[0000.197] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b47d5d9) [0000.205] I> bit @ 0xd480000 [0000.208] I> Boot-device: eMMC [0000.212] I> sdmmc bdev is already initialized [0000.217] I> pmic: reset reason (nverc) : 0x80 [0000.223] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.231] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.237] I> A/B: bin_type (16) slot 0 [0000.241] I> Loading partition bpmp-fw at 0xd7800000 [0000.245] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.251] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.266] I> Binary(16) of size 532656 is loaded @ 0xd7800000 [0000.272] I> A/B: bin_type (17) slot 0 [0000.275] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.280] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.286] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.300] I> Binary(17) of size 465840 is loaded @ 0xd798e200 [0000.475] I> Loading SCE-FW ... [0000.478] I> A/B: bin_type (12) slot 0 [0000.482] I> Loading partition sce-fw at 0xd7300000 [0000.487] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.492] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.502] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.507] I> Init SCE [0000.510] I> Loading APE-FW ... [0000.513] I> A/B: bin_type (11) slot 0 [0000.516] I> Loading partition adsp-fw at 0xd7400000 [0000.521] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.527] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.536] I> Binary(11) of size 106240 is loaded @ 0xd7400000 [0000.542] I> Copy BTCM section [0000.545] I> A/B: bin_type (13) slot 0 [0000.548] I> Loading partition cpu-bootloader at 0x96000000 [0000.554] I> Reading two headers - addr:0x96000000 blocks:1 [0000.559] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.571] I> Binary(13) of size 275920 is loaded @ 0x96000000 [0000.576] I> A/B: bin_type (20) slot 0 [0000.580] I> Loading partition bootloader-dtb at 0x8520f400 [0000.585] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.591] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.603] I> Binary(20) of size 342992 is loaded @ 0x8520f400 [0000.609] I> A/B: bin_type (14) slot 0 [0000.612] I> Loading partition secure-os at 0x8530f600 [0000.617] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.623] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.632] I> Binary(14) of size 83360 is loaded @ 0x8530f600 [0000.640] I> boot profiler @ 0x275844000 [0000.644] I> Unhalting SCE [0000.646] I> Primary Memory Start:80000000 Size:70000000 [0000.652] I> Extended Memory Start:f0110000 Size:1856f0000 [0000.658] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):eca0c5e NOTICE: BL31: Built : 00:20:29, Mar 13 2019 ERROR: Error initializing runtime service trusty_fast [0001.016] I> Welcome to Cboot [0001.019] I> Cboot Version: t186-13ef9e7a [0001.023] I> CPU-BL Params @ 0x275800000 [0001.027] I> 0) Base:0x00000000 Size:0x00000000 [0001.031] I> 1) Base:0x277f00000 Size:0x00100000 [0001.036] I> 2) Base:0x277e00000 Size:0x00100000 [0001.040] I> 3) Base:0x277d00000 Size:0x00100000 [0001.045] I> 4) Base:0x277c00000 Size:0x00100000 [0001.049] I> 5) Base:0x277b00000 Size:0x00100000 [0001.054] I> 6) Base:0x277800000 Size:0x00200000 [0001.058] I> 7) Base:0x277400000 Size:0x00400000 [0001.063] I> 8) Base:0x277a00000 Size:0x00100000 [0001.067] I> 9) Base:0x277300000 Size:0x00100000 [0001.072] I> 10) Base:0x276800000 Size:0x00800000 [0001.076] I> 11) Base:0x30000000 Size:0x00040000 [0001.081] I> 12) Base:0xf0000000 Size:0x00100000 [0001.085] I> 13) Base:0x30040000 Size:0x00001000 [0001.090] I> 14) Base:0x30048000 Size:0x00001000 [0001.094] I> 15) Base:0x30049000 Size:0x00001000 [0001.099] I> 16) Base:0x3004a000 Size:0x00001000 [0001.103] I> 17) Base:0x3004b000 Size:0x00001000 [0001.107] I> 18) Base:0x3004c000 Size:0x00001000 [0001.112] I> 19) Base:0x3004d000 Size:0x00001000 [0001.116] I> 20) Base:0x3004e000 Size:0x00001000 [0001.121] I> 21) Base:0x3004f000 Size:0x00001000 [0001.125] I> 22) Base:0x00000000 Size:0x00000000 [0001.130] I> 23) Base:0xf0100000 Size:0x00010000 [0001.134] I> 24) Base:0x00000000 Size:0x00000000 [0001.138] I> 25) Base:0x00000000 Size:0x00000000 [0001.143] I> 26) Base:0x00000000 Size:0x00000000 [0001.147] I> 27) Base:0x00000000 Size:0x00000000 [0001.152] I> 28) Base:0x84400000 Size:0x00400000 [0001.156] I> 29) Base:0x30000000 Size:0x00010000 [0001.161] I> 30) Base:0x278000000 Size:0x08000000 [0001.165] I> 31) Base:0x00000000 Size:0x00000000 [0001.170] I> 32) Base:0x276000000 Size:0x00600000 [0001.174] I> 33) Base:0x80000000 Size:0x70000000 [0001.178] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.183] I> 35) Base:0x00000000 Size:0x00000000 [0001.187] I> 36) Base:0x00000000 Size:0x00000000 [0001.192] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.196] I> 38) Base:0x84000000 Size:0x00400000 [0001.201] I> 39) Base:0x96000000 Size:0x02000000 [0001.205] I> 40) Base:0x85000000 Size:0x01200000 [0001.210] I> 41) Base:0x275800000 Size:0x00500000 [0001.214] I> 42) Base:0x00000000 Size:0x00000000 [0001.219] I> 43) Base:0x00000000 Size:0x00000000 [0001.223] GIC-SPI Target CPU: 4 [0001.226] Interrupts Init done [0001.230] calling constructors [0001.233] initializing heap [0001.235] initializing threads [0001.239] initializing timers [0001.242] creating bootstrap completion thread [0001.246] top of bootstrap2() [0001.250] CPU: ARM Cortex A57 [0001.253] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.258] initializing platform [0001.261] I> Boot-device: eMMC [0001.265] I> sdmmc bdev is already initialized [0001.271] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.277] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.283] W> opt-in fuse is not set, skip fuse_burning [0001.288] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.293] W> No valid slot number is found in scratch register [0001.299] W> Return default slot: _a [0001.302] I> A/B: bin_type (21) slot 0 [0001.306] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.319] I> Kernel_dtb @0x80000000 [0001.323] I> Bl_dtb @0x8520f400 [0001.326] I> gpio framework initialized [0001.332] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.342] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.349] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.358] E> I2C: slave not found in slaves. [0001.362] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.370] E> I2C_DEV: Failed to send register address 0x00000004. [0001.375] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.385] E> tca9539_device_init: failed to write polar reg [0001.390] E> tegrabl_tca9539_init: failed to init device! [0001.395] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.404] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.414] I> fixed regulator driver initialized [0001.446] I> register 'maxim' power off handle [0001.452] I> virtual i2c enabled [0001.456] I> registered 'maxim,max77620' pmic [0001.460] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.473] I> Find /i2c@c250000's alias i2c7 [0001.477] I> Reading eeprom i2c=7 address=0x50 [0001.507] I> Device at /i2c@c250000:0x50 [0001.511] I> Reading eeprom i2c=7 address=0x57 [0001.515] E> I2C: slave not found in slaves. [0001.519] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.527] E> I2C_DEV: Failed to send register address 0x00000000. [0001.533] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.542] E> eeprom: Failed to read I2C slave device [0001.547] I> Eeprom read failed 0x3526070d [0001.552] I> Find /i2c@c240000's alias i2c1 [0001.556] I> Reading eeprom i2c=1 address=0x51 [0001.561] E> I2C: slave not found in slaves. [0001.565] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.573] E> I2C_DEV: Failed to send register address 