[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (nvidia@nvidia-virtual-machine) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Nov 29 14:36:53 CST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb3000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefd1000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb3000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29388(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3562176K/4159488K available (15230K kernel code, 2914K rwdata, 6736K rodata, 8576K init, 609K bss, 122176K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff8009600000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a138808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a138808 - 0xffffff800a1d0dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001401] Console: colour dummy device 80x25 [ 0.001420] console [tty0] enabled [ 0.001438] kmemleak: Kernel memory leak detector disabled [ 0.001459] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001472] pid_max: default: 32768 minimum: 301 [ 0.001918] Security Framework initialized [ 0.002142] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002151] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003302] ftrace: allocating 46949 entries in 184 pages [ 0.174449] sched-energy: CPU device node has no sched-energy-costs [ 0.174484] ASID allocator initialised with 65536 entries [ 0.211508] tegra-id: chipid=22117. [ 0.211523] tegra-id: opt_subrevision=0. [ 0.211539] Tegra Speedo/IDDQ fuse revision 4 [ 0.211544] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211549] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.211554] Tegra: CPU Speedo Value 2079, SoC Speedo Value 1976, GPU Speedo Value 2070 [ 0.211558] Tegra: CPU IDDQ Value 2280, SoC IDDQ Value 2356, GPU IDDQ Value 2830 [ 0.211577] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.211590] DTS File Name: R32_2_1_Nano.dts [ 0.211598] DTB Build time: Dec 2 2019 13:24:32 [ 0.261088] CPU1: Booted secondary processor [411fd071] [ 0.293006] CPU2: Booted secondary processor [411fd071] [ 0.324996] CPU3: Booted secondary processor [411fd071] [ 0.325084] Brought up 4 CPUs [ 0.325091] SMP: Total of 4 processors activated. [ 0.325098] CPU features: detected feature: 32-bit EL0 Support [ 0.325362] CPU: All CPU(s) started at EL2 [ 0.325379] alternatives: patching kernel code [ 0.333669] devtmpfs: initialized [ 0.368028] Initilizing CustomIPI irq domain [ 0.368427] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.368448] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.379976] pinctrl core: initialized pinctrl subsystem [ 0.380671] OS set in device tree is not L4T. [ 0.381146] regulator-dummy: no parameters [ 0.381432] Initializing plugin-manager [ 0.381540] Plugin module not found [ 0.382502] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.385468] NET: Registered protocol family 16 [ 0.390381] pstore: using zlib compression [ 0.390419] console [pstore-1] enabled [ 0.390424] pstore: Registered ramoops as persistent store backend [ 0.390429] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405105] cpuidle: using governor menu [ 0.408909] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.410368] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e64000) [ 0.410392] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413639] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.415849] tegra_powergate_init: DONE [ 0.415864] DTS File Name: R32_2_1_Nano.dts [ 0.415872] DTB Build time: Dec 2 2019 13:24:32 [ 0.417324] Tegra reboot handler registered. [ 0.421674] iommu: Adding device tegra-carveouts to group 0 [ 0.421817] platform tegra-carveouts: domain=ffffffc0f9b383d8 allocates as[0]=ffffffc0f9bf00a8 [ 0.422189] iommu: Adding device smmu_test to group 1 [ 0.422241] platform smmu_test: domain=ffffffc0f9b38618 allocates as[0]=ffffffc0f9bf0110 [ 0.423038] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.423091] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.423147] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.423157] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.423179] mc-err: mcerr ops are set to t21x [ 0.432731] iommu: Adding device 70090000.xusb to group 2 [ 0.433078] iommu: Adding device 70006000.serial to group 3 [ 0.433152] platform 70006000.serial: domain=ffffffc0f9473618 allocates as[0]=ffffffc0f9bf0178 [ 0.433598] iommu: Adding device 70006040.serial to group 4 [ 0.433867] iommu: Adding device 70006200.serial to group 5 [ 0.434087] iommu: Adding device sound to group 6 [ 0.434134] platform sound: domain=ffffffc0f9473b58 allocates as[0]=ffffffc0f9bf01e0 [ 0.434683] iommu: Adding device 7000d400.spi to group 7 [ 0.434925] iommu: Adding device 7000d600.spi to group 8 [ 0.435260] iommu: Adding device 50000000.host1x to group 9 [ 0.435525] iommu: Adding device 54080000.vi to group 10 [ 0.435903] iommu: Adding device 54600000.isp to group 11 [ 0.436161] iommu: Adding device 54680000.isp to group 12 [ 0.436431] iommu: Adding device tegradc.0 to group 13 [ 0.436506] platform tegradc.0: domain=ffffffc0f9495918 allocates as[0]=ffffffc0f9bf0248 [ 0.440720] platform tegradc.0: IOVA linear map 0x0000000092cb3000(800000) [ 0.441234] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.441592] iommu: Adding device tegradc.1 to group 14 [ 0.441640] platform tegradc.1: domain=ffffffc0f9495b58 allocates as[0]=ffffffc0f9bf02b0 [ 0.445793] platform tegradc.1: IOVA linear map 0x0000000092cb3000(800000) [ 0.446184] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.446432] iommu: Adding device 54340000.vic to group 15 [ 0.446634] iommu: Adding device 544c0000.nvenc to group 16 [ 0.446833] iommu: Adding device 54500000.tsec to group 17 [ 0.447048] iommu: Adding device 54100000.tsecb to group 18 [ 0.447246] iommu: Adding device 54480000.nvdec to group 19 [ 0.447434] iommu: Adding device 54380000.nvjpg to group 20 [ 0.448499] iommu: Adding device 546c0000.i2c to group 21 [ 0.448838] iommu: Adding device 57000000.gpu to group 22 [ 0.448892] platform 57000000.gpu: domain=ffffffc0f94a3b58 allocates as[0]=ffffffc0f9bf0318 [ 0.448932] platform 57000000.gpu: domain=ffffffc0f94a3b58 allocates as[1]=ffffffc0f9bf0380 [ 0.448974] platform 57000000.gpu: domain=ffffffc0f94a3b58 allocates as[2]=ffffffc0f9bf03e8 [ 0.449042] platform 57000000.gpu: domain=ffffffc0f94a3b58 allocates as[3]=ffffffc0f9bf0450 [ 0.449967] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.449977] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.449989] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.449994] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.449998] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.501171] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.501179] tegra-pmc: Clear bootloader IO dpd settings [ 0.501199] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.501276] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.501586] iommu: Adding device 70012000.se to group 23 [ 0.502432] iommu: Adding device 7000c000.i2c to group 24 [ 0.502742] iommu: Adding device 7000c400.i2c to group 25 [ 0.503048] iommu: Adding device 7000c500.i2c to group 26 [ 0.503354] iommu: Adding device 7000c700.i2c to group 27 [ 0.503654] iommu: Adding device 7000d000.i2c to group 28 [ 0.503994] iommu: Adding device 7000d100.i2c to group 29 [ 0.504313] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.504371] platform sdhci-tegra.3: domain=ffffffc0f952fcd8 allocates as[0]=ffffffc0f9bf04b8 [ 0.504808] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.504853] platform sdhci-tegra.2: domain=ffffffc0f952ff18 allocates as[0]=ffffffc0f9bf0520 [ 0.505853] iommu: Adding device 700d0000.xudc to group 32 [ 0.510091] vdd-ac-bat: 5000 mV [ 0.510550] vdd-5v0-sys: 5000 mV [ 0.511786] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.511837] vdd-5v0-hdmi: 5000 mV [ 0.512342] vdd-1v8-sys: 1800 mV [ 0.512836] vdd-fan: supplied by vdd-5v0-sys [ 0.512876] vdd-fan: 5000 mV [ 0.513380] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.513415] vdd-usb-vbus: 5000 mV [ 0.514100] vdd-usb-vbus2: 5000 mV [ 0.542100] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.544626] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.545806] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.545845] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.546191] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.554969] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.555311] SCSI subsystem initialized [ 0.555538] libata version 3.00 loaded. [ 0.555897] usbcore: registered new interface driver usbfs [ 0.555945] usbcore: registered new interface driver hub [ 0.556019] usbcore: registered new device driver usb [ 0.559726] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.565227] vdd-core: 1000 <--> 1162 mV at 1075 mV [ 0.566071] random: fast init done [ 0.566080] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.569104] vdd-ddr-1v1: 1150 mV [ 0.573177] vdd-pre-reg-1v35: 1350 mV [ 0.577099] vdd-1v8: 1800 mV [ 0.581099] avdd-sys-1v2: 1200 mV [ 0.585100] vdd-pex-1v0: 1050 mV [ 0.585679] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.586157] max77620-ldo3: at 3100 mV [ 0.589101] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.589580] max77620-ldo5: at 3100 mV [ 0.593103] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 1800 mV [ 0.597100] avdd-1v05-pll: 1050 mV [ 0.601098] avdd-io-hdmi-dp: 1050 mV [ 0.602149] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.602425] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.603749] max77620 4-003c: max77620 probe successful [ 0.606559] media: Linux media interface: v0.10 [ 0.606616] Linux video capture interface: v2.00 [ 0.607540] pps_core: LinuxPPS API ver. 1 registered [ 0.607545] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.607565] PTP clock support registered [ 0.610907] tegra_fiq_debugger_init: found FIQ source (IRQ 98) [ 0.617124] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.617962] Advanced Linux Sound Architecture Driver Initialized. [ 0.618601] Bluetooth: Core ver 2.22 [ 0.618649] NET: Registered protocol family 31 [ 0.618653] Bluetooth: HCI device and connection manager initialized [ 0.618666] Bluetooth: HCI socket layer initialized [ 0.618675] Bluetooth: L2CAP socket layer initialized [ 0.618701] Bluetooth: SCO socket layer initialized [ 0.620427] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.620444] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.620494] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.620508] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.623143] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.624214] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.624301] vdd-3v3-sys: 3300 mV [ 0.624578] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.629164] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.629619] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.629653] vdd-3v3-sd: 3300 mV [ 0.630445] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.630489] avdd-io-edp-1v05: 1050 mV [ 