=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.02.24 13:46:36 =~=~=~=~=~=~=~=~=~=~=~= [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.069] I> Boot-mode: Coldboot [0000.071] I> Chip revision : A02 [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x2 [0000.089] I> rst_source : 0x2 [0000.091] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 43000 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.174] I> Sdmmc: HS400 mode enabled [0000.178] I> ECC region[0]: Start:0x0, End:0x0 [0000.182] I> ECC region[1]: Start:0x0, End:0x0 [0000.186] I> ECC region[2]: Start:0x0, End:0x0 [0000.191] I> ECC region[3]: Start:0x0, End:0x0 [0000.195] I> ECC region[4]: Start:0x0, End:0x0 [0000.199] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.205] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.209] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.213] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.218] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.223] E> FAILED: Thermal config [0000.231] E> FAILED: MEMIO rail config [0000.249] I> Boot-device: eMMC [0000.258] I> sdmmc bdev is already initialized [0000.333] I> MB1 done main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init [0000.341] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.342] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.342] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.343] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.349] W> device prod register failed [0000.352] I> Boot-device: eMMC [0000.355] I> Boot_device: SDMMC_BOOT instance: 3 [0000.361] I> sdmmc-3 params source = boot args [0000.364] I> sdmmc bdev is already initialized [0000.368] I> sdmmc-3 params source = boot args [0000.377] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.383] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.384] W> No valid slot number is found in scratch register [0000.389] W> Return default slot: _a [0000.393] I> Active Boot chain : 0 [0000.396] I> parsing oem signed section of bpmp-fw header done [0000.402] I> bpmp-fw binary init read from storage [0000.407] I> oem authentication of bpmp-fw header done [0000.413] I> bpmp-fw binary done read from storage [0000.416] I> bpmp-fw: Authentication init Done [0000.420] I> parsing oem signed section of cpubl header done [0000.426] I> cpubl binary init read from storage [0000.430] I> bpmp-fw: Authentication Finalize Done [0000.435] I> oem authentication of cpubl header done [0000.440] I> cpubl binary done read from storage [0000.444] I> cpubl: Authentication init Done [0000.450] I> parsing oem signed section of rce header done [0000.453] I> rce binary init read from storage [0000.458] I> Relocating BR-BCT [0000.461] I> cpubl: Authentication Finalize Done [0000.465] I> oem authentication of rce header done [0000.470] I> rce binary done read from storage [0000.474] I> rce: Authentication init Done [0000.479] I> parsing oem signed section of ape header done [0000.483] I> ape binary init read from storage [0000.488] I> rce: Authentication Finalize Done [0000.492] I> oem authentication of ape header done [0000.496] I> ape binary done read from storage [0000.501] I> ape: Authentication init Done [0000.506] I> parsing oem signed section of tos header done [0000.510] I> tos binary init read from storage [0000.514] I> ape: Authentication Finalize Done [0000.519] I> oem authentication of tos header done [0000.523] I> tos binary done read from storage [0000.528] I> tos: Authentication init Done [0000.532] I> parsing oem signed section of bpmp-fw-dtb header done [0000.538] I> bpmp-fw-dtb binary init read from storage [0000.543] I> tos: Authentication Finalize Done [0000.549] I> oem authentication of bpmp-fw-dtb header done [0000.555] I> bpmp-fw-dtb binary done read from storage [0000.557] I> bpmp-fw-dtb: Authentication init Done [0000.562] I> parsing oem signed section of cpubl-dtb header done [0000.568] I> cpubl-dtb binary init read from storage [0000.572] I> bpmp-fw-dtb: Authentication Finalize Done [0000.611] I> oem authentication of cpubl-dtb header done [0000.611] I> cpubl-dtb binary done read from storage [0000.612] I> cpubl-dtb: Authentication init Done [0000.614] I> parsing oem signed section of eks header done [0000.614] I> eks binary init read from storage [0000.615] I> cpubl-dtb: Authentication Finalize Done [0000.616] I> oem authentication of eks header done [0000.619] I> eks binary done read from storage [0000.624] I> eks: Authentication init Done [0000.627] I> eks: Authentication Finalize Done [0000.632] I> EKB detected (length: 0x410) @ VA:0x52700400 NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized [0001.135] I> Welcome to Cboot fmon_post initialized [0001.136] I> Cboot Version: t194-cfa2bc91 [0001.136] I> CPU-BL Params @ 0xf2820000 [0001.136] I> 0) Base:0x00000000 Size:0x00000000 [0001.140] I> 1) Base:0xf1100000 Size:0x00100000 [0001.145] I> 2) Base:0xf2000000 Size:0x00200000 [0001.149] I> 3) Base:0xf1200000 Size:0x00200000 clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized [0001.154] I> 4) Base:0xf1000000 Size:0x00100000 [0001.233] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.238] I> 6) Base:0xf3800000 Size:0x00400000 [0001.242] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.247] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.251] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.256] I> 10) Base:0xf3000000 Size:0x00800000 [0001.260] I> 11) Base:0x40000000 Size:0x00040000 [0001.264] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.269] I> 13) Base:0x40046000 Size:0x00002000 [0001.273] I> 14) Base:0x40048000 Size:0x00002000 emc_debugfs initialized dvs_debugfs initialized [0001.278] I> 15) Base:0xac000000 Size:0x00004000 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] [0001.287] I> 16) Base:0x4004a000 Size:0x00002000 [0001.337] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.342] I> 18) Base:0x4004c000 Size:0x00002000 [0001.346] I> 19) Base:0xf2200000 Size:0x00600000 [0001.351] I> 20) Base:0x4004e000 Size:0x00002000 [0001.355] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.360] I> 22) Base:0x00000000 Size:0x00000000 [0001.364] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.369] I> 24) Base:0xf6000000 Size:0x02000000 [0001.373] I> 25) Base:0x40050000 Size:0x00002000 [0001.378] I> 26) Base:0x40040000 Size:0x00006000 [0001.382] I> 27) Base:0xf1800000 Size:0x00400000 [0001.387] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.391] I> 29) Base:0xf1400000 Size:0x00400000 [0001.396] I> 30) Base:0x00000000 Size:0x00000000 [0001.400] I> 31) Base:0x00000000 Size:0x00000000 [0001.404] I> 32) Base:0xf8000000 Size:0x08000000 [0001.409] I> 33) Base:0x00000000 Size:0x00000000 [0001.413] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.418] I> 35) Base:0xab000000 Size:0x01000000 [0001.422] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.427] I> 37) Base:0xf2800000 Size:0x00800000 [0001.431] I> 38) Base:0x80000000 Size:0x20000000 [0001.436] I> 39) Base:0xb0000000 Size:0x08000000 [0001.440] I> 40) Base:0x00000000 Size:0x00000000 [0001.445] I> 41) Base:0x00000000 Size:0x00000000 [0001.449] I> 42) Base:0x00000000 Size:0x00000000 [0001.454] I> 43) Base:0x00000000 Size:0x00000000 [0001.458] I> 44) Base:0x00000000 Size:0x00000000 [0001.462] I> 45) Base:0x00000000 Size:0x00000000 [0001.467] GIC-SPI Target CPU: 0 [0001.470] Interrupts Init done [0001.473] calling constructors [0001.476] initializing heap [0001.478] I> Heap: [0xa0699b80 ... 