0x00000000. [0001.579] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.588] E> eeprom: Retry to read I2C slave device. [0001.593] E> I2C: slave not found in slaves. [0001.597] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.605] E> I2C_DEV: Failed to send register address 0x00000000. [0001.611] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.620] E> eeprom: Failed to read I2C slave device [0001.625] I> Eeprom read failed 0x3526070d [0001.629] I> Find /i2c@3160000's alias i2c0 [0001.633] I> Reading eeprom i2c=0 address=0x50 [0001.638] E> I2C: slave not found in slaves. [0001.642] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.650] E> I2C_DEV: Failed to send register address 0x00000000. [0001.656] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.665] E> eeprom: Failed to read I2C slave device [0001.670] I> Eeprom read failed 0x3526070d [0001.675] I> Find /i2c@3180000's alias i2c2 [0001.679] I> Reading eeprom i2c=2 address=0x54 [0001.683] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.688] C> GPIO driver for chip_id 0x2 could not be found [0001.693] E> cam_eeprom_read: Can't get gpio driver [0001.698] I> Eeprom read failed 0x4d4d000d [0001.702] I> Reading eeprom i2c=2 address=0x57 [0001.706] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.711] C> GPIO driver for chip_id 0x2 could not be found [0001.716] E> cam_eeprom_read: Can't get gpio driver [0001.721] I> Eeprom read failed 0x4d4d000d [0001.725] I> create_pm_ids: id: 3310-1000-B02-E, len: 15 [0001.730] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.758] E> invalid display type [0001.764] E> cannot find any other nvdisp nodes [0001.768] E> no valid display unit config found in dtb [0001.774] W> display init failed [0001.777] initializing target [0001.780] calling apps_init() [0001.783] starting app kernel_boot_app [0001.789] I> found decompressor handler: lz4-legacy [0001.794] I> decompressing BMP blob ... [0001.804] I> Kernel type = Normal [0001.807] I> Loading kernel/boot.img from built-in storage ... [0001.812] W> No valid slot number is found in scratch register [0001.818] W> Return default slot: _a [0001.821] I> A/B: bin_type (24) slot 0 [0002.581] I> Boot image size read from image header: f20d0 [0002.586] I> Boot image load address: 0x0x80400000 [0002.591] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.353] I> Kernel hdr @0x80400000 [0003.356] I> Kernel dtb @0x80000000 [0003.359] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0003.367] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0003.377] I> Checking boot.img header magic ... [0003.381] I> [OK] [0003.383] I> Valid boot.img @ 0x80400000 [0003.386] I> decompressor handler not found [0003.390] I> Copying kernel image (474242 bytes) from 0x80400800 to 0x84600000 ... [0003.398] I> Done [0003.400] I> Move ramdisk (len: 0) from 0x80474800 to 0x98730000 [0003.407] I> Updated bpmp info to DTB [0003.413] I> Ramdisk: Base: 0x98730000; Size: 0x0 [0003.417] I> Updated initrd info to DTB [0003.421] W> WARN: Fail to override "console=none" in commandline [0003.427] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.434] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.441] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.448] I> disabled_core_mask: 0xffffff0c [0003.452] W> No valid slot number is found in scratch register [0003.458] W> Return default slot: _a [0003.462] I> Active slot suffix: [0003.465] I> add_boot_slot_suffix: slot_suffix = [0003.469] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.504] I> Updated bootarg info to DTB [0003.508] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c5:2e:74 [0003.514] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c5:2e:75 [0003.520] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c5:2e:76 [0003.528] E> Found no plugin manager ids in source DT [0003.533] W> Add plugin manager ids from board info [0003.538] E> "plugin-manager" doesn't exist, creating [0003.543] E> "ids" doesn't exist, creating [0003.547] E> "connection" doesn't exist, creating [0003.552] E> "configs" doesn't exist, creating [0003.556] I> create_pm_ids: id: 3310-1000-B02-E, len: 15 [0003.561] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.572] I> Adding plugin-manager/ids/3310-1000-B02=/i2c@c250000:module@0x50 [0003.579] E> "i2c@c250000" doesn't exist, creating [0003.584] E> "module@0x50" doesn't exist, creating [0003.591] I> Adding plugin-manager/ids/3310-1000-B02-E [0003.598] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.603] I> Adding plugin-manager/configs/3310-power-config 00 [0003.609] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.615] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.621] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.627] I> Adding plugin-manager/configs/3310-display-config 00 [0003.633] I> Adding plugin-manager/cvm [0003.637] E> "chip-id" doesn't exist, creating [0003.641] I> Adding plugin-manager/chip-id/A02P [0003.646] E> "odm-data" doesn't exist, creating [0003.651] I> Adding /chosen/plugin-manager/odm-data [0003.660] I> added [base:0x80000000, size:0x70000000] to /memory [0003.666] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.672] I> added [base:0x275e00000, size:0x200000] to /memory [0003.678] I> added [base:0x276600000, size:0x200000] to /memory [0003.683] I> added [base:0x277000000, size:0x200000] to /memory [0003.689] I> Updated memory info to DTB [0003.694] E> add_disp_param: failed to get display params for du=0 [0003.702] E> "reset" doesn't exist, creating [0003.706] E> "pmc-reset-reason" doesn't exist, creating [0003.711] E> "pmic-reset-reason" doesn't exist, creating [0003.718] I> Adding ecid(000000016440b4061800000016048280) to DT [0003.723] I> disabled_core_mask: 0xffffff0c [0003.735] I> Add serial number:0422818043722 as DT property [0003.744] I> Plugin-manager override starting [0003.750] I> node /plugin-manager/fragement@0 matches [0003.759] I> node /plugin-manager/fragement@4 matches [0003.772] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.790] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.800] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.809] I> node /plugin-manager/fragment-devslp@0 matches [0003.822] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.835] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.845] I> node /plugin-manager/fragment-p3310-c01 matches [0003.857] I> node /plugin-manager/fragment-p3310-c03 matches [0003.894] I> node /plugin-manager/fragment-p3310-c00-camera matches [0003.920] I> Disable plugin-manager status in FDT [0003.924] I> Plugin-manager override finished successfully [0003.929] I> tegrabl_load_kernel_and_dtb: Done [0003.934] I> Sending TOS params [0003.937] I> Sending NS DRAM Ranges to TOS [0003.941] W> Failed to send NS DRAM Ranges to TOS [0003.945] W> Failed to lock interface between BL and TOS [0003.950] E> tegrabl_display_clear: display is not initialized [0003.956] W> Boot logo display failed... [0003.960] I> Kernel EP: 0x84600000, DTB: 0x80000000 U-Boot 2016.07-g0eb73f4 (Mar 13 2019 - 00:20:34 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 213 bytes read in 70 ms (2.9 KiB/s) p2771-0000 eMMC boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/Image 34048008 bytes read in 854 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 0000000080058b6e Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2988) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:30:11 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc1f6776000 s53400 r8192 d32616 u94208 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29404(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7974764K/8220672K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 