[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.299-tegra (buildbrain@mobile-u64-5494-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Nov 22 09:24:30 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2033152 [ 0.000000] DMA zone: 7192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 460288 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2001384 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=PARTUUID=8c766cde-aac0-4513-8e3b-5442f786341e rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30080(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7190480K/8132608K available (15422K kernel code, 2970K rwdata, 6712K rodata, 8640K init, 614K bss, 188464K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f90000 ( 15424 KB) [ 0.000000] .rodata : 0xffffff8008f90000 - 0xffffff8009630000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a186808 ( 2971 KB) [ 0.000000] .bss : 0xffffff800a186808 - 0xffffff800a22032c ( 615 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000672] Console: colour dummy device 80x25 [ 0.000683] console [tty0] enabled [ 0.000691] bootconsole [tegra_comb_uart0] disabled [ 0.000705] kmemleak: Kernel memory leak detector disabled [ 0.000722] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000737] pid_max: default: 32768 minimum: 301 [ 0.001806] Security Framework initialized [ 0.002364] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002374] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003997] ftrace: allocating 47250 entries in 185 pages [ 0.405686] sched-energy: Sched-energy-costs installed from DT [ 0.405706] ASID allocator initialised with 65536 entries [ 0.440271] tegra-id: chipid=21917. [ 0.440283] tegra-id: opt_subrevision=1. [ 0.440313] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.440327] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.440342] DTB Build time: Feb 19 2022 09:00:51 [ 0.488343] CPU1: Booted secondary processor [4e0f0040] [ 0.520583] CPU2: Booted secondary processor [4e0f0040] [ 0.552641] CPU3: Booted secondary processor [4e0f0040] [ 0.584990] CPU4: Booted secondary processor [4e0f0040] [ 0.616972] CPU5: Booted secondary processor [4e0f0040] [ 0.617155] Brought up 6 CPUs [ 0.617196] SMP: Total of 6 processors activated. [ 0.617217] CPU features: detected feature: Privileged Access Never [ 0.617225] CPU features: detected feature: LSE atomic instructions [ 0.617261] CPU features: detected feature: User Access Override [ 0.617269] CPU features: detected feature: 32-bit EL0 Support [ 0.618777] CPU: All CPU(s) started at EL2 [ 0.618828] alternatives: patching kernel code [ 0.625253] devtmpfs: initialized [ 0.667344] Initilizing CustomIPI irq domain [ 0.667602] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.667616] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.685727] pinctrl core: initialized pinctrl subsystem [ 0.686017] OS set in device tree is not L4T. [ 0.686310] regulator-dummy: no parameters [ 0.686637] Initializing plugin-manager [ 0.686704] Plugin module not found [ 0.686750] Plugin-manager status disabled [ 0.688182] NET: Registered protocol family 16 [ 0.689625] pstore: using zlib compression [ 0.689645] console [pstore-1] enabled [ 0.689651] pstore: Registered ramoops as persistent store backend [ 0.689658] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.703789] cpuidle: using governor menu [ 0.704902] bpmp: waiting for handshake [ 0.704910] bpmp: handshake completed [ 0.704928] bpmp: synchronizing channels [ 0.704937] bpmp: channels synchronized [ 0.704944] bpmp: mail init ok [ 0.707415] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.707600] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.707607] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.707613] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.707619] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.707647] t19x-arm-smmu 12000000.iommu: nested translation [ 0.707656] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.707664] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.707671] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.707679] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.707685] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.711849] vdso: 2 pages (1 code @ ffffff8008f97000, 1 data @ ffffff8009ea4000) [ 0.711875] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.714617] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.715991] tegra_aon_clk_init: ok [ 0.716000] Registering BPMP clocks... [ 0.716093] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.716730] Serial: AMBA PL011 UART driver [ 0.716891] tegra_powergate_init: DONE [ 0.717379] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.717391] DTB Build time: Feb 19 2022 09:00:51 [ 0.720438] Tegra reboot handler registered. [ 0.728418] iommu: Adding device 14160000.pcie to group 0 [ 0.729071] iommu: Adding device 141a0000.pcie to group 1 [ 0.730642] iommu: Adding device 2490000.ether_qos to group 2 [ 0.731144] iommu: Adding device 3100000.serial to group 3 [ 0.731657] iommu: Adding device 3110000.serial to group 4 [ 0.732036] iommu: Adding device 3140000.serial to group 5 [ 0.732688] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.732996] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.733015] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.733020] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.733025] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.733074] tegra-pmc: PMC Prod config success [ 0.733276] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.733290] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.733624] iommu: Adding device 3460000.sdhci to group 6 [ 0.734104] iommu: Adding device 3210000.spi to group 7 [ 0.734524] iommu: Adding device 3230000.spi to group 8 [ 0.734889] iommu: Adding device 3270000.spi to group 9 [ 0.736182] iommu: Adding device 3160000.i2c to group 10 [ 0.736579] iommu: Adding device c240000.i2c to group 11 [ 0.737016] iommu: Adding device 3180000.i2c to group 12 [ 0.737412] iommu: Adding device 3190000.i2c to group 13 [ 0.737956] iommu: Adding device 31b0000.i2c to group 14 [ 0.738332] iommu: Adding device 31c0000.i2c to group 15 [ 0.738773] iommu: Adding device c250000.i2c to group 16 [ 0.739217] iommu: Adding device 31e0000.i2c to group 17 [ 0.739796] iommu: Adding device sound to group 18 [ 0.740391] iommu: Adding device 3510000.hda to group 19 [ 0.740957] iommu: Adding device bc00000.rtcpu to group 20 [ 0.742709] iommu: Adding device 13e10000.host1x to group 21 [ 0.743103] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.743483] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.743842] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.744293] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.744672] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.745206] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.745603] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.745974] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.746491] iommu: Adding device 15340000.vic to group 30 [ 0.746881] iommu: Adding device 15380000.nvjpg to group 31 [ 0.747167] iommu: Adding device 15500000.tsec to group 32 [ 0.747439] iommu: Adding device 15100000.tsecb to group 33 [ 0.747749] iommu: Adding device 15480000.nvdec to group 34 [ 0.748043] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.748381] iommu: Adding device 154c0000.nvenc to group 36 [ 0.748664] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.749074] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.749571] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.750191] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.754459] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.754519] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.755202] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.755271] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.757173] iommu: Adding device 15c10000.vi to group 42 [ 0.757338] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.757868] iommu: Adding device 14800000.isp to group 43 [ 0.758916] iommu: Adding device 16000000.pva0 to group 44 [ 0.759511] iommu: Adding device 16800000.pva1 to group 45 [ 0.759890] iommu: Adding device 15810000.se to group 46 [ 0.760398] iommu: Adding device 15820000.se to group 47 [ 0.760697] iommu: Adding device 15830000.se to group 48 [ 0.760980] iommu: Adding device 15840000.se to group 49 [ 0.761262] iommu: Adding device c1a0000.aon to group 50 [ 0.763183] iommu: Adding device d000000.bpmp to group 51 [ 0.763493] bpmp: ping status is 0 [ 0.763626] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.766846] bpmp d000000.bpmp: probe ok [ 0.768817] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.769489] iommu: Adding device smmu_test to group 52 [ 0.770620] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.770639] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.770660] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c30000 [ 0.770676] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c40000 [ 0.770692] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2c50000 [ 0.770708] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b80000 [ 0.770725] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2b90000 [ 0.770743] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2ba0000 [ 0.770759] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x2bb0000 [ 0.770775] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1700000 [ 0.770791] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1710000 [ 0.770806] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1720000 [ 0.770822] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1730000 [ 0.770840] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1740000 [ 0.770858] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1750000 [ 0.770874] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1760000 [ 0.770890] mc: mapped MMIO address: 0xffffff800b1d0000 -> 0x1770000 [ 0.770960] mc-err: mcerr ops are set to t19x [ 0.776852] iommu: Adding device 2600000.dma to group 53 [ 0.781571] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.782905] GPIO line 339 (wifi-enable) hogged as output/high [ 0.782949] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.783016] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.783387] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.791686] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.791859] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.791906] GPIO line 266 (w-disable1) hogged as output/high [ 0.791948] GPIO line 264 (w-disable2) hogged as output/high [ 0.791990] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.792307] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.794751] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.794763] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.794774] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.795633] iommu: Adding device 3550000.xudc to group 54 [ 0.796320] iommu: Adding device 3610000.xhci to group 55 [ 0.798285] arm64_ras arm64_ras: probed [ 0.798675] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.798730] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.798821] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.798894] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.798968] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.799040] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.799237] carmel_ras_enable: RAS enabled on cpu0 [ 0.799414] carmel_ras_enable: RAS enabled on cpu1 [ 0.799623] carmel_ras_enable: RAS enabled on cpu2 [ 0.799812] carmel_ras_enable: RAS enabled on cpu3 [ 0.800000] carmel_ras_enable: RAS enabled on cpu4 [ 0.800203] carmel_ras_enable: RAS enabled on cpu5 [ 0.800283] carmel_ras carmel_ras: probed [ 0.801563] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.802086] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.803180] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.804260] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.805262] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.805617] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.807048] vdd-ac-bat: 5000 mV [ 0.807457] vdd-sdmmc1-sw: 3300 mV [ 0.807789] vdd-1v8-sd: 1800 mV [ 0.808108] vdd-3v3-cvb: 3300 mV [ 0.808459] vdd-1v8-cvb: 1800 mV [ 0.808859] vdd-epb-1v0: 1000 mV [ 0.809048] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.809333] avdd-cam-2v8: 2800 mV [ 0.809712] vdd-fan: 5000 mV [ 0.810112] vdd-hdmi-5v0: 5000 mV [ 0.810444] vdd_sys_en: 1200 mV [ 0.850839] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.857832] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.858200] SCSI subsystem initialized [ 0.858445] libata version 3.00 loaded. [ 0.858691] usbcore: registered new interface driver usbfs [ 0.858744] usbcore: registered new interface driver hub [ 0.858791] usbcore: registered new device driver usb [ 0.870273] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.873285] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.878409] vdd-1v0: at 1000 mV [ 0.882447] vdd-1v8-hs: at 1800 mV [ 0.886462] vdd-1v8-ls: at 1800 mV [ 0.890465] vdd-1v8-ao: at 1800 mV [ 0.894509] vddio-ddr-1v1: at 1100 mV [ 0.898274] vdd-rtc: at 800 mV [ 0.899514] spmic-ldo1: at 2375 mV [ 0.906332] vdd-ao-3v3: at 3300 mV [ 0.914381] vddio-emmc-3v3: at 3300 mV [ 0.915649] spmic-ldo4: at 1587 mV [ 0.922412] vdd-usb-3v3: at 3300 mV [ 0.930450] vddio-sdmmc1-3v3: at 3300 mV [ 0.934495] vdd-csi-1v2: at 1200 mV [ 0.935970] spmic-ldo8: at 1800 mV [ 0.940960] GPIO line 246 (gpio_default) hogged as output/high [ 0.942313] GPIO line 247 (gpio_default) hogged as output/high [ 0.942695] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.943081] max77620 4-003c: max77620 probe successful [ 0.943931] media: Linux media interface: v0.10 [ 0.944048] Linux video capture interface: v2.00 [ 0.945751] pps_core: LinuxPPS API ver. 1 registered [ 0.945763] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.945816] PTP clock support registered [ 0.946163] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.946552] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.946609] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.949303] trusty trusty: trusty version: Built: 08:57:16 Feb 19 2022 [ 0.949364] trusty trusty: selected api version: 3 (requested 3) [ 0.950800] Advanced Linux Sound Architecture Driver Initialized. [ 0.951615] Bluetooth: Core ver 2.22 [ 0.951714] NET: Registered protocol family 31 [ 0.951720] Bluetooth: HCI device and connection manager initialized [ 0.951732] Bluetooth: HCI socket layer initialized [ 0.951741] Bluetooth: L2CAP socket layer initialized [ 0.951768] Bluetooth: SCO socket layer initialized [ 0.956131] camchar: rtcpu character device driver loaded [ 0.956675] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.956781] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.957807] clocksource: Switched to clocksource arch_sys_counter [ 1.006547] VFS: Disk quotas dquot_6.6.0 [ 1.006640] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.007220] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.008500] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.008548] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.008799] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.008812] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.008835] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.008849] nvmap_page_pool_init: Total RAM pages: 1986036 [ 1.008858] nvmap_page_pool_init: nvmap page pool size: 248254 pages (969 MB) [ 1.009225] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.009698] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.011770] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.026801] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.027144] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.027418] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.027679] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.027884] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.029069] la/ptsa driver initialized. [ 1.029398] NET: Registered protocol family 2 [ 1.029508] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.033731] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.034153] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.034769] TCP: Hash tables configured (established 65536 bind 65536) [ 1.034865] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.034983] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.035386] NET: Registered protocol family 1 [ 1.036059] RPC: Registered named UNIX socket transport module. [ 1.036070] RPC: Registered udp transport module. [ 1.036079] RPC: Registered tcp transport module. [ 1.036087] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.036101] PCI: CLS 0 bytes, default 64 [ 1.036409] Trying to unpack rootfs image as initramfs... [ 1.249913] Freeing initrd memory: 7068K [ 1.270573] random: fast init done [ 1.274714] host1x 13e10000.host1x: initialized [ 1.276420] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.281041] audit: initializing netlink subsys (disabled) [ 1.281103] audit: type=2000 audit(0.892:1): initialized [ 1.281966] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.291902] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.297200] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.297972] 9p: Installing v9fs 9p2000 file system support [ 1.302880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.303058] io scheduler noop registered [ 1.303349] io scheduler cfq registered (default) [ 1.307342] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.311089] iommu: Adding device 2993000.adsp to group 56 [ 1.403019] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.404029] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.418048] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.418553] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.419174] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.419611] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.420122] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.423200] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.423381] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.426133] tsec 15500000.tsec: initialized [ 1.427929] tsec 15100000.tsecb: initialized [ 1.431685] nvdec 15480000.nvdec: initialized [ 1.434712] nvdec 15140000.nvdec1: initialized [ 1.440395] falcon 15340000.vic: initialized [ 1.442612] falcon 15380000.nvjpg: initialized [ 1.444495] falcon 154c0000.nvenc: initialized [ 1.446332] falcon 15a80000.nvenc1: initialized [ 1.449455] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.451158] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.452663] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.454240] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.455866] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.457467] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.458996] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.460472] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.464195] t194-nvcsi 15a00000.nvcsi: initialized [ 1.469611] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.469962] scare-pigeon 14b00000.isp-thi: initialized [ 1.475415] pva 16000000.pva0: initialized [ 1.481188] pva 16800000.pva1: initialized [ 1.486000] nvdla 15880000.nvdla0: initialized [ 1.490684] nvdla 158c0000.nvdla1: initialized [ 1.492204] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.492226] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.492289] tegradccommon 15200000.dc_common: dma mapping done [ 1.492450] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.492460] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.492797] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.492825] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.493102] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.493110] tegra_cec 3960000.tegra_cec: probed [ 1.494079] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.494130] generic_infoframe_type: 0x87 [ 1.494263] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.494318] tegradc 15200000.nvdisplay: Display dc.ffffff800bd20000 registered with id=0 [ 1.499006] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.499019] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.499029] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.499324] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.499335] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.502454] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.502463] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.504857] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.505905] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.505914] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.506197] kfuse 3830000.kfuse: initialized [ 1.512100] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.514956] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.516131] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.516896] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.517997] console [ttyTCU0] enabled [ 1.518299] [drm] Initialized [ 1.567560] brd: module loaded [ 1.585577] loop: module loaded [ 1.585638] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.585882] tegra_profiler: auth: init [ 1.586572] THERMAL EST: found 3 subdevs [ 1.586585] THERMAL EST num_resources: 0 [ 1.586596] [THERMAL EST subdev 0] [ 1.586606] [THERMAL EST subdev 1] [ 1.586615] [THERMAL EST subdev 2] [ 1.586629] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.587014] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.587022] THERMAL EST: thz register success. [ 1.587239] THERMAL EST: end of probe, return err: 0 [ 1.587879] sd: No Scsi addr parsed to reserve index [ 1.587918] hisi_sas: driver version v1.6 [ 1.602382] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.602391] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.602402] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.602732] 1 ofpart partitions found on MTD device spi6.0 [ 1.602757] Creating 1 MTD partitions on "spi6.0": [ 1.602782] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.606780] tun: Universal TUN/TAP device driver, 1.6 [ 1.606786] tun: (C) 1999-2004 Max Krasnyansky [ 1.607506] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.607512] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.607551] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.607556] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.607598] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.607603] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.607647] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.607652] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.857027] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.857576] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 5a 2a 6d [ 1.857594] Using phyrst_lpmode = 1 from DT [ 1.860318] PPP generic driver version 2.4.2 [ 1.860691] PPP BSD Compression module registered [ 1.860700] PPP Deflate Compression module registered [ 1.860720] PPP MPPE Compression module registered [ 1.860726] NET: Registered protocol family 24 [ 1.860780] usbcore: registered new interface driver r8152 [ 1.860858] usbcore: registered new interface driver asix [ 1.860902] usbcore: registered new interface driver ax88179_178a [ 1.860958] usbcore: registered new interface driver cdc_ether [ 1.860988] usbcore: registered new interface driver net1080 [ 1.861020] usbcore: registered new interface driver cdc_subset [ 1.861049] usbcore: registered new interface driver zaurus [ 1.861092] usbcore: registered new interface driver cdc_ncm [ 1.861289] VFIO - User Level meta-driver version: 0.3 [ 1.862427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.862440] ehci-pci: EHCI PCI platform driver [ 1.862471] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.862493] ohci-pci: OHCI PCI platform driver [ 1.862525] ohci-platform: OHCI generic platform driver [ 1.867174] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.869270] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f5436400 id [ 1.869962] usbcore: registered new interface driver uas [ 1.870013] usbcore: registered new interface driver usb-storage [ 1.870099] usbcore: registered new interface driver usbserial [ 1.871906] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 1.871939] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.871959] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.872732] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.872775] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.872978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.872986] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.872992] usb usb1: Product: xHCI Host Controller [ 1.872998] usb usb1: Manufacturer: Linux 4.9.299-tegra xhci-hcd [ 1.873004] usb usb1: SerialNumber: 3610000.xhci [ 1.873479] hub 1-0:1.0: USB hub found [ 1.873525] hub 1-0:1.0: 4 ports detected [ 1.875160] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.875175] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.875186] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.875486] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.875494] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.875500] usb usb2: Product: xHCI Host Controller [ 1.875506] usb usb2: Manufacturer: Linux 4.9.299-tegra xhci-hcd [ 1.875512] usb usb2: SerialNumber: 3610000.xhci [ 1.876758] hub 2-0:1.0: USB hub found [ 1.876805] hub 2-0:1.0: 4 ports detected [ 1.877724] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.877855] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.878103] Wake76 for irq=199 [ 1.878108] Wake77 for irq=199 [ 1.878113] Wake78 for irq=199 [ 1.878117] Wake79 for irq=199 [ 1.878121] Wake80 for irq=199 [ 1.878125] Wake81 for irq=199 [ 1.878129] Wake82 for irq=199 [ 1.878168] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.878176] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.878891] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.878912] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.879130] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.879142] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.879956] mousedev: PS/2 mouse device common for all mice [ 1.880070] usbcore: registered new interface driver xpad [ 1.978258] usb usb2: usb_suspend_both: status 0 [ 2.006606] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.008072] Wake73 for irq=42 [ 2.009323] rtc rtc1: alarm rtc device [ 2.009340] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.009361] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.009535] i2c /dev entries driver [ 2.011897] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.012279] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.012288] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.012754] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.036245] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.036298] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.036569] imx219 9-0010: board setup failed [ 2.036735] imx219: probe of 9-0010 failed with error -121 [ 2.037117] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.060374] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.060425] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.060695] imx219 10-0010: board setup failed [ 2.060879] imx219: probe of 10-0010 failed with error -121 [ 2.061913] max77620-power max20024-power: Event recorder REG_NVERC : 0x4 [ 2.068741] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.069064] FAN dev name: pwm-fan [ 2.069108] FAN:gpio request success. [ 2.069142] FAN: can't find tach_gpio [ 2.069153] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.069186] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.069413] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.069420] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.070367] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.070401] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.070408] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.070415] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.070421] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.070428] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.070434] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.070441] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.070448] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.070454] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.071371] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.072303] device-mapper: uevent: version 1.0.3 [ 2.072824] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.076604] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.077721] cpuidle: Initializing cpuidle driver [ 2.078674] sdhci: Secure Digital Host Controller Interface driver [ 2.078678] sdhci: Copyright(c) Pierre Ossman [ 2.078682] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.079617] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.082477] CMDQ: cmdq_platfm_init successful [ 2.121842] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.125842] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.146731] usb 1-2: New USB device found, idVendor=0424, idProduct=2744 [ 2.146738] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.146742] usb 1-2: Product: USB2744 [ 2.146747] usb 1-2: Manufacturer: Microchip Tech [ 2.147525] hub 1-2:1.0: USB hub found [ 2.147640] hub 1-2:1.0: 