0.630900] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.630935] vdd-usb-hub-en: 5000 mV [ 0.632359] camchar: rtcpu character device driver loaded [ 0.633116] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.634517] clocksource: Switched to clocksource arch_sys_counter [ 0.675519] VFS: Disk quotas dquot_6.6.0 [ 0.675642] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.676139] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.676564] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.676579] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.676815] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.676820] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.676832] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.676860] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.676865] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.676879] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.676887] nvmap_page_pool_init: Total RAM pages: 1009328 [ 0.676891] nvmap_page_pool_init: nvmap page pool size: 126166 pages (492 MB) [ 0.676986] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.677403] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.678195] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.687465] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.687847] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.688095] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.688302] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.688485] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.688767] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.688772] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB [ 0.689202] NET: Registered protocol family 2 [ 0.690270] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.690481] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.691059] TCP: Hash tables configured (established 32768 bind 32768) [ 0.691227] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691308] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691743] NET: Registered protocol family 1 [ 0.692508] RPC: Registered named UNIX socket transport module. [ 0.692514] RPC: Registered udp transport module. [ 0.692519] RPC: Registered tcp transport module. [ 0.692523] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.692538] PCI: CLS 0 bytes, default 64 [ 0.692796] Trying to unpack rootfs image as initramfs... [ 0.928805] Freeing initrd memory: 5432K [ 0.938451] host1x 50000000.host1x: initialized [ 0.940308] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.943528] audit: initializing netlink subsys (disabled) [ 0.943625] audit: type=2000 audit(0.791:1): initialized [ 0.944465] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.954493] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.956086] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.956884] 9p: Installing v9fs 9p2000 file system support [ 0.960260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.960406] io scheduler noop registered [ 0.960704] io scheduler cfq registered (default) [ 0.963416] gic 702f9000.agic: GIC IRQ controller registered [ 0.966343] iommu: Adding device 702ef000.adsp to group 33 [ 0.973183] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.973333] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.973914] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x69e6c0e [ 0.973921] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.976019] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.976125] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.976221] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.976414] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.976505] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.976590] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.976674] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.976761] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.976844] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.976931] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.982197] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.983807] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.985668] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.986962] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.987321] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.988486] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.988700] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 0.988940] Adding domain tsec-pd to PM domain host1x-pd [ 0.990885] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.991867] tsec 54500000.tsec: initialized [ 0.993371] tsec 54100000.tsecb: initialized [ 0.994033] Adding domain nvdec-pd to PM domain host1x-pd [ 0.997084] nvdec 54480000.nvdec: initialized [ 0.998098] Adding domain vic03-pd to PM domain host1x-pd [ 0.998273] Adding domain msenc-pd to PM domain host1x-pd [ 0.998426] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.002077] falcon 54340000.vic: initialized [ 1.003290] falcon 544c0000.nvenc: initialized [ 1.004558] falcon 54380000.nvjpg: initialized [ 1.008929] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.009058] display board info: id 0x0, fab 0x0 [ 1.009119] generic_infoframe_type: 0x87 [ 1.009248] tegradc tegradc.0: DT parsed successfully [ 1.009294] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.009829] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.013378] tegradc tegradc.0: probed [ 1.017544] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.022105] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels [ 1.022980] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.023303] kfuse 7000fc00.kfuse: initialized [ 1.024848] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.025848] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.027358] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.027375] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.027825] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.029077] vdd-gpu: applied init 1000000uV constraint [ 1.029082] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.029489] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.034422] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.034651] No Device Node present for smmu client: serial8250 !! [ 1.034667] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.034729] iommu: Adding device serial8250 to group 35 [ 1.038308] console [ttyS0] disabled [ 1.038450] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.038683] console [ttyS0] enabled [ 1.040002] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.040328] serial-tegra 70006200.serial: RX in PIO mode [ 1.040424] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.041359] [drm] Initialized [ 1.045850] Console: switching to colour frame buffer device 240x67 [ 1.045986] tegradc tegradc.0: fb registered [ 1.052689] brd: module loaded [ 1.055750] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.055819] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.056364] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.056379] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.058345] loop: module loaded [ 1.058459] tegra_profiler: version: 1.134, samples/io: 47/26 [ 1.058631] tegra_profiler: auth: init [ 1.059949] THERMAL EST: found 2 subdevs [ 1.059957] THERMAL EST num_resources: 0 [ 1.059963] [THERMAL EST subdev 0] [ 1.059972] [THERMAL EST subdev 1] [ 1.060432] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.060435] THERMAL EST: thz register success. [ 1.060632] THERMAL EST: end of probe, return err: 0 [ 1.061934] hisi_sas: driver version v1.6 [ 1.068658] libphy: Fixed MDIO Bus: probed [ 1.069302] tun: Universal TUN/TAP device driver, 1.6 [ 1.069307] tun: (C) 1999-2004 Max Krasnyansky [ 1.070311] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.070319] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.070370] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.070375] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.070428] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.070433] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.070482] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.070487] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.071783] PPP generic driver version 2.4.2 [ 1.071993] PPP BSD Compression module registered [ 1.071999] PPP Deflate Compression module registered [ 1.072045] PPP MPPE Compression module registered [ 1.072052] NET: Registered protocol family 24 [ 1.072132] usbcore: registered new interface driver r8152 [ 1.072180] usbcore: registered new interface driver asix [ 1.072231] usbcore: registered new interface driver ax88179_178a [ 1.072263] usbcore: registered new interface driver cdc_ether [ 1.072296] usbcore: registered new interface driver net1080 [ 1.072336] usbcore: registered new interface driver cdc_subset [ 1.072369] usbcore: registered new interface driver zaurus [ 1.072423] usbcore: registered new interface driver cdc_ncm [ 1.072607] VFIO - User Level meta-driver version: 0.3 [ 1.073935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.073962] ehci-pci: EHCI PCI platform driver [ 1.074016] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.074031] ohci-pci: OHCI PCI platform driver [ 1.074073] ohci-platform: OHCI generic platform driver [ 1.076950] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.077565] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.078788] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f962b400 id [ 1.081088] usbcore: registered new interface driver uas [ 1.081172] usbcore: registered new interface driver usb-storage [ 1.081302] usbcore: registered new interface driver usbserial [ 1.081731] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-05-08 09:42:10 UTC, Version: 50.22 release [ 1.081788] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.081812] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.082365] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.082371] Extcon AUX1(HDMI) enable [ 1.082798] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.082871] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.083193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.083201] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.083206] usb usb1: Product: xHCI Host Controller [ 1.083211] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.083216] usb usb1: SerialNumber: 70090000.xusb [ 1.083663] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.083759] tegradc tegradc.1: No lt-data, using default setting [ 1.083797] tegradc tegradc.1: No hpd-gpio in DT [ 1.083847] tegradc tegradc.1: DT parsed successfully [ 1.083872] hub 1-0:1.0: USB hub found [ 1.083912] tegradc tegradc.1: Display dc.ffffff800d500000 registered with id=1 [ 1.083938] hub 1-0:1.0: 5 ports detected [ 1.084730] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.084745] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.084835] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.084923] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.084930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.084934] usb