180372K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB) [ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB) [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009972] Console: colour dummy device 80x25 [ 0.014635] console [tty0] enabled [ 0.018192] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2988) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:30:11 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc1f6776000 s53400 r8192 d32616 u94208 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29404(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7974764K/8220672K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 180372K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB) [ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB) [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009972] Console: colour dummy device 80x25 [ 0.014635] console [tty0] enabled [ 0.018192] bootconsole [uart8250] disabled [ 0.022567] kmemleak: Kernel memory leak detector disabled [ 0.022582] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022597] pid_max: default: 32768 minimum: 301 [ 0.022914] Security Framework initialized [ 0.023075] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023086] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023710] ftrace: allocating 46802 entries in 183 pages [ 0.148277] sched-energy: Sched-energy-costs installed from DT [ 0.148297] ASID allocator initialised with 65536 entries [ 0.184137] tegra-id: chipid=21817. [ 0.184152] tegra-id: opt_subrevision=1. [ 0.184174] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.184187] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-dsi-dp.dts [ 0.184202] DTB Build time: Apr 1 2019 10:02:58 [ 0.229908] CPU1: Booted secondary processor [4e0f0030] [ 0.261572] CPU2: Booted secondary processor [4e0f0030] [ 0.293413] CPU3: Booted secondary processor [411fd073] [ 0.325408] CPU4: Booted secondary processor [411fd073] [ 0.357407] CPU5: Booted secondary processor [411fd073] [ 0.357462] Brought up 6 CPUs [ 0.357503] SMP: Total of 6 processors activated. [ 0.357516] CPU features: detected feature: 32-bit EL0 Support [ 0.358324] CPU: All CPU(s) started at EL2 [ 0.358378] alternatives: patching kernel code [ 0.367717] devtmpfs: initialized [ 0.404429] Initilizing CustomIPI irq domain [ 0.404643] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.404671] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.405579] pinctrl core: initialized pinctrl subsystem [ 0.405786] OS set in device tree is not L4T. [ 0.405943] regulator-dummy: no parameters [ 0.406098] Initializing plugin-manager [ 0.406164] Plugin module not found [ 0.406208] Plugin-manager status disabled [ 0.408015] NET: Registered protocol family 16 [ 0.408708] pstore: using zlib compression [ 0.409122] console [pstore-1] enabled [ 0.409134] pstore: Registered ramoops as persistent store backend [ 0.409148] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.425040] cpuidle: using governor menu [ 0.426491] bpmp: waiting for handshake [ 0.426508] bpmp: handshake completed [ 0.426530] bpmp: synchronizing channels [ 0.426546] bpmp: channels synchronized [ 0.426558] bpmp: mail init ok [ 0.428562] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.428582] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.428596] arm-smmu 12000000.iommu: stage 1 translation [ 0.428610] arm-smmu 12000000.iommu: stage 2 translation [ 0.428623] arm-smmu 12000000.iommu: nested translation [ 0.428638] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.428656] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.428676] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.428690] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.428703] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.430855] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000) [ 0.430885] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.433227] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.435020] Registering BPMP clocks... [ 0.435126] tegra_bpmp_clk_init: clock init ok (636 clks) [ 0.435833] tegra_bpmp_of_clk_init: EMC proxy not found. [ 0.437326] tegra_powergate_init: DONE [ 0.437348] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-dsi-dp.dts [ 0.437372] DTB Build time: Apr 1 2019 10:02:58 [ 0.439399] Tegra reboot handler registered. [ 0.440924] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.441001] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.441024] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.441036] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.441047] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.441216] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.441243] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.441615] iommu: Adding device 3460000.sdhci to group 0 [ 0.442315] iommu: Adding device 3400000.sdhci to group 1 [ 0.443383] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.443409] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.443854] iommu: Adding device 3160000.i2c to group 3 [ 0.444295] iommu: Adding device c240000.i2c to group 4 [ 0.444664] iommu: Adding device 3180000.i2c to group 5 [ 0.445015] iommu: Adding device 3190000.i2c to group 6 [ 0.445492] iommu: Adding device 31b0000.i2c to group 7 [ 0.445849] iommu: Adding device 31c0000.i2c to group 8 [ 0.446200] iommu: Adding device c250000.i2c to group 9 [ 0.446554] iommu: Adding device 31e0000.i2c to group 10 [ 0.449848] iommu: Adding device 3210000.spi to group 11 [ 0.450620] iommu: Adding device c260000.spi to group 12 [ 0.451280] iommu: Adding device 3240000.spi to group 13 [ 0.452697] iommu: Adding device 3100000.serial to group 14 [ 0.453342] iommu: Adding device 3110000.serial to group 15 [ 0.454097] iommu: Adding device c280000.serial to group 16 [ 0.454819] iommu: Adding device 3130000.serial to group 17 [ 0.456943] iommu: Adding device 2490000.ether_qos to group 18 [ 0.457009] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.458050] iommu: Adding device b000000.rtcpu to group 19 [ 0.461013] iommu: Adding device 13e10000.host1x to group 20 [ 0.461597] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.462173] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.462671] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.463177] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.463669] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.464204] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.464664] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.465154] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.465840] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.466778] iommu: Adding device 15700000.vi to group 30 [ 0.467302] iommu: Adding device 15600000.isp to group 31 [ 0.467983] iommu: Adding device 15210000.nvdisplay to group 32 [ 0.468801] iommu: Adding device 15340000.vic to group 33 [ 0.469172] iommu: Adding device 154c0000.nvenc to group 34 [ 0.469559] iommu: Adding device 15480000.nvdec to group 35 [ 0.470158] iommu: Adding device 15380000.nvjpg to group 36 [ 0.470522] iommu: Adding device 15500000.tsec to group 37 [ 0.470886] iommu: Adding device 15100000.tsecb to group 38 [ 0.472429] iommu: Adding device 15810000.se to group 39 [ 0.472783] iommu: Adding device 15820000.se to group 40 [ 0.473154] iommu: Adding device 15830000.se to group 41 [ 0.473524] iommu: Adding device 15840000.se to group 42 [ 0.474855] iommu: Adding device smmu_test to group 43 [ 0.475726] mc: mapped MMIO address: 0xffffff800a680000 -> 0x2c10000 [ 0.475777] mc: mapped MMIO address: 0xffffff800a6a0000 -> 0x2c20000 [ 0.475822] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c30000 [ 0.475866] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c40000 [ 