[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-1935) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:52:02 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2055168 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f676a000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29424(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7969012K/8220672K available (15230K kernel code, 2926K rwdata, 6620K rodata, 8576K init, 609K bss, 186124K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095e0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095e0000 - 0xffffff8009e40000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a11b808 ( 2927 KB) [ 0.000000] .bss : 0xffffff800a11b808 - 0xffffff800a1b3dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001658] Console: colour dummy device 80x25 [ 0.001663] console [tty0] enabled [ 0.001667] bootconsole [uart8250] disabled [ 0.001673] kmemleak: Kernel memory leak detector disabled [ 0.001683] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001690] pid_max: default: 32768 minimum: 301 [ 0.002004] Security Framework initialized [ 0.002163] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002167] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002756] ftrace: allocating 47001 entries in 184 pages [ 0.127926] sched-energy: Sched-energy-costs installed from DT [ 0.127937] ASID allocator initialised with 65536 entries [ 0.164051] tegra-id: chipid=21817. [ 0.164058] tegra-id: opt_subrevision=1. [ 0.164075] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.164083] DTS File Name: /home/opt/Documents/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-dsi-hdmi-dp.dts [ 0.164089] DTB Build time: Mar 1 2021 18:43:12 [ 0.209676] CPU1: Booted secondary processor [4e0f0030] [ 0.241311] CPU2: Booted secondary processor [4e0f0030] [ 0.273102] CPU3: Booted secondary processor [411fd073] [ 0.305093] CPU4: Booted secondary processor [411fd073] [ 0.337077] CPU5: Booted secondary processor [411fd073] [ 0.337131] Brought up 6 CPUs [ 0.337134] SMP: Total of 6 processors activated. [ 0.337139] CPU features: detected feature: 32-bit EL0 Support [ 0.337848] CPU: All CPU(s) started at EL2 [ 0.337900] alternatives: patching kernel code [ 0.347409] devtmpfs: initialized [ 0.386249] Initilizing CustomIPI irq domain [ 0.386443] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.386460] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.387311] pinctrl core: initialized pinctrl subsystem [ 0.387514] OS set in device tree is not L4T. [ 0.387678] regulator-dummy: no parameters [ 0.387819] Initializing plugin-manager [ 0.387871] Plugin module not found [ 0.387908] Plugin-manager status disabled [ 0.389709] NET: Registered protocol family 16 [ 0.390369] pstore: using zlib compression [ 0.390383] console [pstore-1] enabled [ 0.390386] pstore: Registered ramoops as persistent store backend [ 0.390390] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.408696] cpuidle: using governor menu [ 0.410150] bpmp: waiting for handshake [ 0.410154] bpmp: handshake completed [ 0.410167] bpmp: synchronizing channels [ 0.410184] bpmp: channels synchronized [ 0.410187] bpmp: mail init ok [ 0.413716] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.413728] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.413736] arm-smmu 12000000.iommu: stage 1 translation [ 0.413744] arm-smmu 12000000.iommu: stage 2 translation [ 0.413751] arm-smmu 12000000.iommu: nested translation [ 0.413762] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.413772] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.413780] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.413789] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.413798] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.419559] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000) [ 0.419598] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.422244] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.425611] Registering BPMP clocks... [ 0.425729] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.429171] tegra_powergate_init: DONE [ 0.429185] DTS File Name: /home/opt/Documents/Linux_for_Tegra/source/public/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-dsi-hdmi-dp.dts [ 0.429196] DTB Build time: Mar 1 2021 18:43:12 [ 0.432827] Tegra reboot handler registered. [ 0.435115] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.435280] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.435298] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.435303] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.435308] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.435605] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.435621] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.436062] iommu: Adding device 3460000.sdhci to group 0 [ 0.437044] iommu: Adding device 3400000.sdhci to group 1 [ 0.439127] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.439152] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.439950] iommu: Adding device 3160000.i2c to group 3 [ 0.440563] iommu: Adding device c240000.i2c to group 4 [ 0.441063] iommu: Adding device 3180000.i2c to group 5 [ 0.441556] iommu: Adding device 3190000.i2c to group 6 [ 0.442212] iommu: Adding device 31b0000.i2c to group 7 [ 0.442653] iommu: Adding device 31c0000.i2c to group 8 [ 0.443131] iommu: Adding device c250000.i2c to group 9 [ 0.443569] iommu: Adding device 31e0000.i2c to group 10 [ 0.445991] iommu: Adding device 3210000.spi to group 11 [ 0.446449] iommu: Adding device c260000.spi to group 12 [ 0.446874] iommu: Adding device 3240000.spi to group 13 [ 0.447870] iommu: Adding device 3100000.serial to group 14 [ 0.448351] iommu: Adding device 3110000.serial to group 15 [ 0.448780] iommu: Adding device c280000.serial to group 16 [ 0.449261] iommu: Adding device 3130000.serial to group 17 [ 0.451058] iommu: Adding device 2490000.ether_qos to group 18 [ 0.451084] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.452125] iommu: Adding device b000000.rtcpu to group 19 [ 0.454860] iommu: Adding device 13e10000.host1x to group 20 [ 0.455342] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.455750] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.456143] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.457133] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.457603] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.458060] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.458461] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.458858] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.459479] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.460329] iommu: Adding device 15700000.vi to group 30 [ 0.460769] iommu: Adding device 15600000.isp to group 31 [ 0.461439] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.462183] iommu: Adding device 15220000.nvdisplay to group 33 [ 0.462878] iommu: Adding device 15340000.vic to group 34 [ 0.463177] iommu: Adding device 154c0000.nvenc to group 35 [ 0.463489] iommu: Adding device 15480000.nvdec to group 36 [ 0.463926] iommu: Adding device 15380000.nvjpg to group 37 [ 0.464202] iommu: Adding device 15500000.tsec to group 38 [ 0.464512] iommu: Adding device 15100000.tsecb to group 39 [ 0.465857] iommu: Adding device 15810000.se to group 40 [ 0.466151] iommu: Adding device 15820000.se to group 41 [ 0.466468] iommu: Adding device 15830000.se to group 42 [ 0.466739] iommu: Adding device 15840000.se to group 43 [ 0.467846] iommu: Adding device smmu_test to group 44 [ 0.468654] mc: mapped MMIO address: 0xffffff800a690000 -> 0x2c10000 [ 0.468674] mc: mapped MMIO address: 0xffffff800a6b0000 -> 0x2c20000 [ 0.468691] mc: mapped MMIO address: 0xffffff800a6d0000 -> 0x2c30000 [ 0.468708] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.468724] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.468738] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.468753] mc-err: mcerr ops are set to t18x [ 0.468996] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.470433] iommu: Adding device 3530000.xhci to group 45 [ 0.470460] arm-smmu: forcing sodev map for 3530000.xhci [ 0.471024] iommu: Adding device 3550000.xudc to group 46 [ 0.471047] arm-smmu: forcing sodev map for 3550000.xudc [ 0.471986] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.471997] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.472733] iommu: Adding device 17000000.gp10b to group 47 [ 0.474125] tegra-reset 5000000.clock: registered 193 resets. [ 0.476934] iommu: Adding device d000000.bpmp to group 48 [ 0.477254] bpmp: ping status is 0 [ 0.477412] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.481369] bpmp d000000.bpmp: probe ok [ 0.485514] iommu: Adding device 2600000.dma to group 49 [ 0.487188] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.487245] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.487283] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.487342] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.487377] GPIO line 424 (wifi-enable) hogged as output/high [ 0.487410] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.487444] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.487777] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.493537] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.493843] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.496161] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.496187] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.496585] iommu: Adding device sound to group 51 [ 0.497067] iommu: Adding device 3510000.hda to group 52 [ 0.497330] random: fast init done [ 0.507469] iommu: Adding device c1a0000.aon to group 53 [ 0.508033] vdd-ac-bat: 5000 mV [ 0.510535] vdd-1v8-ap: 1800 mV [ 0.542308] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.547378] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.547878] SCSI subsystem initialized [ 0.548119] libata version 3.00 loaded. [ 0.548373] usbcore: registered new interface driver usbfs [ 0.548424] usbcore: registered new interface driver hub [ 0.548536] usbcore: registered new device driver usb [ 0.551476] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ 0.551518] pca953x 0-0074: failed reading register [ 0.551638] pca953x: probe of 0-0074 failed with error -121 [ 0.552043] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.552078] pca953x 0-0077: failed reading register [ 0.552153] pca953x: probe of 0-0077 failed with error -121 [ 0.564438] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.569871] vddio-ddr: at 1125 mV [ 0.573703] avdd_dsi_csi: 1200 mV [ 0.577734] vdd-1v8: 1800 mV [ 0.581707] vdd-3v3-sys: 3300 mV [ 0.582706] spmic-ldo0: at 1800 mV [ 0.583513] spmic-ldo1: at 800 mV [ 0.585704] vddio-3v3: 3300 mV [ 0.586606] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.589349] vdd-rtc: at 800 mV [ 0.590105] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.593342] spmic-ldo6: at 1500 mV [ 0.597342] vdd-pex-1v00: 1000 mV [ 0.598086] dvdd-pex: 1000 mV [ 0.600763] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.600931] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.601158] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.601451] max77620 4-003c: max77620 probe successful [ 0.601905] media: Linux media interface: v0.10 [ 0.601946] Linux video capture interface: v2.00 [ 0.606095] pps_core: LinuxPPS API ver. 1 registered [ 0.606102] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.606120] PTP clock support registered [ 0.606620] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.606682] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.610151] tegra_fiq_debugger_init: found FIQ source (IRQ 388) [ 0.615502] trusty trusty: trusty version: Built: 22:43:54 Dec 9 2019 [ 0.615540] trusty trusty: selected api version: 3 (requested 3) [ 0.616505] Advanced Linux Sound Architecture Driver Initialized. [ 0.616959] Bluetooth: Core ver 2.22 [ 0.617027] NET: Registered protocol family 31 [ 0.617032] Bluetooth: HCI device and connection manager initialized [ 0.617043] Bluetooth: HCI socket layer initialized [ 0.617051] Bluetooth: L2CAP socket layer initialized [ 0.617107] Bluetooth: SCO socket layer initialized [ 0.617990] en-vdd-sd: 3300 mV [ 0.618561] vdd-usb0-5v: 5000 mV [ 0.618949] vdd-usb1-5v: 5000 mV [ 0.619537] vdd-3v3: 3300 mV [ 0.619809] en-vdd-vcm-2v8: 2800 mV [ 0.620093] vdd-sys-bl: 3300 mV [ 0.623143] camchar: rtcpu character device driver loaded [ 0.623810] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.625759] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.626545] clocksource: Switched to clocksource arch_sys_counter [ 0.665894] VFS: Disk quotas dquot_6.6.0 [ 0.666127] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.666792] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.667815] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.667825] nvmap_page_pool_init: Total RAM pages: 2008637 [ 0.667832] nvmap_page_pool_init: nvmap page pool size: 251079 pages (980 MB) [ 0.668022] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.671599] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.683664] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.683865] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.684351] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.684454] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.684599] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.684739] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.684931] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.685239] la/ptsa