[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-rt168-tegra (user@user) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #2 SMP PREEMPT RT Thu Oct 21 13:48:27 +03 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92ca9000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s60608 r8192 d29504 u98304 [ 0.000000] pcpu-alloc: s60608 r8192 d29504 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92ca9000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29772(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3556276K/4159488K available (15294K kernel code, 2978K rwdata, 6748K rodata, 8576K init, 620K bss, 128076K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009610000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e70000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a158808 ( 2979 KB) [ 0.000000] .bss : 0xffffff800a158808 - 0xffffff800a1f3930 ( 621 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU kthread priority: 1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001638] Console: colour dummy device 80x25 [ 0.001662] console [tty0] enabled [ 0.001666] bootconsole [uart8250] disabled [ 0.001686] kmemleak: Kernel memory leak detector disabled [ 0.001710] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001714] pid_max: default: 32768 minimum: 301 [ 0.002172] Security Framework initialized [ 0.002399] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002407] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003634] ftrace: allocating 46781 entries in 183 pages [ 0.176143] sched-energy: CPU device node has no sched-energy-costs [ 0.176181] ASID allocator initialised with 65536 entries [ 0.232173] tegra-id: chipid=22117. [ 0.232188] tegra-id: opt_subrevision=0. [ 0.232205] Tegra Speedo/IDDQ fuse revision 4 [ 0.232211] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.232215] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.232270] Tegra: CPU Speedo Value 1967, SoC Speedo Value 1894, GPU Speedo Value 1961 [ 0.232274] Tegra: CPU IDDQ Value 1408, SoC IDDQ Value 1644, GPU IDDQ Value 1885 [ 0.232298] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.232319] DTS File Name: /home/user/Desktop/nano_jp46_kernel_rt_patch/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.232326] DTB Build time: Oct 21 2021 13:44:07 [ 0.293125] CPU1: Booted secondary processor [411fd071] [ 0.337013] CPU2: Booted secondary processor [411fd071] [ 0.381017] CPU3: Booted secondary processor [411fd071] [ 0.381162] Brought up 4 CPUs [ 0.381173] SMP: Total of 4 processors activated. [ 0.381182] CPU features: detected feature: 32-bit EL0 Support [ 0.381447] CPU: All CPU(s) started at EL2 [ 0.381464] alternatives: patching kernel code [ 0.390003] devtmpfs: initialized [ 0.428552] Initilizing CustomIPI irq domain [ 0.428899] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.428922] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.440769] pinctrl core: initialized pinctrl subsystem [ 0.441494] OS set in device tree is not L4T. [ 0.441981] regulator-dummy: no parameters [ 0.442272] Initializing plugin-manager [ 0.442435] Plugin module not found [ 0.442627] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.443164] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.443870] node /plugin-manager/fragment@5 match with board 3449-0000-200 [ 0.444455] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.444678] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.444958] node /plugin-manager/fragement@9 match with board <3448-0000-300 [ 0.448684] NET: Registered protocol family 16 [ 0.450122] pstore: using zlib compression [ 0.450158] console [pstore-1] enabled [ 0.450162] pstore: Registered ramoops as persistent store backend [ 0.450168] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.451410] cpuidle: using governor menu [ 0.455947] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.457825] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e74000) [ 0.457848] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.461624] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.464084] Serial: AMBA PL011 UART driver [ 0.464599] tegra_powergate_init: DONE [ 0.464615] DTS File Name: /home/user/Desktop/nano_jp46_kernel_rt_patch/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.464623] DTB Build time: Oct 21 2021 13:44:07 [ 0.466647] Tegra reboot handler registered. [ 0.471478] iommu: Adding device tegra-carveouts to group 0 [ 0.471613] platform tegra-carveouts: domain=ffffffc0f9739cd8 allocates as[0]=ffffffc0f9150100 [ 0.471995] iommu: Adding device smmu_test to group 1 [ 0.472060] platform smmu_test: domain=ffffffc0f9739e58 allocates as[0]=ffffffc0f91501e8 [ 0.472938] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.472998] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.473126] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.473136] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.473187] mc-err: mcerr ops are set to t21x [ 0.484368] iommu: Adding device 70090000.xusb to group 2 [ 0.484668] iommu: Adding device 70006000.serial to group 3 [ 0.484764] platform 70006000.serial: domain=ffffffc0f9750618 allocates as[0]=ffffffc0f91502d0 [ 0.485289] iommu: Adding device 70006040.serial to group 4 [ 0.485569] iommu: Adding device 70006200.serial to group 5 [ 0.485761] iommu: Adding device sound to group 6 [ 0.485818] platform sound: domain=ffffffc0f9750918 allocates as[0]=ffffffc0f91503b8 [ 0.486419] iommu: Adding device 7000d400.spi to group 7 [ 0.486700] iommu: Adding device 7000d600.spi to group 8 [ 0.487022] iommu: Adding device 70410000.spi to group 9 [ 0.487348] iommu: Adding device 50000000.host1x to group 10 [ 0.487636] iommu: Adding device 54080000.vi to group 11 [ 0.488050] iommu: Adding device 54600000.isp to group 12 [ 0.488329] iommu: Adding device 54680000.isp to group 13 [ 0.488636] iommu: Adding device tegradc.0 to group 14 [ 0.488696] platform tegradc.0: domain=ffffffc0f90c60d8 allocates as[0]=ffffffc0f91504a0 [ 0.492967] platform tegradc.0: IOVA linear map 0x0000000092ca9000(800000) [ 0.493389] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.493787] iommu: Adding device tegradc.1 to group 15 [ 0.493856] platform tegradc.1: domain=ffffffc0f90c6258 allocates as[0]=ffffffc0f9150588 [ 0.498026] platform tegradc.1: IOVA linear map 0x0000000092ca9000(800000) [ 0.498414] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.498683] iommu: Adding device 54340000.vic to group 16 [ 0.498894] iommu: Adding device 544c0000.nvenc to group 17 [ 0.499109] iommu: Adding device 54500000.tsec to group 18 [ 0.499312] iommu: Adding device 54100000.tsecb to group 19 [ 0.499550] iommu: Adding device 54480000.nvdec to group 20 [ 0.499774] iommu: Adding device 54380000.nvjpg to group 21 [ 0.500892] iommu: Adding device 546c0000.i2c to group 22 [ 0.501298] iommu: Adding device 57000000.gpu to group 23 [ 0.501366] platform 57000000.gpu: domain=ffffffc0f90c6918 allocates as[0]=ffffffc0f9150670 [ 0.501410] platform 57000000.gpu: domain=ffffffc0f90c6918 allocates as[1]=ffffffc0f9150758 [ 0.501482] platform 57000000.gpu: domain=ffffffc0f90c6918 allocates as[2]=ffffffc0f9150840 [ 0.501522] platform 57000000.gpu: domain=ffffffc0f90c6918 allocates as[3]=ffffffc0f9150928 [ 0.502469] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.502480] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.502493] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.502498] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.502503] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.553283] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.553292] tegra-pmc: Clear bootloader IO dpd settings [ 0.553317] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.553386] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.553722] iommu: Adding device 70012000.se to group 24 [ 0.554620] iommu: Adding device 7000c000.i2c to group 25 [ 0.554896] iommu: Adding device 7000c400.i2c to group 26 [ 0.555240] iommu: Adding device 7000c500.i2c to group 27 [ 0.555520] iommu: Adding device 7000c700.i2c to group 28 [ 0.555879] iommu: Adding device 7000d000.i2c to group 29 [ 0.556154] iommu: Adding device 7000d100.i2c to group 30 [ 0.556546] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.556636] platform sdhci-tegra.0: domain=ffffffc0f97a2618 allocates as[0]=ffffffc0f9150a10 [ 0.557584] iommu: Adding device 700d0000.xudc to group 32 [ 0.561418] vdd-ac-bat: 5000 mV [ 0.561919] vdd-5v0-sys: 5000 mV [ 0.562632] vdd-5v0-hdmi: 5000 mV [ 0.563136] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.563419] vdd-1v8-sys: 1800 mV [ 0.563880] vdd-fan: 5000 mV [ 0.564117] vdd-fan: supplied by vdd-5v0-sys [ 0.564372] vdd-usb-vbus: 5000 mV [ 0.564621] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.565135] vdd-usb-vbus2: 5000 mV [ 0.587950] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.590584] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.591754] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.592134] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.600984] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.601451] SCSI subsystem initialized [ 0.601682] libata version 3.00 loaded. [ 0.601991] usbcore: registered new interface driver usbfs [ 0.602042] usbcore: registered new interface driver hub [ 0.602089] usbcore: registered new device driver usb [ 0.607553] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.613437] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.614701] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.617083] vdd-ddr-1v1: 1150 mV [ 0.621393] vdd-pre-reg-1v35: 1350 mV [ 0.625042] vdd-1v8: 1800 mV [ 0.629377] avdd-sys-1v2: 1200 mV [ 0.633133] vdd-pex-1v0: 1050 mV [ 0.633918] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.634503] max77620-ldo3: at 3100 mV [ 0.637049] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.637656] max77620-ldo5: at 3100 mV [ 0.638232] max77620-ldo6: at 2800 mV [ 0.641106] avdd-1v05-pll: 1050 mV [ 0.645057] avdd-io-hdmi-dp: 1050 mV [ 0.648013] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.648340] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.648658] max77620 4-003c: max77620 probe successful [ 0.652199] media: Linux media interface: v0.10 [ 0.652268] Linux video capture interface: v2.00 [ 0.653407] pps_core: LinuxPPS API ver. 1 registered [ 0.653417] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.653442] PTP clock support registered [ 0.656827] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.657838] Advanced Linux Sound Architecture Driver Initialized. [ 0.658545] Bluetooth: Core ver 2.22 [ 0.658605] NET: Registered protocol family 31 [ 0.658609] Bluetooth: HCI device and connection manager initialized [ 0.658625] Bluetooth: HCI socket layer initialized [ 0.658635] Bluetooth: L2CAP socket layer initialized [ 0.658694] Bluetooth: SCO socket layer initialized [ 0.660556] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.660573] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.660619] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.660633] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.664139] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.665492] vdd-3v3-sys: 3300 mV [ 0.665893] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.665953] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.669229] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.669717] vdd-3v3-sd: 3300 mV [ 0.670119] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.670910] avdd-io-edp-1v05: 1050 mV [ 0.671316] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.671534] vdd-usb-hub-en: 5000 mV [ 0.671899] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.673218] camchar: rtcpu character device driver loaded [ 0.674166] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.675743] clocksource: Switched to clocksource arch_sys_counter [ 0.725533] VFS: Disk quotas dquot_6.6.0 [ 0.725668] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.726197] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.726670] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.726688] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.726990] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.726998] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.727013] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.727061] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.727067] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.727082] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.727090] nvmap_page_pool_init: Total RAM pages: 1007853 [ 0.727096] nvmap_page_pool_init: nvmap page pool size: 125981 pages (492 MB) [ 0.727186] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.727633] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.728832] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.738490] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.738962] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.739345] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.739643] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.739948] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.740278] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.740282] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.740779] NET: Registered protocol family 2 [ 0.741985] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.742252] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) [ 0.744415] TCP: Hash tables configured (established 32768 bind 32768) [ 0.744614] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.744919] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.745718] NET: Registered protocol family 1 [ 0.746468] RPC: Registered named UNIX socket transport module. [ 0.746474] RPC: Registered udp transport module. [ 0.746479] RPC: Registered tcp transport module. [ 0.746483] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.746499] PCI: CLS 0 bytes, default 64 [ 0.746793] Trying to unpack rootfs image as initramfs... [ 1.048284] Freeing initrd memory: 6992K [ 1.058574] host1x 50000000.host1x: initialized [ 1.060731] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.062525] audit: initializing netlink subsys (disabled) [ 1.062607] audit: type=2000 audit(0.911:1): initialized [ 1.063416] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.074902] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.076508] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.077404] 9p: Installing v9fs 9p2000 file system support [ 1.081326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.081453] io scheduler noop registered [ 1.081896] io scheduler cfq registered (default) [ 1.084969] gic 702f9000.agic: GIC IRQ controller registered [ 1.088070] iommu: Adding device 702ef000.adsp to group 33 [ 1.097150] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.097348] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.098018] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8208c11 [ 