nvidia@nvidia-desktop:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (hm@hm) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Apr 18 16:23:18 IST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1004541 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29792(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3147980K/4018164K available (15358K kernel code, 2956K rwdata, 6628K rodata, 8640K init, 612K bss, 116520K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009600000 ( 6656 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e70000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a153008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a153008 - 0xffffff800a1ec0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000946] Console: colour dummy device 80x25 [ 0.000951] console [tty0] enabled [ 0.000954] bootconsole [uart8250] disabled [ 0.000962] kmemleak: Kernel memory leak detector disabled [ 0.000973] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000980] pid_max: default: 32768 minimum: 301 [ 0.001284] Security Framework initialized [ 0.001438] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001442] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002011] ftrace: allocating 47100 entries in 184 pages [ 0.125515] sched-energy: Sched-energy-costs installed from DT [ 0.125525] ASID allocator initialised with 65536 entries [ 0.160752] tegra-id: chipid=21817. [ 0.160758] tegra-id: opt_subrevision=1. [ 0.160777] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.160785] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.160790] DTB Build time: [ 0.210671] CPU1: Booted secondary processor [4e0f0030] [ 0.242037] CPU2: Booted secondary processor [4e0f0030] [ 0.273054] CPU3: Booted secondary processor [411fd073] [ 0.305013] CPU4: Booted secondary processor [411fd073] [ 0.337011] CPU5: Booted secondary processor [411fd073] [ 0.337066] Brought up 6 CPUs [ 0.337070] SMP: Total of 6 processors activated. [ 0.337075] CPU features: detected feature: 32-bit EL0 Support [ 0.339235] CPU: All CPU(s) started at EL2 [ 0.339368] alternatives: patching kernel code [ 0.341761] devtmpfs: initialized [ 0.364096] Initilizing CustomIPI irq domain [ 0.364243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.364251] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.372903] pinctrl core: initialized pinctrl subsystem [ 0.373172] OS set in device tree is not L4T. [ 0.373343] regulator-dummy: no parameters [ 0.373482] Initializing plugin-manager [ 0.373539] Plugin module not found [ 0.373574] Plugin-manager status disabled [ 0.374647] NET: Registered protocol family 16 [ 0.375615] pstore: using zlib compression [ 0.375629] console [pstore-1] enabled [ 0.375631] pstore: Registered ramoops as persistent store backend [ 0.375635] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.389069] cpuidle: using governor menu [ 0.389952] bpmp: waiting for handshake [ 0.389956] bpmp: handshake completed [ 0.389975] bpmp: synchronizing channels [ 0.389982] bpmp: channels synchronized [ 0.389986] bpmp: mail init ok [ 0.391407] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.391412] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.391416] arm-smmu 12000000.iommu: stage 1 translation [ 0.391420] arm-smmu 12000000.iommu: stage 2 translation [ 0.391423] arm-smmu 12000000.iommu: nested translation [ 0.391429] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.391435] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.391439] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.391443] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.391447] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.393245] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e74000) [ 0.393259] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.396512] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.397476] Registering BPMP clocks... [ 0.397548] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.397999] Serial: AMBA PL011 UART driver [ 0.398903] tegra_powergate_init: DONE [ 0.398910] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01.dts [ 0.398914] DTB Build time: [ 0.400184] Tegra reboot handler registered. [ 0.401359] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.401420] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.401433] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.401436] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.401439] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.401595] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.401605] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.401878] iommu: Adding device 3460000.sdhci to group 0 [ 0.403026] iommu: Adding device 3160000.i2c to group 1 [ 0.403417] iommu: Adding device c240000.i2c to group 2 [ 0.403712] iommu: Adding device 3180000.i2c to group 3 [ 0.403997] iommu: Adding device 3190000.i2c to group 4 [ 0.404372] iommu: Adding device 31b0000.i2c to group 5 [ 0.404676] iommu: Adding device 31c0000.i2c to group 6 [ 0.404963] iommu: Adding device c250000.i2c to group 7 [ 0.405298] iommu: Adding device 31e0000.i2c to group 8 [ 0.406755] iommu: Adding device 3210000.spi to group 9 [ 0.407045] iommu: Adding device c260000.spi to group 10 [ 0.407680] iommu: Adding device 3100000.serial to group 11 [ 0.407969] iommu: Adding device 3110000.serial to group 12 [ 0.408253] iommu: Adding device c280000.serial to group 13 [ 0.408580] iommu: Adding device 3130000.serial to group 14 [ 0.409729] iommu: Adding device 2490000.ether_qos to group 15 [ 0.409741] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.410549] iommu: Adding device b000000.rtcpu to group 16 [ 0.412259] iommu: Adding device 13e10000.host1x to group 17 [ 0.412546] iommu: Adding device 13e10000.host1x:ctx0 to group 18 [ 0.412818] iommu: Adding device 13e10000.host1x:ctx1 to group 19 [ 0.413110] iommu: Adding device 13e10000.host1x:ctx2 to group 20 [ 0.413394] iommu: Adding device 13e10000.host1x:ctx3 to group 21 [ 0.413673] iommu: Adding device 13e10000.host1x:ctx4 to group 22 [ 0.413944] iommu: Adding device 13e10000.host1x:ctx5 to group 23 [ 0.414225] iommu: Adding device 13e10000.host1x:ctx6 to group 24 [ 0.414498] iommu: Adding device 13e10000.host1x:ctx7 to group 25 [ 0.414906] iommu: Adding device 150c0000.nvcsi to group 26 [ 0.415448] iommu: Adding device 15700000.vi to group 27 [ 0.415754] iommu: Adding device 15600000.isp to group 28 [ 0.415953] iommu: Adding device 15200000.dc_common to group 29 [ 0.415995] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x800000) [ 0.416035] platform 15200000.dc_common: OF IOVA linear map 0x96081000 size (0x2008) [ 0.416484] iommu: Adding device 15200000.nvdisplay to group 30 [ 0.416800] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.417132] iommu: Adding device 15340000.vic to group 32 [ 0.417333] iommu: Adding device 154c0000.nvenc to group 33 [ 0.417525] iommu: Adding device 15480000.nvdec to group 34 [ 0.417836] iommu: Adding device 15380000.nvjpg to group 35 [ 0.418033] iommu: Adding device 15500000.tsec to group 36 [ 0.418224] iommu: Adding device 15100000.tsecb to group 37 [ 0.419098] iommu: Adding device 15810000.se to group 38 [ 0.419292] iommu: Adding device 15820000.se to group 39 [ 0.419484] iommu: Adding device 