driver initialized. [ 0.685252] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.685257] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.686384] NET: Registered protocol family 2 [ 0.688415] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.689201] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.689960] TCP: Hash tables configured (established 65536 bind 65536) [ 0.690013] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.690138] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.691104] NET: Registered protocol family 1 [ 0.692314] RPC: Registered named UNIX socket transport module. [ 0.692320] RPC: Registered udp transport module. [ 0.692325] RPC: Registered tcp transport module. [ 0.692330] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.692349] PCI: CLS 0 bytes, default 64 [ 0.692681] Trying to unpack rootfs image as initramfs... [ 0.875323] Freeing initrd memory: 5432K [ 0.896206] host1x 13e10000.host1x: initialized [ 0.897647] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.902699] audit: initializing netlink subsys (disabled) [ 0.902755] audit: type=2000 audit(0.796:1): initialized [ 0.903474] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.914995] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.917528] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.919115] 9p: Installing v9fs 9p2000 file system support [ 0.925738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.925960] io scheduler noop registered [ 0.926620] io scheduler cfq registered (default) [ 0.931601] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.054904] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 1.095453] iommu: Adding device 2993000.adsp to group 55 [ 1.096650] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.099692] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.103043] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.104217] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.105313] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.106378] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.109785] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 1.110997] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.111440] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 1.111712] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.111908] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.111918] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 1.114770] tegra-pcie 10003000.pcie-controller: probing port 1, using 1 lanes [ 1.116130] tsec 15500000.tsec: initialized [ 1.117337] tsec 15100000.tsecb: initialized [ 1.121111] nvdec 15480000.nvdec: initialized [ 1.128175] falcon 15340000.vic: initialized [ 1.129531] falcon 154c0000.nvenc: initialized [ 1.131282] falcon 15380000.nvjpg: initialized [ 1.135727] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.137329] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.139005] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.140563] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.142130] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.143701] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.145220] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.146780] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.150256] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.150269] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.150304] tegradccommon 15200000.dc_common: dma mapping done [ 1.151099] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.151168] generic_infoframe_type: 0x87 [ 1.151329] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.151356] tegradc 15210000.nvdisplay: Display dc.ffffff800b690000 registered with id=0 [ 1.151661] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=392 [ 1.152378] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.153058] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.153086] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.153305] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.153312] tegra_cec 3960000.tegra_cec: probed [ 1.157287] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.157291] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.157293] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.157459] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.157464] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.158283] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 1.165535] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.165545] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.170285] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.171063] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.171570] kfuse 3830000.kfuse: initialized [ 1.173191] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.177761] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.181089] console [ttyS0] disabled [ 1.181153] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.186953] tegradc 15210000.nvdisplay: probed [ 1.200559] console [ttyS0] enabled [ 1.201261] Console: switching to colour frame buffer device 240x67 [ 1.201419] tegradc 15210000.nvdisplay: fb registered [ 1.201733] gpio tegra-gpio wake21 for gpio=121(P:1) [ 1.202860] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.203027] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.203160] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.211196] Parent Clock set for DC plld2 [ 1.211260] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 1.215287] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 1.215576] serial-tegra 3130000.serial: RX in PIO mode [ 1.216080] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.216679] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 1.217777] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.217788] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.218192] [drm] Initialized [ 1.228938] brd: module loaded [ 1.233990] loop: module loaded [ 1.234083] tegra_profiler: version: 1.139, samples/io: 47/27 [ 1.234221] tegra_profiler: auth: init [ 1.234759] nct1008_nct72 7-004c: starting parse dt [ 1.234909] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 1.234921] nct1008_nct72 7-004c: success parsing dt [ 1.235049] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 1.235271] THERMAL EST: found 3 subdevs [ 1.235313] THERMAL EST num_resources: 0 [ 1.235356] [THERMAL EST subdev 0] [ 1.235363] [THERMAL EST subdev 1] [ 1.235368] [THERMAL EST subdev 2] [ 1.235673] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.235678] THERMAL EST: thz register success. [ 1.235816] THERMAL EST: end of probe, return err: 0 [ 1.236856] hisi_sas: driver version v1.6 [ 1.237660] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.237665] Extcon