1.098027] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.099886] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.100001] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.100114] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.100316] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.100413] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.100506] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.100606] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.100707] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.100800] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.100891] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.107646] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.109805] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.112131] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.113411] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.113941] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.115253] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.115500] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 1.115947] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.116004] Adding domain tsec-pd to PM domain host1x-pd [ 1.119372] tsec 54500000.tsec: initialized [ 1.120938] tsec 54100000.tsecb: initialized [ 1.121731] Adding domain nvdec-pd to PM domain host1x-pd [ 1.125256] nvdec 54480000.nvdec: initialized [ 1.126387] Adding domain vic03-pd to PM domain host1x-pd [ 1.126562] Adding domain msenc-pd to PM domain host1x-pd [ 1.126722] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.131274] falcon 54340000.vic: initialized [ 1.132628] falcon 544c0000.nvenc: initialized [ 1.134029] falcon 54380000.nvjpg: initialized [ 1.138889] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.138939] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.138967] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.139305] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.139422] display board info: id 0x0, fab 0x0 [ 1.139497] generic_infoframe_type: 0x87 [ 1.139541] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.139546] tegra_cec 70015000.tegra_cec: probed [ 1.139664] tegradc tegradc.0: DT parsed successfully [ 1.139722] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.140607] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.144538] tegradc tegradc.0: probed [ 1.159996] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.167572] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.168928] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.168936] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.169392] kfuse 7000fc00.kfuse: initialized [ 1.171204] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.172331] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.173445] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.173456] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.173910] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.175357] vdd-gpu: applied init 1000000uV constraint [ 1.175367] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.175846] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.177818] Console: switching to colour frame buffer device 240x67 [ 1.177945] tegradc tegradc.0: fb registered [ 1.180751] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.180863] No Device Node present for smmu client: serial8250 !! [ 1.180873] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.180916] iommu: Adding device serial8250 to group 35 [ 1.183660] console [ttyS0] disabled [ 1.183956] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.184066] console [ttyS0] enabled [ 1.185277] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.185617] serial-tegra 70006200.serial: RX in PIO mode [ 1.185724] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.186070] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.186116] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.186657] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.186670] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.186873] [drm] Initialized [ 1.198519] brd: module loaded [ 1.204912] loop: module loaded [ 1.205019] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.205151] tegra_profiler: auth: init [ 1.206713] THERMAL EST: found 2 subdevs [ 1.206722] THERMAL EST num_resources: 0 [ 1.206729] [THERMAL EST subdev 0] [ 1.206736] [THERMAL EST subdev 1] [ 1.207226] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.207230] THERMAL EST: thz register success. [ 1.207444] THERMAL EST: end of probe, return err: 0 [ 1.208962] sd: No Scsi addr parsed to reserve index [ 1.209006] hisi_sas: driver version v1.6 [ 1.213070] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.213082] Extcon AUX1(HDMI) enable [ 1.214397] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.214514] tegradc tegradc.1: No lt-data, using default setting [ 1.214558] tegradc tegradc.1: No hpd-gpio in DT [ 1.214608] tegradc tegradc.1: DT parsed successfully [ 1.214672] tegradc tegradc.1: Display dc.ffffff800d500000 registered with id=1 [ 1.215583] tegra-qspi 70410000.spi: Prod settings list not found [ 1.216366] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.217116] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.217125] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.226897] libphy: Fixed MDIO Bus: probed [ 1.227636] tun: Universal TUN/TAP device driver, 1.6 [ 1.227639] tun: (C) 1999-2004 Max Krasnyansky [ 1.231005] tegradc tegradc.1: probed [ 1.231195] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.231200] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.231627] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.231633] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.231684] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.231688] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.231835] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.231839] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.231880] tegradc tegradc.1: fb registered [ 1.233322] PPP generic driver version 2.4.2 [ 1.235182] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.235189] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.235200] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.235217] tegradc tegradc.1: blank - powerdown [ 1.235240] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.235246] Extcon DP: HPD disabled [ 1.235251] hpd: hpd_switch 0 [ 1.235256] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.235265] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.235272] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.239867] PPP BSD Compression module registered [ 1.239876] PPP Deflate Compression module registered [ 1.239908] PPP MPPE Compression module registered [ 1.239916] NET: Registered protocol family 24 [ 1.240014] usbcore: registered new interface driver r8152 [ 1.240058] usbcore: registered new interface driver asix [ 1.240117] usbcore: registered new interface driver ax88179_178a [ 1.240152] usbcore: registered new interface driver cdc_ether [ 1.240190] usbcore: registered new interface driver net1080 [ 1.240224] usbcore: registered new interface driver cdc_subset [ 1.240256] usbcore: registered new interface driver zaurus [ 1.240309] usbcore: registered new interface driver cdc_ncm [ 1.240527] VFIO - User Level meta-driver version: 0.3 [ 1.242564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.242595] ehci-pci: EHCI PCI platform driver [ 1.242637] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.242650] ohci-pci: OHCI PCI platform driver [ 1.242697] ohci-platform: OHCI generic platform driver [ 1.245898] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.246527] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.248779] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.249197] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f92d6800 