0.475937] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c50000 [ 0.475982] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.476022] mc-err: mcerr ops are set to t18x [ 0.476257] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.477853] iommu: Adding device 3530000.xhci to group 44 [ 0.477939] arm-smmu: forcing sodev map for 3530000.xhci [ 0.478631] iommu: Adding device 3550000.xudc to group 45 [ 0.478678] arm-smmu: forcing sodev map for 3550000.xudc [ 0.479780] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.479822] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.480678] iommu: Adding device 17000000.gp10b to group 46 [ 0.482244] tegra-reset 5000000.clock: registered 193 resets. [ 0.485321] iommu: Adding device d000000.bpmp to group 47 [ 0.485705] bpmp: ping status is 0 [ 0.485864] bpmp d000000.bpmp: firmware tag is 69fa4e41a01fc02a4db1adf71922a54c [ 0.490049] bpmp d000000.bpmp: probe ok [ 0.494616] iommu: Adding device 2600000.dma to group 48 [ 0.496450] GPIO line 459 (pcie0_lane2_mux) hogged as output/low [ 0.496519] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.496625] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.496683] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.496738] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.496830] GPIO line 424 (wifi-enable) hogged as output/high [ 0.496885] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.496942] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.497344] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.503434] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.503797] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.506327] iommu: Adding device 10003000.pcie-controller to group 49 [ 0.506392] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.506900] iommu: Adding device sound to group 50 [ 0.507386] iommu: Adding device 3510000.hda to group 51 [ 0.517596] random: fast init done [ 0.519272] iommu: Adding device c1a0000.aon to group 52 [ 0.519961] vdd-ac-bat: 5000 mV [ 0.522752] vdd-1v8-ap: 1800 mV [ 0.550925] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.556330] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.556852] SCSI subsystem initialized [ 0.557369] usbcore: registered new interface driver usbfs [ 0.557456] usbcore: registered new interface driver hub [ 0.557598] usbcore: registered new device driver usb [ 0.561201] GPIO line 241 (touch-rails) hogged as output/high [ 0.561533] GPIO line 242 (touch-rails) hogged as output/high [ 0.561887] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.562341] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.562443] pca953x 0-0077: failed reading register [ 0.562538] pca953x: probe of 0-0077 failed with error -121 [ 0.574684] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.582140] vddio-ddr: at 1125 mV [ 0.585969] avdd_dsi_csi: 1200 mV [ 0.589950] vdd-1v8: 1800 mV [ 0.593952] vdd-3v3-sys: 3300 mV [ 0.595369] spmic-ldo0: at 1800 mV [ 0.596237] spmic-ldo1: at 800 mV [ 0.601940] vddio-3v3: 3300 mV [ 0.602773] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.605970] vdd-rtc: at 800 mV [ 0.606937] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.609979] spmic-ldo6: at 1500 mV [ 0.613942] vdd-pex-1v00: 1000 mV [ 0.614691] dvdd-pex: 1000 mV [ 0.615348] GPIO line 237 (spmic_gpio_input) hogged as input [ 0.615543] GPIO line 238 (spmic_gpio_input) hogged as input [ 0.615880] gpiochip_setup_dev: registered GPIOs 232 to 239 on device: gpiochip3 (max77620-gpio) [ 0.618209] max77620 4-003c: max77620 probe successful [ 0.618838] media: Linux media interface: v0.10 [ 0.618908] Linux video capture interface: v2.00 [ 0.623269] pps_core: LinuxPPS API ver. 1 registered [ 0.623301] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.623346] PTP clock support registered [ 0.623913] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.623962] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.627189] tegra_fiq_debugger_init: found FIQ source (IRQ 387) [ 0.631561] Advanced Linux Sound Architecture Driver Initialized. [ 0.632081] Bluetooth: Core ver 2.22 [ 0.632137] NET: Registered protocol family 31 [ 0.632159] Bluetooth: HCI device and connection manager initialized [ 0.632188] Bluetooth: HCI socket layer initialized [ 0.632212] Bluetooth: L2CAP socket layer initialized [ 0.632251] Bluetooth: SCO socket layer initialized [ 0.633083] en-vdd-sd: 3300 mV [ 0.637957] vdd-hdmi: 5000 mV [ 0.638508] vdd-usb0-5v: 5000 mV [ 0.638885] vdd-usb1-5v: 5000 mV [ 0.641940] en-vdd-ts-1v8: 1800 mV [ 0.645941] en-vdd-ts-hv-3v3: 3300 mV [ 0.646596] en-vdd-disp-3v3: 3300 mV [ 0.647217] en-mdm-pwr-3v7: 3700 mV [ 0.647838] en-vdd-disp-1v8: 1800 mV [ 0.648429] en-vdd-cam-hv-2v8: 2800 mV [ 0.649140] vdd-fan: 5000 mV [ 0.649440] vdd-3v3: 3300 mV [ 0.650227] dis-vdd-1v2: 1200 mV [ 0.650568] en-vdd-vcm-2v8: 2800 mV [ 0.651185] vdd-usb2-5v: 5000 mV [ 0.651582] vdd-sys-bl: 3300 mV [ 0.654998] camchar: rtcpu character device driver loaded [ 0.655676] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.657782] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.659586] clocksource: Switched to clocksource arch_sys_counter [ 0.700186] VFS: Disk quotas dquot_6.6.0 [ 0.700428] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.701026] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.702023] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.702054] nvmap_page_pool_init: Total RAM pages: 2010075 [ 0.702078] nvmap_page_pool_init: nvmap page pool size: 251259 pages (981 MB) [ 0.702245] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.706019] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.717687] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.717928] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.718406] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.718531] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.718678] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.718827] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.719044] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.719343] la/ptsa driver initialized. [ 0.719373] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.719400] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.720589] NET: Registered protocol family 2 [ 0.722591] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.723245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.724100] TCP: Hash tables configured (established 65536 bind 65536) [ 0.724178] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.724363] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.725242] NET: Registered protocol family 1 [ 0.726477] RPC: Registered named UNIX socket transport module. [ 0.726506] RPC: Registered udp transport module. [ 0.726528] RPC: Registered tcp transport module. [ 0.726548] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.726806] Trying to unpack rootfs image as initramfs... [ 0.752781] host1x 13e10000.host1x: initialized [ 0.754232] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.759016] audit: initializing netlink subsys (disabled) [ 0.759098] audit: type=2000 audit(0.640:1): initialized [ 0.759853] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.771177] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.774016] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.775615] 9p: Installing v9fs 9p2000 file system support [ 0.781679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.781866] io scheduler noop registered [ 0.782501] io scheduler cfq registered (default) [ 0.787401] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.849176] iommu: Adding device aconnect@2a41000:adsp_audio to group 53 [ 0.888602] iommu: Adding device 2993000.adsp to group 54 [ 