdow: 37 output lines suppressed due to ratelimiting [ 79.266796] reboot: Restarting system [0000.205] [L4T TegraBoot] (version 00.00.2018.01-l4t-43566ac1) [0000.211] Processing in cold boot mode Bootloader 2 [0000.215] A02 Bootrom Patch rev = 1023 [0000.219] Power-up reason: software reset [0000.223] No Battery Present [0000.225] pmic max77620 reset reason [0000.229] pmic max77620 NVERC : 0x0 [0000.232] RamCode = 0 [0000.234] Platform has DDR4 type RAM [0000.238] max77620 disabling SD1 Remote Sense [0000.242] Setting DDR voltage to 1125mv [0000.246] Serial Number of Pmic Max77663: 0x421ee [0000.253] Entering ramdump check [0000.256] Get RamDumpCarveOut = 0x0 [0000.260] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8 [0000.265] Last reboot was clean, booting normally! [0000.269] Sdram initialization is successful [0000.273] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000 [0000.280] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000 [0000.285] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000 [0000.291] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000 [0000.297] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000 [0000.303] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000 [0000.309] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000 [0000.315] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000 [0000.331] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000 [0000.337] Platform-DebugCarveout: 0 [0000.340] Nck Carveout Base=0x00000000ff080000 Size=0x00200000 [0000.346] Read GPT from (0:3) [0000.361] Csd NumOfBlocks=0 [0000.369] Using GPT Primary to query partitions [0000.374] Read PT from (0:3) [0000.378] Using BFS PT to query partitions [0000.383] PT: Partition RP5 NOT found ! [0000.386] Warning: Find Partition via PT Failed [0000.391] Load RPB failed, skip RPB. [0000.579] *** Booting BFS0. [0000.582] PT: Partition LNX NOT found ! [0001.169] *** Booting KFS0. [0001.172] Loading Tboot-CPU binary [0001.179] Verifying TBC in SecurePKC mode [0001.188] Bootloader load address is 0xa0000000, entry address is 0xa0000258 [0001.195] Bootloader downloaded successfully. [0001.199] Downloaded Tboot-CPU binary to 0xa0000258 [0001.204] MAX77620_GPIO5 configured [0001.208] CPU power rail is up [0001.210] CPU clock enabled [0001.214] Performing RAM repair [0001.217] Updating A64 Warmreset Address to 0xa00002e9 [0001.222] Loading NvTbootBootloaderDTB [0001.239] Verifying NvTbootBootloaderDTB in SecurePKC mode [0001.302] Bootloader DTB Load Address: 0x83000000 [0001.307] Loading NvTbootKernelDTB [0001.323] Verifying NvTbootKernelDTB in SecurePKC mode [0001.385] Kernel DTB Load Address: 0x83100000 [0001.391] Loading cboot binary [0001.402] Verifying EBT in SecurePKC mode [0001.434] Bootloader load address is 0x92c00000, entry address is 0x92c00258 [0001.441] Bootloader downloaded successfully. [0001.446] PT: Partition NCT NOT found ! [0001.450] Warning: Find Partition via PT Failed [0001.454] Next binary entry address: 0x92c00258 [0001.458] BoardId: 3448 [0001.463] Overriding pmu board id with proc board id [0001.468] Display board id is not available [0001.480] Verifying SC7EntryFw in SecurePKC mode [0001.532] /bpmp deleted [0001.534] SC7EntryFw header found loaded at 0xff700000 [0001.727] OVR2 PMIC [0001.729] Bpmp FW successfully loaded [0001.733] WB0 init successfully at 0xff780000 [0001.738] Set NvDecSticky Bits [0001.741] GSC2 address ff53fffc value c0edbbcc [0001.747] GSC MC Settings done [0001.751] TOS Image length 53680 [0001.754] Monitor size 53680 [0001.757] OS size 0 [0001.763] Secure Os PKC Verification Success! [0001.767] TOS image cipher info: plaintext [0001.771] Loading and Validation of Secure OS Successful [0001.786] SC7 Entry Firmware - 0xff700000, 0x4000 [0001.791] NvTbootPackSdramParams: start. [0001.796] NvTbootPackSdramParams: done. [0001.800] Tegraboot started after 134368 us [0001.804] Basic modules init took 1373809 us [0001.808] Sec Bootdevice Read Time = 545 ms, Read Size = 14461 KB [0001.814] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB [0001.820] Next stage binary read took 7378 us [0001.824] Validation of images took -19281 us [0001.828] Carveout took 1 us [0001.830] CPU initialization took 347313 us [0001.834] Total time taken by TegraBoot 1709220 us [0001.839] Starting CPU & Halting co-processor 64NOTICE: BL31: v1.3(release):fe06da916 NOTICE: BL31: Built : 18:04:17, Apr 8 2020 ERROR: Error initializing runtime service trusty_fast [0001.959] Tboot-cpu rollback check passed, continue to boot.. [0001.967] RamCode = 0 [0001.972] LPDDR4 Training: Read DT: Number of tables = 2 [0001.977] EMC Training (SRC-freq: 204000; DST-freq: 1600000) [0001.989] EMC Training Successful [0001.992] 408000 not found in DVFS table [0001.999] RamCode = 0 [0002.002] DT Write: emc-table@204000 succeeded [0002.008] DT Write: emc-table@1600000 succeeded [0002.012] LPDDR4 Training: Write DT: Number of tables = 2 [0002.070] [0002.071] Debug Init done [0002.073] Marked DTB cacheable [0002.076] Bootloader DTB loaded at 0x83000000 [0002.081] Marked DTB cacheable [0002.084] Kernel DTB loaded at 0x83100000 [0002.088] DeviceTree Init done [0002.103] Pinmux applied successfully [0002.108] gicd_base: 0x50041000 [0002.111] gicc_base: 0x50042000 [0002.114] Interrupts Init done [0002.118] Using base:0x60005090 & irq:208 for tick-timer [0002.124] Using base:0x60005098 for delay-timer [0002.128] platform_init_timer: DONE [0002.132] Timer(tick) Init done [0002.135] osc freq = 38400 khz [0002.140] [0002.141] Welcome to L4T Cboot [0002.144] [0002.145] Cboot Version: 00.00.2018.01-t210-40c3ff9c [0002.150] calling constructors [0002.153] initializing heap [0002.155] initializing threads [0002.158] initializing timers [0002.161] creating bootstrap completion thread [0002.166] top of bootstrap2() [0002.168] CPU: ARM Cortex A57 [0002.171] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000 [0002.176] initializing platform [0002.230] Config for emmc ddr50 mode completed [0002.234] sdmmc bdev is already initialized [0002.238] Enable APE clock [0002.241] Un-powergate APE partition [0002.245] of_register: registering tegra_udc to of_hal [0002.250] of_register: registering inv20628-driver to of_hal [0002.255] of_register: registering ads1015-driver to of_hal [0002.261] of_register: registering lp8557-bl-driver to of_hal [0002.267] of_register: registering bq2419x_charger to of_hal [0002.272] of_register: registering bq27441_fuel_gauge to of_hal [0002.284] gpio framework initialized [0002.287] of_register: registering tca9539_gpio to of_hal [0002.293] of_register: registering tca9539_gpio to of_hal [0002.298] of_register: registering i2c_bus_driver to of_hal [0002.304] of_register: registering i2c_bus_driver to of_hal [0002.309] of_register: registering i2c_bus_driver to of_hal [0002.315] pmic framework initialized [0002.318] of_register: registering max77620_pmic to of_hal [0002.324] regulator framework initialized [0002.328] of_register: registering tps65132_bl_driver to of_hal [0002.333] initializing target [0002.339] gpio_driver_register: register 'tegra_gpio_driver' driver [0002.350] fixed regulator driver initialized [0002.368] initializing OF layer [0002.371] NCK carveout not present [0002.374] Skipping dts_overrides [0002.378] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.395] I2C Bus Init done [0002.398] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.408] I2C Bus Init done [0002.411] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.421] I2C Bus Init done [0002.424] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.434] I2C