5 ports detected [ 2.163838] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.177148] mmc0: periodic cache flush enabled [ 2.177161] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.177660] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.177977] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.178268] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.178515] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.185195] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.266075] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 2.286365] usb 2-3: New USB device found, idVendor=0424, idProduct=5744 [ 2.286371] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 2.286379] usb 2-3: Product: USB5744 [ 2.286383] usb 2-3: Manufacturer: Microchip Tech [ 2.288451] hub 2-3:1.0: USB hub found [ 2.288871] hub 2-3:1.0: 4 ports detected [ 2.433834] usb 1-2.3: new high-speed USB device number 3 using tegra-xusb [ 2.445829] usb 2-3: usb_suspend_both: status 0 [ 2.445994] usb usb2: usb_suspend_both: status 0 [ 2.469231] usb 1-2.3: New USB device found, idVendor=1e0e, idProduct=9001 [ 2.469239] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.469244] usb 1-2.3: Product: SimTech, Incorporated [ 2.469249] usb 1-2.3: Manufacturer: SimTech, Incorporated [ 2.469253] usb 1-2.3: SerialNumber: 0123456789ABCDEF [ 2.497841] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.497848] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.549857] usb 1-2.5: new high-speed USB device number 4 using tegra-xusb [ 2.570850] usb 1-2.5: New USB device found, idVendor=0424, idProduct=2740 [ 2.570857] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.570862] usb 1-2.5: Product: Hub Controller [ 2.570866] usb 1-2.5: Manufacturer: Microchip Tech [ 11.617869] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 11.618032] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 11.618156] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 11.618251] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 11.618385] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x0 [ 11.618486] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800080 [ 11.618590] tegra-i2c 3190000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 11.618710] tegra-i2c 3190000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 11.618822] tegra-i2c 3190000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 11.618941] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 11.619049] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 11.619157] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 11.622494] tegradc 15200000.nvdisplay: probed [ 11.622876] Console: switching to colour frame buffer device 80x30 [ 11.622896] tegradc 15200000.nvdisplay: fb registered [ 11.623127] gpio tegra-gpio wake63 for gpio=97(M:1) [ 11.623922] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 11.624042] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 11.628958] Parent Clock set for DC plld2 [ 11.632416] edid invalid [ 11.634234] tegradc 15200000.nvdisplay: hdmi: tmds rate:25200K prod-setting:prod_c_hdmi_0m_54m [ 11.635590] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 14.076155] usb 1-2: USB disconnect, device number 2 [ 14.076161] usb 1-2.3: USB disconnect, device number 3 [ 14.077468] usb 1-2.5: USB disconnect, device number 4 [ 14.221915] usb usb1: usb_suspend_both: status 0 [ 14.297895] usb 2-3: USB disconnect, device number 2 [ 14.298858] usb usb2: usb_suspend_both: status 0 [ 14.469833] usb 1-2: new high-speed USB device number 5 using tegra-xusb [ 14.490623] usb 1-2: New USB device found, idVendor=0424, idProduct=2744 [ 14.490628] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.490632] usb 1-2: Product: USB2744 [ 14.490637] usb 1-2: Manufacturer: Microchip Tech [ 14.491399] hub 1-2:1.0: USB hub found [ 14.491509] hub 1-2:1.0: 5 ports detected [ 14.610079] usb 2-3: new SuperSpeed USB device number 3 using tegra-xusb [ 14.630328] usb 2-3: New USB device found, idVendor=0424, idProduct=5744 [ 14.630333] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 14.630337] usb 2-3: Product: USB5744 [ 14.630341] usb 2-3: Manufacturer: Microchip Tech [ 14.632361] hub 2-3:1.0: USB hub found [ 14.632749] hub 2-3:1.0: 4 ports detected [ 14.777829] usb 1-2.5: new high-speed USB device number 6 using tegra-xusb [ 14.789828] usb 2-3: usb_suspend_both: status 0 [ 14.789985] usb usb2: usb_suspend_both: status 0 [ 14.798889] usb 1-2.5: New USB device found, idVendor=0424, idProduct=2740 [ 14.798895] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.798899] usb 1-2.5: Product: Hub Controller [ 14.798903] usb 1-2.5: Manufacturer: Microchip Tech [ 21.021830] usb 1-2.3: new high-speed USB device number 7 using tegra-xusb [ 21.055881] usb 1-2.3: New USB device found, idVendor=1e0e, idProduct=9001 [ 21.055888] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 21.055892] usb 1-2.3: Product: SimTech, Incorporated [ 21.055897] usb 1-2.3: Manufacturer: SimTech, Incorporated [ 21.055900] usb 1-2.3: SerialNumber: 0123456789ABCDEF [ 21.857869] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 21.858032] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 21.858153] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 21.858248] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 21.858386] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x0 [ 21.858485] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800080 [ 21.858587] tegra-i2c 3190000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 21.858709] tegra-i2c 3190000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 21.858825] tegra-i2c 3190000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 21.858943] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 21.859049] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 21.859152] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 21.863191] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 21.863196] Extcon AUX1(HDMI) enable [ 21.863748] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 21.863773] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 21.863834] tegradc 15210000.nvdisplay: DT parsed successfully [ 21.863870] tegradc 15210000.nvdisplay: Display dc.ffffff800d810000 registered with id=1 [ 21.864045] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 21.864052] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 21.871345] tegradc 15210000.nvdisplay: probed [ 21.871570] tegradc 15210000.nvdisplay: fb registered [ 21.881169] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 21.881457] Parent Clock set for DC pll_d [ 21.886339] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 21.890840] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 21.902219] dp lt: state 0 (Reset), pending_lt_evt 1 [ 21.902224] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 21.902231] dp lt: state 0 (Reset), pending_lt_evt 0 [ 21.904546] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 21.904557] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 21.905036] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 21.905052] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 21.905065] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 21.905076] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 21.905084] dp lt: tx_pu: 0x20 [ 21.905583] tegradc 15210000.nvdisplay: dp: aux write defer (0x10020000) -- 6 [ 21.907540] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 21.909280] dp lt: CR not done [ 21.910242] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 21.910249] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 21.910256] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 21.910279] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 21.910282] dp lt: CR retry [ 21.910286] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 21.910292] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 21.910307] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 21.910318] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 21.910329] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 21.910340] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 21.910347] dp lt: tx_pu: 0x40 [ 21.911567] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 21.913334] dp lt: CR done [ 21.913341] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 21.913349] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 21.914821] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 21.918811] dp lt: CE done [ 21.918816] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 21.918869] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 21.918890] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 21.920161] tegra-se-nvhost 15810000.se: initialized [ 21.921381] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 21.922057] tegra-se-nvhost 15820000.se: initialized [ 21.923390] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 21.924325] tegra-se-nvhost 15830000.se: initialized [ 21.925100] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 21.926290] tegra-se-nvhost 15840000.se: initialized [ 21.927358] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 21.928504] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 21.928675] hidraw: raw HID events driver (C) Jiri Kosina [ 21.929846] usbcore: registered new interface driver usbhid [ 21.929850] usbhid: USB HID core driver [ 21.934141] ashmem: initialized [ 21.934970] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 21.936018] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 21.936449] tegra186-aondbg aondbg: aondbg driver probe() OK [ 21.937028] denver_knobs_init:MTS_VERSION:54811859 [ 21.937320] tegra19x_actmon d230000.actmon: in actmon_register()... [ 21.937926] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 21.938325] t19x_cache tegra-cache: probed [ 