▒▒ [0000.062] I> MB1 (version: 0.23.0.0-t234-54845784-92215740) [0000.068] I> t234-A01-0-Silicon (0x12347) Prod [0000.072] I> Boot-mode : Coldboot [0000.075] I> Emulation: [0000.077] I> Entry timestamp: 0x00000000 [0000.081] I> last_boot_error: 0x0 [0000.084] I> BR-BCT: preprod_dev_sign: 0 [0000.088] I> rst_source: 0x0, rst_level: 0x0 [0000.092] I> Task: CRC check (0x5001cf71) [0000.096] I> Skip CRC check as records_integrity fuse is not burned [0000.102] I> Task: Crypto init (0x5001c0d9) [0000.106] I> Task: Secure debug controls (0x5000cb19) [0000.111] I> Task: strap war set (0x5000b739) [0000.115] I> strap value(0x4000401) set to 0x4000401 [0000.120] I> Task: Initialize SOC Therm (0x5001a509) [0000.125] I> Task: Program NV master stream id (0x5000cad1) [0000.130] I> Task: Verify boot mode (0xd482021) [0000.136] I> Task: Alias fuses (0x50010749) [0000.141] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.148] I> Task: Print SKU type (0x5000fba9) [0000.153] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c0 [0000.158] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.162] I> FUSE_OPT_TPC_DISABLE = 0x00000080 [0000.166] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.171] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.175] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.179] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.183] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.187] I> FUSE_SKU_INFO_0 = 0xd2 [0000.191] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.195] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.198] I> SKU: Prod [0000.200] I> Task: Boost clocks (0x50013db1) [0000.205] I> Initializing PLLC2 for AXI_CBB. [0000.209] I> AXI_CBB : src = 35, divisor = 0 [0000.213] I> Task: Voltage monitor (0x50013dbd) [0000.217] I> VMON: Vmon re-calibration and fine tuning done [0000.223] I> Task: UPHY init (0x5000da39) [0000.227] E> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.232] I> Task: Boot device init (0x50000a3d) [0000.237] I> Boot_device: QSPI_FLASH instance: 0 [0000.241] I> Qspi clock source : pllc_out0 [0000.245] I> QSPI Flash: Macronix 64MB [0000.249] I> QSPI-0l initialized successfully [0000.253] I> Task: TSC init (0x5001ed35) [0000.257] I> Task: Load membct (0x5001190d) [0000.261] I> RAM_CODE 0x4000401 [0000.264] I> Loading MEM-BCT to SysRAM [0000.268] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.273] I> Slot: 0 [0000.275] I> Binary[0] block-0 (partition size: 0x40000) [0000.280] I> get_binary_info: Binary name: MEM-BCT-0 [0000.285] I> Size of crypto header is 8192 [0000.289] I> BCH load address is : 0x40050000 [0000.293] I> Size of crypto header is 8192 [0000.297] I> BCH of MEM-BCT-0 read from storage [0000.302] I> BCH address is : 0x40050000 [0000.306] I> MEM-BCT-0 header integrity check is success [0000.311] I> Binary magic in BCH component 0 is MEM0 [0000.316] I> component binary type is 0 [0000.320] I> MEM-BCT-0 binary is read from storage [0000.325] I> MEM-BCT-0 binary integrity check is success [0000.330] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.337] I> RAM_CODE 0x4000401 [0000.342] I> RAM_CODE 0x4000401 [0000.346] I> Task: Load Page retirement list (0x50011139) [0000.351] I> Task: SDRAM params override (0x50011b79) [0000.356] I> Task: Save mem-bct info (0x50014071) [0000.360] I> Task: Carveout allocate (0x500140d5) [0000.365] I> RCM blob carveout will not be allocated [0000.370] I> ECC region[0]: Start:0x0, End:0x0 [0000.374] I> ECC region[1]: Start:0x0, End:0x0 [0000.378] I> ECC region[2]: Start:0x0, End:0x0 [0000.383] I> ECC region[3]: Start:0x0, End:0x0 [0000.387] I> ECC region[4]: Start:0x0, End:0x0 [0000.391] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.397] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.402] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.406] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.411] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.421] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.428] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.435] I> allocated(CO:39) base:0x83a000000 size:0x6000000 align: 0x200000 [0000.442] I> allocated(CO:20) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.449] I> allocated(CO:24) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.456] I> allocated(CO:28) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.463] I> allocated(CO:29) base:0x832000000 size:0x2000000 align: 0x2000000 [0000.470] I> allocated(CO:43) base:0x830000000 size:0x2000000 align: 0x200000 [0000.477] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.484] I> allocated(CO:41) base:0x82f000000 size:0x1000000 align: 0x100000 [0000.491] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.498] I> allocated(CO:03) base:0x82e800000 size:0x800000 align: 0x800000 [0000.505] I> allocated(CO:06) base:0x82e000000 size:0x800000 align: 0x800000 [0000.512] I> allocated(CO:10) base:0x82d800000 size:0x800000 align: 0x800000 [0000.519] I> allocated(CO:56) base:0x82d000000 size:0x800000 align: 0x200000 [0000.526] I> allocated(CO:07) base:0x82cc00000 size:0x400000 align: 0x400000 [0000.533] I> allocated(CO:33) base:0x82c800000 size:0x400000 align: 0x200000 [0000.540] I> allocated(CO:47) base:0x82c400000 size:0x400000 align: 0x200000 [0000.547] I> allocated(CO:72) base:0x82c200000 size:0x200000 align: 0x10000 [0000.554] I> allocated(CO:01) base:0x82c100000 size:0x100000 align: 0x100000 [0000.560] I> allocated(CO:04) base:0x82c000000 size:0x100000 align: 0x100000 [0000.567] I> allocated(CO:05) base:0x82bf00000 size:0x100000 align: 0x100000 [0000.574] I> allocated(CO:08) base:0x82be00000 size:0x100000 align: 0x100000 [0000.581] I> allocated(CO:09) base:0x82bd00000 size:0x100000 align: 0x100000 [0000.588] I> allocated(CO:15) base:0x82bc00000 size:0x100000 align: 0x100000 [0000.595] I> allocated(CO:17) base:0x82bb00000 size:0x100000 align: 0x100000 [0000.602] I> allocated(CO:23) base:0x82ba00000 size:0x100000 align: 0x100000 [0000.609] I> allocated(CO:27) base:0x82b900000 size:0x100000 align: 0x100000 [0000.616] I> allocated(CO:42) base:0x82b800000 size:0x100000 align: 0x100000 [0000.623] I> allocated(CO:54) base:0x82b780000 size:0x80000 align: 0x80000 [0000.630] I> allocated(CO:26) base:0x82b740000 size:0x40000 align: 0x2000 [0000.636] I> allocated(CO:48) base:0x82b720000 size:0x20000 align: 0x10000 [0000.643] I> allocated(CO:69) base:0x82b700000 size:0x20000 align: 0x10000 [0000.650] I> allocated(CO:34) base:0x82b6f0000 size:0x10000 align: 0x10000 [0000.656] I> allocated(CO:35) base:0x82b6e0000 size:0x10000 align: 0x10000 [0000.663] I> allocated(CO:49) base:0x82b6d0000 size:0x10000 align: 0x10000 [0000.670] I> allocated(CO:50) base:0x82b6c0000 size:0x10000 align: 0x10000 [0000.677] I> allocated(CO:52) base:0x82b6b0000 size:0x10000 align: 0x10000 [0000.683] I> Task: Thermal check (0x5001fba1) [0000.688] I> max_chip_limit = 115 [0000.691] I> min_chip_limit = -30 [0000.694] I> max temp read = 41 [0000.697] I> min temp read = 40 [0000.700] I> Task: Update FSI SCR with thermal fuse data (0x5001fc3d) [0000.706] I> Task: Enable WDT 5th expiry (0x5001f929) [0000.711] I> Task: Disable WDT globally (0x5001f965) [0000.716] I> Task: I2C register (0x50000a31) [0000.720] I> Task: Reset FSI (0x50013db9) [0000.724] I> Task: Pinmux init (0x50013219) [0000.728] I> Task: Prod config init (0x50013631) [0000.733] I> Task: Pad voltage init (0x500132a5) [0000.737] I> Task: Prod init (0x500136d5) [0000.741] I> Task: Common rail init (0x50013bd1) [0000.745] W> Thermal config not found in BCT [0000.750] W> Generic i2c config not found in BCT [0000.754] W> Platform rail config not found in BCT [0000.760] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.768] W> MEMIO rail config not found in BCT [0000.773] I> Task: Mem clock src (0x500119c5) [0000.777] I> Task: Misc. board config (0x50013c29) [0000.781] W> Platform config not found in BCT [0000.786] I> Task: SDRAM init (0x500119c9) [0000.792] I> SDRAM-params @ 0xd485000 [0000.796] I> MSS code-drop: NvBootSdramInit [0000.800] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [0000.807] I> MSS CAR: Init PLLM [0000.810] I> MSS CAR: Init PLLHUB [0000.815] I> Encryption: MTS: en, TX: dis, VPR: dis, GSC: en [0000.827] I> mb1_sdram_init Done ! [0000.830] I> SDRAM Size in Total 0x800000000 [0000.834] I> Task: Dram Ecc scrub (0x50011261) [0000.838] I> Task: DRAM alias check (0x50011b71) [0000.869] I> Task: Program NSDRAM carveout (0x50014921) [0000.876] I> NSDRAM carveout encryption is disabled [0000.881] I> Program NSDRAM carveout [0000.885] I> Task: Register checker (0x50011b75) [0000.894] I> Task: Enable clock-mon (0x5001ed25) [0000.910] I> FMON: Fmon re-programming done [0000.915] I> Task: Mapper init (0x5001d451) [0000.920] I> Task: SC7 Context Init (0x5001f02d) [0000.926] I> Task: CCPLEX IST init (0x5000d335) [0000.932] I> Task: CPU WP0 (0x5000c635) [0000.938] I> Loading MCE [0000.940] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.946] I> Slot: 0 [0000.948] I> Binary[8] block-0 (partition size: 0x80000) [0000.954] I> get_binary_info: Binary name: MCE [0000.959] I> Size of crypto header is 8192 [0000.964] I> BCH load address is : 0x4003e000 [0000.969] I> Size of crypto header is 8192 [0000.974] I> BCH of MCE read from storage [0000.978] I> BCH address is : 0x4003e000 [0000.984] I> MCE header integrity check is success [0000.989] I> Binary magic in BCH component 0 is MTSM [0000.994] I> component binary type is 8 [0000.998] I> Size of crypto header is 8192 [0001.004] I> MCE binary is read from storage [0001.010] I> MCE binary integrity check is success [0001.015] I> Binary MCE loaded successfully at 0x40000000 (0x2c080) [0001.023] I> Size of crypto header is 8192 [0001.037] I> Size of crypto header is 8192 [0001.042] I> Sending WP0 mailbox command to PSC [0001.052] I> Task: MB1 fixed firewalls (0x5001e55d) [0001.072] I> Task: Load bpmp-fw (0x5001e801) [0001.077] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.083] I> Slot: 0 [0001.085] I> Binary[15] block-0 (partition size: 0x180000) [0001.092] I> get_binary_info: Binary name: BPMP_FW [0001.097] I> Size of crypto header is 8192 [0001.101] I> BCH load address is : 0x807fe000 [0001.107] I> Size of crypto header is 8192 [0001.112] I> BCH of BPMP_FW read from storage [0001.116] I> BCH address is : 0x807fe000 [0001.122] I> BPMP_FW header integrity check is success [0001.127] I> Binary magic in BCH component 0 is BPMF [0001.133] I> component binary type is 15 [0001.137] I> Size of crypto header is 8192 [0001.152] I> BPMP_FW binary is read from storage [0001.159] I> BPMP_FW binary integrity check is success [0001.165] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfb3c0) [0001.173] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.179] I> Slot: 