dmesg --follow [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (root@ubuntu) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Dec 21 20:05:45 PST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2033152 [ 0.000000] DMA zone: 7192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 460288 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2001384 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30144(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7190560K/8132608K available (15358K kernel code, 2956K rwdata, 6708K rodata, 8640K init, 612K bss, 188384K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009620000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009620000 - 0xffffff8009e90000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e90000 - 0xffffff800a173008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a173008 - 0xffffff800a20c0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000719] Console: colour dummy device 80x25 [ 0.000731] console [tty0] enabled [ 0.000738] bootconsole [tegra_comb_uart0] disabled [ 0.000753] kmemleak: Kernel memory leak detector disabled [ 0.000771] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000786] pid_max: default: 32768 minimum: 301 [ 0.001877] Security Framework initialized [ 0.002475] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002486] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004086] ftrace: allocating 47077 entries in 184 pages [ 0.405097] sched-energy: Sched-energy-costs installed from DT [ 0.405116] ASID allocator initialised with 65536 entries [ 0.440359] tegra-id: chipid=21917. [ 0.440371] tegra-id: opt_subrevision=1. [ 0.440398] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.440435] DTS File Name: /home/liuxs/share/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.440446] DTB Build time: Dec 23 2021 00:32:57 [ 0.488507] CPU1: Booted secondary processor [4e0f0040] [ 0.520598] CPU2: Booted secondary processor [4e0f0040] [ 0.552706] CPU3: Booted secondary processor [4e0f0040] [ 0.584966] CPU4: Booted secondary processor [4e0f0040] [ 0.617041] CPU5: Booted secondary processor [4e0f0040] [ 0.617215] Brought up 6 CPUs [ 0.617268] SMP: Total of 6 processors activated. [ 0.617287] CPU features: detected feature: Privileged Access Never [ 0.617295] CPU features: detected feature: LSE atomic instructions [ 0.617302] CPU features: detected feature: User Access Override [ 0.617309] CPU features: detected feature: 32-bit EL0 Support [ 0.618793] CPU: All CPU(s) started at EL2 [ 0.618862] alternatives: patching kernel code [ 0.625247] devtmpfs: initialized [ 0.666750] Initilizing CustomIPI irq domain [ 0.666937] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.666952] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.676820] pinctrl core: initialized pinctrl subsystem [ 0.677031] OS set in device tree is not L4T. [ 0.677266] regulator-dummy: no parameters [ 0.677477] Initializing plugin-manager [ 0.677531] Plugin module not found [ 0.677569] Plugin-manager status disabled [ 0.679111] NET: Registered protocol family 16 [ 0.680310] pstore: using zlib compression [ 0.680334] console [pstore-1] enabled [ 0.680343] pstore: Registered ramoops as persistent store backend [ 0.680351] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.695816] cpuidle: using governor menu [ 0.697379] bpmp: waiting for handshake [ 0.697391] bpmp: handshake completed [ 0.697408] bpmp: synchronizing channels [ 0.697419] bpmp: channels synchronized [ 0.697427] bpmp: mail init ok [ 0.700523] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.700766] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.700774] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.700800] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.700805] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.700812] t19x-arm-smmu 12000000.iommu: nested translation [ 0.700820] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.700828] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.700836] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.700863] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.700869] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.704162] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e94000) [ 0.704200] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.707066] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.709066] tegra_aon_clk_init: ok [ 0.709081] Registering BPMP clocks... [ 0.709237] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.710047] Serial: AMBA PL011 UART driver [ 0.710172] tegra_powergate_init: DONE [ 0.710254] DTS File Name: /home/liuxs/share/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.710297] DTB Build time: Dec 23 2021 00:32:57 [ 0.713718] Tegra reboot handler registered. [ 0.722333] iommu: Adding device 14160000.pcie to group 0 [ 0.723001] iommu: Adding device 141a0000.pcie to group 1 [ 0.724423] iommu: Adding device 2490000.ether_qos to group 2 [ 0.724977] iommu: Adding device 3100000.serial to group 3 [ 0.725475] iommu: Adding device 3110000.serial to group 4 [ 0.725926] iommu: Adding device 3140000.serial to group 5 [ 0.726598] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.727007] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.727031] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.727051] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.727060] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.727120] tegra-pmc: PMC Prod config success [ 0.727369] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.727383] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.727719] iommu: Adding device 3400000.sdhci to group 6 [ 0.728266] iommu: Adding device 3210000.spi to group 7 [ 0.728741] iommu: Adding device 3230000.spi to group 8 [ 0.729154] iommu: Adding device 3270000.spi to group 9 [ 0.730372] iommu: Adding device 3160000.i2c to group 10 [ 0.730766] iommu: Adding device c240000.i2c to group 11 [ 0.731149] iommu: Adding device 3180000.i2c to group 12 [ 0.731600] iommu: Adding device 3190000.i2c to group 13 [ 0.732127] iommu: Adding device 31b0000.i2c to group 14 [ 0.732564] iommu: Adding device 31c0000.i2c to group 15 [ 0.732975] iommu: Adding device c250000.i2c to group 16 [ 0.733379] iommu: Adding device 31e0000.i2c to group 17 [ 0.733952] iommu: Adding device sound to group 18 [ 0.734474] iommu: Adding device 3510000.hda to group 19 [ 0.735043] iommu: Adding device bc00000.rtcpu to group 20 [ 0.736859] iommu: Adding device 13e10000.host1x to group 21 [ 0.737294] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.737672] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.738051] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.738437] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.738832] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.739183] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.739548] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.739926] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.740489] iommu: Adding device 15340000.vic to group 30 [ 0.740907] iommu: Adding device 15380000.nvjpg to group 31 [ 0.741205] iommu: Adding device 15500000.tsec to group 32 [ 0.741490] iommu: Adding device 15100000.tsecb to group 33 [ 0.741809] iommu: Adding device 15480000.nvdec to group 34 [ 0.742234] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.742546] iommu: Adding device 154c0000.nvenc to group 36 [ 0.742999] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.743561] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.743977] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.744611] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.748699] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.748768] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.749426] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.749502] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.751325] iommu: Adding device 15c10000.vi to group 42 [ 0.751552] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.752009] iommu: Adding device 14800000.isp to group 43 [ 0.753046] iommu: Adding device 16000000.pva0 to group 44 [ 0.753550] iommu: Adding device 16800000.pva1 to group 45 [ 0.753972] iommu: Adding device 15810000.se to group 46 [ 0.754384] iommu: Adding device 15820000.se to group 47 [ 0.754672] iommu: Adding device 15830000.se to group 48 [ 0.754945] iommu: Adding device 15840000.se to group 49 [ 0.755208] iommu: Adding device c1a0000.aon to group 50 [ 0.756801] iommu: Adding device d000000.bpmp to group 51 [ 0.757122] bpmp: ping status is 0 [ 0.757249] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.760682] bpmp d000000.bpmp: probe ok [ 0.762523] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.763086] iommu: Adding device smmu_test to group 52 [ 0.764205] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.764223] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.764239] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.764256] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.764276] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.764290] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.764305] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.764319] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.764334] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.764348] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.764363] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.764377] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.764392] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.764406] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.764421] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.764442] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.764459] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.764529] mc-err: mcerr ops are set to t19x [ 0.771007] iommu: Adding device 2600000.dma to group 53 [ 0.776682] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.777978] GPIO line 339 (wifi-enable) hogged as output/high [ 0.778021] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.778060] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.778398] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.786778] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.786848] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.786884] GPIO line 266 (w-disable1) hogged as output/high [ 0.786917] GPIO line 264 (w-disable2) hogged as output/high [ 0.786950] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.787259] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.789796] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.789816] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.789827] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.790656] iommu: Adding device 3550000.xudc to group 54 [ 0.791405] iommu: Adding device 3610000.xhci to group 55 [ 0.794323] arm64_ras arm64_ras: probed [ 0.794702] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.794750] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.794853] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.794937] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.795068] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.795136] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.795319] carmel_ras_enable: RAS enabled on cpu0 [ 0.795489] carmel_ras_enable: RAS enabled on cpu1 [ 0.795676] carmel_ras_enable: RAS enabled on cpu2 [ 0.795879] carmel_ras_enable: RAS enabled on cpu3 [ 0.796073] carmel_ras_enable: RAS enabled on cpu4 [ 0.796288] carmel_ras_enable: RAS enabled on cpu5 [ 0.796383] carmel_ras carmel_ras: probed [ 0.797612] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.798149] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.799134] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.800091] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.801015] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.801365] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.802682] vdd-ac-bat: 5000 mV [ 0.803091] vdd-sdmmc1-sw: 3300 mV [ 0.803409] vdd-1v8-sd: 1800 mV [ 0.803819] vdd-3v3-cvb: 3300 mV [ 0.804170] vdd-1v8-cvb: 1800 mV [ 0.804497] vdd-epb-1v0: 1000 mV [ 0.804683] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.805060] avdd-cam-2v8: 2800 mV [ 0.805417] vdd-fan: 5000 mV [ 0.805726] vdd-hdmi-5v0: 5000 mV [ 0.806096] vdd_sys_en: 1200 mV [ 0.833924] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.838516] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.838842] SCSI