AUX1(HDMI) enable [ 1.238260] tegradc 15220000.nvdisplay: disp1 connected to head2->/host1x/sor [ 1.238448] tegradc 15220000.nvdisplay: DT parsed successfully [ 1.238468] tegradc 15220000.nvdisplay: Display dc.ffffff800ba20000 registered with id=1 [ 1.238797] tegradc 15220000.nvdisplay: vblank syncpt # 11 for dc 2 [ 1.238802] tegradc 15220000.nvdisplay: vpulse3 syncpt # 12 for dc 2 [ 1.242523] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.242600] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.243596] scsi host0: tegra_ahci [ 1.244562] scsi host1: tegra_ahci [ 1.244748] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 1.244754] ata2: DUMMY [ 1.250040] tegradc 15220000.nvdisplay: probed [ 1.250376] tegradc 15220000.nvdisplay: fb registered [ 1.252055] libphy: Fixed MDIO Bus: probed [ 1.252493] tun: Universal TUN/TAP device driver, 1.6 [ 1.252499] tun: (C) 1999-2004 Max Krasnyansky [ 1.253633] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.253638] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.253646] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.253654] tegradc 15220000.nvdisplay: blank - powerdown [ 1.253664] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.253667] Extcon DP: HPD disabled [ 1.253669] hpd: hpd_switch 0 [ 1.253672] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.253681] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.253688] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.253988] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.253995] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.254069] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.254075] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.254118] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.254122] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.254165] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.254170] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.262770] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.266575] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c4 f5 2b [ 1.266729] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 1.266753] libphy: dwc_phy: probed [ 1.267197] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.267311] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 1.269542] PPP generic driver version 2.4.2 [ 1.269754] PPP BSD Compression module registered [ 1.269761] PPP Deflate Compression module registered [ 1.269808] PPP MPPE Compression module registered [ 1.269814] NET: Registered protocol family 24 [ 1.269873] usbcore: registered new interface driver r8152 [ 1.269910] usbcore: registered new interface driver asix [ 1.269950] usbcore: registered new interface driver ax88179_178a [ 1.269976] usbcore: registered new interface driver cdc_ether [ 1.270015] usbcore: registered new interface driver net1080 [ 1.270052] usbcore: registered new interface driver cdc_subset [ 1.270089] usbcore: registered new interface driver zaurus [ 1.270135] usbcore: registered new interface driver cdc_ncm [ 1.270311] VFIO - User Level meta-driver version: 0.3 [ 1.272088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272106] ehci-pci: EHCI PCI platform driver [ 1.272143] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.272155] ohci-pci: OHCI PCI platform driver [ 1.272203] ohci-platform: OHCI generic platform driver [ 1.278444] tegra-xusb 3530000.xhci: No USB port has OTG_CAP [ 1.281400] usbcore: registered new interface driver uas [ 1.281439] usbcore: registered new interface driver usb-storage [ 1.281515] usbcore: registered new interface driver usbserial [ 1.282597] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-07-08 19:32:42 UTC, Version: 55.15 release [ 1.286083] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.287225] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.287255] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.288599] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.289015] mousedev: PS/2 mouse device common for all mice [ 1.289087] usbcore: registered new interface driver xpad [ 1.300259] nct1008_nct72 7-004c: initial LOC temp: 34000 [ 1.300599] nct1008_nct72 7-004c: initial EXT temp: 37500 [ 1.301279] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.301697] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.301902] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.338623] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.338645] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.339502] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.339546] tegra-xusb 3530000.xhci: irq 72, io mem 0x03530000 [ 1.339787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.339795] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.339801] usb usb1: Product: xHCI Host Controller [ 1.339807] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.339812] usb usb1: SerialNumber: 3530000.xhci [ 1.340332] hub 1-0:1.0: USB hub found [ 1.340426] hub 1-0:1.0: 4 ports detected [ 1.340825] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.340838] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.341044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.341051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.341056] usb usb2: Product: xHCI Host Controller [ 1.341062] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.341067] usb usb2: SerialNumber: 3530000.xhci [ 1.341527] hub 2-0:1.0: USB hub found [ 1.341615] hub 2-0:1.0: 3 ports detected [ 1.354565] tegradc 15210000.nvdisplay: blank - powerdown [ 1.401445] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.401447] Extcon AUX1(HDMI) disable [ 1.419001] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.420355] Wake73 for irq=42 [ 1.421612] rtc rtc1: alarm rtc device [ 1.421628] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.421655] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.421834] i2c /dev entries driver [ 1.429132] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.429305] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.429806] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.433970] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.478911] parse_throttle_dt_data: Num cap clks = 4 [ 1.478978] parse_throttle_dt_data: clk=mcpu type=1 [ 1.479013] parse_throttle_dt_data: clk=bcpu type=2 [ 1.479150] parse_throttle_dt_data: clk=gpu type=4 [ 1.479161] parse_throttle_dt_data: clk=emc type=3 [ 1.486168] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.492455] FAN: coudln't get the regulator [ 1.498238] device-mapper: uevent: version 1.0.3 [ 1.502071] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.506640] CPU EMC frequency mapping table: default setting [ 1.529408] cpufreq: platform driver Initialization: pass [ 1.529981] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.530083] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.530786] sdhci: Secure Digital Host Controller Interface driver [ 1.530788] sdhci: Copyright(c) Pierre Ossman [ 1.530790] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.532102] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.533981] CMDQ: cmdq_platfm_init successful [ 1.535100] CQE: CMD_TIMING bit set for R1B DCMD [ 1.535124] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.535529] tegradc 15210000.nvdisplay: unblank [ 1.536621] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.536717] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.536796] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.537912] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.538096] Parent Clock set for DC plld2 [ 1.538612] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.540651] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.541152] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.543228] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 259 [ 1.547565] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.548469] tegra-se-nvhost 15810000.se: initialized [ 1.549517] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.550169] tegra-se-nvhost 15820000.se: initialized [ 1.551206] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.552075] tegra-se-nvhost 15830000.se: initialized [ 1.552821] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.553458] tegra-se-nvhost 15840000.se: initialized [ 1.554245] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.554458] hidraw: raw HID events driver (C) Jiri Kosina [ 1.555411] usbcore: registered new interface driver usbhid [ 1.555414] usbhid: USB HID core driver [ 1.557312] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 1.557339] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.557423] ina3221x: probe of 0-0042 failed with error -121 [ 1.557610] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 1.557636] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 1.557699] ina3221x: probe of 0-0043 failed with error -121 [ 1.558575] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.559538] ata1: SATA link down (SStatus 0 SControl 300) [ 1.560072] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.562497] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.562769] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.562876] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.563049] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.564055] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.564116] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.564159] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.564195] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.564296] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.564597] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 1.564599] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.565468] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 1.566915] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.567297] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.567438] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.567502] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.567779] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.567781] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.567782] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.567826] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.567827] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.567828] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.567868] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.567870] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.567871] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.567911] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.567912] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.567913] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.567953] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.567955] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.567956] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.567999] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568003] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.568004] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.568047] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568051] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.568052] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.568092] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568095] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.568097] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.568136] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568140] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.568141] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.568180] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568181] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.568183] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.568222] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568227] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.568228] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.568274] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568278] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.568279] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.568320] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568324] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.568325] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.568364] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568369] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.568370] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.568413] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.568416] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.568417] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.568467] **** A57 ECC: Enabled [ 1.568468] tegra18_a57_serr_init: on CPU 4 a A57 Core [ 1.568518] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.569002] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.569353] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.569454] denver_knobs_init:MTS_VERSION:47926945 [ 1.571011] nvpmodel: initialized successfully [ 1.571757] trusty-virtio trusty:virtio: initializing [ 1.571845] trusty_ipc virtio0: vring0: va(pa) ffffffc1e549e000(0) qsz 32 notifyid 1 [ 1.571850] trusty_ipc virtio0: vring1: va(pa) ffffffc1e54b4000(0) qsz 32 notifyid 2 [ 1.571916] trusty-virtio trusty:virtio: initializing done [ 1.572057] trusty_ipc virtio0: is online [ 1.573198] usbcore: registered new interface driver snd-usb-audio [ 