[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@avermedia.com) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #2 SMP PREEMPT Mon Nov 21 12:51:54 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 380000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem2: 00800000@a06b2000 [ 0.000000] Found lut_mem2: 00002008@a06af000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 4128253 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 57344 pages used for memmap [ 0.000000] Normal zone: 3670016 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4063749 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem2=0x800000@0xa06b2000 lut_mem2=0x2008@0xa06af000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet pci=noaer root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29960(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 15427260K/16513012K available (15486K kernel code, 2990K rwdata, 6836K rodata, 8704K init, 623K bss, 332088K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008fa0000 ( 15488 KB) [ 0.000000] .rodata : 0xffffff8008fa0000 - 0xffffff8009660000 ( 6912 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ee0000 ( 8704 KB) [ 0.000000] .data : 0xffffff8009ee0000 - 0xffffff800a1cb808 ( 2991 KB) [ 0.000000] .bss : 0xffffff800a1cb808 - 0xffffff800a267734 ( 624 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf10000000 ( 256 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc400000000 ( 16384 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000883] Console: colour dummy device 80x25 [ 0.000894] console [tty0] enabled [ 0.000901] bootconsole [tegra_comb_uart0] disabled [ 0.000915] kmemleak: Kernel memory leak detector disabled [ 0.000933] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000948] pid_max: default: 32768 minimum: 301 [ 0.002037] Security Framework initialized [ 0.002609] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.002619] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004347] ftrace: allocating 47437 entries in 186 pages [ 0.401339] sched-energy: Sched-energy-costs installed from DT [ 0.401359] ASID allocator initialised with 65536 entries [ 0.437237] tegra-id: chipid=21917. [ 0.437249] tegra-id: opt_subrevision=1. [ 0.437276] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.437289] DTS File Name: /home/hungyu/workspace/NVIDIA/NX215B/Jetson_build_script/NX215B_output/bin/L4T/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/avt-p3668-0001-p2150-0000-nx215b.dtsi [ 0.437300] DTB Build time: Nov 21 2022 12:37:43 [ 0.485081] CPU1: Booted secondary processor [4e0f0040] [ 0.517260] CPU2: Booted secondary processor [4e0f0040] [ 0.549328] CPU3: Booted secondary processor [4e0f0040] [ 0.581621] CPU4: Booted secondary processor [4e0f0040] [ 0.613726] CPU5: Booted secondary processor [4e0f0040] [ 0.613934] Brought up 6 CPUs [ 0.613944] SMP: Total of 6 processors activated. [ 0.613953] CPU features: detected feature: Privileged Access Never [ 0.613960] CPU features: detected feature: LSE atomic instructions [ 0.613966] CPU features: detected feature: User Access Override [ 0.613972] CPU features: detected feature: 32-bit EL0 Support [ 0.615434] CPU: All CPU(s) started at EL2 [ 0.615481] alternatives: patching kernel code [ 0.622643] devtmpfs: initialized [ 0.663940] Initilizing CustomIPI irq domain [ 0.664171] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.664193] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.676398] pinctrl core: initialized pinctrl subsystem [ 0.676610] OS set in device tree is not L4T. [ 0.676919] regulator-dummy: no parameters [ 0.677240] Initializing plugin-manager [ 0.677300] Plugin module not found [ 0.677340] Plugin-manager status disabled [ 0.678807] NET: Registered protocol family 16 [ 0.680241] pstore: using zlib compression [ 0.680264] console [pstore-1] enabled [ 0.680272] pstore: Registered ramoops as persistent store backend [ 0.680282] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.700201] cpuidle: using governor menu [ 0.701407] bpmp: waiting for handshake [ 0.701417] bpmp: handshake completed [ 0.701448] bpmp: synchronizing channels [ 0.701461] bpmp: channels synchronized [ 0.701468] bpmp: mail init ok [ 0.704378] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.704589] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.704598] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.704624] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.704631] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.704637] t19x-arm-smmu 12000000.iommu: nested translation [ 0.704647] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.704674] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.704682] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.704689] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.704696] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.708153] vdso: 2 pages (1 code @ ffffff8008fa7000, 1 data @ ffffff8009ee4000) [ 0.708213] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.710740] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.712006] tegra_aon_clk_init: ok [ 0.712021] Registering BPMP clocks... [ 0.712117] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.712732] Serial: AMBA PL011 UART driver [ 0.712850] tegra_powergate_init: DONE [ 0.712962] DTS File Name: /home/hungyu/workspace/NVIDIA/NX215B/Jetson_build_script/NX215B_output/bin/L4T/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/avt-p3668-0001-p2150-0000-nx215b.dtsi [ 0.712977] DTB Build time: Nov 21 2022 12:37:43 [ 0.716042] Tegra reboot handler registered. [ 0.723985] iommu: Adding device 14160000.pcie to group 0 [ 0.724721] iommu: Adding device 141a0000.pcie to group 1 [ 0.726055] iommu: Adding device 2490000.ether_qos to group 2 [ 0.726532] iommu: Adding device 3100000.serial to group 3 [ 0.727080] iommu: Adding device 3110000.serial to group 4 [ 0.727444] iommu: Adding device 3140000.serial to group 5 [ 0.728086] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.728261] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.728294] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.728300] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.728305] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.728354] tegra-pmc: PMC Prod config success [ 0.728543] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.728587] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.728969] iommu: Adding device 3460000.sdhci to group 6 [ 0.729490] iommu: Adding device 3440000.sdhci to group 7 [ 0.730002] iommu: Adding device 3400000.sdhci to group 8 [ 0.730535] iommu: Adding device 3210000.spi to group 9 [ 0.730951] iommu: Adding device 3230000.spi to group 10 [ 0.731374] iommu: Adding device 3270000.spi to group 11 [ 0.732430] iommu: Adding device 3160000.i2c to group 12 [ 0.732841] iommu: Adding device