21.940528] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 21.940536] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 21.940974] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 21.942108] PLL_AON clock registered [ 21.943413] Clocks initialized successfully [ 21.945397] nvpmodel: initialized successfully [ 21.946793] trusty-virtio trusty:virtio: initializing [ 21.946997] trusty_ipc virtio0: vring0: va(pa) ffffffc1f21f2000(0) qsz 32 notifyid 1 [ 21.947007] trusty_ipc virtio0: vring1: va(pa) ffffffc1f21cc000(0) qsz 32 notifyid 2 [ 21.947150] trusty-virtio trusty:virtio: initializing done [ 21.947362] trusty_ipc virtio0: is online [ 21.947762] tegra-hda 3510000.hda: Override SDO lines to 4 [ 21.948110] usbcore: registered new interface driver snd-usb-audio [ 21.964256] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 21.964448] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 21.964618] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 21.964803] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 22.021848] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 22.021866] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 22.033836] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 22.042624] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 22.042752] OPE platform probe [ 22.042877] OPE platform probe successful [ 22.069377] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 22.069855] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.070328] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 22.070809] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.071291] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.071767] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.072250] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.072707] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.073162] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.073615] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.074071] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.074544] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.075021] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 22.075498] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 22.075972] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.076436] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 22.076893] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 22.076899] tegradc 15210000.nvdisplay: blank - powerdown [ 22.118755] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 22.118916] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 22.119056] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 22.119173] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 22.119262] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 22.119266] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 22.119270] dp lt: state 0 (Reset), pending_lt_evt 0 [ 22.119276] dp lt: link training force disable [ 22.119279] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 22.119294] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 22.119408] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 22.119529] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 22.119646] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 22.119770] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 22.119900] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 22.120022] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 22.120144] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 22.120242] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 22.120338] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 22.120435] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 22.120530] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 22.120625] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 22.120722] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 22.120840] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 22.120966] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 22.140604] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 22.141180] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 22.141192] tegradc 15210000.nvdisplay: unblank [ 22.141313] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 22.141496] Parent Clock set for DC pll_d [ 22.146104] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 22.149033] u32 classifier [ 22.149036] Actions configured [ 22.149110] Initializing XFRM netlink socket [ 22.149722] NET: Registered protocol family 10 [ 22.150568] NET: Registered protocol family 17 [ 22.150581] NET: Registered protocol family 15 [ 22.150635] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 22.150740] Bluetooth: RFCOMM socket layer initialized [ 22.150760] Bluetooth: RFCOMM ver 1.11 [ 22.150768] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 22.150774] Bluetooth: HIDP socket layer initialized [ 22.150790] 9pnet: Installing 9P2000 support [ 22.150832] Key type dns_resolver registered [ 22.151061] Registered cp15_barrier emulation handler [ 22.151082] Registered setend emulation handler [ 22.152833] registered taskstats version 1 [ 22.153197] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 22.154303] OF: PCI: host bridge /pcie@14160000 ranges: [ 22.154320] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 22.154327] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 22.154332] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 22.157081] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 22.157102] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 22.157701] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 22.157715] dp lt: state 0 (Reset), pending_lt_evt 0 [ 22.160044] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 22.160052] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 22.160542] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 22.160555] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 22.160567] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 22.160577] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 22.160584] dp lt: tx_pu: 0x20 [ 22.161068] tegradc 15210000.nvdisplay: dp: aux write defer (0x10020000) -- 6 [ 22.162967] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 22.164684] dp lt: CR not done [ 22.165587] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 22.165591] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 22.165595] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 22.165598] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 22.165601] dp lt: CR retry [ 22.165604] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 22.165611] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 22.165627] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 22.165636] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 22.165646] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 22.165659] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 22.165665] dp lt: tx_pu: 0x40 [ 22.166809] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 22.168520] dp lt: CR done [ 22.168524] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 22.168531] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 22.169947] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 22.173751] dp lt: CE done [ 22.173755] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 22.190456] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 22.190937] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 22.191399] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.191860] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 22.192319] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.192778] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.193236] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.193694] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.194180] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.194650] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.195117] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.195582] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.196046] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.196511] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 22.196976] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 22.197440] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 22.197906] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 22.198371] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 22.198378] tegradc 15210000.nvdisplay: blank - powerdown [ 22.240510] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 22.240513] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 22.240517] dp lt: state 0 (Reset), pending_lt_evt 0 [ 22.240523] dp lt: link training force disable [ 22.240525] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 22.262203] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 22.262770] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 22.262781] tegradc 15210000.nvdisplay: unblank [ 22.262985] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 22.263130] Parent Clock set for DC pll_d [ 22.265858] tegra-pcie-dw 14160000.pcie: link is up [ 22.266089] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 22.266095] pci_bus 0004:00: root bus resource [bus 00-ff] [ 22.266101] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 22.266106] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 22.266110] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 22.266133] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 22.266276] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 22.266493] iommu: Adding device 0004:00:00.0 to group 58 [ 22.266906] pci 0004:01:00.0: [1f40:2263] type 00 class 0x010802 [ 22.267032] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 22.267658] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 