[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-5285-d7000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Feb 19 08:42:04 PST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2001384 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 console=ttyTCU0,115200n8 console=tty0,115200n8 root=/dev/ram0 rw init=/bin/bash ramdisk_size=65535 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29100(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7190816K/8132608K available (15294K kernel code, 2942K rwdata, 6664K rodata, 8576K init, 609K bss, 188128K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a13f808 - 0xffffff800a1d7cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008338] Console: colour dummy device 80x25 [ 0.012454] console [tty0] enabled [ 0.015580] bootconsole [tegra_comb_uart0] disabled [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-5285-d7000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Feb 19 08:42:04 PST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2001384 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 console=ttyTCU0,115200n8 console=tty0,115200n8 root=/dev/ram0 rw init=/bin/bash ramdisk_size=65535 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29100(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7190816K/8132608K available (15294K kernel code, 2942K rwdata, 6664K rodata, 8576K init, 609K bss, 188128K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a13f808 - 0xffffff800a1d7cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008338] Console: colour dummy device 80x25 [ 0.012454] console [tty0] enabled [ 0.015580] bootconsole [tegra_comb_uart0] disabled [ 0.020590] kmemleak: Kernel memory leak detector disabled [ 0.020650] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.020699] pid_max: default: 32768 minimum: 301 [ 0.021801] Security Framework initialized [ 0.022362] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022411] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023937] ftrace: allocating 47208 entries in 185 pages [ 0.423398] sched-energy: Sched-energy-costs installed from DT [ 0.423479] ASID allocator initialised with 65536 entries [ 0.457785] tegra-id: chipid=21917. [ 0.457807] tegra-id: opt_subrevision=1. [ 0.457843] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.457891] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.457949] DTB Build time: Feb 19 2021 08:44:25 [ 0.505981] CPU1: Booted secondary processor [4e0f0040] [ 0.538027] CPU2: Booted secondary processor [4e0f0040] [ 0.570136] CPU3: Booted secondary processor [4e0f0040] [ 0.602417] CPU4: Booted secondary processor [4e0f0040] [ 0.634487] CPU5: Booted secondary processor [4e0f0040] [ 0.634713] Brought up 6 CPUs [ 0.634853] SMP: Total of 6 processors activated. [ 0.634880] CPU features: detected feature: Privileged Access Never [ 0.634925] CPU features: detected feature: LSE atomic instructions [ 0.634962] CPU features: detected feature: User Access Override [ 0.634986] CPU features: detected feature: 32-bit EL0 Support [ 0.636467] CPU: All CPU(s) started at EL2 [ 0.636542] alternatives: patching kernel code [ 0.642946] devtmpfs: initialized [ 0.680379] Initilizing CustomIPI irq domain [ 0.680657] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.680720] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.703761] pinctrl core: initialized pinctrl subsystem [ 0.704040] OS set in device tree is not L4T. [ 0.704395] regulator-dummy: no parameters [ 0.704670] Initializing plugin-manager [ 0.704742] Plugin module not found [ 0.704818] Plugin-manager status disabled [ 0.706134] NET: Registered protocol family 16 [ 0.707444] pstore: using zlib compression [ 0.708333] console [pstore-1] enabled [ 0.708359] pstore: Registered ramoops as persistent store backend [ 0.708388] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.725712] cpuidle: using governor menu [ 0.726766] bpmp: waiting for handshake [ 0.726800] bpmp: handshake completed [ 0.726838] bpmp: synchronizing channels [ 0.726888] bpmp: channels synchronized [ 0.726917] bpmp: mail init ok [ 0.729565] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.729800] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.729833] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.729859] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.729885] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.729911] t19x-arm-smmu 12000000.iommu: nested translation [ 0.729940] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.729976] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.730039] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.730069] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.730117] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.733946] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.734008] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.736590] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.737451] tegra_aon_clk_init: ok [ 0.737489] Registering BPMP clocks... [ 0.737614] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.738229] Serial: AMBA PL011 UART driver [ 0.738409] tegra_powergate_init: DONE [ 0.738552] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.738643] DTB Build time: Feb 19 2021 08:44:25 [ 0.741532] Tegra reboot handler registered. [ 0.749565] iommu: Adding device 14160000.pcie to group 0 [ 0.750296] iommu: Adding device 141a0000.pcie to group 1 [ 0.751827] iommu: Adding device 2490000.ether_qos to group 2 [ 0.752378] iommu: Adding device 3100000.serial to group 3 [ 0.752938] iommu: Adding device 3110000.serial to group 4 [ 0.753445] iommu: Adding device 3140000.serial to group 5 [ 0.754128] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.754329] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.754392] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.754446] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.754485] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.754562] tegra-pmc: PMC Prod config success [ 