15830000.se to group 40 [ 0.419676] iommu: Adding device 15840000.se to group 41 [ 0.420442] iommu: Adding device smmu_test to group 42 [ 0.420997] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c10000 [ 0.421026] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.421037] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.421047] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c40000 [ 0.421056] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c50000 [ 0.421064] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.421074] mc-err: mcerr ops are set to t18x [ 0.421224] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.421988] iommu: Adding device 3530000.xhci to group 43 [ 0.422003] arm-smmu: forcing sodev map for 3530000.xhci [ 0.422394] iommu: Adding device 3550000.xudc to group 44 [ 0.422405] arm-smmu: forcing sodev map for 3550000.xudc [ 0.422903] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.422910] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.422915] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.423489] iommu: Adding device 17000000.gp10b to group 45 [ 0.424398] tegra-reset 5000000.clock: registered 193 resets. [ 0.426306] iommu: Adding device d000000.bpmp to group 46 [ 0.426513] bpmp: ping status is 0 [ 0.426588] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.428231] bpmp d000000.bpmp: probe ok [ 0.430806] iommu: Adding device 2600000.dma to group 47 [ 0.431608] GPIO line 424 (camera-control-output-low) hogged as output/low [ 0.431640] GPIO line 427 (camera-control-output-low) hogged as output/low [ 0.431685] GPIO line 408 (w-disable1) hogged as output/high [ 0.431720] GPIO line 410 (w-disable2) hogged as output/high [ 0.431883] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.435715] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.437305] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.437321] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.437627] iommu: Adding device sound to group 49 [ 0.437936] iommu: Adding device 3510000.hda to group 50 [ 0.444358] iommu: Adding device c1a0000.aon to group 51 [ 0.444873] vdd-1v8-ap: 1800 mV [ 0.445102] vdd-ac-bat: 5000 mV [ 0.445288] vdd-3v3-disp-cvb: 3300 mV [ 0.445560] vdd-3v3-cvb: 3300 mV [ 0.445741] vdd-1v8-cvb: 1800 mV [ 0.445935] vdd-fan: 5000 mV [ 0.446132] vdd-hdmi-5v0: 5000 mV [ 0.446319] vdd_sys_en: 1200 mV [ 0.469442] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.471912] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.472109] SCSI subsystem initialized [ 0.472206] libata version 3.00 loaded. [ 0.472346] usbcore: registered new interface driver usbfs [ 0.472378] usbcore: registered new interface driver hub [ 0.472408] usbcore: registered new device driver usb [ 0.475398] random: fast init done [ 0.482200] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.485196] vddio-ddr: at 1125 mV [ 0.489064] avdd_dsi_csi: 1200 mV [ 0.493064] vdd-1v8: 1800 mV [ 0.497026] vdd-3v3-sys: 3300 mV [ 0.497898] spmic-ldo0: at 1800 mV [ 0.498540] spmic-ldo1: at 800 mV [ 0.501028] vddio-3v3: 3300 mV [ 0.501679] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.505027] vdd-rtc: at 800 mV [ 0.505694] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.509025] spmic-ldo6: at 800 mV [ 0.513026] vdd-pex-1v00: 1000 mV [ 0.513611] dvdd-pex: 1000 mV [ 0.515579] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.515707] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.515861] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.516038] max77620 4-003c: max77620 probe successful [ 0.516404] media: Linux media interface: v0.10 [ 0.516433] Linux video capture interface: v2.00 [ 0.518657] pps_core: LinuxPPS API ver. 1 registered [ 0.518661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.518675] PTP clock support registered [ 0.518861] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.519037] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.519062] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.520120] trusty trusty: trusty version: Built: 08:57:14 Feb 19 2022 [ 0.520134] trusty trusty: selected api version: 3 (requested 3) [ 0.520873] Advanced Linux Sound Architecture Driver Initialized. [ 0.521215] Bluetooth: Core ver 2.22 [ 0.521241] NET: Registered protocol family 31 [ 0.521243] Bluetooth: HCI device and connection manager initialized [ 0.521250] Bluetooth: HCI socket layer initialized [ 0.521255] Bluetooth: L2CAP socket layer initialized [ 0.521268] Bluetooth: SCO socket layer initialized [ 0.521827] vdd-sys-bl: 3300 mV [ 0.523335] camchar: rtcpu character device driver loaded [ 0.523788] gpio tegra-gpio wake61 for gpio=92(L:4) [ 0.523861] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.524770] clocksource: Switched to clocksource arch_sys_counter [ 0.547271] VFS: Disk quotas dquot_6.6.0 [ 0.547344] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.547593] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.548028] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.548137] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.548142] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.548149] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.548153] nvmap_page_pool_init: Total RAM pages: 975411 [ 0.548157] nvmap_page_pool_init: nvmap page pool size: 121926 pages (476 MB) [ 0.548217] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.548687] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.550684] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.556515] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.556704] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.557081] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.557159] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.557296] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.557508] la/ptsa driver initialized. [ 0.557517] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.557520] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 0.557812] NET: Registered protocol family 2 [ 0.557875] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.559412] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.559570] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.559873] TCP: Hash tables configured (established 32768 bind 32768) [ 0.559921] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.559982] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.560247] NET: Registered protocol family 1 [ 0.560553] RPC: Registered named UNIX socket transport module. [ 0.560555] RPC: Registered udp transport module. [ 0.560558] RPC: Registered tcp transport module. [ 0.560560] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.560565] PCI: CLS 0 bytes, default 64 [ 0.560678] Trying to unpack rootfs image as initramfs... [ 0.769617] Freeing initrd memory: 7068K [ 0.784074] host1x 13e10000.host1x: initialized [ 0.785373] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.787484] audit: initializing netlink subsys (disabled) [ 0.787509] audit: type=2000 audit(0.676:1): initialized [ 0.787903] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.794315] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.795257] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.795755] 9p: Installing v9fs 9p2000 file system support [ 