[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@avermedia.com) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #2 SMP PREEMPT Mon Nov 21 12:51:54 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 380000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem2: 00800000@a06b2000 [ 0.000000] Found lut_mem2: 00002008@a06af000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 4128253 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 57344 pages used for memmap [ 0.000000] Normal zone: 3670016 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4063749 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem2=0x800000@0xa06b2000 lut_mem2=0x2008@0xa06af000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet pci=noaer root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29960(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 15427260K/16513012K available (15486K kernel code, 2990K rwdata, 6836K rodata, 8704K init, 623K bss, 332088K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008fa0000 ( 15488 KB) [ 0.000000] .rodata : 0xffffff8008fa0000 - 0xffffff8009660000 ( 6912 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ee0000 ( 8704 KB) [ 0.000000] .data : 0xffffff8009ee0000 - 0xffffff800a1cb808 ( 2991 KB) [ 0.000000] .bss : 0xffffff800a1cb808 - 0xffffff800a267734 ( 624 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf10000000 ( 256 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc400000000 ( 16384 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000791] Console: colour dummy device 80x25 [ 0.000802] console [tty0] enabled [ 0.000809] bootconsole [tegra_comb_uart0] disabled [ 0.000823] kmemleak: Kernel memory leak detector disabled [ 0.000841] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000856] pid_max: default: 32768 minimum: 301 [ 0.001973] Security Framework initialized [ 0.002581] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.002591] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004313] ftrace: allocating 47437 entries in 186 pages [ 0.407588] sched-energy: Sched-energy-costs installed from DT [ 0.407607] ASID allocator initialised with 65536 entries [ 0.443251] tegra-id: chipid=21917. [ 0.443263] tegra-id: opt_subrevision=1. [ 0.443290] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.443315] DTS File Name: /home/hungyu/workspace/NVIDIA/NX215B/Jetson_build_script/NX215B_output/bin/L4T/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/avt-p3668-0001-p2150-0000-nx215b.dtsi [ 0.443325] DTB Build time: Nov 21 2022 12:37:43 [ 0.491101] CPU1: Booted secondary processor [4e0f0040] [ 0.523258] CPU2: Booted secondary processor [4e0f0040] [ 0.555353] CPU3: Booted secondary processor [4e0f0040] [ 0.587633] CPU4: Booted secondary processor [4e0f0040] [ 0.619778] CPU5: Booted secondary processor [4e0f0040] [ 0.619970] Brought up 6 CPUs [ 0.619979] SMP: Total of 6 processors activated. [ 0.619988] CPU features: detected feature: Privileged Access Never [ 0.619995] CPU features: detected feature: LSE atomic instructions [ 0.620001] CPU features: detected feature: User Access Override [ 0.620008] CPU features: detected feature: 32-bit EL0 Support [ 0.621305] CPU: All CPU(s) started at EL2 [ 0.621352] alternatives: patching kernel code [ 0.628393] devtmpfs: initialized [ 0.671284] Initilizing CustomIPI irq domain [ 0.671529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.671543] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.682708] pinctrl core: initialized pinctrl subsystem [ 0.682935] OS set in device tree is not L4T. [ 0.683191] regulator-dummy: no parameters [ 0.683473] Initializing plugin-manager [ 0.683529] Plugin module not found [ 0.683565] Plugin-manager status disabled [ 0.685489] NET: Registered protocol family 16 [ 0.687009] pstore: using zlib compression [ 0.687033] console [pstore-1] enabled [ 0.687044] pstore: Registered ramoops as persistent store backend [ 0.687056] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.702058] cpuidle: using governor menu [ 0.703855] bpmp: waiting for handshake [ 0.703868] bpmp: handshake completed [ 0.703890] bpmp: synchronizing channels [ 0.703903] bpmp: channels synchronized [ 0.703915] bpmp: mail init ok [ 0.707312] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.707546] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.707553] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.707560] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.707567] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.707593] t19x-arm-smmu 12000000.iommu: nested translation [ 0.707602] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.707610] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.707618] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.707625] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.707648] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.712123] vdso: 2 pages (1 code @ ffffff8008fa7000, 1 data @ ffffff8009ee4000) [ 0.712153] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.714713] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.717630] tegra_aon_clk_init: ok [ 0.717645] Registering BPMP clocks... [ 0.717742] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.718667] Serial: AMBA PL011 UART driver [ 0.718809] tegra_powergate_init: DONE [ 0.718879] DTS File Name: /home/hungyu/workspace/NVIDIA/NX215B/Jetson_build_script/NX215B_output/bin/L4T/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/avt-p3668-0001-p2150-0000-nx215b.dtsi [ 0.718896] DTB Build time: Nov 21 2022 12:37:43 [ 0.722643] Tegra reboot handler registered. [ 0.732215] iommu: Adding device 14160000.pcie to group 0 [ 0.733023] iommu: Adding device 141a0000.pcie to group 1 [ 0.734868] iommu: Adding device 2490000.ether_qos to group 2 [ 0.735501] iommu: Adding device 3100000.serial to group 3 [ 0.736060] iommu: Adding device 3110000.serial to group 4 [ 0.736531] iommu: Adding device 3140000.serial to group 5 [ 0.737267] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.737806] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.737831] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.737856] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.737864] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.737921] tegra-pmc: PMC Prod config success [ 0.738130] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.738144] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.738567] iommu: Adding device 3460000.sdhci to group 6 [ 0.739197] iommu: Adding device 3440000.sdhci to group 7 [ 0.739794] iommu: Adding device 3400000.sdhci to group 8 [ 0.740366] iommu: Adding device 3210000.spi to group 9 [ 0.740809] iommu: Adding device 3230000.spi to group 10 [ 0.741266] iommu: Adding device 3270000.spi to group 11 [ 0.742672] iommu: Adding device 3160000.i2c to group 12 [ 0.743191] iommu: Adding device c240000.i2c to group 13 [ 0.743650] iommu: Adding device 3180000.i2c to group 14 [ 0.744187] iommu: Adding device 3190000.i2c to group 15 [ 0.744831] iommu: Adding device 31b0000.i2c to group 16 [ 0.745347] iommu: Adding device 31c0000.i2c to group 17 [ 0.745824] iommu: Adding device c250000.i2c to group 18 [ 0.746284] iommu: Adding device 31e0000.i2c to group 19 [ 0.746974] iommu: Adding device sound to group 20 [ 0.747704] iommu: Adding device 3510000.hda to group 21 [ 0.748323] iommu: Adding device bc00000.rtcpu to group 22 [ 0.750312] iommu: Adding device 13e10000.host1x to group 23 [ 0.750843] iommu: Adding device 13e10000.host1x:ctx0 to group 24 [ 0.751278] iommu: Adding device 13e10000.host1x:ctx1 to group 25 [ 0.751743] iommu: Adding device 13e10000.host1x:ctx2 to group 26 [ 0.752229] iommu: Adding device 13e10000.host1x:ctx3 to group 27 [ 0.752619] iommu: Adding device 13e10000.host1x:ctx4 to group 28 [ 0.753024] iommu: Adding device 13e10000.host1x:ctx5 to group 29 [ 0.753399] iommu: Adding device 13e10000.host1x:ctx6 to group 30 [ 0.753899] iommu: Adding device 13e10000.host1x:ctx7 to group 31 [ 0.754521] iommu: Adding device 15340000.vic to group 32 [ 0.755014] iommu: Adding device 15380000.nvjpg to group 33 [ 0.755343] iommu: Adding device 15500000.tsec to group 34 [ 0.755694] iommu: Adding device 15100000.tsecb to group 35 [ 0.756025] iommu: Adding device 15480000.nvdec to group 36 [ 0.756350] iommu: Adding device 15140000.nvdec1 to group 37 [ 0.756721] iommu: Adding device 154c0000.nvenc to group 38 [ 0.757083] iommu: Adding device 15a80000.nvenc1 to group 39 [ 0.757548] iommu: Adding device 15880000.nvdla0 to group 40 [ 0.758050] iommu: Adding device 158c0000.nvdla1 to group 41 [ 0.758793] iommu: Adding device 15200000.nvdisplay to group 42 [ 0.758987] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b2000(800000) [ 0.758998] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06af000(3000) [ 0.763678] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.763772] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.764394] iommu: Adding device 15210000.nvdisplay to group 43 [ 0.764483] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.766964] iommu: Adding device 15c10000.vi to group 44 [ 0.767140] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.767642] iommu: Adding device 14800000.isp to group 45 [ 0.768848] iommu: Adding device 16000000.pva0 to group 46 [ 0.769476] iommu: Adding device 16800000.pva1 to group 47 [ 0.769952] iommu: Adding device 15810000.se to group 48 [ 0.770406] iommu: Adding device 15820000.se to group 49 [ 0.770801] iommu: Adding device 15830000.se to group 50 [ 0.771161] iommu: Adding device 15840000.se to group 51 [ 0.771517] iommu: Adding device c1a0000.aon to group 52 [ 0.773496] iommu: Adding device d000000.bpmp to group 53 [ 0.773823] bpmp: ping status is 0 [ 0.773949] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.777133] bpmp d000000.bpmp: probe ok [ 0.779000] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.779568] iommu: Adding device smmu_test to group 54 [ 0.781125] mc: mapped MMIO address: 0xffffff800a640000 -> 0x2c10000 [ 0.781149] mc: mapped MMIO address: 0xffffff800a660000 -> 0x2c20000 [ 0.781193] mc: mapped MMIO address: 0xffffff800a680000 -> 0x2c30000 [ 0.781216] mc: mapped MMIO address: 0xffffff800a6a0000 -> 0x2c40000 [ 0.781238] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c50000 [ 0.781280] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2b80000 [ 0.781303] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2b90000 [ 0.781325] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2ba0000 [ 0.781347] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2bb0000 [ 0.781390] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1700000 [ 0.781420] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1710000 [ 0.781442] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1720000 [ 0.781487] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1730000 [ 0.781509] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1740000 [ 0.781531] mc: mapped MMIO address: 0xffffff800b1d0000 -> 0x1750000 [ 0.781552] mc: mapped MMIO address: 0xffffff800b1f0000 -> 0x1760000 [ 0.781576] mc: mapped MMIO address: 0xffffff800b210000 -> 0x1770000 [ 0.781658] mc-err: mcerr ops are set to t19x [ 0.788942] iommu: Adding device 2600000.dma to group 55 [ 0.794699] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.795861] GPIO line 339 (wifi-enable) hogged as output/high [ 0.795904] GPIO line 421 (usb3-enable) hogged as output/high [ 0.795944] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.795981] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.796308] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.804760] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.804830] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.804867] GPIO line 266 (w-disable1) hogged as output/high [ 0.804927] GPIO line 264 (w-disable2) hogged as output/high [ 0.804961] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.804994] GPIO line 268 (usb-to-rj45) hogged as output/high [ 0.805289] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.808199] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.808211] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.808222] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.809812] iommu: Adding device 3550000.xudc to group 56 [ 0.810515] iommu: Adding device 3610000.xhci to group 57 [ 0.812745] arm64_ras arm64_ras: probed [ 0.813168] ras_fhi_enable: FHI 470 enabled on CPU0 [ 0.813241] ras_fhi_enable: FHI 471 enabled on CPU1 [ 0.813313] ras_fhi_enable: FHI 472 enabled on CPU2 [ 0.813381] ras_fhi_enable: FHI 473 enabled on CPU3 [ 0.813457] ras_fhi_enable: FHI 474 enabled on CPU4 [ 0.813523] ras_fhi_enable: FHI 475 enabled on CPU5 [ 0.813707] carmel_ras_enable: RAS enabled on cpu0 [ 0.813876] carmel_ras_enable: RAS enabled on cpu1 [ 0.814059] carmel_ras_enable: RAS enabled on cpu2 [ 0.814254] carmel_ras_enable: RAS enabled on cpu3 [ 0.814459] carmel_ras_enable: RAS enabled on cpu4 [ 0.814650] carmel_ras_enable: RAS enabled on cpu5 [ 0.814711] carmel_ras carmel_ras: probed [ 0.815970] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.816492] tegra-cbb c600000.aon-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.817483] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.818472] tegra-cbb be00000.rce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.819729] tegra-cbb b600000.sce-noc: noc_secure_irq = 487, noc_nonsecure_irq = 486> [ 0.820260] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.821724] vdd-ac-bat: 5000 mV [ 0.822171] vdd-sdmmc1-sw: 3300 mV [ 0.822491] vdd-1v8-sd: 1800 mV [ 0.822836] vdd-3v3-cvb: 3300 mV [ 0.823228] vdd-1v8-cvb: 1800 mV [ 0.823632] vdd-epb-1v0: 1000 mV [ 0.823824] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.824115] avdd-cam-2v8: 2800 mV [ 0.824474] vdd-fan: 5000 mV [ 0.824798] vdd-hdmi-5v0: 5000 mV [ 0.825102] vdd_sys_en: 1200 mV [ 0.856445] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.861290] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.861652] SCSI subsystem initialized [ 0.861904] libata version 3.00 loaded. [ 0.862131] usbcore: registered new interface driver usbfs [ 0.862178] usbcore: registered new interface driver hub [ 0.862219] usbcore: registered new device driver usb [ 0.873323] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.876365] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 