0.754796] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.754893] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.755330] iommu: Adding device 3400000.sdhci to group 6 [ 0.755853] iommu: Adding device 3210000.spi to group 7 [ 0.756335] iommu: Adding device 3230000.spi to group 8 [ 0.756832] iommu: Adding device 3270000.spi to group 9 [ 0.758028] iommu: Adding device 3160000.i2c to group 10 [ 0.758506] iommu: Adding device c240000.i2c to group 11 [ 0.758955] iommu: Adding device 3180000.i2c to group 12 [ 0.759376] iommu: Adding device 3190000.i2c to group 13 [ 0.759994] iommu: Adding device 31b0000.i2c to group 14 [ 0.760425] iommu: Adding device 31c0000.i2c to group 15 [ 0.760839] iommu: Adding device c250000.i2c to group 16 [ 0.761276] iommu: Adding device 31e0000.i2c to group 17 [ 0.761877] iommu: Adding device sound to group 18 [ 0.762498] iommu: Adding device 3510000.hda to group 19 [ 0.763050] iommu: Adding device bc00000.rtcpu to group 20 [ 0.764857] iommu: Adding device 13e10000.host1x to group 21 [ 0.765533] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.765933] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.766428] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.766869] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.767475] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.768117] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.768510] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.768949] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.769491] iommu: Adding device 15340000.vic to group 30 [ 0.769982] iommu: Adding device 15380000.nvjpg to group 31 [ 0.770353] iommu: Adding device 15500000.tsec to group 32 [ 0.770822] iommu: Adding device 15100000.tsecb to group 33 [ 0.771258] iommu: Adding device 15480000.nvdec to group 34 [ 0.771724] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.772094] iommu: Adding device 154c0000.nvenc to group 36 [ 0.772490] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.772939] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.773390] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.774010] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.778199] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.778322] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.778909] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.778993] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.780740] iommu: Adding device 15c10000.vi to group 42 [ 0.780938] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.781389] iommu: Adding device 14800000.isp to group 43 [ 0.782389] iommu: Adding device 16000000.pva0 to group 44 [ 0.782980] iommu: Adding device 16800000.pva1 to group 45 [ 0.783386] iommu: Adding device 15810000.se to group 46 [ 0.783795] iommu: Adding device 15820000.se to group 47 [ 0.784091] iommu: Adding device 15830000.se to group 48 [ 0.784403] iommu: Adding device 15840000.se to group 49 [ 0.784739] iommu: Adding device c1a0000.aon to group 50 [ 0.786331] iommu: Adding device d000000.bpmp to group 51 [ 0.786685] bpmp: ping status is 0 [ 0.786851] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.790007] bpmp d000000.bpmp: probe ok [ 0.791870] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.792404] iommu: Adding device smmu_test to group 52 [ 0.793555] mc: mapped MMIO address: 0xffffff800a590000 -> 0x2c10000 [ 0.793621] mc: mapped MMIO address: 0xffffff800a5b0000 -> 0x2c20000 [ 0.793680] mc: mapped MMIO address: 0xffffff800a5d0000 -> 0x2c30000 [ 0.793737] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.793801] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.793860] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2b80000 [ 0.793916] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b90000 [ 0.793971] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2ba0000 [ 0.794030] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2bb0000 [ 0.794089] mc: mapped MMIO address: 0xffffff800b090000 -> 0x1700000 [ 0.794145] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1710000 [ 0.794200] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1720000 [ 0.794282] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1730000 [ 0.794340] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1740000 [ 0.794416] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1750000 [ 0.794471] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1760000 [ 0.794529] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1770000 [ 0.794656] mc-err: mcerr ops are set to t19x [ 0.800547] iommu: Adding device 2600000.dma to group 53 [ 0.806046] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.807337] GPIO line 339 (wifi-enable) hogged as output/high [ 0.807414] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.807492] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.807927] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.817336] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.817499] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.817577] GPIO line 266 (w-disable1) hogged as output/high [ 0.817650] GPIO line 264 (w-disable2) hogged as output/high [ 0.817719] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.818078] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.820878] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.820924] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.820991] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.821951] iommu: Adding device 3550000.xudc to group 54 [ 0.822737] iommu: Adding device 3610000.xhci to group 55 [ 0.825033] arm64_ras arm64_ras: probed [ 0.825623] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.825694] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.825822] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.825928] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.826049] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.826149] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.826395] carmel_ras_enable: RAS enabled on cpu0 [ 0.826618] carmel_ras_enable: RAS enabled on cpu1 [ 0.826838] carmel_ras_enable: RAS enabled on cpu2 [ 0.827059] carmel_ras_enable: RAS enabled on cpu3 [ 0.827280] carmel_ras_enable: RAS enabled on cpu4 [ 0.827496] carmel_ras_enable: RAS enabled on cpu5 [ 0.827599] carmel_ras carmel_ras: probed [ 0.828760] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.829405] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.830259] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.831219] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.832091] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.832592] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.834057] vdd-ac-bat: 5000 mV [ 0.834573] vdd-sdmmc1-sw: 3300 mV [ 0.834992] vdd-1v8-sd: 1800 mV [ 0.835354] vdd-3v3-cvb: 3300 mV [ 0.835732] vdd-1v8-cvb: 1800 mV [ 0.836183] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.836251] vdd-epb-1v0: 1000 mV [ 0.836757] avdd-cam-2v8: 2800 mV [ 0.837140] vdd-fan: 5000 mV [ 0.837540] vdd-hdmi-5v0: 5000 mV [ 0.837961] vdd_sys_en: 1200 mV [ 0.867602] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.872054] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.872405] SCSI subsystem initialized [ 0.872955] usbcore: registered new interface driver usbfs [ 0.873068] usbcore: registered new interface driver hub [ 0.873200] usbcore: registered new device driver usb [ 0.885091] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.887948] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.898631] vdd-1v0: at 1000 mV [ 0.906705] vdd-1v8-hs: at 1800 mV [ 0.914740] vdd-1v8-ls: at 1800 mV [ 0.922745] vdd-1v8-ao: at 1800 mV [ 0.930793] vddio-ddr-1v1: at 1100 mV [ 0.938588] vdd-rtc: at 800 mV [ 0.940000] spmic-ldo1: at 2375 mV [ 0.950630] vdd-ao-3v3: at 3300 mV [ 0.962689] vddio-emmc-3v3: at 3300 mV [ 0.964034] spmic-ldo4: at 1587 mV [ 0.974732] vdd-usb-3v3: at 3300 mV [ 0.986791] vddio-sdmmc1-3v3: at 3300 mV [ 0.994801] vdd-csi-1v2: at 1200 mV [ 0.996439] spmic-ldo8: at 1800 mV [ 1.001514] GPIO line 246 (gpio_default) hogged as output/high [ 1.002971] GPIO line 247 (gpio_default) hogged as output/high [ 1.003404] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 1.003895] max77620 4-003c: max77620 probe successful [ 1.004627] media: Linux media interface: v0.10 [ 1.004760] Linux video capture interface: v2.00 [ 1.006378] pps_core: LinuxPPS API ver. 1 registered [ 1.006415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.006489] PTP clock support registered [ 1.006785] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.007118] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.007204] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.009794] trusty trusty: trusty version: Built: 08:40:57 Feb 19 2021 [ 1.009907] trusty trusty: selected api version: 3 (requested 3) [ 1.010952] Advanced Linux Sound Architecture Driver Initialized. [ 1.011632] Bluetooth: Core ver 2.22 [ 1.011704] NET: Registered protocol family 31 [ 1.011735] Bluetooth: HCI device and connection manager initialized [ 1.011783] Bluetooth: HCI socket layer initialized [ 1.011822] Bluetooth: L2CAP socket layer initialized [ 1.011874] Bluetooth: SCO socket layer initialized [ 1.014535] camchar: rtcpu character device driver loaded [ 1.015042] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 1.015187] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 1.016169] clocksource: Switched to clocksource arch_sys_counter [ 1.058847] VFS: Disk quotas dquot_6.6.0 [ 1.058975] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.059406] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.060758] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.060856] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.061131] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.061199] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.061249] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.061293] nvmap_page_pool_init: Total RAM pages: 1986120 [ 1.061327] nvmap_page_pool_init: nvmap page pool size: 248265 pages (969 MB) [ 1.061647] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.062099] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.064145] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.078192] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.078527] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.078847] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.079107] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.079376] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.080658] la/ptsa driver initialized. [ 1.080987] NET: Registered protocol family 2 [ 1.081791] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.082178] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.082811] TCP: Hash tables configured (established 65536 bind 65536) [ 1.082896] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.083043] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.083557] NET: Registered protocol family 1 [ 1.084263] RPC: Registered named UNIX socket transport module. [ 1.084315] RPC: Registered udp transport module. [ 1.084348] RPC: Registered tcp transport module. [ 1.084379] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.084756] Trying to unpack rootfs image as initramfs... [ 1.315799] Freeing initrd memory: 7064K [ 1.337042] random: fast init done [ 1.341651] host1x 13e10000.host1x: initialized [ 1.343465] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.348356] audit: initializing netlink subsys (disabled) [ 1.348446] audit: type=2000 audit(0.960:1): initialized [ 1.349311] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.360439] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.361854] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.362602] 9p: Installing v9fs 9p2000 file system support [ 1.368248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.368498] io scheduler noop registered [ 1.368834] io scheduler cfq registered (default) [ 1.372657] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.407626] iommu: Adding device 2993000.adsp to group 56 [ 