c240000.i2c to group 13 [ 0.733248] iommu: Adding device 3180000.i2c to group 14 [ 0.733646] iommu: Adding device 3190000.i2c to group 15 [ 0.734175] iommu: Adding device 31b0000.i2c to group 16 [ 0.734583] iommu: Adding device 31c0000.i2c to group 17 [ 0.734993] iommu: Adding device c250000.i2c to group 18 [ 0.735401] iommu: Adding device 31e0000.i2c to group 19 [ 0.736073] iommu: Adding device sound to group 20 [ 0.736695] iommu: Adding device 3510000.hda to group 21 [ 0.737367] iommu: Adding device bc00000.rtcpu to group 22 [ 0.739536] iommu: Adding device 13e10000.host1x to group 23 [ 0.739932] iommu: Adding device 13e10000.host1x:ctx0 to group 24 [ 0.740301] iommu: Adding device 13e10000.host1x:ctx1 to group 25 [ 0.740745] iommu: Adding device 13e10000.host1x:ctx2 to group 26 [ 0.741123] iommu: Adding device 13e10000.host1x:ctx3 to group 27 [ 0.741490] iommu: Adding device 13e10000.host1x:ctx4 to group 28 [ 0.741917] iommu: Adding device 13e10000.host1x:ctx5 to group 29 [ 0.742277] iommu: Adding device 13e10000.host1x:ctx6 to group 30 [ 0.742676] iommu: Adding device 13e10000.host1x:ctx7 to group 31 [ 0.743274] iommu: Adding device 15340000.vic to group 32 [ 0.743650] iommu: Adding device 15380000.nvjpg to group 33 [ 0.743939] iommu: Adding device 15500000.tsec to group 34 [ 0.744214] iommu: Adding device 15100000.tsecb to group 35 [ 0.744507] iommu: Adding device 15480000.nvdec to group 36 [ 0.744818] iommu: Adding device 15140000.nvdec1 to group 37 [ 0.745117] iommu: Adding device 154c0000.nvenc to group 38 [ 0.745386] iommu: Adding device 15a80000.nvenc1 to group 39 [ 0.745782] iommu: Adding device 15880000.nvdla0 to group 40 [ 0.746172] iommu: Adding device 158c0000.nvdla1 to group 41 [ 0.746712] iommu: Adding device 15200000.nvdisplay to group 42 [ 0.746915] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b2000(800000) [ 0.746927] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06af000(3000) [ 0.750824] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.750911] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.751728] iommu: Adding device 15210000.nvdisplay to group 43 [ 0.751798] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.753404] iommu: Adding device 15c10000.vi to group 44 [ 0.753561] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.753947] iommu: Adding device 14800000.isp to group 45 [ 0.754840] iommu: Adding device 16000000.pva0 to group 46 [ 0.755345] iommu: Adding device 16800000.pva1 to group 47 [ 0.755718] iommu: Adding device 15810000.se to group 48 [ 0.756129] iommu: Adding device 15820000.se to group 49 [ 0.756388] iommu: Adding device 15830000.se to group 50 [ 0.756666] iommu: Adding device 15840000.se to group 51 [ 0.756965] iommu: Adding device c1a0000.aon to group 52 [ 0.758480] iommu: Adding device d000000.bpmp to group 53 [ 0.758790] bpmp: ping status is 0 [ 0.758908] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.762077] bpmp d000000.bpmp: probe ok [ 0.764139] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.764535] iommu: Adding device smmu_test to group 54 [ 0.765543] mc: mapped MMIO address: 0xffffff800a640000 -> 0x2c10000 [ 0.765570] mc: mapped MMIO address: 0xffffff800a660000 -> 0x2c20000 [ 0.765595] mc: mapped MMIO address: 0xffffff800a680000 -> 0x2c30000 [ 0.765619] mc: mapped MMIO address: 0xffffff800a6a0000 -> 0x2c40000 [ 0.765643] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c50000 [ 0.765666] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2b80000 [ 0.765717] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2b90000 [ 0.765755] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2ba0000 [ 0.765785] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2bb0000 [ 0.765804] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1700000 [ 0.765829] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1710000 [ 0.765845] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1720000 [ 0.765864] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1730000 [ 0.765882] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1740000 [ 0.765898] mc: mapped MMIO address: 0xffffff800b1d0000 -> 0x1750000 [ 0.765914] mc: mapped MMIO address: 0xffffff800b1f0000 -> 0x1760000 [ 0.765967] mc: mapped MMIO address: 0xffffff800b210000 -> 0x1770000 [ 0.766041] mc-err: mcerr ops are set to t19x [ 0.771462] iommu: Adding device 2600000.dma to group 55 [ 0.776760] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.777936] GPIO line 339 (wifi-enable) hogged as output/high [ 0.777976] GPIO line 421 (usb3-enable) hogged as output/high [ 0.778044] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.778081] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.778373] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.784916] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.785023] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.785060] GPIO line 266 (w-disable1) hogged as output/high [ 0.785099] GPIO line 264 (w-disable2) hogged as output/high [ 0.785132] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.785164] GPIO line 268 (usb-to-rj45) hogged as output/high [ 0.785458] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.788129] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.788141] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.788151] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.788906] iommu: Adding device 3550000.xudc to group 56 [ 0.789582] iommu: Adding device 3610000.xhci to group 57 [ 0.791658] arm64_ras arm64_ras: probed [ 0.792021] ras_fhi_enable: FHI 470 enabled on CPU0 [ 0.792068] ras_fhi_enable: FHI 471 enabled on CPU1 [ 0.792146] ras_fhi_enable: FHI 472 enabled on CPU2 [ 0.792211] ras_fhi_enable: FHI 473 enabled on CPU3 [ 0.792285] ras_fhi_enable: FHI 474 enabled on CPU4 [ 0.792351] ras_fhi_enable: FHI 475 enabled on CPU5 [ 0.792538] carmel_ras_enable: RAS enabled on cpu0 [ 0.792707] carmel_ras_enable: RAS enabled on cpu1 [ 0.792915] carmel_ras_enable: RAS enabled on cpu2 [ 0.793113] carmel_ras_enable: RAS enabled on cpu3 [ 0.793343] carmel_ras_enable: RAS enabled on cpu4 [ 0.793571] carmel_ras_enable: RAS enabled on cpu5 [ 0.793663] carmel_ras carmel_ras: probed [ 0.794661] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.795123] tegra-cbb c600000.aon-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.795874] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.796627] tegra-cbb be00000.rce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.797407] tegra-cbb b600000.sce-noc: noc_secure_irq = 487, noc_nonsecure_irq = 486> [ 0.797760] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.798945] vdd-ac-bat: 5000 mV [ 0.799336] vdd-sdmmc1-sw: 3300 mV [ 0.799626] vdd-1v8-sd: 1800 mV [ 0.799902] vdd-3v3-cvb: 3300 mV [ 0.800193] vdd-1v8-cvb: 1800 mV [ 0.800473] vdd-epb-1v0: 1000 mV [ 0.800660] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.800942] avdd-cam-2v8: 