id [ 1.250385] usbcore: registered new interface driver uas [ 1.250439] usbcore: registered new interface driver usb-storage [ 1.250514] usbcore: registered new interface driver usbserial [ 1.252747] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.252803] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.252827] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.253569] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.253695] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.253856] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.253860] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.253865] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.253870] usb usb1: Product: xHCI Host Controller [ 1.253875] usb usb1: Manufacturer: Linux 4.9.253-rt168-tegra xhci-hcd [ 1.253879] usb usb1: SerialNumber: 70090000.xusb [ 1.254352] hub 1-0:1.0: USB hub found [ 1.254389] hub 1-0:1.0: 5 ports detected [ 1.254921] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.254932] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.254944] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.254965] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.254969] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.254981] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.254988] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.255059] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.255164] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.255170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.255175] usb usb2: Product: xHCI Host Controller [ 1.255179] usb usb2: Manufacturer: Linux 4.9.253-rt168-tegra xhci-hcd [ 1.255183] usb usb2: SerialNumber: 70090000.xusb [ 1.255814] mousedev: PS/2 mouse device common for all mice [ 1.255840] hub 2-0:1.0: USB hub found [ 1.255881] hub 2-0:1.0: 4 ports detected [ 1.255883] usbcore: registered new interface driver xpad [ 1.256655] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.256662] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.347288] tegradc tegradc.0: blank - powerdown [ 1.368099] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.368415] usb usb2: usb_suspend_both: status 0 [ 1.370282] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.372512] rtc rtc1: alarm rtc device [ 1.372526] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.372549] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.372962] i2c /dev entries driver [ 1.374491] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.384778] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.384781] Extcon AUX1(HDMI) disable [ 1.397790] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.397863] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.397941] imx219 6-0010: board setup failed [ 1.398010] imx219: probe of 6-0010 failed with error -121 [ 1.399033] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.401222] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.401227] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.401618] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.401632] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.401639] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.401812] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.401824] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.401830] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.401992] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.402001] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.402006] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.402181] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.402746] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.402790] tegra_aotag tegra-aotag: Invalid temp readout [ 1.402814] tegra_aotag tegra-aotag: Invalid temp readout [ 1.402832] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.402840] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.403842] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.403858] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.404062] tegra_aotag tegra-aotag: Invalid temp readout [ 1.404088] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.404549] parse_throttle_dt_data: Num cap clks = 6 [ 1.404554] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.404560] parse_throttle_dt_data: clk=gpu type=4 [ 1.404579] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.404596] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.404615] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.404618] parse_throttle_dt_data: clk=emc type=3 [ 1.405020] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.405155] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.405325] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.406595] FAN dev name: pwm-fan [ 1.406709] FAN:gpio request success. [ 1.406797] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.407216] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.407459] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.407469] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.407584] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.407589] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.407593] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.407597] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.407601] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.407605] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.407608] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.407612] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.407616] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.407620] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.411351] device-mapper: uevent: version 1.0.3 [ 1.412059] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.414252] tegradc tegradc.0: unblank [ 1.417176] tegra210-cpufreq cpufreq: probe()...completed [ 1.417946] sdhci: Secure Digital Host Controller Interface driver [ 1.417947] sdhci: Copyright(c) Pierre Ossman [ 1.417949] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.418519] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.418958] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.419091] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.424002] tegra-se 70012000.se: tegra_se_probe: complete [ 1.424634] hidraw: raw HID events driver (C) Jiri Kosina [ 1.425888] usbcore: registered new interface driver usbhid [ 1.425889] usbhid: USB HID core driver [ 1.428442] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.428720] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.429693] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 1.429750] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 1.430932] nvpmodel: initialized successfully [ 1.430997] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.432068] usbcore: registered new interface driver snd-usb-audio [ 1.432133] No Device Node present for smmu client: snd-soc-dummy !! [ 1.432137] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.432155] iommu: Adding device snd-soc-dummy to group 36 [ 1.440588] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.456982] OPE platform probe [ 1.457093] OPE platform probe successful [ 1.457349] OPE platform probe [ 1.457458] OPE platform probe successful [ 1.463912] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.465807] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.465809] Extcon AUX1(HDMI) enable [ 1.481229] tegradc