22.268023] iommu: Adding device 0004:01:00.0 to group 59 [ 22.280319] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 22.280327] pci 0004:01:00.0: BAR 0: assigned [mem 0x1740000000-0x1740003fff 64bit] [ 22.280392] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 22.280398] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 22.280414] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 22.280461] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 22.280681] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 22.280689] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 22.280692] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 22.280697] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 22.280710] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 22.280712] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 22.280716] dp lt: state 0 (Reset), pending_lt_evt 0 [ 22.280803] aer 0004:00:00.0:pcie002: service driver aer loaded [ 22.281225] nvme nvme0: pci function 0004:01:00.0 [ 22.281366] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 22.282195] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 22.282468] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 22.282506] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 22.283034] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 22.283041] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 22.283550] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 22.283563] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 22.283575] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 22.283587] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 22.283594] dp lt: tx_pu: 0x20 [ 22.284074] tegradc 15210000.nvdisplay: dp: aux write defer (0x10020000) -- 6 [ 22.285976] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 22.287673] dp lt: CR not done [ 22.288564] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 22.288566] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 22.288568] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 22.288570] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 22.288577] dp lt: CR retry [ 22.288579] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 22.288584] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 22.288602] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 22.288614] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 22.288629] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 22.288641] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 22.288646] dp lt: tx_pu: 0x40 [ 22.289822] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 22.291559] dp lt: CR done [ 22.291563] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 22.291570] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 22.292996] tegradc 15210000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 22.296804] dp lt: CE done [ 22.296807] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 22.313518] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 22.313574] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 22.313579] Extcon DP: HPD enabled [ 22.313603] hpd: Display connected, hpd_switch 1 [ 22.313608] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 22.390291] OF: PCI: host bridge /pcie@141a0000 ranges: [ 22.390312] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 22.390321] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 22.390345] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 22.405352] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 22.466203] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 22.501842] tegra-pcie-dw 141a0000.pcie: link is up [ 22.502090] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 22.502098] pci_bus 0005:00: root bus resource [bus 00-ff] [ 22.502106] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 22.502112] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 22.502116] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 22.502139] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 22.502290] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 22.502510] iommu: Adding device 0005:00:00.0 to group 60 [ 22.502786] pci 0005:01:00.0: [8086:1563] type 00 class 0x020000 [ 22.502899] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit pref] [ 22.503065] pci 0005:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 22.503107] pci 0005:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 22.503674] pci 0005:01:00.0: PME# supported from D0 D3hot [ 22.503876] pci 0005:01:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 22.503882] pci 0005:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 22.503992] pci 0005:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 22.503997] pci 0005:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 22.505772] iommu: Adding device 0005:01:00.0 to group 61 [ 22.518698] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f402fffff] [ 22.518707] pci 0005:00:00.0: BAR 15: assigned [mem 0x1c00000000-0x1c002fffff 64bit pref] [ 22.518717] pci 0005:01:00.0: BAR 0: assigned [mem 0x1c00000000-0x1c001fffff 64bit pref] [ 22.518808] pci 0005:01:00.0: BAR 6: assigned [mem 0x1f40000000-0x1f4007ffff pref] [ 22.518814] pci 0005:01:00.0: BAR 4: assigned [mem 0x1c00200000-0x1c00203fff 64bit pref] [ 22.518872] pci 0005:01:00.0: BAR 7: assigned [mem 0x1f40080000-0x1f4017ffff 64bit] [ 22.518916] pci 0005:01:00.0: BAR 10: assigned [mem 0x1f40180000-0x1f4027ffff 64bit] [ 22.518945] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 22.518953] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f402fffff] [ 22.518971] pci 0005:00:00.0: bridge window [mem 0x1c00000000-0x1c002fffff 64bit pref] [ 22.518986] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 22.519028] pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 22.519356] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 22.519361] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 22.519367] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 22.519527] aer 0005:00:00.0:pcie002: service driver aer loaded [ 22.519794] ixgbe 0005:01:00.0: enabling device (0000 -> 0002) [ 22.786223] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 23.106224] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 23.426161] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 23.601260] ixgbe 0005:01:00.0: The EEPROM Checksum Is Not Valid [ 23.601510] ixgbe: probe of 0005:01:00.0 failed with error -5 [ 23.610196] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 23.615761] tegra194-isp5 14800000.isp: initialized [ 23.622739] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 23.625739] tegra194-vi5 15c10000.vi: initialized [ 23.631138] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 23.631248] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 23.631468] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 23.635557] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 23.635570] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 23.635575] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 23.635649] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 23.635677] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 23.635682] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 23.639846] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 23.639881] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 23.639886] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 23.640164] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 23.640203] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 23.640208] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 23.640694] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 23.640721] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 23.640726] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 23.640998] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 23.641834] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 23.720437] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 23.720870] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 23.721198] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 23.721419] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 23.721767] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 23.721864] tegra-capture-ivc ivc-bc00000.rtcpu:ivccontrol@3: no priority specified, using 99 as default [ 23.721972] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 23.722099] tegra-capture-ivc ivc-bc00000.rtcpu:ivccapture@4: no priority specified, using 99 as default [ 23.722279] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 23.722285] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 23.723685] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=1d7bd17f78528535d57449fa59ec355e37add4f8 [ 23.724133] Wake83 for irq=211 [ 23.724236] gpio tegra-gpio wake67 for gpio=48(G:0) [ 23.724341] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 23.724514] input: gpio-keys as /devices/gpio-keys/input/input4 [ 23.746199] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 23.754881] tegra_rtc c2a0000.rtc: setting system clock to 2023-01-25 16:12:48 UTC (1674663168) [ 23.755385] mmcblk mmc0:0001: Card claimed for testing. [ 23.790411] bpmp: mounted debugfs mirror [ 23.796438] ALSA device list: [ 23.796445] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 23.796448] #1: jetson-xaviernx-ape [ 23.798937] Freeing unused kernel memory: 8640K [ 23.839023] Root device found: PARTUUID=8c766cde-aac0-4513-8e3b-5442f786341e [ 24.066211] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 24.386246] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 24.498134] EXT4-fs (nvme0n1p1): 2 orphan inodes deleted [ 24.498142] EXT4-fs (nvme0n1p1): recovery complete [ 24.501528] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 24.508804] Rootfs mounted over