Try to flash agx device Flashing starts in 3s ... ############################################################################### # L4T BSP Information: # R34 , REVISION: 1.0 ############################################################################### # Target Board Information: # Name: jetson-agx-xavier-devkit, Board Family: t186ref, SoC: Tegra 194, # OpMode: production, Boot Authentication: NS, # Disk encryption: disabled , ############################################################################### copying soft_fuses(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-soft-fuses-l4t.cfg)... done. ./tegraflash.py --chip 0x19 --applet "/home/willian/orin/Linux_for_Tegra/bootloader/mb1_t194_prod.bin" --skipuid --soft_fuses tegra194-mb1-soft-fuses-l4t.cfg --bins "mb2_applet nvtboot_applet_t194.bin" --cmd "dump eeprom boardinfo cvm.bin;reboot recovery" Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0107 ] Generating RCM messages [ 0.0144 ] tegrahost_v2 --chip 0x19 0 --magicid MB1B --appendsigheader /home/willian/orin/Linux_for_Tegra/bootloader/mb1_t194_prod.bin zerosbk [ 0.0156 ] Header already present for /home/willian/orin/Linux_for_Tegra/bootloader/mb1_t194_prod.bin [ 0.0200 ] [ 0.0236 ] tegrasign_v3.py --key None --getmode mode.txt [ 0.0242 ] Assuming zero filled SBK key [ 0.0272 ] tegrabct_v2 --chip 0x19 0 --sfuse tegra194-mb1-soft-fuses-l4t.cfg.pdf sfuse.bin [ 0.0286 ] [ 0.0311 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x19 0 --sfuses sfuse.bin --download rcm /home/willian/orin/Linux_for_Tegra/bootloader/mb1_t194_prod_sigheader.bin 0 0 [ 0.0322 ] RCM 0 is saved as rcm_0.rcm [ 0.0378 ] RCM 1 is saved as rcm_1.rcm [ 0.0379 ] RCM 2 is saved as rcm_2.rcm [ 0.0380 ] List of rcm files are saved in rcm_list.xml [ 0.0380 ] [ 0.0380 ] Signing RCM messages [ 0.0422 ] tegrasign_v3.py --key None --list rcm_list.xml --getmontgomeryvalues montgomery.bin --pubkeyhash pub_key.key [ 0.0425 ] Assuming zero filled SBK key [ 0.0491 ] Warning: pub_key.key is not found [ 0.0483 ] Copying signature to RCM mesages [ 0.0506 ] tegrarcm_v2 --chip 0x19 0 --updatesig rcm_list_signed.xml [ 0.0525 ] [ 0.0526 ] Boot Rom communication [ 0.0551 ] tegrarcm_v2 --chip 0x19 0 --rcm rcm_list_signed.xml --skipuid [ 0.0565 ] RCM version 0X190001 [ 0.0847 ] Boot Rom communication completed [ 1.1002 ] [ 2.1063 ] tegrarcm_v2 --isapplet [ 2.1093 ] Applet version 01.00.0000 [ 2.1824 ] [ 2.1868 ] tegrarcm_v2 --ismb2 [ 2.2786 ] [ 2.2890 ] tegrahost_v2 --chip 0x19 --align nvtboot_applet_t194_aligned.bin [ 2.2908 ] [ 2.2936 ] tegrahost_v2 --chip 0x19 0 --magicid PLDT --appendsigheader nvtboot_applet_t194_aligned.bin zerosbk [ 2.2947 ] adding BCH for nvtboot_applet_t194_aligned.bin [ 2.2986 ] [ 2.3025 ] tegrasign_v3.py --key None --list nvtboot_applet_t194_aligned_sigheader.bin_list.xml [ 2.3028 ] Assuming zero filled SBK key [ 2.3079 ] tegrahost_v2 --chip 0x19 0 --updatesigheader nvtboot_applet_t194_aligned_sigheader.bin.encrypt nvtboot_applet_t194_aligned_sigheader.bin.hash zerosbk [ 2.3121 ] [ 2.3151 ] tegrarcm_v2 --download mb2 nvtboot_applet_t194_sigheader.bin.encrypt [ 2.3163 ] Applet version 01.00.0000 [ 2.3900 ] Sending mb2 [ 2.3904 ] [................................................] 100% [ 2.4049 ] [ 2.4092 ] tegrarcm_v2 --boot recovery [ 2.4108 ] Applet version 01.00.0000 [ 2.4861 ] [ 3.4919 ] tegrarcm_v2 --isapplet [ 3.5662 ] [ 3.5705 ] tegrarcm_v2 --ismb2 [ 3.5723 ] MB2 Applet version 01.00.0000 [ 3.6620 ] [ 3.6666 ] tegrarcm_v2 --ismb2 [ 3.6684 ] MB2 Applet version 01.00.0000 [ 3.7586 ] [ 3.7631 ] Retrieving board information [ 3.7664 ] tegrarcm_v2 --oem platformdetails chip chip_info.bin [ 3.7680 ] MB2 Applet version 01.00.0000 [ 3.8455 ] Saved platform info in chip_info.bin [ 3.8493 ] Chip minor revision: 2 [ 3.8497 ] Bootrom revision: 0xf [ 3.8498 ] Ram code: 0x2 [ 3.8498 ] Chip sku: 0xd0 [ 3.8498 ] Chip Sample: non es [ 3.8498 ] [ 3.8504 ] Retrieving EEPROM data [ 3.8505 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/willian/orin/Linux_for_Tegra/bootloader/cvm.bin [ 3.8524 ] MB2 Applet version 01.00.0000 [ 3.9290 ] Saved platform info in /home/willian/orin/Linux_for_Tegra/bootloader/cvm.bin [ 3.9685 ] [ 3.9687 ] Rebooting to recovery mode [ 3.9727 ] tegrarcm_v2 --ismb2 [ 3.9741 ] MB2 Applet version 01.00.0000 [ 4.0460 ] [ 4.0461 ] Rebooting to recovery mode [ 4.0507 ] tegrarcm_v2 --reboot recovery [ 4.0527 ] MB2 Applet version 01.00.0000 [ 4.1492 ] Board ID(2888) version(400) sku(0004) revision(P.0) Copy /home/willian/orin/Linux_for_Tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb to /home/willian/orin/Linux_for_Tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb.rec copying bctfile(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-memcfg-p2888.cfg)... done. copying bctfile1(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-memcfg-sw-override.cfg)... done. copying uphy_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg)... done. copying device_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra19x-mb1-bct-device-sdmmc.cfg)... done. copying misc_cold_boot_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-misc-l4t.cfg)... done. copying misc_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-misc-flash.cfg)... done. copying pinmux_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg)... done. copying gpioint_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg)... done. copying pmic_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-pmic-p2888-0001-a04-E-0-p2822-0000.cfg)... done. copying pmc_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg)... done. copying prod_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg)... done. copying scr_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-scr-cbb-mini.cfg)... done. copying scr_cold_boot_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-scr-cbb-mini.cfg)... done. copying bootrom_config(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg)... done. copying dev_params(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-br-bct-sdmmc.cfg)... done. Existing bootloader(/home/willian/orin/Linux_for_Tegra/bootloader/nvtboot_cpu_t194.bin) reused. copying initrd(/home/willian/orin/Linux_for_Tegra/bootloader/l4t_initrd.img)... done. Making Boot image... done. /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash.py --chip 0x19 --key --cmd sign boot.img kernel Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0013 ] Generating signature [ 0.0044 ] tegrasign_v3.py --key --getmode mode.txt [ 0.0047 ] Assuming zero filled SBK key : not reading [ 0.0042 ] header_magic: 414e4452 [ 0.0369 ] tegrahost_v2 --chip 0x19 --align 1_boot_aligned.img [ 0.0382 ] [ 0.0405 ] tegrahost_v2 --chip 0x19 0 --magicid KRNL --appendsigheader 1_boot_aligned.img zerosbk [ 0.0417 ] adding BCH for 1_boot_aligned.img [ 1.2619 ] [ 1.2658 ] tegrasign_v3.py --key --list 1_boot_aligned_sigheader.img_list.xml [ 1.2661 ] Assuming zero filled SBK key : not reading [ 1.3682 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_boot_aligned_sigheader.img.encrypt 1_boot_aligned_sigheader.img.hash zerosbk [ 2.0871 ] [ 2.1508 ] Signed file: /home/willian/orin/Linux_for_Tegra/bootloader/temp_user_dir/boot_sigheader.img.encrypt l4t_sign_image.sh: Generate header for boot_sigheader.img.encrypt l4t_sign_image.sh: chip 0x19: add 0x2805800 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for