0xab000000] [0001.483] initializing threads [0001.485] initializing timers [0001.488] creating bootstrap completion thread [0001.493] top of bootstrap2() [0001.495] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.500] initializing platform [0001.503] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.508] W> device prod register failed [0001.512] I> Bl_dtb @0xaaf00000 [0001.519] W> "plugin-manager" doesn't exist, creating [0001.520] W> "ids" doesn't exist, creating [0001.524] W> "connection" doesn't exist, creating [0001.529] W> "configs" doesn't exist, creating [0001.548] E> failed to read label property for node 227172: 13 [0001.551] E> failed to read reg property for node 227260: 13 [0001.554] E> failed to read label property for node 227312: 13 [0001.556] E> failed to read label property for node 227380: 13 [0001.558] E> failed to read label property for node 227416: 13 [0001.563] E> failed to read label property for node 227452: 13 [0001.569] E> failed to read reg property for node 227520: 13 [0001.574] E> failed to read label property for node 227572: 13 [0001.581] I> Find /i2c@3160000's alias i2c0 [0001.582] I> Reading eeprom i2c=0 address=0x50 [0001.612] I> Device at /i2c@3160000:0x50 [0001.612] I> Reading eeprom i2c=0 address=0x56 [0001.636] I> Device at /i2c@3160000:0x56 [0001.639] I> Find /i2c@3180000's alias i2c2 [0001.639] I> Reading eeprom i2c=2 address=0x54 [0001.641] E> I2C: slave not found in slaves. [0001.641] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.642] E> I2C_DEV: Failed to send register address 0x00000000. [0001.642] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.650] E> eeprom: Failed to read I2C slave device [0001.655] I> Eeprom read failed 0x3526070d [0001.659] I> Reading eeprom i2c=2 address=0x57 [0001.664] E> I2C: slave not found in slaves. [0001.668] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.675] E> I2C_DEV: Failed to send register address 0x00000000. [0001.681] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.691] E> eeprom: Failed to read I2C slave device [0001.695] I> Eeprom read failed 0x3526070d [0001.699] I> Reading eeprom i2c=2 address=0x52 [0001.704] E> I2C: slave not found in slaves. [0001.708] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.716] E> I2C_DEV: Failed to send register address 0x00000000. [0001.721] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.731] E> eeprom: Failed to read I2C slave device [0001.735] I> Eeprom read failed 0x3526070d [0001.740] I> Find /i2c@c240000's alias i2c1 [0001.743] I> Reading eeprom i2c=1 address=0x52 [0001.749] E> I2C: slave not found in slaves. [0001.752] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.760] E> I2C_DEV: Failed to send register address 0x00000000. [0001.765] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.775] E> eeprom: Retry to read I2C slave device. [0001.780] E> I2C: slave not found in slaves. [0001.784] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.791] E> I2C_DEV: Failed to send register address 0x00000000. [0001.797] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.807] E> eeprom: Failed to read I2C slave device [0001.811] I> Eeprom read failed 0x3526070d [0001.815] I> Reading eeprom i2c=1 address=0x50 [0001.820] E> I2C: slave not found in slaves. [0001.824] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.832] E> I2C_DEV: Failed to send register address 0x00000000. [0001.837] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.847] E> eeprom: Retry to read I2C slave device. [0001.852] E> I2C: slave not found in slaves. [0001.856] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.863] E> I2C_DEV: Failed to send register address 0x00000000. [0001.869] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.878] E> eeprom: Failed to read I2C slave device [0001.883] I> Eeprom read failed 0x3526070d [0001.887] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0001.892] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.903] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0001.909] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.920] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.928] W> "i2c@3160000" doesn't exist, creating [0001.931] W> "module@0x50" doesn't exist, creating [0001.936] I> Adding plugin-manager/ids/2822-0000-600=/i2c@3160000:module@0x56 [0001.943] W> "module@0x56" doesn't exist, creating [0001.949] I> Adding plugin-manager/cvm [0001.951] W> "chip-id" doesn't exist, creating [0001.955] I> Adding plugin-manager/chip-id/A02 [0001.960] I> Plugin-manager override starting [0001.965] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.973] I> node /plugin-manager/fragement-soft-wdt matches [0001.982] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.987] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.998] I> Disable plugin-manager status in FDT [0001.998] I> Plugin-manager override finished successfully [0001.999] I> gpio framework initialized [0002.002] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.009] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.016] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.023] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.032] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.037] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.043] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.051] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.059] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.065] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.073] I> fixed regulator driver initialized [0002.086] I> register 'maxim' power off handle [0002.087] I> virtual i2c enabled [0002.087] I> registered 'maxim,max20024' pmic [0002.087] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.094] I> Boot-device: eMMC [0002.097] I> Boot_device: SDMMC_BOOT instance: 3 [0002.105] I> sdmmc-3 params source = boot args [0002.106] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0002.111] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.122] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0002.127] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.138] I> sdmmc bdev is already initialized [0002.142] I> sdmmc-3 params source = boot args [0002.173] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.185] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.197] I> enabling 'vdd-hdmi-5v0' regulator [0002.203] I> regulator 'vdd-hdmi-5v0' already enabled [0002.204] I> hdmi cable connected [0002.206] W> set volts not configured for 'vdd-1v0' [0002.208] W> set volts not configured for 'vdd-1v8-hs' [0002.209] I> retrieved tmds range from prod_list_hdmi_soc [0002.213] E> invalid display type [0002.218] E> invalid display type [0002.219] E> cannot find any other nvdisp nodes [0002.235] I> edid read success [0002.247] I> edid read success [0002.247] I> width = 640, height = 480, frequency = 25174825 [0002.248] I> width = 640, height = 480, frequency = 25174825 [0002.248] I> width = 1920, height = 1080, frequency = 148500000 [0002.249] I> width = 1920, height = 1080, frequency = 148500000 [0002.249] I> width = 1920, height = 1080, frequency = 148351648 [0002.253] I> width = 1280, height = 720, frequency = 74175824 [0002.259] I> width = 720, height = 480, frequency = 26973026 [0002.264] I> width = 640, height = 480, frequency = 25174825 [0002.270] I> width = 1920, height = 1080, frequency = 148351648 [0002.276] I> width = 720, height = 576, frequency = 26973026 [0002.281] I> width = 1280, height = 720, frequency = 74175824 [0002.287] I> width = 1920, height = 1080, frequency = 148351648 [0002.293] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.303] I> hdmi_enable, starting HDMI initialisation [0002.308] I> hdmi_enable, HDMI initialisation complete [0002.318] I> Load in CBoot Boot Options partition and parse it [0002.324] E> Error -9 when finding node with path /boot-configuration [0002.325] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.328] I> Using default boot order [0002.331] I> boot-dev-order :- [0002.334] I> 1.sd [0002.336] I> 2.usb [0002.338] I> 3.nvme [0002.340] I> 4.emmc [0002.342] I> 5.net [0002.344] I> Hit any key to stop autoboot:4321 [0004.351] initializing target [0004.351] calling apps_init() [0004.352] starting app kernel_boot_app [0004.371] I> found decompressor handler: lz4-legacy [0004.372] I> decompressing BMP blob ... [0004.382] I> Kernel type = Normal [0004.383] I> ########## SD (0) boot ########## [0004.383] I> No sdcard [0004.383] I> -0 params source = [0004.384] E> Blockdev open: exit error [0004.384] E> SD boot failed, err: 724238353 [0004.384] I> ########## USB (0) boot ########## [0004.389] W> No valid slot number is found in scratch register [0004.390] W> Return default slot: _a [0004.397] I> Validate XUSB-FW ... [0004.398] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.402] I> Encryption fuse is not ON [0004.405] I> USB Firmware Version: 60.09 release [0004.465] I> regulator of usb2-0 already enabled [0004.473] I> regulator of usb2-1 already enabled [0004.481] I> regulator of usb2-2 already enabled [0004.491] I> enabling 'vdd-5v-sata' regulator [0005.559] I> USB 2.0 port 2 new high-speed USB device detected [0005.560] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa4ad2000, cmd_ring.dma = 0xa4ad20c0 [0005.661] I> Start to enumerate device [0005.662] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa4ad2000, cmd_ring.dma = 0xa4ad20c0 [0005.667] I> [0005.667] I> Enumerated USB Device 0409:005a [0005.668] I> [0005.669] I> Hub: [0005.669] I> Downstream ports : 4 [0005.669] I> Power switching : Ganged [0005.670] I> Compound device : No [0005.670] I> Over-current protection : Global [0005.674] I> Hub avg delay : 4 ns [0005.678] I> Enable hub ports [0005.686] I> Device detected on port 1 [0005.688] I> Device detected on port 2 [0006.701] I> Reset port 1 [0006.755] I> Port 1 device is