ÿâ [0000.085] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.093] I> MB1 (prd-version: 2.2.0.0-t194-41334769-3540ffaa) [0000.098] I> Boot-mode: Coldboot [0000.101] I> Platform: Silicon [0000.104] I> Chip revision : A02P [0000.107] I> Bootrom patch version : 15 (correctly patched) [0000.112] I> ATE fuse revision : 0x200 [0000.116] I> Ram repair fuse : 0x0 [0000.119] I> Ram Code : 0x2 [0000.121] I> rst_source: 0x0, rst_level: 0x0 [0000.126] I> Boot-device: SDMMC (instance: 3) [0000.142] I> sdmmc DDR50 mode [0000.146] I> Boot chain mechanism: A/B [0000.150] I> Current Boot-Chain Slot: 0 [0000.153] W> No valid slot number is found in scratch register [0000.159] W> Return default slot: _a [0000.164] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.171] I> Temperature = 24000 [0000.174] W> Skipping boost for clk: BPMP_CPU_NIC [0000.178] W> Skipping boost for clk: BPMP_APB [0000.182] W> Skipping boost for clk: AXI_CBB [0000.186] W> Skipping boost for clk: AON_CPU_NIC [0000.190] W> Skipping boost for clk: CAN1 [0000.194] W> Skipping boost for clk: CAN2 [0000.198] I> Boot-device: SDMMC (instance: 3) [0000.209] I> Sdmmc: HS400 mode enabled [0000.214] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.220] W> Thermal config not found in BCT [0000.229] W> MEMIO rail config not found in BCT [0000.251] I> sdmmc bdev is already initialized [0000.295] W> Platform config not found in BCT [0000.329] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.338] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-2fb96459) [0000.339] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.339] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.340] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.346] W> device prod register failed [0000.349] I> Boot_device: SDMMC_BOOT instance: 3 [0000.354] I> sdmmc-3 params source = boot args [0000.359] I> sdmmc-3 params source = boot args [0000.362] I> sdmmc bdev is already initialized [0000.371] I> Found 21 partitions in SDMMC_BOOT (instance 3) [0000.377] I> Found 41 partitions in SDMMC_USER (instance 3) [0000.378] W> No valid slot number is found in scratch register [0000.383] W> Return default slot: _a [0000.387] I> Active Boot chain : 0 [0000.414] I> Relocating BR-BCT [0000.415] > DEVICE_PROD: device prod is not initialized. [0000.441] E> I2C: slave not found in slaves. [0000.442] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0000.443] E> I2C_DEV: Failed to send register address 0x00000000. [0000.444] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0000.445] E> eeprom: Failed to read I2C slave device [0000.448] I> Failed to read CVB eeprom data @ AE [0000.452] I> Retrying CVB eeprom read @ AC ... [0000.457] E> I2C: slave not found in slaves. [0000.461] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0000.468] E> I2C_DEV: Failed to send register address 0x00000000. [0000.474] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0000.483] E> eeprom: Failed to read I2C slave device [0000.488] I> Failed to read CVB eeprom data @ AC [0000.493] E> Error getting EEPROM data! [0000.496] E> cpubl: Parallel task execution failed [0000.501] I> ðŸåðŸåðŸåðŸåðŸåðŸåðŸåðŸå: execution failed [0000.507] I> ðŸåðŸåðŸåðŸåðŸåðŸåðŸåðŸå: execution failed [0000.513] E> Top caller module: EEPROM, error module: I2C, reason: 0x0d, aux_info: 0x05 [0000.520] I> Reset to recovery mode [0000.54ÿâ [0000.085] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.094] I> MB1 (prd-version: 2.2.0.0-t194-41334769-3540ffaa) [0000.099] I> Boot-mode: Coldboot [0000.102] I> Platform: Silicon [0000.105] I> Chip revision : A02P [0000.108] I> Bootrom patch version : 15 (correctly patched) [0000.113] I> ATE fuse revision : 0x200 [0000.116] I> Ram repair fuse : 0x0 [0000.119] I> Ram Code : 0x2 [0000.122] I> rst_source: 0x0, rst_level: 0x0 [0000.127] I> Boot-device: SDMMC (instance: 3) [0000.143] I> sdmmc DDR50 mode [0000.147] I> Boot chain mechanism: A/B [0000.151] I> Current Boot-Chain Slot: 0 [0000.154] W> No valid slot number is found in scratch register [0000.160] W> Return default slot: _a [0000.164] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.171] I> Temperature = 24000 [0000.174] W> Skipping boost for clk: BPMP_CPU_NIC [0000.179] W> Skipping boost for clk: BPMP_APB [0000.183] W> Skipping boost for clk: AXI_CBB [0000.187] W> Skipping boost for clk: AON_CPU_NIC [0000.191] W> Skipping boost for clk: CAN1 [0000.195] W> Skipping boost for clk: CAN2 [0000.199] I> Boot-device: SDMMC (instance: 3) [0000.208] I> Sdmmc: HS400 mode enabled [0000.212] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.219] W> Thermal config not found in BCT [0000.227] W> MEMIO rail config not found in BCT [0000.249] I> sdmmc bdev is already initialized [0000.294] W> Platform config not found in BCT [0000.328] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.337] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-2fb96459) [0000.337] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.338] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.339] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.344] W> device