PARTUUID=8c766cde-aac0-4513-8e3b-5442f786341e [ 24.525132] Switching from initrd to actual rootfs [ 24.594350] random: crng init done [ 24.600177] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.603517] cgroup: cgroup2: unknown option "nsdelegate" [ 24.608200] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 24.608837] systemd[1]: Detected architecture arm64. [ 24.615329] systemd[1]: Set hostname to . [ 24.684254] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 24.684269] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 24.706246] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 24.797547] systemd[1]: Created slice User and Session Slice. [ 24.798527] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 24.798750] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 24.799858] systemd[1]: Created slice System Slice. [ 24.800148] systemd[1]: Listening on RPCbind Server Activation Socket. [ 24.851207] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null) [ 24.919877] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 25.101553] systemd-journald[2407]: Received SIGTERM from PID 1 (systemd). [ 25.131245] systemd: 40 output lines suppressed due to ratelimiting [ 25.141470] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 25.142067] systemd[1]: Detected architecture arm64. [ 25.142873] systemd[1]: Set hostname to . [ 25.191463] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 25.191831] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 25.281459] systemd[1]: Started Journal Service. [ 25.286856] systemd[1]: Started Change rootfs to SSD in M.2 key M slot (nvme0n1p1). [ 25.288445] systemd[1]: Started Apply Kernel Variables. [ 25.288968] systemd[1]: systemd-udevd.service: Failed with result 'protocol'. [ 25.290847] systemd[1]: systemd-udev-trigger.service: Main process exited, code=killed, status=15/TERM [ 25.516849] systemd-journald[3207]: Received request to flush runtime journal from PID 1 [ 26.679780] using random self ethernet address [ 26.679917] using random host ethernet address [ 27.076561] cpu-throttle-alert cooling device registered. [ 27.076917] gpu-throttle-alert cooling device registered. [ 27.077253] aux-throttle-alert cooling device registered. [ 27.226290] Mass Storage Function, version: 2009/09/11 [ 27.226301] LUN: removable file: (no medium) [ 27.231568] using random self ethernet address [ 27.231694] using random host ethernet address [ 27.271728] rndis0: HOST MAC b2:e8:19:e4:80:d8 [ 27.272097] rndis0: MAC b2:e8:19:e4:80:d9 [ 27.273405] usb0: HOST MAC b2:e8:19:e4:80:da [ 27.273447] usb0: MAC b2:e8:19:e4:80:db [ 27.273474] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 27.292779] l4tbr0: port 1(rndis0) entered blocking state [ 27.292789] l4tbr0: port 1(rndis0) entered disabled state [ 27.298364] device rndis0 entered promiscuous mode [ 27.304895] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 27.322463] l4tbr0: port 2(usb0) entered blocking state [ 27.322471] l4tbr0: port 2(usb0) entered disabled state [ 27.323085] device usb0 entered promiscuous mode [ 27.334299] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 27.435822] usbcore: registered new interface driver option [ 27.435879] usbserial: USB Serial support registered for GSM modem (1-port) [ 27.436143] option 1-2.3:1.0: GSM modem (1-port) converter detected [ 27.437121] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 27.437297] option 1-2.3:1.1: GSM modem (1-port) converter detected [ 27.438533] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 27.440458] option 1-2.3:1.2: GSM modem (1-port) converter detected [ 27.440816] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 27.440968] option 1-2.3:1.3: GSM modem (1-port) converter detected [ 27.441339] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB3 [ 27.441490] option 1-2.3:1.4: GSM modem (1-port) converter detected [ 27.441775] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB4 [ 27.470023] android_work: did not send uevent (0 0 (null)) [ 27.542730] android_work: sent uevent USB_STATE=CONNECTED [ 27.597731] android_work: sent uevent USB_STATE=DISCONNECTED [ 27.641449] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.690717] android_work: sent uevent USB_STATE=CONNECTED [ 27.696813] configfs-gadget gadget: high-speed config #1: c [ 27.696843] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 27.696859] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 27.696871] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 27.696955] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 27.696969] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 27.696980] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 27.697006] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 27.697036] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 27.697053] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 27.697147] android_work: sent uevent USB_STATE=CONFIGURED [ 27.703317] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 27.703336] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 27.704939] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 27.705065] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 27.723329] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 27.723346] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 27.794410] ras_fhi_disable: FHI 473 disabled [ 27.795145] CPU4: shutdown [ 27.795254] psci: CPU4 killed (polled 0 ms) [ 27.850621] ras_fhi_disable: FHI 474 disabled [ 27.857851] CPU5: shutdown [ 27.857966] psci: CPU5 killed (polled 0 ms) [ 27.872704] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 27.954724] gpio tegra-gpio wake20 for gpio=52(G:4) [ 27.958530] net eth0: get_configure_l3v4_filter --> [ 27.959553] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.959827] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 27.959972] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 28.059437] zram: Added device: zram0 [ 28.066379] zram: Added device: zram1 [ 28.068331] zram: Added device: zram2 [ 28.070808] zram: Added device: zram3 [ 28.103332] zram0: detected capacity change from 0 to 1018863616 [ 28.125698] Adding 994980k swap on /dev/zram0. Priority:5 extents:1 across:994980k SS [ 28.135098] zram1: detected capacity change from 0 to 1018863616 [ 28.156598] Adding 994980k swap on /dev/zram1. Priority:5 extents:1 across:994980k SS [ 28.166153] zram2: detected capacity change from 0 to 1018863616 [ 28.181852] Adding 994980k swap on /dev/zram2. Priority:5 extents:1 across:994980k SS [ 28.188257] zram3: detected capacity change from 0 to 1018863616 [ 28.206126] Adding 994980k swap on /dev/zram3. Priority:5 extents:1 across:994980k SS [ 28.820024] Bridge firewalling registered [ 28.842429] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 28.917931] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 28.918470] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.918979] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 28.919491] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.920006] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.920511] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.921031] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.921527] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.922017] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.922519] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.923029] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.923535] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.924034] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 28.924527] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 28.925024] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 28.925512] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 28.926004] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 29.068069] Netfilter messages via NETLINK v0.30. [ 29.070058] ctnetlink v0.93: registering with nfnetlink. [ 29.086339] tegradc 15200000.nvdisplay: unblank [ 29.086380] tegradc 15210000.nvdisplay: unblank [ 29.263443] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 30.024110] fuse init (API version 7.26) [ 31.466321] l4tbr0: port 2(usb0) entered blocking state [ 31.466331] l4tbr0: port 2(usb0) entered forwarding state [ 31.466412] l4tbr0: port 1(rndis0) entered blocking state [ 31.466419] l4tbr0: port 1(rndis0) entered forwarding state [ 31.466511] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 31.466529] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 32.097867] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 32.098019] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 32.098160] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 32.098248] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 32.098359] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x0 [ 32.098450] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800080 [ 32.098567] tegra-i2c 3190000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 32.098667] tegra-i2c 3190000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 32.098771] tegra-i2c 3190000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 32.098877] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 32.098968] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 32.099071] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 32.763902] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 33.090207] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 33.410207] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 33.730226] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 33.803989] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.804004] Bluetooth: BNEP socket layer initialized [ 34.050271] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 34.370232] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 34.690316] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 