usb2: Product: xHCI Host Controller [ 1.084938] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.084943] usb usb2: SerialNumber: 70090000.xusb [ 1.085569] hub 2-0:1.0: USB hub found [ 1.085609] hub 2-0:1.0: 4 ports detected [ 1.085674] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.095507] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.095924] tegradc tegradc.1: probed [ 1.097528] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.097577] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.097611] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.097673] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.097711] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.114641] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.116070] mousedev: PS/2 mouse device common for all mice [ 1.116359] usbcore: registered new interface driver xpad [ 1.123779] tegradc tegradc.1: fb registered [ 1.127026] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.127033] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.127043] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.127058] tegradc tegradc.1: blank - powerdown [ 1.127083] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.127087] Extcon DP: HPD disabled [ 1.127092] hpd: hpd_switch 0 [ 1.127096] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.127105] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.127112] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.186630] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.218142] tegradc tegradc.0: blank - powerdown [ 1.233735] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.236539] rtc rtc1: alarm rtc device [ 1.236559] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.236594] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.237291] i2c /dev entries driver [ 1.240220] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.243035] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.243041] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.243536] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.243554] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.243563] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.243697] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.243706] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.243713] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.243855] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.243865] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.243869] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.244078] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.244923] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.244977] tegra_aotag tegra-aotag: Invalid temp readout [ 1.245003] tegra_aotag tegra-aotag: Invalid temp readout [ 1.245020] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.245028] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.246019] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.246038] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.246231] tegra_aotag tegra-aotag: Invalid temp readout [ 1.246259] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.246706] parse_throttle_dt_data: Num cap clks = 6 [ 1.246711] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.246727] parse_throttle_dt_data: clk=gpu type=4 [ 1.246751] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.246774] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.246798] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.246801] parse_throttle_dt_data: clk=emc type=3 [ 1.247261] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.247367] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.247514] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.248272] FAN dev name: pwm-fan [ 1.248329] FAN:gpio request success. [ 1.248417] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.248729] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.248940] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.248949] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.249049] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.249053] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.249058] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.249062] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.249067] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.249071] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.249074] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.249078] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.249082] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.249086] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.250541] device-mapper: uevent: version 1.0.3 [ 1.251104] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.252308] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.252312] Extcon AUX1(HDMI) disable [ 1.256602] tegra210-cpufreq cpufreq: probe()...completed [ 1.257424] sdhci: Secure Digital Host Controller Interface driver [ 1.257425] sdhci: Copyright(c) Pierre Ossman [ 1.257427] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.257815] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.261202] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 1.265942] tegra-se 70012000.se: tegra_se_probe: complete [ 1.266455] hidraw: raw HID events driver (C) Jiri Kosina [ 1.267756] usbcore: registered new interface driver usbhid [ 1.267757] usbhid: USB HID core driver [ 