boot_sigheader.img.encrypt l4t_sign_image.sh: the signed file is /home/willian/orin/Linux_for_Tegra/bootloader/temp_user_dir/boot_sigheader.img.encrypt Making recovery ramdisk for recovery image... Re-generating recovery ramdisk for recovery image... /home/willian/orin/Linux_for_Tegra/bootloader/ramdisk_tmp /home/willian/orin/Linux_for_Tegra/bootloader /home/willian/orin/Linux_for_Tegra 36137 blocks gzip: /home/willian/orin/Linux_for_Tegra/kernel/Image: not in gzip format _BASE_KERNEL_VERSION=5.10.65-tegra 52382 blocks Making Recovery image... copying recdtbfile(/home/willian/orin/Linux_for_Tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb.rec)... done. 20+0 records in 20+0 records out 20 bytes copied, 0.000522747 s, 38.3 kB/s Existing sosfile(/home/willian/orin/Linux_for_Tegra/bootloader/mb1_t194_prod.bin) reused. Existing tegraboot(/home/willian/orin/Linux_for_Tegra/bootloader/nvtboot_t194.bin) reused. Existing cpu_bootloader(/home/willian/orin/Linux_for_Tegra/bootloader/nvtboot_cpu_t194.bin) reused. Existing mb2blfile(/home/willian/orin/Linux_for_Tegra/bootloader/nvtboot_recovery_t194.bin) reused. Existing mtspreboot(/home/willian/orin/Linux_for_Tegra/bootloader/preboot_c10_prod_cr.bin) reused. Existing mcepreboot(/home/willian/orin/Linux_for_Tegra/bootloader/mce_c10_prod_cr.bin) reused. Existing mtsproper(/home/willian/orin/Linux_for_Tegra/bootloader/mts_c10_prod_cr.bin) reused. Existing mb1file(/home/willian/orin/Linux_for_Tegra/bootloader/mb1_t194_prod.bin) reused. Existing bpffile(/home/willian/orin/Linux_for_Tegra/bootloader/bpmp_t194.bin) reused. copying bpfdtbfile(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/tegra194-a02-bpmp-p2888-a04.dtb)... done. Existing scefile(/home/willian/orin/Linux_for_Tegra/bootloader/camera-rtcpu-sce.img) reused. Existing apefile(/home/willian/orin/Linux_for_Tegra/bootloader/adsp-fw.bin) reused. Existing spefile(/home/willian/orin/Linux_for_Tegra/bootloader/spe_t194.bin) reused. Existing wb0boot(/home/willian/orin/Linux_for_Tegra/bootloader/warmboot_t194_prod.bin) reused. Existing tosfile(/home/willian/orin/Linux_for_Tegra/bootloader/tos-optee_t194.img) reused. Existing eksfile(/home/willian/orin/Linux_for_Tegra/bootloader/eks.img) reused. copying soft_fuses(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/BCT/tegra194-mb1-soft-fuses-l4t.cfg)... done. copying dtbfile(/home/willian/orin/Linux_for_Tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb)... done. Copying nv_boot_control.conf to rootfs /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash.py --chip 0x19 --key --cmd sign kernel_tegra194-p2888-0001-p2822-0000.dtb kernel_dtb /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2598: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not check_ismb2(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2607: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:858: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not self.check_is_mb2applet(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:865: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0221 ] Generating signature [ 0.0256 ] tegrasign_v3.py --key --getmode mode.txt [ 0.0259 ] Assuming zero filled SBK key : not reading [ 0.0252 ] header_magic: d00dfeed [ 0.0280 ] tegrahost_v2 --chip 0x19 --align 1_kernel_tegra194-p2888-0001-p2822-0000_aligned.dtb [ 0.0298 ] [ 0.0326 ] tegrahost_v2 --chip 0x19 0 --magicid KDTB --appendsigheader 1_kernel_tegra194-p2888-0001-p2822-0000_aligned.dtb zerosbk [ 0.0341 ] adding BCH for 1_kernel_tegra194-p2888-0001-p2822-0000_aligned.dtb [ 0.0518 ] [ 0.0568 ] tegrasign_v3.py --key --list 1_kernel_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb_list.xml [ 0.0571 ] Assuming zero filled SBK key : not reading [ 0.0628 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_kernel_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb.encrypt 1_kernel_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb.hash zerosbk [ 0.0716 ] [ 0.0730 ] Signed file: /home/willian/orin/Linux_for_Tegra/bootloader/temp_user_dir/kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: Generate header for kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: chip 0x19: add 0x5ccd4 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: the signed file is /home/willian/orin/Linux_for_Tegra/bootloader/temp_user_dir/kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt populating kernel to rootfs... done. populating initrd to rootfs... done. populating kernel_tegra194-p2888-0001-p2822-0000.dtb to rootfs... done. Making system.img... Setting "FDT /boot/dtb/kernel_tegra194-p2888-0001-p2822-0000.dtb" successfully in the extlinux.conf...done. populating rootfs from /home/willian/orin/Linux_for_Tegra/rootfs ... populating /boot/extlinux/extlinux.conf ... done. generating sig file of Image ... /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash.py --chip 0x19 --key --cmd sign ./boot/Image kernel /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2598: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not check_ismb2(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2607: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:858: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not self.check_is_mb2applet(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:865: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0234 ] Generating signature [ 0.0271 ] tegrasign_v3.py --key --getmode mode.txt [ 0.0274 ] Assuming zero filled SBK key : not reading [ 0.0285 ] header_magic: 4d5a0091 [ 0.0990 ] tegrahost_v2 --chip 0x19 --align 1_Image_aligned [ 0.1002 ] [ 0.1024 ] tegrahost_v2 --chip 0x19 0 --magicid KRNL --appendsigheader 1_Image_aligned zerosbk [ 0.1035 ] adding BCH for 1_Image_aligned [ 1.0884 ] [ 1.0927 ] tegrasign_v3.py --key --list 1_Image_aligned_sigheader_list.xml [ 1.0929 ] Assuming zero filled SBK key : not reading [ 1.1818 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_Image_aligned_sigheader.encrypt 1_Image_aligned_sigheader.hash zerosbk [ 1.7061 ] [ 1.7611 ] Signed file: /home/willian/orin/Linux_for_Tegra/bootloader/mnt/Image_sigheader.encrypt l4t_sign_image.sh: Generate header for Image_sigheader.encrypt l4t_sign_image.sh: chip 0x19: add 0x2003200 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for Image_sigheader.encrypt l4t_sign_image.sh: the sign header is saved at ./boot/Image.sig done. generating sig file of kernel_tegra194-p2888-0001-p2822-0000.dtb ... /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash.py --chip 0x19 --key --cmd sign ./boot/dtb/kernel_tegra194-p2888-0001-p2822-0000.dtb kernel_dtb /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2598: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not check_ismb2(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2607: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:858: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not self.check_is_mb2applet(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:865: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0220 ] Generating signature [ 0.0243 ] tegrasign_v3.py --key --getmode mode.txt [ 0.0246 ] Assuming zero filled SBK key : not reading [ 0.0257 ] header_magic: d00dfeed [ 0.0295 ] tegrahost_v2 --chip 0x19 --align 1_kernel_tegra194-p2888-0001-p2822-0000_aligned.dtb [ 0.0312 ] [ 0.0337 ] tegrahost_v2 --chip 0x19 0 --magicid KDTB --appendsigheader 1_kernel_tegra194-p2888-0001-p2822-0000_aligned.dtb zerosbk [ 0.0349 ] adding BCH for 1_kernel_tegra194-p2888-0001-p2822-0000_aligned.dtb [ 0.0530 ] [ 0.0573 ] tegrasign_v3.py --key --list 1_kernel_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb_list.xml [ 0.0576 ] Assuming zero filled SBK key : not reading [ 0.0626 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_kernel_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb.encrypt 1_kernel_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb.hash zerosbk [ 0.0733 ] [ 0.0745 ] Signed file: /home/willian/orin/Linux_for_Tegra/bootloader/mnt/kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: Generate header for kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: chip 0x19: add 0x5ccd4 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt l4t_sign_image.sh: the sign header is saved at ./boot/dtb/kernel_tegra194-p2888-0001-p2822-0000.dtb.sig done. generating sig file of initrd ... /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash.py --chip 0x19 --key --cmd sign ./boot/initrd data /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2598: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not check_ismb2(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2607: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:858: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not self.check_is_mb2applet(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:865: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.2103 ] Generating signature [ 0.2141 ] tegrasign_v3.py --key --getmode mode.txt [ 0.2144 ] Assuming zero filled SBK key : not reading [ 0.2204 ] header_magic: 1f8b0800 [ 0.2730 ] tegrahost_v2 --chip 0x19 --align 1_initrd_aligned [ 0.2746 ] [ 0.2772 ] tegrahost_v2 --chip 0x19 0 --magicid DATA --appendsigheader 1_initrd_aligned zerosbk [ 0.2792 ] adding BCH for 1_initrd_aligned [ 0.5408 ] [ 0.5449 ] tegrasign_v3.py --key --list 1_initrd_aligned_sigheader_list.xml [ 0.5452 ] Assuming zero filled SBK key : not reading [ 0.5717 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_initrd_aligned_sigheader.encrypt 1_initrd_aligned_sigheader.hash zerosbk [ 0.7118 ] [ 0.7242 ] Signed file: /home/willian/orin/Linux_for_Tegra/bootloader/mnt/initrd_sigheader.encrypt l4t_sign_image.sh: Generate header for initrd_sigheader.encrypt l4t_sign_image.sh: chip 0x19: add 0x80139e to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for initrd_sigheader.encrypt l4t_sign_image.sh: the sign header is saved at ./boot/initrd.sig done. generating sig file of extlinux.conf ... /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash.py --chip 0x19 --key --cmd sign ./boot/extlinux/extlinux.conf data /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2598: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not check_ismb2(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2607: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:858: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not self.check_is_mb2applet(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:865: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0223 ] Generating signature [ 0.0258 ] tegrasign_v3.py --key --getmode mode.txt [ 0.0261 ] Assuming zero filled SBK key : not reading [ 0.0254 ] header_magic: 54494d45 [ 0.0280 ] tegrahost_v2 --chip 0x19 --align 1_extlinux_aligned.conf [ 0.0294 ] [ 0.0325 ] tegrahost_v2 --chip 0x19 0 --magicid DATA --appendsigheader 1_extlinux_aligned.conf zerosbk [ 0.0337 ] adding BCH for 1_extlinux_aligned.conf [ 0.0341 ] [ 0.0384 ] tegrasign_v3.py --key --list 1_extlinux_aligned_sigheader.conf_list.xml [ 0.0386 ] Assuming zero filled SBK key : not reading [ 0.0426 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_extlinux_aligned_sigheader.conf.encrypt 1_extlinux_aligned_sigheader.conf.hash zerosbk [ 0.0441 ] [ 0.0446 ] Signed file: /home/willian/orin/Linux_for_Tegra/bootloader/mnt/extlinux_sigheader.conf.encrypt l4t_sign_image.sh: Generate header for extlinux_sigheader.conf.encrypt l4t_sign_image.sh: chip 0x19: add 0x3e0 to offset 0x8 in sig file l4t_sign_image.sh: Generate 16-byte-size-aligned base file for extlinux_sigheader.conf.encrypt l4t_sign_image.sh: the sign header is saved at ./boot/extlinux/extlinux.conf.sig done. Sync'ing system.img ... done. Converting RAW image to Sparse image... done. system.img built successfully. Existing tbcfile(/home/willian/orin/Linux_for_Tegra/bootloader/cboot_t194.bin) reused. copying tbcdtbfile(/home/willian/orin/Linux_for_Tegra/kernel/dtb/tegra194-p2888-0001-p2822-0000.dtb)... done. slot_metadata.bin slot_metadata.bin copying cfgfile(/home/willian/orin/Linux_for_Tegra/bootloader/t186ref/cfg/flash_t194_sdmmc.xml) to flash.xml... done. Existing flasher(/home/willian/orin/Linux_for_Tegra/bootloader/nvtboot_recovery_cpu_t194.bin) reused. Existing flashapp(/home/willian/orin/Linux_for_Tegra/bootloader/tegraflash.py) reused. Existing overlay_dtb(/home/willian/orin/Linux_for_Tegra/bootloader/tegra194-p2822-camera-dual-imx274-overlay.dtbo) reused. Existing overlay_dtb(/home/willian/orin/Linux_for_Tegra/bootloader/tegra194-p2822-camera-e3331-overlay.dtbo) reused. Existing overlay_dtb(/home/willian/orin/Linux_for_Tegra/bootloader/tegra194-p2822-camera-e3333-overlay.dtbo) reused. Existing overlay_dtb(/home/willian/orin/Linux_for_Tegra/bootloader/tegra194-p2822-camera-imx185-overlay.dtbo) reused. Existing overlay_dtb(/home/willian/orin/Linux_for_Tegra/bootloader/tegra194-p2822-camera-imx390-overlay.dtbo) reused. Existing overlay_dtb(/home/willian/orin/Linux_for_Tegra/bootloader/tegra194-p2888-0005-overlay.dtbo) reused. Existing overlay_dtb(/home/willian/orin/Linux_for_Tegra/bootloader/tegra194-p2888-0001-p2822-0000-overlay.dtbo) reused. ./tegraflash.py --bl nvtboot_recovery_cpu_t194.bin --sdram_config tegra194-mb1-bct-memcfg-p2888.cfg,tegra194-memcfg-sw-override.cfg --odmdata 0x9190000 --overlay_dtb tegra194-p2822-camera-dual-imx274-overlay.dtbo,tegra194-p2822-camera-e3331-overlay.dtbo,tegra194-p2822-camera-e3333-overlay.dtbo,tegra194-p2822-camera-imx185-overlay.dtbo,tegra194-p2822-camera-imx390-overlay.dtbo,tegra194-p2888-0005-overlay.dtbo,tegra194-p2888-0001-p2822-0000-overlay.dtbo --bldtb tegra194-p2888-0001-p2822-0000.dtb --applet mb1_t194_prod.bin --cmd "flash; reboot" --soft_fuses tegra194-mb1-soft-fuses-l4t.cfg --cfg flash.xml --chip 0x19 --uphy_config tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg --device_config tegra19x-mb1-bct-device-sdmmc.cfg --misc_cold_boot_config tegra194-mb1-bct-misc-l4t.cfg --misc_config tegra194-mb1-bct-misc-flash.cfg --pinmux_config tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg --gpioint_config tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg --pmic_config tegra194-mb1-bct-pmic-p2888-0001-a04-E-0-p2822-0000.cfg --pmc_config tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg --prod_config tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg --scr_config tegra194-mb1-bct-scr-cbb-mini.cfg --scr_cold_boot_config tegra194-mb1-bct-scr-cbb-mini.cfg --br_cmd_config tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg --dev_params tegra194-br-bct-sdmmc.cfg --bin "mb2_bootloader nvtboot_recovery_t194.bin; mts_preboot preboot_c10_prod_cr.bin; mts_mce mce_c10_prod_cr.bin; mts_proper mts_c10_prod_cr.bin; bpmp_fw bpmp_t194.bin; bpmp_fw_dtb tegra194-a02-bpmp-p2888-a04.dtb; spe_fw spe_t194.bin; tlk tos-optee_t194.img; eks eks.img; bootloader_dtb tegra194-p2888-0001-p2822-0000.dtb" saving flash command in /home/willian/orin/Linux_for_Tegra/bootloader/flashcmd.txt saving Windows flash command to /home/willian/orin/Linux_for_Tegra/bootloader/flash_win.bat *** Flashing target device started. *** /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2598: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not check_ismb2(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_internal.py:2607: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:858: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not self.check_is_mb2applet(): /home/willian/orin/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:865: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0401 ] tegrasign_v3.py --key None --getmode mode.txt [ 0.0404 ] Assuming zero filled SBK key [ 0.0034 ] Generating RCM messages [ 0.0065 ] tegrahost_v2 --chip 0x19 0 --magicid MB1B --appendsigheader mb1_t194_prod.bin zerosbk [ 0.0078 ] Header already present for mb1_t194_prod.bin [ 0.0168 ] [ 0.0573 ] tegrasign_v3.py --key None --getmode mode.txt [ 0.0578 ] Assuming zero filled SBK key [ 0.0244 ] tegrabct_v2 --chip 0x19 0 --sfuse tegra194-mb1-soft-fuses-l4t.cfg sfuse.bin [ 0.0290 ] [ 0.0334 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x19 0 --sfuses sfuse.bin --download rcm mb1_t194_prod_sigheader.bin 0 0 [ 0.0355 ] RCM 0 is saved as rcm_0.rcm [ 0.0438 ] RCM 1 is saved as rcm_1.rcm [ 0.0438 ] RCM 2 is saved as rcm_2.rcm [ 0.0438 ] List of rcm files are saved in rcm_list.xml [ 0.0438 ] [ 0.0438 ] Signing RCM messages [ 0.0839 ] tegrasign_v3.py --key None --list rcm_list.xml --getmontgomeryvalues montgomery.bin --pubkeyhash pub_key.key [ 0.0842 ] Assuming zero filled SBK key [ 0.0978 ] Warning: pub_key.key is not found [ 0.0606 ] Copying signature to RCM mesages [ 0.0637 ] tegrarcm_v2 --chip 0x19 0 --updatesig rcm_list_signed.xml [ 0.0657 ] [ 0.0659 ] odmdata (to decode) = 152633344 [ 0.0659 ] Odmdata strings: PCIE_XBAR_4_1_0_1_2,UFS_x1_L1,NVHS_PCIE,enable-debug-console,enable-denver-wdt [ 0.0659 ] Bpmp odmdata config: {'pcie-xbar-config': [0, 1, 'PCIE_XBAR_4_1_0_1_2'], 'pcie-c0-endpoint-enable': [1, 0, ''], 'pcie-c4-endpoint-enable': [1, 0, ''], 'ufs-config': [0, 1, 'UFS_x1_L1'], 'sata-enable': [1, 0, ''], 'nvhs-owner': [0, 1, 'PCIE'], 'pcie-c5-endpoint-enable': [1, 0, '']} [ 0.8106 ] Change tegra194-p2888-0001-p2822-0000.dtb to tegra194-p2888-0001-p2822-0000_with_odm_overlay.dtb [ 0.8130 ] Change tegra194-p2888-0001-p2822-0000.dtb to tegra194-p2888-0001-p2822-0000_with_odm_overlay.dtb [ 0.8145 ] Concatenating tegra194-p2822-camera-dual-imx274-overlay.dtbo,tegra194-p2822-camera-e3331-overlay.dtbo,tegra194-p2822-camera-e3333-overlay.dtbo,tegra194-p2822-camera-imx185-overlay.dtbo,tegra194-p2822-camera-imx390-overlay.dtbo,tegra194-p2888-0005-overlay.dtbo,tegra194-p2888-0001-p2822-0000-overlay.dtbo to tegra194-p2888-0001-p2822-0000_with_odm_overlay.dtb [ 0.8149 ] Parsing partition layout [ 0.8183 ] tegraparser_v2 --pt flash.xml.tmp [ 0.8221 ] [ 0.8224 ] Reading ramcode from backup chip_info.bin file [ 0.8227 ] RAMCODE Read from Device: 2 [ 0.8228 ] Disable BPMP dtb trim, using default dtb [ 0.8228 ] [ 0.8228 ] Creating list of images to be signed [ 0.8261 ] tegrahost_v2 --chip 0x19 0 --partitionlayout flash.xml.bin --list images_list.xml zerosbk [ 0.8276 ] MB1: Nvheader already present is mb1_t194_prod_aligned.bin [ 0.8293 ] Header already present for mb1_t194_prod_aligned_sigheader.bin [ 0.8307 ] MB1: Nvheader already present is mb1_t194_prod_aligned.bin [ 0.8370 ] Header already present for mb1_t194_prod_aligned_sigheader.bin [ 0.8379 ] adding BCH for spe_t194_aligned.bin [ 0.8438 ] adding BCH for nvtboot_t194_aligned.bin [ 0.8475 ] Header already present for preboot_c10_prod_cr_aligned.bin [ 0.8530 ] adding BCH for spe_t194_aligned.bin [ 0.8534 ] adding BCH for nvtboot_t194_aligned.bin [ 0.8564 ] Header already present for preboot_c10_prod_cr_aligned.bin [ 0.8617 ] Header already present for mce_c10_prod_cr_aligned.bin [ 0.8631 ] adding BCH for mts_c10_prod_cr_aligned.bin [ 0.8822 ] adding BCH for cboot_t194_aligned.bin [ 0.9866 ] adding BCH for tegra194-p2888-0001-p2822-0000_with_odm_overlay_aligned.dtb [ 1.0007 ] adding BCH for tos-optee_t194_aligned.img [ 1.0176 ] adding BCH for eks_aligned.img [ 1.0361 ] adding BCH for bpmp_t194_aligned.bin [ 1.0403 ] adding BCH for tegra194-a02-bpmp-p2888-a04_aligned.dtb [ 1.0676 ] adding BCH for xusb_sil_rel_fw_aligned [ 1.0971 ] adding BCH for adsp-fw_aligned.bin [ 1.1027 ] Header already present for warmboot_t194_prod_aligned.bin [ 1.1152 ] adding BCH for boot_aligned.img [ 1.2306 ] adding BCH for kernel_tegra194-p2888-0001-p2822-0000_aligned.dtb [ 2.4253 ] Header already present for mce_c10_prod_cr_aligned.bin [ 2.4361 ] adding BCH for mts_c10_prod_cr_aligned.bin [ 2.4491 ] adding BCH for cboot_t194_aligned.bin [ 2.5484 ] adding BCH for tegra194-p2888-0001-p2822-0000_with_odm_overlay_aligned.dtb [ 2.5622 ] adding BCH for tos-optee_t194_aligned.img [ 2.5771 ] adding BCH for eks_aligned.img [ 2.5924 ] adding BCH for bpmp_t194_aligned.bin [ 2.5948 ] adding BCH for tegra194-a02-bpmp-p2888-a04_aligned.dtb [ 2.6228 ] adding BCH for xusb_sil_rel_fw_aligned [ 2.6551 ] adding BCH for adsp-fw_aligned.bin [ 2.6599 ] Header already present for warmboot_t194_prod_aligned.bin [ 2.6720 ] adding BCH for boot_aligned.img [ 2.8721 ] adding BCH for kernel_tegra194-p2888-0001-p2822-0000_aligned.dtb [ 4.1322 ] adding BCH for recovery_aligned.img [ 4.3365 ] adding BCH for tegra194-p2888-0001-p2822-0000.dtb_aligned.rec [ 5.6395 ] [ 5.6395 ] Filling MB1 storage info [ 5.6396 ] Generating br-bct [ 5.6429 ] Performing cfg overlay [ 5.6430 ] ['tegra194-mb1-bct-memcfg-p2888.cfg', 'tegra194-memcfg-sw-override.cfg'] [ 5.6434 ] sw_memcfg_overlay.pl -c tegra194-mb1-bct-memcfg-p2888.cfg -s tegra194-memcfg-sw-override.cfg -o /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1.cfg [ 5.7097 ] [ 5.7100 ] Updating dev and MSS params in BR BCT [ 5.7100 ] tegrabct_v2 --dev_param tegra194-br-bct-sdmmc.cfg --sdram /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1.cfg --brbct br_bct.cfg --sfuse tegra194-mb1-soft-fuses-l4t.cfg --chip 0x19 0 [ 5.8075 ] [ 5.8076 ] Updating bl info [ 5.8107 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updateblinfo flash.xml.bin [ 5.8141 ] [ 5.8142 ] Generating signatures [ 5.8547 ] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key [ 5.8552 ] Assuming zero filled SBK key [ 6.3778 ] Warning: pub_key.key is not found [ 6.3406 ] Generating br-bct [ 6.3433 ] Performing cfg overlay [ 6.3434 ] ['/home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1.cfg'] [ 6.3434 ] Updating dev and MSS params in BR BCT [ 6.3435 ] tegrabct_v2 --dev_param tegra194-br-bct-sdmmc.cfg --sdram /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1.cfg --brbct br_bct.cfg --sfuse tegra194-mb1-soft-fuses-l4t.cfg --chip 0x19 0 [ 6.4484 ] [ 6.4485 ] Updating bl info [ 6.4516 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml [ 6.4559 ] [ 6.4560 ] Updating smd info [ 6.4594 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 --updatesmdinfo flash.xml.bin [ 6.4626 ] [ 6.4626 ] Updating Odmdata [ 6.4665 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updatefields Odmdata =0x9190000 [ 6.4685 ] [ 6.4686 ] Get Signed section of bct [ 6.4715 