0 [0001.181] I> Binary[16] block-10000 (partition size: 0x400000) [0001.188] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.193] I> Size of crypto header is 8192 [0001.198] I> BCH load address is : 0x807fc000 [0001.203] I> Size of crypto header is 8192 [0001.208] I> BCH of BPMP_FW_DTB read from storage [0001.213] I> BCH address is : 0x807fc000 [0001.219] I> BPMP_FW_DTB header integrity check is success [0001.225] I> Binary magic in BCH component 0 is BPMD [0001.230] I> component binary type is 16 [0001.234] I> Size of crypto header is 8192 [0001.240] I> BPMP_FW_DTB binary is read from storage [0001.246] I> BPMP_FW_DTB binary integrity check is success [0001.252] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20440) [0001.261] I> Task: Load psc-fw (0x5001ea0d) [0001.267] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.273] I> Slot: 0 [0001.275] I> Binary[17] block-0 (partition size: 0xc0000) [0001.281] I> get_binary_info: Binary name: PSC_FW [0001.286] I> Size of crypto header is 8192 [0001.291] I> BCH load address is : 0x80ffe000 [0001.296] I> Size of crypto header is 8192 [0001.301] I> BCH of PSC_FW read from storage [0001.306] I> BCH address is : 0x80ffe000 [0001.311] I> PSC_FW header integrity check is success [0001.316] I> Binary magic in BCH component 0 is PFWP [0001.322] I> component binary type is 17 [0001.326] I> Size of crypto header is 8192 [0001.336] I> PSC_FW binary is read from storage [0001.342] I> PSC_FW binary integrity check is success [0001.347] I> Binary PSC_FW loaded successfully at 0x80000000 (0x7d000) [0001.356] I> Task: Load nvdec-fw (0x5001ea81) [0001.361] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.367] I> Slot: 0 [0001.370] I> Binary[7] block-0 (partition size: 0x100000) [0001.376] I> get_binary_info: Binary name: NVDEC [0001.381] I> Size of crypto header is 8192 [0001.385] I> BCH load address is : 0x800fe000 [0001.391] I> Size of crypto header is 8192 [0001.396] I> BCH of NVDEC read from storage [0001.400] I> BCH address is : 0x800fe000 [0001.406] I> NVDEC header integrity check is success [0001.411] I> Binary magic in BCH component 0 is NDEC [0001.416] I> component binary type is 7 [0001.420] I> Size of crypto header is 8192 [0001.427] I> NVDEC binary is read from storage [0001.433] I> NVDEC binary integrity check is success [0001.438] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.449] I> Task: Load tsec-fw (0x5001ec6d) [0001.454] I> TSEC-FW load support not enabled [0001.459] I> Task: Program misc carveouts (0x5001445d) [0001.465] I> Program IPC carveouts [0001.472] I> Task: GPIO interrupt map (0x50013cc5) [0001.478] I> Task: SC7 context save (0x5001f161) [0001.484] I> NV_SC7 Context addr: 0xa0000000 [0001.490] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.495] I> Slot: 0 [0001.498] I> Binary[27] block-0 (partition size: 0x100000) [0001.504] I> get_binary_info: Binary name: BR_BCT [0001.509] I> Size of crypto header is 8192 [0001.514] I> Size of crypto header is 8192 [0001.519] I> BR_BCT binary is read from storage [0001.524] I> BR_BCT binary integrity check is success [0001.529] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.537] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.543] I> Slot: 0 [0001.545] I> Binary[13] block-0 (partition size: 0x30000) [0001.551] I> get_binary_info: Binary name: SC7-FW [0001.556] I> Size of crypto header is 8192 [0001.561] I> Size of crypto header is 8192 [0001.566] I> BCH load address is : 0xa0002000 [0001.571] I> Size of crypto header is 8192 [0001.576] I> BCH of SC7-FW read from storage [0001.580] I> BCH address is : 0xa0002000 [0001.586] I> SC7-FW header integrity check is success [0001.591] I> Binary magic in BCH component 0 is WB0B [0001.597] I> component binary type is 13 [0001.601] I> Size of crypto header is 8192 [0001.607] I> SC7-FW binary is read from storage [0001.613] I> SC7-FW binary integrity check is success [0001.618] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x25460) [0001.626] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.632] I> Slot: 0 [0001.634] I> Binary[22] block-0 (partition size: 0x30000) [0001.640] I> get_binary_info: Binary name: PSC_RF [0001.646] I> Size of crypto header is 8192 [0001.650] I> Size of crypto header is 8192 [0001.655] I> BCH load address is : 0xa0029460 [0001.660] I> Size of crypto header is 8192 [0001.665] I> BCH of PSC_RF read from storage [0001.670] I> BCH address is : 0xa0029460 [0001.675] I> PSC_RF header integrity check is success [0001.681] I> Binary magic in BCH component 0 is PSCR [0001.686] I> component binary type is 22 [0001.690] I> Size of crypto header is 8192 [0001.696] I> PSC_RF binary is read from storage [0001.702] I> PSC_RF binary integrity check is success [0001.707] I> Binary PSC_RF loaded successfully at 0xa002b460 (0x1bd20) [0001.727] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.733] I> Slot: 0 [0001.735] I> Binary[14] block-0 (partition size: 0x20000) [0001.741] I> get_binary_info: Binary name: MB2_RF [0001.746] I> Size of crypto header is 8192 [0001.751] I> Size of crypto header is 8192 [0001.755] I> BCH load address is : 0xa008e240 [0001.761] I> Size of crypto header is 8192 [0001.766] I> BCH of MB2_RF read from storage [0001.770] I> BCH address is : 0xa008e240 [0001.776] I> MB2_RF header integrity check is success [0001.781] I> Binary magic in BCH component 0 is MB2R [0001.786] I> component binary type is 14 [0001.791] I> Size of crypto header is 8192 [0001.797] I> MB2_RF binary is read from storage [0001.802] I> MB2_RF binary integrity check is success [0001.807] I> Binary MB2_RF loaded successfully at 0xa0090240 (0x1bdc0) [0001.816] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.823] I> SC7 context fuse-bypass data is empty [0001.831] I> SC7 context save done [0001.835] I> Task: Load MB2/Applet/FSKP (0x5000d451) [0001.841] I> Loading MB2 [0001.844] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.850] I> Slot: 0 [0001.852] I> Binary[6] block-0 (partition size: 0x80000) [0001.858] I> get_binary_info: Binary name: MB2 [0001.863] I> Size of crypto header is 8192 [0001.868] I> BCH load address is : 0x8007e000 [0001.873] I> Size of crypto header is 8192 [0001.878] I> BCH of MB2 read from storage [0001.883] I> BCH address is : 0x8007e000 [0001.888] I> MB2 header integrity check is success [0001.893] I> Binary magic in BCH component 0 is MB2B [0001.898] I> component binary type is 6 [0001.903] I> Size of crypto header is 8192 [0001.912] I> MB2 binary is read from storage [0001.917] I> MB2 binary integrity check is success [0001.923] I> Binary MB2 loaded successfully at 0x80000000 (0x686c0) [0001.931] I> Task: Map CCPLEX SHARED carveout (0x5000d521) [0001.938] I> Task: Prepare MB2 params (0x5000d5dd) [0001.946] I> MB2-params @ 0x40060000 [0001.954] I> BR-BCT Boot Chain Fields [0001.958] I> u32_non_gpio_select_boot_chain : 0 [0001.963] I> u32_num_boot_chains : 2 [0001.968] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.974] I> Task: Dram ecc test (0x500112cd) [0001.980] I> Task: Misc NV security settings (0x5000ced5) [0001.986] I> NVDEC sticky bits programming done [0001.991] I> Task: Disable/Reload WDT (0x5001f991) [0001.997] I> Programmed SLCG global override := 0x0 [0002.002] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-e33bc3dc) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f1de3 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x82d000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e6c) I> Task: Enable hot-plug capability (0x50020e7c) I> Task: PSC mailbox init (0x50011ed0) I> Task: Crypto init (0x5000513c) I> Task: Enable GP-SE clock (0x50001fd0) I> Task: I2C register (0x50001e30) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e18) I> Task: Boot device init (0x50001d60) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d5c) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x50017428) I> Task: Load AUXP FWs (0x50020a1c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82be00000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82bb00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x838000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9477920 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x838000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82cc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82bf00000 I> Task: Carveout setup (0x50019c94) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50011da4) I> Task: Enable FSI VMON (0x50011944) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x5001199c) I> FSITHERM max temp = 42 I> FSITHERM min temp = 40 I> Task: Restore XUSB sec (0x50001d30) I> Task: Enable FSI SE clock (0x5001232c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f34) I> Task: Initialize CPUBL Params (0x50013384) I> CPUBL-params @ 0x834000000 I> Task: Prepare eeprom data (0x50013140) I> Task: OEM firewalls (0x5001df14) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> OEM firewalls configured I> Task: Unhalt AUXPs (0x50020c84) I> Unhalting SPE.. I> Enabling combined UART ▒▒▒▒spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 2e3d77fae66a40ac8e7a91531ae7d9b3 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ▒▒ I> Task: Trigger mailbox for PSC-BL1 exit (0x50011f50) I> Sending opcode 0x4d420802 to psc ▒▒INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848000000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: e061f86-9e1f578-2508c43-dev-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ▒▒I> Received ACK from psc I> Task: Sta▒▒INFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 ▒▒ ▒▒rt secure NOR provision (0x50014924) I> Task: Load FSI keyblob (0x50012368) I> Skipping FSI key blob copy I> Task: Unhalt AUXPs (0x50020c8c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x5001347c) I> Task: Load TOS (0x50013b38) I> Task: Load and authenticate registered FWs (0x50017428) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu-bo▒▒[ 2.385618] Camera-FW on t234-rce-safe started TCU early console enabled. ▒▒bpmp: init bpmp: bas▒▒INFO: MONITOR: popula▒▒e binary md5 is eac380526d68ff45ffc86d0feae98e88 bpmp: combined binary md5 is▒▒ted user images:19 INFO: mret to Supervisor! INFO: psc supervisor init. INF▒▒ 888a114dda6bea50b6c6bb224445ac85 bpmp: firmware tag is 888a114dda6bea50b6c6-eac380526d6 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_popu▒▒O: psc_irq_init... INFO: enter idle task. ▒▒late_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized thermal initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ▒▒ ▒▒otloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (part▒▒initialized avfs_clk_platform initialized powergate ▒▒ition size: 0x380000), name: A_cpu-bootloader ▒▒initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy ▒▒I> Scr▒▒initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq initialized mce_dbell missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ▒▒atch RSV109: 0x00000001 active chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name▒▒initialized clk_cal_late initialized noc_late initialized dmce initialized cvc ▒▒: A_secure-os I> MB2-params @▒▒initialized avfs_clk_mach_post initialized pm_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable adspneon enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable nvdec enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable▒▒[ 2.621992] Camera-FW on t234-rce-safe ready SHA1=7a10e461 (crt 13.247 ms,▒▒ dsi_lp ▒▒ total boot 258.941 ms) ▒▒enable sdmmc_legacy_tm initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized extras_post bpmp: init complete ▒▒ 0x40060000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x82c400000 ▒▒DCE: FW Boot Done ▒▒I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x831e06000 I> Relocating OP-TEE dtb from: 0x831eff700 to 0x82b700000, size: 0x996 I> [0] START: 0x80000000, SIZE: 0x7ab600000 I> [1] START: 0x82c400000, SIZE: 0x400000 I> [2] START: 0x82d000000, SIZE: 0x800000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x82d000400 I> EKB detected (length: 0x410) @ VA:0x82d000400 I> Task: Prepare TOS params (0x50013ab0) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82b700000 I> Task: OEM SC7 context save (0x500146bc) I> oem sc7 context saved I> Task: Disable MSS perf stats (0x50020d18) I> Task: Program display sticky bits (0x50020c94) I> Task: Storage device deinit (0x50001ed8) I> Task: SMMU external bypass disable (0x50011eb4) I> Task: SMMU init (0x50011dd0) I> Task: Program CBB PCIE AMAP regions (0x50014b08) I> Task: Program GICv3 registers (0x50020db8) I> Task: Audit firewall settings (0x5001e1c0) I> Task: Bootchain failure check (0x500026a4) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ▒▒NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 03:23:19 UTC 2022 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! E/TC:00 0 jetson_user_key_pta_init:700 jetson_user_key_pta_init: Failed (f0100006). E/TC:00 0 call_initcalls:43 Initcall __text_start + 0x000dab50 failed I/TC: Primary CPU switching to normal world boot ▒▒ Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ▒▒I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot ▒▒[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (nvidia@host) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue May 16 20:12:56 KST 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Jetson AGX Orin [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x805401c18 SMBIOS=0xffff0000 SMBIOS 3.0=0x8039a0000 MEMATTR=0x80476e018 ESRT=0x8039b1f98 RNG=0x827905998 MEMRESERVE=0x804770f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000008039b1f98 to 0x00000008039b1fd0. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000817800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000835ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000007ffffffff] [ 0.000000] node 0: [mem 0x0000000800000000-0x00000008021bffff] [ 0.000000] node 0: [mem 0x00000008021c0000-0x0000000803562fff] [ 0.000000] node 0: [mem 0x0000000803563000-0x00000008036fdfff] [ 0.000000] node 0: [mem 0x00000008036fe000-0x000000080398ffff] [ 0.000000] node 0: [mem 0x0000000803990000-0x00000008039affff] [ 0.000000] node 0: [mem 0x00000008039b0000-0x000000080453ffff] [ 0.000000] node 0: [mem 0x0000000804540000-0x00000008046cffff] [ 0.000000] node 0: [mem 0x00000008046d0000-0x000000080473ffff] [ 0.000000] node 0: [mem 0x0000000804740000-0x000000080475ffff] [ 0.000000] node 0: [mem 0x0000000804760000-0x000000080477ffff] [ 0.000000] node 0: [mem 0x0000000804780000-0x00000008049effff] [ 0.000000] node 0: [mem 0x00000008049f0000-0x0000000804a3ffff] [ 0.000000] node 0: [mem 0x0000000804a40000-0x0000000804a4ffff] [ 0.000000] node 0: [mem 0x0000000804a50000-0x0000000804a9ffff] [ 0.000000] node 0: [mem 0x0000000804aa0000-0x0000000804e4ffff] [ 0.000000] node 0: [mem 0x0000000804e50000-0x0000000804e5ffff] [ 0.000000] node 0: [mem 0x0000000804e60000-0x0000000804ebffff] [ 0.000000] node 0: [mem 0x0000000804ec0000-0x000000080534ffff] [ 0.000000] node 0: [mem 0x0000000805350000-0x000000080539ffff] [ 0.000000] node 0: [mem 0x00000008053a0000-0x000000080553ffff] [ 0.000000] node 0: [mem 0x0000000805540000-0x00000008055dffff] [ 0.000000] node 0: [mem 0x00000008055e0000-0x000000080568ffff] [ 0.000000] node 0: [mem 0x0000000805690000-0x000000080572ffff] [ 0.000000] node 0: [mem 0x0000000805730000-0x00000008057bffff] [ 0.000000] node 0: [mem 0x00000008057c0000-0x000000080585ffff] [ 0.000000] node 0: [mem 0x0000000805860000-0x000000080612ffff] [ 0.000000] node 0: [mem 0x0000000806130000-0x000000080630ffff] [ 0.000000] node 0: [mem 0x0000000806310000-0x00000008278bffff] [ 0.000000] node 0: [mem 0x00000008278c0000-0x000000082790ffff] [ 0.000000] node 0: [mem 0x0000000827910000-0x000000082b6affff] [ 0.000000] node 0: [mem 0x000000082c400000-0x000000082c7fffff] [ 0.000000] node 0: [mem 0x0000000834000000-0x0000000835ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000835ffffff] [ 0.000000] On node 0, zone Normal: 336 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7925040 