prod register failed [0000.348] I> Boot_device: SDMMC_BOOT instance: 3 [0000.353] I> sdmmc-3 params source = boot args [0000.358] I> sdmmc-3 params source = boot args [0000.361] I> sdmmc bdev is already initialized [0000.369] I> Found 21 partitions in SDMMC_BOOT (instance 3) [0000.376] I> Found 41 partitions in SDMMC_USER (instance 3) [0000.377] W> No valid slot number is found in scratch register [0000.382] W> Return default slot: _a [0000.385] I> Active Boot chain : 0 [0000.412] I> Relocating BR-BCT [0000.414] > DEVICE_PROD: device prod is not initialized. [0000.439] E> I2C: slave not found in slaves. [0000.440] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0000.441] E> I2C_DEV: Failed to send register address 0x00000000. [0000.442] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0000.442] E> eeprom: Failed to read I2C slave device [0000.446] I> Failed to read CVB eeprom data @ AE [0000.451] I> Retrying CVB eeprom read @ AC ... [0000.456] E> I2C: slave not found in slaves. [0000.460] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0000.467] E> I2C_DEV: Failed to send register address 0x00000000. [0000.473] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0000.482] E> eeprom: Failed to read I2C slave device [0000.487] I> Failed to read CVB eeprom data @ AC [0000.491] E> Error getting EEPROM data! [0000.495] E> cpubl: Parallel task execution failed [0000.500] I> ðŸåðŸåðŸåðŸåðŸåðŸåðŸåðŸå: execution failed [0000.505] I> ðŸåðŸåðŸåðŸåðŸåðŸåðŸåðŸå: execution failed [0000.511] E> Top caller module: EEPROM, error module: I2C, reason: 0x0d, aux_info: 0x05 [0000.519] I> Reset to recovery mode [0000.5ÿâ [0000.085] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.093] I> MB1 (prd-version: 2.2.0.0-t194-41334769-3540ffaa) [0000.099] I> Boot-mode: Coldboot [0000.102] I> Platform: Silicon [0000.105] I> Chip revision : A02P [0000.108] I> Bootrom patch version : 15 (correctly patched) [0000.113] I> ATE fuse revision : 0x200 [0000.116] I> Ram repair fuse : 0x0 [0000.119] I> Ram Code : 0x2 [0000.122] I> rst_source: 0x0, rst_level: 0x0 [0000.127] I> Boot-device: SDMMC (instance: 3) [0000.143] I> sdmmc DDR50 mode [0000.147] I> Boot chain mechanism: A/B [0000.151] I> Current Boot-Chain Slot: 0 [0000.154] W> No valid slot number is found in scratch register [0000.160] W> Return default slot: _a [0000.164] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.171] I> Temperature = 24500 [0000.174] W> Skipping boost for clk: BPMP_CPU_NIC [0000.179] W> Skipping boost for clk: BPMP_APB [0000.183] W> Skipping boost for clk: AXI_CBB [0000.187] W> Skipping boost for clk: AON_CPU_NIC [0000.191] W> Skipping boost for clk: CAN1 [0000.195] W> Skipping boost for clk: CAN2 [0000.199] I> Boot-device: SDMMC (instance: 3) [0000.208] I> Sdmmc: HS400 mode enabled [0000.212] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.219] W> Thermal config not found in BCT [0000.227] W> MEMIO rail config not found in BCT [0000.249] I> sdmmc bdev is already initialized [0000.293] W> Platform config not found in BCT [0000.327] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.336] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-2fb96459) [0000.337] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.337] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.338] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.344] W> device prod register failed [0000.348] I> Boot_device: SDMMC_BOOT instance: 3 [0000.352] I> sdmmc-3 params source = boot args [0000.358] I> sdmmc-3 params source = boot args [0000.361] I> sdmmc bdev is already initialized [0000.369] I> Found 21 partitions in SDMMC_BOOT (instance 3) [0000.376] I> Found 41 partitions in SDMMC_USER (instance 3) [0000.377] W> No valid slot number is found in scratch register [0000.381] W> Return default slot: _a [0000.385] I> Active Boot chain : 0 [0000.412] I> Relocating BR-BCT [0000.413] > DEVICE_PROD: device prod is not initialized. [0000.438] E> I2C: slave not found in slaves. [0000.439] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0000.440] E> I2C_DEV: Failed to send register address 0x00000000. [0000.441] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0000.442] E> eeprom: Failed to read I2C slave device [0000.445] I> Failed to read CVB eeprom data @ AE [0000.450] I> Retrying CVB eeprom read @ AC ... [0000.455] E> I2C: slave not found in slaves. [0000.459] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0000.466] E> I2C_DEV: Failed to send register address 0x00000000. [0000.472] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0000.481] E> eeprom: Failed to read I2C slave device [0000.486] I> Failed to read CVB eeprom data @ AC [0000.490] E> Error getting EEPROM data! [0000.494] E> cpubl: Parallel task execution failed [0000.499] I> ðŸåðŸåðŸåðŸåðŸåðŸåðŸåðŸå: execution failed [0000.504] I> ðŸåðŸåðŸåðŸåðŸåðŸåðŸåðŸå: execution failed [0000.510] E> Top caller module: EEPROM, error module: I2C, reason: 0x0d, aux_info: 0x05 [0000.518] I> Reset to recovery mode [0000.54