low speed, skip enumeration [0006.758] I> Reset port 2 [0006.812] I> Port 2 device is low speed, skip enumeration [0006.812] E> Enumerated device doesn't belong to MSD class or protocol is not bulk-only!! [0006.813] E> Class = 9, Protocol = 0 [0006.813] E> USBMSD: Failed to initialize Enumerated USB device either not an MSD device or supported protoco[0006.814] E> USBMSD: Failed to open usbmsd open, 0. [0006.818] E> Error opening USBMSD driver 0, err: 7c7c0312 [0006.823] W> Failed to initialize device 5-0 [0006.827] E> USB boot failed, err: 2088502034 [0006.832] I> ########## NVME (0) boot ########## [0006.836] I> Initializing nvme device instance 0 [0006.840] I> Initializing nvme controller [0006.844] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0006.851] I> vpcie3v3-supply not found [0006.854] I> vpcie12v-supply not found [0006.858] W> Failed to get nvidia,plat-gpios [0006.862] I> tegrabl_pcie_soc_preinit: (0): [0006.866] I> Unpowergate [0006.869] I> tegrabl_car_clk_disable(0) ... [0006.872] I> tegrabl_car_rst_set(CORE, 0) ... [0006.877] I> tegrabl_car_rst_set(APB, 0) ... [0006.881] I> tegrabl_car_clk_enable(0) ... [0006.885] I> tegrabl_car_rst_clear(APB, 0) ... [0006.889] I> tegrabl_set_ctrl_state(0) [0006.893] I> CLR PCIE_APB:6 [0006.895] I> tegrabl_pcie_soc_init: (0): [0006.899] I> APPL initialization ... [0006.902] I> poweron phys [0006.905] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0006.911] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0006.917] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0006.922] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0006.927] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0008.033] C> Failed to link up controller-0 [0008.033] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0008.034] I> Failed to initialize SoC Host PCIe controller [0008.034] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x12 [0008.035] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.035] W> Failed to open NVME-0, err = 80800612 [0008.040] W> Failed to initialize device 10-0 [0008.044] E> NVME (0) boot failed, err: 0x80800612 [0008.048] I> ########## NVME (1) boot ########## [0008.053] I> Initializing nvme device instance 1 [0008.057] I> Initializing nvme controller [0008.061] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0008.068] I> vpcie3v3-supply not found [0008.071] I> vpcie12v-supply not found [0008.075] W> Failed to get nvidia,plat-gpios [0008.079] I> tegrabl_pcie_soc_preinit: (1): [0008.083] I> Unpowergate [0008.085] I> tegrabl_car_clk_disable(1) ... [0008.089] I> tegrabl_car_rst_set(CORE, 1) ... [0008.094] I> tegrabl_car_rst_set(APB, 1) ... [0008.098] I> tegrabl_car_clk_enable(1) ... [0008.102] I> tegrabl_car_rst_clear(APB, 1) ... [0008.106] I> tegrabl_set_ctrl_state(1) [0008.109] I> CLR PCIE_APB:6 [0008.112] I> tegrabl_pcie_soc_init: (1): [0008.116] I> APPL initialization ... [0008.119] I> poweron phys [0008.122] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0008.128] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0008.235] I> PCIe controller-1 link is up [0008.235] I> tegra_pcie_info[1].cfg0_base = 0x30000000 [0008.236] I> tegra_pcie_info[1].cfg1_base = 0x30020000 [0008.236] I> tegra_pcie_info[1].atu_dma_base = 0x30040000 [0008.236] I> tegra_pcie_bus[1].mem = 0x30200000 [0008.237] I> Scanning busnr: 0 devfn: 0 [0008.237] I> PCIe IDs: 0x1ad210de [0008.240] I> PCIe RID_CC: 0x60400a1 [0008.243] I> Scanning busnr: 1 devfn: 0 [0008.247] I> PCIe IDs: 0x91711b4b [0008.250] I> PCIe RID_CC: 0x1060113 [0008.254] I> PCI Config: I/O=0x30100000, Memory=0x30200000 [0008.259] I> IO bar_num=0 bar=0x30100000 [0008.263] I> IO bar_num=1 bar=0x30100008 [0008.267] I> IO bar_num=2 bar=0x30100010 [0008.270] I> IO bar_num=3 bar=0x30100018 [0008.274] I> IO bar_num=4 bar=0x30100020 [0008.278] I> MEM bar_num=5 bar=0x30200000 [0008.282] I> Number of PCIe devices detected: 2 [0008.286] E> tegrabl_nvme_init: Failed tegrabl_pcie_get_dev(1); error=0x0 [0008.293] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.299] W> Failed to open NVME-1, err = 80800612 [0008.304] W> Failed to initialize device 10-1 [0008.308] E> NVME (1) boot failed, err: 0x80800612 [0008.313] I> ########## NVME (2) boot ########## [0008.317] I> Initializing nvme device instance 2 [0008.322] I> Initializing nvme controller [0008.326] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0008.332] I> vpcie3v3-supply not found [0008.335] I> vpcie12v-supply not found [0008.339] W> Failed to get nvidia,plat-gpios [0008.343] I> tegrabl_pcie_soc_preinit: (2): [0008.347] I> Unpowergate [0008.350] I> tegrabl_car_clk_disable(2) ... [0008.354] I> tegrabl_car_rst_set(CORE, 2) ... [0008.358] I> tegrabl_car_rst_set(APB, 2) ... [0008.362] I> tegrabl_car_clk_enable(2) ... [0008.366] I> tegrabl_car_rst_clear(APB, 2) ... [0008.370] I> tegrabl_set_ctrl_state(2) [0008.374] I> CLR PCIE_APB:6 [0008.376] I> tegrabl_pcie_soc_init: (2): [0008.380] I> APPL initialization ... [0008.383] I> poweron phys [0008.386] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0008.392] I> tegrabl_power_on_phy: controller 2 not available [0008.398] E> Failed to power on phy on controller-2 [0008.403] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0008.408] I> Failed to initialize SoC Host PCIe controller [0008.413] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0008.419] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0008.426] W> Failed to open NVME-2, err = 80800601 [0008.430] W> Failed to initialize device 10-2 [0008.435] E> NVME (2) boot failed, err: 0x80800601 [0008.439] I> ########## NVME (3) boot ########## [0008.444] I> Initializing nvme device instance 3 [0008.448] I> Initializing nvme controller [0008.452] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0008.458] I> vpcie3v3-supply not found [0008.462] I> vpcie12v-supply not found [0008.466] W> Failed to get nvidia,plat-gpios [0008.470] I> tegrabl_pcie_soc_preinit: (3): [0008.474] I> Unpowergate [0008.476] I> tegrabl_car_clk_disable(3) ... [0008.480] I> tegrabl_car_rst_set(CORE, 3) ... [0008.484] I> tegrabl_car_rst_set(APB, 3) ... [0008.488] I> tegrabl_car_clk_enable(3) ... [0008.492] I> tegrabl_car_rst_clear(APB, 3) ... [0008.497] I> tegrabl_set_ctrl_state(3) [0008.500] I> CLR PCIE_APB:6 [0008.503] I> tegrabl_pcie_soc_init: (3): [0008.507] I> APPL initialization ... [0008.510] I> poweron phys [0008.513] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0008.519] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0009.624] C> Failed to link up controller-3 [0009.625] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0009.625] I> Failed to initialize SoC Host PCIe controller [0009.626] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0009.626] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0009.627] W> Failed to open NVME-3, err = 80800612 [0009.631] W> Failed to initialize device 10-3 [0009.636] E> NVME (3) boot failed, err: 0x80800612 [0009.640] I> ########## NVME (4) boot ########## [0009.645] I> Initializing nvme device instance 4 [0009.649] I> Initializing nvme controller [0009.654] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0009.659] I> vpcie3v3-supply not found [0009.663] I> vpcie12v-supply not found [0009.666] W> Failed to get nvidia,plat-gpios [0009.671] I> tegrabl_pcie_soc_preinit: (4): [0009.675] I> Unpowergate [0009.677] I> tegrabl_car_clk_disable(4) ... [0009.681] I> tegrabl_car_rst_set(CORE, 4) ... [0009.685] I> tegrabl_car_rst_set(APB, 4) ... [0009.689] I> tegrabl_car_clk_enable(4) ... [0009.693] I> tegrabl_car_rst_clear(APB, 4) ... [0009.698] I> tegrabl_set_ctrl_state(4) [0009.701] I> CLR PCIE_APB:6 [0009.704] I> tegrabl_pcie_soc_init: (4): [0009.708] I> APPL initialization ... [0009.711] I> poweron phys [0009.714] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0009.720] I> tegrabl_power_on_phy: controller 4 not available [0009.725] E> Failed to power on phy on controller-4 [0009.730] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0009.735] I> Failed to initialize SoC Host PCIe controller [0009.740] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0009.747] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0009.753] W> Failed to open NVME-4, err = 80800601 [0009.758] W> Failed to initialize device 10-4 [0009.762] E> NVME (4) boot failed, err: 0x80800601 [0009.767] I> ########## NVME (5) boot ########## [0009.771] I> Initializing nvme device instance 5 [0009.776] I> Initializing nvme controller [0009.780] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0009.786] I> i=0, reg_phandle=0x1b [0009.792] I> reg_voltage=3300000 [0009.792] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1b, 3300000) [0009.804] I> enabling 