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 30995400K/32205504K available (18112K kernel code, 3170K rwdata, 7128K rodata, 3968K init, 1093K bss, 947960K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000763] Console: colour dummy device 80x25 [ 0.000948] printk: console [tty0] enabled [ 0.000984] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000992] pid_max: default: 32768 minimum: 301 [ 0.001055] LSM: Security Framework initializing [ 0.001075] Yama: becoming mindful. [ 0.001091] SELinux: Initializing. [ 0.001172] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001220] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.002742] rcu: Hierarchical SRCU implementation. [ 0.002829] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.003364] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0004-p3737-0000.dts [ 0.003371] DTB Build time: May 16 2023 22:16:31 [ 0.004828] Tegra Revision: A01 SKU: 0xd2 CPU Process: 0 SoC Process: 0 [ 0.004955] Remapping and enabling EFI services. [ 0.006128] smp: Bringing up secondary CPUs ... [ 0.034796] Detected PIPT I-cache on CPU1 [ 0.034827] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.034858] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.063480] Detected PIPT I-cache on CPU2 [ 0.063489] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.063504] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.092079] Detected PIPT I-cache on CPU3 [ 0.092088] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.092101] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.122715] Detected PIPT I-cache on CPU4 [ 0.122737] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.122763] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.151394] Detected PIPT I-cache on CPU5 [ 0.151404] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.151418] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.180013] Detected PIPT I-cache on CPU6 [ 0.180023] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.180037] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.208634] Detected PIPT I-cache on CPU7 [ 0.208644] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.208657] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.208712] smp: Brought up 1 node, 8 CPUs [ 0.208755] SMP: Total of 8 processors activated. [ 0.208759] CPU features: detected: Privileged Access Never [ 0.208761] CPU features: detected: LSE atomic instructions [ 0.208764] CPU features: detected: User Access Override [ 0.208767] CPU features: detected: 32-bit EL0 Support [ 0.208769] CPU features: detected: Common not Private translations [ 0.208772] CPU features: detected: RAS Extension Support [ 0.208774] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.208778] CPU features: detected: CRC32 instructions [ 0.208780] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.242047] CPU: All CPU(s) started at EL2 [ 0.244167] devtmpfs: initialized [ 0.259672] Registered cp15_barrier emulation handler [ 0.259685] Registered setend emulation handler [ 0.259691] KASLR enabled [ 0.259804] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.259817] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.261360] pinctrl core: initialized pinctrl subsystem [ 0.261824] SMBIOS 3.0.0 present. [ 0.261831] DMI: /, BIOS 1.0-d7fb19b 08/10/2022 [ 0.262070] NET: Registered protocol family 16 [ 0.262683] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.262883] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.263079] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.263104] audit: initializing netlink subsys (disabled) [ 0.263179] audit: type=2000 audit(0.260:1): state=initialized audit_enabled=0 res=1 [ 0.263332] thermal_sys: Registered thermal governor 'step_wise' [ 0.263333] thermal_sys: Registered thermal governor 'power_allocator' [ 0.263339] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.265327] cpuidle: using governor menu [ 0.265447] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.265525] ASID allocator initialised with 32768 entries [ 0.265612] Serial: AMBA PL011 UART driver [ 0.267212] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.267238] Tegra reboot handler registered. [ 0.285175] mc: mapped MMIO address: 0xffff800011110000 -> 0x2c10000 [ 0.285188] mc: mapped MMIO address: 0xffff800011130000 -> 0x2c20000 [ 0.285195] mc: mapped MMIO address: 0xffff800011150000 -> 0x2c30000 [ 0.285202] mc: mapped MMIO address: 0xffff800011170000 -> 0x2c40000 [ 0.285209] mc: mapped MMIO address: 0xffff800011190000 -> 0x2c50000 [ 0.285217] mc: mapped MMIO address: 0xffff8000111b0000 -> 0x2b80000 [ 0.285223] mc: mapped MMIO address: 0xffff8000111d0000 -> 0x2b90000 [ 0.285229] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2ba0000 [ 0.285237] mc: mapped MMIO address: 0xffff800011210000 -> 0x2bb0000 [ 0.285244] mc: mapped MMIO address: 0xffff800011230000 -> 0x1700000 [ 0.285250] mc: mapped MMIO address: 0xffff800011250000 -> 0x1710000 [ 0.285257] mc: mapped MMIO address: 0xffff800011270000 -> 0x1720000 [ 0.285264] mc: mapped MMIO address: 0xffff800011290000 -> 0x1730000 [ 0.285272] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x1740000 [ 0.285280] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x1750000 [ 0.285286] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x1760000 [ 0.285292] mc: mapped MMIO address: 0xffff800011310000 -> 0x1770000 [ 