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --listbct bct_list.xml [ 6.4735 ] [ 6.4736 ] Signing BCT [ 6.5144 ] tegrasign_v3.py --key None --list bct_list.xml --getmontgomeryvalues montgomery.bin --pubkeyhash pub_key.key [ 6.5150 ] Assuming zero filled SBK key [ 6.5196 ] Warning: pub_key.key is not found [ 6.4824 ] Updating BCT with signature [ 6.4857 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x19 0 --updatesig bct_list_signed.xml [ 6.4877 ] [ 6.4877 ] Generating coldboot mb1-bct [ 6.4912 ] tegrabct_v2 --chip 0x19 0 --mb1bct mb1_cold_boot_bct.cfg --sdram /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1.cfg --misc tegra194-mb1-bct-misc-l4t.cfg --scr tegra194-mb1-bct-scr-cbb-mini.cfg --pinmux tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg --pmc tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg --pmic tegra194-mb1-bct-pmic-p2888-0001-a04-E-0-p2822-0000.cfg --brcommand tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg --prod tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg --gpioint tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg --uphy tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg --device tegra19x-mb1-bct-device-sdmmc.cfg [ 6.4930 ] MB1-BCT version: 0x1 [ 6.4937 ] Parsing config file :tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg [ 6.4948 ] Added Platform Config 0 data with size :- 3168 [ 6.4982 ] Parsing config file :tegra194-mb1-bct-scr-cbb-mini.cfg [ 6.4991 ] Added Platform Config 1 data with size :- 19640 [ 6.5190 ] Parsing config file :tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg [ 6.5198 ] Added Platform Config 2 data with size :- 24 [ 6.5202 ] Parsing config file :tegra194-mb1-bct-pmic-p2888-0001-a04-E-0-p2822-0000.cfg [ 6.5209 ] File read failed [ 6.5210 ] File read failed [ 6.5212 ] Added Platform Config 4 data with size :- 348 [ 6.5216 ] Parsing config file :tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg [ 6.5222 ] Added Platform Config 3 data with size :- 92 [ 6.5226 ] Parsing config file :tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg [ 6.5227 ] Added Platform Config 5 data with size :- 68 [ 6.5227 ] [ 6.5227 ] Parsing config file :tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg [ 6.5227 ] Added Platform Config 7 data with size :- 392 [ 6.5227 ] [ 6.5227 ] Parsing config file :tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg [ 6.5227 ] Added Platform Config 8 data with size :- 12 [ 6.5227 ] [ 6.5228 ] Parsing config file :tegra19x-mb1-bct-device-sdmmc.cfg [ 6.5228 ] Added Platform Config 9 data with size :- 32 [ 6.5228 ] [ 6.5228 ] Updating mb1-bct with firmware information [ 6.5258 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo flash.xml.bin [ 6.5280 ] [ 6.5280 ] Updating mb1-bct with storage information [ 6.5307 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_cold_boot_bct_MB1.bct --updatestorageinfo flash.xml.bin [ 6.5325 ] [ 6.5356 ] tegrahost_v2 --chip 0x19 --align mb1_cold_boot_bct_MB1_aligned.bct [ 6.5376 ] [ 6.5422 ] tegrahost_v2 --chip 0x19 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk [ 6.5441 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct [ 6.5457 ] [ 6.5877 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml [ 6.5881 ] Assuming zero filled SBK key [ 6.5574 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 6.5597 ] [ 6.5602 ] Generating recovery mb1-bct [ 6.5636 ] tegrabct_v2 --chip 0x19 0 --mb1bct mb1_bct.cfg --sdram /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1.cfg --misc tegra194-mb1-bct-misc-flash.cfg --scr tegra194-mb1-bct-scr-cbb-mini.cfg --pinmux tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg --pmc tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg --pmic tegra194-mb1-bct-pmic-p2888-0001-a04-E-0-p2822-0000.cfg --brcommand tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg --prod tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg --gpioint tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg --uphy tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg --device tegra19x-mb1-bct-device-sdmmc.cfg [ 6.5654 ] MB1-BCT version: 0x1 [ 6.5659 ] Parsing config file :tegra19x-mb1-pinmux-p2888-0000-a04-p2822-0000-b01.cfg [ 6.5671 ] Added Platform Config 0 data with size :- 3168 [ 6.5697 ] Parsing config file :tegra194-mb1-bct-scr-cbb-mini.cfg [ 6.5703 ] Added Platform Config 1 data with size :- 19640 [ 6.5913 ] Parsing config file :tegra19x-mb1-padvoltage-p2888-0000-a00-p2822-0000-a00.cfg [ 6.5921 ] Added Platform Config 2 data with size :- 24 [ 6.5926 ] Parsing config file :tegra194-mb1-bct-pmic-p2888-0001-a04-E-0-p2822-0000.cfg [ 6.5934 ] File read failed [ 6.5934 ] File read failed [ 6.5934 ] Added Platform Config 4 data with size :- 348 [ 6.5934 ] [ 6.5934 ] Parsing config file :tegra194-mb1-bct-reset-p2888-0000-p2822-0000.cfg [ 6.5934 ] Added Platform Config 3 data with size :- 92 [ 6.5935 ] [ 6.5935 ] Parsing config file :tegra19x-mb1-prod-p2888-0000-p2822-0000.cfg [ 6.5935 ] Added Platform Config 5 data with size :- 68 [ 6.5935 ] [ 6.5935 ] Parsing config file :tegra194-mb1-bct-gpioint-p2888-0000-p2822-0000.cfg [ 6.5935 ] Added Platform Config 7 data with size :- 392 [ 6.5935 ] [ 6.5935 ] Parsing config file :tegra194-mb1-uphy-lane-p2888-0000-p2822-0000.cfg [ 6.5935 ] Added Platform Config 8 data with size :- 12 [ 6.5935 ] [ 6.5936 ] Parsing config file :tegra19x-mb1-bct-device-sdmmc.cfg [ 6.5936 ] Added Platform Config 9 data with size :- 32 [ 6.5936 ] [ 6.5936 ] Updating mb1-bct with firmware information [ 6.5963 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo flash.xml.bin [ 6.5984 ] [ 6.5985 ] Updating mb1-bct with storage information [ 6.6013 ] tegrabct_v2 --chip 0x19 --mb1bct mb1_bct_MB1.bct --updatestorageinfo flash.xml.bin [ 6.6053 ] [ 6.6088 ] tegrahost_v2 --chip 0x19 --align mb1_bct_MB1_aligned.bct [ 6.6109 ] [ 6.6140 ] tegrahost_v2 --chip 0x19 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk [ 6.6157 ] adding BCH for mb1_bct_MB1_aligned.bct [ 6.6172 ] [ 6.6579 ] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml [ 6.6582 ] Assuming zero filled SBK key [ 6.6271 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 6.6299 ] [ 6.6304 ] Generating coldboot mem-bct [ 6.6347 ] tegrabct_v2 --chip 0x19 0 --sdram /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1.cfg --membct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_1.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_2.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_3.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_4.bct [ 6.6369 ] Packing sdram param for instance[0] [ 6.7356 ] Packing sdram param for instance[1] [ 6.7359 ] Packing sdram param for instance[2] [ 6.7361 ] Packing sdram param for instance[3] [ 6.7364 ] Packing sdram param for instance[4] [ 6.7365 ] Packing sdram param for instance[5] [ 6.7365 ] Packing sdram param for instance[6] [ 6.7365 ] Packing sdram param for instance[7] [ 6.7365 ] Packing sdram param for instance[8] [ 6.7365 ] Packing sdram param for instance[9] [ 6.7365 ] Packing sdram param for instance[10] [ 6.7365 ] Packing sdram param for instance[11] [ 6.7365 ] Packing sdram param for instance[12] [ 6.7365 ] Packing sdram param for instance[13] [ 6.7365 ] Packing sdram param for instance[14] [ 6.7365 ] Packing sdram param for instance[15] [ 6.7365 ] [ 6.7366 ] Getting sector size from pt [ 6.7392 ] tegraparser_v2 --getsectorsize flash.xml.bin sector_info.bin [ 6.7409 ] [ 6.7410 ] BlockSize read from layout is 200 [ 6.7435 ] tegrahost_v2 --chip 0x19 0 --blocksize 512 --magicid MEMB --addsigheader_multi /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_1.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_2.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_3.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_4.bct [ 6.7451 ] adding BCH for /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_1.bct [ 6.7503 ] [ 6.7540 ] tegrahost_v2 --chip 0x19 --align mem_coldboot_aligned.bct [ 6.7560 ] [ 6.7592 ] tegrahost_v2 --chip 0x19 0 --magicid MEMB --appendsigheader mem_coldboot_aligned.bct zerosbk [ 6.7612 ] Header already present for mem_coldboot_aligned.bct [ 6.7621 ] [ 6.8046 ] tegrasign_v3.py --key None --list mem_coldboot_aligned_sigheader.bct_list.xml [ 6.8049 ] Assuming zero filled SBK key [ 6.7748 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mem_coldboot_aligned_sigheader.bct.encrypt mem_coldboot_aligned_sigheader.bct.hash zerosbk [ 6.7772 ] [ 6.7778 ] Generating recovery mem-bct [ 6.7811 ] tegrabct_v2 --chip 0x19 0 --sdram /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1.cfg --membct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_1.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_2.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_3.bct /home/willian/orin/Linux_for_Tegra/bootloader/5230/tmp50ngtp8o1_4.bct [ 6.7828 ] Packing sdram param for instance[0] [ 6.8860 ] Packing sdram param for instance[1] [ 6.8863 ] Packing sdram param for instance[2] [ 6.8866 ] Packing sdram param for instance[3] [ 6.8868 ] Packing sdram param for instance[4] [ 6.8871 ] Packing sdram param for instance[5] [ 6.8871 ] Packing sdram param for instance[6] [ 6.8871 ] Packing sdram param for instance[7] [ 6.8871 ] Packing sdram param for instance[8] [ 6.8872 ] Packing sdram param for instance[9] [ 6.8872 ] Packing sdram param for instance[10] [ 6.8872 ] Packing sdram param for instance[11] [ 6.8872 ] Packing sdram param for instance[12] [ 6.8872 ] Packing sdram param for instance[13] [ 6.8872 ] Packing sdram param for instance[14] [ 6.8872 ] Packing sdram param for instance[15] [ 6.8872 ] [ 6.8903 ] tegrahost_v2 --chip 0x19 --align mem_rcm_aligned.bct [ 6.8918 ] [ 6.8946 ] tegrahost_v2 --chip 0x19 0 --magicid MEMB --appendsigheader mem_rcm_aligned.bct zerosbk [ 6.8960 ] adding BCH for mem_rcm_aligned.bct [ 6.8987 ] [ 6.9403 ] tegrasign_v3.py --key None --list mem_rcm_aligned_sigheader.bct_list.xml [ 6.9406 ] Assuming zero filled SBK key [ 6.9101 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mem_rcm_aligned_sigheader.bct.encrypt mem_rcm_aligned_sigheader.bct.hash zerosbk [ 6.9136 ] [ 6.9142 ] Copying signatures [ 6.9190 ] tegrahost_v2 --chip 0x19 0 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml [ 9.4723 ] [ 9.4723 ] Boot Rom communication [ 9.4752 ] tegrarcm_v2 --chip 0x19 0 --rcm rcm_list_signed.xml [ 9.4769 ] BR_CID: 0x880219116429e0461000000002fe8100 [ 9.5061 ] RCM version 0X190001 [ 9.5506 ] Boot Rom communication completed [ 10.5655 ] [ 11.5729 ] tegrarcm_v2 --isapplet [ 11.5769 ] Applet version 01.00.0000 [ 11.6561 ] [ 11.6562 ] Sending BCTs [ 11.6613 ] tegrarcm_v2 --download bct_bootrom br_bct_BR.bct --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt --download bct_mem mem_rcm_sigheader.bct.encrypt [ 11.6637 ] Applet version 01.00.0000 [ 11.7561 ] Sending bct_bootrom [ 11.7566 ] [................................................] 100% [ 11.7586 ] Sending bct_mb1 [ 11.7617 ] [................................................] 100% [ 11.7657 ] Sending bct_mem [ 11.8093 ] [................................................] 100% [ 11.8515 ] [ 11.8517 ] Generating blob [ 11.8566 ] tegrahost_v2 --chip 0x19 --align blob_nvtboot_recovery_cpu_t194_aligned.bin [ 11.8591 ] [ 11.8625 ] tegrahost_v2 --chip 0x19 0 --magicid CPBL --appendsigheader blob_nvtboot_recovery_cpu_t194_aligned.bin zerosbk [ 11.8640 ] adding BCH for blob_nvtboot_recovery_cpu_t194_aligned.bin [ 11.8731 ] [ 11.9140 ] tegrasign_v3.py --key None --list blob_nvtboot_recovery_cpu_t194_aligned_sigheader.bin_list.xml [ 11.9145 ] Assuming zero filled SBK key [ 11.8850 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_nvtboot_recovery_cpu_t194_aligned_sigheader.bin.encrypt blob_nvtboot_recovery_cpu_t194_aligned_sigheader.bin.hash zerosbk [ 11.8915 ] [ 11.8972 ] tegrahost_v2 --chip 0x19 --align blob_nvtboot_recovery_t194_aligned.bin [ 11.8989 ] [ 11.9020 ] tegrahost_v2 --chip 0x19 0 --magicid MB2B --appendsigheader blob_nvtboot_recovery_t194_aligned.bin zerosbk [ 11.9040 ] adding BCH for blob_nvtboot_recovery_t194_aligned.bin [ 11.9124 ] [ 11.9530 ] tegrasign_v3.py --key None --list blob_nvtboot_recovery_t194_aligned_sigheader.bin_list.xml [ 11.9533 ] Assuming zero filled SBK key [ 11.9220 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_nvtboot_recovery_t194_aligned_sigheader.bin.encrypt blob_nvtboot_recovery_t194_aligned_sigheader.bin.hash zerosbk [ 11.9275 ] [ 11.9314 ] tegrahost_v2 --chip 0x19 --align blob_preboot_c10_prod_cr_aligned.bin [ 11.9333 ] [ 11.9365 ] tegrahost_v2 --chip 0x19 0 --magicid MTSP --appendsigheader blob_preboot_c10_prod_cr_aligned.bin zerosbk [ 11.9399 ] Header already present for blob_preboot_c10_prod_cr_aligned.bin [ 11.9409 ] [ 11.9825 ] tegrasign_v3.py --key None --list blob_preboot_c10_prod_cr_aligned_sigheader.bin_list.xml [ 11.9828 ] Assuming zero filled SBK key [ 11.9522 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_preboot_c10_prod_cr_aligned_sigheader.bin.encrypt blob_preboot_c10_prod_cr_aligned_sigheader.bin.hash zerosbk [ 11.9546 ] [ 11.9589 ] tegrahost_v2 --chip 0x19 --align blob_mce_c10_prod_cr_aligned.bin [ 11.9612 ] [ 11.9643 ] tegrahost_v2 --chip 0x19 0 --magicid MTSM --appendsigheader blob_mce_c10_prod_cr_aligned.bin zerosbk [ 11.9660 ] Header already present for blob_mce_c10_prod_cr_aligned.bin [ 11.9698 ] [ 12.0110 ] tegrasign_v3.py --key None --list blob_mce_c10_prod_cr_aligned_sigheader.bin_list.xml [ 12.0113 ] Assuming zero filled SBK key [ 11.9821 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_mce_c10_prod_cr_aligned_sigheader.bin.encrypt blob_mce_c10_prod_cr_aligned_sigheader.bin.hash zerosbk [ 11.9869 ] [ 11.9942 ] tegrahost_v2 --chip 0x19 --align blob_mts_c10_prod_cr_aligned.bin [ 11.9961 ] [ 11.9998 ] tegrahost_v2 --chip 0x19 0 --magicid MTSB --appendsigheader blob_mts_c10_prod_cr_aligned.bin zerosbk [ 12.0024 ] adding BCH for blob_mts_c10_prod_cr_aligned.bin [ 12.1069 ] [ 12.1477 ] tegrasign_v3.py --key None --list blob_mts_c10_prod_cr_aligned_sigheader.bin_list.xml [ 12.1481 ] Assuming zero filled SBK key [ 12.1249 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_mts_c10_prod_cr_aligned_sigheader.bin.encrypt blob_mts_c10_prod_cr_aligned_sigheader.bin.hash zerosbk [ 12.1810 ] [ 12.1872 ] tegrahost_v2 --chip 0x19 --align blob_bpmp_t194_aligned.bin [ 12.1891 ] [ 12.1949 ] tegrahost_v2 --chip 0x19 0 --magicid BPMF --appendsigheader blob_bpmp_t194_aligned.bin zerosbk [ 12.1970 ] adding BCH for blob_bpmp_t194_aligned.bin [ 12.2257 ] [ 12.2661 ] tegrasign_v3.py --key None --list blob_bpmp_t194_aligned_sigheader.bin_list.xml [ 12.2663 ] Assuming zero filled SBK key [ 12.2382 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_bpmp_t194_aligned_sigheader.bin.encrypt blob_bpmp_t194_aligned_sigheader.bin.hash