1.515139] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.516145] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.530416] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.530954] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.531725] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.532243] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.532735] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.536073] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.536432] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.539438] tsec 15500000.tsec: initialized [ 1.541380] tsec 15100000.tsecb: initialized [ 1.545106] nvdec 15480000.nvdec: initialized [ 1.547754] nvdec 15140000.nvdec1: initialized [ 1.553748] falcon 15340000.vic: initialized [ 1.555776] falcon 15380000.nvjpg: initialized [ 1.557734] falcon 154c0000.nvenc: initialized [ 1.559789] falcon 15a80000.nvenc1: initialized [ 1.563518] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.565283] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.566931] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.568670] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.570360] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.572021] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.574115] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.575788] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.579755] t194-nvcsi 15a00000.nvcsi: initialized [ 1.585516] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.586027] scare-pigeon 14b00000.isp-thi: initialized [ 1.591456] pva 16000000.pva0: initialized [ 1.597185] pva 16800000.pva1: initialized [ 1.602101] nvdla 15880000.nvdla0: initialized [ 1.606585] nvdla 158c0000.nvdla1: initialized [ 1.607973] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.608023] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.608094] tegradccommon 15200000.dc_common: dma mapping done [ 1.608324] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.608376] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.608654] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.608711] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.608981] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.609019] tegra_cec 3960000.tegra_cec: probed [ 1.609976] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.610079] generic_infoframe_type: 0x87 [ 1.610227] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.610302] tegradc 15200000.nvdisplay: Display dc.ffffff800bd10000 registered with id=0 [ 1.615722] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s [ 1.615773] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz [ 1.615819] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.616117] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.616196] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.619809] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.619860] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.622108] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.622963] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.623014] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.623406] kfuse 3830000.kfuse: initialized [ 1.624292] tegradc 15200000.nvdisplay: probed [ 1.625244] Console: switching to colour frame buffer device 80x30 [ 1.625313] tegradc 15200000.nvdisplay: fb registered [ 1.625643] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.626186] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.626256] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.626424] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.626501] tegradc 15210000.nvdisplay: Display dc.ffffff800be90000 registered with id=1 [ 1.626753] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.626796] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.630187] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.632928] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.634590] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.635883] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.637062] tegradc 15210000.nvdisplay: probed [ 2.624223] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.624229] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 4.200926] console [ttyTCU0] enabled [ 4.201224] [drm] Initialized [ 4.207469] tegradc 15210000.nvdisplay: fb registered [ 4.216579] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 4.219870] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 4.227681] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 4.232941] tegradc 15210000.nvdisplay: blank - powerdown [ 4.235442] brd: module loaded [ 4.241740] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 4.250094] Extcon DP: HPD disabled [ 4.253669] hpd: hpd_switch 0 [ 4.253930] loop: module loaded [ 4.254000] tegra_profiler: version: 1.143, samples/io: 48/28 [ 4.256328] tegra_profiler: auth: init [ 4.256933] THERMAL EST: found 3 subdevs [ 4.256938] THERMAL EST num_resources: 0 [ 4.256944] [THERMAL EST subdev 0] [ 4.256949] [THERMAL EST subdev 1] [ 4.256953] [THERMAL EST subdev 2] [ 4.256962] THERMAL EST: Found 2 profiles, default profile is quiet [ 4.257383] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 4.257387] THERMAL EST: thz register success. [ 4.257587] THERMAL EST: end of probe, return err: 0 [ 4.258184] sd: No Scsi addr parsed to reserve index [ 4.258208] hisi_sas: driver version v1.6 [ 4.268523] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 4.268528] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 4.268535] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 4.268750] 1 ofpart partitions found on MTD device spi6.0 [ 4.268753] Creating 1 MTD partitions on "spi6.0": [ 4.268760] 0x000000000000-0x000002000000 : "Whole_flash0" [ 4.274315] libphy: Fixed MDIO Bus: probed [ 4.275101] tun: Universal TUN/TAP device driver, 1.6 [ 4.275127] tun: (C) 1999-2004 Max Krasnyansky [ 4.275849] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.275852] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.275898] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 