0.285303] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.285327] mc-err: mcerr ops are set to t23x [ 0.285594] tegra234-cbb 13a00000.cbb-fabric: secure_irq = 21 [ 0.285646] tegra234-cbb c600000.aon-fabric: secure_irq = 22 [ 0.285686] tegra234-cbb d600000.bpmp-fabric: secure_irq = 23 [ 0.285721] tegra234-cbb de00000.dce-fabric: secure_irq = 24 [ 0.285759] tegra234-cbb be00000.rce-fabric: secure_irq = 25 [ 0.285798] tegra234-cbb b600000.sce-fabric: secure_irq = 26 [ 0.286021] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 73, base_baud = 0) is a SBSA [ 1.483233] printk: console [ttyAMA0] enabled [ 1.491431] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.498144] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.504845] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.511544] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.519970] ACPI: Interpreter disabled. [ 1.524943] vdd-av1v1-hub: supplied by vdd-5v-sys [ 1.529821] vbusA-cvb: supplied by vdd-5v-sys [ 1.534294] vbusB-cvb: supplied by vdd-5v-sys [ 1.538776] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 1.543677] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 1.548752] iommu: Default domain type: Translated [ 1.553660] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.559896] SCSI subsystem initialized [ 1.563707] usbcore: registered new interface driver usbfs [ 1.569205] usbcore: registered new interface driver hub [ 1.574526] usbcore: registered new device driver usb [ 1.579755] mc: Linux media interface: v0.10 [ 1.584030] videodev: Linux video capture interface: v2.00 [ 1.589660] pps_core: LinuxPPS API ver. 1 registered [ 1.594624] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.603761] PTP clock support registered [ 1.607873] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.615038] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.622695] Registered efivars operations [ 1.627182] FPGA manager framework [ 1.630602] Advanced Linux Sound Architecture Driver Initialized. [ 1.636932] Bluetooth: Core ver 2.22 [ 1.640512] NET: Registered protocol family 31 [ 1.644956] Bluetooth: HCI device and connection manager initialized [ 1.651318] Bluetooth: HCI socket layer initialized [ 1.656196] Bluetooth: L2CAP socket layer initialized [ 1.661252] Bluetooth: SCO socket layer initialized [ 1.666605] camchar: rtcpu character device driver loaded [ 1.672212] clocksource: Switched to clocksource arch_sys_counter [ 1.827556] VFS: Disk quotas dquot_6.6.0 [ 1.831520] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.838530] pnp: PnP ACPI: disabled [ 1.843824] la/ptsa driver initialized. [ 1.847711] NET: Registered protocol family 2 [ 1.852262] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.861940] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 1.870702] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.878991] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.886819] TCP: Hash tables configured (established 262144 bind 65536) [ 1.893520] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.900454] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 1.907888] NET: Registered protocol family 1 [ 1.912471] RPC: Registered named UNIX socket transport module. [ 1.918398] RPC: Registered udp transport module. [ 1.923098] RPC: Registered tcp transport module. [ 1.927800] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.934245] PCI: CLS 0 bytes, default 64 [ 1.938285] Trying to unpack rootfs image as initramfs... [ 2.053175] Freeing initrd memory: 8196K [ 2.059231] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.067229] kvm [1]: IPA Size Limit: 48 bits [ 2.071617] kvm [1]: VHE mode initialized successfully [ 2.077403] Initialise system trusted keyrings [ 2.081923] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 2.090259] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.096332] NFS: Registering the id_resolver key type [ 2.101396] Key type id_resolver registered [ 2.105578] Key type id_legacy registered [ 2.109614] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.116321] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.123726] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.139855] NET: Registered protocol family 38 [ 2.144306] Key type asymmetric registered [ 2.148401] Asymmetric key parser 'x509' registered [ 2.153296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.160742] io scheduler mq-deadline registered [ 2.165274] io scheduler kyber registered [ 2.173066] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.178664] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.184250] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.189835] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 2.197865] tegra_dc_assign_hw_data: no matching compatible node [ 2.203882] tegradccommon module_init failed [ 2.208153] tegradc module_init failed [ 2.212138] EINJ: ACPI disabled. [ 2.216883] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.223763] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 2.229074] tegra-pmc: ### PMC reset level: L0 [ 2.233512] tegra-pmc: ### PMC reset status reg: 0x0 [ 2.239625] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.252590] random: fast init done [ 2.253000] printk: console [ttyTCU0] enabled [ 3.836363] arm-smmu 12000000.iommu: probing hardware configuration... [ 3.844353] arm-smmu 12000000.iommu: SMMUv2 