[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5434-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Sat Feb 19 08:59:22 PST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb4000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 nv-auto-config quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 nv-auto-config [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29664(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3560284K/4159488K available (15358K kernel code, 2956K rwdata, 6696K rodata, 8640K init, 612K bss, 124068K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001730] Console: colour dummy device 80x25 [ 0.001741] console [tty0] enabled [ 0.001748] bootconsole [uart8250] disabled [ 0.001768] kmemleak: Kernel memory leak detector disabled [ 0.001787] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001800] pid_max: default: 32768 minimum: 301 [ 0.002247] Security Framework initialized [ 0.002470] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002478] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003641] ftrace: allocating 47098 entries in 184 pages [ 0.172978] sched-energy: CPU device node has no sched-energy-costs [ 0.173015] ASID allocator initialised with 65536 entries [ 0.212537] tegra-id: chipid=22117. [ 0.212550] tegra-id: opt_subrevision=0. [ 0.212568] Tegra Speedo/IDDQ fuse revision 4 [ 0.212573] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212578] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.212584] Tegra: CPU Speedo Value 2054, SoC Speedo Value 1944, GPU Speedo Value 2043 [ 0.212589] Tegra: CPU IDDQ Value 1696, SoC IDDQ Value 1820, GPU IDDQ Value 2260 [ 0.212609] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212622] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.212629] DTB Build time: Feb 19 2022 09:01:46 [ 0.261144] CPU1: Booted secondary processor [411fd071] [ 0.293031] CPU2: Booted secondary processor [411fd071] [ 0.324998] CPU3: Booted secondary processor [411fd071] [ 0.325088] Brought up 4 CPUs [ 0.325097] SMP: Total of 4 processors activated. [ 0.325105] CPU features: detected feature: 32-bit EL0 Support [ 0.325370] CPU: All CPU(s) started at EL2 [ 0.325387] alternatives: patching kernel code [ 0.333785] devtmpfs: initialized [ 0.372202] Initilizing CustomIPI irq domain [ 0.372527] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372547] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384122] pinctrl core: initialized pinctrl subsystem [ 0.384745] OS set in device tree is not L4T. [ 0.385313] regulator-dummy: no parameters [ 0.385602] Initializing plugin-manager [ 0.385774] Plugin module not found [ 0.385976] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.386497] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.386927] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.387661] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.387869] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.388488] node /plugin-manager/fragement@13 match with board >=3448-0002-300 [ 0.392124] NET: Registered protocol family 16 [ 0.393557] pstore: using zlib compression [ 0.393602] console [pstore-1] enabled [ 0.393607] pstore: Registered ramoops as persistent store backend [ 0.393613] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409159] cpuidle: using governor menu [ 0.413387] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.415121] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.415142] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417755] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.420160] Serial: AMBA PL011 UART driver [ 0.420730] tegra_powergate_init: DONE [ 0.420746] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.420754] DTB Build time: Feb 19 2022 09:01:46 [ 0.422705] Tegra reboot handler registered. [ 0.427324] iommu: Adding device tegra-carveouts to group 0 [ 0.427458] platform tegra-carveouts: domain=ffffffc0f944f3d8 allocates as[0]=ffffffc0f94300a8 [ 0.427804] iommu: Adding device smmu_test to group 1 [ 0.427858] platform smmu_test: domain=ffffffc0f944f618 allocates as[0]=ffffffc0f9430110 [ 0.428716] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.428772] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.428836] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.428845] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428871] mc-err: mcerr ops are set to t21x [ 0.439520] iommu: Adding device 70090000.xusb to group 2 [ 0.439803] iommu: Adding device 70006000.serial to group 3 [ 0.439863] platform 70006000.serial: domain=ffffffc0f9458cd8 allocates as[0]=ffffffc0f9430178 [ 0.440311] iommu: Adding device 70006040.serial to group 4 [ 0.440580] iommu: Adding device 70006200.serial to group 5 [ 0.440766] iommu: Adding device sound to group 6 [ 0.440817] platform sound: domain=ffffffc0f94d2258 allocates as[0]=ffffffc0f94301e0 [ 0.441420] iommu: Adding device 7000d400.spi to group 7 [ 0.441725] iommu: Adding device 7000d600.spi to group 8 [ 0.442062] iommu: Adding device 50000000.host1x to group 9 [ 0.442337] iommu: Adding device 54080000.vi to group 10 [ 0.442741] iommu: Adding device 54600000.isp to group 11 [ 0.443008] iommu: Adding device 54680000.isp to group 12 [ 0.443319] iommu: Adding device tegradc.0 to group 13 [ 0.443374] platform tegradc.0: domain=ffffffc0f9530018 allocates as[0]=ffffffc0f9430248 [ 0.447597] platform tegradc.0: IOVA linear map 0x0000000092cb4000(800000) [ 0.447993] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.448336] iommu: Adding device tegradc.1 to group 14 [ 0.448385] platform tegradc.1: domain=ffffffc0f9530258 allocates as[0]=ffffffc0f94302b0 [ 0.452574] platform tegradc.1: IOVA linear map 0x0000000092cb4000(800000) [ 0.452967] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.453267] iommu: Adding device 54340000.vic to group 15 [ 0.453472] iommu: Adding device 544c0000.nvenc to group 16 [ 0.453683] iommu: Adding device 54500000.tsec to group 17 [ 0.453880] iommu: Adding device 54100000.tsecb to group 18 [ 0.454081] iommu: Adding device 54480000.nvdec to group 19 [ 0.454283] iommu: Adding device 54380000.nvjpg to group 20 [ 0.455350] iommu: Adding device 546c0000.i2c to group 21 [ 0.455683] iommu: Adding device 57000000.gpu to group 22 [ 0.455754] platform 57000000.gpu: domain=ffffffc0f954c258 allocates as[0]=ffffffc0f9430318 [ 0.455798] platform 57000000.gpu: domain=ffffffc0f954c258 allocates as[1]=ffffffc0f9430380 [ 0.455835] platform 57000000.gpu: domain=ffffffc0f954c258 allocates as[2]=ffffffc0f94303e8 [ 0.455874] platform 57000000.gpu: domain=ffffffc0f954c258 allocates as[3]=ffffffc0f9430450 [ 0.456735] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.456744] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.456757] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.456761] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.456765] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.509348] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.509358] tegra-pmc: Clear bootloader IO dpd settings [ 0.509383] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.509450] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.509756] iommu: Adding device 70012000.se to group 23 [ 0.510344] iommu: Adding device 1003000.pcie to group 24 [ 0.510397] platform 1003000.pcie: domain=ffffffc0f954c9d8 allocates as[0]=ffffffc0f94304b8 [ 0.510916] iommu: Adding device 7000c000.i2c to group 25 [ 0.511235] iommu: Adding device 7000c400.i2c to group 26 [ 0.511576] iommu: Adding device 7000c500.i2c to group 27 [ 0.511897] iommu: Adding device 7000c700.i2c to group 28 [ 0.512214] iommu: Adding device 7000d000.i2c to group 29 [ 0.512530] iommu: Adding device 7000d100.i2c to group 30 [ 0.512846] iommu: Adding device sdhci-tegra.3 to group 31 [ 0.512901] platform sdhci-tegra.3: domain=ffffffc0f9559558 allocates as[0]=ffffffc0f9430520 [ 0.514017] iommu: Adding device 700d0000.xudc to group 32 [ 0.518359] vdd-ac-bat: 5000 mV [ 0.518836] vdd-5v0-sys: 5000 mV [ 0.519746] vdd-5v0-hdmi: 5000 mV [ 0.520252] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.520524] vdd-1v8-sys: 1800 mV [ 0.521005] vdd-fan: 5000 mV [ 0.521311] vdd-fan: supplied by vdd-5v0-sys [ 0.521625] vdd-usb-vbus: 5000 mV [ 0.521941] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.522414] vdd-usb-vbus2: 5000 mV [ 0.550157] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.552427] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.554230] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.554262] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.554283] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.554711] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.563130] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.563504] SCSI subsystem initialized [ 0.563709] libata version 3.00 loaded. [ 0.563993] usbcore: registered new interface driver usbfs [ 0.564050] usbcore: registered new interface driver hub [ 0.564091] usbcore: registered new device driver usb [ 0.568180] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.573364] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.573515] random: fast init done [ 0.574431] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.577171] vdd-ddr-1v1: 1150 mV [ 0.581159] vdd-pre-reg-1v35: 1350 mV [ 0.585153] vdd-1v8: 1800 mV [ 0.588358] avdd-sys-1v2: 1200 mV [ 0.592235] vdd-pex-1v0: 1050 mV [ 0.592877] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.593429] max77620-ldo3: at 3100 mV [ 0.596290] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.596920] max77620-ldo5: at 3100 mV [ 0.600242] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.604237] avdd-1v05-pll: 1050 mV [ 0.608254] avdd-io-hdmi-dp: 1050 mV [ 0.610948] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.611251] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.611545] max77620 4-003c: max77620 probe successful [ 0.614388] media: Linux media interface: v0.10 [ 0.614451] Linux video capture interface: v2.00 [ 0.615429] pps_core: LinuxPPS API ver. 1 registered [ 0.615436] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.615462] PTP clock support registered [ 0.618675] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.619553] Advanced Linux Sound Architecture Driver Initialized. [ 0.620207] Bluetooth: Core ver 2.22 [ 0.620259] NET: Registered protocol family 31 [ 0.620263] Bluetooth: HCI device and connection manager initialized [ 0.620279] Bluetooth: HCI socket layer initialized [ 0.620287] Bluetooth: L2CAP socket layer initialized [ 0.620313] Bluetooth: SCO socket layer initialized [ 0.622244] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.622260] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.622305] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.622319] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.625684] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.626827] vdd-3v3-sys: 3300 mV [ 0.627172] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.627251] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.629269] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.629701] vdd-3v3-sd: 3300 mV [ 0.630112] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.630926] avdd-io-edp-1v05: 1050 mV [ 0.631370] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.631545] vdd-usb-hub-en: 5000 mV [ 0.631919] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.633160] camchar: rtcpu character device driver loaded [ 0.633901] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.635345] clocksource: Switched to clocksource arch_sys_counter [ 0.676403] VFS: Disk quotas dquot_6.6.0 [ 