0.889752] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.892491] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.896313] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.897563] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.898653] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.899812] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.902897] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.904055] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.904498] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.904812] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.905103] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 0.905145] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 0.908111] tegra-pcie 10003000.pcie-controller: probing port 1, using 1 lanes [ 0.909328] tsec 15500000.tsec: initialized [ 0.910367] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.910419] tsec 15100000.tsecb: initialized [ 0.913833] nvdec 15480000.nvdec: initialized [ 0.920185] falcon 15340000.vic: initialized [ 0.921719] falcon 154c0000.nvenc: initialized [ 0.923246] falcon 15380000.nvjpg: initialized [ 0.927386] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.929109] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.930680] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.932269] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.933799] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.935339] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.936909] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.938441] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.942286] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.942328] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.942397] tegradccommon 15200000.dc_common: dma mapping done [ 0.944895] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor [ 0.945387] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.945437] tegradc 15210000.nvdisplay: Display dc.ffffff800b610000 registered with id=0 [ 0.952772] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.952826] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.952863] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.953204] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.953232] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.958247] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 10 channels [ 0.959421] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.960264] kfuse 3830000.kfuse: initialized [ 0.961918] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.967016] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.968787] tegradc 15210000.nvdisplay: probed [ 0.970312] console [ttyS0] disabled [ 0.970437] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.349672] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 1.757953] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 2.166338] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 2.168383] tegra-pcie 10003000.pcie-controller: link 1 down, ignoring [ 2.574178] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.981754] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.254966] console [ttyS0] enabled [ 3.255649] Console: switching to colour frame buffer device 80x30 [ 3.257430] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.264857] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.265116] serial-tegra 3130000.serial: RX in PIO mode [ 3.266110] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 3.272719] [drm] Initialized [ 3.300837] tegradc 15210000.nvdisplay: fb registered [ 3.303372] brd: module loaded [ 3.313955] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 3.314314] tegradc 15210000.nvdisplay: dp: irq event received, ignoring [ 3.319935] loop: module loaded [ 3.320013] tegra_profiler: version: 1.132, samples/io: 46/26 [ 3.320152] tegra_profiler: auth: init [ 3.320541] nct1008_nct72 7-004c: starting parse dt [ 3.320642] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 3.320647] nct1008_nct72 7-004c: success parsing dt [ 3.320747] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 3.321082] THERMAL EST: found 3 subdevs [ 3.321086] THERMAL EST num_resources: 0 [ 3.321090] [THERMAL EST subdev 0] [ 3.321095] [THERMAL EST subdev 1] [ 3.321099] [THERMAL EST subdev 2] [ 3.321418] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.321420] THERMAL EST: thz register success. [ 3.321631] THERMAL EST: end of probe, return err: 0 [ 3.322621] hisi_sas: driver version v1.6 [ 3.327100] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.327111] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.328136] scsi host0: tegra_ahci [ 3.333073] scsi host1: tegra_ahci [ 3.333216] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.333220] ata2: DUMMY [ 3.338939] libphy: Fixed MDIO Bus: probed [ 3.339345] tun: Universal TUN/TAP device driver, 1.6 [ 3.339348] tun: (C) 1999-2004 Max Krasnyansky [ 3.340744] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.340746] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.340778] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.340780] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.340809] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.340811] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.340845] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.340847] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.342547] eqos 2490000.ether_qos: no PHY interrupt found [ 3.342737] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.346438] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c5 2e 76 [ 3.346556] libphy: dwc_phy: probed [ 3.346908] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.349035] PPP generic driver version 2.4.2 [ 3.349305] PPP BSD Compression module registered [ 3.349309] PPP Deflate Compression module registered [ 3.349327] PPP MPPE Compression module registered [ 3.349331] NET: Registered protocol family 24 [ 3.349370] usbcore: registered new interface driver r8152 [ 3.349402] usbcore: registered new interface driver asix [ 3.349427] usbcore: registered new interface driver ax88179_178a [ 3.349481] usbcore: registered new interface driver cdc_ether [ 3.349506] usbcore: registered new interface driver net1080 [ 3.349527] usbcore: registered new interface driver cdc_subset [ 3.349552] usbcore: registered new interface driver zaurus [ 3.349584] usbcore: registered new interface driver cdc_ncm [ 3.349912] VFIO - User Level meta-driver version: 0.3 [ 3.353016] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 3.353508] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 3.355645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.355661] ehci-pci: EHCI PCI platform driver [ 3.355706] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.355714] ohci-pci: OHCI PCI platform driver [ 3.355756] ohci-platform: OHCI generic platform driver [ 3.362334] usbcore: registered new interface driver uas [ 3.362425] usbcore: registered new interface driver usb-storage [ 3.362585] usbcore: registered new interface driver usbserial [ 3.368037] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.369890] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 3.386240] nct1008_nct72 7-004c: initial LOC temp: 54000 [ 3.386547] nct1008_nct72 7-004c: initial EXT temp: 67250 [ 3.387151] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 3.387446] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 3.387679] nct1008_nct72 7-004c: nct1008_probe: initialized [ 3.431921] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.433978] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.434243] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 3.434251] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.434256] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 