0.797855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.797913] io scheduler noop registered [ 0.798121] io scheduler cfq registered (default) [ 0.800977] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.863418] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 0.884117] iommu: Adding device 2993000.adsp to group 53 [ 0.884657] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.889565] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.890473] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.891309] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.892095] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.894154] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.894863] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.895145] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.895337] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.895446] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.897143] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.897438] tsec 15500000.tsec: initialized [ 0.898303] tsec 15100000.tsecb: initialized [ 0.900382] nvdec 15480000.nvdec: initialized [ 0.904021] falcon 15340000.vic: initialized [ 0.905113] falcon 154c0000.nvenc: initialized [ 0.906117] falcon 15380000.nvjpg: initialized [ 0.907968] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.909462] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.910928] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.912399] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.913933] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.915450] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.916929] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.918392] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.920962] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.920969] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.920995] tegradccommon 15200000.dc_common: dma mapping done [ 0.921630] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 0.921665] generic_infoframe_type: 0x87 [ 0.921734] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.921756] tegradc 15200000.nvdisplay: Display dc.ffffff800b4a0000 registered with id=0 [ 0.927448] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.927451] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.927454] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.927632] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.927638] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.928573] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.930543] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.930547] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.932758] tegradc 15200000.nvdisplay: probed [ 0.933742] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.934289] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.934310] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.934770] kfuse 3830000.kfuse: initialized [ 0.935943] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.939354] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.941538] console [ttyS0] disabled [ 0.941574] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 0.941612] console [ttyS0] enabled [ 0.942727] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 0.943428] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 0.943606] serial-tegra 3130000.serial: RX in PIO mode [ 0.944228] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 0.944246] Console: switching to colour frame buffer device 240x67 [ 0.944335] tegradc 15200000.nvdisplay: fb registered [ 0.944475] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.944886] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 0.944938] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 0.945315] [drm] Initialized [ 0.945997] Parent Clock set for DC plld2 [ 0.952436] brd: module loaded [ 0.956141] loop: module loaded [ 0.956187] tegra_profiler: version: 1.145, samples/io: 49/28 [ 0.956266] tegra_profiler: auth: init [ 0.956889] THERMAL EST: found 3 subdevs [ 0.956893] THERMAL EST num_resources: 0 [ 0.956897] [THERMAL EST subdev 0] [ 0.956902] [THERMAL EST subdev 1] [ 0.956905] [THERMAL EST subdev 2] [ 0.956913] THERMAL EST: Found 2 profiles, default profile is quiet [ 0.957168] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 0.957171] THERMAL EST: thz register success. [ 0.957258] THERMAL EST: end of probe, return err: 0 [ 0.957857] sd: No Scsi addr parsed to reserve index [ 0.957880] hisi_sas: driver version v1.6 [ 0.962509] libphy: Fixed MDIO Bus: probed [ 0.962937] tun: Universal TUN/TAP device driver, 1.6 [ 0.962940] tun: (C) 1999-2004 Max Krasnyansky [ 0.963510] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.963513] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.963545] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.963547] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.963578] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.963580] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.963611] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 0.963613] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.006539] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.006981] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.006991] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.032979] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.032983] Extcon AUX1(HDMI) enable [ 1.033367] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.033480] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.033503] tegradc 15210000.nvdisplay: Display dc.ffffff800b7b0000 registered with id=1 [ 1.033688] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.033694] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.041566] tegradc 15210000.nvdisplay: probed [ 1.041740] tegradc 15210000.nvdisplay: fb registered [ 1.044928] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.044931] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.044939] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.044946] tegradc 15210000.nvdisplay: blank - powerdown [ 1.044955] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.044958] Extcon DP: HPD disabled [ 1.044960] hpd: hpd_switch 0 [ 1.044963] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.044970] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.044976] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.168455] tegradc 15200000.nvdisplay: blank - powerdown [ 1.204828] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.206663] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.206862] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.206864] Extcon AUX1(HDMI) disable [ 1.207087] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 43 9a [ 1.207112] Using phyrst_lpmode = 1 from DT [ 1.207183] libphy: dwc_phy: probed [ 1.209144] PPP generic driver version 2.4.2 [ 1.209412] PPP BSD Compression module registered [ 1.209415] PPP Deflate Compression module registered [ 1.209428] PPP MPPE Compression module registered [ 1.209431] NET: Registered protocol family 24 [ 1.209468] usbcore: registered new interface driver r8152 [ 1.209494] usbcore: registered new interface driver asix [ 1.209519] usbcore: registered new interface driver ax88179_178a [ 1.209544] usbcore: registered new interface driver cdc_ether [ 1.209566] usbcore: registered new interface driver net1080 [ 1.209587] usbcore: registered new interface driver cdc_subset [ 1.209607] usbcore: registered new interface driver zaurus [ 1.209636] usbcore: registered new interface driver cdc_ncm [ 1.209829] VFIO - User Level meta-driver version: 0.3 [ 1.210685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.210697] ehci-pci: EHCI PCI platform driver [ 1.210728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.210734] ohci-pci: OHCI PCI platform driver [ 1.210765] ohci-platform: OHCI generic platform driver [ 1.214220] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.215652] tegra-xusb 3530000.xhci: extcon 0: ffffffc0ef9f6400 id [ 1.216006] usbcore: registered new interface driver uas [ 1.216045] usbcore: registered new interface driver usb-storage [ 1.216105] usbcore: registered new interface driver usbserial [ 1.218269] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.218291] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.218306] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.219025] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.219052] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 1.219191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.219195] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.219198] usb usb1: Product: xHCI Host Controller [ 1.219200] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.219203] usb usb1: SerialNumber: 3530000.xhci [ 1.219554] hub 1-0:1.0: USB hub found [ 1.219582] hub 1-0:1.0: 4 ports detected [ 1.219966] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.219973] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.220098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.220102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.220105] usb usb2: Product: xHCI Host Controller [ 1.220108] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.220110] usb usb2: SerialNumber: 3530000.xhci [ 1.220398] hub 2-0:1.0: USB hub found [ 1.220422] hub 2-0:1.0: 3 ports detected [ 1.220896] Wake76 for irq=199 [ 1.220897] Wake77 for irq=199 [ 1.220899] Wake78 for irq=199 [ 1.220900] Wake79 for irq=199 [ 1.220901] Wake80 for irq=199 [ 1.220902] Wake81 for irq=199 [ 1.220903] Wake82 for irq=199 [ 1.220928] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.220932] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.226494] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.228509] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 1.228516] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.228524] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.231690] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.232419] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.232698] mousedev: PS/2 mouse device common for all mice [ 1.232869] usbcore: registered new interface driver xpad [ 1.233748] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.320754] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.321162] usb usb2: usb_suspend_both: status 0 [ 1.326115] tegradc 15200000.nvdisplay: unblank [ 1.327288] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.327455] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.331318] Parent Clock set for DC plld2 [ 1.338220] tegradc 15200000.nvdisplay: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m [ 1.339601] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.341288] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.342364] Wake73 for irq=42 [ 1.343599] rtc rtc1: alarm rtc device [ 1.343610] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.343623] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.343830] i2c /dev entries driver [ 1.345598] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.345916] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.345919] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.346420] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.369767] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.369805] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.369866] imx219 9-0010: board setup failed [ 1.369907] imx219: probe of 9-0010 failed with error -121 [ 1.370200] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.393396] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.393432] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.393480] imx219 10-0010: board setup failed [ 1.393513] imx219: probe of 10-0010 failed with error -121 [ 1.394283] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.398412] parse_throttle_dt_data: Num cap clks = 4 [ 1.398415] parse_throttle_dt_data: clk=mcpu type=1 [ 1.398418] parse_throttle_dt_data: clk=bcpu type=2 [ 1.398424] parse_throttle_dt_data: clk=gpu type=4 [ 1.398426] parse_throttle_dt_data: clk=emc type=3 [ 1.399057] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.399522] FAN dev name: pwm-fan [ 1.399574] FAN:gpio request success. [ 1.399582] FAN: can't find tach_gpio [ 1.399589] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.399612] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.399776] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.399780] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.400273] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.400277] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 1.400281] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 1.400284] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 1.400287] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.400290] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.400292] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.400295] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.400298] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.400301] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.400819] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.401735] device-mapper: uevent: version 1.0.3 [ 1.402052] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.402293] CPU EMC frequency mapping table: from device tree [ 1.404256] cpufreq: platform driver Initialization: pass [ 1.404800] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.404917] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.405693] sdhci: Secure Digital Host Controller Interface driver [ 1.405695] sdhci: Copyright(c) Pierre Ossman [ 1.405696] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.406643] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.408200] CMDQ: cmdq_platfm_init successful [ 1.408590] sdhci-tegra: probe of 3440000.sdhci failed with error -16 [ 1.409084] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.409086] CQE: CMD_TIMING bit set for R1B DCMD [ 1.409087] Extcon AUX1(HDMI) enable [ 1.413946] tegra-se-nvhost 15810000.se: initialized [ 1.414989] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.415433] tegra-se-nvhost 15820000.se: initialized [ 1.416348] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.416842] tegra-se-nvhost 15830000.se: initialized [ 1.417636] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.418052] tegra-se-nvhost 15840000.se: initialized [ 1.418938] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.419628] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.419806] hidraw: raw HID events driver (C) Jiri Kosina [ 1.421214] usbcore: registered new interface driver usbhid [ 1.421215] usbhid: USB HID core driver [ 1.423068] tegradc 15200000.nvdisplay: sync windows ret = 247 [ 1.425925] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.427593] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.427835] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.427984] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 1.428908] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 1.428979] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 1.429034] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 1.429084] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 1.429185] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 1.429490] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (49) [ 1.429492] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.429972] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.431614] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.432002] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.432406] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.432742] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.433489] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433492] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 1.433494] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.433540] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433542] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 1.433544] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.433589] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433590] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 1.433592] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.433634] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433636] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 1.433637] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.433678] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433680] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 1.433682] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.433722] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433727] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 1.433728] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.433770] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433775] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 1.433776] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.433824] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433828] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 1.433830] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.433872] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433877] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 1.433878] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.433919] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433921] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 1.433923] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.433965] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.433969] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 1.433971] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.434010] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.434015] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 1.434016] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.434057] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.434062] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 1.434063] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.434103] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.434108] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 1.434110] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.434150] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.434154] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 1.434156] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.434205] **** A57 ECC: Enabled [ 1.434206] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 1.434266] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.434642] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.435026] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.435135] denver_knobs_init:MTS_VERSION:55941701 [ 1.436786] nvpmodel: initialized successfully [ 1.437542] trusty-virtio trusty:virtio: initializing [ 1.437636] trusty_ipc virtio0: vring0: va(pa) ffffffc0eb3f4000(0) qsz 32 notifyid 1 [ 1.437642] trusty_ipc virtio0: vring1: va(pa) ffffffc0eb3f6000(0) qsz 32 notifyid 2 [ 1.437707] trusty-virtio trusty:virtio: initializing done [ 1.437803] trusty_ipc virtio0: is online [ 1.438705] usbcore: registered new interface driver snd-usb-audio [ 1.452829] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.452975] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.453095] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.490423] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.490431] Extcon HDMI: HPD enabled [ 1.490460] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.500108] OPE platform probe [ 1.500174] OPE platform probe successful [ 1.507409] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.522297] mmc0: periodic cache flush enabled [ 1.522309] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.522644] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.522752] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.522848] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.522934] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.527283] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.544741] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.551117] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.551197] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.551263] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.551333] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.551404] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.551473] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.551539] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.551609] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.551676] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.551743] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.551812] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.551878] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.551948] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.552013] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.552085] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.552158] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.552226] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.552295] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.552363] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.552433] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.565047] usb 1-2: New USB device found, idVendor=0424, idProduct=2514 [ 1.565052] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.565703] hub 1-2:1.0: USB hub found [ 1.565760] hub 1-2:1.0: 4 ports detected [ 1.572058] u32 classifier [ 1.572061] Actions configured [ 1.572120] Initializing XFRM netlink socket [ 1.572686] NET: Registered protocol