4.275926] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.275974] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 4.275977] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 4.276021] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 4.276024] Copyright(c) 1999 - 2017 Intel Corporation. [ 4.425247] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 4.431744] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 4.437850] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 4.519376] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 4.520113] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 15 f9 b9 [ 4.520471] libphy: dwc_phy: probed [ 4.523240] PPP generic driver version 2.4.2 [ 4.523607] PPP BSD Compression module registered [ 4.523729] PPP Deflate Compression module registered [ 4.523868] PPP MPPE Compression module registered [ 4.523989] NET: Registered protocol family 24 [ 4.524204] usbcore: registered new interface driver r8152 [ 4.524393] usbcore: registered new interface driver asix [ 4.524574] usbcore: registered new interface driver ax88179_178a [ 4.524764] usbcore: registered new interface driver cdc_ether [ 4.524950] usbcore: registered new interface driver net1080 [ 4.525133] usbcore: registered new interface driver cdc_subset [ 4.525323] usbcore: registered new interface driver zaurus [ 4.525921] usbcore: registered new interface driver cdc_ncm [ 4.531965] VFIO - User Level meta-driver version: 0.3 [ 4.538230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.543237] ehci-pci: EHCI PCI platform driver [ 4.547552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.553850] ohci-pci: OHCI PCI platform driver [ 4.558304] ohci-platform: OHCI generic platform driver [ 4.567914] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 4.571005] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f53fc000 id [ 4.575721] usbcore: registered new interface driver uas [ 4.580609] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release [ 4.580637] tegra-xusb 3610000.xhci: xHCI Host Controller [ 4.580657] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 4.581364] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 4.581406] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 4.581687] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.581693] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.581698] usb usb1: Product: xHCI Host Controller [ 4.581703] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 4.581707] usb usb1: SerialNumber: 3610000.xhci [ 4.590215] hub 1-0:1.0: USB hub found [ 4.590261] hub 1-0:1.0: 4 ports detected [ 4.590733] tegra-xusb 3610000.xhci: xHCI Host Controller [ 4.590770] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 4.590778] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 4.591073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.591079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.591106] usb usb2: Product: xHCI Host Controller [ 4.591111] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 4.591116] usb usb2: SerialNumber: 3610000.xhci [ 4.595769] hub 2-0:1.0: USB hub found [ 4.595811] hub 2-0:1.0: 4 ports detected [ 4.631773] Wake76 for irq=199 [ 4.631777] Wake77 for irq=199 [ 4.631780] Wake78 for irq=199 [ 4.631783] Wake79 for irq=199 [ 4.631785] Wake80 for irq=199 [ 4.631788] Wake81 for irq=199 [ 4.631790] Wake82 for irq=199 [ 4.631828] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 4.631834] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 4.713348] usb usb2: usb_suspend_both: status 0 [ 4.750883] usbcore: registered new interface driver usb-storage [ 4.756816] usbcore: registered new interface driver usbserial [ 4.765527] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 4.769049] tegra-xudc-new 3550000.xudc: device count: 1 [ 4.774942] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 4.779311] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 4.784740] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 4.789787] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 4.797076] mousedev: PS/2 mouse device common for all mice [ 4.801858] usbcore: registered new interface driver xpad [ 4.928202] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.929068] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 4.930917] Wake73 for irq=42 [ 4.932328] rtc rtc1: alarm rtc device [ 4.932440] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 4.932596] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.932969] i2c /dev entries driver [ 4.935517] i2c i2c-2: Added multiplexed i2c bus 9 [ 4.936115] i2c i2c-2: Added multiplexed i2c bus 10 [ 4.936272] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 4.937010] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.960731] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 4.960931] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.961296] imx219 9-0010: board setup failed [ 4.961508] imx219: probe of 9-0010 failed with error -121 [ 4.962087] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 4.968812] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489 [ 4.968962] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.969131] usb 1-2: Product: 4-Port USB 2.0 Hub [ 4.969226] usb 1-2: Manufacturer: Generic [ 4.970841] hub 1-2:1.0: USB hub found [ 4.972001] hub 1-2:1.0: 4 ports detected [ 4.985478] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 4.985716] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 4.985996] imx219 10-0010: board setup failed [ 4.986197] imx219: probe of 10-0010 failed with error -121 [ 4.987480] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 4.994479] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 4.995773] FAN dev name: pwm-fan [ 4.999166] FAN:gpio request success. [ 5.002486] FAN: can't find tach_gpio [ 5.006422] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 5.013513] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 5.019384] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 5.025647] pwm_fan_driver pwm-fan: tach period: 1000 [ 