subsystem initialized [ 0.839062] libata version 3.00 loaded. [ 0.839313] usbcore: registered new interface driver usbfs [ 0.839366] usbcore: registered new interface driver hub [ 0.839415] usbcore: registered new device driver usb [ 0.850484] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.853374] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.864890] vdd-1v0: at 1000 mV [ 0.872936] vdd-1v8-hs: at 1800 mV [ 0.881006] vdd-1v8-ls: at 1800 mV [ 0.889008] vdd-1v8-ao: at 1800 mV [ 0.897037] vddio-ddr-1v1: at 1100 mV [ 0.904794] vdd-rtc: at 800 mV [ 0.906014] spmic-ldo1: at 2375 mV [ 0.916853] vdd-ao-3v3: at 3300 mV [ 0.928876] vddio-emmc-3v3: at 3300 mV [ 0.930286] spmic-ldo4: at 1587 mV [ 0.940934] vdd-usb-3v3: at 3300 mV [ 0.952972] vddio-sdmmc1-3v3: at 3300 mV [ 0.960994] vdd-csi-1v2: at 1200 mV [ 0.962524] spmic-ldo8: at 1800 mV [ 0.967388] GPIO line 246 (gpio_default) hogged as output/high [ 0.968782] GPIO line 247 (gpio_default) hogged as output/high [ 0.969113] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.969478] max77620 4-003c: max77620 probe successful [ 0.970091] media: Linux media interface: v0.10 [ 0.970144] Linux video capture interface: v2.00 [ 0.971683] pps_core: LinuxPPS API ver. 1 registered [ 0.971691] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.971752] PTP clock support registered [ 0.972140] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.972375] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.972424] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.974997] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.975064] trusty trusty: selected api version: 3 (requested 3) [ 0.976149] Advanced Linux Sound Architecture Driver Initialized. [ 0.976710] Bluetooth: Core ver 2.22 [ 0.976749] NET: Registered protocol family 31 [ 0.976755] Bluetooth: HCI device and connection manager initialized [ 0.976765] Bluetooth: HCI socket layer initialized [ 0.976799] Bluetooth: L2CAP socket layer initialized [ 0.976827] Bluetooth: SCO socket layer initialized [ 0.979409] camchar: rtcpu character device driver loaded [ 0.979938] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.980034] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.981757] clocksource: Switched to clocksource arch_sys_counter [ 1.028895] VFS: Disk quotas dquot_6.6.0 [ 1.029048] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.029442] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.030762] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.030809] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.031063] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.031071] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.031085] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.031101] nvmap_page_pool_init: Total RAM pages: 1986056 [ 1.031107] nvmap_page_pool_init: nvmap page pool size: 248257 pages (969 MB) [ 1.031252] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.031736] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.034050] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.047898] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.048139] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.048375] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.048600] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.048858] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.050074] la/ptsa driver initialized. [ 1.050536] NET: Registered protocol family 2 [ 1.051435] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.051772] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.052382] TCP: Hash tables configured (established 65536 bind 65536) [ 1.052431] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.052548] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.053063] NET: Registered protocol family 1 [ 1.053607] RPC: Registered named UNIX socket transport module. [ 1.053613] RPC: Registered udp transport module. [ 1.053618] RPC: Registered tcp transport module. [ 1.053622] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.053632] PCI: CLS 0 bytes, default 64 [ 1.053911] Trying to unpack rootfs image as initramfs... [ 1.285718] Freeing initrd memory: 7068K [ 1.305705] random: fast init done [ 1.310134] host1x 13e10000.host1x: initialized [ 1.311903] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.316633] audit: initializing netlink subsys (disabled) [ 1.316687] audit: type=2000 audit(0.932:1): initialized [ 1.317464] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.328955] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.330437] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.331292] 9p: Installing v9fs 9p2000 file system support [ 1.336985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.337184] io scheduler noop registered [ 1.337486] io scheduler cfq registered (default) [ 1.341246] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.345094] iommu: Adding device 2993000.adsp to group 56 [ 1.383182] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.384110] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.398054] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.398531] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.399165] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.399577] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.399965] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.403373] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.403561] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.406481] tsec 15500000.tsec: initialized [ 1.408331] tsec 15100000.tsecb: initialized [ 1.412506] nvdec 15480000.nvdec: initialized [ 1.415460] nvdec 15140000.nvdec1: initialized [ 1.421316] falcon 15340000.vic: initialized [ 1.423622] falcon 15380000.nvjpg: initialized [ 1.425663] falcon 154c0000.nvenc: initialized [ 1.427605] falcon 15a80000.nvenc1: initialized [ 1.430574] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.432585] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.434093] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.435490] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.436913] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.438287] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.439676] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.441098] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.444384] t194-nvcsi 