hmecd001409@DSC:~/BSP/flashdir/Linux_for_Tegra$ sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_external.xml -p “-c bootloader/t186ref/cfg/flash_t234_qspi.xml” –showlogs --network usb0 jetson-orin-nano-devkit internal /home/hmecd001409/BSP/flashdir/Linux_for_Tegra/tools/kernel_flash/l4t_initrd_flash_internal.sh --no-flash --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_external.xml -p “-c bootloader/t186ref/cfg/flash_t234_qspi.xml” –showlogs --network usb0 jetson-orin-nano-devkit internal ************************************ * * * Step 1: Generate flash packages * * * ************************************ Create folder to store images to flash Generate image for internal storage devices Generate images to be flashed ADDITIONAL_DTB_OVERLAY="" /home/hmecd001409/BSP/flashdir/Linux_for_Tegra/flash.sh --no-flash --sign “-c jetson-orin-nano-devkit internal ############################################################################### # L4T BSP Information: # R35 , REVISION: 3.1 # User release: 0.0 ############################################################################### copying emc_fuse_dev_params(/home/hmecd001409/BSP/flashdir/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-br-bct-diag-boot.dts)... done. copying device_config(/home/hmecd001409/BSP/flashdir/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-device-p3767-0000.dts)... done. copying misc_config(/home/hmecd001409/BSP/flashdir/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-misc-p3767-0000.dts)... done. ./tegraflash.py --chip 0x23 --applet "/home/hmecd001409/BSP/flashdir/Linux_for_Tegra/bootloader/mb1_t234_prod.bin" --skipuid --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --device_config tegra234-mb1-bct-device-p3767-0000.dts --misc_config tegra234-mb1-bct-misc-p3767-0000.dts --bins "mb2_applet applet_t234.bin" --cmd "dump eeprom cvm cvm.bin; dump custinfo custinfo_out.bin; reboot recovery" Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0224 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet [ 0.0235 ] File rcm_state open failed [ 0.0239 ] ERROR: failed to read rcm_state [ 0.0240 ] [ 0.0257 ] tegrasign_v3.py --key None --getmode mode.txt [ 0.0261 ] Assuming zero filled SBK key [ 0.0247 ] Pre-processing config: tegra234-mb1-bct-device-p3767-0000.dts [ 0.0320 ] Pre-processing config: tegra234-mb1-bct-misc-p3767-0000.dts [ 0.0420 ] Parsing partition layout [ 0.0431 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 0.0449 ] Kernel DTB used: None [ 0.0450 ] WARNING: dce base dtb is not provided [ 0.0450 ] Parsing partition layout [ 0.0460 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 0.0473 ] Creating list of images to be signed [ 0.0483 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --list images_list.xml zerosbk [ 0.0493 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 0.0505 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 0.0509 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 0.0555 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 0.0562 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 0.0607 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 0.0611 ] adding BCH for mb2_t234_aligned.bin [ 0.0639 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 0.0766 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 0.0769 ] adding BCH for mb2_t234_aligned.bin [ 0.0917 ] Filling MB1 storage info [ 0.0918 ] Parsing dev params for multi chains [ 0.0992 ] Generating br-bct [ 0.1003 ] Updating dev and MSS params in BR BCT [ 0.1004 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 0.1019 ] Updating bl info [ 0.1030 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin [ 0.1040 ] WARNING: boot chain is not completed. set to 0 [ 0.1049 ] Generating signatures [ 0.1066 ] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1069 ] Assuming zero filled SBK key [ 0.1206 ] Warning: pub_key.key is not found [ 0.1192 ] Parsing dev params for multi chains [ 0.1193 ] Generating br-bct [ 0.1202 ] Updating dev and MSS params in BR BCT [ 0.1204 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 0.1216 ] Updating bl info [ 0.1226 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 0.1236 ] WARNING: boot chain is not completed. set to 0 [ 0.1246 ] Get Signed section of bct [ 0.1256 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --listbct bct_list.xml [ 0.1269 ] Signing BCT [ 0.1286 ] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1288 ] Assuming zero filled SBK key [ 0.1320 ] Sha saved in br_bct_BR.sha [ 0.1325 ] Warning: pub_key.key is not found [ 0.1309 ] Updating BCT with signature [ 0.1319 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml [ 0.1328 ] Offset :4608 Len :3584 [ 0.1333 ] Generating SHA2 Hash [ 0.1350 ] tegrasign_v3.py --key None --list bct_list.xml --sha sha512 [ 0.1352 ] Assuming zero filled SBK key [ 0.1353 ] Assuming zero filled SBK key [ 0.1384 ] Sha saved in br_bct_BR.sha [ 0.1372 ] Updating BCT with SHA2 Hash [ 0.1382 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesha bct_list_signed.xml [ 0.1391 ] Offset :4608 Len :3584 [ 0.1394 ] Offset :68 Len :8124 [ 0.1396 ] Generating coldboot mb1-bct [ 0.1407 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-p3767-0000_cpp.dtb --device tegra234-mb1-bct-device-p3767-0000_cpp.dtb [ 0.1417 ] MB1-BCT version: 0.10 [ 0.1418 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1423 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1426 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1429 