Bus Init done [0002.437] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.447] I2C Bus Init done [0002.450] of_children_init: Ops found for compatible string maxim,max77620 [0002.460] max77620_init using irq 118 [0002.465] register 'maxim,max77620' pmic [0002.469] gpio_driver_register: register 'max77620-gpio' driver [0002.476] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0002.486] I2C Bus Init done [0002.490] NCK carveout not present [0002.500] Find /i2c@7000c000's alias i2c0 [0002.504] get eeprom at 1-a0, size 256, type 0 [0002.513] Find /i2c@7000c500's alias i2c2 [0002.517] get eeprom at 3-a0, size 256, type 0 [0002.521] get eeprom at 3-ae, size 256, type 0 [0002.525] pm_ids_update: Updating 1,a0, size 256, type 0 [0002.531] I2C slave not started [0002.534] I2C write failed [0002.536] Writing offset failed [0002.539] eeprom_init: EEPROM read failed [0002.543] pm_ids_update: eeprom init failed [0002.547] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.578] pm_ids_update: The pm board id is 3448-0002-400 [0002.584] Adding plugin-manager/ids/3448-0002-400=/i2c@7000c500:module@0x50 [0002.592] pm_ids_update: pm id update successful [0002.597] pm_ids_update: Updating 3,ae, size 256, type 0 [0002.602] I2C slave not started [0002.605] I2C write failed [0002.608] Writing offset failed [0002.611] eeprom_init: EEPROM read failed [0002.615] pm_ids_update: eeprom init failed [0002.645] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0002.651] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0002.659] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0002.665] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0002.674] updating /chosen/nvidia,ethernet-mac node 00:04:4b:ea:65:3f [0002.680] Plugin Manager: Parse ODM data 0x00094000 [0002.690] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0002.711] Find /i2c@7000c000's alias i2c0 [0002.715] get eeprom at 1-a0, size 256, type 0 [0002.724] Find /i2c@7000c500's alias i2c2 [0002.728] get eeprom at 3-a0, size 256, type 0 [0002.732] get eeprom at 3-ae, size 256, type 0 [0002.737] pm_ids_update: Updating 1,a0, size 256, type 0 [0002.742] I2C slave not started [0002.745] I2C write failed [0002.748] Writing offset failed [0002.751] eeprom_init: EEPROM read failed [0002.755] pm_ids_update: eeprom init failed [0002.759] pm_ids_update: Updating 3,a0, size 256, type 0 [0002.789] pm_ids_update: The pm board id is 3448-0002-400 [0002.796] Adding plugin-manager/ids/3448-0002-400=/i2c@7000c500:module@0x50 [0002.802] pm_ids_update: pm id update successful [0002.807] pm_ids_update: Updating 3,ae, size 256, type 0 [0002.812] I2C slave not started [0002.815] I2C write failed [0002.818] Writing offset failed [0002.821] eeprom_init: EEPROM read failed [0002.825] pm_ids_update: eeprom init failed [0002.855] Add serial number:1423620007180 as DT property [0002.863] Applying platform configs [0002.870] platform-init is not present. Skipping [0002.874] calling apps_init() [0002.890] Found 17 GPT partitions in "sdmmc3_user" [0002.895] Proceeding to Cold Boot [0002.898] starting app android_boot_app [0002.902] Cboot RB passed, continue to boot.. [0002.906] Device state: unlocked [0002.909] display console init [0002.918] could not find regulator [0002.941] hdmi cable not connected [0002.944] is_hdmi_needed: HDMI not connected, returning false [0002.950[0002.954] DT entry for leds-pwm not found ] hdmi is not connected [0002.961] sor0 is not supported [0002.964] display_console_init: no valid display out_type [0002.972] subnode volume_up is not found ! [0002.976] subnode back is not found ! [0002.979] subnode volume_down is not found ! [0002.984] subnode menu is not found ! [0002.987] Gpio keyboard init success [0003.034] found decompressor handler: lz4-legacy [0003.048] decompressing blob (type 1)... [0003.080] display_resolution: No display init [0003.084] Failed to retrieve display resolution [0003.089] Could not load/initialize BMP blob...ignoring [0003.139] decompressor handler not found [0003.142] load_firmware_blob: Firmware blob loaded, entries=2 [0003.148] SE operation failed [0003.151] bl_battery_charging: connected to external power supply [0003.158] xusb is supported [0003.164] error while finding nvidia,portmap [0003.669] xusb blob version 0 size 124416 [0003.672] firmware size 124416 [0003.677] Firmware timestamp: 0x5da88fc3, Version: 50.25 release [0003.691] xhci0: 64 bytes context size, 32-bit DMA [0003.731] usbus0: 5.0Gbps Super Speed USB v3.0 [0003.751] uhub0: on usbus0 [0004.401] uhub0: 9 ports with 9 removable, self powered [0005.401] failed to get HID devices [0005.404] failed to init xhci or no usb device attached [0005.412] display_console_ioctl: No display init [0005.417] switch_backlight failed [0005.426] device_query_partition_size: failed to open partition sdmmc3_user:MSC ! [0005.433] MSC Partition not found [0005.443] device_query_partition_size: failed to open partition sdmmc3_user:USP ! [0005.451] USP partition read failed! [0005.454] blob_init: blob-partition USP header read failed [0005.460] android_boot Unable to update recovery partition [0005.465] kfs_getpartname: name = LNX [0005.469] Loading kernel from LNX [0005.494] Verifying boot image in SecurePKC mode [0005.534] load kernel from storage [0005.544] decompressor handler not found [0005.563] Successfully loaded kernel and ramdisk images [0005.570] display_resolution: No display init [0005.574] Failed to retrieve display resolution [0005.578] bmp blob is not loaded and initialized [0005.583] Failed to display boot-logo [0005.586] NCK carveout not present [0005.590] Skipping dts_overrides [0005.593] NCK carveout not present [0005.603] Find /i2c@7000c000's alias i2c0 [0005.607] get eeprom at 1-a0, size 256, type 0 [0005.616] Find /i2c@7000c500's alias i2c2 [0005.620] get eeprom at 3-a0, size 256, type 0 [0005.624] get eeprom at 3-ae, size 256, type 0 [0005.628] pm_ids_update: Updating 1,a0, size 256, type 0 [0005.634] I2C slave not started [0005.637] I2C write failed [0005.639] Writing offset failed [0005.642] eeprom_init: EEPROM read failed [0005.646] pm_ids_update: eeprom init failed [0005.650] pm_ids_update: Updating 3,a0, size 256, type 0 [0005.681] pm_ids_update: The pm board id is 3448-0002-400 [0005.687] Adding plugin-manager/ids/3448-0002-400=/i2c@7000c500:module@0x50 [0005.695] pm_ids_update: pm id update successful [0005.700] pm_ids_update: Updating 3,ae, size 256, type 0 [0005.705] I2C slave not started [0005.708] I2C write failed [0005.711] Writing offset failed [0005.714] eeprom_init: EEPROM read failed [0005.718] pm_ids_update: eeprom init failed [0005.748] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0005.754] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0005.762] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0005.768] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0005.777] updating /chosen/nvidia,ethernet-mac node 00:04:4b:ea:65:3f [0005.783] Plugin Manager: Parse ODM data 0x00094000 [0005.793] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0005.808] Add serial number:1423620007180 as DT property [0005.817] "bpmp" doesn't exist, creating [0005.822] Updated bpmp info to DTB [0005.827] Updated initrd info to DTB [0005.831] "proc-board" doesn't exist, creating [0005.836] Updated board info to DTB [0005.840] "pmu-board" doesn't exist, creating [0005.845] Updated board info to DTB [0005.849] "display-board" doesn't exist, creating [0005.854] Updated board info to DTB [0005.858] "reset" doesn't exist, creating [0005.862] Updated reset info to DTB [0005.866] display_console_ioctl: No display init [0005.870] display_console_ioctl: No display init [0005.875] display_console_ioctl: No display init [0005.879] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 [0005.913] DTB cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0005.926] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0005.938] Updated bootarg info to DTB [0005.942] Adding uuid 000000016445c8490c00000016010200 to DT [0005.948] Adding eks info 0 to DT [0005.953] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7 [0005.959] Updated memory info to DTB [0005.968] set vdd_core voltage to 1125 mv [0005.972] setting 'vdd-core' regulator to 1125000 micro volts [0005.991] Found secure-pmc; disable BPMP U-Boot 2016.07 (Apr 13 2021 - 11:56:27 +0800) TEGRA210 Model: NVIDIA P3450-Porg Board: NVIDIA P3450-PORG DRAM: 4 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 SF: Failed to get idcodes *** Warning - spi_flash_probe() failed, using default environment In: serial Out: serial Err: serial update /chosen/nvidia,ethernet-mac to 02:73:02:12:00:18 ERR : checksum of lte mac from eeprom mismatchs ! i2c_lt9611 enter Net: No ethernet found. Card did not respond to voltage select! ** Bad device mmc 1 ** Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 733 bytes read in 124 ms (4.9 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 5487746 bytes read in 241 ms (21.7 MiB/s) Retrieving file: /boot/Image 36016136 bytes read in 846 ms (40.6 MiB/s) append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 83100000 Booting using the fdt blob at 0x83100000 reserving fdt memory region: addr=80000000 size=20000 Using Device Tree in place at 0000000083100000, end 000000008317853c Starting kernel ... [ 1.138237] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.150875] lt6911c 6-002b: detected lt6911c sensor [ 1.615540] [dhd] dhd_conf_set_chiprev : chip=0x4345, chiprev=6 [ 1.832356] cgroup: cgroup2: unknown option "nsdelegate" [ 2.951230] using random self ethernet address [ 2.974835] using random host ethernet address [ 3.031187] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0 [ 3.492907] random: crng init done [ 3.496307] random: 7 urandom warning(s) missed due to ratelimiting [ 3.656015] using random self ethernet address [ 3.673821] using random host ethernet address [ 3.990663] [dhd] dhd_conf_read_config : Ignore config file /lib/firmware/brcm/config.txt [ 4.002164] [dhd] dhd_conf_set_path_params : Final fw_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin [ 4.011552] [dhd] dhd_conf_set_path_params : Final nv_path=/lib/firmware/brcm/nvram_ap6255.txt [ 4.020456] [dhd] dhd_conf_set_path_params : Final clm_path=/lib/firmware/brcm/clm_bcm43455c0_ag.blob [ 4.030048] [dhd] dhd_conf_set_path_params : Final conf_path=/lib/firmware/brcm/config.txt [ 4.222782] tegra_cec 70015000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.230366] tegra_cec 70015000.tegra_cec: Sent res: -62. [ 4.236997] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 4.243046] [dhd] dhd_conf_set_txglom_params : txglom_mode=multi-desc [ 4.243048] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0 [ 4.243050] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1 [ 4.243052] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300 [ 4.243057] [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1 [ 4.286219] [dhd] dhd_conf_map_country_list : CN/38 [ 4.291128] [dhd] dhd_conf_set_country : set country CN, revision 38 [ 4.300504] [dhd] dhd_conf_set_country : Country code: CN (CN/38) [ 4.311733] [dhd-wlan0] wl_android_wifi_on : Success [ 9.710116] systemd-journald[1981]: File /var/log/journal/7439f0df385b47b0a08080eae6a06c3f/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. Ubuntu 18.04.5 LTS localhost ttyS0 localhost login: