[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-5285-d7000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Feb 19 08:42:04 PST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2033152 [ 0.000000] DMA zone: 7192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 460288 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2001384 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29080(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7190816K/8132608K available (15294K kernel code, 2942K rwdata, 6664K rodata, 8576K init, 609K bss, 188128K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a13f808 - 0xffffff800a1d7cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000724] Console: colour dummy device 80x25 [ 0.000735] console [tty0] enabled [ 0.000742] bootconsole [tegra_comb_uart0] disabled [ 0.000756] kmemleak: Kernel memory leak detector disabled [ 0.000775] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000790] pid_max: default: 32768 minimum: 301 [ 0.001884] Security Framework initialized [ 0.002457] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002468] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004072] ftrace: allocating 47208 entries in 185 pages [ 0.405635] sched-energy: Sched-energy-costs installed from DT [ 0.405654] ASID allocator initialised with 65536 entries [ 0.440848] tegra-id: chipid=21917. [ 0.440860] tegra-id: opt_subrevision=1. [ 0.440887] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.440902] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.440913] DTB Build time: Feb 19 2021 08:44:25 [ 0.488910] CPU1: Booted secondary processor [4e0f0040] [ 0.520971] CPU2: Booted secondary processor [4e0f0040] [ 0.553119] CPU3: Booted secondary processor [4e0f0040] [ 0.585354] CPU4: Booted secondary processor [4e0f0040] [ 0.617422] CPU5: Booted secondary processor [4e0f0040] [ 0.617618] Brought up 6 CPUs [ 0.617627] SMP: Total of 6 processors activated. [ 0.617637] CPU features: detected feature: Privileged Access Never [ 0.617643] CPU features: detected feature: LSE atomic instructions [ 0.617649] CPU features: detected feature: User Access Override [ 0.617656] CPU features: detected feature: 32-bit EL0 Support [ 0.619088] CPU: All CPU(s) started at EL2 [ 0.619141] alternatives: patching kernel code [ 0.625566] devtmpfs: initialized [ 0.661300] Initilizing CustomIPI irq domain [ 0.661537] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.661551] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.676484] pinctrl core: initialized pinctrl subsystem [ 0.676712] OS set in device tree is not L4T. [ 0.676921] regulator-dummy: no parameters [ 0.677098] Initializing plugin-manager [ 0.677140] Plugin module not found [ 0.677173] Plugin-manager status disabled [ 0.678530] NET: Registered protocol family 16 [ 0.679634] pstore: using zlib compression [ 0.679654] console [pstore-1] enabled [ 0.679659] pstore: Registered ramoops as persistent store backend [ 0.679666] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.696044] cpuidle: using governor menu [ 0.697180] bpmp: waiting for handshake [ 0.697188] bpmp: handshake completed [ 0.697203] bpmp: synchronizing channels [ 0.697212] bpmp: channels synchronized [ 0.697219] bpmp: mail init ok [ 0.699579] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.699769] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.699776] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.699783] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.699790] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.699817] t19x-arm-smmu 12000000.iommu: nested translation [ 0.699826] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.699834] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.699841] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.699849] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.699873] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.702888] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.702912] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.705427] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.706847] tegra_aon_clk_init: ok [ 0.706855] Registering BPMP clocks... [ 0.706946] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.707539] Serial: AMBA PL011 UART driver [ 0.707644] tegra_powergate_init: DONE [ 0.707721] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.707732] DTB Build time: Feb 19 2021 08:44:25 [ 0.710486] Tegra reboot handler registered. [ 0.717021] iommu: Adding device 14160000.pcie to group 0 [ 0.717554] iommu: Adding device 141a0000.pcie to group 1 [ 0.718667] iommu: Adding device 2490000.ether_qos to group 2 [ 0.719091] iommu: Adding device 3100000.serial to group 3 [ 0.719549] iommu: Adding device 3110000.serial to group 4 [ 0.720076] iommu: Adding device 3140000.serial to group 5 [ 0.720660] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.720858] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.720875] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.720880] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.720885] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.720926] tegra-pmc: PMC Prod config success [ 0.721126] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.721139] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.721418] iommu: Adding device 3400000.sdhci to group 6 [ 0.721829] iommu: Adding device 3210000.spi to group 7 [ 0.722181] iommu: Adding device 3230000.spi to group 8 [ 0.722502] iommu: Adding device 3270000.spi to group 9 [ 0.723306] iommu: Adding device 3160000.i2c to group 10 [ 0.723667] iommu: Adding device c240000.i2c to group 11 [ 0.724002] iommu: Adding device 3180000.i2c to group 12 [ 0.724343] iommu: Adding device 3190000.i2c to group 13 [ 0.724835] iommu: Adding device 31b0000.i2c to group 14 [ 0.725165] iommu: Adding device 31c0000.i2c to group 15 [ 0.725493] iommu: Adding device c250000.i2c to group 16 [ 0.725828] iommu: Adding device 31e0000.i2c to group 17 [ 0.726308] iommu: Adding device sound to group 18 [ 0.726803] iommu: Adding device 3510000.hda to group 19 [ 0.727272] iommu: Adding device bc00000.rtcpu to group 20 [ 0.729275] iommu: Adding device 13e10000.host1x to group 21 [ 0.729675] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.729984] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.730310] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.730701] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.731008] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.731321] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.731679] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.731989] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.732498] iommu: Adding device 15340000.vic to group 30 [ 0.732844] iommu: Adding device 15380000.nvjpg to group 31 [ 0.733084] iommu: Adding device 15500000.tsec to group 32 [ 0.733341] iommu: Adding device 15100000.tsecb to group 33 [ 0.733647] iommu: Adding device 15480000.nvdec to group 34 [ 0.733871] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.734104] iommu: Adding device 154c0000.nvenc to group 36 [ 0.734372] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.735042] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.735414] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.735908] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.739952] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.740036] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.740572] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.740627] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.742677] iommu: Adding device 15c10000.vi to group 42 [ 0.742817] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.743316] iommu: Adding device 14800000.isp to group 43 [ 0.744131] iommu: Adding device 16000000.pva0 to group 44 [ 0.744582] iommu: Adding device 16800000.pva1 to group 45 [ 0.744916] iommu: Adding device 15810000.se to group 46 [ 0.745234] iommu: Adding device 15820000.se to group 47 [ 0.745461] iommu: Adding device 15830000.se to group 48 [ 0.745698] iommu: Adding device 15840000.se to group 49 [ 0.745917] iommu: Adding device c1a0000.aon to group 50 [ 0.747484] iommu: Adding device d000000.bpmp to group 51 [ 0.747842] bpmp: ping status is 0 [ 0.747996] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.751219] bpmp d000000.bpmp: probe ok [ 0.753034] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.753459] iommu: Adding device smmu_test to group 52 [ 0.754369] mc: mapped MMIO address: 0xffffff800a590000 -> 0x2c10000 [ 0.754387] mc: mapped MMIO address: 0xffffff800a5b0000 -> 0x2c20000 [ 0.754402] mc: mapped MMIO address: 0xffffff800a5d0000 -> 0x2c30000 [ 0.754418] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.754433] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.754449] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2b80000 [ 0.754464] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b90000 [ 0.754478] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2ba0000 [ 0.754493] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2bb0000 [ 0.754507] mc: mapped MMIO address: 0xffffff800b090000 -> 0x1700000 [ 0.754521] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1710000 [ 0.754542] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1720000 [ 0.754557] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1730000 [ 0.754571] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1740000 [ 0.754605] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1750000 [ 0.754620] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1760000 [ 0.754634] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1770000 [ 0.754728] mc-err: mcerr ops are set to t19x [ 0.760217] iommu: Adding device 2600000.dma to group 53 [ 0.765288] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.766611] GPIO line 339 (wifi-enable) hogged as output/high [ 0.766653] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.766691] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.766973] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.772166] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.772238] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.772274] GPIO line 266 (w-disable1) hogged as output/high [ 0.772306] GPIO line 264 (w-disable2) hogged as output/high [ 0.772339] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.772573] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.774273] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.774284] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.774295] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.774959] iommu: Adding device 3550000.xudc to group 54 [ 0.775586] iommu: Adding device 3610000.xhci to group 55 [ 0.777567] arm64_ras arm64_ras: probed [ 0.777921] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.777966] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.778049] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.778125] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.778207] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.778284] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.778472] carmel_ras_enable: RAS enabled on cpu0 [ 0.778647] carmel_ras_enable: RAS enabled on cpu1 [ 0.778859] carmel_ras_enable: RAS enabled on cpu2 [ 0.779066] carmel_ras_enable: RAS enabled on cpu3 [ 0.779285] carmel_ras_enable: RAS enabled on cpu4 [ 0.779475] carmel_ras_enable: RAS enabled on cpu5 [ 0.779551] carmel_ras carmel_ras: probed [ 0.780574] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.781025] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.781678] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.782416] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.783087] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.783460] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.784572] vdd-ac-bat: 5000 mV [ 0.784940] vdd-sdmmc1-sw: 3300 mV [ 0.785205] vdd-1v8-sd: 1800 mV [ 0.785456] vdd-3v3-cvb: 3300 mV [ 0.785730] vdd-1v8-cvb: 1800 mV [ 0.786036] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.786080] vdd-epb-1v0: 1000 mV [ 0.786402] avdd-cam-2v8: 2800 mV [ 0.786675] vdd-fan: 5000 mV [ 0.786918] vdd-hdmi-5v0: 5000 mV [ 0.787160] vdd_sys_en: 1200 mV [ 0.820621] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.825207] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.825499] SCSI subsystem initialized [ 0.825747] libata version 3.00 loaded. [ 0.825978] usbcore: registered new interface driver usbfs [ 0.826030] usbcore: registered new interface driver hub [ 0.826131] usbcore: registered new device driver usb [ 0.837082] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.839860] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.847949] vdd-1v0: at 1000 mV [ 0.851921] vdd-1v8-hs: at 1800 mV [ 0.855938] vdd-1v8-ls: at 1800 mV [ 0.860016] vdd-1v8-ao: at 1800 mV [ 0.864007] vddio-ddr-1v1: at 1100 mV [ 0.867803] vdd-rtc: at 800 mV [ 0.868834] spmic-ldo1: at 2375 mV [ 0.875850] vdd-ao-3v3: at 3300 mV [ 0.883901] vddio-emmc-3v3: at 3300 mV [ 0.885082] spmic-ldo4: at 1587 mV [ 0.891919] vdd-usb-3v3: at 3300 mV [ 0.899979] vddio-sdmmc1-3v3: at 3300 mV [ 0.903973] vdd-csi-1v2: at 1200 mV [ 0.904997] spmic-ldo8: at 1800 mV [ 0.909004] GPIO line 246 (gpio_default) hogged as output/high [ 0.909988] GPIO line 247 (gpio_default) hogged as output/high [ 0.910268] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.910532] max77620 4-003c: max77620 probe successful [ 0.911017] media: Linux media interface: v0.10 [ 0.911104] Linux video capture interface: v2.00 [ 0.912549] pps_core: LinuxPPS API ver. 1 registered [ 0.912579] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.912687] PTP clock support registered [ 0.913027] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.913266] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.913296] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.915569] trusty trusty: trusty version: Built: 08:40:57 Feb 19 2021 [ 0.915631] trusty trusty: selected api version: 3 (requested 3) [ 0.916440] Advanced Linux Sound Architecture Driver Initialized. [ 0.916799] Bluetooth: Core ver 2.22 [ 0.916840] NET: Registered protocol family 31 [ 0.916849] Bluetooth: HCI device and connection manager initialized [ 0.916862] Bluetooth: HCI socket layer initialized [ 0.916874] Bluetooth: L2CAP socket layer initialized [ 0.916899] Bluetooth: SCO socket layer initialized [ 0.918894] camchar: rtcpu character device driver loaded [ 0.919298] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.919404] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.920173] clocksource: Switched to clocksource arch_sys_counter [ 0.959255] VFS: Disk quotas dquot_6.6.0 [ 0.959350] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.959682] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.961014] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.961076] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.961300] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.961311] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.961332] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.961344] nvmap_page_pool_init: Total RAM pages: 1986120 [ 0.961355] nvmap_page_pool_init: nvmap page pool size: 248265 pages (969 MB) [ 0.961555] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.961992] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.963310] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 0.975035] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.975210] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.975380] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 0.975524] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 0.975665] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.976885] la/ptsa driver initialized. [ 0.977184] NET: Registered protocol family 2 [ 0.977975] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.978323] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.978951] TCP: Hash tables configured (established 65536 bind 65536) [ 0.979025] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.979158] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.979574] NET: Registered protocol family 1 [ 0.980269] RPC: Registered named UNIX socket transport module. [ 0.980275] RPC: Registered udp transport module. [ 0.980281] RPC: Registered tcp transport module. [ 0.980286] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.980298] PCI: CLS 0 bytes, default 64 [ 0.980503] Trying to unpack rootfs image as initramfs... [ 1.209394] rootfs image is not initramfs (read error); looks like an initrd [ 1.217598] Freeing initrd memory: 7064K [ 1.233931] host1x 13e10000.host1x: initialized [ 1.235547] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.239502] audit: initializing netlink subsys (disabled) [ 1.239549] audit: type=2000 audit(0.856:1): initialized [ 1.240270] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.247008] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.248005] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.248520] 9p: Installing v9fs 9p2000 file system support [ 1.253596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.253769] io scheduler noop registered [ 1.253954] io scheduler cfq registered (default) [ 1.257639] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.258740] random: fast init done [ 1.292891] iommu: Adding device 2993000.adsp to group 56 [ 1.343461] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.343626] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.355260] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.355666] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.356202] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.356597] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.356939] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.359350] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.359520] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.361979] tsec 15500000.tsec: initialized [ 1.363446] tsec 15100000.tsecb: initialized [ 1.366663] nvdec 15480000.nvdec: initialized [ 1.368998] nvdec 15140000.nvdec1: initialized [ 1.373827] falcon 15340000.vic: initialized [ 1.375565] falcon 15380000.nvjpg: initialized [ 1.377172] falcon 154c0000.nvenc: initialized [ 1.378920] falcon 15a80000.nvenc1: initialized [ 1.382528] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.385164] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.386573] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.387972] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.389344] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.390746] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.392227] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.393667] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.397184] t194-nvcsi 15a00000.nvcsi: initialized [ 1.402108] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.402373] scare-pigeon 14b00000.isp-thi: initialized [ 1.407864] pva 16000000.pva0: initialized [ 1.413323] pva 16800000.pva1: initialized [ 1.417840] nvdla 15880000.nvdla0: initialized [ 1.422251] nvdla 158c0000.nvdla1: initialized [ 1.423334] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.423349] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.423404] tegradccommon 15200000.dc_common: dma mapping done [ 1.423971] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.423980] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.424205] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.424234] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.424402] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.424409] tegra_cec 3960000.tegra_cec: probed [ 1.425003] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.425055] generic_infoframe_type: 0x87 [ 1.425158] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.425185] tegradc 15200000.nvdisplay: Display dc.ffffff800bd10000 registered with id=0 [ 1.429863] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s [ 1.429877] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz [ 1.429892] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.430112] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.430121] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.433049] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.433059] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.434635] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.435543] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.435553] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.435882] kfuse 3830000.kfuse: initialized [ 1.436410] tegradc 15200000.nvdisplay: probed [ 1.436876] Console: switching to colour frame buffer device 80x30 [ 1.436912] tegradc 15200000.nvdisplay: fb registered [ 1.437215] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.437637] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.437667] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.437751] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.437811] tegradc 15210000.nvdisplay: Display dc.ffffff800be90000 registered with id=1 [ 1.437971] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.437981] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.441634] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.443605] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.444683] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.445576] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.446414] console [ttyTCU0] enabled [ 1.446615] [drm] Initialized [ 1.447435] tegradc 15210000.nvdisplay: probed [ 1.447775] tegradc 15210000.nvdisplay: fb registered [ 1.460950] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.461073] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.461167] brd: module loaded [ 1.461200] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.463332] Parent Clock set for DC pll_d [ 1.468559] loop: module loaded [ 1.468692] tegra_profiler: version: 1.143, samples/io: 48/28 [ 1.468857] tegra_profiler: auth: init [ 1.469544] THERMAL EST: found 3 subdevs [ 1.469557] THERMAL EST num_resources: 0 [ 1.469564] [THERMAL EST subdev 0] [ 1.469572] [THERMAL EST subdev 1] [ 1.469580] [THERMAL EST subdev 2] [ 1.469594] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.469656] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.472021] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.472028] THERMAL EST: thz register success. [ 1.472384] THERMAL EST: end of probe, return err: 0 [ 1.472993] sd: No Scsi addr parsed to reserve index [ 1.473027] hisi_sas: driver version v1.6 [ 1.479416] dp lt: state 0 (Reset), pending_lt_evt 1 [ 1.479429] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 1.479443] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.481227] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.481247] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.481523] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.481544] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.481562] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.481578] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.481592] dp lt: tx_pu: 0x20 [ 1.482823] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.482831] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.482840] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.483043] 1 ofpart partitions found on MTD device spi6.0 [ 1.483052] Creating 1 MTD partitions on "spi6.0": [ 1.483072] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.484942] libphy: Fixed MDIO Bus: probed [ 1.486505] tun: Universal TUN/TAP device driver, 1.6 [ 1.486515] tun: (C) 1999-2004 Max Krasnyansky [ 1.487161] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.487171] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.487231] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.487239] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.487274] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.487298] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.487348] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.487353] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.504665] dp lt: CR not done [ 1.505175] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.505180] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.505185] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.505189] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.505193] dp lt: CR retry [ 1.505199] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.505214] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.505234] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.505247] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.505260] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.505274] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.505284] dp lt: tx_pu: 0x60 [ 1.528682] dp lt: CR not done [ 1.529172] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.529177] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.529182] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.529186] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.529190] dp lt: CR retry [ 1.529195] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.529232] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.529250] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.529263] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.529276] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.529288] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.529298] dp lt: tx_pu: 0x60 [ 1.552672] dp lt: CR done [ 1.552678] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.552686] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.577848] dp lt: CE done [ 1.577854] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.577933] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 1.577938] Extcon AUX0(DP): enable [ 1.577942] dp_audio switch 1 [ 1.578252] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.578258] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.680185] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.680195] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.688167] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.698385] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.731273] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.731835] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 15 eb a8 [ 1.731979] libphy: dwc_phy: probed [ 1.733781] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.733793] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.733802] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.733810] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.733818] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 1.733827] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.733832] tegradc 15210000.nvdisplay: blank - powerdown [ 1.734268] PPP generic driver version 2.4.2 [ 1.734696] PPP BSD Compression module registered [ 1.734701] PPP Deflate Compression module registered [ 1.734718] PPP MPPE Compression module registered [ 1.734722] NET: Registered protocol family 24 [ 1.734756] usbcore: registered new interface driver r8152 [ 1.734782] usbcore: registered new interface driver asix [ 1.734804] usbcore: registered new interface driver ax88179_178a [ 1.734854] usbcore: registered new interface driver cdc_ether [ 1.734874] usbcore: registered new interface driver net1080 [ 1.734892] usbcore: registered new interface driver cdc_subset [ 1.734923] usbcore: registered new interface driver zaurus [ 1.734949] usbcore: registered new interface driver cdc_ncm [ 1.735368] VFIO - User Level meta-driver version: 0.3 [ 1.736570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.736601] ehci-pci: EHCI PCI platform driver [ 1.736642] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.736650] ohci-pci: OHCI PCI platform driver [ 1.736685] ohci-platform: OHCI generic platform driver [ 1.741606] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.743581] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4c6c800 id [ 1.744261] usbcore: registered new interface driver uas [ 1.744340] usbcore: registered new interface driver usb-storage [ 1.744439] usbcore: registered new interface driver usbserial [ 1.746035] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release [ 1.746063] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.746076] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.746761] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.746795] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.747030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.747036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.747041] usb usb1: Product: xHCI Host Controller [ 1.747045] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.747049] usb usb1: SerialNumber: 3610000.xhci [ 1.747519] hub 1-0:1.0: USB hub found [ 1.747611] hub 1-0:1.0: 4 ports detected [ 1.748002] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.748012] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.748020] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.748347] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.748353] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.748357] usb usb2: Product: xHCI Host Controller [ 1.748362] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.748366] usb usb2: SerialNumber: 3610000.xhci [ 1.748736] hub 2-0:1.0: USB hub found [ 1.748773] hub 2-0:1.0: 4 ports detected [ 1.749475] Wake76 for irq=199 [ 1.749478] Wake77 for irq=199 [ 1.749480] Wake78 for irq=199 [ 1.749482] Wake79 for irq=199 [ 1.749485] Wake80 for irq=199 [ 1.749487] Wake81 for irq=199 [ 1.749489] Wake82 for irq=199 [ 1.749519] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.749524] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.750363] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.750458] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.751362] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.751371] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.751396] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.751630] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.752104] mousedev: PS/2 mouse device common for all mice [ 1.752193] usbcore: registered new interface driver xpad [ 1.767027] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.767034] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.767040] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.767049] dp lt: link training force disable [ 1.767053] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.782622] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 1.782626] Extcon AUX0(DP) disable [ 1.782629] dp_audio switch 0 [ 1.788307] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.788999] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.790418] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.790735] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.790774] tegradc 15210000.nvdisplay: unblank [ 1.792376] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.792662] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.792909] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.801603] Parent Clock set for DC pll_d [ 1.805918] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.815629] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1.815634] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1.815640] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.817337] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.817344] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.817625] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.817638] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.817649] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.817661] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.817670] dp lt: tx_pu: 0x20 [ 1.840678] dp lt: CR not done [ 1.841186] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.841190] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.841193] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.841196] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.841199] dp lt: CR retry [ 1.841202] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.841209] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.841226] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.841238] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.841272] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.841284] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.841292] dp lt: tx_pu: 0x60 [ 1.852567] usb usb2: usb_suspend_both: status 0 [ 1.864703] dp lt: CR not done [ 1.865198] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.865203] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.865206] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.865209] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.865211] dp lt: CR retry [ 1.865216] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.865224] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.865240] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.865252] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.865264] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.865275] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.865284] dp lt: tx_pu: 0x60 [ 1.886974] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.888520] Wake73 for irq=42 [ 1.888746] dp lt: CR done [ 1.888751] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.888759] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.889825] rtc rtc1: alarm rtc device [ 1.889839] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.889862] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.890056] i2c /dev entries driver [ 1.891899] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.892410] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.892417] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.892954] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.913796] dp lt: CE done [ 1.913802] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.913860] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 1.913863] Extcon AUX0(DP): enable [ 1.913866] dp_audio switch 1 [ 1.916443] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.916494] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.916587] imx219 9-0010: board setup failed [ 1.916654] imx219: probe of 9-0010 failed with error -121 [ 1.916997] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.924960] tegradc 15210000.nvdisplay: sync windows ret = 247 [ 1.925242] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.925252] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.925263] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.925298] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.925306] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 1.925314] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.925319] tegradc 15210000.nvdisplay: blank - powerdown [ 1.940343] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.940396] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.940523] imx219 10-0010: board setup failed [ 1.940613] imx219: probe of 10-0010 failed with error -121 [ 1.941586] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 1.947726] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 1.948102] FAN dev name: pwm-fan [ 1.948193] FAN:gpio request success. [ 1.948205] FAN: can't find tach_gpio [ 1.948218] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.948252] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.948459] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.948464] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.949269] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.949291] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 1.949317] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 1.949322] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 1.949326] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.949331] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.949335] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.949339] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.949344] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.949349] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.950114] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.950921] device-mapper: uevent: version 1.0.3 [ 1.951411] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.955001] tegra194_cpufreq_probe: platform driver Initialization: pass [ 1.955937] cpuidle: Initializing cpuidle driver [ 1.956655] sdhci: Secure Digital Host Controller Interface driver [ 1.956657] sdhci: Copyright(c) Pierre Ossman [ 1.956659] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.956933] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.958154] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.959197] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.959200] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.959204] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.959211] dp lt: link training force disable [ 1.959213] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.960748] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 246 [ 1.965568] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.966837] tegra-se-nvhost 15810000.se: initialized [ 1.967930] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.968707] tegra-se-nvhost 15820000.se: initialized [ 1.969876] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.970808] tegra-se-nvhost 15830000.se: initialized [ 1.971405] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.972324] tegra-se-nvhost 15840000.se: initialized [ 1.973449] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.973848] hidraw: raw HID events driver (C) Jiri Kosina [ 1.974130] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 1.974133] Extcon AUX0(DP) disable [ 1.974135] dp_audio switch 0 [ 1.974881] usbcore: registered new interface driver usbhid [ 1.974883] usbhid: USB HID core driver [ 1.976788] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.976864] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.977472] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.977579] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.977590] tegradc 15210000.nvdisplay: unblank [ 1.978555] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.978865] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.978979] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.980005] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 1.980716] Parent Clock set for DC pll_d [ 1.981160] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.981544] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.982121] denver_knobs_init:MTS_VERSION:51035886 [ 1.982276] tegra19x_actmon d230000.actmon: in actmon_register()... [ 1.983309] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.983664] t19x_cache tegra-cache: probed [ 1.985084] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.987075] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 1.987083] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 1.987552] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 1.987891] PLL_AON clock registered [ 1.990387] Clocks initialized successfully [ 1.992070] nvpmodel: initialized successfully [ 1.993108] trusty-virtio trusty:virtio: initializing [ 1.993317] trusty_ipc virtio0: vring0: va(pa) ffffffc1f222a000(0) qsz 32 notifyid 1 [ 1.993325] trusty_ipc virtio0: vring1: va(pa) ffffffc1e1de4000(0) qsz 32 notifyid 2 [ 1.993447] trusty-virtio trusty:virtio: initializing done [ 1.993629] trusty_ipc virtio0: is online [ 1.994402] tegra-hda 3510000.hda: Override SDO lines to 4 [ 1.994818] usbcore: registered new interface driver snd-usb-audio [ 1.995209] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1.995213] dp lt: switching from state 4 (link training fail/disable) to state 1 (fast link training) [ 1.995217] dp lt: state 1 (fast link training), pending_lt_evt 0 [ 1.995235] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 1.995246] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 1.995262] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 1.995273] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 1.995281] dp lt: tx_pu: 0x60 [ 2.004043] dp lt: fast link training fail [ 2.004047] dp lt: switching from state 1 (fast link training) to state 0 (Reset) [ 2.004056] dp lt: state 0 (Reset), pending_lt_evt 0 [ 2.005984] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 2.005990] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.006236] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 2.006246] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 2.006255] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 2.006265] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 2.006274] dp lt: tx_pu: 0x20 [ 2.012269] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.012339] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.016594] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.016930] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.017176] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.017357] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.028671] dp lt: CR not done [ 2.029140] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 2.029142] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 2.029145] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 2.029147] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 2.029149] dp lt: CR retry [ 2.029153] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 2.029161] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.029176] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 2.029185] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 2.029194] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 2.029203] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 2.029212] dp lt: tx_pu: 0x60 [ 2.052674] dp lt: CR not done [ 2.053149] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 2.053152] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 2.053154] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 2.053156] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 2.053158] dp lt: CR retry [ 2.053162] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 2.053171] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.053186] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 2.053197] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 2.053225] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 2.053235] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 2.053242] dp lt: tx_pu: 0x60 [ 2.076192] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.076649] dp lt: CR done [ 2.076654] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 2.076660] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.101779] dp lt: CE done [ 2.101784] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 2.101837] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 2.101839] Extcon AUX0(DP): enable [ 2.101841] dp_audio switch 1 [ 2.106728] OPE platform probe [ 2.106836] OPE platform probe successful [ 2.112952] tegradc 15210000.nvdisplay: sync windows ret = 247 [ 2.113249] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 2.113252] Extcon DP: HPD enabled [ 2.113264] hpd: Display connected, hpd_switch 1 [ 2.113268] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 2.117961] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489 [ 2.117967] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.117972] usb 1-2: Product: 4-Port USB 2.0 Hub [ 2.117976] usb 1-2: Manufacturer: Generic [ 2.119144] hub 1-2:1.0: USB hub found [ 2.120228] hub 1-2:1.0: 4 ports detected [ 2.184725] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.184847] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.184963] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.185073] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.185168] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.185280] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.185377] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.185474] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.185577] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.185674] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.185777] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.185874] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.185966] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.186042] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.186121] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.186197] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.186286] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.186361] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.186436] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.186513] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.209481] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.213520] u32 classifier [ 2.213526] Actions configured [ 2.213597] Initializing XFRM netlink socket [ 2.214104] NET: Registered protocol family 10 [ 2.214955] NET: Registered protocol family 17 [ 2.214973] NET: Registered protocol family 15 [ 2.215023] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.215146] Bluetooth: RFCOMM socket layer initialized [ 2.215169] Bluetooth: RFCOMM ver 1.11 [ 2.215177] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.215186] Bluetooth: HIDP socket layer initialized [ 2.215203] 9pnet: Installing 9P2000 support [ 2.215249] Key type dns_resolver registered [ 2.215486] Registered cp15_barrier emulation handler [ 2.215508] Registered setend emulation handler [ 2.222748] registered taskstats version 1 [ 2.223218] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.224536] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.224572] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.224583] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.224593] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.233150] usb 2-3: new SuperSpeedPlus USB device number 2 using tegra-xusb [ 2.273798] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489 [ 2.273805] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.273810] usb 2-3: Product: 4-Port USB 3.0 Hub [ 2.273813] usb 2-3: Manufacturer: Generic [ 2.283628] hub 2-3:1.0: USB hub found [ 2.285186] hub 2-3:1.0: 4 ports detected [ 2.332216] tegra-pcie-dw 14160000.pcie: link is up [ 2.332451] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.332458] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.332466] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.332472] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.332479] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.332508] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.332680] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.332940] iommu: Adding device 0004:00:00.0 to group 58 [ 2.333348] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.333486] pci 0004:01:00.0: reg 0x10: [io 0x1000-0x10ff] [ 2.333687] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 2.334487] pci 0004:01:00.0: supports D1 D2 [ 2.334491] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.334817] iommu: Adding device 0004:01:00.0 to group 59 [ 2.345147] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.345153] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.345160] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 2.345260] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.345287] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.345292] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.345300] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.345323] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.345382] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.345614] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.345620] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.345627] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.345698] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.346283] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.347244] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.347261] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.347269] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.347276] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.352215] mmc0: hw tuning done ... [ 2.352276] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 2.352726] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 2.358427] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.388185] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.409271] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549 [ 2.409277] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.409282] usb 1-3: Product: Bluetooth Radio [ 2.409286] usb 1-3: Manufacturer: Realtek [ 2.409291] usb 1-3: SerialNumber: 00e04c000001 [ 2.456196] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.456201] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.832165] usb 1-2.1: new high-speed USB device number 4 using tegra-xusb [ 2.854004] usb 1-2.1: New USB device found, idVendor=2109, idProduct=2813 [ 2.854011] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.854017] usb 1-2.1: Product: USB2.0 Hub [ 2.854021] usb 1-2.1: Manufacturer: VIA Labs, Inc. [ 2.854981] hub 1-2.1:1.0: USB hub found [ 2.855839] hub 1-2.1:1.0: 4 ports detected [ 2.860368] tegra-pcie-dw 141a0000.pcie: link is down [ 2.860473] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.860480] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.860487] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 2.860493] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 2.860497] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.860524] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.860677] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.860869] iommu: Adding device 0005:00:00.0 to group 60 [ 2.861075] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.861097] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.861263] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.861269] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.861346] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.861479] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 2.861517] aer 0005:00:00.0:pcie002: unloading service driver aer [ 2.861594] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 2.861655] iommu: Removing device 0005:00:00.0 from group 60 [ 2.861677] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 2.863315] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 2.872595] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 2.879073] tegra194-isp5 14800000.isp: initialized [ 2.885683] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 2.892302] tegra194-vi5 15c10000.vi: initialized [ 2.896598] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 2.896666] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 2.896851] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 2.901382] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 2.901402] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 2.901433] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 2.901499] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 2.901536] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 2.901540] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 2.905663] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 2.905698] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 2.905703] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 2.906171] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 2.906216] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 2.906221] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 2.906612] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 2.906643] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 2.906647] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 2.906942] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 2.907709] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 2.948187] usb 1-2.3: new low-speed USB device number 5 using tegra-xusb [ 2.974235] usb 1-2.3: New USB device found, idVendor=045e, idProduct=07f8 [ 2.974242] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.974249] usb 1-2.3: Product: Wired Keyboard 600 [ 2.974254] usb 1-2.3: Manufacturer: Microsoft [ 2.977929] input: Microsoft Wired Keyboard 600 as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:045E:07F8.0001/input/input4 [ 2.992638] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 2.992972] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 2.993180] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 2.993387] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 2.993696] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 2.993815] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 2.994049] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 2.994053] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 2.995058] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda [ 2.995489] Wake83 for irq=211 [ 2.995561] gpio tegra-gpio wake67 for gpio=48(G:0) [ 2.995632] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 2.995736] input: gpio-keys as /devices/gpio-keys/input/input5 [ 3.037255] hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-3610000.xhci-2.3/input0 [ 3.040801] input: Microsoft Wired Keyboard 600 as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.1/0003:045E:07F8.0002/input/input6 [ 3.069286] tegra_rtc c2a0000.rtc: setting system clock to 2021-03-12 17:29:43 UTC (1615570183) [ 3.069745] mmcblk mmc0:aaaa: Card claimed for testing. [ 3.100213] usb 2-3.1: new SuperSpeed USB device number 3 using tegra-xusb [ 3.100611] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-3610000.xhci-2.3/input1 [ 3.103834] bpmp: mounted debugfs mirror [ 3.110066] ALSA device list: [ 3.110071] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 3.110074] #1: jetson-xaviernx-ape [ 3.110249] RAMDISK: gzip image found at block 0 [ 3.191903] RAMDISK: incomplete write (28583 != 29663) [ 3.192044] write error [ 3.205136] usb 2-3.1: New USB device found, idVendor=2109, idProduct=0813 [ 3.205144] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.205148] usb 2-3.1: Product: USB3.0 Hub [ 3.205167] usb 2-3.1: Manufacturer: VIA Labs, Inc. [ 3.208911] hub 2-3.1:1.0: USB hub found [ 3.209064] hub 2-3.1:1.0: 4 ports detected [ 3.225876] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.225913] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 3.229274] devtmpfs: mounted [ 3.231267] Freeing unused kernel memory: 8576K [ 3.296194] usb 1-2.1.3: new high-speed USB device number 6 using tegra-xusb [ 3.317581] usb 1-2.1.3: New USB device found, idVendor=2109, idProduct=2211 [ 3.317590] usb 1-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.317609] usb 1-2.1.3: Product: USB2.0 Hub [ 3.317613] usb 1-2.1.3: Manufacturer: VIA Labs, Inc. [ 3.318524] hub 1-2.1.3:1.0: USB hub found [ 3.318701] hub 1-2.1.3:1.0: 5 ports detected [ 3.396202] usb 1-2.4: new full-speed USB device number 7 using tegra-xusb [ 3.419791] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b [ 3.419798] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.419802] usb 1-2.4: Product: USB Receiver [ 3.419806] usb 1-2.4: Manufacturer: Logitech [ 3.436183] usb 2-3.1: usb_suspend_both: status 0 [ 3.492186] usb 2-3: usb_suspend_both: status 0 [ 3.492441] usb usb2: usb_suspend_both: status 0 [ 3.509775] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.514306] cgroup: cgroup2: unknown option "nsdelegate" [ 3.532204] usb 1-2.1.4: new full-speed USB device number 8 using tegra-xusb [ 3.536562] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.538304] systemd[1]: Detected architecture arm64. [ 3.544091] systemd[1]: Set hostname to . [ 3.566621] usb 1-2.1.4: not running at top speed; connect to a high speed hub [ 3.570062] usb 1-2.1.4: New USB device found, idVendor=2109, idProduct=0103 [ 3.570075] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.570080] usb 1-2.1.4: Product: USB 2.0 BILLBOARD [ 3.570084] usb 1-2.1.4: Manufacturer: VIA Inc. [ 3.570088] usb 1-2.1.4: SerialNumber: 0000000000000001 [ 3.767063] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.767077] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.968883] random: systemd: uninitialized urandom read (16 bytes read) [ 3.969152] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.969233] random: systemd: uninitialized urandom read (16 bytes read) [ 3.969252] systemd[1]: Reached target Swap. [ 3.969337] random: systemd: uninitialized urandom read (16 bytes read) [ 3.971812] systemd[1]: Created slice System Slice. [ 3.972051] systemd[1]: Listening on udev Kernel Socket. [ 3.973255] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 3.998924] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.036196] usb 1-2.1.3.1: new full-speed USB device number 9 using tegra-xusb [ 4.058426] usb 1-2.1.3.1: New USB device found, idVendor=12d1, idProduct=1092 [ 4.058433] usb 1-2.1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.058437] usb 1-2.1.3.1: Product: HUAWEI GLASS CV10 [ 4.058441] usb 1-2.1.3.1: Manufacturer: HUAWEI [ 4.058445] usb 1-2.1.3.1: SerialNumber: 315C356D3535 [ 4.065001] hid-generic 0003:12D1:1092.0006: hidraw2: USB HID v1.11 Device [HUAWEI HUAWEI GLASS CV10] on usb-3610000.xhci-2.1.3.1/input3 [ 4.132829] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.146759] cpu-throttle-alert cooling device registered. [ 4.147060] gpu-throttle-alert cooling device registered. [ 4.147342] aux-throttle-alert cooling device registered. [ 4.192241] usb 1-2.1.3.2: new high-speed USB device number 10 using tegra-xusb [ 4.217301] usb 1-2.1.3.2: New USB device found, idVendor=12d1, idProduct=107e [ 4.217310] usb 1-2.1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.217314] usb 1-2.1.3.2: Product: HUAWEI GLASS HID [ 4.217318] usb 1-2.1.3.2: Manufacturer: HUAWEI [ 4.217322] usb 1-2.1.3.2: SerialNumber: 1 [ 4.223038] hid-generic 0003:12D1:107E.0007: hidraw3: USB HID v1.11 Device [HUAWEI HUAWEI GLASS HID] on usb-3610000.xhci-2.1.3.2/input3 [ 4.224458] input: HUAWEI HUAWEI GLASS HID as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1.3/1-2.1.3.2/1-2.1.3.2:1.4/0003:12D1:107E.0008/input/input7 [ 4.285132] hid-generic 0003:12D1:107E.0008: input,hidraw4: USB HID v1.11 Keyboard [HUAWEI HUAWEI GLASS HID] on usb-3610000.xhci-2.1.3.2/input4 [ 4.368179] usb 1-2.1.3.5: new high-speed USB device number 11 using tegra-xusb [ 4.388685] usb 1-2.1.3.5: New USB device found, idVendor=2109, idProduct=8888 [ 4.388693] usb 1-2.1.3.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.390760] hid-generic 0003:2109:8888.0009: hidraw5: USB HID v1.10 Device [HID 2109:8888] on usb-3610000.xhci-2.1.3.5/input0 [ 4.494135] systemd-journald[2376]: Received request to flush runtime journal from PID 1 [ 5.409461] using random self ethernet address [ 5.409608] using random host ethernet address [ 5.613946] random: crng init done [ 5.614053] random: 7 urandom warning(s) missed due to ratelimiting [ 5.764261] usbcore: registered new interface driver btusb [ 5.879232] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 5.879240] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 5.879243] rtk_btcoex: create workqueue [ 5.884437] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 5.884537] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 5.884542] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0 [ 5.884546] rtk_btusb: patch_add [ 5.884549] rtk_btusb: auto suspend is disabled [ 5.884554] rtk_btusb: pid = 0x3549 [ 5.884558] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 5.884568] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 5.888666] rtk_btusb: btusb_probe: done [ 5.888671] rtk_btusb: btusb_open start [ 5.888679] rtk_btusb: btusb_open hdev->promisc ==0 [ 5.888685] rtk_btusb: download_patch start [ 5.888690] rtk_btusb: chip type value: 0x73 [ 5.888695] rtk_btusb: HCI reset. [ 5.888829] usbcore: registered new interface driver rtk_btusb [ 5.892722] logitech-djreceiver 0003:046D:C52B.0005: hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-3610000.xhci-2.4/input2 [ 5.899438] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 5.899445] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 5.899449] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 5.899453] rtk_btusb: load_firmware start [ 5.899456] rtk_btusb: lmp_version = 0x8822 [ 5.899460] rtk_btusb: config filename rtl8822cu_config [ 6.210810] rtk_btusb: no bdaddr file /opt/bdaddr [ 6.210818] rtk_btusb: 55 ab 23 87 00 00 [ 6.210829] rtk_btusb: Config file length 6, new length 6 [ 6.210832] rtk_btusb: fw name is rtl8822cu_fw [ 6.212611] rtk_btusb: This is not 8723a, use new patch style! [ 6.212618] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 6.213425] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 6.213431] rtk_btusb: load_firmware: New gEVersion 3 [ 6.213437] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 6.213442] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 6.213455] rtk_btusb: fw_version = 0x98a42f7 [ 6.213458] rtk_btusb: number_of_total_patch = 3 [ 6.213461] rtk_btusb: chipID 4 [ 6.213464] rtk_btusb: patch_length 0x55f0 [ 6.213468] rtk_btusb: start_offset 0x00005d00 [ 6.213471] rtk_btusb: Svn version: 21761 [ 6.213475] rtk_btusb: Coexistence: BTCOEX_20190509-0d0d [ 6.213478] rtk_btusb: buf_len = 0x55f6 [ 6.213490] rtk_btusb: fw: exists, config file: exists [ 6.213493] rtk_btusb: load_firmware done [ 6.213513] rtk_btusb: download_data start [ 6.328440] rtk_btusb: download_data done [ 6.328448] rtk_btusb: HCI reset. [ 6.339452] rtk_btusb: read_ver_rsp->lmp_subver = 0x42f7 [ 6.339460] rtk_btusb: read_ver_rsp->hci_rev = 0x98a [ 6.339464] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 6.339478] rtk_btusb: Rtk patch end 0 [ 6.339483] rtk_btusb: btusb_open set HCI_RUNNING [ 6.339523] rtk_btcoex: Open BTCOEX [ 6.339527] rtk_btusb: btusb_open end [ 6.341460] rtk_btcoex: BTCOEX hci_rev 0x098a [ 6.341483] rtk_btcoex: BTCOEX lmp_subver 0x42f7 [ 6.361465] rtk_btusb: btusb_notify: hci0 evt 3 [ 6.543253] input: Logitech MX Anywhere 2S as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:406A.000A/input/input8 [ 6.544225] logitech-hidpp-device 0003:046D:406A.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech MX Anywhere 2S] on usb-3610000.xhci-2.4:1 [ 6.570529] input: Logitech MX Master 2S as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:4069.000B/input/input9 [ 6.571802] logitech-hidpp-device 0003:046D:4069.000B: input,hidraw8: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-3610000.xhci-2.4:2 [ 6.618748] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.618765] Bluetooth: BNEP socket layer initialized [ 6.855783] Mass Storage Function, version: 2009/09/11 [ 6.855792] LUN: removable file: (no medium) [ 6.864729] using random self ethernet address [ 6.864859] using random host ethernet address [ 7.194231] rndis0: HOST MAC 42:2e:4d:57:eb:a8 [ 7.194333] rndis0: MAC 42:2e:4d:57:eb:a9 [ 7.194906] usb0: HOST MAC 42:2e:4d:57:eb:aa [ 7.194939] usb0: MAC 42:2e:4d:57:eb:ab [ 7.194960] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.195607] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.195662] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.195711] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.196032] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.196046] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.196581] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.196597] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.196815] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.203048] l4tbr0: port 1(rndis0) entered blocking state [ 7.203055] l4tbr0: port 1(rndis0) entered disabled state [ 7.203294] device rndis0 entered promiscuous mode [ 7.215284] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.220398] l4tbr0: port 2(usb0) entered blocking state [ 7.220405] l4tbr0: port 2(usb0) entered disabled state [ 7.220619] device usb0 entered promiscuous mode [ 7.226298] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.293357] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 7.426263] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.634883] zram: Added device: zram0 [ 7.636895] zram: Added device: zram1 [ 7.640428] zram: Added device: zram2 [ 7.644634] zram: Added device: zram3 [ 7.648228] zram: Added device: zram4 [ 7.651068] zram: Added device: zram5 [ 7.701547] zram0: detected capacity change from 0 to 679264256 [ 7.741158] gpio tegra-gpio wake20 for gpio=52(G:4) [ 7.756307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.780577] Adding 663340k swap on /dev/zram0. Priority:5 extents:1 across:663340k SS [ 7.789864] zram1: detected capacity change from 0 to 679264256 [ 7.805367] Adding 663340k swap on /dev/zram1. Priority:5 extents:1 across:663340k SS [ 7.808108] zram2: detected capacity change from 0 to 679264256 [ 7.830630] Adding 663340k swap on /dev/zram2. Priority:5 extents:1 across:663340k SS [ 7.835116] zram3: detected capacity change from 0 to 679264256 [ 7.851741] Adding 663340k swap on /dev/zram3. Priority:5 extents:1 across:663340k SS [ 7.858960] zram4: detected capacity change from 0 to 679264256 [ 7.886117] Adding 663340k swap on /dev/zram4. Priority:5 extents:1 across:663340k SS [ 7.888914] zram5: detected capacity change from 0 to 679264256 [ 7.917021] Adding 663340k swap on /dev/zram5. Priority:5 extents:1 across:663340k SS [ 8.049261] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.349227] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.479395] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.464465] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.464489] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.464506] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 9.464522] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.464537] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 9.464553] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.582278] tegradc 15210000.nvdisplay: unblank [ 9.582292] tegradc 15200000.nvdisplay: blank - powerdown [ 11.273461] fuse init (API version 7.26) [ 12.774508] ------------[ cut here ]------------ [ 12.774726] WARNING: CPU: 1 PID: 6460 at /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/net/wireless/nl80211.c:14141 cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 12.774974] Modules linked in: fuse zram overlay bnep hid_logitech_hidpp hid_logitech_dj rtk_btusb rtl8822ce btusb cfg80211 btrtl btbcm btintel spidev binfmt_misc userspace_alert nvgpu bluedroid_pm ip_tables x_tables [ 12.775075] CPU: 1 PID: 6460 Comm: RTW_CMD_THREAD Not tainted 4.9.201-tegra #1 [ 12.775081] Hardware name: NVIDIA Jetson Xavier NX Developer Kit (DT) [ 12.775089] task: ffffffc1f5bec600 task.stack: ffffffc1c6fb4000 [ 12.775175] PC is at cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 12.775781] LR is at rtw_cfg80211_ch_switch_notify+0x94/0x98 [rtl8822ce] [ 12.775787] pc : [] lr : [] pstate: 60c00045 [ 12.775791] sp : ffffffc1c6fb7c20 [ 12.775796] x29: ffffffc1c6fb7c20 x28: ffffff80012da760 [ 12.775809] x27: ffffff800db821bc x26: ffffff800149f578 [ 12.775820] x25: ffffff800152313c x24: ffffffc1d9ad4000 [ 12.775832] x23: ffffffc1d2700000 x22: ffffffc1d26f5000 [ 12.775843] x21: 0000000000000001 x20: ffffffc1c6fb7ca8 [ 12.775854] x19: ffffffc1f4eb0400 x18: 0000007fa60afa70 [ 12.775866] x17: 0000007fa602c258 x16: ffffff80082b17e0 [ 12.775877] x15: 0000000000000000 x14: 0000000000000008 [ 12.775889] x13: 7f1101c7fffc0000 x12: 0005c00363fffa03 [ 12.775900] x11: 0000000000000004 x10: 0000000000000002 [ 12.775912] x9 : 0000000000000004 x8 : ffffffc1c6fb7d3a [ 12.775923] x7 : 0000000000000000 x6 : 0000000000000001 [ 12.775935] x5 : 0000000000000040 x4 : 00000000000009b4 [ 12.775946] x3 : 0000144600000002 x2 : ffffffc1d26f6848 [ 12.775958] x1 : 0000144600000002 x0 : 0000000000000000 [ 12.775974] ---[ end trace 17a215191aeb99dd ]--- [ 12.776096] Call trace: [ 12.776183] [] cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 12.776772] [] rtw_cfg80211_ch_switch_notify+0x94/0x98 [rtl8822ce] [ 12.777341] [] rtw_chk_start_clnt_join+0x43c/0x4d8 [rtl8822ce] [ 12.777908] [] join_cmd_hdl+0x238/0x330 [rtl8822ce] [ 12.778470] [] rtw_cmd_thread+0x308/0x608 [rtl8822ce] [ 12.778482] [] kthread+0xec/0xf0 [ 12.778491] [] ret_from_fork+0x10/0x30 [ 12.924807] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 15.968613] tegradc 15200000.nvdisplay: blank - powerdown [ 15.968631] tegradc 15210000.nvdisplay: blank - powerdown [ 16.013084] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 16.013089] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 16.013094] dp lt: state 0 (Reset), pending_lt_evt 0 [ 16.013102] dp lt: link training force disable [ 16.013107] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 16.028864] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 16.030558] Extcon AUX0(DP) disable [ 16.030565] dp_audio switch 0 [ 16.032962] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 16.033052] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 16.035842] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 16.079194] tegradc 15210000.nvdisplay: blank - powerdown [ 16.079228] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 16.079250] tegradc 15210000.nvdisplay: unblank [ 16.080276] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 16.080395] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 16.080499] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 16.082479] Parent Clock set for DC pll_d [ 16.086982] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 16.100833] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 16.100839] dp lt: switching from state 4 (link training fail/disable) to state 1 (fast link training) [ 16.100846] dp lt: state 1 (fast link training), pending_lt_evt 0 [ 16.100862] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 16.100873] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 16.100884] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 16.100895] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 16.100904] dp lt: tx_pu: 0x60 [ 16.105408] dp lt: fast link training fail [ 16.105414] dp lt: switching from state 1 (fast link training) to state 0 (Reset) [ 16.105425] dp lt: state 0 (Reset), pending_lt_evt 0 [ 16.107077] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 16.107086] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 16.107340] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 16.107351] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 16.107362] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 16.107373] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 16.107381] dp lt: tx_pu: 0x20 [ 16.128709] dp lt: CR not done [ 16.129257] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 16.129263] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 16.129266] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 16.129268] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 16.129271] dp lt: CR retry [ 16.129277] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 16.129368] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 16.129388] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 16.129400] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 16.129411] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 16.129422] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 16.129431] dp lt: tx_pu: 0x60 [ 16.152750] dp lt: CR not done [ 16.153240] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 16.153244] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 16.153247] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 16.153249] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 16.153252] dp lt: CR retry [ 16.153259] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 16.153270] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 16.153288] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 16.153299] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 16.153310] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 16.153321] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 16.153330] dp lt: tx_pu: 0x60 [ 16.176751] dp lt: CR done [ 16.176786] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 16.176796] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 16.201821] dp lt: CE done [ 16.201829] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 16.202936] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 16.202940] Extcon AUX0(DP): enable [ 16.202945] dp_audio switch 1 [ 16.203077] tegradc 15210000.nvdisplay: unblank [ 16.203168] tegradc 15200000.nvdisplay: blank - powerdown [ 34.136397] vdd-1v8-sd: disabling [ 34.136437] vdd-1v8-cvb: disabling [ 34.136443] vdd-epb-1v0: disabling [ 34.136448] avdd-cam-2v8: disabling [ 34.136454] vdd-fan: disabling [ 34.136460] vdd_sys_en: disabling [ 48.608080] usb 1-2.3: USB disconnect, device number 5 [ 95.111688] tegradc 15200000.nvdisplay: blank - powerdown [ 95.111703] tegradc 15210000.nvdisplay: blank - powerdown [ 95.146760] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 95.146765] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 95.146770] dp lt: state 0 (Reset), pending_lt_evt 0 [ 95.146779] dp lt: link training force disable [ 95.146783] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 95.162172] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 95.162176] Extcon AUX0(DP) disable [ 95.162180] dp_audio switch 0 [ 95.163930] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 95.164090] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 95.164832] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 95.190529] tegradc 15200000.nvdisplay: blank - powerdown [ 113.120747] tegradc 15210000.nvdisplay: blank - powerdown [ 265.749689] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 287.484153] tegradc 15210000.nvdisplay: unblank [ 287.486728] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 287.487135] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 287.487380] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 287.496147] Parent Clock set for DC pll_d [ 287.500791] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 287.513899] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 287.513905] dp lt: switching from state 4 (link training fail/disable) to state 1 (fast link training) [ 287.513913] dp lt: state 1 (fast link training), pending_lt_evt 0 [ 287.513927] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 287.513936] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 287.513946] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 287.513955] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 287.513963] dp lt: tx_pu: 0x60 [ 287.518275] dp lt: fast link training fail [ 287.518280] dp lt: switching from state 1 (fast link training) to state 0 (Reset) [ 287.518286] dp lt: state 0 (Reset), pending_lt_evt 0 [ 287.520073] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 287.520079] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 287.520320] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 287.520328] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 287.520337] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 287.520345] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 287.520351] dp lt: tx_pu: 0x20 [ 287.542866] dp lt: CR not done [ 287.543343] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 287.543347] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 287.543349] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 287.543352] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 287.543355] dp lt: CR retry [ 287.543360] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 287.543367] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 287.543381] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 287.543390] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 287.543399] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 287.543436] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 287.543443] dp lt: tx_pu: 0x60 [ 287.566850] dp lt: CR not done [ 287.567325] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 287.567328] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 287.567331] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 287.567334] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 287.567336] dp lt: CR retry [ 287.567340] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 287.567347] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 287.567364] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 287.567374] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 287.567383] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 287.567420] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 287.567426] dp lt: tx_pu: 0x60 [ 287.590841] dp lt: CR done [ 287.590846] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 287.590853] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 287.615966] dp lt: CE done [ 287.615972] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 287.616146] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 287.616150] Extcon AUX0(DP): enable [ 287.616153] dp_audio switch 1 [ 287.630328] tegradc 15210000.nvdisplay: sync windows ret = 247 [ 430.977016] tegradc 15210000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 438.262304] FAN rising trip_level:1 cur_temp:46150 trip_temps[2]:60000 root@hacksmith-jetson:/home/hacksmith#