'vdd-3v3-pcie' regulator [0009.805] I> i=1, reg_phandle=0x1c [0009.809] I> reg_voltage=1200000 [0009.810] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1c, 1200000) [0009.822] I> enabling 'vdd-12v-pcie' regulator [0009.823] I> tegrabl_pcie_soc_preinit: (5): [0009.826] I> Unpowergate [0009.828] I> tegrabl_car_clk_disable(5) ... [0009.832] I> tegrabl_car_rst_set(CORE, 5) ... [0009.836] I> tegrabl_car_rst_set(APB, 5) ... [0009.841] I> tegrabl_car_clk_enable(5) ... [0009.845] I> tegrabl_car_rst_clear(APB, 5) ... [0009.849] I> tegrabl_set_ctrl_state(5) [0009.852] I> CLR PCIE_APB:6 [0009.855] I> tegrabl_pcie_soc_init: (5): [0009.859] I> APPL initialization ... [0009.862] I> poweron phys [0009.865] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0009.871] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0009.876] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0009.882] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0009.887] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0009.892] I> tegrabl_power_on_phy: power on phy @0x3ef0000 [0009.898] I> tegrabl_power_on_phy: power on phy @0x3f00000 [0009.903] I> tegrabl_power_on_phy: power on phy @0x3f10000 [0009.908] I> tegrabl_power_on_phy: power on phy @0x3f20000 [0011.014] C> Failed to link up controller-5 [0011.014] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0011.015] I> Failed to initialize SoC Host PCIe controller [0011.015] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0011.016] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0011.016] W> Failed to open NVME-5, err = 80800612 [0011.021] W> Failed to initialize device 10-5 [0011.025] E> NVME (5) boot failed, err: 0x80800612 [0011.030] I> ########## Fixed storage boot ########## [0011.035] I> Loading kernel-bootctrl from partition [0011.039] I> Loading partition kernel-bootctrl at 0xa4b30000 from device(0x1) [0011.052] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0011.053] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0011.066] I> Already published: 00010003 [0011.067] I> Look for boot partition [0011.067] I> Fallback: assuming 0th partition is boot partition [0011.073] I> Detect filesystem [0011.100] I> Loading extlinux.conf ... [0011.101] I> Loading extlinux.conf binary from rootfs ... [0011.101] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0011.156] I> Loading extlinux.conf sig file from rootfs ... [0011.156] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig [0011.193] I> Validate extlinux.conf ... [0011.193] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0011.194] I> Encryption fuse is not ON [0011.194] I> L4T boot options [0011.195] I> [1]: "primary kernel" [0011.195] I> Enter choice: [0014.196] I> Continuing with default option: 1 [0014.196] I> Loading kernel ... [0014.196] I> Loading kernel binary from rootfs ... [0014.197] I> rootfs path: /sdmmc_user/boot/Image [0014.422] I> Loading kernel sig file from rootfs ... [0014.423] I> rootfs path: /sdmmc_user/boot/Image.sig [0014.447] I> overload load_size to 34484232 (from 34484240) [0014.448] I> Validate kernel ... [0014.448] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0014.762] I> Encryption fuse is not ON [0014.793] I> Loading kernel-dtb ... [0014.794] I> No kernel-dtb binary path [0014.794] I> Continue to load from partition ... [0014.794] W> No valid slot number is found in scratch register [0014.795] W> Return default slot: _a [0014.795] I> A/B: bin_type (38) slot 0 [0014.795] I> Loading kernel-dtb from partition [0014.797] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0014.812] I> Validate kernel-dtb ... [0014.812] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0014.816] I> Encryption fuse is not ON [0014.819] I> Loading ramdisk from rootfs ... [0014.821] I> Loading ramdisk binary from rootfs ... [0014.826] I> rootfs path: /sdmmc_user/boot/initrd [0014.901] I> Loading ramdisk sig file from rootfs ... [0014.901] I> rootfs path: /sdmmc_user/boot/initrd.sig [0014.932] I> overload load_size to 7238344 (from 7238352) [0014.932] I> Validate ramdisk ... [0014.932] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0014.999] I> Encryption fuse is not ON [0015.012] I> Kernel hdr @0xa4b30000 [0015.013] I> Kernel dtb @0x90000000 [0015.013] I> decompressor handler not found [0015.013] I> Copying kernel image (34484232 bytes) from 0xa4b30000 to 0x80080000 ... [0015.024] I> Done [0015.025] I> Updated bpmp info to DTB [0015.026] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0015.026] I> Updated initrd info to DTB [0015.027] W> WARN: Fail to override "console=none" in commandline [0015.027] I> Active rootfs suffix: [0015.029] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0015.036] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0015.043] W> No valid slot number is found in scratch register [0015.049] W> Return default slot: _a [0015.052] I> Active slot suffix: [0015.056] I> add_boot_slot_suffix: slot_suffix = [0015.060] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06aa000 lut_mem=0x2008@0xa06a5000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0015.090] I> Updated bootarg info to DTB [0015.093] W> MAC addr invalid! [0015.096] E> Failed to get WIFI MAC address [0015.100] W> MAC addr invalid! [0015.103] E> Failed to get Bluetooth MAC address [0015.108] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:8f:b2 [0015.114] W> "plugin-manager" doesn't exist, creating [0015.119] I> Adding /chosen/plugin-manager/cvm [0015.123] W> "chip-id" doesn't exist, creating [0015.127] I> Adding /chosen/plugin-manager/chip-id [0015.132] W> "configs" doesn't exist, creating [0015.136] I> Adding /chosen/plugin-manager/configs [0015.141] W> "ids" doesn't exist, creating [0015.145] I> Adding /chosen/plugin-manager/ids [0015.149] W> "odm-data" doesn't exist, creating [0015.153] I> Adding /chosen/plugin-manager/odm-data [0015.161] W> "memory" doesn't exist, creating [0015.163] I> [0] START: 0x80000000, END: 0xac000000 [0015.167] I> [1] START: 0xac004000, END: 0xf0ad0000 [0015.172] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0015.176] I> dram_block larger than 80000000 [0015.181] I> [3] START: 0x100000000, END: 0x880000000 [0015.185] I> added [base:0x80000000, size:0x2c000000] to /memory [0015.191] I> added [base:0xac200000, size:0x44800000] to /memory [0015.197] I> added [base:0x100000000, size:0x780000000] to /memory [0015.204] I> Updated memory info to DTB [0015.207] E> add_disp_param: failed to get display params for du=1 [0015.213] W> "reset" doesn't exist, creating [0015.218] I> Adding ecid(000000016459e5871000000008028040) to DT [0015.223] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0015.228] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0015.232] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0015.237] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0015.242] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0015.246] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0015.251] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0015.256] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0015.262] W> "misc-data" doesn't exist, creating [0015.265] I> Boot-device: eMMC [0015.268] I> Add boot-sdmmc to plugin-manager/misc-data [0015.273] I> Add storage-sdmmc to plugin-manager/misc-data [0015.279] W> Unknown storage device [0015.282] I> Add serial number:1420820014791 as DT property [0015.289] I> Plugin-manager override starting [0015.292] I> node /plugin-manager/fragement-tegra-wdt-en matches [0015.299] I> node /plugin-manager/fragement-soft-wdt matches [0015.307] I> node /plugin-manager/fragment-pcie-c5-rp matches [0015.311] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0015.324] I> Disable plugin-manager status in FDT [0015.324] I> Plugin-manager override finished successfully [0015.325] I> tegrabl_load_kernel_and_dtb: Done [0015.351] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06aa000 [ 0.000000] Found lut_mem: 00002008@a06a5000 WARNING: pll_d3 has no dyn ramp [ 6.535274] cgroup: cgroup2: unknown option "nsdelegate" [ 7.728004] using random self ethernet address [ 7.728177] using random host ethernet address [ 7.880367] random: crng init done [ 7.880521] random: 7 urandom warning(s) missed due to ratelimiting [ 8.269098] using random self ethernet address [ 8.269281] using random host ethernet address [ 8.821857] CPU4: shutdown [ 8.870226] CPU5: shutdown [ 8.950079] CPU6: shutdown [ 9.058473] CPU7: shutdown [ 11.558711] Bridge firewalling registered Ubuntu 18.04.5 LTS xview-desktop ttyTCU0 xview-desktop login: [ 170.452729] watchdog: watchdog0: watchdog did not stop! [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.7-t194-41334769-98030a79) [0000.069] I> Boot-mode: Coldboot [0000.071] I> Chip revision : A02 [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x2 [0000.089] I> rst_source : 0x2 [0000.091] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 43500 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.174] I> Sdmmc: HS400 mode enabled [0000.178] I> ECC region[0]: Start:0x0, End:0x0 [0000.182] I> ECC region[1]: Start:0x0, End:0x0 [0000.186] I> ECC region[2]: Start:0x0, End:0x0 [0000.191] I> ECC region[3]: Start:0x0, End:0x0 [0000.195] I> ECC region[4]: Start:0x0, End:0x0 [0000.199] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.205] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.209] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.213] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.218] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.223] E> FAILED: Thermal config [0000.231] E> FAILED: MEMIO rail config [0000.249] I> Boot-device: eMMC [0000.259] I> sdmmc bdev is already initialized [0000.333] I> MB1 done main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init [0000.341] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-938a8cd8) [0000.342] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.342] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.343] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.349] W> device prod register failed [0000.352] I> Boot-device: eMMC [0000.355] I> Boot_device: SDMMC_BOOT instance: 3 [0000.361] I> sdmmc-3 params source = boot args [0000.364] I> sdmmc bdev is already initialized [0000.368] I> sdmmc-3 params source = boot args [0000.377] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.383] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.384] W> No valid slot number is found in scratch register [0000.389] W> Return default slot: _a [0000.393] I> Active Boot chain : 0 [0000.396] I> parsing oem signed section of bpmp-fw header done [0000.402] I> bpmp-fw binary init read from storage [0000.407] I> oem authentication of bpmp-fw header done [0000.413] I> bpmp-fw binary done read from storage [0000.416] I> bpmp-fw: Authentication init Done [0000.420] I> parsing oem signed section of cpubl header done [0000.426] I> cpubl binary init read from storage [0000.430] I> bpmp-fw: Authentication Finalize Done [0000.435] I> oem authentication of cpubl header done [0000.439] I> cpubl binary done read from storage [0000.444] I> cpubl: Authentication init Done [0000.450] I> parsing oem signed section of rce header done [0000.453] I> rce binary init read from storage [0000.458] I> Relocating BR-BCT [0000.461] I> cpubl: Authentication Finalize Done [0000.465] I> oem authentication of rce header done [0000.470] I> rce binary done read from storage [0000.474] I> rce: Authentication init Done [0000.479] I> parsing oem signed section of ape header done [0000.483] I> ape binary init read from storage [0000.488] I> rce: Authentication Finalize Done [0000.492] I> oem authentication of ape header done [0000.496] I> ape binary done read from storage [0000.501] I> ape: Authentication init Done [0000.506] I> parsing oem signed section of tos header done [0000.510] I> tos binary init read from storage [0000.514] I> ape: Authentication Finalize Done [0000.519] I> oem authentication of tos header done [0000.523] I> tos binary done read from storage [0000.528] I> tos: Authentication init Done [0000.532] I> parsing oem signed section of bpmp-fw-dtb header done [0000.538] I> bpmp-fw-dtb binary init read from storage [0000.542] I> tos: Authentication Finalize Done [0000.549] I> oem authentication of bpmp-fw-dtb header done [0000.555] I> bpmp-fw-dtb binary done read from storage [0000.557] I> bpmp-fw-dtb: Authentication init Done [0000.562] I> parsing oem signed section of cpubl-dtb header done [0000.568] I> cpubl-dtb binary init read from storage [0000.572] I> bpmp-fw-dtb: Authentication Finalize Done [0000.611] I> oem authentication of cpubl-dtb header done [0000.611] I> cpubl-dtb binary done read from storage [0000.612] I> cpubl-dtb: Authentication init Done [0000.614] I> parsing oem signed section of eks header done [0000.614] I> eks binary init read from storage [0000.615] I> cpubl-dtb: Authentication Finalize Done [0000.616] I> oem authentication of eks header done [0000.619] I> eks binary done read from storage [0000.623] I> eks: Authentication init Done [0000.627] I> eks: Authentication Finalize Done [0000.632] I> EKB detected (length: 0x410) @ VA:0x52700400 NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:32, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized [0001.136] I> Welcome to Cboot fmon_post initialized [0001.136] I> Cboot Version: t194-cfa2bc91 [0001.136] I> CPU-BL Params @ 0xf2820000 [0001.137] I> 0) Base:0x00000000 Size:0x00000000 [0001.140] I> 1) Base:0xf1100000 Size:0x00100000 [0001.145] I> 2) Base:0xf2000000 Size:0x00200000 [0001.149] I> 3) Base:0xf1200000 Size:0x00200000 clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized [0001.154] I> 4) Base:0xf1000000 Size:0x00100000 [0001.233] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.237] I> 6) Base:0xf3800000 Size:0x00400000 [0001.242] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.246] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.251] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.255] I> 10) Base:0xf3000000 Size:0x00800000 [0001.260] I> 11) Base:0x40000000 Size:0x00040000 [0001.264] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.269] I> 13) Base:0x40046000 Size:0x00002000 [0001.273] I> 14) Base:0x40048000 Size:0x00002000 emc_debugfs initialized dvs_debugfs initialized [0001.278] I> 15) Base:0xac000000 Size:0x00004000 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] [0001.287] I> 16) Base:0x4004a000 Size:0x00002000 [0001.337] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.342] I> 18) Base:0x4004c000 Size:0x00002000 [0001.346] I> 19) Base:0xf2200000 Size:0x00600000 [0001.351] I> 20) Base:0x4004e000 Size:0x00002000 [0001.355] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.360] I> 22) Base:0x00000000 Size:0x00000000 [0001.364] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.368] I> 24) Base:0xf6000000 Size:0x02000000 [0001.373] I> 25) Base:0x40050000 Size:0x00002000 [0001.377] I> 26) Base:0x40040000 Size:0x00006000 [0001.382] I> 27) Base:0xf1800000 Size:0x00400000 [0001.386] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.391] I> 29) Base:0xf1400000 Size:0x00400000 [0001.395] I> 30) Base:0x00000000 Size:0x00000000 [0001.400] I> 31) Base:0x00000000 Size:0x00000000 [0001.404] I> 32) Base:0xf8000000 Size:0x08000000 [0001.409] I> 33) Base:0x00000000 Size:0x00000000 [0001.413] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.418] I> 35) Base:0xab000000 Size:0x01000000 [0001.422] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.427] I> 37) Base:0xf2800000 Size:0x00800000 [0001.431] I> 38) Base:0x80000000 Size:0x20000000 [0001.435] I> 39) Base:0xb0000000 Size:0x08000000 [0001.440] I> 40) Base:0x00000000 Size:0x00000000 [0001.444] I> 41) Base:0x00000000 Size:0x00000000 [0001.449] I> 42) Base:0x00000000 Size:0x00000000 [0001.453] I> 43) Base:0x00000000 Size:0x00000000 [0001.458] I> 44) Base:0x00000000 Size:0x00000000 [0001.462] I> 45) Base:0x00000000 Size:0x00000000 [0001.467] GIC-SPI Target CPU: 0 [0001.470] Interrupts Init done [0001.473] calling constructors [0001.475] initializing heap [0001.478] I> Heap: [0xa0699b80 ... 