zerosbk [ 12.2571 ] [ 12.2617 ] tegrahost_v2 --chip 0x19 --align blob_tegra194-a02-bpmp-p2888-a04_aligned.dtb [ 12.2632 ] [ 12.2660 ] tegrahost_v2 --chip 0x19 0 --magicid BPMD --appendsigheader blob_tegra194-a02-bpmp-p2888-a04_aligned.dtb zerosbk [ 12.2688 ] adding BCH for blob_tegra194-a02-bpmp-p2888-a04_aligned.dtb [ 12.3006 ] [ 12.3420 ] tegrasign_v3.py --key None --list blob_tegra194-a02-bpmp-p2888-a04_aligned_sigheader.dtb_list.xml [ 12.3423 ] Assuming zero filled SBK key [ 12.3150 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_tegra194-a02-bpmp-p2888-a04_aligned_sigheader.dtb.encrypt blob_tegra194-a02-bpmp-p2888-a04_aligned_sigheader.dtb.hash zerosbk [ 12.3383 ] [ 12.3426 ] tegrahost_v2 --chip 0x19 --align blob_spe_t194_aligned.bin [ 12.3445 ] [ 12.3471 ] tegrahost_v2 --chip 0x19 0 --magicid SPEF --appendsigheader blob_spe_t194_aligned.bin zerosbk [ 12.3486 ] adding BCH for blob_spe_t194_aligned.bin [ 12.3532 ] [ 12.3943 ] tegrasign_v3.py --key None --list blob_spe_t194_aligned_sigheader.bin_list.xml [ 12.3946 ] Assuming zero filled SBK key [ 12.3647 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_spe_t194_aligned_sigheader.bin.encrypt blob_spe_t194_aligned_sigheader.bin.hash zerosbk [ 12.3702 ] [ 12.3753 ] tegrahost_v2 --chip 0x19 --align blob_tos-optee_t194_aligned.img [ 12.3777 ] [ 12.3810 ] tegrahost_v2 --chip 0x19 0 --magicid TOSB --appendsigheader blob_tos-optee_t194_aligned.img zerosbk [ 12.3828 ] adding BCH for blob_tos-optee_t194_aligned.img [ 12.4041 ] [ 12.4447 ] tegrasign_v3.py --key None --list blob_tos-optee_t194_aligned_sigheader.img_list.xml [ 12.4450 ] Assuming zero filled SBK key [ 12.4145 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_tos-optee_t194_aligned_sigheader.img.encrypt blob_tos-optee_t194_aligned_sigheader.img.hash zerosbk [ 12.4268 ] [ 12.4310 ] tegrahost_v2 --chip 0x19 --align blob_eks_aligned.img [ 12.4326 ] [ 12.4354 ] tegrahost_v2 --chip 0x19 0 --magicid EKSB --appendsigheader blob_eks_aligned.img zerosbk [ 12.4369 ] adding BCH for blob_eks_aligned.img [ 12.4372 ] [ 12.4787 ] tegrasign_v3.py --key None --list blob_eks_aligned_sigheader.img_list.xml [ 12.4791 ] Assuming zero filled SBK key [ 12.4496 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_eks_aligned_sigheader.img.encrypt blob_eks_aligned_sigheader.img.hash zerosbk [ 12.4515 ] [ 12.4554 ] tegrahost_v2 --chip 0x19 --align blob_tegra194-p2888-0001-p2822-0000_aligned.dtb [ 12.4585 ] [ 12.4617 ] tegrahost_v2 --chip 0x19 0 --magicid CDTB --appendsigheader blob_tegra194-p2888-0001-p2822-0000_aligned.dtb zerosbk [ 12.4634 ] adding BCH for blob_tegra194-p2888-0001-p2822-0000_aligned.dtb [ 12.4787 ] [ 12.5194 ] tegrasign_v3.py --key None --list blob_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb_list.xml [ 12.5197 ] Assuming zero filled SBK key [ 12.4903 ] tegrahost_v2 --chip 0x19 0 --updatesigheader blob_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb.encrypt blob_tegra194-p2888-0001-p2822-0000_aligned_sigheader.dtb.hash zerosbk [ 12.5010 ] [ 12.5052 ] tegrahost_v2 --chip 0x19 --generateblob blob.xml blob.bin [ 12.5080 ] number of images in blob are 11 [ 12.5088 ] blobsize is 6870712 [ 12.5091 ] Added binary blob_nvtboot_recovery_cpu_t194_sigheader.bin.encrypt of size 238144 [ 12.5148 ] Added binary blob_nvtboot_recovery_t194_sigheader.bin.encrypt of size 173216 [ 12.5157 ] Added binary blob_preboot_c10_prod_cr_sigheader.bin.encrypt of size 24016 [ 12.5166 ] Added binary blob_mce_c10_prod_cr_sigheader.bin.encrypt of size 145184 [ 12.5172 ] Added binary blob_mts_c10_prod_cr_sigheader.bin.encrypt of size 3430416 [ 12.5200 ] Added binary blob_bpmp_t194_sigheader.bin.encrypt of size 856352 [ 12.5215 ] Added binary blob_tegra194-a02-bpmp-p2888-a04_sigheader.dtb.encrypt of size 993376 [ 12.5225 ] Added binary blob_spe_t194_sigheader.bin.encrypt of size 95232 [ 12.5230 ] Added binary blob_tos-optee_t194_sigheader.img.encrypt of size 525232 [ 12.5235 ] Added binary blob_eks_sigheader.img.encrypt of size 5136 [ 12.5239 ] Added binary blob_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt of size 384224 [ 12.5290 ] [ 12.5291 ] Sending bootloader and pre-requisite binaries [ 12.5318 ] tegrarcm_v2 --download blob blob.bin [ 12.5333 ] Applet version 01.00.0000 [ 12.6082 ] Sending blob [ 12.6086 ] [................................................] 100% [ 13.5710 ] [ 13.5768 ] tegrarcm_v2 --boot recovery [ 13.5795 ] Applet version 01.00.0000 [ 13.6557 ] [ 14.6631 ] tegrarcm_v2 --isapplet [ 15.4298 ] [ 15.4357 ] tegrarcm_v2 --ismb2 [ 15.5121 ] [ 15.5199 ] tegradevflash_v2 --iscpubl [ 15.5217 ] Bootloader version 01.00.0000 [ 15.5517 ] Bootloader version 01.00.0000 [ 15.5529 ] [ 15.5530 ] Retrieving storage infomation [ 15.5575 ] tegrarcm_v2 --oem platformdetails storage storage_info.bin [ 15.5595 ] Applet is not running on device. Continue with Bootloader [ 15.6485 ] [ 15.6538 ] tegradevflash_v2 --oem platformdetails storage storage_info.bin [ 15.6562 ] Bootloader version 01.00.0000 [ 15.6998 ] Saved platform info in storage_info.bin [ 15.7012 ] [ 15.7013 ] Flashing the device [ 15.7055 ] tegraparser_v2 --storageinfo storage_info.bin --generategpt --pt flash.xml.bin [ 15.7093 ] [ 15.7095 ] Start flashing [ 15.7131 ] tegradevflash_v2 --pt flash.xml.bin --create [ 15.7149 ] Bootloader version 01.00.0000 [ 15.7435 ] Erasing sdmmc_boot: 3 ......... [Done] [ 16.8035 ] Writing partition secondary_gpt with gpt_secondary_0_3.bin [ 16896 bytes ] [ 16.8059 ] [................................................] 100% [ 16.8075 ] Erasing sdmmc_user: 3 ......... [Done] [ 17.2554 ] Writing partition master_boot_record with mbr_1_3.bin [ 512 bytes ] [ 17.2576 ] [................................................] 100% [ 17.2591 ] Writing partition primary_gpt with gpt_primary_1_3.bin [ 16896 bytes ] [ 17.2606 ] [................................................] 100% [ 17.2623 ] Writing partition secondary_gpt with gpt_secondary_1_3.bin [ 16896 bytes ] [ 17.2634 ] [................................................] 100% [ 17.2651 ] Writing partition mb1 with mb1_t194_prod_aligned_sigheader.bin.encrypt [ 251376 bytes ] [ 17.2659 ] [................................................] 100% [ 17.2743 ] Writing partition mb1_b with mb1_t194_prod_aligned_sigheader.bin.encrypt [ 251376 bytes ] [ 17.2884 ] [................................................] 100% [ 17.2957 ] Writing partition spe-fw with spe_t194_sigheader.bin.encrypt [ 95232 bytes ] [ 17.3068 ] [................................................] 100% [ 17.3097 ] Writing partition mb2 with nvtboot_t194_sigheader.bin.encrypt [ 174672 bytes ] [ 17.3139 ] [................................................] 100% [ 17.3198 ] Writing partition mts-preboot with preboot_c10_prod_cr_sigheader.bin.encrypt [ 24016 bytes ] [ 17.3274 ] [................................................] 100% [ 17.3286 ] Writing partition spe-fw_b with spe_t194_sigheader.bin.encrypt [ 95232 bytes ] [ 17.3318 ] [................................................] 100% [ 17.3349 ] Writing partition mb2_b with nvtboot_t194_sigheader.bin.encrypt [ 174672 bytes ] [ 17.4164 ] [................................................] 100% [ 17.4217 ] Writing partition mts-preboot_b with preboot_c10_prod_cr_sigheader.bin.encrypt [ 24016 bytes ] [ 17.5127 ] [................................................] 