family 10 [ 1.573299] NET: Registered protocol family 17 [ 1.573309] NET: Registered protocol family 15 [ 1.573365] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.573408] Bluetooth: RFCOMM socket layer initialized [ 1.573416] Bluetooth: RFCOMM ver 1.11 [ 1.573420] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.573424] Bluetooth: HIDP socket layer initialized [ 1.573438] 9pnet: Installing 9P2000 support [ 1.573471] Key type dns_resolver registered [ 1.573744] Registered cp15_barrier emulation handler [ 1.573758] Registered setend emulation handler [ 1.574573] registered taskstats version 1 [ 1.577096] isp 15600000.isp: initialized [ 1.580179] nvcsi 150c0000.nvcsi: initialized [ 1.581074] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.583549] Wake83 for irq=51 [ 1.583630] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.583762] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.584937] tegra-vi4 15700000.vi: initialized [ 1.585748] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 1.585827] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.613368] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:09 UTC (946688409) [ 1.614119] mmcblk mmc0:0001: Card claimed for testing. [ 1.631544] bpmp: mounted debugfs mirror [ 1.632369] bwmgr: missing cdev-type property [ 1.636273] ALSA device list: [ 1.636277] #0: tegra-hda at 0x3518000 irq 382 [ 1.636279] #1: tegra-snd-t186ref-mobile-rt565x [ 1.638793] Freeing unused kernel memory: 8640K [ 1.660515] Root device found: mmcblk0p1 [ 1.661632] Found dev node: /dev/mmcblk0p1 [ 1.680043] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.681869] Rootfs mounted over mmcblk0p1 [ 1.685079] usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb [ 1.704835] Switching from initrd to actual rootfs [ 1.705304] usb 2-2: New USB device found, idVendor=0424, idProduct=5734 [ 1.705308] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 1.705311] usb 2-2: Product: USB5734 [ 1.705313] usb 2-2: Manufacturer: Microchip Tech [ 1.707359] hub 2-2:1.0: USB hub found [ 1.707725] hub 2-2:1.0: 4 ports detected [ 1.736737] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.797773] systemd[1]: System time before build time, advancing clock. [ 1.821276] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.824743] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 1.830269] cgroup: cgroup2: unknown option "nsdelegate" [ 1.845165] usb 1-3: not running at top speed; connect to a high speed hub [ 1.846089] usb 1-3: New USB device found, idVendor=14cd, idProduct=8601 [ 1.846093] usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 1.846096] usb 1-3: Product: USB 2.0 Hub [ 1.846098] usb 1-3: Manufacturer: USB Device [ 1.846798] hub 1-3:1.0: USB hub found [ 1.846935] hub 1-3:1.0: 4 ports detected [ 1.848863] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.849585] systemd[1]: Detected architecture arm64. [ 1.864738] usb 2-2: usb_suspend_both: status 0 [ 1.864930] usb usb2: usb_suspend_both: status 0 [ 1.867545] systemd[1]: Set hostname to . [ 1.924745] usb 1-2.1: new full-speed USB device number 4 using tegra-xusb [ 1.946620] usb 1-2.1: New USB device found, idVendor=8087, idProduct=0a2b [ 1.946626] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.947825] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.947833] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.032749] usb 1-2.2: new high-speed USB device number 5 using tegra-xusb [ 2.054777] usb 1-2.2: New USB device found, idVendor=196d, idProduct=0201 [ 2.054781] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.054784] usb 1-2.2: Product: MiniDOM-U 2ME [ 2.054786] usb 1-2.2: Manufacturer: InnoDisk [ 2.054788] usb 1-2.2: SerialNumber: 20141120A70000000001 [ 2.055489] usb-storage 1-2.2:1.0: USB Mass Storage device detected [ 2.055644] scsi host0: usb-storage 1-2.2:1.0 [ 2.057577] random: systemd: uninitialized urandom read (16 bytes read) [ 2.057609] systemd[1]: Reached target User and Group Name Lookups. [ 2.057811] random: systemd: uninitialized urandom read (16 bytes read) [ 2.059184] systemd[1]: Created slice System Slice. [ 2.059255] random: systemd: uninitialized urandom read (16 bytes read) [ 2.059472] systemd[1]: Listening on Journal Socket. [ 2.061530] systemd[1]: Mounting POSIX Message Queue File System... [ 2.064495] systemd[1]: Mounting Huge Pages File System... [ 2.099727] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.132780] usb 1-3.1: new low-speed USB device number 6 using tegra-xusb [ 2.157726] usb 1-3.1: New USB device found, idVendor=03f0, idProduct=094a [ 2.157732] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.157735] usb 1-3.1: Product: HP USB Optical Mouse [ 2.157737] usb 1-3.1: Manufacturer: PixArt [ 2.158778] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.160797] input: PixArt HP USB Optical Mouse as /devices/3530000.xhci/usb1/1-3/1-3.1/1-3.1:1.0/0003:03F0:094A.0001/input/input3 [ 2.160859] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.161170] hid-generic 0003:03F0:094A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-3530000.xhci-3.1/input0 [ 2.236766] usb 1-2.3: new high-speed USB device number 7 using tegra-xusb [ 2.257680] usb 1-2.3: New USB device found, idVendor=0424, idProduct=2734 [ 2.257687] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.257689] usb 1-2.3: Product: USB2734 [ 2.257692] usb 1-2.3: Manufacturer: Microchip Tech [ 2.258435] hub 1-2.3:1.0: USB hub found [ 2.258516] hub 1-2.3:1.0: 5 ports detected [ 2.266669] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.266676] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.266679] pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff] [ 2.266682] pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref] [ 2.266685] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.266716] pci 0000:00:03.0: [10de:10e6] type 01 class 0x060400 [ 2.266829] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.267008] iommu: Adding device 0000:00:03.0 to group 54 [ 2.267015] arm-smmu: forcing sodev map for 0000:00:03.0 [ 2.267099] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.267271] pci 0000:01:00.0: [12d8:b404] type 01 class 0x060400 [ 2.267648] pci 0000:01:00.0: supports D1 D2 [ 2.267650] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.267903] iommu: Adding device 0000:01:00.0 to group 55 [ 2.267908] arm-smmu: forcing sodev map for 0000:01:00.0 [ 2.276874] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.277153] pci 0000:02:01.0: [12d8:b404] type 01 class 0x060400 [ 2.277544] pci 0000:02:01.0: supports D1 D2 [ 2.277548] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.277865] iommu: Adding device 0000:02:01.0 to group 56 [ 2.277873] arm-smmu: forcing sodev map for 0000:02:01.0 [ 2.278003] pci 0000:02:02.0: [12d8:b404] type 01 class 0x060400 [ 2.278388] pci 0000:02:02.0: supports D1 D2 [ 2.278390] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.278643] iommu: Adding device 0000:02:02.0 to group 57 [ 2.278648] arm-smmu: forcing sodev map for 0000:02:02.0 [ 2.278769] pci 0000:02:03.0: [12d8:b404] type 01 class 0x060400 [ 2.279152] pci 0000:02:03.0: supports D1 D2 [ 2.279154] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.279400] iommu: Adding device 0000:02:03.0 to group 58 [ 2.279404] arm-smmu: forcing sodev map for 0000:02:03.0 [ 2.279586] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.279611] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.279633] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.279832] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 [ 2.280054] pci 0000:04:00.0: [8086:24fd] type 00 class 0x028000 [ 2.280136] pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.280563] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 2.280867] iommu: Adding device 0000:04:00.0 to group 59 [ 2.280874] arm-smmu: forcing sodev map for 0000:04:00.0 [ 2.281261] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04 [ 2.281505] pci 0000:05:00.0: [8086:1533] type 00 class 0x020000 [ 2.281561] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 2.281613] pci 0000:05:00.0: reg 0x18: [io 0x0000-0x001f] [ 2.281641] pci 0000:05:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 2.281988] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.282244] iommu: Adding device 0000:05:00.0 to group 60 [ 2.282251] arm-smmu: forcing sodev map for 0000:05:00.0 [ 2.282529] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05 [ 2.282542] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05 [ 2.282554] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 05 [ 2.282746] pci 0000:00:03.0: BAR 14: assigned [mem 0x40100000-0x402fffff] [ 2.282749] pci 0000:00:03.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.282754] pci 0000:01:00.0: BAR 14: assigned [mem 0x40100000-0x402fffff] [ 2.282756] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.282761] pci 0000:02:02.0: BAR 14: assigned [mem 0x40100000-0x401fffff] [ 2.282764] pci 0000:02:03.0: BAR 14: assigned [mem 0x40200000-0x402fffff] [ 2.282767] pci 0000:02:03.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.282770] pci 0000:02:01.0: PCI bridge to [bus 03] [ 2.282812] pci 0000:04:00.0: BAR 0: assigned [mem 0x40100000-0x40101fff 64bit] [ 2.282854] pci 0000:02:02.0: PCI bridge to [bus 04] [ 2.282868] pci 0000:02:02.0: bridge window [mem 0x40100000-0x401fffff] [ 2.282897] pci 0000:05:00.0: BAR 0: assigned [mem 0x40200000-0x4027ffff] [ 2.282910] pci 0000:05:00.0: BAR 3: assigned [mem 0x40280000-0x40283fff] [ 2.282923] pci 0000:05:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 2.282935] pci 0000:02:03.0: PCI bridge to [bus 05] [ 2.282941] pci 0000:02:03.0: bridge window [io 0x1000-0x1fff] [ 2.282956] pci 0000:02:03.0: bridge window [mem 0x40200000-0x402fffff] [ 2.282982] pci 0000:01:00.0: PCI bridge to [bus 02-05] [ 2.282989] pci 0000:01:00.0: bridge window [io 0x1000-0x1fff] [ 2.283003] pci 0000:01:00.0: bridge window [mem 0x40100000-0x402fffff] [ 2.283029] pci 0000:00:03.0: PCI bridge to [bus 01-05] [ 2.283033] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 2.283040] pci 0000:00:03.0: bridge window [mem 0x40100000-0x402fffff] [ 2.283548] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 2.283552] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.283555] pci 0000:02:01.0: Signaling PME through PCIe PME interrupt [ 2.283557] pci 0000:02:02.0: Signaling PME through PCIe PME interrupt [ 2.283559] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 2.283562] pci 0000:02:03.0: Signaling PME through PCIe PME interrupt [ 2.283564] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 2.283571] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded [ 2.283704] aer 0000:00:03.0:pcie002: service driver aer loaded [ 2.287390] igb 0000:05:00.0: enabling device (0000 -> 0002) [ 2.300588] igb 0000:05:00.0: The NVM Checksum Is Not Valid [ 2.340621] random: crng init done [ 2.340626] random: 7 urandom warning(s) missed due to ratelimiting [ 2.344765] usb 1-3.2: new low-speed USB device number 8 using tegra-xusb [ 2.371336] usb 1-3.2: New USB device found, idVendor=413c, idProduct=2107 [ 2.371342] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.371345] usb 1-3.2: Product: Dell USB Entry Keyboard [ 2.371348] usb 1-3.2: Manufacturer: DELL [ 2.376141] input: DELL Dell USB Entry Keyboard as /devices/3530000.xhci/usb1/1-3/1-3.2/1-3.2:1.0/0003:413C:2107.0002/input/input4 [ 2.394329] systemd-journald[2255]: Received request to flush runtime journal from PID 1 [ 2.397096] igb: probe of 0000:05:00.0 failed with error -5 [ 2.433212] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-3530000.xhci-3.2/input0 [ 2.512762] usb 1-3.4: new full-speed USB device number 9 using tegra-xusb [ 2.533297] usb 1-3.4: not running at top speed; connect to a high speed hub [ 2.534564] usb 1-3.4: New USB device found, idVendor=058f, idProduct=6366 [ 2.534570] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.534573] usb 1-3.4: Product: Flash Card Reader/Writer [ 2.534576] usb 1-3.4: Manufacturer: Generic [ 2.534578] usb 1-3.4: SerialNumber: 058F63666438 [ 2.535424] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 2.537297] scsi host1: usb-storage 1-3.4:1.0 [ 2.616757] usb 1-2.3.5: new high-speed USB device number 10 using tegra-xusb [ 2.637935] usb 1-2.3.5: New USB device found, idVendor=0424, idProduct=274e [ 2.637941] usb 1-2.3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.637944] usb 1-2.3.5: Product: Hub Controller [ 2.637947] usb 1-2.3.5: Manufacturer: Microchip Tech [ 3.030929] using random self ethernet address [ 3.047796] using random host ethernet address [ 3.307269] scsi 0:0:0:0: Direct-Access InnoDisk MiniDOM-U 2ME 0628 PQ: 0 ANSI: 4 [ 3.316199] sd 0:0:0:0: [sda] 15810560 512-byte logical blocks: (8.10 GB/7.54 GiB) [ 3.324406] sd 0:0:0:0: [sda] Write Protect is off [ 3.330938] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 3.331492] sd 0:0:0:0: [sda] No Caching mode page found [ 3.336942] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.350930] sda: sda1 [ 3.353513] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.564703] scsi 1:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.576094] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 3.729687] Mass Storage Function, version: 2009/09/11 [ 3.729694] LUN: removable file: (no medium) [ 3.736489] using random self ethernet address [ 3.747923] using random host ethernet address [ 3.794018] rndis0: HOST MAC 76:30:5b:e0:01:bc [ 3.794176] rndis0: MAC 76:30:5b:e0:01:bd [ 3.797912] usb0: HOST MAC 76:30:5b:e0:01:be [ 3.797946] usb0: MAC 76:30:5b:e0:01:bf [ 3.797974] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.804521] l4tbr0: port 1(rndis0) entered blocking state [ 3.804527] l4tbr0: port 1(rndis0) entered disabled state [ 3.805776] device rndis0 entered promiscuous mode [ 3.823181] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.830243] l4tbr0: port 2(usb0) entered blocking state [ 3.830248] l4tbr0: port 2(usb0) entered disabled state [ 3.836808] device usb0 entered promiscuous mode [ 3.843324] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.864212] CPU1: shutdown [ 3.867208] psci: CPU1 killed (polled 0 ms) [ 3.915768] Intel(R) Wireless WiFi driver for Linux [ 3.915772] Copyright(c) 2003- 2015 Intel Corporation [ 3.916149] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002) [ 3.949408] CPU2: shutdown [ 3.956832] psci: CPU2 killed (polled 0 ms) [ 3.993917] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 4.003262] iwlwifi 0000:04:00.0: Falling back to user helper [ 