tegradc.0: sync windows ret = 248 [ 1.485100] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.485240] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.485372] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.485502] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.485631] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.485761] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.485894] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.486022] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.486157] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.486289] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.492183] random: fast init done [ 1.503158] u32 classifier [ 1.503160] Actions configured [ 1.503240] Initializing XFRM netlink socket [ 1.504093] NET: Registered protocol family 10 [ 1.504796] NET: Registered protocol family 17 [ 1.504807] NET: Registered protocol family 15 [ 1.504888] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.504941] Bluetooth: RFCOMM socket layer initialized [ 1.504952] Bluetooth: RFCOMM ver 1.11 [ 1.504957] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.504962] Bluetooth: HIDP socket layer initialized [ 1.504979] 9pnet: Installing 9P2000 support [ 1.505018] Key type dns_resolver registered [ 1.505400] Registered cp15_barrier emulation handler [ 1.505407] Registered setend emulation handler [ 1.506595] registered taskstats version 1 [ 1.507157] Adding domain ve2-pd to PM domain host1x-pd [ 1.507413] Adding domain ve-pd to PM domain host1x-pd [ 1.511807] isp 54600000.isp: initialized [ 1.512714] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.512717] Extcon HDMI: HPD enabled [ 1.512738] tegradc tegradc.0: hdmi: plugged [ 1.512900] isp 54680000.isp: initialized [ 1.527091] last reset is due to power on reset [ 1.527096] KERNEL: PMC reset status reg: 0x0 [ 1.527157] BL: PMC reset status reg: 0x0 [ 1.527160] BL: PMIC poweroff Event Recorder: 0x40 [ 1.528803] clk_cbus_recalc_rate: no gbus parent [ 1.528809] clk_cbus_round_rate: no gbus parent [ 1.528812] clk_cbus_round_rate: no gbus parent [ 1.528817] clk_cbus_recalc_rate: no gbus parent [ 1.528925] clk_cbus_recalc_rate: no gbus parent [ 1.528929] clk_cbus_round_rate: no gbus parent [ 1.528931] clk_cbus_round_rate: no gbus parent [ 1.528936] clk_cbus_recalc_rate: no gbus parent [ 1.529609] tegra_dvfs: GPU-cap: registered [ 1.529670] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.529673] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 1.529676] tegra dvfs: vdd-gpu: nominal 1098mV, offset 708000uV, step 10000uV, scaling enabled [ 1.531166] tegra_dvfs: vdd-gpu-vts: registered [ 1.531986] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.532662] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.533336] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.541750] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.564812] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:12 UTC (946688412) [ 1.565821] vi 54080000.vi: vi_probe: ++ [ 1.569268] vi 54080000.vi: initialized [ 1.571306] vi 54080000.vi: subdev nvcsi--1 bound [ 1.572845] Disable partitions left on by BL [ 1.572849] disb [ 1.572899] bwmgr: missing cdev-type property [ 1.573000] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.573008] DRAM derating cdev registered. [ 1.573911] ALSA device list: [ 1.573914] #0: tegra-hda at 0x70038000 irq 83 [ 1.573917] #1: tegra-snd-t210ref-mobile-rt565x [ 1.577300] Freeing unused kernel memory: 8576K [ 1.591787] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.603774] Root device found: mmcblk0p1 [ 1.629533] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.629538] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.629542] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.629545] usb 1-2: Manufacturer: Generic [ 1.630800] hub 1-2:1.0: USB hub found [ 1.631951] hub 1-2:1.0: 4 ports detected [ 1.664053] mmc0: hw tuning done ... [ 1.664089] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 1.664584] mmcblk0: mmc0:aaaa SB64G 59.5 GiB [ 1.671274] mmcblk0: p1 [ 1.740559] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.755814] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 1.775649] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 1.775655] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.775659] usb 2-1: Product: 4-Port USB 3.1 Hub [ 1.775662] usb 2-1: Manufacturer: Generic [ 1.775799] usb 1-2: usb_suspend_both: status 0 [ 1.775882] usb usb1: usb_suspend_both: status 0 [ 1.781227] hub 2-1:1.0: USB hub found [ 1.782707] hub 2-1:1.0: 4 ports detected [ 1.808999] Found dev node: /dev/mmcblk0p1 [ 1.939763] usb 2-1: usb_suspend_both: status 0 [ 1.939922] usb usb2: usb_suspend_both: status 0 [ 1.944818] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.163773] tegra_cec 70015000.tegra_cec: physical address: 20:00. [ 2.228339] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.228343] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.349697] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.351779] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.367294] EXT4-fs (mmcblk0p1): recovery complete [ 2.368421] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.370410] Rootfs mounted over mmcblk0p1 [ 2.386447] Switching from initrd to actual rootfs [ 2.457180] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.457187] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.457191] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.457195] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.457199] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.457219] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.457281] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.457471] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.457579] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.457602] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.457631] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.457651] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.457782] pci 0000:01:00.0: supports D1 D2 [ 2.457785] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.467827] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.467865] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.467869] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.467875] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.467893] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.467908] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.467916] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.467920] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.467925] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.468335] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.468339] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.468345] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.468557] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.468775] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.468792] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.482832] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.482900] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e6:30:29 from device tree [ 2.483525] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.483541] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.571711] systemd[1]: System time before build time, advancing clock. [ 2.605582] cgroup: cgroup2: unknown option "nsdelegate" [ 2.625965] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.626762] systemd[1]: Detected architecture arm64. [ 