0xab000000] [0001.482] initializing threads [0001.485] initializing timers [0001.488] creating bootstrap completion thread [0001.492] top of bootstrap2() [0001.495] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.500] initializing platform [0001.503] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.508] W> device prod register failed [0001.512] I> Bl_dtb @0xaaf00000 [0001.518] W> "plugin-manager" doesn't exist, creating [0001.520] W> "ids" doesn't exist, creating [0001.524] W> "connection" doesn't exist, creating [0001.528] W> "configs" doesn't exist, creating [0001.539] E> failed to read label property for node 227172: 13 [0001.542] E> failed to read reg property for node 227260: 13 [0001.546] E> failed to read label property for node 227312: 13 [0001.551] E> failed to read label property for node 227380: 13 [0001.557] E> failed to read label property for node 227416: 13 [0001.563] E> failed to read label property for node 227452: 13 [0001.568] E> failed to read reg property for node 227520: 13 [0001.574] E> failed to read label property for node 227572: 13 [0001.581] I> Find /i2c@3160000's alias i2c0 [0001.582] I> Reading eeprom i2c=0 address=0x50 [0001.611] I> Device at /i2c@3160000:0x50 [0001.612] I> Reading eeprom i2c=0 address=0x56 [0001.636] I> Device at /i2c@3160000:0x56 [0001.638] I> Find /i2c@3180000's alias i2c2 [0001.639] I> Reading eeprom i2c=2 address=0x54 [0001.640] E> I2C: slave not found in slaves. [0001.640] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.641] E> I2C_DEV: Failed to send register address 0x00000000. [0001.642] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.650] E> eeprom: Failed to read I2C slave device [0001.655] I> Eeprom read failed 0x3526070d [0001.659] I> Reading eeprom i2c=2 address=0x57 [0001.663] E> I2C: slave not found in slaves. [0001.667] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.675] E> I2C_DEV: Failed to send register address 0x00000000. [0001.681] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.690] E> eeprom: Failed to read I2C slave device [0001.695] I> Eeprom read failed 0x3526070d [0001.699] I> Reading eeprom i2c=2 address=0x52 [0001.703] E> I2C: slave not found in slaves. [0001.707] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.715] E> I2C_DEV: Failed to send register address 0x00000000. [0001.721] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.730] E> eeprom: Failed to read I2C slave device [0001.735] I> Eeprom read failed 0x3526070d [0001.740] I> Find /i2c@c240000's alias i2c1 [0001.743] I> Reading eeprom i2c=1 address=0x52 [0001.749] E> I2C: slave not found in slaves. [0001.751] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.759] E> I2C_DEV: Failed to send register address 0x00000000. [0001.765] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.774] E> eeprom: Retry to read I2C slave device. [0001.779] E> I2C: slave not found in slaves. [0001.783] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.791] E> I2C_DEV: Failed to send register address 0x00000000. [0001.797] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.806] E> eeprom: Failed to read I2C slave device [0001.811] I> Eeprom read failed 0x3526070d [0001.815] I> Reading eeprom i2c=1 address=0x50 [0001.819] E> I2C: slave not found in slaves. [0001.823] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.831] E> I2C_DEV: Failed to send register address 0x00000000. [0001.837] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.846] E> eeprom: Retry to read I2C slave device. [0001.851] E> I2C: slave not found in slaves. [0001.855] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.863] E> I2C_DEV: Failed to send register address 0x00000000. [0001.869] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.878] E> eeprom: Failed to read I2C slave device [0001.883] I> Eeprom read failed 0x3526070d [0001.887] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0001.892] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.903] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0001.908] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.919] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.927] W> "i2c@3160000" doesn't exist, creating [0001.931] W> "module@0x50" doesn't exist, creating [0001.936] I> Adding plugin-manager/ids/2822-0000-600=/i2c@3160000:module@0x56 [0001.943] W> "module@0x56" doesn't exist, creating [0001.948] I> Adding plugin-manager/cvm [0001.951] W> "chip-id" doesn't exist, creating [0001.955] I> Adding plugin-manager/chip-id/A02 [0001.960] I> Plugin-manager override starting [0001.964] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.974] I> node /plugin-manager/fragement-soft-wdt matches [0001.981] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.986] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.995] I> Disable plugin-manager status in FDT [0001.996] I> Plugin-manager override finished successfully [0001.997] I> gpio framework initialized [0002.002] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.009] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.015] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.023] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.031] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.037] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.043] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.051] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.058] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.065] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.073] I> fixed regulator driver initialized [0002.084] I> register 'maxim' power off handle [0002.084] I> virtual i2c enabled [0002.085] I> registered 'maxim,max20024' pmic [0002.087] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.094] I> Boot-device: eMMC [0002.096] I> Boot_device: SDMMC_BOOT instance: 3 [0002.105] I> sdmmc-3 params source = boot args [0002.105] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0002.110] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.121] I> create_pm_ids: id: 2822-0000-600-G, len: 15 [0002.127] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.138] I> sdmmc bdev is already initialized [0002.142] I> sdmmc-3 params source = boot args [0002.193] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.206] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.217] I> enabling 'vdd-hdmi-5v0' regulator [0002.223] I> regulator 'vdd-hdmi-5v0' already enabled [0002.224] I> hdmi cable connected [0002.226] W> set volts not configured for 'vdd-1v0' [0002.228] W> set volts not configured for 'vdd-1v8-hs' [0002.229] I> retrieved tmds range from prod_list_hdmi_soc [0002.234] E> invalid display type [0002.238] E> invalid display type [0002.239] E> cannot find any other nvdisp nodes [0002.255] I> edid read success [0002.267] I> edid read success [0002.268] I> width = 640, height = 480, frequency = 25174825 [0002.268] I> width = 640, height = 480, frequency = 25174825 [0002.269] I> width = 1920, height = 1080, frequency = 148500000 [0002.269] I> width = 1920, height = 1080, frequency = 148500000 [0002.269] I> width = 1920, height = 1080, frequency = 148351648 [0002.274] I> width = 1280, height = 720, frequency = 74175824 [0002.279] I> width = 720, height = 480, frequency = 26973026 [0002.285] I> width = 640, height = 480, frequency = 25174825 [0002.290] I> width = 1920, height = 1080, frequency = 148351648 [0002.296] I> width = 720, height = 576, frequency = 26973026 [0002.301] I> width = 1280, height = 720, frequency = 74175824 [0002.307] I> width = 1920, height = 1080, frequency = 148351648 [0002.313] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.323] I> hdmi_enable, starting HDMI initialisation [0002.328] I> hdmi_enable, HDMI initialisation complete [0002.338] I> Load in CBoot Boot Options partition and parse it [0002.344] E> Error -9 when finding node with path /boot-configuration [0002.345] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.348] I> Using default boot order [0002.352] I> boot-dev-order :- [0002.355] I> 1.sd [0002.356] I> 2.usb [0002.358] I> 3.nvme [0002.360] I> 4.emmc [0002.362] I> 5.net [0002.364] I> Hit any key to stop autoboot:4321 [0004.372] initializing target [0004.372] calling apps_init() [0004.373] starting app kernel_boot_app [0004.392] I> found decompressor handler: lz4-legacy [0004.393] I> decompressing BMP blob ... [0004.404] I> Kernel type = Normal [0004.404] I> ########## SD (0) boot ########## [0004.405] I> No sdcard [0004.405] I> -0 params source = [0004.405] E> Blockdev open: exit error [0004.405] E> SD boot failed, err: 724238353 [0004.406] I> ########## USB (0) boot ########## [0004.411] W> No valid slot number is found in scratch register [0004.411] W> Return default slot: _a [0004.419] I> Validate XUSB-FW ... [0004.419] I> T19x: Authenticate XUSB-FW (bin_type: 11), max size 0x28000 [0004.423] I> Encryption fuse is not ON [0004.426] I> USB Firmware Version: 60.09 release [0004.486] I> regulator of usb2-0 already enabled [0004.494] I> regulator of usb2-1 already enabled [0004.503] I> regulator of usb2-2 already enabled [0004.513] I> enabling 'vdd-5v-sata' regulator [0005.582] I> USB 2.0 port 2 new high-speed USB device detected [0005.584] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa4ad2000, cmd_ring.dma = 0xa4ad20c0 [0005.684] I> Start to enumerate device [0005.686] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa4ad2000, cmd_ring.dma = 0xa4ad20c0 [0005.691] I> [0005.691] I> Enumerated USB Device 0409:005a [0005.691] I> [0005.692] I> Hub: [0005.692] I> Downstream ports : 4 [0005.693] I> Power switching : Ganged [0005.693] I> Compound device : No [0005.693] I> Over-current protection : Global [0005.698] I> Hub avg delay : 4 ns [0005.702] I> Enable hub ports [0005.710] I> Device detected on port 1 [0005.711] I> Device detected on port 2 [0006.724] I> Reset port 1 [0006.778] I> Port 1 device is low speed, skip enumeration [0006.781] I> Reset