15a00000.nvcsi: initialized [ 1.449481] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.449856] scare-pigeon 14b00000.isp-thi: initialized [ 1.455303] pva 16000000.pva0: initialized [ 1.460939] pva 16800000.pva1: initialized [ 1.465784] nvdla 15880000.nvdla0: initialized [ 1.470639] nvdla 158c0000.nvdla1: initialized [ 1.471909] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.471924] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.471965] tegradccommon 15200000.dc_common: dma mapping done [ 1.473075] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.473107] generic_infoframe_type: 0x87 [ 1.473200] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.473236] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.476824] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.476832] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.476838] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.477081] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.477093] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.480080] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.480089] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.483781] tegradc 15200000.nvdisplay: probed [ 1.484416] Console: switching to colour frame buffer device 80x30 [ 1.484446] tegradc 15200000.nvdisplay: fb registered [ 1.484687] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.485255] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.485286] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.485390] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.485429] tegradc 15210000.nvdisplay: Display dc.ffffff800be50000 registered with id=1 [ 1.485581] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.485613] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.494468] tegradc 15210000.nvdisplay: probed [ 1.494798] tegradc 15210000.nvdisplay: fb registered [ 1.498987] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.500477] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.501969] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.503453] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.503518] tegradc 15210000.nvdisplay: dp: Failed for I2C write addr:80, size:1, stat:0x10000100 [ 1.504395] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.504519] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.504639] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.509660] Parent Clock set for DC pll_d [ 1.514910] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.516404] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.517895] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.519380] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.519414] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.520112] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.521481] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.522992] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.524501] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.524550] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.525287] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.526796] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.528307] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.529552] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.529581] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.530351] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.531908] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.533440] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.535020] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.535075] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.535104] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 1.535189] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.535197] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.535475] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.535485] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.535758] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.535900] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.536071] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.536080] tegra_cec 3960000.tegra_cec: probed [ 1.545535] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.546464] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.546473] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.546775] kfuse 3830000.kfuse: initialized [ 1.553083] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.555757] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.556843] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.557756] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.561823] console [ttyTCU0] enabled [ 1.562121] [drm] Initialized [ 1.574518] brd: module loaded [ 1.584738] loop: module loaded [ 1.584842] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.585015] tegra_profiler: auth: init [ 1.585638] THERMAL EST: found 3 subdevs [ 1.585644] THERMAL EST num_resources: 0 [ 1.585650] [THERMAL EST subdev 0] [ 1.585657] [THERMAL EST subdev 1] [ 1.585663] [THERMAL EST subdev 2] [ 1.585673] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.586075] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.586080] THERMAL EST: thz register success. [ 1.586207] THERMAL EST: end of probe, return err: 0 [ 1.586912] sd: No Scsi addr parsed to reserve index [ 1.586945] hisi_sas: driver version v1.6 [ 1.597820] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.597830] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.597839] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.598061] 1 ofpart partitions found on MTD device spi6.0 [ 1.598067] Creating 1 MTD partitions on "spi6.0": [ 1.598085] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.600572] libphy: Fixed MDIO Bus: probed [ 1.601390] tun: Universal TUN/TAP device driver, 1.6 [ 1.601395] tun: (C) 1999-2004 Max Krasnyansky [ 1.603232] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.603237] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.603285] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.603289] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.603337] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.603341] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.603384] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.603389] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.636856] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.636878] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.644841] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.645548] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.647045] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.648539] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.650046] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.650232] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.651147] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.652468] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.653995] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.655497] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.655658] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.656521] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.658020] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.659512] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.661036] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.661215] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.662103] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.663625] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.665162] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.666676] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.666874] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.667068] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 1.667266] hpd: edid read prepare failed [ 1.667363] hpd: DC from connected to disconnected [ 1.848021] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.848633] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3d 9c 6e [ 1.848655] Using phyrst_lpmode = 1 from DT [ 1.848891] libphy: dwc_phy: probed [ 1.851679] PPP generic driver version 2.4.2 [ 1.851911] PPP BSD Compression module registered [ 1.851918] PPP Deflate Compression module registered [ 1.851936] PPP MPPE Compression module registered [ 1.851942] NET: Registered protocol family 24 [ 1.852039] usbcore: registered new interface driver r8152 [ 1.852129] usbcore: registered new interface driver asix [ 1.852211] usbcore: registered new interface driver ax88179_178a [ 1.852289] usbcore: registered new interface driver cdc_ether [ 1.852365] usbcore: registered new interface driver net1080 [ 1.852483] usbcore: registered new interface driver cdc_subset [ 1.852594] usbcore: registered new interface driver zaurus [ 1.852715] usbcore: registered new interface driver cdc_ncm [ 1.852952] VFIO - User Level meta-driver version: 0.3 [ 1.854630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.854655] ehci-pci: EHCI PCI platform driver [ 1.854747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.854760] ohci-pci: OHCI PCI platform driver [ 1.854853] ohci-platform: OHCI generic platform driver [ 1.859840] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.862019] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4e2c000 id [ 1.862744] usbcore: registered new interface driver uas [ 1.862811] usbcore: registered new interface driver usb-storage [ 1.862901] usbcore: registered new interface driver usbserial [ 1.864358] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.864391] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.864411] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.865112] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.865160] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.865378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.865385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.865391] usb usb1: Product: xHCI Host Controller [ 1.865398] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.865403] usb usb1: SerialNumber: 3610000.xhci [ 1.866029] hub 1-0:1.0: USB hub found [ 1.866096] hub 1-0:1.0: 4 ports detected [ 1.866793] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.866805] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.866844] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.867109] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.867117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.867122] usb usb2: Product: xHCI Host Controller [ 1.867128] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.867133] usb usb2: SerialNumber: 3610000.xhci [ 1.867764] hub 2-0:1.0: USB hub found [ 1.867811] hub 2-0:1.0: 4 ports detected [ 1.868392] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.868469] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.868766] Wake76 for irq=199 [ 1.868771] Wake77 for irq=199 [ 1.868775] Wake78 for irq=199 [ 1.868779] Wake79 for irq=199 [ 1.868783] Wake80 for irq=199 [ 1.868787] Wake81 for irq=199 [ 1.868790] Wake82 for irq=199 [ 1.868883] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.868891] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.869292] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.869306] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.869652] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.869966] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.869992] mousedev: PS/2 mouse device common for all mice [ 1.870094] usbcore: registered new interface driver xpad [ 1.969339] usb usb1: usb_suspend_both: status 0 [ 1.969494] usb usb2: usb_suspend_both: status 0 [ 2.003888] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.005431] Wake73 for irq=42 [ 2.006678] rtc rtc1: alarm rtc device [ 2.006695] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.006726] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.006850] i2c /dev entries driver [ 2.009344] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.009743] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.009751] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.010179] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.033658] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.033715] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.034006] imx219 9-0010: board setup failed [ 2.034191] imx219: probe of 9-0010 failed with error -121 [ 2.034637] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.057879] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.057941] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.058195] imx219 10-0010: board setup failed [ 2.058357] imx219: probe of 10-0010 failed with error -121 [ 2.059777] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 2.066486] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.066874] FAN dev name: pwm-fan [ 2.066917] FAN:gpio request success. [ 2.066927] FAN: can't find tach_gpio [ 2.066938] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.066964] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.067187] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.067193] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.067726] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.067734] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.067740] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.067746] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.067753] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.067758] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.067765] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.067770] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.067777] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.067783] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.068778] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.069814] device-mapper: uevent: version 1.0.3 [ 2.070321] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.073839] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.074850] cpuidle: Initializing cpuidle driver [ 2.075830] sdhci: Secure Digital Host Controller Interface driver [ 2.075833] sdhci: Copyright(c) Pierre Ossman [ 2.075837] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.076113] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.076926] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.078874] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 246 [ 2.083096] tegra-se-nvhost 15810000.se: initialized [ 2.084379] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.085239] tegra-se-nvhost 15820000.se: initialized [ 2.086355] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.086987] tegra-se-nvhost 15830000.se: initialized [ 2.087701] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.088285] tegra-se-nvhost 15840000.se: initialized [ 2.089412] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.090599] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.090735] hidraw: raw HID events driver (C) Jiri Kosina [ 2.092950] usbcore: registered new interface driver usbhid [ 2.092954] usbhid: USB HID core driver [ 2.097248] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.098413] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.098922] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.099742] denver_knobs_init:MTS_VERSION:53250041 [ 2.100108] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.100753] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.101259] t19x_cache tegra-cache: probed [ 2.103756] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.103767] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.104367] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.104902] PLL_AON clock registered [ 2.106090] Clocks initialized successfully [ 2.107653] nvpmodel: initialized successfully [ 2.109049] trusty-virtio trusty:virtio: initializing [ 2.109293] trusty_ipc virtio0: vring0: va(pa) ffffffc1f2798000(0) qsz 32 notifyid 1 [ 2.109303] trusty_ipc virtio0: vring1: va(pa) ffffffc1f279a000(0) qsz 32 notifyid 2 [ 2.109451] trusty-virtio trusty:virtio: initializing done [ 2.109703] trusty_ipc virtio0: is online [ 2.110754] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.111161] usbcore: registered new interface driver snd-usb-audio [ 2.123918] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.124123] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.124332] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.124521] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.124950] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.125005] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.201075] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.258487] OPE platform probe [ 2.258638] OPE platform probe successful [ 2.340179] mmc0: hw tuning done ... [ 2.340234] mmc0: new ultra high speed SDR104 SDHC card at address b368 [ 2.340758] mmcblk0: mmc0:b368 CBADS 29.3 GiB [ 2.344276] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.360729] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.360858] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.360947] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.361038] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.361124] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.361247] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.361360] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.361467] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.361569] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.361656] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.361744] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.361835] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.361923] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.362015] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.362107] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.362233] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.362330] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.362457] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.362578] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.362707] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.392490] u32 classifier [ 2.392495] Actions configured [ 2.392584] Initializing XFRM netlink socket [ 2.393297] NET: Registered protocol family 10 [ 2.394085] NET: Registered protocol family 17 [ 2.394097] NET: Registered protocol family 15 [ 2.394159] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.394268] Bluetooth: RFCOMM socket layer initialized [ 2.394287] Bluetooth: RFCOMM ver 1.11 [ 2.394295] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.394301] Bluetooth: HIDP socket layer initialized [ 2.394323] 9pnet: Installing 9P2000 support [ 2.394368] Key type dns_resolver registered [ 2.394572] Registered cp15_barrier emulation handler [ 2.394597] Registered setend emulation handler [ 2.396616] registered taskstats version 1 [ 2.397087] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.398140] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.398158] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.398166] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.398172] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.552854] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.552860] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.685153] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 2.685335] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 2.687084] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 2.687139] tegradc 15210000.nvdisplay: blank - powerdown [ 2.687150] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 2.687153] Extcon DP: HPD disabled [ 2.687157] hpd: hpd_switch 0 [ 2.687160] hpd: switching from state 2 (Check EDID) to state 3 (Disabled) [ 2.913513] tegra-pcie-dw 14160000.pcie: link is down [ 2.913783] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.913792] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.913801] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.913807] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.913812] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.913840] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.914019] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.914283] iommu: Adding device 0004:00:00.0 to group 58 [ 2.914656] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.914680] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.914958] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.914965] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.915073] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.915259] pcie_pme 0004:00:00.0:pcie001: unloading service driver pcie_pme [ 2.915363] aer 0004:00:00.0:pcie002: unloading service driver aer [ 2.915462] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 2.915586] iommu: Removing device 0004:00:00.0 from group 58 [ 2.915651] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 2.917365] tegra-pcie-dw 14160000.pcie: PCIe link is not up...! [ 2.918062] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.918282] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.918293] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 3.025118] OF: PCI: host bridge /pcie@141a0000 ranges: [ 3.025155] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 3.025164] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 3.025169] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.542472] tegra-pcie-dw 141a0000.pcie: link is down [ 3.542678] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.542695] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.542703] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.542710] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.542737] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.542763] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.542922] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.543172] iommu: Adding device 0005:00:00.0 to group 58 [ 3.543548] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.543571] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.543840] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.543847] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.543945] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.544129] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.544180] aer 0005:00:00.0:pcie002: unloading service driver aer [ 3.544253] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.544341] iommu: Removing device 0005:00:00.0 from group 58 [ 3.544373] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.546720] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.557846] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 3.562276] tegra194-isp5 14800000.isp: initialized [ 3.569926] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.572649] tegra194-vi5 15c10000.vi: initialized [ 3.577160] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.577292] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.577514] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.581757] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.581775] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.581780] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.581882] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.581936] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.581941] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.585771] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.585811] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.585816] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.586069] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.586110] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.586115] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.586570] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.586619] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.586624] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.586856] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.587642] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.664878] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.665246] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.665490] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.665730] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.666254] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.666373] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.666597] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 3.666602] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.667659] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.668042] Wake83 for irq=211 [ 3.668122] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.668196] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.668355] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.701880] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:15 UTC (946688415) [ 3.702321] mmcblk mmc0:b368: Card claimed for testing. [ 3.743209] bpmp: mounted debugfs mirror [ 3.749437] ALSA device list: [ 3.749445] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 3.749449] #1: jetson-xaviernx-ape [ 3.751625] Freeing unused kernel memory: 8640K [ 3.791281] Root device found: mmcblk0p1 [ 3.793139] Found dev node: /dev/mmcblk0p1 [ 3.858077] EXT4-fs (mmcblk0p1): 14 orphan inodes deleted [ 3.858084] EXT4-fs (mmcblk0p1): recovery complete [ 3.873515] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.876520] Rootfs mounted over mmcblk0p1 [ 3.895259] Switching from initrd to actual rootfs [ 4.076475] systemd[1]: System time before build time, advancing clock. [ 4.107155] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.112374] cgroup: cgroup2: unknown option "nsdelegate" [ 4.123101] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.123854] systemd[1]: Detected architecture arm64. [ 4.129546] systemd[1]: Set hostname to . [ 4.184839] tegra-xusb 3610000.xhci: entering ELPG [ 4.188664] tegra-xusb 3610000.xhci: entering ELPG done [ 4.233852] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.233865] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.390550] random: systemd: uninitialized urandom read (16 bytes read) [ 4.390611] systemd[1]: Reached target User and Group Name Lookups. [ 4.390852] random: systemd: uninitialized urandom read (16 bytes read) [ 4.393962] systemd[1]: Created slice System Slice. [ 4.394058] random: systemd: uninitialized urandom read (16 bytes read) [ 4.394424] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.395716] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.395894] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.454305] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.470897] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.555660] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.815044] systemd-journald[2283]: Received request to flush runtime journal from PID 1 [ 5.667288] random: crng init done [ 5.667406] random: 7 urandom warning(s) missed due to ratelimiting [ 5.722077] cpu-throttle-alert cooling device registered. [ 5.722423] gpu-throttle-alert cooling device registered. [ 5.722780] aux-throttle-alert cooling device registered. [ 6.388964] using random self ethernet address [ 6.389091] using random host ethernet address [ 7.109873] blk_update_request: I/O error, dev loop1, sector 0 [ 7.110050] blk_update_request: I/O error, dev loop1, sector 0 [ 7.110160] Buffer I/O error on dev loop1, logical block 0, async page read [ 7.110307] blk_update_request: I/O error, dev loop1, sector 0 [ 7.110413] Buffer I/O error on dev loop1, logical block 0, async page read [ 7.388143] Mass Storage Function, version: 2009/09/11 [ 7.388154] LUN: removable file: (no medium) [ 7.394363] using random self ethernet address [ 7.394486] using random host ethernet address [ 7.677461] ras_fhi_disable: FHI 473 disabled [ 7.682210] CPU4: shutdown [ 7.683411] psci: CPU4 killed (polled 0 ms) [ 7.741390] ras_fhi_disable: FHI 474 disabled [ 7.742649] CPU5: shutdown [ 7.743883] psci: CPU5 killed (polled 0 ms) [ 7.746996] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 7.859103] rndis0: HOST MAC 6e:92:30:fb:9d:bc [ 7.859454] rndis0: MAC 6e:92:30:fb:9d:bd [ 7.864870] usb0: HOST MAC 6e:92:30:fb:9d:be [ 7.864977] usb0: MAC 6e:92:30:fb:9d:bf [ 7.865008] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.875955] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.875977] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.876018] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.880752] l4tbr0: port 1(rndis0) entered blocking state [ 7.880760] l4tbr0: port 1(rndis0) entered disabled state [ 7.881600] device rndis0 entered promiscuous mode [ 7.883504] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.883528] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.891476] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.896262] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.896283] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.903846] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.908099] l4tbr0: port 2(usb0) entered blocking state [ 7.908107] l4tbr0: port 2(usb0) entered disabled state [ 7.912270] device usb0 entered promiscuous mode [ 7.950172] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.970660] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.166765] zram: Added device: zram0 [ 8.174518] zram: Added device: zram1 [ 8.175004] zram: Added device: zram2 [ 8.177613] zram: Added device: zram3 [ 8.219720] zram0: detected capacity change from 0 to 1018871808 [ 8.271106] Adding 994988k swap on /dev/zram0. Priority:5 extents:1 across:994988k SS [ 8.277186] zram1: detected capacity change from 0 to 1018871808 [ 8.285835] gpio tegra-gpio wake20 for gpio=52(G:4) [ 8.291425] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.299123] Adding 994988k swap on /dev/zram1. Priority:5 extents:1 across:994988k SS [ 8.328359] zram2: detected capacity change from 0 to 1018871808 [ 8.349051] Adding 994988k swap on /dev/zram2. Priority:5 extents:1 across:994988k SS [ 8.352063] zram3: detected capacity change from 0 to 1018871808 [ 8.399168] Adding 994988k swap on /dev/zram3. Priority:5 extents:1 across:994988k SS [ 9.945068] eqos 2490000.ether_qos eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 9.945689] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.202949] Bridge firewalling registered [ 10.230594] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 10.509358] Netfilter messages via NETLINK v0.30. [ 10.511968] ctnetlink v0.93: registering with nfnetlink. [ 10.712061] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 11.101687] tegradc 15200000.nvdisplay: blank - powerdown [ 11.101699] tegradc 15210000.nvdisplay: blank - powerdown [ 12.256485] fuse init (API version 7.26) [ 14.410863] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.410879] Bluetooth: BNEP socket layer initialized [ 34.137116] vdd-1v8-sd: disabling [ 34.137150] vdd-1v8-cvb: disabling [ 34.137158] vdd-epb-1v0: disabling [ 34.137166] avdd-cam-2v8: disabling [ 34.137173] vdd-fan: disabling [ 34.137180] vdd_sys_en: disabling