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1433 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1433 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_locking_config is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_locking_diff_configuration is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_locking_ref_frequency_configuration is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_locking_control is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_configuration is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_locking_fast_adjust_configuration is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_delta_control is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_capture_control_ptx is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_capture_config_ptx is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_stscrsr is not supported [ 0.1433 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_num_control is not supported [ 0.1433 ] [ 0.1433 ] Parsing config file :tegra234-mb1-bct-device-p3767-0000_cpp.dtb [ 0.1433 ] Added Platform Config 9 data with size :- 100 [ 0.1433 ] [ 0.1434 ] Updating mb1-bct with firmware information [ 0.1444 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t234_min_prod.xml.bin [ 0.1472 ] tegrahost_v2 --chip 0x23 0 --align mb1_cold_boot_bct_MB1_aligned.bct [ 0.1493 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk [ 0.1503 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct [ 0.1528 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1531 ] Assuming zero filled SBK key [ 0.1550 ] Warning: pub_key.key is not found [ 0.1545 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 0.1561 ] Generating recovery mb1-bct [ 0.1572 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3767-0000_cpp.dtb --device tegra234-mb1-bct-device-p3767-0000_cpp.dtb [ 0.1582 ] MB1-BCT version: 0.10 [ 0.1584 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1589 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1593 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1596 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1600 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1600 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_locking_config is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_locking_diff_configuration is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_locking_ref_frequency_configuration is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_locking_control is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_configuration is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_locking_fast_adjust_configuration is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_delta_control is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_capture_control_ptx is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_capture_config_ptx is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_stscrsr is not supported [ 0.1601 ] ERROR: /misc/tsc_controls/tsc_locking_adjust_num_control is not supported [ 0.1601 ] [ 0.1601 ] Parsing config file :tegra234-mb1-bct-device-p3767-0000_cpp.dtb [ 0.1601 ] Added Platform Config 9 data with size :- 100 [ 0.1601 ] [ 0.1602 ] Updating mb1-bct with firmware information [ 0.1613 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo readinfo_t234_min_prod.xml.bin [ 0.1640 ] tegrahost_v2 --chip 0x23 0 --align mb1_bct_MB1_aligned.bct [ 0.1661 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk [ 0.1670 ] adding BCH for mb1_bct_MB1_aligned.bct [ 0.1696 ] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1699 ] Assuming zero filled SBK key [ 0.1718 ] Warning: pub_key.key is not found [ 0.1714 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 0.1730 ] Error: Skip generating mem_bct because sdram_config is not defined [ 0.1731 ] Error: Skip generating mem_bct because sdram_config is not defined [ 0.1731 ] Copying signatures [ 0.1741 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 0.1798 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [ 0.1800 ] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [ 0.1800 ] Boot Rom communication [ 0.1812 ] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [ 0.1822 ] BR_CID: 0x80012344705DE6406C00000017010140 [ 0.2104 ] Sending bct_br [ 0.2540 ] Sending mb1 [ 0.2552 ] Sending psc_bl1 [ 0.2664 ] Sending bct_mb1 [ 0.2726 ] Boot Rom communication completed [ 0.2772 ] tegrahost_v2 --chip 0x23 0 --align applet_t234_aligned.bin [ 0.2837 ] tegrahost_v2 --chip 0x23 0 --magicid MB2A --appendsigheader applet_t234_aligned.bin zerosbk [ 0.2867 ] adding BCH for applet_t234_aligned.bin [ 0.3171 ] tegrasign_v3.py --key None --list applet_t234_aligned_sigheader.bin_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.3176 ] Assuming zero filled SBK key [ 0.3230 ] Warning: pub_key.key is not found [ 0.3239 ] tegrahost_v2 --chip 0x23 0 --updatesigheader applet_t234_aligned_sigheader.bin.encrypt applet_t234_aligned_sigheader.bin.hash zerosbk [ 0.3286 ] Sending mb2_applet... [ 0.3309 ] tegrarcm_v2 --chip 0x23 0 --pollbl --download applet applet_t234_sigheader.bin.encrypt [ 0.3330 ] BL: version 0.32.0.0-t234-54845784-57325615 last_boot_error: 656573201 [ 0.4811 ] Sending applet [ 0.5069 ] ERROR: might be timeout in USB write. Error: Return value 3 Command tegrarcm_v2 --chip 0x23 0 --pollbl --download applet applet_t234_sigheader.bin.encrypt Reading board information failed. Error: failed to generate images Cleaning up... hmecd001409@DSC:~/BSP/flashdir/Linux_for_Tegra$