3.434261] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 3.434267] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.434618] iommu: Adding device 0000:00:01.0 to group 55 [ 3.434628] arm-smmu: forcing sodev map for 0000:00:01.0 [ 3.434731] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.435630] iommu: Adding device 0000:01:00.0 to group 56 [ 3.435635] arm-smmu: forcing sodev map for 0000:01:00.0 [ 3.447776] pci 0000:00:01.0: BAR 14: assigned [mem 0x40100000-0x403fffff] [ 3.447782] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.447792] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x401fffff] [ 3.447808] pci 0000:01:00.0: BAR 6: assigned [mem 0x40200000-0x402fffff pref] [ 3.447814] pci 0000:01:00.0: BAR 3: assigned [mem 0x40300000-0x40303fff] [ 3.447828] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 3.447844] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.447850] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.447859] pci 0000:00:01.0: bridge window [mem 0x40100000-0x403fffff] [ 3.450777] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.450782] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.451184] igb 0000:01:00.0: enabling device (0000 -> 0002) [ 3.456018] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 3.456022] tegra-usb-cd usb_cd: connected to SDP [ 3.456065] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 3.456323] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 3.457308] mousedev: PS/2 mouse device common for all mice [ 3.457445] usbcore: registered new interface driver xpad [ 3.486091] pps pps0: new PPS source ptp1 [ 3.486100] igb 0000:01:00.0: added PHC on eth1 [ 3.486104] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 3.486109] igb 0000:01:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:a0:10:01:7e:99 [ 3.486220] igb 0000:01:00.0: eth1: PBA No: 000300-000 [ 3.486225] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 3.564055] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.565514] Wake73 for irq=42 [ 3.566865] rtc rtc1: alarm rtc device [ 3.566880] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.566913] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.567181] i2c /dev entries driver [ 3.571300] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.576404] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported [ 3.577136] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 3 not supported [ 3.578811] parse_throttle_dt_data: Num cap clks = 4 [ 3.578815] parse_throttle_dt_data: clk=mcpu type=1 [ 3.578818] parse_throttle_dt_data: clk=bcpu type=2 [ 3.578828] parse_throttle_dt_data: clk=gpu type=4 [ 3.578832] parse_throttle_dt_data: clk=emc type=3 [ 3.580157] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.580846] FAN dev name: pwm-fan [ 3.580911] FAN:gpio request success. [ 3.580920] FAN: can't find tach_gpio [ 3.580955] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.581274] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 3.581279] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.581728] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.581733] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.581738] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.581742] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.581747] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.581751] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.581755] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.581789] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.581795] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.581800] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.584369] device-mapper: uevent: version 1.0.3 [ 3.585313] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.602909] cpufreq: platform driver Initialization: pass [ 3.608053] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.608163] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.614040] sdhci: Secure Digital Host Controller Interface driver [ 3.614042] sdhci: Copyright(c) Pierre Ossman [ 3.614043] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.615532] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.617501] CMDQ: cmdq_platfm_init successful [ 3.618597] CQE: CMD_TIMING bit set for R1B DCMD [ 3.621194] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.627503] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.627551] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.629397] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.631273] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 258 [ 3.635908] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.654991] ata1: SATA link down (SStatus 0 SControl 300) [ 3.659605] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.671595] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.687746] gpio tegra-gpio wake71 for gpio=125(P:5) [ 3.687796] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.705128] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 3.718588] mmc0: periodic cache flush enabled [ 3.718600] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 3.719079] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 3.719305] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 3.719487] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 3.719738] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 3.722523] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 3.787070] tegradc 15210000.nvdisplay: dp: irq event received, ignoring [ 3.925918] mmc1: hw tuning done ... [ 3.932693] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.318842] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.327223] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.336282] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.344655] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.353484] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.361894] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.370737] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.379097] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.388148] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.396528] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.405384] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.413742] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.422586] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.430932] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.439751] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.448124] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.457919] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.466260] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.475271] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.483622] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.492408] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.500741] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.509737] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.518056] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.527076] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.535396] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.544194] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.552522] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.561346] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.569699] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.578507] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 4.586845] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 4.596378] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.602549] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.608679] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.615935] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-dp-pwr [ 4.623108] tegradc 15210000.nvdisplay: dp: couldn't get regulator avdd-dp-pll [ 4.630357] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-edp-sec-mode [ 4.638037] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-dp-pad [ 4.645526] Parent Clock set for DC plld3 [ 4.655406] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 4.673800] dp lt: state 0 (Reset), pending_lt_evt 1 [ 4.678791] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 4.685176] dp lt: state 0 (Reset), pending_lt_evt 0 [ 4.691797] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 4.698953] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 4.704982] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 4.711801] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 4.718616] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 4.725420] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 4.732217] dp lt: tx_pu: 0x22 [ 4.736275] dp lt: CR done [ 4.738982] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 4.747435] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 4.756300] dp lt: CE done [ 4.759007] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 4.768405] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 4.775605] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 4.776194] tegra-se-nvhost 15810000.se: initialized [ 4.777295] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.777904] tegra-se-nvhost 15820000.se: initialized [ 4.789793] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.790370] tegra-se-nvhost 15830000.se: initialized [ 4.791122] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.791718] tegra-se-nvhost 15840000.se: initialized [ 4.792598] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.792909] hidraw: raw HID events driver (C) Jiri Kosina [ 4.793902] usbcore: registered new interface driver usbhid [ 4.793903] usbhid: USB HID core driver [ 4.795686] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 4.795714] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 4.795828] ina3221x: probe of 0-0042 failed with error -121 [ 4.796067] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 4.796093] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 4.796186] ina3221x: probe of 0-0043 failed with error -121 [ 4.798815] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.800954] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 4.801214] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.801330] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 4.801529] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 4.802228] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 4.802298] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 4.802347] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 4.802396] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 4.802491] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 4.802837] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 4.802838] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 4.803747] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 4.805288] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.805761] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.805978] register_ari_mca_banks: Registered MCA ROC:IOB [ 4.806043] register_ari_mca_banks: Registered MCA ROC:CCE [ 4.806348] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806350] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 4.806352] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 4.806401] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806403] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 4.806404] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 4.806451] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806453] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 4.806454] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 4.806505] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806506] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 4.806508] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 4.806553] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806555] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 4.806556] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 4.806603] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806607] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 4.806608] tegra18-bridge 2100000.axip2p: bridge probed OK [ 4.806656] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806660] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 4.806661] tegra18-bridge 2110000.axip2p: bridge probed OK [ 4.806707] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806711] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 4.806712] tegra18-bridge 2120000.axip2p: bridge probed OK [ 4.806758] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806762] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 4.806763] tegra18-bridge 2130000.axip2p: bridge probed OK [ 4.806811] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806813] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 4.806814] tegra18-bridge 2140000.axip2p: bridge probed OK [ 4.806868] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806872] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 4.806873] tegra18-bridge 2150000.axip2p: bridge probed OK [ 4.806922] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806926] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 4.806927] tegra18-bridge 2160000.axip2p: bridge probed OK [ 4.806973] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.806978] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 4.806979] tegra18-bridge 2170000.axip2p: bridge probed OK [ 4.807024] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.807029] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 4.807030] tegra18-bridge 2180000.axip2p: bridge probed OK [ 4.807075] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.807078] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 4.807079] tegra18-bridge 2190000.axip2p: bridge probed OK [ 4.807131] **** A57 ECC: Enabled [ 4.807133] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 4.807191] tegra18x_actmon d230000.actmon: in actmon_register()... [ 4.807663] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.808133] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 4.808274] denver_knobs_init:MTS_VERSION:43068234 [ 4.812778] nvpmodel: initialized successfully [ 4.814590] usbcore: registered new interface driver snd-usb-audio [ 4.822025] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 4.822161] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 4.916130] OPE platform probe [ 4.916267] OPE platform probe successful [ 4.929251] tegra-asoc: sound: This is a dummy codec [ 5.023357] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 5.023444] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 5.023523] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 5.023630] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 5.023709] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 5.023792] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 5.023897] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 5.023976] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 5.024059] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 5.024137] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 5.024218] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 5.024297] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 5.024376] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 