5.031265] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 5.038506] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 5.046374] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 5.053818] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 5.061513] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 5.069217] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 5.077144] usb 2-3: new SuperSpeedPlus USB device number 2 using tegra-xusb [ 5.084349] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 5.091963] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 5.099402] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 5.107535] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 5.114029] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489 [ 5.114036] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.114042] usb 2-3: Product: 4-Port USB 3.0 Hub [ 5.114046] usb 2-3: Manufacturer: Generic [ 5.124468] hub 2-3:1.0: USB hub found [ 5.126237] hub 2-3:1.0: 4 ports detected [ 5.147997] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 5.154873] device-mapper: uevent: version 1.0.3 [ 5.159458] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 5.171387] tegra194_cpufreq_probe: platform driver Initialization: pass [ 5.175479] cpuidle: Initializing cpuidle driver [ 5.179996] sdhci: Secure Digital Host Controller Interface driver [ 5.185186] sdhci: Copyright(c) Pierre Ossman [ 5.189347] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.195384] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 5.201053] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 5.209177] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 246 [ 5.218040] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 5.221094] tegra-se-nvhost 15810000.se: initialized [ 5.226076] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.231599] tegra-se-nvhost 15820000.se: initialized [ 5.236999] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.242369] tegra-se-nvhost 15830000.se: initialized [ 5.247283] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.253426] tegra-se-nvhost 15840000.se: initialized [ 5.259019] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.264030] gpio tegra-gpio wake8 for gpio=55(G:7) [ 5.268370] hidraw: raw HID events driver (C) Jiri Kosina [ 5.269741] usbcore: registered new interface driver usbhid [ 5.269744] usbhid: USB HID core driver [ 5.283788] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 5.296457] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 5.302018] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 5.306929] tegra186-aondbg aondbg: aondbg driver probe() OK [ 5.312911] denver_knobs_init:MTS_VERSION:51035886 [ 5.317279] tegra19x_actmon d230000.actmon: in actmon_register()... [ 5.324098] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.332176] t19x_cache tegra-cache: probed [ 5.338637] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 5.343264] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 5.351553] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 5.356782] PLL_AON clock registered [ 5.361697] Clocks initialized successfully [ 5.366248] nvpmodel: initialized successfully [ 5.369568] trusty-virtio trusty:virtio: initializing [ 5.374101] trusty_ipc virtio0: vring0: va(pa) ffffffc1f274a000(0) qsz 32 notifyid 1 [ 5.381693] trusty_ipc virtio0: vring1: va(pa) ffffffc1f274c000(0) qsz 32 notifyid 2 [ 5.389553] trusty-virtio trusty:virtio: initializing done [ 5.389710] trusty_ipc virtio0: is online [ 5.399942] tegra-hda 3510000.hda: Override SDO lines to 4 [ 5.404455] usbcore: registered new interface driver snd-usb-audio [ 5.421639] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 5.422196] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 5.427535] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 5.434693] OPE platform probe [ 5.434798] OPE platform probe successful [ 5.442809] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 5.505831] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 5.506132] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 5.506397] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 5.506628] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 5.506858] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 5.507091] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 5.507311] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 5.507532] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 5.507726] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 5.507941] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 5.508413] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 5.513983] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 5.519888] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 5.526303] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 5.531996] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 5.537958] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 5.544012] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 5.549989] usb 1-2: usb_suspend_both: status 0 [ 5.550114] usb usb1: usb_suspend_both: status 0 [ 5.559803] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 5.565553] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 5.571874] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 5.605752] mmc0: host does not support reading read-only switch, assuming write-enable [ 5.609805] u32 classifier [ 5.609884] Actions configured [ 5.610039] Initializing XFRM netlink socket [ 5.610786] NET: Registered protocol family 10 [ 5.611693] NET: Registered protocol family 17 [ 5.611811] NET: Registered protocol family 15 [ 5.611955] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.622450] Bluetooth: RFCOMM socket layer initialized [ 5.627503] Bluetooth: RFCOMM ver 1.11 [ 5.631417] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.637362] Bluetooth: HIDP socket layer initialized [ 5.642267] 9pnet: Installing 9P2000 support [ 5.646665] Key type dns_resolver registered [ 5.651786] Registered cp15_barrier emulation handler [ 