2800 mV [ 0.801228] vdd-fan: 5000 mV [ 0.801513] vdd-hdmi-5v0: 5000 mV [ 0.801784] vdd_sys_en: 1200 mV [ 0.835154] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.839474] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.839793] SCSI subsystem initialized [ 0.840011] libata version 3.00 loaded. [ 0.840255] usbcore: registered new interface driver usbfs [ 0.840304] usbcore: registered new interface driver hub [ 0.840385] usbcore: registered new device driver usb [ 0.850734] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.853401] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 0.858721] vdd-1v0: at 1000 mV [ 0.862708] vdd-1v8-hs: at 1800 mV [ 0.866740] vdd-1v8-ls: at 1800 mV [ 0.870792] vdd-1v8-ao: at 1800 mV [ 0.874822] vddio-ddr-1v1: at 1100 mV [ 0.878602] vdd-rtc: at 800 mV [ 0.879623] spmic-ldo1: at 2375 mV [ 0.886642] vdd-ao-3v3: at 3300 mV [ 0.894683] vddio-emmc-3v3: at 3300 mV [ 0.895745] spmic-ldo4: at 1587 mV [ 0.902719] vdd-usb-3v3: at 3300 mV [ 0.910767] vddio-sdmmc1-3v3: at 3300 mV [ 0.914816] vdd-csi-1v2: at 1200 mV [ 0.915850] spmic-ldo8: at 1800 mV [ 0.920039] GPIO line 246 (gpio_default) hogged as output/high [ 0.921001] GPIO line 247 (gpio_default) hogged as output/high [ 0.921319] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.921593] max77620 4-003c: max77620 probe successful [ 0.922111] media: Linux media interface: v0.10 [ 0.922199] Linux video capture interface: v2.00 [ 0.923526] pps_core: LinuxPPS API ver. 1 registered [ 0.923532] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.923548] PTP clock support registered [ 0.923772] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.924024] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.924060] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.926613] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.926671] trusty trusty: selected api version: 3 (requested 3) [ 0.928170] Advanced Linux Sound Architecture Driver Initialized. [ 0.928914] Bluetooth: Core ver 2.22 [ 0.928951] NET: Registered protocol family 31 [ 0.928956] Bluetooth: HCI device and connection manager initialized [ 0.928967] Bluetooth: HCI socket layer initialized [ 0.928975] Bluetooth: L2CAP socket layer initialized [ 0.929001] Bluetooth: SCO socket layer initialized [ 0.931814] camchar: rtcpu character device driver loaded [ 0.932248] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.932339] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.933928] clocksource: Switched to clocksource arch_sys_counter [ 0.980401] VFS: Disk quotas dquot_6.6.0 [ 0.980506] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.980911] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.982205] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.982259] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.982530] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.982541] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.982596] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.982609] nvmap_page_pool_init: Total RAM pages: 4045231 [ 0.982620] nvmap_page_pool_init: nvmap page pool size: 505653 pages (1975 MB) [ 0.982911] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.983160] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.984629] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 0.996949] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.997159] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.997384] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 0.997576] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 0.997767] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.999070] la/ptsa driver initialized. [ 0.999438] NET: Registered protocol family 2 [ 1.000319] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.001040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.001641] TCP: Hash tables configured (established 131072 bind 65536) [ 1.001700] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.001999] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.002527] NET: Registered protocol family 1 [ 1.003227] RPC: Registered named UNIX socket transport module. [ 1.003234] RPC: Registered udp transport module. [ 1.003240] RPC: Registered tcp transport module. [ 1.003245] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.003256] PCI: CLS 0 bytes, default 64 [ 1.003507] Trying to unpack rootfs image as initramfs... [ 1.223408] Freeing initrd memory: 7068K [ 1.243297] host1x 13e10000.host1x: initialized [ 1.245570] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.249800] audit: initializing netlink subsys (disabled) [ 1.249850] audit: type=2000 audit(0.864:1): initialized [ 1.250540] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.259071] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.260484] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.261299] 9p: Installing v9fs 9p2000 file system support [ 1.266540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.266683] io scheduler noop registered [ 1.266979] io scheduler cfq registered (default) [ 1.270687] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.271849] random: fast init done [ 1.304959] iommu: Adding device 2993000.adsp to group 58 [ 1.411203] iommu: Adding device aconnect@2a41000:adsp_audio to group 59 [ 1.412144] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.423937] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.424342] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.424851] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.425233] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.425660] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.428908] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.429131] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.431728] tsec 15500000.tsec: initialized [ 1.433297] tsec 15100000.tsecb: initialized [ 1.436791] nvdec 15480000.nvdec: initialized [ 1.439137] nvdec 15140000.nvdec1: initialized [ 1.444483] falcon 15340000.vic: initialized [ 1.446476] falcon 15380000.nvjpg: initialized [ 1.448258] falcon 154c0000.nvenc: initialized [ 1.450110] falcon 15a80000.nvenc1: initialized [ 1.453116] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.454609] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.455994] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.457496] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.458941] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.460423] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.461883] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.463338] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.466803] t194-nvcsi 15a00000.nvcsi: initialized [ 1.471922] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.472261] scare-pigeon 14b00000.isp-thi: initialized [ 1.477744] pva 16000000.pva0: initialized [ 1.483229] pva 16800000.pva1: initialized [ 1.488461] nvdla 15880000.nvdla0: initialized [ 1.493265] nvdla 158c0000.nvdla1: initialized [ 1.494543] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.494557] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.494588] tegradccommon 15200000.dc_common: dma mapping done [ 1.494895] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=79 [ 1.494926] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.495177] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.495214] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.495478] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.495485] tegra_cec 3960000.tegra_cec: probed [ 1.496166] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.496217] generic_infoframe_type: 0x87 [ 1.496351] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.496377] tegradc 15200000.nvdisplay: Display dc.ffffff800bd60000 registered with id=0 [ 1.501152] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.501160] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.501165] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.501385] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.501394] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.504398] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.504407] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.506974] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.508218] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.508228] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.508516] kfuse 3830000.kfuse: initialized [ 1.512648] tegradc 15200000.nvdisplay: probed [ 1.513334] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.514135] Console: switching to colour frame buffer device 80x30 [ 1.514162] tegradc 15200000.nvdisplay: fb registered [ 1.514502] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.515471] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.515552] generic_infoframe_type: 0x87 [ 1.515724] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.515783] tegradc 15210000.nvdisplay: Display dc.ffffff800bed0000 registered with id=1 [ 1.516263] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.516274] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.516596] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.517128] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350878 [ 1.517725] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.518586] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.519653] console [ttyTCU0] enabled [ 1.519912] [drm] Initialized [ 1.520460] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.520467] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.522957] tegradc 15210000.nvdisplay: probed [ 1.536905] brd: module loaded [ 1.542543] loop: module loaded [ 1.542607] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.542754] tegra_profiler: auth: init [ 1.543554] THERMAL EST: found 3 subdevs [ 1.543571] THERMAL EST num_resources: 0 [ 1.543577] [THERMAL EST subdev 0] [ 1.543583] [THERMAL EST subdev 1] [ 1.543589] [THERMAL EST subdev 2] [ 1.543604] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.543918] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.543923] THERMAL EST: thz register success. [ 1.544086] THERMAL EST: end of probe, return err: 0 [ 1.544984] sd: No Scsi addr parsed to reserve index [ 1.545041] hisi_sas: driver version v1.6 [ 1.556015] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.556026] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.556037] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.556254] 1 ofpart partitions found on MTD device spi6.0 [ 1.556260] Creating 1 MTD partitions on "spi6.0": [ 1.556268] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.558681] libphy: Fixed MDIO Bus: probed [ 1.560358] tun: Universal TUN/TAP device driver, 1.6 [ 1.560364] tun: (C) 1999-2004 Max Krasnyansky [ 1.561464] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.561470] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.561594] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.561599] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.561722] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.561728] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.561820] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.561825] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.573856] tegradc 15210000.nvdisplay: fb registered [ 1.574148] gpio tegra-gpio wake60 for gpio=96(M:0) [ 1.574642] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.574720] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.574792] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.576990] Parent Clock set for DC pll_d [ 1.639968] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.640694] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.640709] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.667736] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 1.667743] Extcon AUX0(HDMI) enable [ 1.805344] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.805988] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 76 4e ee [ 1.806011] Using phyrst_lpmode = 1 from DT [ 1.806109] libphy: dwc_phy: probed [ 1.806692] tegradc 15210000.nvdisplay: blank - powerdown [ 1.808733] PPP generic driver version 2.4.2 [ 1.809146] PPP BSD Compression module registered [ 1.809152] PPP Deflate Compression module registered [ 1.809167] PPP MPPE Compression module registered [ 1.809172] NET: Registered protocol family 24 [ 1.809216] usbcore: registered new interface driver r8152 [ 1.809248] usbcore: registered new interface driver asix [ 1.809282] usbcore: registered new interface driver cdc_ether [ 1.809307] usbcore: registered new interface driver net1080 [ 1.809334] usbcore: registered new interface driver cdc_subset [ 1.809358] usbcore: registered new interface driver zaurus [ 1.809394] usbcore: registered new interface driver cdc_ncm [ 1.809793] VFIO - User Level meta-driver version: 0.3 [ 1.811156] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.811175] ehci-pci: EHCI PCI platform driver [ 1.811212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.811220] ohci-pci: OHCI PCI platform driver [ 1.811248] ohci-platform: OHCI generic platform driver [ 1.816398] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.818368] tegra-xusb 3610000.xhci: extcon 0: ffffffc3ec6d0400 id [ 1.819484] usbcore: registered new interface driver uas [ 1.819606] usbcore: registered new interface driver usb-storage [ 1.819786] usbcore: registered new interface driver usbserial [ 1.820812] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.820844] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.820862] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.821602] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.821652] tegra-xusb 3610000.xhci: irq 465, io mem 0x03610000 [ 1.821874] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.821880] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.821884] usb usb1: Product: xHCI Host Controller [ 1.821889] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.821893] usb usb1: SerialNumber: 3610000.xhci [ 1.822522] hub 1-0:1.0: USB hub found [ 1.822565] hub 1-0:1.0: 4 ports detected [ 1.823148] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.823158] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.823167] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.823403] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.823409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.823414] usb usb2: Product: xHCI Host Controller [ 1.823418] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.823422] usb usb2: SerialNumber: 3610000.xhci [ 1.824081] hub 2-0:1.0: USB hub found [ 1.824119] hub 2-0:1.0: 4 ports detected [ 1.825066] Wake76 for irq=199 [ 1.825070] Wake77 for irq=199 [ 1.825073] Wake78 for irq=199 [ 1.825075] Wake79 for irq=199 [ 1.825078] Wake80 for irq=199 [ 1.825080] Wake81 for irq=199 [ 1.825083] Wake82 for irq=199 [ 1.825155] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.825161] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.825226] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.825305] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.826307] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.826315] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.826346] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.826594] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.827127] mousedev: PS/2 mouse device common for all mice [ 1.827240] usbcore: registered new interface driver xpad [ 1.840381] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 1.840386] Extcon AUX0(HDMI) disable [ 1.866136] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.866340] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.867430] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.867962] tegradc 15210000.nvdisplay: unblank [ 1.869323] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.869550] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.869760] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.876671] Parent Clock set for DC pll_d [ 1.881052] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.882417] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.918399] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 1.918403] Extcon AUX0(HDMI) enable [ 1.926497] usb usb2: usb_suspend_both: status 0 [ 1.932625] tegradc 15210000.nvdisplay: sync windows ret = 247 [ 1.932712] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 1.932718] Extcon HDMI: HPD enabled [ 1.932745] tegradc 15210000.nvdisplay: hdmi: plugged [ 1.959453] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.960714] Wake73 for irq=42 [ 1.962050] rtc rtc1: alarm rtc device [ 1.962068] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.962096] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.962234] i2c /dev entries driver [ 1.964601] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.965055] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.965064] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.965729] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.989300] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.989360] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.989636] imx219 9-0010: board setup failed [ 1.989801] imx219: probe of 9-0010 failed with error -121 [ 1.990292] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.013538] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.013637] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.013961] imx219 10-0010: board setup failed [ 2.014135] imx219: probe of 10-0010 failed with error -121 [ 2.015452] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.022167] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.022560] FAN dev name: pwm-fan [ 2.022611] FAN:gpio request success. [ 2.022647] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.022678] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.022940] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.023108] gpio tegra-gpio wake4 for gpio=105(N:1) [ 2.023180] pwm_fan_driver pwm-fan: fan tach request irq success [ 2.023200] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.023758] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.023768] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.023776] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.023783] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.023790] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.023797] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.023803] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.023810] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.023820] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.023850] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.025287] device-mapper: uevent: version 1.0.3 [ 2.025757] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.029388] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.030457] cpuidle: Initializing cpuidle driver [ 2.031622] sdhci: Secure Digital Host Controller Interface driver [ 2.031627] sdhci: Copyright(c) Pierre Ossman [ 2.031631] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.033383] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.035935] CMDQ: cmdq_platfm_init successful [ 2.036492] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 2.037721] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 2.040852] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 322 [ 2.042819] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.043470] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.044935] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 247 [ 2.050041] tegra-se-nvhost 15810000.se: initialized [ 2.051701] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.053026] tegra-se-nvhost 15820000.se: initialized [ 2.054227] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.055205] tegra-se-nvhost 15830000.se: initialized [ 2.055830] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.056874] tegra-se-nvhost 15840000.se: initialized [ 2.057767] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.058820] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.058981] hidraw: raw HID events driver (C) Jiri Kosina [ 2.062308] usbcore: registered new interface driver usbhid [ 2.062313] usbhid: USB HID core driver [ 2.066628] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.067615] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.068064] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.068718] denver_knobs_init:MTS_VERSION:53250041 [ 2.069034] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.069754] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.070148] t19x_cache tegra-cache: probed [ 2.072282] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.072290] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.072905] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.073327] PLL_AON clock registered [ 2.075074] Clocks initialized successfully [ 2.076648] nvpmodel: initialized successfully [ 2.077731] trusty-virtio trusty:virtio: initializing [ 2.077960] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.077967] trusty_ipc virtio0: vring0: va(pa) ffffffc3d9bbe000(0) qsz 32 notifyid 1 [ 2.077979] trusty_ipc virtio0: vring1: va(pa) ffffffc3d8450000(0) qsz 32 notifyid 2 [ 2.078116] trusty-virtio trusty:virtio: initializing done [ 2.078248] trusty_ipc virtio0: is online [ 2.078743] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.079156] usbcore: registered new interface driver snd-usb-audio [ 2.087116] gpio tegra-gpio wake51 for gpio=130(Q:2) [ 2.087176] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.090039] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.090111] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.100162] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.100345] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.100599] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.100792] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.123869] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.136934] mmc0: periodic cache flush enabled [ 2.136951] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.141545] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.141794] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.144988] OPE platform probe [ 2.145075] OPE platform probe successful [ 2.146086] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.149960] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.150318] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.164874] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.186626] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 2.186634] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.186639] usb 1-2: Product: 4-Port USB 2.1 Hub [ 2.186644] usb 1-2: Manufacturer: Generic [ 2.188188] hub 1-2:1.0: USB hub found [ 2.189260] hub 1-2:1.0: 4 ports detected [ 2.226898] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.227019] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.227129] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.227245] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.227352] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.227463] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.227596] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.227720] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.227869] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.227988] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.228096] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.228191] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.228275] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.228360] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.228453] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.228542] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.228629] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.228731] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.228832] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.228931] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.256814] u32 classifier [ 2.256820] Actions configured [ 2.256890] Initializing XFRM netlink socket [ 2.257577] NET: Registered protocol family 10 [ 2.258383] NET: Registered protocol family 17 [ 2.258401] NET: Registered protocol family 15 [ 2.258464] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.258556] Bluetooth: RFCOMM socket layer initialized [ 2.258572] Bluetooth: RFCOMM ver 1.11 [ 2.258579] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.258592] Bluetooth: HIDP socket layer initialized [ 2.258610] 9pnet: Installing 9P2000 support [ 2.258652] Key type dns_resolver registered [ 2.258933] Registered cp15_barrier emulation handler [ 2.258955] Registered setend emulation handler [ 2.260533] registered taskstats version 1 [ 2.260809] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.262159] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.262198] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.262207] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.262213] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.298782] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.334095] usb 2-3: New USB device found, idVendor=0bda, idProduct=0411 [ 2.334104] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.334109] usb 2-3: Product: 4-Port USB 3.1 Hub [ 2.334113] usb 2-3: Manufacturer: Generic [ 2.344341] hub 2-3:1.0: USB hub found [ 2.345858] hub 2-3:1.0: 4 ports detected [ 2.481945] usb 1-2.2: new full-speed USB device number 3 using tegra-xusb [ 2.503760] usb 1-2.2: New USB device found, idVendor=0a05, idProduct=7211 [ 2.503766] usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.503771] usb 1-2.2: Product: USB2.0 HUB [ 2.504529] hub 1-2.2:1.0: USB hub found [ 2.504668] hub 1-2.2:1.0: 4 ports detected [ 2.525979] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.585943] usb 1-2.4: new high-speed USB device number 4 using tegra-xusb [ 2.590506] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.590512] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.608724] usb 1-2.4: New USB device found, idVendor=05e3, idProduct=0610 [ 2.608732] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.608737] usb 1-2.4: Product: USB2.1 Hub [ 2.608741] usb 1-2.4: Manufacturer: GenesysLogic [ 2.609591] hub 1-2.4:1.0: USB hub found [ 2.609919] hub 1-2.4:1.0: 4 ports detected [ 2.641981] usb 1-2.2: usb_suspend_both: status 0 [ 2.690446] usb 2-3.1: new SuperSpeed USB device number 3 using tegra-xusb [ 2.716695] usb 2-3.1: New USB device found, idVendor=0b95, idProduct=1790 [ 2.716704] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.716710] usb 2-3.1: Product: AX88179 [ 2.716714] usb 2-3.1: Manufacturer: ASIX Elec. Corp. [ 2.716718] usb 2-3.1: SerialNumber: 00000000000001 [ 2.777122] tegra-pcie-dw 14160000.pcie: link is down [ 2.777254] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.777262] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.777271] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.777278] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.777283] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.777322] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.777488] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.777737] iommu: Adding device 0004:00:00.0 to group 60 [ 2.777985] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.778026] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.778224] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.778231] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.778374] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.778458] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.778534] iommu: Removing device 0004:00:00.0 from group 60 [ 2.778559] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.780336] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.781140] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.781401] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.781469] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.806279] usb 2-3.4: new SuperSpeed USB device number 4 using tegra-xusb [ 2.857431] usb 2-3.4: New USB device found, idVendor=05e3, idProduct=0626 [ 2.857441] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.857446] usb 2-3.4: Product: USB3.1 Hub [ 2.857450] usb 2-3.4: Manufacturer: GenesysLogic [ 2.862415] hub 2-3.4:1.0: USB hub found [ 2.863368] hub 2-3.4:1.0: 4 ports detected [ 2.891110] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.891132] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.891144] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.891150] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.933970] usb 1-2.4.4: new full-speed USB device number 5 using tegra-xusb [ 2.959359] usb 1-2.4.4: New USB device found, idVendor=0403, idProduct=c630 [ 2.959365] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.959370] usb 1-2.4.4: Product: LCD2USB Interface [ 2.959374] usb 1-2.4.4: Manufacturer: wch.cn [ 2.959378] usb 1-2.4.4: SerialNumber: LCD2USB Interface [ 2.997950] usb 2-3.4: usb_suspend_both: status 0 [ 3.069931] usb 1-2.2.2: new full-speed USB device number 6 using tegra-xusb [ 3.093050] usb 1-2.2.2: New USB device found, idVendor=046d, idProduct=c52e [ 3.093056] usb 1-2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.093061] usb 1-2.2.2: Product: USB Receiver [ 3.093065] usb 1-2.2.2: Manufacturer: Logitech [ 3.095844] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.0/0003:046D:C52E.0001/input/input4 [ 3.154600] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-2.2.2/input0 [ 3.157431] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:046D:C52E.0002/input/input5 [ 3.214291] hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-2.2.2/input1 [ 3.293971] usb 1-2.2.4: new full-speed USB device number 7 using tegra-xusb [ 3.317362] usb 1-2.2.4: New USB device found, idVendor=046d, idProduct=c534 [ 3.317368] usb 1-2.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.317372] usb 1-2.2.4: Product: USB Receiver [ 3.317378] usb 1-2.2.4: Manufacturer: Logitech [ 3.320129] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/0003:046D:C534.0003/input/input6 [ 3.378675] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-2.2.4/input0 [ 3.381551] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:046D:C534.0004/input/input7 [ 3.405865] tegra-pcie-dw 141a0000.pcie: link is down [ 3.406026] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.406034] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.406043] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.406049] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.406054] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.406084] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.406221] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.406455] iommu: Adding device 0005:00:00.0 to group 60 [ 3.406639] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.406686] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.406878] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.406885] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.407074] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.407166] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.407266] iommu: Removing device 0005:00:00.0 from group 60 [ 3.407298] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.409634] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.420100] tegra-cbb 14040000.cv-noc: noc_secure_irq = 91, noc_nonsecure_irq = 90> [ 3.427066] tegra194-isp5 14800000.isp: initialized [ 3.433864] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.438338] hid-generic 0003:046D:C534.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-2.2.4/input1 [ 3.439315] tegra194-vi5 15c10000.vi: initialized [ 3.443892] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.443964] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.444192] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.448571] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.448614] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.448620] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.448712] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.448751] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.448756] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.452708] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.452772] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.452779] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.453170] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.453206] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.453211] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.453701] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.453750] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.453755] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.454257] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.455100] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.536100] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.536489] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.536759] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.536991] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.537347] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.537406] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.537644] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (67) [ 3.537649] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.538732] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.539197] Wake83 for irq=211 [ 3.539265] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.539338] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.539475] input: gpio-keys as /devices/gpio-keys/input/input8 [ 3.571009] tegra_rtc c2a0000.rtc: setting system clock to 2023-01-03 07:30:45 UTC (1672731045) [ 3.571510] mmcblk mmc0:0001: Card claimed for testing. [ 3.608596] bpmp: mounted debugfs mirror [ 3.615531] ALSA device list: [ 3.615537] #0: tegra-hda-xnx at 0x3518000 irq 66 [ 3.615540] #1: jetson-xaviernx-ape [ 3.618003] Freeing unused kernel memory: 8704K [ 3.656936] Root device found: mmcblk0p1 [ 3.658655] Found dev node: /dev/mmcblk0p1 [ 3.685101] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.687717] Rootfs mounted over mmcblk0p1 [ 3.717199] Switching from initrd to actual rootfs [ 3.835652] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.851547] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.852235] systemd[1]: Detected architecture arm64. [ 3.864178] systemd[1]: Set hostname to . [ 3.947990] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.948019] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.105554] random: systemd: uninitialized urandom read (16 bytes read) [ 4.106235] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.106410] random: systemd: uninitialized urandom read (16 bytes read) [ 4.106544] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.106603] random: systemd: uninitialized urandom read (16 bytes read) [ 4.109326] systemd[1]: Created slice System Slice. [ 4.109714] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.110216] systemd[1]: Listening on Journal Audit Socket. [ 4.156196] usbcore: registered new interface driver btusb [ 4.177062] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.215896] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.503182] systemd-journald[2391]: Received request to flush runtime journal from PID 1 [ 5.303609] random: crng init done [ 5.303717] random: 7 urandom warning(s) missed due to ratelimiting [ 5.454380] using random self ethernet address [ 5.454503] using random host ethernet address [ 5.577124] cpu-throttle-alert cooling device registered. [ 5.595254] gpu-throttle-alert cooling device registered. [ 5.595690] aux-throttle-alert cooling device registered. [ 5.923124] usb 2-3.4: usb_suspend_both: status 0 [ 6.049937] usb 2-3.4: usb_suspend_both: status 0 [ 6.069327] Mass Storage Function, version: 2009/09/11 [ 6.069335] LUN: removable file: (no medium) [ 6.083279] using random self ethernet address [ 6.083406] using random host ethernet address [ 6.121335] rndis0: HOST MAC 9a:a6:aa:25:70:88 [ 6.121556] rndis0: MAC 9a:a6:aa:25:70:89 [ 6.138725] usb0: HOST MAC 9a:a6:aa:25:70:8a [ 6.138773] usb0: MAC 9a:a6:aa:25:70:8b [ 6.138799] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.141307] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.141330] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.141366] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.141652] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.141669] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.142100] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.142112] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.142302] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.173562] l4tbr0: port 1(rndis0) entered blocking state [ 6.173572] l4tbr0: port 1(rndis0) entered disabled state [ 6.173775] device rndis0 entered promiscuous mode [ 6.181855] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.196391] l4tbr0: port 2(usb0) entered blocking state [ 6.196400] l4tbr0: port 2(usb0) entered disabled state [ 6.197881] device usb0 entered promiscuous mode [ 6.222089] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.490742] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.674568] ras_fhi_disable: FHI 474 disabled [ 6.684817] CPU4: shutdown [ 6.684927] psci: CPU4 killed (polled 0 ms) [ 6.738532] ras_fhi_disable: FHI 475 disabled [ 6.739854] CPU5: shutdown [ 6.741031] psci: CPU5 killed (polled 0 ms) [ 6.747369] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.810938] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.822205] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.044295] zram: Added device: zram0 [ 7.048152] zram: Added device: zram1 [ 7.053854] zram: Added device: zram2 [ 7.054933] zram: Added device: zram3 [ 7.086048] zram0: detected capacity change from 0 to 2073178112 [ 7.124295] Adding 2024584k swap on /dev/zram0. Priority:5 extents:1 across:2024584k SS [ 7.132639] zram1: detected capacity change from 0 to 2073178112 [ 7.149840] Adding 2024584k swap on /dev/zram1. Priority:5 extents:1 across:2024584k SS [ 7.157234] zram2: detected capacity change from 0 to 2073178112 [ 7.187434] Adding 2024584k swap on /dev/zram2. Priority:5 extents:1 across:2024584k SS [ 7.200527] zram3: detected capacity change from 0 to 2073178112 [ 7.238254] Adding 2024584k swap on /dev/zram3. Priority:5 extents:1 across:2024584k SS [ 7.321614] ax88179_178a: loading out-of-tree module taints kernel. [ 7.426781] Bridge firewalling registered [ 7.485198] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 7.711514] ASIX USB Ethernet Adapter:v1.20.0 http://www.asix.com.tw [ 7.711529] ax88179_178a 2-3.1:1.0 (unnamed net_device) (uninitialized): mtu 1500 [ 7.712145] ax88179_178a 2-3.1:1.0 eth1: register 'ax88179_178a' at usb-3610000.xhci-3.1, , 00:18:1a:f2:a5:a4 [ 7.715471] usbcore: registered new interface driver ax88179_178a [ 7.988636] Netfilter messages via NETLINK v0.30. [ 7.999027] ctnetlink v0.93: registering with nfnetlink. [ 8.296535] tegradc 15210000.nvdisplay: unblank [ 8.296547] tegradc 15200000.nvdisplay: blank - powerdown [ 8.322568] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 8.490994] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.822141] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.777208] fuse init (API version 7.26) [ 11.814115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.814130] Bluetooth: BNEP socket layer initialized [ 12.630305] tegradc 15210000.nvdisplay: unblank [ 12.630321] tegradc 15200000.nvdisplay: blank - powerdown [ 16.254783] gpio tegra-gpio wake20 for gpio=52(G:4) [ 16.262480] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.865970] usb 1-2.4.2: new high-speed USB device number 8 using tegra-xusb [ 24.886882] usb 1-2.4.2: New USB device found, idVendor=13fd, idProduct=0840 [ 24.886892] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 24.886899] usb 1-2.4.2: Product: External [ 24.886908] usb 1-2.4.2: Manufacturer: Generic [ 24.886947] usb 1-2.4.2: SerialNumber: 5331423336594A4743303053 [ 24.888001] usb-storage 1-2.4.2:1.0: USB Mass Storage device detected [ 24.888406] scsi host0: usb-storage 1-2.4.2:1.0 [ 25.919017] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW SU-208GB H100 PQ: 0 ANSI: 0 [ 25.948609] sr 0:0:0:0: [sr0] scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 25.948618] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 25.949053] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 26.678826] gpio tegra-gpio wake20 for gpio=52(G:4) [ 26.687367] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.142142] vdd-sdmmc1-sw: disabling [ 34.142153] vdd-1v8-sd: disabling [ 34.142160] vdd-1v8-cvb: disabling [ 34.142165] vdd-epb-1v0: disabling [ 34.142170] avdd-cam-2v8: disabling [ 34.142176] vdd-fan: disabling [ 34.142181] vdd_sys_en: disabling