1.578591] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.578596] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.580592] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.581324] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.598645] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.598705] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.644148] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.658398] mmc0: periodic cache flush enabled [ 1.658410] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.658886] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 1.659109] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 1.663330] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 1.663505] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 1.666587] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.666980] OPE platform probe [ 1.667061] OPE platform probe successful [ 1.669664] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.700627] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ 1.700633] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.700637] usb 1-2: Product: USB2.0 Hub [ 1.700639] usb 1-2: Manufacturer: GenesysLogic [ 1.703129] hub 1-2:1.0: USB hub found [ 1.704175] hub 1-2:1.0: 4 ports detected [ 1.740897] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.740972] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.741050] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.741120] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.741189] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.741264] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.741332] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.741402] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.741481] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.741550] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.741648] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.741720] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.741791] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.741866] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.741937] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.742007] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.742080] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.742152] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.742229] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.742316] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.764505] u32 classifier [ 1.764508] Actions configured [ 1.764598] Initializing XFRM netlink socket [ 1.766522] NET: Registered protocol family 10 [ 1.767656] NET: Registered protocol family 17 [ 1.767669] NET: Registered protocol family 15 [ 1.767844] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.767911] Bluetooth: RFCOMM socket layer initialized [ 1.767922] Bluetooth: RFCOMM ver 1.11 [ 1.767926] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.767931] Bluetooth: HIDP socket layer initialized [ 1.767948] 9pnet: Installing 9P2000 support [ 1.767989] Key type dns_resolver registered [ 1.769418] Registered cp15_barrier emulation handler [ 1.770437] Registered setend emulation handler [ 1.771725] registered taskstats version 1 [ 1.775694] isp 15600000.isp: initialized [ 1.780747] nvcsi 150c0000.nvcsi: initialized [ 1.787162] tegra-vi4 15700000.vi: initialized [ 1.787388] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.787455] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.787517] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.787614] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.788137] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint. [ 1.788140] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint. [ 1.819287] tegra_rtc c2a0000.rtc: setting system clock to 2021-03-05 05:46:10 UTC (1614923170) [ 1.820674] mmcblk mmc0:0001: Card claimed for testing. [ 1.829656] mmc1: Applying tuning correction [ 1.829682] mmc1: Tap value after applying correction 65 [ 1.829689] mmc1: hw tuning done ... [ 1.836516] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.854224] bpmp: mounted debugfs mirror [ 1.856112] bwmgr: missing cdev-type property [ 1.861982] spmic-ldo0: disabling [ 1.862173] spmic-ldo1: disabling [ 1.862346] en-vdd-sd: disabling [ 1.862349] vdd-usb0-5v: disabling [ 1.862351] vdd-usb1-5v: disabling [ 1.862353] vdd-3v3: disabling [ 1.862355] en-vdd-vcm-2v8: disabling [ 1.862357] vdd-sys-bl: disabling [ 1.862360] ALSA device list: [ 1.862364] #0: tegra-hda at 0x3518000 irq 385 [ 1.862366] #1: tegra-snd-t186ref-mobile-rt565x [ 1.967931] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.010584] usb 1-2.2: new low-speed USB device number 3 using tegra-xusb [ 2.035018] usb 1-2.2: New USB device found, idVendor=03f0, idProduct=094a [ 2.035025] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.035029] usb 1-2.2: Product: HP USB Optical Mouse [ 2.035033] usb 1-2.2: Manufacturer: PixArt [ 2.037797] input: PixArt HP USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:094A.0001/input/input3 [ 2.038057] hid-generic 0003:03F0:094A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-3530000.xhci-2.2/input0 [ 2.118590] usb 1-2.4: new high-speed USB device number 4 using tegra-xusb [ 2.151249] usb 1-2.4: New USB device found, idVendor=05e3, idProduct=0610 [ 2.151253] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.151256] usb 1-2.4: Product: USB2.0 Hub [ 2.151259] usb 1-2.4: Manufacturer: GenesysLogic [ 2.152568] hub 1-2.4:1.0: USB hub found [ 2.153884] hub 1-2.4:1.0: 4 ports detected [ 2.154581] tegra_cec 3960000.tegra_cec: physical address: 00:00. [ 2.219123] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.219129] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.372683] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.374705] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.454570] usb 1-2.4.3: new low-speed USB device number 5 using tegra-xusb [ 2.484570] usb 1-2.4.3: New USB device found, idVendor=03f0, idProduct=2a4a [ 2.484575] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.484578] usb 1-2.4.3: Product: HP USB Slim Keyboard - Skylab [ 2.484581] usb 1-2.4.3: Manufacturer: Lite-On Technology Corp [ 2.489996] input: Lite-On Technology Corp HP USB Slim Keyboard - Skylab as /devices/3530000.xhci/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:03F0:2A4A.0002/input/input4 [ 2.546937] hid-generic 0003:03F0:2A4A.