35.010229] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 35.330337] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0 [ 40.786354] usb 1-2: USB disconnect, device number 5 [ 40.786365] usb 1-2.3: USB disconnect, device number 7 [ 40.787071] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 40.787177] option 1-2.3:1.0: device disconnected [ 40.789002] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 40.789074] option 1-2.3:1.1: device disconnected [ 40.789704] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 40.789738] option 1-2.3:1.2: device disconnected [ 40.791659] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 40.791727] option 1-2.3:1.3: device disconnected [ 40.798783] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 [ 40.798816] option 1-2.3:1.4: device disconnected [ 40.799839] usb 1-2.5: USB disconnect, device number 6 [ 40.949935] usb 2-3: USB disconnect, device number 3 [ 40.951358] usb usb2: usb_suspend_both: status 0 [ 41.209859] usb 1-2: new high-speed USB device number 8 using tegra-xusb [ 41.230843] usb 1-2: New USB device found, idVendor=0424, idProduct=2744 [ 41.230853] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 41.230859] usb 1-2: Product: USB2744 [ 41.230866] usb 1-2: Manufacturer: Microchip Tech [ 41.231896] hub 1-2:1.0: USB hub found [ 41.232008] hub 1-2:1.0: 5 ports detected [ 41.350129] usb 2-3: new SuperSpeed USB device number 4 using tegra-xusb [ 41.370470] usb 2-3: New USB device found, idVendor=0424, idProduct=5744 [ 41.370480] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 41.370486] usb 2-3: Product: USB5744 [ 41.370492] usb 2-3: Manufacturer: Microchip Tech [ 41.372645] hub 2-3:1.0: USB hub found [ 41.373042] hub 2-3:1.0: 4 ports detected [ 41.517855] usb 1-2.5: new high-speed USB device number 9 using tegra-xusb [ 41.529843] usb 2-3: usb_suspend_both: status 0 [ 41.530056] usb usb2: usb_suspend_both: status 0 [ 41.538936] usb 1-2.5: New USB device found, idVendor=0424, idProduct=2740 [ 41.538946] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 41.538952] usb 1-2.5: Product: Hub Controller [ 41.538958] usb 1-2.5: Manufacturer: Microchip Tech [ 42.337867] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 42.338051] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 42.338173] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 42.338266] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 42.338382] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x0 [ 42.338501] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800080 [ 42.338600] tegra-i2c 3190000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 42.338706] tegra-i2c 3190000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 42.338815] tegra-i2c 3190000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 42.338931] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 42.339047] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 42.339150] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 47.613879] usb 1-2.3: new high-speed USB device number 10 using tegra-xusb [ 47.647971] usb 1-2.3: New USB device found, idVendor=1e0e, idProduct=9001 [ 47.647980] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 47.647987] usb 1-2.3: Product: SimTech, Incorporated [ 47.647992] usb 1-2.3: Manufacturer: SimTech, Incorporated [ 47.647998] usb 1-2.3: SerialNumber: 0123456789ABCDEF [ 47.650705] option 1-2.3:1.0: GSM modem (1-port) converter detected [ 47.651224] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 47.651677] option 1-2.3:1.1: GSM modem (1-port) converter detected [ 47.652025] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 47.652366] option 1-2.3:1.2: GSM modem (1-port) converter detected [ 47.652638] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 47.652983] option 1-2.3:1.3: GSM modem (1-port) converter detected [ 47.653217] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB3 [ 47.653485] option 1-2.3:1.4: GSM modem (1-port) converter detected [ 47.653691] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB4 [ 52.577868] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 52.578052] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 52.578182] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 52.578274] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 52.578414] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x0 [ 52.578512] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800080 [ 52.578622] tegra-i2c 3190000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 52.578727] tegra-i2c 3190000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 52.578837] tegra-i2c 3190000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 52.578974] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 52.579066] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 52.579172] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 54.625947] vdd-sdmmc1-sw: disabling [ 54.625953] vdd-1v8-sd: disabling [ 54.625958] vdd-1v8-cvb: disabling [ 54.625961] vdd-epb-1v0: disabling [ 54.625964] avdd-cam-2v8: disabling [ 54.625967] vdd-fan: disabling [ 54.625971] vdd_sys_en: disabling [ 62.912981] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 62.913141] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 62.913258] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 62.913351] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 62.913478] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x0 [ 62.913573] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800080 [ 62.913707] tegra-i2c 3190000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 62.913817] tegra-i2c 3190000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 62.913930] tegra-i2c 3190000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 62.914040] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 62.914135] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 62.914265] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 67.478917] usb 1-2: USB disconnect, device number 8 [ 67.478930] usb 1-2.3: USB disconnect, device number 10 [ 67.479753] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 67.479837] option 1-2.3:1.0: device disconnected [ 67.480392] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 67.480438] option 1-2.3:1.1: device disconnected [ 67.481597] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 67.481645] option 1-2.3:1.2: device disconnected [ 67.482047] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 67.482092] option 1-2.3:1.3: device disconnected [ 67.486765] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 [ 67.486822] option 1-2.3:1.4: device disconnected [ 67.487820] usb 1-2.5: USB disconnect, device number 9 [ 67.692677] usb 2-3: USB disconnect, device number 4 [ 67.693972] usb usb2: usb_suspend_both: status 0 [ 67.897588] usb 1-2: new high-speed USB device number 11 using tegra-xusb [ 67.918671] usb 1-2: New USB device found, idVendor=0424, idProduct=2744 [ 67.918692] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 67.918699] usb 1-2: Product: USB2744 [ 67.918706] usb 1-2: Manufacturer: Microchip Tech [ 67.919693] hub 1-2:1.0: USB hub found [ 67.919843] hub 1-2:1.0: 5 ports detected [ 68.038520] usb 2-3: new SuperSpeed USB device number 5 using tegra-xusb [ 68.058948] usb 2-3: New USB device found, idVendor=0424, idProduct=5744 [ 68.058958] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 68.058964] usb 2-3: Product: USB5744 [ 68.058970] usb 2-3: Manufacturer: Microchip Tech [ 68.061183] hub 2-3:1.0: USB hub found [ 68.061591] hub 2-3:1.0: 4 ports detected [ 68.207010] usb 1-2.5: new high-speed USB device number 12 using tegra-xusb [ 68.219056] usb 2-3: usb_suspend_both: status 0 [ 68.219273] usb usb2: usb_suspend_both: status 0 [ 68.228198] usb 1-2.5: New USB device found, idVendor=0424, idProduct=2740 [ 68.228209] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 68.228215] usb 1-2.5: Product: Hub Controller [ 68.228221] usb 1-2.5: Manufacturer: Microchip Tech [ 73.203199] tegra-i2c 3190000.i2c: rx dma timeout txlen:28 rxlen:128 [ 73.203353] tegra-i2c 3190000.i2c: --- register dump for debugging ---- [ 73.203478] tegra-i2c 3190000.i2c: I2C_CNFG - 0x22c00 [ 73.203572] tegra-i2c 3190000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 73.203688] tegra-i2c 3190000.i2c: I2C_FIFO_CONTROL - 0x0 [ 73.203786] tegra-i2c 3190000.i2c: I2C_FIFO_STATUS - 0x800080 [ 73.203891] tegra-i2c 3190000.i2c: I2C_MST_FIFO_CONTROL - 0x70 [ 73.203999] tegra-i2c 3190000.i2c: I2C_MST_FIFO_STATUS - 0x7c0000 [ 73.204109] tegra-i2c 3190000.i2c: I2C_MST_PACKET_TRANSFER_CNT - 0x0 [ 73.204224] tegra-i2c 3190000.i2c: I2C_INT_MASK - 0x6c [ 73.204318] tegra-i2c 3190000.i2c: I2C_INT_STATUS - 0x2 [ 73.204425] tegra-i2c 3190000.i2c: i2c transfer timed out addr: 0x50 [ 74.205366] usb 1-2.3: new high-speed USB device number 13 using tegra-xusb [ 74.239442] usb 1-2.3: New USB device found, idVendor=1e0e, idProduct=9001 [ 74.239451] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.239458] usb 1-2.3: Product: SimTech, Incorporated [ 74.239463] usb 1-2.3: Manufacturer: SimTech, Incorporated [ 74.239468] usb 1-2.3: SerialNumber: 0123456789ABCDEF [ 74.242038] option 1-2.3:1.0: GSM modem (1-port) converter detected [ 74.242475] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 74.242798] option 1-2.3:1.1: GSM modem (1-port) converter detected [ 74.243002] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 74.243233] option 1-2.3:1.2: GSM modem (1-port) converter detected [ 74.243466] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB2 [ 74.243687] option 1-2.3:1.3: GSM modem (1-port) converter detected [ 74.243953] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB3 [ 74.245177] option 1-2.3:1.4: GSM modem (1-port) converter detected [ 74.245486] usb 1-2.3: GSM modem (1-port) converter now attached to ttyUSB4