2.652668] systemd[1]: Set hostname to . [ 2.758277] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.758288] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.914534] random: systemd: uninitialized urandom read (16 bytes read) [ 2.914566] systemd[1]: Reached target Swap. [ 2.914764] random: systemd: uninitialized urandom read (16 bytes read) [ 2.914902] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.914934] random: systemd: uninitialized urandom read (16 bytes read) [ 2.916756] systemd[1]: Created slice User and Session Slice. [ 2.917687] systemd[1]: Created slice System Slice. [ 2.917924] systemd[1]: Listening on RPCbind Server Activation Socket. [ 3.007980] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.211811] tegra-xusb 70090000.xusb: entering ELPG [ 4.212840] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3 [ 4.213026] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 4.213917] tegra-xusb 70090000.xusb: entering ELPG done [ 4.677329] systemd-journald[2021]: Received request to flush runtime journal from PID 1 [ 6.620248] random: crng init done [ 6.624598] random: 7 urandom warning(s) missed due to ratelimiting [ 8.847209] using random self ethernet address [ 8.855087] using random host ethernet address [ 9.778583] Mass Storage Function, version: 2009/09/11 [ 9.778587] LUN: removable file: (no medium) [ 9.785237] using random self ethernet address [ 9.790685] using random host ethernet address [ 9.814174] rndis0: HOST MAC ee:1e:05:a3:91:f4 [ 9.814289] rndis0: MAC ee:1e:05:a3:91:f5 [ 9.815038] usb0: HOST MAC ee:1e:05:a3:91:f6 [ 9.815267] usb0: MAC ee:1e:05:a3:91:f7 [ 9.815301] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 9.820977] l4tbr0: port 1(rndis0) entered blocking state [ 9.820982] l4tbr0: port 1(rndis0) entered disabled state [ 9.821164] device rndis0 entered promiscuous mode [ 9.826835] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 9.832824] l4tbr0: port 2(usb0) entered blocking state [ 9.832830] l4tbr0: port 2(usb0) entered disabled state [ 9.833483] device usb0 entered promiscuous mode [ 9.839342] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 10.121885] android_work: did not send uevent (0 0 (null)) [ 10.189624] android_work: sent uevent USB_STATE=CONNECTED [ 10.256568] android_work: sent uevent USB_STATE=DISCONNECTED [ 10.338640] android_work: sent uevent USB_STATE=CONNECTED [ 10.423544] configfs-gadget gadget: high-speed config #1: c [ 10.423572] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 10.423588] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 10.423604] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 10.423703] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled [ 10.423736] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled [ 10.423752] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled [ 10.423789] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled [ 10.423912] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 10.423981] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled [ 10.423998] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled [ 10.424066] android_work: sent uevent USB_STATE=CONFIGURED [ 10.478555] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 10.478573] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 10.478787] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 10.489606] tegra-xudc-new 700d0000.xudc: ep 13 disabled [ 10.489700] tegra-xudc-new 700d0000.xudc: ep 8 disabled [ 10.520557] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 10.520574] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 10.637711] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.638882] eth0: 0xffffff800ab66000, 00:04:4b:e6:30:29, IRQ 407 [ 10.689990] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.747808] r8168: eth0: link up [ 13.747848] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.832430] device-mapper: table: 253:0: thin-pool: unknown target type [ 15.842528] device-mapper: ioctl: error adding target to table [ 19.237853] device-mapper: table: 253:0: thin-pool: unknown target type [ 19.244464] device-mapper: ioctl: error adding target to table [ 19.432452] l4tbr0: port 2(usb0) entered blocking state [ 19.432458] l4tbr0: port 2(usb0) entered forwarding state [ 19.432532] l4tbr0: port 1(rndis0) entered blocking state [ 19.432537] l4tbr0: port 1(rndis0) entered forwarding state [ 19.432628] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 19.432651] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 19.573029] tegradc tegradc.0: blank - powerdown [ 19.613488] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 19.613490] Extcon AUX1(HDMI) disable [ 19.633887] tegradc tegradc.0: unblank [ 19.638591] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 19.638683] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 19.639715] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 19.674855] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 19.674858] Extcon AUX1(HDMI) enable [ 19.690074] tegradc tegradc.0: sync windows ret = 246 [ 22.467366] device-mapper: table: 253:0: thin-pool: unknown target type [ 22.473976] device-mapper: ioctl: error adding target to table [ 22.553806] tegradc tegradc.0: blank - powerdown [ 22.589909] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 22.589912] Extcon AUX1(HDMI) disable [ 22.610412] tegradc tegradc.0: unblank [ 22.615131] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 22.615204] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 22.616236] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 22.651146] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 22.651148] Extcon AUX1(HDMI) enable [ 22.666430] tegradc tegradc.0: sync windows ret = 246 [ 25.443896] tegradc tegradc.0: blank - powerdown [ 25.483007] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 25.483009] Extcon AUX1(HDMI) disable [ 25.503383] tegradc tegradc.0: unblank [ 25.508138] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 25.508221] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 25.509238] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 25.544271] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 25.544274] Extcon AUX1(HDMI) enable [ 25.559450] tegradc tegradc.0: sync windows ret = 247 [ 25.866014] tegradc tegradc.0: blank - powerdown [ 25.909532] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 25.909535] Extcon AUX1(HDMI) disable [ 25.929902] tegradc tegradc.0: unblank [ 25.934604] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 25.934678] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 25.935686] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 25.970628] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 25.970630] Extcon AUX1(HDMI) enable [ 25.985964] tegradc tegradc.0: sync windows ret = 247 [ 26.291406] tegradc tegradc.0: blank - powerdown [ 26.336038] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 26.336040] Extcon AUX1(HDMI) disable [ 26.356423] tegradc tegradc.0: unblank [ 26.361118] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 26.361195] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 26.362211] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 26.397085] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 26.397088] Extcon AUX1(HDMI) enable [ 26.412408] tegradc tegradc.0: sync windows ret = 246 [ 26.718911] tegradc tegradc.0: blank - powerdown [ 26.762508] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 26.762511] Extcon AUX1(HDMI) disable [ 26.782865] tegradc tegradc.0: unblank [ 