5.657061] Registered setend emulation handler [ 5.662760] registered taskstats version 1 [ 5.665608] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 5.676856] OF: PCI: host bridge /pcie@14160000 ranges: [ 5.677000] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 5.682962] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 5.689171] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 5.728192] usb 2-3: usb_suspend_both: status 0 [ 5.731781] usb usb2: usb_suspend_both: status 0 [ 5.749882] mmc0: hw tuning done ... [ 5.750005] mmc0: new ultra high speed SDR104 SDHC card at address aaaa [ 5.750649] mmcblk0: mmc0:aaaa SA16G 14.8 GiB [ 5.757259] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 5.808212] tegra-pcie-dw 14160000.pcie: link is up [ 5.808523] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 5.808645] pci_bus 0004:00: root bus resource [bus 00-ff] [ 5.808743] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 5.808907] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 5.809084] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 5.809638] iommu: Adding device 0004:00:00.0 to group 58 [ 5.810121] pci 0004:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 5.811526] iommu: Adding device 0004:01:00.0 to group 59 [ 5.821207] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 5.821356] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 5.821490] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 5.821729] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 5.821880] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 5.821996] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 5.826141] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 5.833289] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 5.841726] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 5.850912] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 5.857620] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 5.864891] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 5.871921] OF: PCI: host bridge /pcie@141a0000 ranges: [ 5.875647] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 5.881739] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 5.888035] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 5.936227] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 5.957431] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549 [ 5.957581] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.957745] usb 1-3: Product: Bluetooth Radio [ 5.957823] usb 1-3: Manufacturer: Realtek [ 5.957896] usb 1-3: SerialNumber: 00e04c000001 [ 6.407653] tegra-pcie-dw 141a0000.pcie: link is down [ 6.407980] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 6.408107] pci_bus 0005:00: root bus resource [bus 00-ff] [ 6.408276] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 6.408448] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 6.408634] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 6.409197] iommu: Adding device 0005:00:00.0 to group 60 [ 6.409647] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 6.409761] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.410159] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 6.410865] iommu: Removing device 0005:00:00.0 from group 60 [ 6.412502] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 6.423257] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 6.428451] tegra194-isp5 14800000.isp: initialized [ 6.435430] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 6.438648] tegra194-vi5 15c10000.vi: initialized [ 6.443166] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 6.443360] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 6.443680] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 6.450469] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 6.454419] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 6.463257] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 6.472037] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 6.480127] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 6.488569] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 6.501462] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 6.505321] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 6.514463] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 6.524204] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 6.531999] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 6.541584] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 6.552038] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 6.560333] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 6.568806] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 6.578519] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 6.586633] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ��WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 ��[ 6.677491] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 6.678016] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.678404] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 6.678848] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 6.679477] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 6.679796] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 6.680278] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 6.680398] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.681693] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda [ 6.690792] Wake83 for irq=211 [ 6.693828] gpio tegra-gpio wake67 for gpio=48(G:0) [ 6.698440] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 6.704346] input: gpio-keys as /devices/gpio-keys/input/input4 [ 6.733465] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 6.734085] mmcblk mmc0:aaaa: Card claimed for testing. [ 6.769807] bpmp: mounted debugfs mirror [ 6.776018] ALSA device list: [ 6.776086] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 6.776192] #1: jetson-xaviernx-ape [ 6.778141] Freeing unused kernel memory: 8576K [ 6.819434] Root device found: [ 6.821316] No root-device: Mount failed