1.269898] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.270066] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.271691] nvpmodel: initialized successfully [ 1.272768] usbcore: registered new interface driver snd-usb-audio [ 1.272838] No Device Node present for smmu client: snd-soc-dummy !! [ 1.272843] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.272860] iommu: Adding device snd-soc-dummy to group 36 [ 1.278234] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.280859] tegradc tegradc.0: unblank [ 1.288546] OPE platform probe [ 1.288634] OPE platform probe successful [ 1.288662] OPE platform probe [ 1.288742] OPE platform probe successful [ 1.298599] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.306610] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 1.314292] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.314430] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.314592] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.314741] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.314873] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.315003] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.315132] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.315264] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.315394] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.315527] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.322782] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.322843] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 1.323863] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 1.323870] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.327196] u32 classifier [ 1.327198] Actions configured [ 1.327271] Initializing XFRM netlink socket [ 1.328006] NET: Registered protocol family 10 [ 1.328716] NET: Registered protocol family 17 [ 1.328727] NET: Registered protocol family 15 [ 1.328803] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.328853] Bluetooth: RFCOMM socket layer initialized [ 1.328861] Bluetooth: RFCOMM ver 1.11 [ 1.328874] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.328878] Bluetooth: HIDP socket layer initialized [ 1.328896] 9pnet: Installing 9P2000 support [ 1.328935] Key type dns_resolver registered [ 1.329337] Registered cp15_barrier emulation handler [ 1.329344] Registered setend emulation handler [ 1.330434] registered taskstats version 1 [ 1.330961] Adding domain ve2-pd to PM domain host1x-pd [ 1.331211] Adding domain ve-pd to PM domain host1x-pd [ 1.333084] isp 54600000.isp: initialized [ 1.334043] isp 54680000.isp: initialized [ 1.344114] last reset is due to software reset [ 1.344117] KERNEL: PMC reset status reg: 0x3 [ 1.344192] BL: PMC reset status reg: 0x3 [ 1.344194] BL: PMIC poweroff Event Recorder: 0x0 [ 1.345612] clk_cbus_recalc_rate: no gbus parent [ 1.345616] clk_cbus_round_rate: no gbus parent [ 1.345618] clk_cbus_round_rate: no gbus parent [ 1.345626] clk_cbus_recalc_rate: no gbus parent [ 1.345661] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.345730] clk_cbus_recalc_rate: no gbus parent [ 1.345733] clk_cbus_round_rate: no gbus parent [ 1.345735] clk_cbus_round_rate: no gbus parent [ 1.345738] clk_cbus_recalc_rate: no gbus parent [ 1.346420] tegra_dvfs: GPU-cap: registered [ 1.346476] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.346478] tegra dvfs: vdd-core: nominal 1075mV, offset 1000000uV, step 12500uV, scaling enabled [ 1.346480] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.347806] tegra_dvfs: vdd-gpu-vts: registered [ 1.348323] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.348907] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.349412] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.350049] mmc1: new high speed SDXC card at address aaaa [ 1.350323] mmcblk1: mmc1:aaaa SC64G 59.5 GiB [ 1.350556] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.354858] mmcblk1: p1 [ 1.354923] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.358537] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.358540] Extcon AUX1(HDMI) enable [ 1.358917] tegradc tegradc.0: sync windows ret = 250 [ 1.359135] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.360198] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 1.367086] extcon-disp-state extcon:disp-state: cable 40 state 1 [ 1.367089] Extcon HDMI: HPD enabled [ 1.367105] tegradc tegradc.0: hdmi: plugged [ 1.379183] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 04:14:45 UTC (946700085) [ 1.380167] vi 54080000.vi: vi_probe: ++ [ 1.382684] vi 54080000.vi: initialized [ 1.384648] vi 54080000.vi: subdev nvcsi--1 bound [ 1.384913] mmcblk mmc1:aaaa: Card claimed for testing. [ 1.384923] mmcblk mmc0:0001: Card claimed for testing. [ 1.386048] Disable partitions left on by BL [ 1.386052] disb [ 1.386106] bwmgr: missing cdev-type property [ 1.386206] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.386213] DRAM derating cdev registered. [ 1.387258] vdd-fan: disabling [ 1.387262] vdd-usb-vbus: disabling [ 1.387264] vdd-usb-vbus2: disabling [ 1.387273] vddio-sdmmc-ap: disabling [ 1.387359] vdd-3v3-sd: disabling [ 1.387364] avdd-io-edp-1v05: disabling [ 1.387367] vdd-usb-hub-en: disabling [ 1.387452] ALSA device list: [ 1.387455] #0: tegra-hda at 0x70038000 irq 82 [ 1.387458] #1: tegra-snd-t210ref-mobile-rt565x [ 1.390652] Freeing unused kernel memory: 8576K [ 1.408835] L4T-INITRD Build DATE: Sat Jan 1 04:14:45 UTC 2000 [ 1.410544] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.413333] Root device found: mmcblk0p1 [ 1.414415] Found dev node: /dev/mmcblk0p1 [ 1.433481] EXT4-fs (mmcblk0p1): recovery complete [ 1.433489] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.434230] Rootfs mounted over mmcblk0p1 [ 1.434567] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.445885] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.445891] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.445895] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.445898] usb 1-2: Manufacturer: Generic [ 1.447730] hub 1-2:1.0: USB hub found [ 1.448865] hub 1-2:1.0: 4 ports detected [ 1.451024] Switching from initrd to actual rootfs [ 1.534203] systemd[1]: System time before build time, advancing clock. [ 1.548039] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.559655] cgroup: cgroup2: unknown option "nsdelegate" [ 1.576861] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.577599] systemd[1]: Detected architecture arm64. [ 1.601053] systemd[1]: Set hostname to . [ 1.662357] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.662367] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.742544] usb 1-2.1: new high-speed USB device number 3 using tegra-xusb [ 1.755632] random: systemd: uninitialized urandom read (16 bytes read) [ 1.755663] systemd[1]: Reached target User and Group Name Lookups. [ 1.755850] random: systemd: uninitialized urandom read (16 bytes read) [ 1.755871] systemd[1]: Reached target Swap. [ 1.755908] random: systemd: uninitialized urandom read (16 bytes read) [ 1.757556] systemd[1]: Created slice System Slice. [ 1.757852] systemd[1]: Listening on Journal Socket. [ 1.760154] systemd[1]: Mounting POSIX Message Queue File System... [ 1.765483] usb 1-2.1: New USB device found, idVendor=05e3, idProduct=0610 [ 1.765488] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.765492] usb 1-2.1: Product: USB2.1 Hub [ 1.765496] usb 1-2.1: Manufacturer: GenesysLogic [ 1.766732] hub 1-2.1:1.0: USB hub found [ 1.767026] hub 1-2.1:1.0: 4 ports detected [ 1.806930] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 1.848551] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.904935] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.081253] systemd-journald[1947]: Received request to flush runtime journal from PID 1 [ 2.086556] usb 1-2.1.4: new full-speed USB device number 4 using tegra-xusb [ 2.110942] usb 1-2.1.4: New USB device found, idVendor=046d, idProduct=c534 [ 2.110949] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.110953] usb 1-2.1.4: Product: USB Receiver [ 2.110956] usb 1-2.1.4: Manufacturer: Logitech [ 2.114356] input: Logitech USB Receiver as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/0003:046D:C534.0001/input/input2 [ 2.173237] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-70090000.xusb-2.1.4/input0 [ 2.176720] input: Logitech USB Receiver as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.1/0003:046D:C534.0002/input/input3 [ 2.235264] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-70090000.xusb-2.1.4/input1 [ 2.268895] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.270560] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.375949] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.375956] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.375960] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.375964] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.375968] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.375990] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.376054] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.376218] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.376329] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.376353] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.376384] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.376404] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.376532] pci 0000:01:00.0: supports D1 D2 [ 2.376536] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.386592] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.386627] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.386632] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.386640] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.386659] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.386675] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.386684] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.386688] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.386694] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.386952] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.386956] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.386961] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.387056] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.387231] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.387248] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.412163] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.412255] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e9:c7:c7 from device tree [ 2.412867] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.412885] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.542295] using random self ethernet address [ 2.547125] using random host ethernet address [ 2.666379] Mass Storage Function, version: 2009/09/11 [ 2.666385] LUN: removable file: (no medium) [ 2.694984] using random self ethernet address [ 2.699682] using random host ethernet address [ 2.799588] rndis0: HOST MAC ae:6b:0e:43:5e:6c [ 2.799826] rndis0: MAC ae:6b:0e:43:5e:6d [ 2.800489] usb0: HOST MAC ae:6b:0e:43:5e:6e [ 2.800685] usb0: MAC ae:6b:0e:43:5e:6f [ 2.800713] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 2.807758] l4tbr0: port 1(rndis0) entered blocking state [ 2.807763] l4tbr0: port 1(rndis0) entered disabled state [ 2.807930] device rndis0 entered promiscuous mode [ 2.825572] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 2.831059] l4tbr0: port 2(usb0) entered blocking state [ 2.831065] l4tbr0: port 2(usb0) entered disabled state [ 2.831235] device usb0 entered promiscuous mode [ 2.850661] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.054006] android_work: did not send uevent (0 0 (null)) [ 3.087009] android_work: sent uevent USB_STATE=CONNECTED [ 3.242167] random: crng init done [ 3.245605] random: 7 urandom warning(s) missed due to ratelimiting [ 3.355947] android_work: sent uevent USB_STATE=DISCONNECTED [ 3.388547] android_work: sent uevent USB_STATE=CONNECTED [ 3.443654] android_work: sent uevent USB_STATE=DISCONNECTED [ 3.487022] android_work: sent uevent USB_STATE=CONNECTED [ 3.684534] android_work: sent uevent USB_STATE=DISCONNECTED [ 3.684970] zram: Added device: zram0 [ 3.687392] zram: Added device: zram1 [ 3.690004] zram: Added device: zram2 [ 3.692878] zram: Added device: zram3 [ 3.717332] android_work: sent uevent USB_STATE=CONNECTED [ 3.731824] zram0: detected capacity change from 0 to 518569984 [ 3.772368] android_work: sent uevent USB_STATE=DISCONNECTED [ 3.797710] Adding 506412k swap on /dev/zram0. Priority:5 extents:1 across:506412k SS [ 3.802034] zram1: detected capacity change from 0 to 518569984 [ 3.813684] spidev: module is already loaded [ 3.815078] android_work: sent uevent USB_STATE=CONNECTED [ 3.821594] Adding 506412k swap on /dev/zram1. Priority:5 extents:1 across:506412k SS [ 3.828042] zram2: detected capacity change from 0 to 518569984 [ 3.851770] Adding 506412k swap on /dev/zram2. Priority:5 extents:1 across:506412k SS [ 3.867486] zram3: detected capacity change from 0 to 518569984 [ 3.883784] Adding 506412k swap on /dev/zram3. Priority:5 extents:1 across:506412k SS [ 3.995715] configfs-gadget gadget: high-speed config #1: c [ 3.995748] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 3.995765] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 3.995780] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 3.995870] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled [ 3.995886] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled [ 3.995901] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled [ 3.995935] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled [ 3.995953] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled [ 3.995975] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled [ 3.996002] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 3.996376] android_work: sent uevent USB_STATE=CONFIGURED [ 4.008226] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.008244] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.008360] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 4.847021] tegradc tegradc.0: blank - powerdown [ 4.904885] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.906039] eth0: 0xffffff800abfe000, 00:04:4b:e9:c7:c7, IRQ 405 [ 4.907467] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 4.907470] Extcon AUX1(HDMI) disable [ 4.928781] tegradc tegradc.0: unblank [ 4.941538] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 4.941627] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 4.942655] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 4.942663] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 4.977397] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 4.977399] Extcon AUX1(HDMI) enable [ 4.985551] tegradc tegradc.0: unblank [ 4.986786] tegradc tegradc.1: blank - powerdown [ 5.018442] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.246031] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 5.246038] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 5.571639] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 5.606092] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 5.606099] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.606103] usb 2-1: Product: 4-Port USB 3.1 Hub [ 5.606107] usb 2-1: Manufacturer: Generic [ 5.610999] hub 2-1:1.0: USB hub found [ 5.612418] hub 2-1:1.0: 4 ports detected [ 5.907113] usb 2-1.1: new SuperSpeed USB device number 3 using tegra-xusb [ 5.929884] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0626 [ 5.929890] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.929894] usb 2-1.1: Product: USB3.1 Hub [ 5.929898] usb 2-1.1: Manufacturer: GenesysLogic [ 5.931445] hub 2-1.1:1.0: USB hub found [ 5.931797] hub 2-1.1:1.0: 4 ports detected [ 6.058561] usb 2-1.1: usb_suspend_both: status 0 [ 6.106536] usb 2-1: usb_suspend_both: status 0 [ 6.106712] usb usb2: usb_suspend_both: status 0 [ 8.087053] r8168: eth0: link up [ 8.087101] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.336026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.336038] Bluetooth: BNEP socket layer initialized [ 8.362120] fuse init (API version 7.26) [ 9.056949] l4tbr0: port 2(usb0) entered blocking state [ 9.056955] l4tbr0: port 2(usb0) entered forwarding state [ 9.057028] l4tbr0: port 1(rndis0) entered blocking state [ 9.057032] l4tbr0: port 1(rndis0) entered forwarding state [ 9.060083] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 9.090563] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 12.111943] tegradc tegradc.0: unblank [ 12.111953] tegradc tegradc.1: blank - powerdown