4.072231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.225016] zram: Added device: zram0 [ 4.229846] zram: Added device: zram1 [ 4.235130] zram: Added device: zram2 [ 4.237616] zram: Added device: zram3 [ 4.262513] zram0: detected capacity change from 0 to 501424128 [ 4.296067] Adding 489668k swap on /dev/zram0. Priority:5 extents:1 across:489668k SS [ 4.302200] zram1: detected capacity change from 0 to 501424128 [ 4.304041] bcpu-throttle-alert cooling device registered. [ 4.305771] mcpu-throttle-alert cooling device registered. [ 4.306609] gpu-throttle-alert cooling device registered. [ 4.332594] Adding 489668k swap on /dev/zram1. Priority:5 extents:1 across:489668k SS [ 4.336555] zram2: detected capacity change from 0 to 501424128 [ 4.359819] Adding 489668k swap on /dev/zram2. Priority:5 extents:1 across:489668k SS [ 4.369174] zram3: detected capacity change from 0 to 501424128 [ 4.383987] Adding 489668k swap on /dev/zram3. Priority:5 extents:1 across:489668k SS [ 4.395049] gpio tegra-gpio-aon wake51 for gpio=47(AA:7) [ 4.401886] net eth0: get_configure_l3v4_filter --> [ 4.402675] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.149199] usbcore: registered new interface driver btusb [ 5.153815] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 5.154801] Bluetooth: hci0: Device revision is 16 [ 5.154805] Bluetooth: hci0: Secure boot is enabled [ 5.154807] Bluetooth: hci0: OTP lock is enabled [ 5.154808] Bluetooth: hci0: API lock is enabled [ 5.154810] Bluetooth: hci0: Debug lock is disabled [ 5.154813] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.159729] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 5.191329] Bridge firewalling registered [ 5.253347] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.388927] tegradc 15200000.nvdisplay: blank - powerdown [ 5.423365] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.423397] Extcon AUX1(HDMI) disable [ 5.445142] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 5.445503] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 5.445870] tegradc 15200000.nvdisplay: unblank [ 5.446400] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.446466] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.447602] Parent Clock set for DC plld2 [ 5.454728] tegradc 15200000.nvdisplay: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m [ 5.456123] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 5.524955] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.524958] Extcon AUX1(HDMI) enable [ 5.539590] tegradc 15200000.nvdisplay: sync windows ret = 247 [ 5.869339] Netfilter messages via NETLINK v0.30. [ 5.895202] ctnetlink v0.93: registering with nfnetlink. [ 6.286579] cdc_acm 1-2.3.5:1.0: skipping garbage [ 6.292294] tegradc 15200000.nvdisplay: unblank [ 6.292308] tegradc 15210000.nvdisplay: blank - powerdown [ 6.293574] cdc_acm 1-2.3.5:1.1: ttyACM0: USB ACM device [ 6.294746] usbcore: registered new interface driver cdc_acm [ 6.294750] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 6.306003] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 6.672928] Bluetooth: hci0: Waiting for firmware download to complete [ 6.673766] Bluetooth: hci0: Firmware loaded in 1488949 usecs [ 6.673913] Bluetooth: hci0: Waiting for device to boot [ 6.694956] Bluetooth: hci0: Device booted in 20603 usecs [ 6.697591] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 6.702795] Bluetooth: hci0: Applying Intel DDC parameters completed [ 7.099942] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 7.112922] iwlwifi 0000:04:00.0: Falling back to user helper [ 7.221256] fuse init (API version 7.26) [ 7.448017] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 7.457680] iwlwifi 0000:04:00.0: Falling back to user helper [ 7.523078] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 7.532381] iwlwifi 0000:04:00.0: Falling back to user helper [ 7.544164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.544175] Bluetooth: BNEP socket layer initialized [ 7.546977] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off [ 7.547740] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.557769] iwlwifi 0000:04:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm [ 7.761359] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 7.763547] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 7.764388] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 7.883943] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 7.884614] thermal thermal_zone6: failed to read out thermal zone (-5) [ 7.891327] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi_1 [ 7.956892] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.959598] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 7.960054] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 8.082031] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 8.082362] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled [ 8.148558] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.249512] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.700631] tegradc 15200000.nvdisplay: blank - powerdown [ 29.758074] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 29.758080] Extcon AUX1(HDMI) disable [ 29.779101] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 29.779486] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 29.779644] tegradc 15210000.nvdisplay: blank - powerdown [ 29.907639] tegradc 15200000.nvdisplay: blank - powerdown [ 29.907649] tegradc 15200000.nvdisplay: unblank [ 29.908139] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 29.908208] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 29.909243] Parent Clock set for DC plld2 [ 29.915869] tegradc 15200000.nvdisplay: hdmi: tmds rate:533250K prod-setting:prod_c_hdmi_300m_600m [ 29.917163] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 29.985122] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 29.985127] Extcon AUX1(HDMI) enable [ 29.985455] tegradc 15200000.nvdisplay: unblank [ 29.985470] tegradc 15210000.nvdisplay: blank - powerdown [ 31.820843] vdd-3v3-disp-cvb: disabling [ 31.820847] vdd-3v3-cvb: disabling [ 31.820850] vdd-1v8-cvb: disabling [ 31.820852] vdd-fan: disabling [ 31.820854] vdd_sys_en: disabling [ 31.820863] spmic-ldo1: disabling [ 31.821024] vddio-sdmmc1: disabling [ 31.821145] avdd-ts-hv: disabling [ 31.821258] vdd-sys-bl: disabling [ 33.096585] tegradc 15200000.nvdisplay: unblank [ 33.096595] tegradc 15210000.nvdisplay: blank - powerdown [ 35.357307] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 90.557040] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 90.557068] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 90.557088] tegra-xudc-new 3550000.xudc: device mode off: 0 [ 90.557132] tegra-xudc-new 3550000.xudc: active: 1 => 0 [ 90.557156] tegra-xudc-new 3550000.xudc: entering ELPG [ 90.558992] tegra-xudc-new 3550000.xudc: entering ELPG done [ 111.392758] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 111.392826] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 111.392835] tegra-xudc-new 3550000.xudc: exiting ELPG [ 111.393814] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 111.393824] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 111.393839] tegra-xudc-new 3550000.xudc: active: 0 => 1 nvidia@nvidia-desktop:~$