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp HP USB Slim Keyboard - Skylab] on usb-3530000.xhci-2.4.3/input0 [ 2.554706] input: Lite-On Technology Corp HP USB Slim Keyboard - Skylab as /devices/3530000.xhci/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.1/0003:03F0:2A4A.0003/input/input5 [ 2.614857] hid-generic 0003:03F0:2A4A.0003: input,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp HP USB Slim Keyboard - Skylab] on usb-3530000.xhci-2.4.3/input1 [ 2.777772] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 3.184326] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 3.580815] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 3.580817] Extcon HDMI: HPD enabled [ 3.580826] tegradc 15210000.nvdisplay: hdmi: plugged [ 3.582394] Freeing unused kernel memory: 8576K [ 3.596634] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 3.598565] tegra-pcie 10003000.pcie-controller: link 1 down, ignoring [ 3.618147] Root device found: mmcblk0p1 [ 3.619940] Found dev node: /dev/mmcblk0p1 [ 3.643105] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.644124] Rootfs mounted over mmcblk0p1 [ 3.672081] Switching from initrd to actual rootfs [ 3.803235] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.803571] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.847598] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.884945] cgroup: cgroup2: unknown option "nsdelegate" [ 3.911196] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.913792] systemd[1]: Detected architecture arm64. [ 3.991047] systemd[1]: Set hostname to . [ 4.094179] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.094200] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.102147] systemd[1]: /lib/systemd/system/systemd-udevd.service:31: Unknown lvalue 'RestrictSUIDSGID' in section 'Service' [ 4.287476] random: systemd: uninitialized urandom read (16 bytes read) [ 4.290734] systemd[1]: Created slice System Slice. [ 4.291347] random: systemd: uninitialized urandom read (16 bytes read) [ 4.291530] systemd[1]: Listening on Journal Audit Socket. [ 4.291593] random: systemd: uninitialized urandom read (16 bytes read) [ 4.291820] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.292059] systemd[1]: Listening on udev Kernel Socket. [ 4.336109] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 4.344659] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.460417] Wake76 for irq=199 [ 4.460422] Wake77 for irq=199 [ 4.460425] Wake78 for irq=199 [ 4.460427] Wake79 for irq=199 [ 4.460429] Wake80 for irq=199 [ 4.460431] Wake81 for irq=199 [ 4.460433] Wake82 for irq=199 [ 4.460461] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 4.460467] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 4.629444] systemd-journald[2382]: Received request to flush runtime journal from PID 1 [ 4.791274] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 4.815857] usb 2-1: New USB device found, idVendor=05e3, idProduct=0616 [ 4.815866] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.815870] usb 2-1: Product: USB3.0 Hub [ 4.815872] usb 2-1: Manufacturer: GenesysLogic [ 4.818464] hub 2-1:1.0: USB hub found [ 4.819478] hub 2-1:1.0: 4 ports detected [ 5.110063] usb 2-1.4: new SuperSpeed USB device number 3 using tegra-xusb [ 5.112345] dhd_module_init in [ 5.112423] found wifi platform device bcmdhd_wlan [ 5.113855] wifi_platform_get_country_code_map: could not get country_code_map [ 5.113859] wifi_plat_dev_drv_probe:platform country code map is not available [ 5.113874] Power-up adapter 'DHD generic adapter' [ 5.113881] wifi_platform_set_power = 1 [ 5.130855] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0616 [ 5.130864] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.130867] usb 2-1.4: Product: USB3.0 Hub [ 5.130871] usb 2-1.4: Manufacturer: GenesysLogic [ 5.133045] hub 2-1.4:1.0: USB hub found [ 5.133494] hub 2-1.4:1.0: 4 ports detected [ 5.171921] random: crng init done [ 5.176456] random: 7 urandom warning(s) missed due to ratelimiting [ 5.262587] usb 2-1.4: usb_suspend_both: status 0 [ 5.310587] usb 2-1: usb_suspend_both: status 0 [ 5.310741] usb usb2: usb_suspend_both: status 0 [ 5.318583] wifi_platform_bus_enumerate device present 1 [ 5.351320] wifi_platform_bus_enumerate device present 0 [ 5.352352] F1 signature read @0x18000000=0x17214354 [ 5.369993] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 5.370767] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 5.370858] wifi_platform_get_mac_addr [ 5.374304] ids dhd_log_netlink_init [ 5.380405] wl_create_event_handler(): thread:wl_event_handler:10d3 started [ 5.380430] wl_event_handler : [ 5.380433] tsk Enter, tsk = 0xffffffc1db981a90 [ 5.382837] dhd_attach(): thread:dhd_watchdog_thread:10d6 started [ 5.386598] dhd_attach(): thread:dhd_dpc:10d7 started [ 5.388067] dhd_attach(): thread:dhd_rxf:10d8 started [ 5.388076] dhd_deferred_work_init: work queue initialized [ 5.392834] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 5.393177] Register interface [wlan0] MAC: 00:04:4b:c4:f5:29 [ 5.393181] dhd_prot_ioctl : bus is down. we have nothing to do [ 5.396605] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ 5.397650] wifi_platform_set_power = 0 [ 6.220727] using random self ethernet address [ 6.220729] using random host ethernet address [ 6.284145] xdma: loading out-of-tree module taints kernel. [ 6.285550] xdma:xdma_mod_init: Xilinx XDMA Reference Driver xdma v2017.1.47 [ 6.285553] xdma:xdma_mod_init: desc_blen_max: 0xfffffff/268435455, sgdma_timeout: 10 sec. [ 6.768313] Mass Storage Function, version: 2009/09/11 [ 6.768318] LUN: removable file: (no medium) [ 6.775293] using random self ethernet address [ 6.775297] using random host ethernet address [ 6.803010] rndis0: HOST MAC 7e:3f:4c:d2:8b:68 [ 6.803181] rndis0: MAC 7e:3f:4c:d2:8b:69 [ 6.803882] usb0: HOST MAC 7e:3f:4c:d2:8b:6a [ 6.804042] usb0: MAC 7e:3f:4c:d2:8b:6b [ 6.804063] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.806295] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.806308] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.806332] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.807500] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.816318] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.817908] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.817933] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.819176] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.826270] l4tbr0: port 1(rndis0) entered blocking state [ 6.826272] l4tbr0: port 1(rndis0) entered disabled state [ 6.826431] device rndis0 entered promiscuous mode [ 6.832383] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.847120] l4tbr0: port 2(usb0) entered blocking state [ 6.847123] l4tbr0: port 2(usb0) entered disabled state [ 6.847519] device usb0 entered promiscuous mode [ 6.858966] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.026426] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.032679] CPU1: shutdown [ 7.032685] psci: CPU1 killed. [ 7.107277] CPU2: shutdown [ 7.111421] gpio tegra-gpio wake18 for gpio=101(M:5) [ 