0.676532] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.677053] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.677560] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.677578] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.677786] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.677793] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.677806] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.677839] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.677846] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.677860] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.677869] nvmap_page_pool_init: Total RAM pages: 1008855 [ 0.677874] nvmap_page_pool_init: nvmap page pool size: 126106 pages (492 MB) [ 0.677969] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.678484] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.679512] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.688178] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.688627] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.688986] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.689258] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.689431] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.689698] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.689702] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.690140] NET: Registered protocol family 2 [ 0.690275] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.692692] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.692904] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.693453] TCP: Hash tables configured (established 32768 bind 32768) [ 0.693613] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.693695] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.694126] NET: Registered protocol family 1 [ 0.694878] RPC: Registered named UNIX socket transport module. [ 0.694883] RPC: Registered udp transport module. [ 0.694887] RPC: Registered tcp transport module. [ 0.694892] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.694905] PCI: CLS 0 bytes, default 64 [ 0.695147] Trying to unpack rootfs image as initramfs... [ 0.995662] Freeing initrd memory: 6988K [ 1.005701] host1x 50000000.host1x: initialized [ 1.007707] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.011067] audit: initializing netlink subsys (disabled) [ 1.011159] audit: type=2000 audit(0.855:1): initialized [ 1.011948] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.021779] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.023248] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.024088] 9p: Installing v9fs 9p2000 file system support [ 1.027733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.027861] io scheduler noop registered [ 1.028157] io scheduler cfq registered (default) [ 1.030901] gic 702f9000.agic: GIC IRQ controller registered [ 1.033927] iommu: Adding device 702ef000.adsp to group 33 [ 1.042763] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.042914] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.043753] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x81e840f [ 1.043763] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.045458] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.045559] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.045656] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.045853] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.045945] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.046039] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.046125] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.046219] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.046309] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.046394] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.052668] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.054366] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.056350] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.057651] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.058009] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.059318] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.059500] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.059862] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.060138] Adding domain tsec-pd to PM domain host1x-pd [ 1.063466] tsec 54500000.tsec: initialized [ 1.064878] tsec 54100000.tsecb: initialized [ 1.065617] Adding domain nvdec-pd to PM domain host1x-pd [ 1.069195] nvdec 54480000.nvdec: initialized [ 1.070272] Adding domain vic03-pd to PM domain host1x-pd [ 1.070456] Adding domain msenc-pd to PM domain host1x-pd [ 1.070619] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.074638] falcon 54340000.vic: initialized [ 1.075982] falcon 544c0000.nvenc: initialized [ 1.077352] falcon 54380000.nvjpg: initialized [ 1.081998] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 1.082042] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.082079] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.082130] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.082231] display board info: id 0x0, fab 0x0 [ 1.082287] generic_infoframe_type: 0x87 [ 1.082360] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.082366] tegra_cec 70015000.tegra_cec: probed [ 1.082446] tegradc tegradc.0: DT parsed successfully [ 1.082494] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.083052] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.091013] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.091022] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.091027] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.091033] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.091039] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.091062] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.091138] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.091363] iommu: Adding device 0000:00:01.0 to group 35 [ 1.091439] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.091509] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.091694] iommu: Adding device 0000:00:02.0 to group 36 [ 1.091759] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.091768] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.091914] pci 0000:01:00.0: [1dee:5216] type 00 class 0x010802 [ 1.091943] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 1.091985] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.092014] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.092262] iommu: Adding device 0000:01:00.0 to group 37 [ 1.095558] tegradc tegradc.0: probed [ 1.096442] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.096951] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.096957] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.097200] kfuse 7000fc00.kfuse: initialized [ 1.097814] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.098498] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.099119] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.099126] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.099461] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.100824] vdd-gpu: applied init 1000000uV constraint [ 1.100831] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.101173] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.103407] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.103550] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.103573] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.103601] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 1.103620] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.103755] pci 0000:02:00.0: supports D1 D2 [ 1.103760] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.103953] iommu: Adding device 0000:02:00.0 to group 38 [ 1.104753] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.104821] No Device Node present for smmu client: serial8250 !! [ 1.104828] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.104851] iommu: Adding device serial8250 to group 39 [ 1.106387] console [ttyS0] disabled [ 1.106426] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.106458] console [ttyS0] enabled [ 1.107190] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.107455] serial-tegra 70006200.serial: RX in PIO mode [ 1.107542] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.107884] Console: switching to colour frame buffer device 240x67 [ 1.107997] tegradc tegradc.0: fb registered [ 1.108555] [drm] Initialized [ 1.114782] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.114810] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.115192] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.115201] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.115408] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.115455] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.115465] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 1.115471] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.115481] pci 0000:01:00.0: BAR 6: assigned [mem 0x13000000-0x1301ffff pref] [ 1.115489] pci 0000:01:00.0: BAR 0: assigned [mem 0x13020000-0x13023fff 64bit] [ 1.115505] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.115512] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.115524] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 1.115542] pci 0000:02:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 1.115558] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.115567] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.115572] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 1.115580] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 1.115898] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.115904] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.115910] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.116031] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.116242] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.116246] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.116252] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.116361] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.116875] brd: module loaded [ 1.121155] loop: module loaded [ 1.121210] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.121305] tegra_profiler: auth: init [ 1.121901] THERMAL EST: found 2 subdevs [ 1.121906] THERMAL EST num_resources: 0 [ 1.121911] [THERMAL EST subdev 0] [ 1.121916] [THERMAL EST subdev 1] [ 1.122237] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.122240] THERMAL EST: thz register success. [ 1.122339] THERMAL EST: end of probe, return err: 0 [ 1.123057] sd: No Scsi addr parsed to reserve index [ 1.123085] hisi_sas: driver version v1.6 [ 1.123764] nvme nvme0: pci function 0000:01:00.0 [ 1.123806] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 1.128081] libphy: Fixed MDIO Bus: probed [ 1.128722] tun: Universal TUN/TAP device driver, 1.6 [ 1.128726] tun: (C) 1999-2004 Max Krasnyansky [ 1.129411] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.129414] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.129461] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.129464] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.129508] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.129511] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.129554] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.129557] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.130215] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 1.130233] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.141426] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.141430] Extcon AUX1(HDMI) enable [ 1.142015] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.142071] tegradc tegradc.1: No lt-data, using default setting [ 1.142090] tegradc tegradc.1: No hpd-gpio in DT [ 1.142115] tegradc tegradc.1: DT parsed successfully [ 1.142146] tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1 [ 1.143045] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.151273] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.151325] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:3d:e0:18 from device tree [ 1.151982] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.152014] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.152492] PPP generic driver version 2.4.2 [ 1.152639] PPP BSD Compression module registered [ 1.152643] PPP Deflate Compression module registered [ 1.152660] PPP MPPE Compression module registered [ 1.152665] NET: Registered protocol family 24 [ 1.152719] usbcore: registered new interface driver r8152 [ 1.152758] usbcore: registered new interface driver asix [ 1.152802] usbcore: registered new interface driver ax88179_178a [ 1.152838] usbcore: registered new interface driver cdc_ether [ 1.152872] usbcore: registered new interface driver net1080 [ 1.152908] usbcore: registered new interface driver cdc_subset [ 1.152947] usbcore: registered new interface driver zaurus [ 1.152992] usbcore: registered new interface driver cdc_ncm [ 1.153130] VFIO - User Level meta-driver version: 0.3 [ 1.154104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.154116] ehci-pci: EHCI PCI platform driver [ 1.154150] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.154167] ohci-pci: OHCI PCI platform driver [ 1.154203] ohci-platform: OHCI generic platform driver [ 1.156132] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.156302] tegradc tegradc.1: probed [ 1.156697] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.157745] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f911c000 id [ 1.159262] usbcore: registered new interface driver uas [ 1.159310] usbcore: registered new interface driver usb-storage [ 1.159366] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.159399] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.159410] usbcore: registered new interface driver usbserial [ 1.159417] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.160146] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.160180] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.160333] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.160340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.160344] usb usb1: Product: xHCI Host Controller [ 1.160349] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.160353] usb usb1: SerialNumber: 70090000.xusb [ 1.161901] tegradc tegradc.1: fb registered [ 1.162109] hub 1-0:1.0: USB hub found [ 1.162143] hub 1-0:1.0: 5 ports detected [ 1.162664] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.162674] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.162773] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.162867] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.162873] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.162877] usb usb2: Product: xHCI Host Controller [ 1.162882] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.162886] usb usb2: SerialNumber: 70090000.xusb [ 1.163296] hub 2-0:1.0: USB hub found [ 1.163345] hub 2-0:1.0: 4 ports detected [ 1.163988] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.164057] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.164063] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.165058] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.165063] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.165071] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.165080] tegradc tegradc.1: blank - powerdown [ 1.165091] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.165094] Extcon DP: HPD disabled [ 1.165097] hpd: hpd_switch 0 [ 1.165101] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.165109] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.165115] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.165118] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.165125] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.165500] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.165761] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.165920] mousedev: PS/2 mouse device common for all mice [ 1.165980] usbcore: registered new interface driver xpad [ 1.175420] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.263408] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.263468] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.267567] usb usb2: usb_suspend_both: status 0 [ 1.274862] tegradc tegradc.0: blank - powerdown [ 1.292183] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.294345] rtc rtc1: alarm rtc device [ 1.294357] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.294373] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.294744] i2c /dev entries driver [ 1.296675] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.297116] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.297121] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.297820] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.312225] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.312227] Extcon AUX1(HDMI) disable [ 1.321089] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.321154] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.321222] imx219 7-0010: board setup failed [ 1.321270] imx219: probe of 7-0010 failed with error -121 [ 1.321755] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.345008] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.345072] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.345134] imx219 8-0010: board setup failed [ 1.345182] imx219: probe of 8-0010 failed with error -121 [ 1.346126] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.346500] tegradc tegradc.0: unblank [ 1.348100] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.348105] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.348400] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.348413] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.348420] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.348549] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.348559] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.348564] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.348725] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.348733] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.348737] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.348916] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.349510] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.349557] tegra_aotag tegra-aotag: Invalid temp readout [ 1.349576] tegra_aotag tegra-aotag: Invalid temp readout [ 1.349592] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.349600] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.350515] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.350529] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.350681] tegra_aotag tegra-aotag: Invalid temp readout [ 1.350704] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.351130] parse_throttle_dt_data: Num cap clks = 6 [ 1.351134] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.351141] parse_throttle_dt_data: clk=gpu type=4 [ 1.351165] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.351189] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.351217] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.351220] parse_throttle_dt_data: clk=emc type=3 [ 1.351533] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.351624] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.351735] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.352416] FAN dev name: pwm-fan [ 1.352456] FAN:gpio request success. [ 1.352507] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.352744] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.352856] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.352862] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.352932] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.352937] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.352941] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.352945] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.352949] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.352953] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.352957] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.352961] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.352965] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.352969] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.355415] device-mapper: uevent: version 1.0.3 [ 1.355815] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.358446] tegra210-cpufreq cpufreq: probe()...completed [ 1.359283] sdhci: Secure Digital Host Controller Interface driver [ 1.359284] sdhci: Copyright(c) Pierre Ossman [ 1.359285] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.359726] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.360554] tegradc tegradc.0: nominal-pclk:106500000 parent:106500000 div:1.0 pclk:106500000 105435000~116085000 [ 1.360605] tegradc tegradc.0: hdmi: tmds rate:106500K prod-setting:prod_c_hdmi_75m_150m [ 1.361594] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.366597] tegra-se 70012000.se: tegra_se_probe: complete [ 1.367123] hidraw: raw HID events driver (C) Jiri Kosina [ 1.368357] usbcore: registered new interface driver usbhid [ 1.368358] usbhid: USB HID core driver [ 1.370532] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.370694] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.372731] nvpmodel: initialized successfully [ 1.373829] usbcore: registered new interface driver snd-usb-audio [ 1.373890] No Device Node present for smmu client: snd-soc-dummy !! [ 1.373895] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.373913] iommu: Adding device snd-soc-dummy to group 40 [ 1.381251] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.396281] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.396283] Extcon AUX1(HDMI) enable [ 1.398880] OPE platform probe [ 1.398964] OPE platform probe successful [ 1.399253] OPE platform probe [ 1.399501] OPE platform probe successful [ 1.403432] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.411973] tegradc tegradc.0: sync windows ret = 246 [ 1.422528] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.422647] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.422763] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.422879] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.422991] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.423112] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.423225] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.423355] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.423475] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.423589] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.441525] u32 classifier [ 1.441527] Actions configured [ 1.441596] Initializing XFRM netlink socket [ 1.442304] NET: Registered protocol family 10 [ 1.442971] NET: Registered protocol family 17 [ 1.442981] NET: Registered protocol family 15 [ 1.443051] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.443096] Bluetooth: RFCOMM socket layer initialized [ 1.443105] Bluetooth: RFCOMM ver 1.11 [ 1.443110] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.443115] Bluetooth: HIDP socket layer initialized [ 1.443134] 9pnet: Installing 9P2000 support [ 1.443167] Key type dns_resolver registered [ 1.445625] Registered cp15_barrier emulation handler [ 1.445682] Registered setend emulation handler [ 1.448228] registered taskstats version 1 [ 1.448866] Adding domain ve2-pd to PM domain host1x-pd [ 1.449100] Adding domain ve-pd to PM domain host1x-pd [ 1.451099] isp 54600000.isp: initialized [ 1.452197] isp 54680000.isp: initialized [ 1.457785] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.457788] Extcon HDMI: HPD enabled [ 1.457811] tegradc tegradc.0: hdmi: plugged [ 1.462663] last reset is due to power on reset [ 1.462667] KERNEL: PMC reset status reg: 0x0 [ 1.462730] BL: PMC reset status reg: 0x0 [ 1.462733] BL: PMIC poweroff Event Recorder: 0x40 [ 1.464237] clk_cbus_recalc_rate: no gbus parent [ 1.464243] clk_cbus_round_rate: no gbus parent [ 1.464245] clk_cbus_round_rate: no gbus parent [ 1.464253] clk_cbus_recalc_rate: no gbus parent [ 1.464354] clk_cbus_recalc_rate: no gbus parent [ 1.464357] clk_cbus_round_rate: no gbus parent [ 1.464359] clk_cbus_round_rate: no gbus parent [ 1.464363] clk_cbus_recalc_rate: no gbus parent [ 1.465059] tegra_dvfs: GPU-cap: registered [ 1.465115] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.465118] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 1.465120] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 1.466405] tegra_dvfs: vdd-gpu-vts: registered [ 1.467085] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.467857] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.468395] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.471172] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.471499] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.471608] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.471711] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.475892] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.478434] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.487349] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.500104] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:10 UTC (946688410) [ 1.501101] vi 54080000.vi: vi_probe: ++ [ 1.504112] vi 54080000.vi: initialized [ 1.506117] vi 54080000.vi: subdev nvcsi--2 bound [ 1.506221] vi 54080000.vi: subdev nvcsi--1 bound [ 1.506458] mmcblk mmc0:0001: Card claimed for testing. [ 1.507738] Disable partitions left on by BL [ 1.507741] disb [ 1.507797] bwmgr: missing cdev-type property [ 1.507894] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.507900] DRAM derating cdev registered. [ 1.508634] usb 1-2: New USB device found, idVendor=1d5c, idProduct=5011 [ 1.508639] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.508642] usb 1-2: Product: USB2.0 Hub [ 1.508645] usb 1-2: Manufacturer: Fresco Logic, Inc. [ 1.508789] ALSA device list: [ 1.508792] #0: tegra-hda at 0x70038000 irq 82 [ 1.508794] #1: tegra-snd-t210ref-mobile-rt565x [ 1.509425] hub 1-2:1.0: USB hub found [ 1.509494] hub 1-2:1.0: 4 ports detected [ 1.512162] Freeing unused kernel memory: 8640K [ 1.536343] Root device found: mmcblk0p1 [ 1.537752] Found dev node: /dev/mmcblk0p1 [ 1.557141] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.558979] Rootfs mounted over mmcblk0p1 [ 1.576792] Switching from initrd to actual rootfs [ 1.627665] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.647906] usb 2-1: New USB device found, idVendor=1d5c, idProduct=5001 [ 1.647912] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.647915] usb 2-1: Product: USB3.0 Hub [ 1.647919] usb 2-1: Manufacturer: Fresco Logic, Inc. [ 1.648777] hub 2-1:1.0: USB hub found [ 1.648843] hub 2-1:1.0: 4 ports detected [ 1.663366] systemd[1]: System time before build time, advancing clock. [ 1.680151] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.691773] cgroup: cgroup2: unknown option "nsdelegate" [ 1.705560] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.706363] systemd[1]: Detected architecture arm64. [ 1.731854] systemd[1]: Set hostname to . [ 1.767428] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 1.796343] usb 1-3: New USB device found, idVendor=0cf3, idProduct=9271 [ 1.796349] usb 1-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 1.796353] usb 1-3: Product: UB93 [ 1.796356] usb 1-3: Manufacturer: ATHEROS [ 1.796359] usb 1-3: SerialNumber: 12345 [ 1.811069] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.811079] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.916604] random: systemd: uninitialized urandom read (16 bytes read) [ 1.918443] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.918554] random: systemd: uninitialized urandom read (16 bytes read) [ 1.918573] systemd[1]: Reached target Swap. [ 1.918620] random: systemd: uninitialized urandom read (16 bytes read) [ 1.920432] systemd[1]: Created slice System Slice. [ 1.920620] systemd[1]: Listening on udev Kernel Socket. [ 1.920805] systemd[1]: Listening on udev Control Socket. [ 1.946492] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.049387] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.063374] usb 1-2.4: new full-speed USB device number 4 using tegra-xusb [ 2.089558] usb 1-2.4: New USB device found, idVendor=248a, idProduct=8367 [ 2.089565] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.089568] usb 1-2.4: Product: Wireless Receiver [ 2.089572] usb 1-2.4: Manufacturer: Telink [ 2.095523] input: Telink Wireless Receiver as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.0/0003:248A:8367.0001/input/input2 [ 2.103500] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.155794] hid-generic 0003:248A:8367.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-70090000.xusb-2.4/input0 [ 2.158713] input: Telink Wireless Receiver as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.1/0003:248A:8367.0002/input/input3 [ 2.159389] usb 2-1: usb_suspend_both: status 0 [ 2.159607] usb usb2: usb_suspend_both: status 0 [ 2.168035] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.174935] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.216082] hid-generic 0003:248A:8367.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-70090000.xusb-2.4/input1 [ 2.270714] systemd-journald[2030]: Received request to flush runtime journal from PID 1 [ 2.706203] nvme0n1: p1 [ 2.873452] using random self ethernet address [ 2.878274] using random host ethernet address [ 3.233224] random: crng init done [ 3.236655] random: 7 urandom warning(s) missed due to ratelimiting [ 3.548595] Mass Storage Function, version: 2009/09/11 [ 3.548601] LUN: removable file: (no medium) [ 3.554233] using random self ethernet address [ 3.559777] using random host ethernet address [ 3.605586] rndis0: HOST MAC 52:4f:db:7e:df:18 [ 3.605876] rndis0: MAC 52:4f:db:7e:df:19 [ 3.606745] usb0: HOST MAC 52:4f:db:7e:df:1a [ 3.606836] usb0: MAC 52:4f:db:7e:df:1b [ 3.606858] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 3.610385] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 3.610407] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.610440] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.610705] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.610729] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 3.611255] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 3.611266] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.611628] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.623271] l4tbr0: port 1(rndis0) entered blocking state [ 3.623276] l4tbr0: port 1(rndis0) entered disabled state [ 3.623707] device rndis0 entered promiscuous mode [ 3.629738] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.635421] l4tbr0: port 2(usb0) entered blocking state [ 3.635425] l4tbr0: port 2(usb0) entered disabled state [ 3.636680] device usb0 entered promiscuous mode [ 3.648285] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.089653] zram: Added device: zram0 [ 4.092274] zram: Added device: zram1 [ 4.096422] zram: Added device: zram2 [ 4.098417] zram: Added device: zram3 [ 4.134415] zram0: detected capacity change from 0 to 518537216 [ 4.199412] Adding 506380k swap on /dev/zram0. Priority:5 extents:1 across:506380k SS [ 4.230008] zram1: detected capacity change from 0 to 518537216 [ 4.240720] Adding 506380k swap on /dev/zram1. Priority:5 extents:1 across:506380k SS [ 4.250052] zram2: detected capacity change from 0 to 518537216 [ 4.281763] Adding 506380k swap on /dev/zram2. Priority:5 extents:1 across:506380k SS [ 4.294673] zram3: detected capacity change from 0 to 518537216 [ 4.306319] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.306343] cpu-throttle-alert cooling device registered. [ 4.306530] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.306546] gpu-throttle-alert cooling device registered. [ 4.306860] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.306874] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.306888] hot-surface-alert cooling device registered. [ 4.321433] Adding 506380k swap on /dev/zram3. Priority:5 extents:1 across:506380k SS [ 4.407049] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.415862] eth0: 0xffffff800a40c000, 48:b0:2d:3d:e0:18, IRQ 406 [ 4.535237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.625122] usb 1-3: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 4.625500] usbcore: registered new interface driver ath9k_htc [ 4.910956] usb 1-3: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 5.015434] Bridge firewalling registered [ 5.050696] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.162631] ath9k_htc 1-3:1.0: ath9k_htc: HTC initialized with 33 credits [ 5.422756] tegradc tegradc.0: unblank [ 5.423037] tegradc tegradc.1: blank - powerdown [ 5.426646] ath9k_htc 1-3:1.0: ath9k_htc: FW Version: 1.4 [ 5.426652] ath9k_htc 1-3:1.0: FW RMW support: On [ 5.426655] ath: EEPROM regdomain: 0x60 [ 5.426657] ath: EEPROM indicates we should expect a direct regpair map [ 5.426661] ath: Country alpha2 being used: 00 [ 5.426663] ath: Regpair used: 0x60 [ 5.432005] ieee80211 phy0: Atheros AR9271 Rev:1 [ 5.563954] Netfilter messages via NETLINK v0.30. [ 5.566871] ctnetlink v0.93: registering with nfnetlink. [ 5.848412] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 6.190024] fuse init (API version 7.26) [ 6.866739] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.068975] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.143071] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.624111] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.624144] Bluetooth: BNEP socket layer initialized [ 18.873050] tegradc tegradc.0: blank - powerdown [ 18.930353] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 18.930377] Extcon AUX1(HDMI) disable [ 18.948753] tegradc tegradc.1: blank - powerdown [ 19.091313] tegradc tegradc.0: blank - powerdown [ 19.091370] tegradc tegradc.0: unblank [ 19.095730] tegradc tegradc.0: nominal-pclk:106500000 parent:106500000 div:1.0 pclk:106500000 105435000~116085000 [ 19.095819] tegradc tegradc.0: hdmi: tmds rate:106500K prod-setting:prod_c_hdmi_75m_150m [ 19.096826] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 19.133623] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 19.133626] Extcon AUX1(HDMI) enable [ 19.137196] tegradc tegradc.0: unblank [ 19.137486] tegradc tegradc.1: blank - powerdown [ 22.806019] tegradc tegradc.0: unblank [ 22.806031] tegradc tegradc.1: blank - powerdown [ 31.865851] vdd-fan: disabling [ 31.865894] vdd-usb-vbus: disabling [ 31.865925] vdd-usb-vbus2: disabling [ 31.866003] vddio-sdmmc-ap: disabling [ 31.866617] vddio-sdmmc3-ap: disabling [ 31.867160] vdd-3v3-sd: disabling [ 31.867199] avdd-io-edp-1v05: disabling [ 31.867229] vdd-usb-hub-en: disabling