26.787549] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 26.787622] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 26.788682] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 26.823629] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 26.823632] Extcon AUX1(HDMI) enable [ 26.838902] tegradc tegradc.0: sync windows ret = 247 [ 27.147604] tegradc tegradc.0: blank - powerdown [ 27.188920] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 27.188922] Extcon AUX1(HDMI) disable [ 27.209384] tegradc tegradc.0: unblank [ 27.214082] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 27.214154] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 27.215175] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 27.250064] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 27.250067] Extcon AUX1(HDMI) enable [ 27.265435] tegradc tegradc.0: sync windows ret = 246 [ 27.574661] tegradc tegradc.0: blank - powerdown [ 27.615414] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 27.615416] Extcon AUX1(HDMI) disable [ 27.635861] tegradc tegradc.0: unblank [ 27.640574] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 27.640653] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 27.641675] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 27.676547] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 27.676549] Extcon AUX1(HDMI) enable [ 27.691914] tegradc tegradc.0: sync windows ret = 246 [ 28.002527] tegradc tegradc.0: blank - powerdown [ 28.042010] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 28.042012] Extcon AUX1(HDMI) disable [ 28.062322] tegradc tegradc.0: unblank [ 28.067037] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 28.067113] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 28.068135] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 28.103052] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 28.103054] Extcon AUX1(HDMI) enable [ 28.118394] tegradc tegradc.0: sync windows ret = 246 [ 28.423825] tegradc tegradc.0: blank - powerdown [ 28.468472] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 28.468474] Extcon AUX1(HDMI) disable [ 28.488807] tegradc tegradc.0: unblank [ 28.493525] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 28.493598] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 28.494613] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 28.529531] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 28.529533] Extcon AUX1(HDMI) enable [ 28.544879] tegradc tegradc.0: sync windows ret = 246 [ 28.857993] tegradc tegradc.0: blank - powerdown [ 28.894921] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 28.894923] Extcon AUX1(HDMI) disable [ 28.915277] tegradc tegradc.0: unblank [ 28.920009] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 28.920082] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 28.921098] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 28.955992] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 28.955995] Extcon AUX1(HDMI) enable [ 28.971356] tegradc tegradc.0: sync windows ret = 247 [ 29.299123] tegradc tegradc.0: blank - powerdown [ 29.338080] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 29.338082] Extcon AUX1(HDMI) disable [ 29.358410] tegradc tegradc.0: unblank [ 29.363079] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 29.363149] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 29.364162] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 29.403485] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 29.403488] Extcon AUX1(HDMI) enable [ 29.414393] tegradc tegradc.0: sync windows ret = 248 [ 29.727412] tegradc tegradc.0: blank - powerdown [ 29.764502] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 29.764504] Extcon AUX1(HDMI) disable [ 29.784842] tegradc tegradc.0: unblank [ 29.789540] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 29.789611] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 29.790630] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 29.825599] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 29.825601] Extcon AUX1(HDMI) enable [ 29.840933] tegradc tegradc.0: sync windows ret = 246 [ 30.148696] tegradc tegradc.0: blank - powerdown [ 30.190959] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 30.190961] Extcon AUX1(HDMI) disable [ 30.211316] tegradc tegradc.0: unblank [ 30.216034] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 30.216106] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 30.217122] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 30.251998] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 30.252000] Extcon AUX1(HDMI) enable [ 30.267385] tegradc tegradc.0: sync windows ret = 247 [ 30.577334] tegradc tegradc.0: blank - powerdown [ 30.617458] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 30.617460] Extcon AUX1(HDMI) disable [ 30.637803] tegradc tegradc.0: unblank [ 30.642467] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 30.642541] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 30.643568] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 30.678596] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 30.678598] Extcon AUX1(HDMI) enable [ 30.693827] tegradc tegradc.0: sync windows ret = 246 [ 31.003486] tegradc tegradc.0: blank - powerdown [ 31.043884] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 31.043886] Extcon AUX1(HDMI) disable [ 31.064228] tegradc tegradc.0: unblank [ 31.068885] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 31.068961] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 31.069983] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 31.104840] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 31.104843] Extcon AUX1(HDMI) enable [ 31.120166] tegradc tegradc.0: sync windows ret = 246 [ 31.473544] tegradc tegradc.0: blank - powerdown [ 31.520264] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 31.520266] Extcon AUX1(HDMI) disable [ 31.540703] tegradc tegradc.0: unblank [ 31.545487] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 31.545563] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 31.546602] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 31.590190] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 31.590193] Extcon AUX1(HDMI) enable [ 31.596834] tegradc tegradc.0: sync windows ret = 248 [ 31.859978] vdd-fan: disabling [ 31.859983] vdd-usb-vbus: disabling [ 31.859985] vdd-usb-vbus2: disabling [ 31.859995] avdd-io-edp-1v05: disabling [ 31.920376] tegradc tegradc.0: blank - powerdown [ 31.963607] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 31.963609] Extcon AUX1(HDMI) disable [ 31.984023] tegradc tegradc.0: unblank [ 31.988704] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 31.988778] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 31.989796] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 32.024762] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 32.024764] Extcon AUX1(HDMI) enable [ 32.040031] tegradc tegradc.0: sync windows ret = 246 [ 32.355651] tegradc tegradc.0: blank - powerdown [ 32.390107] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 32.390109] Extcon AUX1(HDMI) disable [ 32.410525] tegradc tegradc.0: unblank [ 32.415228] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 32.415305] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 32.416330] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 32.451212] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 32.451215] Extcon AUX1(HDMI) enable [ 32.466557] tegradc tegradc.0: sync windows ret = 246 [ 32.775436] tegradc tegradc.0: blank - powerdown [ 