5.024470] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 5.024550] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 5.024629] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 5.024709] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 5.024790] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 5.025367] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 5.025459] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 5.071401] u32 classifier [ 5.071404] Actions configured [ 5.071482] Initializing XFRM netlink socket [ 5.073661] NET: Registered protocol family 10 [ 5.075180] NET: Registered protocol family 17 [ 5.075191] NET: Registered protocol family 15 [ 5.075396] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.075472] Bluetooth: RFCOMM socket layer initialized [ 5.075485] Bluetooth: RFCOMM ver 1.11 [ 5.075490] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.075495] Bluetooth: HIDP socket layer initialized [ 5.075534] 9pnet: Installing 9P2000 support [ 5.075600] Key type dns_resolver registered [ 5.081338] Registered cp15_barrier emulation handler [ 5.081359] Registered setend emulation handler [ 5.082735] registered taskstats version 1 [ 5.087010] isp 15600000.isp: initialized [ 5.092140] nvcsi 150c0000.nvcsi: initialized [ 5.100476] tegra-vi4 15700000.vi: initialized [ 5.101582] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint. [ 5.101584] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint. [ 5.102095] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 5.102171] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 5.102240] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 5.102474] input: gpio-keys as /devices/gpio-keys/input/input2 [ 5.144453] tegra_rtc c2a0000.rtc: setting system clock to 2019-04-01 08:22:13 UTC (1554106933) [ 5.145680] mmcblk mmc0:0001: Card claimed for testing. [ 5.187502] bpmp: mounted debugfs mirror [ 5.189925] bwmgr: missing cdev-type property [ 5.196045] spmic-ldo0: disabling [ 5.196253] spmic-ldo1: disabling [ 5.196416] en-vdd-sd: disabling [ 5.196419] vdd-usb0-5v: disabling [ 5.196421] vdd-usb1-5v: disabling [ 5.196424] en-vdd-disp-3v3: disabling [ 5.196426] en-mdm-pwr-3v7: disabling [ 5.196427] en-vdd-disp-1v8: disabling [ 5.196429] en-vdd-cam-hv-2v8: disabling [ 5.196431] vdd-3v3: disabling [ 5.196433] en-vdd-vcm-2v8: disabling [ 5.196455] vdd-usb2-5v: disabling [ 5.196457] vdd-sys-bl: disabling [ 5.196464] ALSA device list: [ 5.196466] #0: tegra-hda at 0x3518000 irq 384 [ 5.196468] #1: tegra-snd-t186ref-mobile-rt565x [ 5.847618] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 5.853613] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 5.867609] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 5.874793] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 5.883128] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 5.885363] EXT4-fs (mmcblk0p1): 4 orphan inodes deleted [ 5.885365] EXT4-fs (mmcblk0p1): recovery complete [ 5.888696] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.888714] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 5.890688] devtmpfs: mounted [ 5.892866] Freeing unused kernel memory: 8512K [ 5.923950] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 5.932290] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 5.941311] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 5.949648] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 5.958692] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 5.967041] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 5.976097] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 5.984488] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 5.993565] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.001928] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.010538] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.010778] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.012052] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.014001] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.015258] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.017942] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.019206] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.021165] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.022419] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.024367] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.025626] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.027553] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.028817] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.030756] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.032017] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.033964] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.035218] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.037188] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.038443] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.040411] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 6.041687] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 5 [ 6.044894] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 6.209246] cgroup: cgroup2: unknown option "nsdelegate" [ 6.232148] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.256794] systemd[1]: Detected architecture arm64. [ 6.343754] systemd[1]: Set hostname to . [ 6.429812] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.446905] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.634906] random: systemd: uninitialized urandom read (16 bytes read) [ 6.649316] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.659203] random: systemd: uninitialized urandom read (16 bytes read) [ 6.665895] systemd[1]: Reached target Swap. [ 6.670437] random: systemd: uninitialized urandom read (16 bytes read) [ 6.680312] systemd[1]: Created slice System Slice. [ 6.686058] systemd[1]: Listening on Journal Socket. [ 6.696010] systemd[1]: Mounting Huge Pages File System... [ 6.753201] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 6.770262] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.146889] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-dp-pwr [ 7.146921] tegradc 15210000.nvdisplay: dp: couldn't get regulator avdd-dp-pll [ 7.146930] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-edp-sec-mode [ 7.146938] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-dp-pad [ 7.172166] random: crng init done [ 7.172168] random: 7 urandom warning(s) missed due to ratelimiting [ 7.683698] tegra-i2c c240000.i2c: no acknowledge from address 0x69 [ 7.683738] bmi160 1-0069: bmi_i2c_rd ERR: 0x00 [ 7.683740] bmi160 1-0069: bmi_init _id_i2c ERR [ 9.319183] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-dp-pwr [ 9.319192] tegradc 15210000.nvdisplay: dp: couldn't get regulator avdd-dp-pll [ 9.319200] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-edp-sec-mode [ 9.319207] tegradc 15210000.nvdisplay: dp: couldn't get regulator vdd-dp-pad [ 16.651211] vdd-1v8: voltage operation not allowed [ 16.657362] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.683744] vdd-1v8: voltage operation not allowed [ 16.689840] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.716559] vdd-1v8: voltage operation not allowed [ 16.722688] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.733065] vdd-1v8: voltage operation not allowed [ 16.739202] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.853631] vdd-1v8: voltage operation not allowed [ 16.859850] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.868743] vdd-1v8: voltage operation not allowed [ 16.874958] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 16.884472] vdd-1v8: voltage operation not allowed [ 16.890679] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)