100% [ 17.5137 ] Writing partition SMD with slot_metadata.bin [ 191 bytes ] [ 17.5161 ] [................................................] 100% [ 17.5186 ] Writing partition VER_b with emmc_bootblob_ver.txt [ 102 bytes ] [ 17.5985 ] [................................................] 100% [ 17.6006 ] Writing partition VER with emmc_bootblob_ver.txt [ 102 bytes ] [ 17.6028 ] [................................................] 100% [ 17.6048 ] Writing partition master_boot_record with mbr_1_3.bin [ 512 bytes ] [ 17.6056 ] [................................................] 100% [ 17.6063 ] Writing partition APP with system.img [ 5754303148 bytes ] [ 17.6068 ] [................................................] 100% [ 251.1220 ] Writing partition mts-mce with mce_c10_prod_cr_sigheader.bin.encrypt [ 145184 bytes ] [ 251.1362 ] [................................................] 100% [ 251.1410 ] Writing partition mts-proper with mts_c10_prod_cr_sigheader.bin.encrypt [ 3430416 bytes ] [ 251.1452 ] [................................................] 100% [ 251.2725 ] Writing partition cpu-bootloader with cboot_t194_sigheader.bin.encrypt [ 446560 bytes ] [ 251.2765 ] [................................................] 100% [ 251.2890 ] Writing partition bootloader-dtb with tegra194-p2888-0001-p2822-0000_with_odm_overlay_sigheader.dtb.encrypt [ 451200 bytes ] [ 251.2961 ] [................................................] 100% [ 251.3062 ] Writing partition secure-os with tos-optee_t194_sigheader.img.encrypt [ 525232 bytes ] [ 251.3126 ] [................................................] 100% [ 251.3286 ] Writing partition eks with eks_sigheader.img.encrypt [ 5136 bytes ] [ 251.3350 ] [................................................] 100% [ 251.3358 ] Writing partition bpmp-fw with bpmp_t194_sigheader.bin.encrypt [ 856352 bytes ] [ 251.3377 ] [................................................] 100% [ 251.3635 ] Writing partition bpmp-fw-dtb with tegra194-a02-bpmp-p2888-a04_sigheader.dtb.encrypt [ 993376 bytes ] [ 251.3726 ] [................................................] 100% [ 251.4005 ] Writing partition xusb-fw with xusb_sil_rel_fw_sigheader.encrypt [ 133120 bytes ] [ 251.4096 ] [................................................] 100% [ 251.4134 ] Writing partition adsp-fw with adsp-fw_sigheader.bin.encrypt [ 395232 bytes ] [ 251.4153 ] [................................................] 100% [ 251.4262 ] Writing partition sc7 with warmboot_t194_prod_sigheader.bin.encrypt [ 55264 bytes ] [ 251.4338 ] [................................................] 100% [ 251.4348 ] Writing partition kernel with boot_sigheader.img.encrypt [ 41969664 bytes ] [ 251.4361 ] [................................................] 100% [ 253.0816 ] Writing partition kernel-dtb with kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt [ 384224 bytes ] [ 253.0836 ] [................................................] 100% [ 253.0933 ] Writing partition mts-mce_b with mce_c10_prod_cr_sigheader.bin.encrypt [ 145184 bytes ] [ 253.0994 ] [................................................] 100% [ 253.1039 ] Writing partition mts-proper_b with mts_c10_prod_cr_sigheader.bin.encrypt [ 3430416 bytes ] [ 253.1068 ] [................................................] 100% [ 253.2678 ] Writing partition cpu-bootloader_b with cboot_t194_sigheader.bin.encrypt [ 446560 bytes ] [ 253.2725 ] [................................................] 100% [ 253.2859 ] Writing partition bootloader-dtb_b with tegra194-p2888-0001-p2822-0000_with_odm_overlay_sigheader.dtb.encrypt [ 451200 bytes ] [ 253.2928 ] [................................................] 100% [ 253.3032 ] Writing partition secure-os_b with tos-optee_t194_sigheader.img.encrypt [ 525232 bytes ] [ 253.3087 ] [................................................] 100% [ 253.3227 ] Writing partition eks_b with eks_sigheader.img.encrypt [ 5136 bytes ] [ 253.3280 ] [................................................] 100% [ 253.3296 ] Writing partition bpmp-fw_b with bpmp_t194_sigheader.bin.encrypt [ 856352 bytes ] [ 253.3310 ] [................................................] 100% [ 253.3557 ] Writing partition bpmp-fw-dtb_b with tegra194-a02-bpmp-p2888-a04_sigheader.dtb.encrypt [ 993376 bytes ] [ 253.3656 ] [................................................] 100% [ 253.3921 ] Writing partition xusb-fw_b with xusb_sil_rel_fw_sigheader.encrypt [ 133120 bytes ] [ 253.4020 ] [................................................] 100% [ 253.4060 ] Writing partition adsp-fw_b with adsp-fw_sigheader.bin.encrypt [ 395232 bytes ] [ 253.4078 ] [................................................] 100% [ 253.4211 ] Writing partition sc7_b with warmboot_t194_prod_sigheader.bin.encrypt [ 55264 bytes ] [ 253.4255 ] [................................................] 100% [ 253.4272 ] Writing partition kernel_b with boot_sigheader.img.encrypt [ 41969664 bytes ] [ 253.4295 ] [................................................] 100% [ 255.0903 ] Writing partition kernel-dtb_b with kernel_tegra194-p2888-0001-p2822-0000_sigheader.dtb.encrypt [ 384224 bytes ] [ 255.0924 ] [................................................] 100% [ 255.1020 ] Writing partition recovery with recovery_sigheader.img.encrypt [ 45621248 bytes ] [ 255.1082 ] [................................................] 100% [ 256.9269 ] Writing partition recovery-dtb with tegra194-p2888-0001-p2822-0000.dtb_sigheader.rec.encrypt [ 384224 bytes ] [ 256.9350 ] [................................................] 100% [ 256.9485 ] [ 256.9527 ] tegradevflash_v2 --write BCT br_bct_BR.bct [ 256.9546 ] Bootloader version 01.00.0000 [ 256.9837 ] Writing partition BCT with br_bct_BR.bct [ 2888 bytes ] [ 256.9851 ] [................................................] 100% [ 257.0767 ] [ 257.0882 ] tegradevflash_v2 --write MB1_BCT mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 257.0902 ] Bootloader version 01.00.0000 [ 257.1193 ] Writing partition MB1_BCT with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 31024 bytes ] [ 257.1216 ] [................................................] 100% [ 257.1255 ] [ 257.1290 ] tegradevflash_v2 --write MB1_BCT_b mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 257.1308 ] Bootloader version 01.00.0000 [ 257.1600 ] Writing partition MB1_BCT_b with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 31024 bytes ] [ 257.1637 ] [................................................] 100% [ 257.2436 ] [ 257.2542 ] tegradevflash_v2 --write MEM_BCT mem_coldboot_sigheader.bct.encrypt [ 257.2562 ] Bootloader version 01.00.0000 [ 257.2832 ] Writing partition MEM_BCT with mem_coldboot_sigheader.bct.encrypt [ 198656 bytes ] [ 257.2847 ] [................................................] 100% [ 257.3770 ] [ 257.3828 ] tegradevflash_v2 --write MEM_BCT_b mem_coldboot_sigheader.bct.encrypt [ 257.3850 ] Bootloader version 01.00.0000 [ 257.4153 ] Writing partition MEM_BCT_b with mem_coldboot_sigheader.bct.encrypt [ 198656 bytes ] [ 257.4171 ] [................................................] 100% [ 257.4317 ] [ 257.4318 ] Flashing completed [ 257.4319 ] Coldbooting the device [ 257.4397 ] tegrarcm_v2 --ismb2 [ 257.5158 ] [ 257.5219 ] tegradevflash_v2 --reboot coldboot [ 257.5253 ] Bootloader version 01.00.0000 [ 257.5565 ] *** The target t186ref has been flashed successfully. *** Reset the board to boot from internal eMMC. 2022年 05月 13日 星期五 11:45:31 CST