=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.07.08 15:11:03 =~=~=~=~=~=~=~=~=~=~=~=
[1036.862] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[1036.871] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[1036.876] I> Boot-mode: Platform RCM
[1036.880] I> Chip revision : A02P
[1036.883] I> Bootrom patch version : 15 (correctly patched)
[1036.888] I> ATE fuse revision : 0x200
[1036.891] I> Ram repair fuse : 0x0
[1036.895] I> Ram Code : 0x2
[1036.897] I> rst_source : 0x0
[1036.900] I> rst_level : 0x0
[1036.904] I> USB configuration success
[1039.309] I> mb2 image downloaded
[1039.464] I> Recovery boot mode 0
[1039.467] I> Boot-device: eMMC
[1039.472] I> UPHY full init done
[1039.476] I> MB1 done

[1039.481] W> Profiler not initialized
[1039.485] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-e677d209)
[1039.493] W> Profiler not initialized
[1039.496] I> DMA Heap @ [0x40020000 - 0x40065800]
[1039.501] I> Default Heap @ [0xd486400 - 0xd48a400]
[1039.506] W> Profiler not initialized
[1039.509] W> Profiler not initialized
[1039.513] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[1039.518] W> device prod register failed
[1039.522] W> Profiler not initialized
[1039.580] I> sdmmc DDR50 mode
[1039.584] I> No supported QSPI flash found
[1039.588] E> QSPI Flash: Insufficient flash size (0 MB)
[1039.593] I> QSPI Flash is not present.
[1039.644] E> Link startup dme_set failed
[1039.648] E> UFS initialization failed
[1039.651] I> UFS is not present
[1039.654] W> Profiler not initialized
[1039.661] I> Found 15 partitions in SDMMC_BOOT (instance 3)
[1039.669] I> Found 37 partitions in SDMMC_USER (instance 3)
[1039.674] W> Profiler not initialized
[1039.678] W> Profiler not initialized
[1039.681] W> Profiler not initialized
[1039.685] I> Entering 3p server
[1039.688] I> USB configuration success
[1041.077] I> Populate chip info
[1041.246] I> Populate eeprom info
[1041.250] I> Populate eeprom info for module cvm
[1041.562] I> Rebooting : reboot-recovery



[0002.496] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0002.504] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0002.510] I> Boot-mode: Platform RCM
[0002.513] I> Chip revision : A02P
[0002.516] I> Bootrom patch version : 15 (correctly patched)
[0002.521] I> ATE fuse revision : 0x200
[0002.525] I> Ram repair fuse : 0x0
[0002.528] I> Ram Code : 0x2
[0002.531] I> rst_source : 0xb
[0002.533] I> rst_level : 0x1
[0002.537] I> USB configuration success
[0004.948] I> mb2 image downloaded
[0005.103] I> Recovery boot mode 0
[0005.106] I> Boot-device: eMMC
[0005.111] I> UPHY full init done
[0005.115] I> MB1 done

[0005.120] W> Profiler not initialized
[0005.123] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-e677d209)
[0005.131] W> Profiler not initialized
[0005.134] I> DMA Heap @ [0x40020000 - 0x40065800]
[0005.139] I> Default Heap @ [0xd486400 - 0xd48a400]
[0005.144] W> Profiler not initialized
[0005.147] W> Profiler not initialized
[0005.151] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0005.156] W> device prod register failed
[0005.160] W> Profiler not initialized
[0005.185] I> sdmmc DDR50 mode
[0005.189] I> No supported QSPI flash found
[0005.193] E> QSPI Flash: Insufficient flash size (0 MB)
[0005.198] I> QSPI Flash is not present.
[0005.249] E> Link startup dme_set failed
[0005.253] E> UFS initialization failed
[0005.256] I> UFS is not present
[0005.259] W> Profiler not initialized
[0005.267] I> Found 15 partitions in SDMMC_BOOT (instance 3)
[0005.275] I> Found 37 partitions in SDMMC_USER (instance 3)
[0005.281] W> Profiler not initialized
[0005.284] W> Profiler not initialized
[0005.288] W> Profiler not initialized
[0005.291] I> Entering 3p server
[0005.294] I> USB configuration success
[0006.709] I> Populate chip info
[0006.879] I> Populate eeprom info
[0006.883] I> Populate eeprom info for module cvm
[0007.193] I> Rebooting : reboot-recovery


[0333.302] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0333.311] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0333.316] I> Boot-mode: RCM
[0333.319] I> Chip revision : A02P
[0333.322] I> Bootrom patch version : 15 (correctly patched)
[0333.327] I> ATE fuse revision : 0x200
[0333.331] I> Ram repair fuse : 0x0
[0333.334] I> Ram Code : 0x2
[0333.336] I> rst_source : 0xb
[0333.339] I> rst_level : 0x1
[0333.343] I> USB configuration success
[0335.566] I> bct_bootrom image downloaded
[0335.574] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0335.582] I> Temperature = 36000
[0335.585] W> Skipping boost for clk: BPMP_CPU_NIC
[0335.590] W> Skipping boost for clk: BPMP_APB
[0335.594] W> Skipping boost for clk: AXI_CBB
[0335.598] W> Skipping boost for clk: AON_CPU_NIC
[0335.602] W> Skipping boost for clk: CAN1
[0335.606] W> Skipping boost for clk: CAN2
[0335.610] I> Boot-device: eMMC
[0335.613] I> Boot-device: eMMC
[0335.616] I> bct_mb1 image downloaded
[0335.625] I> ECC region[0]: Start:0x0, End:0x0
[0335.630] I> ECC region[1]: Start:0x0, End:0x0
[0335.634] I> ECC region[2]: Start:0x0, End:0x0
[0335.638] I> ECC region[3]: Start:0x0, End:0x0
[0335.642] I> ECC region[4]: Start:0x0, End:0x0
[0335.646] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0335.652] I> Non-ECC region[1]: Start:0x0, End:0x0
[0335.656] I> Non-ECC region[2]: Start:0x0, End:0x0
[0335.661] I> Non-ECC region[3]: Start:0x0, End:0x0
[0335.665] I> Non-ECC region[4]: Start:0x0, End:0x0
[0335.672] E> FAILED: Thermal config
[0335.679] E> FAILED: MEMIO rail config
[0335.697] I> bct_mem image downloaded
[0337.134] I> blob image downloaded
[0337.242] I> Recovery boot mode 0
[0337.311] I> MB1 done


SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21
HW Function test
Start Scheduler.
in late init

[0337.320] I> Welcome to MB2(TBoot-BPMP) Recovery (version: 00.00.2018.32-mobile-3047f1e7)
[0337.321] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0337.321] I> Default Heap @ [0xd486400 - 0xd48a400]
[0337.323] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0337.328] W> device prod register failed
[0337.333] I> parsing oem signed section of bpmp-fw header done
[0337.341] I> bpmp-fw binary copied from blob
[0337.343] I> oem authentication of bpmp-fw header done
[0337.347] I> bpmp-fw: Authentication init Done
[0337.352] I> parsing oem signed section of cpubl header done
[0337.358] I> cpubl binary copied from blob
[0337.361] I> bpmp-fw: Authentication Finalize Done
[0337.366] I> oem authentication of cpubl header done
[0337.370] I> cpubl: Authentication init Done
[0337.375] I> parsing oem signed section of tos header done
[0337.381] I> tos binary copied from blob
[0337.384] I> Relocating BR-BCT
[0337.387] I> cpubl: Authentication Finalize Done
[0337.391] I> oem authentication of tos header done
[0337.395] I> tos: Authentication init Done
[0337.400] I> parsing oem signed section of bpmp-fw-dtb header done
[0337.408] I> bpmp-fw-dtb binary copied from blob
[0337.410] I> tos: Authentication Finalize Done
[0337.416] I> oem authentication of bpmp-fw-dtb header done
[0337.420] I> bpmp-fw-dtb: Authentication init Done
[0337.424] I> parsing oem signed section of cpubl-dtb header done
[0337.431] I> cpubl-dtb binary copied from blob
[0337.434] I> bpmp-fw-dtb: Authentication Finalize Done
[0337.622] I> oem authentication of cpubl-dtb header done
[0337.622] I> cpubl-dtb: Authentication init Done
[0337.623] I> parsing oem signed section of eks header done
[0337.623] I> eks binary copied from blob
[0337.624] I> cpubl-dtb: Authentication Finalize Done
[0337.625] I> oem authentication of eks header done
[0337.625] I> eks: Authentication init Done
[0337.629] I> eks: Authentication Finalize Done
[0337.633] I> EKB detected (length: 0x410) @ VA:0x526fb600
NOTICE:  BL31: v1.3(release):5b49e7f80
NOTICE:  BL31: Built : 08:38:54, Feb 19 2021
ipc-unittest-main: 1519: Welcome to IPC unittest!!!
ipc-unittest-main: 1531: waiting forever
ipc-unittest-srv: 329: Init unittest services!!!
hwkey-agent: 40: hwkey-agent is running!!
hwkey-agent: 197: key_mgnt_processing .......
hwkey-agent: 189: Setting EKB key 0 to slot 14
hwkey-agent: 167: Init hweky-agent services!!
luks-srv: 40: luks-srv is running!!
luks-srv: 157: Init luks-srv IPC services!!
platform_bootstrap_epilog: trusty bootstrap complete

welcome to lk
calling constructors
initializing heap
creating bootstrap completion thread
top of bootstrap2()
initializing platform
bpmp: platform_init
tag is e73a758761f0c6d24a1e69a2ac6b5035
tag_show initialized
dt initialized
mail initialized
chipid initialized
fuse initialized
sku initialized
speedo initialized
ec_get_ec_list: found 45 ecs
ec initialized
ec_mrq initialized
vmon_populate_monitors: found 3 monitors
vmon initialized
adc initialized
fmon_populate_monitors: found 73 monitors
fmon initialized
fmon_mrq initialized
reset initialized
nvhs initialized
392 clocks registered
clk_mrq_init: mrq handler registered
clk initialized
nvlink initialized
io_dpd initialized
io_dpd initialized
thermal initialized
i2c5 controller initialized
initialized i2c mrq handling
i2c initialized
regulator initialized
avfs_clk_platform initialized
soctherm initialized
aotag initialized
powergate initialized
dvs initialized
pm initialized
pg_late initialized
strap initialized
tag initialized