0.887300] vdd-1v0: at 1000 mV [ 0.892085] vdd-1v8-hs: at 1800 mV [ 0.896100] vdd-1v8-ls: at 1800 mV [ 0.900126] vdd-1v8-ao: at 1800 mV [ 0.904109] vddio-ddr-1v1: at 1100 mV [ 0.907904] vdd-rtc: at 800 mV [ 0.908909] spmic-ldo1: at 2375 mV [ 0.915949] vdd-ao-3v3: at 3300 mV [ 0.923990] vddio-emmc-3v3: at 3300 mV [ 0.925136] spmic-ldo4: at 1587 mV [ 0.932072] vdd-usb-3v3: at 3300 mV [ 0.940083] vddio-sdmmc1-3v3: at 3300 mV [ 0.944110] vdd-csi-1v2: at 1200 mV [ 0.945161] spmic-ldo8: at 1800 mV [ 0.949279] GPIO line 246 (gpio_default) hogged as output/high [ 0.950274] GPIO line 247 (gpio_default) hogged as output/high [ 0.950558] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.950897] max77620 4-003c: max77620 probe successful [ 0.951536] media: Linux media interface: v0.10 [ 0.951582] Linux video capture interface: v2.00 [ 0.953113] pps_core: LinuxPPS API ver. 1 registered [ 0.953120] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.953138] PTP clock support registered [ 0.953460] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.953758] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.953789] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.956596] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.956659] trusty trusty: selected api version: 3 (requested 3) [ 0.957885] Advanced Linux Sound Architecture Driver Initialized. [ 0.958396] Bluetooth: Core ver 2.22 [ 0.958435] NET: Registered protocol family 31 [ 0.958440] Bluetooth: HCI device and connection manager initialized [ 0.958451] Bluetooth: HCI socket layer initialized [ 0.958460] Bluetooth: L2CAP socket layer initialized [ 0.958486] Bluetooth: SCO socket layer initialized [ 0.960913] camchar: rtcpu character device driver loaded [ 0.961380] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.961496] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.963634] clocksource: Switched to clocksource arch_sys_counter [ 1.010075] VFS: Disk quotas dquot_6.6.0 [ 1.010189] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.010512] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.011940] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.011995] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.012269] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.012277] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.012299] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.012307] nvmap_page_pool_init: Total RAM pages: 4045231 [ 1.012313] nvmap_page_pool_init: nvmap page pool size: 505653 pages (1975 MB) [ 1.012521] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.013163] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.014714] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.027870] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.028092] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.028297] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.028462] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.028629] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.029786] la/ptsa driver initialized. [ 1.030104] NET: Registered protocol family 2 [ 1.030930] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.031642] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.032234] TCP: Hash tables configured (established 131072 bind 65536) [ 1.032279] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.032506] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.033030] NET: Registered protocol family 1 [ 1.033512] RPC: Registered named UNIX socket transport module. [ 1.033518] RPC: Registered udp transport module. [ 1.033523] RPC: Registered tcp transport module. [ 1.033528] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.033538] PCI: CLS 0 bytes, default 64 [ 1.033787] Trying to unpack rootfs image as initramfs... [ 1.260923] Freeing initrd memory: 7068K [ 1.281997] host1x 13e10000.host1x: initialized [ 1.283792] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.288664] audit: initializing netlink subsys (disabled) [ 1.288704] audit: type=2000 audit(0.904:1): initialized [ 1.289377] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.299463] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.301164] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.302136] 9p: Installing v9fs 9p2000 file system support [ 1.307851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.308013] io scheduler noop registered [ 1.308260] io scheduler cfq registered (default) [ 1.311800] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.312924] random: fast init done [ 1.346277] iommu: Adding device 2993000.adsp to group 58 [ 1.456531] iommu: Adding device aconnect@2a41000:adsp_audio to group 59 [ 1.457622] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.470469] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.470884] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.471417] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.471849] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.472237] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.475345] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.475698] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.478646] tsec 15500000.tsec: initialized [ 1.480363] tsec 15100000.tsecb: initialized [ 1.483968] nvdec 15480000.nvdec: initialized [ 1.486654] nvdec 15140000.nvdec1: initialized [ 1.492282] falcon 15340000.vic: initialized [ 1.493967] falcon 15380000.nvjpg: initialized [ 1.495863] falcon 154c0000.nvenc: initialized [ 1.497766] falcon 15a80000.nvenc1: initialized [ 1.501532] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.503114] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.504567] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.506014] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.507477] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.509054] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.510512] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.511907] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.515519] t194-nvcsi 15a00000.nvcsi: initialized [ 1.520925] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.521295] scare-pigeon 14b00000.isp-thi: initialized [ 1.526808] pva 16000000.pva0: initialized [ 1.532274] pva 16800000.pva1: initialized [ 1.537372] nvdla 15880000.nvdla0: initialized [ 1.542009] nvdla 158c0000.nvdla1: initialized [ 1.543249] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.543265] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.543320] tegradccommon 15200000.dc_common: dma mapping done [ 1.544121] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.544160] generic_infoframe_type: 0x87 [ 1.544221] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.544259] tegradc 15200000.nvdisplay: Display dc.ffffff800bd60000 registered with id=0 [ 1.547832] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.547840] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.547847] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.548046] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.548056] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.550933] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.550943] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.554374] tegradc 15200000.nvdisplay: probed [ 1.554943] Console: switching to colour frame buffer device 80x30 [ 1.554972] tegradc 15200000.nvdisplay: fb registered [ 1.555232] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.555453] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=79 [ 1.555463] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.555735] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.555894] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.556065] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.556074] tegra_cec 3960000.tegra_cec: probed [ 1.556787] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.556833] generic_infoframe_type: 0x87 [ 1.556979] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.557030] tegradc 15210000.nvdisplay: Display dc.ffffff800be50000 registered with id=1 [ 1.557265] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.557275] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.558116] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350878 [ 1.560721] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.560731] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.562839] tegradc 15210000.nvdisplay: probed [ 1.567177] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.568194] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.568205] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.568522] kfuse 3830000.kfuse: initialized [ 1.573651] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.576593] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.578065] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.579092] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.580814] console [ttyTCU0] enabled [ 1.581336] [drm] Initialized [ 1.595198] brd: module loaded [ 1.600934] loop: module loaded [ 1.600998] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.601140] tegra_profiler: auth: init [ 1.601718] THERMAL EST: found 3 subdevs [ 1.601725] THERMAL EST num_resources: 0 [ 1.601732] [THERMAL EST subdev 0] [ 1.601739] [THERMAL EST subdev 1] [ 1.601751] [THERMAL EST subdev 2] [ 1.601824] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.602203] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.602208] THERMAL EST: thz register success. [ 1.602378] THERMAL EST: end of probe, return err: 0 [ 1.603042] sd: No Scsi addr parsed to reserve index [ 1.603094] hisi_sas: driver version v1.6 [ 1.612550] tegradc 15210000.nvdisplay: fb registered [ 1.612874] gpio tegra-gpio wake60 for gpio=96(M:0) [ 1.613349] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.613360] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.613373] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.613718] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.613751] 1 ofpart partitions found on MTD device spi6.0 [ 1.613759] Creating 1 MTD partitions on "spi6.0": [ 1.613777] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.613809] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.613879] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.615899] Parent Clock set for DC pll_d [ 1.617320] libphy: Fixed MDIO Bus: probed [ 1.618032] tun: Universal TUN/TAP device driver, 1.6 [ 1.618038] tun: (C) 1999-2004 Max Krasnyansky [ 1.618955] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.618961] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.619006] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.619011] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.619060] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.619065] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.619117] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.619122] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.679152] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.679791] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.679806] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.706754] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 1.706761] Extcon AUX0(HDMI) enable [ 1.840000] tegradc 15210000.nvdisplay: blank - powerdown [ 1.862515] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.863137] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 76 4e ee [ 1.863166] Using phyrst_lpmode = 1 from DT [ 1.863321] libphy: dwc_phy: probed [ 1.865799] PPP generic driver version 2.4.2 [ 1.866222] PPP BSD Compression module registered [ 1.866228] PPP Deflate Compression module registered [ 1.866244] PPP MPPE Compression module registered [ 1.866249] NET: Registered protocol family 24 [ 1.866307] usbcore: registered new interface driver r8152 [ 1.866361] usbcore: registered new interface driver asix [ 1.866394] usbcore: registered new interface driver cdc_ether [ 1.866423] usbcore: registered new interface driver net1080 [ 1.866453] usbcore: registered new interface driver cdc_subset [ 1.866482] usbcore: registered new interface driver zaurus [ 1.866526] usbcore: registered new interface driver cdc_ncm [ 1.866756] VFIO - User Level meta-driver version: 0.3 [ 1.867923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.867941] ehci-pci: EHCI PCI platform driver [ 1.867974] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.867997] ohci-pci: OHCI PCI platform driver [ 1.868058] ohci-platform: OHCI generic platform driver [ 1.872933] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.875005] tegra-xusb 3610000.xhci: extcon 0: ffffffc3ec032800 id [ 1.875510] usbcore: registered new interface driver uas [ 1.875596] usbcore: registered new interface driver usb-storage [ 1.875709] usbcore: registered new interface driver usbserial [ 1.877761] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.877795] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.877818] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.878524] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.878590] tegra-xusb 3610000.xhci: irq 465, io mem 0x03610000 [ 1.878836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.878842] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.878847] usb usb1: Product: xHCI Host Controller [ 1.878853] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.878858] usb usb1: SerialNumber: 3610000.xhci [ 1.879413] hub 1-0:1.0: USB hub found [ 1.879464] hub 1-0:1.0: 4 ports detected [ 1.879519] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 1.879523] Extcon AUX0(HDMI) disable [ 1.880046] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.880057] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.880067] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.880280] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.880311] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.880316] usb usb2: Product: xHCI Host Controller [ 1.880321] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.880326] usb usb2: SerialNumber: 3610000.xhci [ 1.880837] hub 2-0:1.0: USB hub found [ 1.880923] hub 2-0:1.0: 4 ports detected [ 1.881076] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.881150] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.881725] Wake76 for irq=199 [ 1.881729] Wake77 for irq=199 [ 1.881732] Wake78 for irq=199 [ 1.881735] Wake79 for irq=199 [ 1.881738] Wake80 for irq=199 [ 1.881740] Wake81 for irq=199 [ 1.881742] Wake82 for irq=199 [ 1.881784] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.881792] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.882154] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.882175] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.882390] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.882399] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.883071] mousedev: PS/2 mouse device common for all mice [ 1.883151] usbcore: registered new interface driver xpad [ 1.905423] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.905620] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.906707] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.907234] tegradc 15210000.nvdisplay: unblank [ 1.908628] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.908864] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.909050] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.916219] Parent Clock set for DC pll_d [ 1.920524] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.921895] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.957935] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 1.957939] Extcon AUX0(HDMI) enable [ 1.972073] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 1.972121] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 1.972127] Extcon HDMI: HPD enabled [ 1.972155] tegradc 15210000.nvdisplay: hdmi: plugged [ 1.983999] usb usb2: usb_suspend_both: status 0 [ 2.002072] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.003472] Wake73 for irq=42 [ 2.004856] rtc rtc1: alarm rtc device [ 2.004873] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.004900] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.005111] i2c /dev entries driver [ 2.007465] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.007930] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.007939] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.008537] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.031932] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.031987] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.032297] imx219 9-0010: board setup failed [ 2.032488] imx219: probe of 9-0010 failed with error -121 [ 2.032978] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.056257] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.056333] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.056612] imx219 10-0010: board setup failed [ 2.056789] imx219: probe of 10-0010 failed with error -121 [ 2.058282] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.064974] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.065369] FAN dev name: pwm-fan [ 2.065439] FAN:gpio request success. [ 2.065497] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.065530] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.065777] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.065943] gpio tegra-gpio wake4 for gpio=105(N:1) [ 2.066017] pwm_fan_driver pwm-fan: fan tach request irq success [ 2.066029] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.066558] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.066566] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.066573] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.066579] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.066585] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.066592] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.066598] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.066604] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.066611] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.066618] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.068074] device-mapper: uevent: version 1.0.3 [ 2.068548] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.072596] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.073719] cpuidle: Initializing cpuidle driver [ 2.074530] sdhci: Secure Digital Host Controller Interface driver [ 2.074535] sdhci: Copyright(c) Pierre Ossman [ 2.074538] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.075501] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.077459] CMDQ: cmdq_platfm_init successful [ 2.078044] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 2.080069] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 2.082210] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 322 [ 2.083752] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.084577] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.086348] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 247 [ 2.091039] tegra-se-nvhost 15810000.se: initialized [ 2.092609] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.093749] tegra-se-nvhost 15820000.se: initialized [ 2.094761] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.096123] tegra-se-nvhost 15830000.se: initialized [ 2.096713] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.097716] tegra-se-nvhost 15840000.se: initialized [ 2.098667] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.099751] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.099884] hidraw: raw HID events driver (C) Jiri Kosina [ 2.101298] usbcore: registered new interface driver usbhid [ 2.101302] usbhid: USB HID core driver [ 2.105209] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.106218] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.106614] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.107186] denver_knobs_init:MTS_VERSION:53250041 [ 2.107482] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.108396] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.108818] t19x_cache tegra-cache: probed [ 2.111010] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.111021] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.111705] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.112140] PLL_AON clock registered [ 2.113838] Clocks initialized successfully [ 2.115114] nvpmodel: initialized successfully [ 2.116306] trusty-virtio trusty:virtio: initializing [ 2.116518] trusty_ipc virtio0: vring0: va(pa) ffffffc3d8480000(0) qsz 32 notifyid 1 [ 2.116527] trusty_ipc virtio0: vring1: va(pa) ffffffc3d8482000(0) qsz 32 notifyid 2 [ 2.116689] trusty-virtio trusty:virtio: initializing done [ 2.116951] trusty_ipc virtio0: is online [ 2.117408] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.117787] usbcore: registered new interface driver snd-usb-audio [ 2.131606] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.131806] gpio tegra-gpio wake51 for gpio=130(Q:2) [ 2.131862] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.135730] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.135789] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.141562] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.141893] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.142129] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.142415] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.181583] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.195621] mmc0: periodic cache flush enabled [ 2.195637] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.196218] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.196415] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.196606] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.196799] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.200336] OPE platform probe [ 2.200456] OPE platform probe successful [ 2.202154] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.211630] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.248255] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 2.248262] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.248267] usb 1-2: Product: 4-Port USB 2.1 Hub [ 2.248271] usb 1-2: Manufacturer: Generic [ 2.250520] hub 1-2:1.0: USB hub found [ 2.251657] hub 1-2:1.0: 4 ports detected [ 2.273209] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.273337] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.273474] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.273620] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.273753] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.273894] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.274017] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.274135] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.274262] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.274382] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.274517] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.274637] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.274771] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.274880] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.274976] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.275087] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.275177] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.275267] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.275353] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.275443] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.303078] u32 classifier [ 2.303083] Actions configured [ 2.303155] Initializing XFRM netlink socket [ 2.303883] NET: Registered protocol family 10 [ 2.304656] NET: Registered protocol family 17 [ 2.304671] NET: Registered protocol family 15 [ 2.304742] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.304829] Bluetooth: RFCOMM socket layer initialized [ 2.304846] Bluetooth: RFCOMM ver 1.11 [ 2.304889] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.304896] Bluetooth: HIDP socket layer initialized [ 2.304913] 9pnet: Installing 9P2000 support [ 2.304952] Key type dns_resolver registered [ 2.305219] Registered cp15_barrier emulation handler [ 2.305230] Registered setend emulation handler [ 2.306842] registered taskstats version 1 [ 2.307124] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.308521] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.308547] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.308575] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.308581] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.356459] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.393154] usb 2-3: New USB device found, idVendor=0bda, idProduct=0411 [ 2.393161] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.393166] usb 2-3: Product: 4-Port USB 3.1 Hub [ 2.393170] usb 2-3: Manufacturer: Generic [ 2.403196] hub 2-3:1.0: USB hub found [ 2.404695] hub 2-3:1.0: 4 ports detected [ 2.539620] usb 1-2.4: new full-speed USB device number 3 using tegra-xusb [ 2.559622] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.561470] usb 1-2.4: New USB device found, idVendor=0a05, idProduct=7211 [ 2.561477] usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.561481] usb 1-2.4: Product: USB2.0 HUB [ 2.562293] hub 1-2.4:1.0: USB hub found [ 2.562455] hub 1-2.4:1.0: 4 ports detected [ 2.624151] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.624157] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.696143] usb 2-3.1: new SuperSpeed USB device number 3 using tegra-xusb [ 2.699625] usb 1-2.4: usb_suspend_both: status 0 [ 2.722376] usb 2-3.1: New USB device found, idVendor=0b95, idProduct=1790 [ 2.722383] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.722387] usb 2-3.1: Product: AX88179 [ 2.722392] usb 2-3.1: Manufacturer: ASIX Elec. Corp. [ 2.722396] usb 2-3.1: SerialNumber: 00000000000001 [ 2.739637] usb 1-2: usb_suspend_both: status 0 [ 2.823726] tegra-pcie-dw 14160000.pcie: link is down [ 2.823861] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.823870] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.823879] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.823885] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.823890] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.823919] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.824119] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.824358] iommu: Adding device 0004:00:00.0 to group 60 [ 2.824558] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.824581] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.824775] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.824782] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.824929] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.825008] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.825075] iommu: Removing device 0004:00:00.0 from group 60 [ 2.825098] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.826626] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.827403] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.827623] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.827633] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.936117] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.936149] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.936160] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.936167] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.999616] usb 1-2.4.2: new full-speed USB device number 4 using tegra-xusb [ 3.020073] usb 1-2.4.2: not running at top speed; connect to a high speed hub [ 3.021261] usb 1-2.4.2: New USB device found, idVendor=0411, idProduct=01dc [ 3.021266] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.021271] usb 1-2.4.2: Product: Optical Drive [ 3.021275] usb 1-2.4.2: Manufacturer: BUFFALO [ 3.021279] usb 1-2.4.2: SerialNumber: 303042333832343035393534 [ 3.022090] usb-storage 1-2.4.2:1.0: USB Mass Storage device detected [ 3.022386] scsi host0: usb-storage 1-2.4.2:1.0 [ 3.099653] usb 1-2.4.3: new full-speed USB device number 5 using tegra-xusb [ 3.122809] usb 1-2.4.3: New USB device found, idVendor=046d, idProduct=c52e [ 3.122817] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.122821] usb 1-2.4.3: Product: USB Receiver [ 3.122825] usb 1-2.4.3: Manufacturer: Logitech [ 3.125494] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:046D:C52E.0001/input/input4 [ 3.184225] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-2.4.3/input0 [ 3.187135] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.1/0003:046D:C52E.0002/input/input5 [ 3.243920] hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-2.4.3/input1 [ 3.323611] usb 1-2.4.4: new full-speed USB device number 6 using tegra-xusb [ 3.346937] usb 1-2.4.4: New USB device found, idVendor=046d, idProduct=c534 [ 3.346943] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.346948] usb 1-2.4.4: Product: USB Receiver [ 3.346952] usb 1-2.4.4: Manufacturer: Logitech [ 3.349603] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4.4/1-2.4.4:1.0/0003:046D:C534.0003/input/input6 [ 3.408280] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3610000.xhci-2.4.4/input0 [ 3.411215] input: Logitech USB Receiver as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4.4/1-2.4.4:1.1/0003:046D:C534.0004/input/input7 [ 3.449622] tegra-pcie-dw 141a0000.pcie: link is down [ 3.449759] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.449767] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.449775] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.449781] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.449787] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.449826] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.450080] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.450307] iommu: Adding device 0005:00:00.0 to group 60 [ 3.450515] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.450537] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.450718] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.450725] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.450901] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.451014] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.451121] iommu: Removing device 0005:00:00.0 from group 60 [ 3.451145] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.453105] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.463314] tegra-cbb 14040000.cv-noc: noc_secure_irq = 91, noc_nonsecure_irq = 90> [ 3.467897] hid-generic 0003:046D:C534.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3610000.xhci-2.4.4/input1 [ 3.469385] tegra194-isp5 14800000.isp: initialized [ 3.476214] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.482314] tegra194-vi5 15c10000.vi: initialized [ 3.486837] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.486906] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.487109] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.491712] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.491731] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.491736] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.491819] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.491862] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.491867] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.496041] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.496086] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.496091] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.496428] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.496469] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.496475] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.496962] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.497015] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.497019] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.497292] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.498022] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.578134] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.578485] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.578734] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.578943] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.579330] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.579472] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.579695] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (67) [ 3.579700] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.580813] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.581351] Wake83 for irq=211 [ 3.581419] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.581516] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.581682] input: gpio-keys as /devices/gpio-keys/input/input8 [ 3.612675] tegra_rtc c2a0000.rtc: setting system clock to 2022-12-10 09:08:49 UTC (1670663329) [ 3.613274] mmcblk mmc0:0001: Card claimed for testing. [ 3.651659] bpmp: mounted debugfs mirror [ 3.658089] ALSA device list: [ 3.658095] #0: tegra-hda-xnx at 0x3518000 irq 66 [ 3.658099] #1: jetson-xaviernx-ape [ 3.660676] Freeing unused kernel memory: 8704K [ 3.699222] Root device found: mmcblk0p1 [ 3.701127] Found dev node: /dev/mmcblk0p1 [ 3.725761] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.728441] Rootfs mounted over mmcblk0p1 [ 3.751734] Switching from initrd to actual rootfs [ 3.871821] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.882376] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.882993] systemd[1]: Detected architecture arm64. [ 3.890981] systemd[1]: Set hostname to . [ 3.969766] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.969778] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.042518] scsi 0:0:0:0: CD-ROM BUFFALO Optical Drive 2.00 PQ: 0 ANSI: 0 [ 4.065002] sr 0:0:0:0: [sr0] scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.065011] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.065442] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 4.117208] random: systemd: uninitialized urandom read (16 bytes read) [ 4.117665] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.117807] random: systemd: uninitialized urandom read (16 bytes read) [ 4.117830] systemd[1]: Reached target Swap. [ 4.117898] random: systemd: uninitialized urandom read (16 bytes read) [ 4.120717] systemd[1]: Created slice System Slice. [ 4.121015] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.121241] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.150781] usbcore: registered new interface driver btusb [ 4.167178] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.217467] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.487549] systemd-journald[2476]: Received request to flush runtime journal from PID 1 [ 5.325920] random: crng init done [ 5.326040] random: 7 urandom warning(s) missed due to ratelimiting [ 5.527427] using random self ethernet address [ 5.527557] using random host ethernet address [ 5.619279] cpu-throttle-alert cooling device registered. [ 5.659741] gpu-throttle-alert cooling device registered. [ 5.664259] aux-throttle-alert cooling device registered. [ 6.181951] Mass Storage Function, version: 2009/09/11 [ 6.181962] LUN: removable file: (no medium) [ 6.206300] using random self ethernet address [ 6.206439] using random host ethernet address [ 6.242734] rndis0: HOST MAC 9a:a6:aa:25:70:88 [ 6.242821] rndis0: MAC 9a:a6:aa:25:70:89 [ 6.244190] usb0: HOST MAC 9a:a6:aa:25:70:8a [ 6.244229] usb0: MAC 9a:a6:aa:25:70:8b [ 6.244259] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.252269] l4tbr0: port 1(rndis0) entered blocking state [ 6.252276] l4tbr0: port 1(rndis0) entered disabled state [ 6.252452] device rndis0 entered promiscuous mode [ 6.261946] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.279744] l4tbr0: port 2(usb0) entered blocking state [ 6.279752] l4tbr0: port 2(usb0) entered disabled state [ 6.280368] device usb0 entered promiscuous mode [ 6.287247] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.294326] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.445681] android_work: did not send uevent (0 0 (null)) [ 6.516415] android_work: sent uevent USB_STATE=CONNECTED [ 6.568190] ras_fhi_disable: FHI 474 disabled [ 6.571542] CPU4: shutdown [ 6.571707] psci: CPU4 killed (polled 0 ms) [ 6.573780] android_work: sent uevent USB_STATE=DISCONNECTED [ 6.608436] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.613154] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.640222] ras_fhi_disable: FHI 475 disabled [ 6.655615] CPU5: shutdown [ 6.655730] psci: CPU5 killed (polled 0 ms) [ 6.657522] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.664394] android_work: sent uevent USB_STATE=CONNECTED [ 6.670989] configfs-gadget gadget: high-speed config #1: c [ 6.671017] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 6.671030] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 6.671042] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 6.671119] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 6.671131] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 6.671142] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 6.671168] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 6.671245] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 6.671401] android_work: sent uevent USB_STATE=CONFIGURED [ 6.671445] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 6.671456] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 6.678553] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 6.678571] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 6.678693] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 6.679465] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 6.679579] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 6.696749] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 6.696764] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 6.766702] ax88179_178a: loading out-of-tree module taints kernel. [ 6.911808] zram: Added device: zram0 [ 6.913853] zram: Added device: zram1 [ 6.915613] zram: Added device: zram2 [ 6.921681] zram: Added device: zram3 [ 6.945949] zram0: detected capacity change from 0 to 2073178112 [ 6.973540] Adding 2024584k swap on /dev/zram0. Priority:5 extents:1 across:2024584k SS [ 6.983368] zram1: detected capacity change from 0 to 2073178112 [ 7.006259] Adding 2024584k swap on /dev/zram1. Priority:5 extents:1 across:2024584k SS [ 7.013765] zram2: detected capacity change from 0 to 2073178112 [ 7.036370] Adding 2024584k swap on /dev/zram2. Priority:5 extents:1 across:2024584k SS [ 7.043133] zram3: detected capacity change from 0 to 2073178112 [ 7.058677] Adding 2024584k swap on /dev/zram3. Priority:5 extents:1 across:2024584k SS [ 7.107897] ASIX USB Ethernet Adapter:v1.20.0 http://www.asix.com.tw [ 7.107960] ax88179_178a 2-3.1:1.0 (unnamed net_device) (uninitialized): mtu 1500 [ 7.108527] ax88179_178a 2-3.1:1.0 eth1: register 'ax88179_178a' at usb-3610000.xhci-3.1, , 00:18:1a:f2:a5:a4 [ 7.108732] usbcore: registered new interface driver ax88179_178a [ 7.437820] Bridge firewalling registered [ 7.471035] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 7.932201] Netfilter messages via NETLINK v0.30. [ 7.934784] ctnetlink v0.93: registering with nfnetlink. [ 8.226532] tegradc 15210000.nvdisplay: unblank [ 8.226544] tegradc 15200000.nvdisplay: blank - powerdown [ 8.290566] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 8.460477] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.794642] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.767406] fuse init (API version 7.26) [ 10.355032] l4tbr0: port 2(usb0) entered blocking state [ 10.355041] l4tbr0: port 2(usb0) entered forwarding state [ 10.355123] l4tbr0: port 1(rndis0) entered blocking state [ 10.355129] l4tbr0: port 1(rndis0) entered forwarding state [ 10.356042] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 10.356074] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 12.016422] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.016436] Bluetooth: BNEP socket layer initialized [ 12.130155] ax88179_178a 2-3.1:1.0 eth1: ax88179_178a - Link status is: 1 [ 12.130802] ax88179_178a 2-3.1:1.0 eth1: Write medium type: 0x0033 [ 12.133156] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 12.134089] ax88179_178a 2-3.1:1.0 eth1: link up, 1000Mbps, full-duplex, lpa 0xC5E1 [ 13.739243] tegradc 15210000.nvdisplay: unblank [ 13.739254] tegradc 15200000.nvdisplay: blank - powerdown [ 16.212499] gpio tegra-gpio wake20 for gpio=52(G:4) [ 16.221015] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.644476] gpio tegra-gpio wake20 for gpio=52(G:4) [ 26.652351] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.143754] vdd-sdmmc1-sw: disabling [ 34.143790] vdd-1v8-sd: disabling [ 34.143797] vdd-1v8-cvb: disabling [ 34.143801] vdd-epb-1v0: disabling [ 34.143806] avdd-cam-2v8: disabling [ 34.143811] vdd-fan: disabling [ 34.143816] vdd_sys_en: disabling [ 121.689529] capability: warning: `growisofs' uses 32-bit capabilities (legacy support in use) [ 127.000033] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 146.967577] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 208.405848] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 208.440591] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00 [ 208.440605] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x1b 1b 01 00 00 01 00 00 00 00 00 00 00 [ 215.061633] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 215.096359] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00 [ 215.096400] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x1b 1b 01 00 00 01 00 00 00 00 00 00 00 [ 224.021288] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 229.397338] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 229.431774] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00 [ 229.431787] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x1b 1b 00 00 00 02 00 00 00 00 00 00 00 [ 344.312541] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16 [ 352.326211] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16 [ 388.534566] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16 [ 452.382546] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16 [ 478.226270] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 528.145436] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 533.777504] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 533.812135] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00 [ 533.812150] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x1b 1b 00 00 00 02 00 00 00 00 00 00 00 [ 618.513535] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 624.145518] usb 1-2.4.2: reset full-speed USB device number 4 using tegra-xusb [ 624.180062] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00 [ 624.180078] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x1b 1b 00 00 00 02 00 00 00 00 00 00 00