32.816672] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 32.816674] Extcon AUX1(HDMI) disable [ 32.836995] tegradc tegradc.0: unblank [ 32.841685] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 32.841759] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 32.842778] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 32.877648] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 32.877650] Extcon AUX1(HDMI) enable [ 32.893047] tegradc tegradc.0: sync windows ret = 246 [ 33.204098] tegradc tegradc.0: blank - powerdown [ 33.243097] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 33.243099] Extcon AUX1(HDMI) disable [ 33.263459] tegradc tegradc.0: unblank [ 33.268201] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 33.268276] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 33.269283] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 33.304213] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 33.304215] Extcon AUX1(HDMI) enable [ 33.319512] tegradc tegradc.0: sync windows ret = 247 [ 33.635622] tegradc tegradc.0: blank - powerdown [ 33.669618] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 33.669620] Extcon AUX1(HDMI) disable [ 33.689937] tegradc tegradc.0: unblank [ 33.694612] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 33.694685] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 33.695688] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 33.730734] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 33.730737] Extcon AUX1(HDMI) enable [ 33.746036] tegradc tegradc.0: sync windows ret = 246 [ 34.060482] tegradc tegradc.0: blank - powerdown [ 34.096086] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 34.096088] Extcon AUX1(HDMI) disable [ 34.116427] tegradc tegradc.0: unblank [ 34.121120] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 34.121195] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 34.122202] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 34.157087] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 34.157089] Extcon AUX1(HDMI) enable [ 34.172471] tegradc tegradc.0: sync windows ret = 246 [ 34.486503] tegradc tegradc.0: blank - powerdown [ 34.522541] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 34.522543] Extcon AUX1(HDMI) disable [ 34.542895] tegradc tegradc.0: unblank [ 34.547556] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 34.547631] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 34.548674] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 34.583533] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 34.583536] Extcon AUX1(HDMI) enable [ 34.598945] tegradc tegradc.0: sync windows ret = 247 [ 34.914546] tegradc tegradc.0: blank - powerdown [ 34.948909] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 34.948911] Extcon AUX1(HDMI) disable [ 34.969370] tegradc tegradc.0: unblank [ 34.974065] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 34.974141] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 34.975153] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 35.010019] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 35.010022] Extcon AUX1(HDMI) enable [ 35.025381] tegradc tegradc.0: sync windows ret = 247 [ 35.335355] tegradc tegradc.0: blank - powerdown [ 35.375492] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 35.375494] Extcon AUX1(HDMI) disable [ 35.395857] tegradc tegradc.0: unblank [ 35.400522] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 35.400596] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 35.401614] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 35.436460] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 35.436463] Extcon AUX1(HDMI) enable [ 35.451916] tegradc tegradc.0: sync windows ret = 246 [ 35.760924] tegradc tegradc.0: blank - powerdown [ 35.801956] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 35.801958] Extcon AUX1(HDMI) disable [ 35.822298] tegradc tegradc.0: unblank [ 35.826984] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 35.827056] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 35.828082] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 35.862989] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 35.862991] Extcon AUX1(HDMI) enable [ 35.878387] tegradc tegradc.0: sync windows ret = 246 [ 36.189889] tegradc tegradc.0: blank - powerdown [ 36.228380] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 36.228382] Extcon AUX1(HDMI) disable [ 36.248787] tegradc tegradc.0: unblank [ 36.253448] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 36.253524] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 36.254559] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 36.289449] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 36.289451] Extcon AUX1(HDMI) enable [ 36.304789] tegradc tegradc.0: sync windows ret = 246 [ 36.628271] tegradc tegradc.0: blank - powerdown [ 36.671563] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 36.671565] Extcon AUX1(HDMI) disable [ 36.692004] tegradc tegradc.0: unblank [ 36.696664] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 36.696736] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 36.697742] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 36.732590] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 36.732593] Extcon AUX1(HDMI) enable [ 36.747950] tegradc tegradc.0: sync windows ret = 246 [ 37.063502] tegradc tegradc.0: blank - powerdown [ 37.098039] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 37.098042] Extcon AUX1(HDMI) disable [ 37.118425] tegradc tegradc.0: unblank [ 37.123101] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 37.123178] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 37.124204] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 37.159032] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 37.159034] Extcon AUX1(HDMI) enable [ 37.174496] tegradc tegradc.0: sync windows ret = 246 [ 37.487083] tegradc tegradc.0: blank - powerdown [ 37.524518] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 37.524520] Extcon AUX1(HDMI) disable [ 37.544932] tegradc tegradc.0: unblank [ 37.549637] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 37.549713] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 37.550730] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 37.585633] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 37.585635] Extcon AUX1(HDMI) enable [ 37.600956] tegradc tegradc.0: sync windows ret = 246 [ 37.912730] tegradc tegradc.0: blank - powerdown [ 37.951067] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 37.951069] Extcon AUX1(HDMI) disable [ 37.971872] tegradc tegradc.0: unblank [ 37.976580] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 37.976658] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 37.977721] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 38.021342] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 38.021345] Extcon AUX1(HDMI) enable [ 38.027938] tegradc tegradc.0: sync windows ret = 248 [ 38.344855] tegradc tegradc.0: blank - powerdown [ 38.394657] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 38.394659] Extcon AUX1(HDMI) disable [ 38.415095] tegradc tegradc.0: unblank [ 38.419801] tegradc tegradc.0: nominal-pclk:65000000 parent:65000000 div:1.0 pclk:65000000 64350000~70850000 [ 38.419876] tegradc tegradc.0: hdmi: tmds rate:65000K prod-setting:prod_c_hdmi_54m_75m [ 38.420894] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 38.459815] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 38.459817] Extcon AUX1(HDMI) enable [ 38.471080] tegradc tegradc.0: sync windows ret = 248