port 2 [0006.835] I> Port 2 device is low speed, skip enumeration [0006.836] E> Enumerated device doesn't belong to MSD class or protocol is not bulk-only!! [0006.836] E> Class = 9, Protocol = 0 [0006.837] E> USBMSD: Failed to initialize Enumerated USB device either not an MSD device or supported protoco[0006.837] E> USBMSD: Failed to open usbmsd open, 0. [0006.841] E> Error opening USBMSD driver 0, err: 7c7c0312 [0006.847] W> Failed to initialize device 5-0 [0006.851] E> USB boot failed, err: 2088502034 [0006.855] I> ########## NVME (0) boot ########## [0006.859] I> Initializing nvme device instance 0 [0006.864] I> Initializing nvme controller [0006.868] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0006.874] I> vpcie3v3-supply not found [0006.878] I> vpcie12v-supply not found [0006.881] W> Failed to get nvidia,plat-gpios [0006.885] I> tegrabl_pcie_soc_preinit: (0): [0006.889] I> Unpowergate [0006.892] I> tegrabl_car_clk_disable(0) ... [0006.896] I> tegrabl_car_rst_set(CORE, 0) ... [0006.900] I> tegrabl_car_rst_set(APB, 0) ... [0006.904] I> tegrabl_car_clk_enable(0) ... [0006.908] I> tegrabl_car_rst_clear(APB, 0) ... [0006.912] I> tegrabl_set_ctrl_state(0) [0006.916] I> CLR PCIE_APB:6 [0006.919] I> tegrabl_pcie_soc_init: (0): [0006.922] I> APPL initialization ... [0006.926] I> poweron phys [0006.928] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14180000 [0006.935] I> tegrabl_power_on_phy: power on phy @0x3e30000 [0006.940] I> tegrabl_power_on_phy: power on phy @0x3e40000 [0006.945] I> tegrabl_power_on_phy: power on phy @0x3e50000 [0006.951] I> tegrabl_power_on_phy: power on phy @0x3e60000 [0008.056] C> Failed to link up controller-0 [0008.057] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0008.057] I> Failed to initialize SoC Host PCIe controller [0008.057] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(0); error=0x12 [0008.058] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.058] W> Failed to open NVME-0, err = 80800612 [0008.063] W> Failed to initialize device 10-0 [0008.067] E> NVME (0) boot failed, err: 0x80800612 [0008.072] I> ########## NVME (1) boot ########## [0008.076] I> Initializing nvme device instance 1 [0008.081] I> Initializing nvme controller [0008.085] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0008.091] I> vpcie3v3-supply not found [0008.095] I> vpcie12v-supply not found [0008.098] W> Failed to get nvidia,plat-gpios [0008.102] I> tegrabl_pcie_soc_preinit: (1): [0008.106] I> Unpowergate [0008.109] I> tegrabl_car_clk_disable(1) ... [0008.113] I> tegrabl_car_rst_set(CORE, 1) ... [0008.117] I> tegrabl_car_rst_set(APB, 1) ... [0008.121] I> tegrabl_car_clk_enable(1) ... [0008.125] I> tegrabl_car_rst_clear(APB, 1) ... [0008.129] I> tegrabl_set_ctrl_state(1) [0008.133] I> CLR PCIE_APB:6 [0008.136] I> tegrabl_pcie_soc_init: (1): [0008.139] I> APPL initialization ... [0008.143] I> poweron phys [0008.145] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14100000 [0008.152] I> tegrabl_power_on_phy: power on phy @0x3e10000 [0008.258] I> PCIe controller-1 link is up [0008.259] I> tegra_pcie_info[1].cfg0_base = 0x30000000 [0008.259] I> tegra_pcie_info[1].cfg1_base = 0x30020000 [0008.259] I> tegra_pcie_info[1].atu_dma_base = 0x30040000 [0008.260] I> tegra_pcie_bus[1].mem = 0x30200000 [0008.260] I> Scanning busnr: 0 devfn: 0 [0008.260] I> PCIe IDs: 0x1ad210de [0008.264] I> PCIe RID_CC: 0x60400a1 [0008.267] I> Scanning busnr: 1 devfn: 0 [0008.271] I> PCIe IDs: 0x91711b4b [0008.274] I> PCIe RID_CC: 0x1060113 [0008.277] I> PCI Config: I/O=0x30100000, Memory=0x30200000 [0008.282] I> IO bar_num=0 bar=0x30100000 [0008.286] I> IO bar_num=1 bar=0x30100008 [0008.290] I> IO bar_num=2 bar=0x30100010 [0008.294] I> IO bar_num=3 bar=0x30100018 [0008.297] I> IO bar_num=4 bar=0x30100020 [0008.301] I> MEM bar_num=5 bar=0x30200000 [0008.305] I> Number of PCIe devices detected: 2 [0008.309] E> tegrabl_nvme_init: Failed tegrabl_pcie_get_dev(1); error=0x0 [0008.316] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0008.323] W> Failed to open NVME-1, err = 80800612 [0008.327] W> Failed to initialize device 10-1 [0008.331] E> NVME (1) boot failed, err: 0x80800612 [0008.336] I> ########## NVME (2) boot ########## [0008.340] I> Initializing nvme device instance 2 [0008.345] I> Initializing nvme controller [0008.349] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0008.355] I> vpcie3v3-supply not found [0008.359] I> vpcie12v-supply not found [0008.362] W> Failed to get nvidia,plat-gpios [0008.366] I> tegrabl_pcie_soc_preinit: (2): [0008.370] I> Unpowergate [0008.373] I> tegrabl_car_clk_disable(2) ... [0008.377] I> tegrabl_car_rst_set(CORE, 2) ... [0008.381] I> tegrabl_car_rst_set(APB, 2) ... [0008.385] I> tegrabl_car_clk_enable(2) ... [0008.389] I> tegrabl_car_rst_clear(APB, 2) ... [0008.393] I> tegrabl_set_ctrl_state(2) [0008.397] I> CLR PCIE_APB:6 [0008.400] I> tegrabl_pcie_soc_init: (2): [0008.403] I> APPL initialization ... [0008.407] I> poweron phys [0008.410] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14120000 [0008.416] I> tegrabl_power_on_phy: controller 2 not available [0008.421] E> Failed to power on phy on controller-2 [0008.426] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0008.431] I> Failed to initialize SoC Host PCIe controller [0008.436] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(2); error=0x1 [0008.443] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0008.449] W> Failed to open NVME-2, err = 80800601 [0008.454] W> Failed to initialize device 10-2 [0008.458] E> NVME (2) boot failed, err: 0x80800601 [0008.463] I> ########## NVME (3) boot ########## [0008.467] I> Initializing nvme device instance 3 [0008.472] I> Initializing nvme controller [0008.476] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0008.482] I> vpcie3v3-supply not found [0008.485] I> vpcie12v-supply not found [0008.489] W> Failed to get nvidia,plat-gpios [0008.493] I> tegrabl_pcie_soc_preinit: (3): [0008.497] I> Unpowergate [0008.500] I> tegrabl_car_clk_disable(3) ... [0008.504] I> tegrabl_car_rst_set(CORE, 3) ... [0008.508] I> tegrabl_car_rst_set(APB, 3) ... [0008.512] I> tegrabl_car_clk_enable(3) ... [0008.516] I> tegrabl_car_rst_clear(APB, 3) ... [0008.520] I> tegrabl_set_ctrl_state(3) [0008.524] I> CLR PCIE_APB:6 [0008.526] I> tegrabl_pcie_soc_init: (3): [0008.530] I> APPL initialization ... [0008.533] I> poweron phys [0008.536] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14140000 [0008.542] I> tegrabl_power_on_phy: power on phy @0x3e80000 [0009.648] C> Failed to link up controller-3 [0009.648] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0009.649] I> Failed to initialize SoC Host PCIe controller [0009.649] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(3); error=0x12 [0009.650] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0009.650] W> Failed to open NVME-3, err = 80800612 [0009.655] W> Failed to initialize device 10-3 [0009.659] E> NVME (3) boot failed, err: 0x80800612 [0009.664] I> ########## NVME (4) boot ########## [0009.668] I> Initializing nvme device instance 4 [0009.672] I> Initializing nvme controller [0009.677] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0009.683] I> vpcie3v3-supply not found [0009.686] I> vpcie12v-supply not found [0009.690] W> Failed to get nvidia,plat-gpios [0009.694] I> tegrabl_pcie_soc_preinit: (4): [0009.698] I> Unpowergate [0009.701] I> tegrabl_car_clk_disable(4) ... [0009.704] I> tegrabl_car_rst_set(CORE, 4) ... [0009.709] I> tegrabl_car_rst_set(APB, 4) ... [0009.713] I> tegrabl_car_clk_enable(4) ... [0009.717] I> tegrabl_car_rst_clear(APB, 4) ... [0009.721] I> tegrabl_set_ctrl_state(4) [0009.725] I> CLR PCIE_APB:6 [0009.727] I> tegrabl_pcie_soc_init: (4): [0009.731] I> APPL initialization ... [0009.734] I> poweron phys [0009.737] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x14160000 [0009.743] I> tegrabl_power_on_phy: controller 4 not available [0009.749] E> Failed to power on phy on controller-4 [0009.754] W> Failed tegrabl_pcie_soc_init(), error=0x1 [0009.758] I> Failed to initialize SoC Host PCIe controller [0009.764] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(4); error=0x1 [0009.770] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800601 [0009.777] W> Failed to open NVME-4, err = 80800601 [0009.781] W> Failed to initialize device 10-4 [0009.786] E> NVME (4) boot failed, err: 0x80800601 [0009.790] I> ########## NVME (5) boot ########## [0009.795] I> Initializing nvme device instance 5 [0009.799] I> Initializing nvme controller [0009.804] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0009.809] I> i=0, reg_phandle=0x1b [0009.815] I> reg_voltage=3300000 [0009.816] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1b, 3300000) [0009.828] I> enabling 'vdd-3v3-pcie' regulator [0009.829] I> i=1, reg_phandle=0x1c [0009.833] I> reg_voltage=1200000 [0009.834] I> tegrabl_pcie_enable_regulators: regulator_set_voltage(0x1c, 1200000) [0009.846] I> enabling 'vdd-12v-pcie' regulator [0009.846] I> tegrabl_pcie_soc_preinit: (5): [0009.849] I> Unpowergate [0009.852] I> tegrabl_car_clk_disable(5) ... [0009.856] I> tegrabl_car_rst_set(CORE, 5) ... [0009.860] I> tegrabl_car_rst_set(APB, 5) ... [0009.864] I> tegrabl_car_clk_enable(5) ... [0009.868] I> tegrabl_car_rst_clear(APB, 5) ... [0009.872] I> tegrabl_set_ctrl_state(5) [0009.876] I> CLR PCIE_APB:6 [0009.879] I> tegrabl_pcie_soc_init: (5): [0009.882] I> APPL initialization ... [0009.886] I> poweron phys [0009.889] I> tegrabl_locate_pcie_ctrl_in_dt: found match at 0x141a0000 [0009.895] I> tegrabl_power_on_phy: power on phy @0x3eb0000 [0009.900] I> tegrabl_power_on_phy: power on phy @0x3ec0000 [0009.905] I> tegrabl_power_on_phy: power on phy @0x3ed0000 [0009.911] I> tegrabl_power_on_phy: power on phy @0x3ee0000 [0009.916] I> tegrabl_power_on_phy: power on phy @0x3ef0000 [0009.921] I> tegrabl_power_on_phy: power on phy @0x3f00000 [0009.927] I> tegrabl_power_on_phy: power on phy @0x3f10000 [0009.932] I> tegrabl_power_on_phy: power on phy @0x3f20000 [0011.037] C> Failed to link up controller-5 [0011.038] W> Failed tegrabl_pcie_soc_init(), error=0x12 [0011.038] I> Failed to initialize SoC Host PCIe controller [0011.039] E> tegrabl_nvme_init: Failed tegrabl_pcie_init(5); error=0x12 [0011.039] W> tegrabl_nvme_bdev_open: Failed NVME INIT; error=0x80800612 [0011.040] W> Failed to open NVME-5, err = 80800612 [0011.044] W> Failed to initialize device 10-5 [0011.048] E> NVME (5) boot failed, err: 0x80800612 [0011.053] I> ########## Fixed storage boot ########## [0011.058] I> Loading kernel-bootctrl from partition [0011.063] I> Loading partition kernel-bootctrl at 0xa4b30000 from device(0x1) [0011.076] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0011.077] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0011.090] I> Already published: 00010003 [0011.090] I> Look for boot partition [0011.091] I> Fallback: assuming 0th partition is boot partition [0011.097] I> Detect filesystem [0011.124] I> Loading extlinux.conf ... [0011.124] I> Loading extlinux.conf binary from rootfs ... [0011.124] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0011.179] I> Loading extlinux.conf sig file from rootfs ... [0011.180] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf.sig [0011.216] I> Validate extlinux.conf ... [0011.217] I> T19x: Authenticate extlinux.conf (bin_type: 54), max size 0x2000 [0011.217] I> Encryption fuse is not ON [0011.218] I> L4T boot options [0011.218] I> [1]: "primary kernel" [0011.218] I> Enter choice: [0014.219] I> Continuing with default option: 1 [0014.219] I> Loading kernel ... [0014.219] I> Loading kernel binary from rootfs ... [0014.220] I> rootfs path: /sdmmc_user/boot/Image [0014.445] I> Loading kernel sig file from rootfs ... [0014.446] I> rootfs path: /sdmmc_user/boot/Image.sig [0014.470] I> overload load_size to 34484232 (from 34484240) [0014.471] I> Validate kernel ... [0014.471] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0014.785] I> Encryption fuse is not ON [0014.816] I> Loading kernel-dtb ... [0014.816] I> No kernel-dtb binary path [0014.816] I> Continue to load from partition ... [0014.817] W> No valid slot number is found in scratch register [0014.817] W> Return default slot: _a [0014.817] I> A/B: bin_type (38) slot 0 [0014.818] I> Loading kernel-dtb from partition [0014.819] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0014.834] I> Validate kernel-dtb ... [0014.834] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0014.839] I> Encryption fuse is not ON [0014.840] I> Loading ramdisk from rootfs ... [0014.844] I> Loading ramdisk binary from rootfs ... [0014.848] I> rootfs path: /sdmmc_user/boot/initrd [0014.923] I> Loading ramdisk sig file from rootfs ... [0014.923] I> rootfs path: /sdmmc_user/boot/initrd.sig [0014.954] I> overload load_size to 7238344 (from 7238352) [0014.954] I> Validate ramdisk ... [0014.955] I> T19x: Authenticate ramdisk (bin_type: 54), max size 0x4000000 [0015.021] I> Encryption fuse is not ON [0015.034] I> Kernel hdr @0xa4b30000 [0015.035] I> Kernel dtb @0x90000000 [0015.035] I> decompressor handler not found [0015.035] I> Copying kernel image (34484232 bytes) from 0xa4b30000 to 0x80080000 ... [0015.045] I> Done [0015.047] I> Updated bpmp info to DTB [0015.048] I> Ramdisk: Base: 0x92000000; Size: 0x6e72c8 [0015.048] I> Updated initrd info to DTB [0015.048] W> WARN: Fail to override "console=none" in commandline [0015.049] I> Active rootfs suffix: [0015.051] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0015.058] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0015.065] W> No valid slot number is found in scratch register [0015.071] W> Return default slot: _a [0015.074] I> Active slot suffix: [0015.077] I> add_boot_slot_suffix: slot_suffix = [0015.082] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06aa000 lut_mem=0x2008@0xa06a5000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0015.112] I> Updated bootarg info to DTB [0015.115] W> MAC addr invalid! [0015.118] E> Failed to get WIFI MAC address [0015.122] W> MAC addr invalid! [0015.125] E> Failed to get Bluetooth MAC address [0015.130] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:8f:b2 [0015.136] W> "plugin-manager" doesn't exist, creating [0015.141] I> Adding /chosen/plugin-manager/cvm [0015.145] W> "chip-id" doesn't exist, creating [0015.149] I> Adding /chosen/plugin-manager/chip-id [0015.154] W> "configs" doesn't exist, creating [0015.158] I> Adding /chosen/plugin-manager/configs [0015.163] W> "ids" doesn't exist, creating [0015.167] I> Adding /chosen/plugin-manager/ids [0015.171] W> "odm-data" doesn't exist, creating [0015.175] I> Adding /chosen/plugin-manager/odm-data [0015.183] W> "memory" doesn't exist, creating [0015.185] I> [0] START: 0x80000000, END: 0xac000000 [0015.189] I> [1] START: 0xac004000, END: 0xf0ad0000 [0015.194] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0015.198] I> dram_block larger than 80000000 [0015.202] I> [3] START: 0x100000000, END: 0x880000000 [0015.207] I> added [base:0x80000000, size:0x2c000000] to /memory [0015.213] I> added [base:0xac200000, size:0x44800000] to /memory [0015.219] I> added [base:0x100000000, size:0x780000000] to /memory [0015.226] I> Updated memory info to DTB [0015.229] E> add_disp_param: failed to get display params for du=1 [0015.235] W> "reset" doesn't exist, creating [0015.239] I> Adding ecid(000000016459e5871000000008028040) to DT [0015.245] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0015.249] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0015.254] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0015.259] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0015.264] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0015.268] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0015.273] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0015.278] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0015.284] W> "misc-data" doesn't exist, creating [0015.287] I> Boot-device: eMMC [0015.290] I> Add boot-sdmmc to plugin-manager/misc-data [0015.295] I> Add storage-sdmmc to plugin-manager/misc-data [0015.301] W> Unknown storage device [0015.304] I> Add serial number:1420820014791 as DT property [0015.310] I> Plugin-manager override starting [0015.314] I> node /plugin-manager/fragement-tegra-wdt-en matches [0015.321] I> node /plugin-manager/fragement-soft-wdt matches [0015.329] I> node /plugin-manager/fragment-pcie-c5-rp matches [0015.333] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0015.344] I> Disable plugin-manager status in FDT [0015.345] I> Plugin-manager override finished successfully [0015.347] I> tegrabl_load_kernel_and_dtb: Done [0015.369] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06aa000 [ 0.000000] Found lut_mem: 00002008@a06a5000 WARNING: pll_d3 has no dyn ramp [ 6.525010] cgroup: cgroup2: unknown option "nsdelegate" [ 7.654813] using random self ethernet address [ 7.655225] using random host ethernet address [ 7.913206] random: crng init done [ 7.913349] random: 7 urandom warning(s) missed due to ratelimiting [ 8.282404] using random self ethernet address [ 8.282558] using random host ethernet address [ 8.828976] CPU4: shutdown [ 8.942105] CPU5: shutdown [ 9.001154] CPU6: shutdown [ 9.051947] CPU7: shutdown [ 11.297371] Bridge firewalling registered Ubuntu 18.04.5 LTS xview-desktop ttyTCU0 xview-desktop login: