[BEGIN] 2022/6/20 15:47:53 [0000.229] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-e75fdd51) [0000.237] I> Boot-device: eMMC [0000.244] I> sdmmc bdev is already initialized [0000.249] I> pmic: reset reason (nverc) : 0x80 [0000.282] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.302] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.308] W> No valid slot number is found in scratch register [0000.313] W> Return default slot: _a [0000.317] I> A/B: bin_type (16) slot 0 [0000.321] I> Loading partition bpmp-fw at 0xd7800000 [0000.325] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.331] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.356] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.361] W> No valid slot number is found in scratch register [0000.367] W> Return default slot: _a [0000.370] I> A/B: bin_type (17) slot 0 [0000.374] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.379] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.385] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.404] I> Binary(17) of size 113040 is loaded @ 0xd79e4400 [0000.432] I> Loading SCE-FW ... [0000.435] W> No valid slot number is found in scratch register [0000.440] W> Return default slot: _a [0000.444] I> A/B: bin_type (12) slot 0 [0000.447] I> Loading partition sce-fw at 0xd7300000 [0000.452] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.458] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.477] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.482] I> Init SCE [0000.485] I> Loading APE-FW ... [0000.488] W> No valid slot number is found in scratch register [0000.493] W> Return default slot: _a [0000.497] I> A/B: bin_type (11) slot 0 [0000.500] I> Loading partition adsp-fw at 0xd7400000 [0000.505] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.511] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.530] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.535] I> Copy BTCM section [0000.538] W> No valid slot number is found in scratch register [0000.544] W> Return default slot: _a [0000.547] I> A/B: bin_type (13) slot 0 [0000.551] I> Loading partition cpu-bootloader at 0x96000000 [0000.557] I> Reading two headers - addr:0x96000000 blocks:1 [0000.562] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.583] I> Binary(13) of size 308784 is loaded @ 0x96000000 [0000.589] W> No valid slot number is found in scratch register [0000.594] W> Return default slot: _a [0000.598] I> A/B: bin_type (20) slot 0 [0000.601] I> Loading partition bootloader-dtb at 0x85205400 [0000.607] I> Reading two headers - addr:0x85205400 blocks:1 [0000.612] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1 [0000.632] I> Binary(20) of size 192320 is loaded @ 0x85205400 [0000.638] W> No valid slot number is found in scratch register [0000.643] W> Return default slot: _a [0000.647] I> A/B: bin_type (14) slot 0 [0000.651] I> Loading partition secure-os at 0x85305600 [0000.656] I> Reading two headers - addr:0x85305600 blocks:1 [0000.661] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1 [0000.683] I> Binary(14) of size 402864 is loaded @ 0x85305600 [0000.691] I> TOS boot-params @ 0x85000000 [0000.695] I> TOS params prepared [0000.698] I> Loading EKS ... [0000.700] I> A/B: bin_type (15) slot 0 [0000.704] I> Loading partition eks at 0x85905800 [0000.709] I> Reading two headers - addr:0x85905800 blocks:1 [0000.714] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1 [0000.733] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.738] I> EKB detected (length: 0x400) @ 0x85905800 [0000.743] I> Copied encrypted keys [0000.747] I> boot profiler @ 0x175844000 [0000.751] I> boot profiler for TOS @ 0x175844000 [0000.756] I> Unhalting SCE [0000.758] I> Primary Memory Start:80000000 Size:70000000 [0000.764] I> Extended Memory Start:f0110000 Size:856f0000 [0000.770] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 08:55:30, Feb 19 2022 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 347: key_mgnt_processing ....... hwkey-agent: 255: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0000.943] I> Welcome to Cboot [0000.946] I> Cboot Version: t186-704e62f2 [0000.950] I> CPU-BL Params @ 0x175800000 [0000.954] I> 0) Base:0x00000000 Size:0x00000000 [0000.958] I> 1) Base:0x177f00000 Size:0x00100000 [0000.963] I> 2) Base:0x177e00000 Size:0x00100000 [0000.967] I> 3) Base:0x177d00000 Size:0x00100000 [0000.972] I> 4) Base:0x177c00000 Size:0x00100000 [0000.976] I> 5) Base:0x177b00000 Size:0x00100000 [0000.981] I> 6) Base:0x177800000 Size:0x00200000 [0000.985] I> 7) Base:0x177400000 Size:0x00400000 [0000.990] I> 8) Base:0x177a00000 Size:0x00100000 [0000.994] I> 9) Base:0x177300000 Size:0x00100000 [0000.999] I> 10) Base:0x176800000 Size:0x00800000 [0001.003] I> 11) Base:0x30000000 Size:0x00040000 [0001.008] I> 12) Base:0xf0000000 Size:0x00100000 [0001.012] I> 13) Base:0x30040000 Size:0x00001000 [0001.016] I> 14) Base:0x30048000 Size:0x00001000 [0001.021] I> 15) Base:0x30049000 Size:0x00001000 [0001.025] I> 16) Base:0x3004a000 Size:0x00001000 [0001.030] I> 17) Base:0x3004b000 Size:0x00001000 [0001.034] I> 18) Base:0x3004c000 Size:0x00001000 [0001.039] I> 19) Base:0x3004d000 Size:0x00001000 [0001.043] I> 20) Base:0x3004e000 Size:0x00001000 [0001.047] I> 21) Base:0x3004f000 Size:0x00001000 [0001.052] I> 22) Base:0x00000000 Size:0x00000000 [0001.056] I> 23) Base:0xf0100000 Size:0x00010000 [0001.061] I> 24) Base:0x00000000 Size:0x00000000 [0001.065] I> 25) Base:0x00000000 Size:0x00000000 [0001.070] I> 26) Base:0x00000000 Size:0x00000000 [0001.074] I> 27) Base:0x00000000 Size:0x00000000 [0001.079] I> 28) Base:0x84400000 Size:0x00400000 [0001.083] I> 29) Base:0x30000000 Size:0x00010000 [0001.087] I> 30) Base:0x178000000 Size:0x08000000 [0001.092] I> 31) Base:0x00000000 Size:0x00000000 [0001.096] I> 32) Base:0x176000000 Size:0x00600000 [0001.101] I> 33) Base:0x80000000 Size:0x70000000 [0001.105] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.110] I> 35) Base:0x00000000 Size:0x00000000 [0001.114] I> 36) Base:0x00000000 Size:0x00000000 [0001.119] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.123] I> 38) Base:0x84000000 Size:0x00400000 [0001.128] I> 39) Base:0x96000000 Size:0x02000000 [0001.132] I> 40) Base:0x85000000 Size:0x01200000 [0001.136] I> 41) Base:0x175800000 Size:0x00500000 [0001.141] I> 42) Base:0x00000000 Size:0x00000000 [0001.145] I> 43) Base:0x00000000 Size:0x00000000 [0001.150] GIC-SPI Target CPU: 4 [0001.153] Interrupts Init done [0001.156] calling constructors [0001.160] initializing heap [0001.162] initializing threads [0001.165] initializing timers [0001.169] creating bootstrap completion thread [0001.173] top of bootstrap2() [0001.177] CPU: ARM Cortex A57 [0001.180] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.185] initializing platform [0001.188] I> Bl_dtb @0x85205400 [0001.191] I> gpio framework initialized [0001.196] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.205] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.213] I> GPIO framework and drivers are initialized. [0001.218] I> Boot-device: eMMC [0001.225] I> sdmmc bdev is already initialized [0001.256] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.273] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.279] W> opt-in fuse is not set, skip fuse_burning [0001.284] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.289] W> No valid slot number is found in scratch register [0001.295] W> Return default slot: _a [0001.305] I> A/B: bin_type (21) slot 0 [0001.308] I> Loading kernel-dtb from partition [0001.312] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.330] I> Kernel_dtb @0x80000000 [0001.333] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.341] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.351] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.359] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.365] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.373] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.383] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.391] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.399] I> fixed regulator driver initialized [0001.421] I> register 'maxim' power off handle [0001.426] I> virtual i2c enabled [0001.429] I> registered 'maxim,max77620' pmic [0001.433] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.443] E> failed to read label property for node 149928: 13 [0001.450] E> failed to read reg property for node 150024: 13 [0001.457] E> failed to read reg property for node 150076: 13 [0001.464] E> failed to read label property for node 150160: 13 [0001.471] E> failed to read reg property for node 150228: 13 [0001.477] E> failed to read reg property for node 150300: 13 [0001.485] I> Find /i2c@c250000's alias i2c7 [0001.489] I> Reading eeprom i2c=7 address=0x50 [0001.518] I> Device at /i2c@c250000:0x50 [0001.522] I> Reading eeprom i2c=7 address=0x57 [0001.550] I> Device at /i2c@c250000:0x57 [0001.555] I> Find /i2c@3160000's alias i2c0 [0001.559] I> Reading eeprom i2c=0 address=0x50 [0001.564] E> I2C: slave not found in slaves. [0001.568] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.575] E> I2C_DEV: Failed to send register address 0x00000000. [0001.581] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.591] E> eeprom: Failed to read I2C slave device [0001.595] I> Eeprom read failed 0x3526070d [0001.600] I> Find /i2c@3180000's alias i2c2 [0001.604] I> Reading eeprom i2c=2 address=0x54 [0001.608] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.613] C> GPIO driver for chip_id 0x2 could not be found [0001.618] E> cam_eeprom_read: Can't get gpio driver [0001.623] I> Eeprom read failed 0x4d4d000d [0001.627] I> Reading eeprom i2c=2 address=0x57 [0001.631] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.636] C> GPIO driver for chip_id 0x2 could not be found [0001.641] E> cam_eeprom_read: Can't get gpio driver [0001.646] I> Eeprom read failed 0x4d4d000d [0001.650] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0001.655] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.666] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0001.671] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.694] I> regulator 'vdd-hdmi-5v0' already enabled [0001.706] I> regulator 'vdd-hdmi-5v0' already enabled [0001.710] E> tegrabl_display_init_regulator: hdmi cable is not connected [0001.717] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.724] E> cannot find any other nvdisp nodes [0001.729] E> no valid display unit config found in dtb [0001.734] W> display init failed [0001.737] initializing target [0001.741] calling apps_init() [0001.744] starting app kernel_boot_app [0001.766] I> found decompressor handler: lz4-legacy [0001.771] I> decompressing BMP blob ... [0001.783] I> Kernel type = Normal [0001.786] I> ########## Fixed storage boot ########## [0001.791] I> Loading kernel-bootctrl from partition [0001.796] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.810] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.817] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0001.824] W> No valid slot number is found in scratch register [0001.829] W> Return default slot: _a [0001.833] I> A/B: bin_type (24) slot 0 [0001.848] I> Boot image size read from image header: 99035 [0001.854] I> Boot image load address: 0x80400000 [0001.858] I> Loading kernel from partition [0001.862] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.806] I> Validate kernel ... [0002.809] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.817] I> Decrypt the buffer ... [0002.820] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.829] I> done [0002.831] I> Checking boot.img header magic ... [0002.835] I> [OK] [0002.837] I> kernel-dtb is already loaded [0002.841] I> Validate kernel-dtb ... [0002.844] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0002.851] I> Decrypt the buffer ... [0002.855] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.864] I> done [0002.865] I> Kernel hdr @0x80400000 [0002.869] I> Kernel dtb @0x80000000 [0002.872] I> decompressor handler not found [0002.876] I> Copying kernel image (626741 bytes) from 0x80400800 to 0x80600000 ... [0002.883] I> Done [0002.885] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0002.892] I> Updated bpmp info to DTB [0002.897] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0002.902] I> Updated initrd info to DTB [0002.905] W> WARN: Fail to override "console=none" in commandline [0002.911] I> Active rootfs suffix: [0002.914] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.922] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.929] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.936] I> disabled_core_mask: 0xffffff0c [0002.940] W> No valid slot number is found in scratch register [0002.946] W> Return default slot: _a [0002.949] I> Active slot suffix: [0002.952] I> add_boot_slot_suffix: slot_suffix = [0002.957] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0002.999] I> Updated bootarg info to DTB [0003.002] W> MAC addr invalid! [0003.005] E> Failed to get WIFI MAC address [0003.009] W> MAC addr invalid! [0003.012] E> Failed to get Bluetooth MAC address [0003.017] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:62:82:ef [0003.023] E> Found no plugin manager ids in source DT [0003.028] W> Add plugin manager ids from board info [0003.032] W> "plugin-manager" doesn't exist, creating [0003.037] W> "ids" doesn't exist, creating [0003.041] W> "connection" doesn't exist, creating [0003.046] W> "configs" doesn't exist, creating [0003.050] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0003.055] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.066] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0003.071] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0003.082] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.089] W> "i2c@c250000" doesn't exist, creating [0003.094] W> "module@0x50" doesn't exist, creating [0003.099] I> Adding plugin-manager/ids/XXXX-XXXX-XXX=/i2c@c250000:module@0x57 [0003.106] W> "module@0x57" doesn't exist, creating [0003.112] I> Adding plugin-manager/ids/3636-0001-300-H [0003.118] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.123] I> Adding plugin-manager/configs/3636-power-config 00 [0003.129] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.135] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.141] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.147] I> Adding plugin-manager/configs/3636-display-config 00 [0003.153] I> Adding plugin-manager/cvm [0003.157] W> "chip-id" doesn't exist, creating [0003.161] I> Adding plugin-manager/chip-id/A02P [0003.166] W> "odm-data" doesn't exist, creating [0003.170] I> Adding /chosen/plugin-manager/odm-data [0003.178] I> added [base:0x80000000, size:0x70000000] to /memory [0003.184] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.190] I> added [base:0x175e00000, size:0x200000] to /memory [0003.196] I> added [base:0x176600000, size:0x200000] to /memory [0003.201] I> added [base:0x177000000, size:0x200000] to /memory [0003.207] I> Updated memory info to DTB [0003.211] E> add_disp_param: failed to get display params for du=0 [0003.218] W> "reset" doesn't exist, creating [0003.222] W> "pmc-reset-reason" doesn't exist, creating [0003.228] W> "pmic-reset-reason" doesn't exist, creating [0003.234] I> Adding ecid(000000016411f2040800000007018280) to DT [0003.240] I> disabled_core_mask: 0xffffff0c [0003.248] I> Add serial number:1424621014753 as DT property [0003.255] I> Plugin-manager override starting [0003.261] I> node /plugin-manager/fragement@0 matches [0003.268] I> node /plugin-manager/fragement@3 matches [0003.281] I> Disable plugin-manager status in FDT [0003.286] I> Plugin-manager override finished successfully [0003.291] I> tegrabl_load_kernel_and_dtb: Done [0003.296] E> tegrabl_display_clear: display is not initialized [0003.301] W> Boot logo display failed... [0003.305] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g4335beb692 (Feb 19 2022 - 08:55:34 -0800) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 858 bytes read in 22 ms (38.1 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 7238358 bytes read in 190 ms (36.3 MiB/s) Retrieving file: /boot/Image 34484232 bytes read in 828 ms (39.7 MiB/s) append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 0000000080034036 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5403-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Sat Feb 19 08:58:27 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 1.315728] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.323301] imx219 9-0010: board setup failed [ 1.351243] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.358872] imx219 10-0010: board setup failed [ 1.370145] FAN:gpio request failed [ 1.885887] cgroup: cgroup2: unknown option "nsdelegate" [ 2.243987] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): bad mac address at /chosen/nvidia,ethernet-mac: missing. [ 2.475085] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 2.481257] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 2.487382] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 2.493443] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 2.500523] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 2.507636] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 2.513726] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 2.519794] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 2.525865] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 2.531995] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 3.198905] using random self ethernet address [ 3.272282] using random host ethernet address [ 3.622513] random: crng init done [ 3.625923] random: 7 urandom warning(s) missed due to ratelimiting [ 3.660422] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 3.667416] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 3.675836] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 3.682184] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 3.688396] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 3.694615] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 3.700844] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 3.707070] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 3.713313] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 3.719584] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 4.102640] using random self ethernet address [ 4.112631] using random host ethernet address [ 4.334439] CPU1: shutdown [ 4.431950] CPU2: shutdown [ 4.852182] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 4.858771] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 4.865154] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 4.871531] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 4.877870] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 4.884233] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 4.890586] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 4.896945] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 4.903299] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 4.909724] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 5.317397] Bridge firewalling registered [ 5.972480] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 5.980024] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 5.986989] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 5.993906] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 6.000844] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 6.007791] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 6.014725] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 6.021668] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 6.028612] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 6.035628] mmc1: CMD CRC or end bit error, int mask 0x40000 Ubuntu 18.04.6 LTS tegra-ubuntu ttyS0 [END] 2022/6/20 15:48:14