7.113994] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.120267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.120368] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 7.120375] wl_android_wifi_on in [ 7.120379] wifi_platform_set_power = 1 [ 7.130547] psci: Retrying again to check for CPU kill [ 7.130552] psci: CPU2 killed. [ 7.237915] zram: Added device: zram0 [ 7.238272] zram: Added device: zram1 [ 7.238634] zram: Added device: zram2 [ 7.238958] zram: Added device: zram3 [ 7.256609] zram0: detected capacity change from 0 to 1030217728 [ 7.280141] Adding 1006068k swap on /dev/zram0. Priority:5 extents:1 across:1006068k SS [ 7.283450] zram1: detected capacity change from 0 to 1030217728 [ 7.293453] Adding 1006068k swap on /dev/zram1. Priority:5 extents:1 across:1006068k SS [ 7.296870] zram2: detected capacity change from 0 to 1030217728 [ 7.306314] Adding 1006068k swap on /dev/zram2. Priority:5 extents:1 across:1006068k SS [ 7.309632] zram3: detected capacity change from 0 to 1030217728 [ 7.318305] Adding 1006068k swap on /dev/zram3. Priority:5 extents:1 across:1006068k SS [ 7.330552] vdd-1v8: voltage operation not allowed [ 7.330564] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.350936] vdd-1v8: voltage operation not allowed [ 7.350947] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.375582] vdd-1v8: voltage operation not allowed [ 7.375592] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.377996] vdd-1v8: voltage operation not allowed [ 7.378004] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.477492] vdd-1v8: voltage operation not allowed [ 7.477503] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.480007] vdd-1v8: voltage operation not allowed [ 7.480018] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.481599] vdd-1v8: voltage operation not allowed [ 7.481606] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.481629] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ 7.482221] F1 signature read @0x18000000=0x17214354 [ 7.487028] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 7.487689] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 7.560975] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 7.623048] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 7.623385] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 7.623466] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 7.623468] Enabling wake69 [ 7.624402] wifi_platform_get_mac_addr [ 7.626715] Firmware up: op_mode=0x0005, MAC=00:04:4b:c4:f5:29 [ 7.631619] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 7.631664] Skipping the clm download. len:0 memblk: (null) [ 7.634114] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 7.639475] Firmware version = wl0: May 17 2019 16:59:40 version 7.35.349.79 (r714996 CY) FWID 01-e527e2ad [ 7.642054] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 7.714590] wl_android_wifi_off in [ 7.715742] dhd_wlfc_deinit():3472, maintain HOST RXRERODER flag in tvl [ 7.716256] dhdsdio_isr : bus is down. we have nothing to do [ 7.716294] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 7.716297] Disabling wake69 [ 7.716400] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ 7.717443] wifi_platform_set_power = 0 [ 8.171045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.190362] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.190475] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 8.190484] wl_android_wifi_on in [ 8.190487] wifi_platform_set_power = 1 [ 8.401550] vdd-1v8: voltage operation not allowed [ 8.401560] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.422800] vdd-1v8: voltage operation not allowed [ 8.422818] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.443605] vdd-1v8: voltage operation not allowed [ 8.443618] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.446029] vdd-1v8: voltage operation not allowed [ 8.446037] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.551310] vdd-1v8: voltage operation not allowed [ 8.551324] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.553288] vdd-1v8: voltage operation not allowed [ 8.553298] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.556388] vdd-1v8: voltage operation not allowed [ 8.556397] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 8.556421] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 65 [ 8.557098] F1 signature read @0x18000000=0x17214354 [ 8.562316] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 8.563079] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 8.629156] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 8.691136] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 8.691389] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.691409] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 8.691410] Enabling wake69 [ 8.692160] wifi_platform_get_mac_addr [ 8.694138] Firmware up: op_mode=0x0005, MAC=00:04:4b:c4:f5:29 [ 8.698323] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 8.698341] Skipping the clm download. len:0 memblk: (null) [ 8.700525] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 8.705412] Firmware version = wl0: May 17 2019 16:59:40 version 7.35.349.79 (r714996 CY) FWID 01-e527e2ad [ 8.707860] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 8.805938] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 8.805938] P2P interface registered [ 8.813686] WLC_E_IF: NO_IF set, event Ignored [ 8.821030] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.254715] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 10.255305] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.987148] tegradc 15210000.nvdisplay: blank - powerdown [ 11.042455] extcon-disp-state external-connection:disp-state: cable 47 state 0 already set. [ 11.042462] Extcon AUX1(HDMI) disable [ 11.067409] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 11.067498] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 11.068215] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 11.068354] tegradc 15210000.nvdisplay: unblank [ 11.073672] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 11.073768] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 11.073852] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 11.075225] Parent Clock set for DC plld2 [ 11.078004] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 11.100460] tegradc 15210000.nvdisplay: unblank [ 11.100471] tegradc 15220000.nvdisplay: blank - powerdown [ 12.260710] fuse init (API version 7.26) [ 12.974595] usb 1-1: new high-speed USB device number 6 using tegra-xusb [ 12.995748] usb 1-1: New USB device found, idVendor=2bdf, idProduct=0001 [ 12.995754] usb 1-1: New USB device strings: Mfr=5, Product=3, SerialNumber=6 [ 12.995757] usb 1-1: Product: MV-CA023-10UC [ 12.995759] usb 1-1: Manufacturer: Hikrobot [ 12.995761] usb 1-1: SerialNumber: 00F25341712