with: [ 3.849188] arm-smmu 12000000.iommu: stage 1 translation [ 3.854734] arm-smmu 12000000.iommu: stage 2 translation [ 3.860274] arm-smmu 12000000.iommu: nested translation [ 3.865732] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 3.873146] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 3.881848] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 3.888545] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 3.895255] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 3.902733] arm-smmu 10000000.iommu: probing hardware configuration... [ 3.909422] arm-smmu 10000000.iommu: SMMUv2 with: [ 3.914251] arm-smmu 10000000.iommu: stage 1 translation [ 3.919797] arm-smmu 10000000.iommu: stage 2 translation [ 3.925338] arm-smmu 10000000.iommu: nested translation [ 3.930802] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 3.938221] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 3.946880] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 3.953589] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 3.960297] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 3.967418] arm-smmu 8000000.iommu: probing hardware configuration... [ 3.974032] arm-smmu 8000000.iommu: SMMUv2 with: [ 3.978779] arm-smmu 8000000.iommu: stage 1 translation [ 3.984220] arm-smmu 8000000.iommu: stage 2 translation [ 3.989664] arm-smmu 8000000.iommu: nested translation [ 3.995030] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.002364] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.010919] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.017535] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.024148] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.031449] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.041116] tegra_profiler: version: 1.147, samples/io: 49/28 [ 4.047114] tegra_profiler: auth: init [ 4.051220] nvsciipc: loaded module [ 4.055735] tegra23x-qspi 3270000.spi: Adding to iommu group 0 [ 4.061880] tegra23x-qspi 3270000.spi: Node prod has invalid entries [ 4.068409] tegra23x-qspi 3270000.spi: Node prod: Child has not proper setting [ 4.075820] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 4.083413] tegra23x-qspi 3270000.spi: Prod settings list not found [ 4.089934] tegra23x-qspi 3270000.spi: Failed to get reset control: -517 [ 4.097399] tun: Universal TUN/TAP device driver, 1.6 [ 4.103064] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.110480] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.115947] e1000e: Intel(R) PRO/1000 Network Driver [ 4.121052] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.127132] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.132674] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.138535] PPP generic driver version 2.4.2 [ 4.142966] PPP BSD Compression module registered [ 4.147801] PPP Deflate Compression module registered [ 4.153016] PPP MPPE Compression module registered [ 4.157954] usbcore: registered new interface driver r8152 [ 4.163610] usbcore: registered new interface driver asix [ 4.169165] usbcore: registered new interface driver ax88179_178a [ 4.175436] usbcore: registered new interface driver cdc_ether [ 4.181437] usbcore: registered new interface driver net1080 [ 4.187243] usbcore: registered new interface driver cdc_subset [ 4.193319] usbcore: registered new interface driver zaurus [ 4.199044] usbcore: registered new interface driver cdc_ncm [ 4.204856] usbcore: registered new interface driver aqc111 [ 4.210696] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.217052] ohci-pci: OHCI PCI platform driver [ 4.221622] ohci-platform: OHCI generic platform driver [ 4.227285] tegra-xusb 3610000.xhci: Adding to iommu group 1 [ 4.233529] usbcore: registered new interface driver uas [ 4.239010] usbcore: registered new interface driver usb-storage [ 4.245332] tegra-xudc 3550000.xudc: Adding to iommu group 2 [ 4.251379] mousedev: PS/2 mouse device common for all mice [ 4.257123] usbcore: registered new interface driver xpad [ 4.264511] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.269974] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 4.278197] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.284602] i2c /dev entries driver [ 4.288300] tegra-i2c 3160000.i2c: Adding to iommu group 3 [ 4.294119] tegra-i2c c240000.i2c: Adding to iommu group 3 [ 4.299799] tegra-i2c 3180000.i2c: Adding to iommu group 3 [ 4.305494] tegra-i2c 3190000.i2c: Adding to iommu group 3 [ 4.311160] tegra-i2c 31b0000.i2c: Adding to iommu group 3 [ 4.316840] tegra-i2c 31c0000.i2c: Adding to iommu group 3 [ 4.322518] tegra-i2c c250000.i2c: Adding to iommu group 3 [ 4.328188] tegra-i2c 31e0000.i2c: Adding to iommu group 3 [ 4.335732] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.344331] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.353634] device-mapper: uevent: version 1.0.3 [ 4.358449] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.368117] sdhci: Secure Digital Host Controller Interface driver [ 4.374469] sdhci: Copyright(c) Pierre Ossman [ 4.378942] Synopsys Designware Multimedia Card Interface Driver [ 4.385181] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.391155] sdhci-tegra 3460000.sdhci: Adding to iommu group 4 [ 4.391471] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.391501] sdhci-tegra 3400000.sdhci: Adding to iommu group 5 [ 4.411200] tegra-bpmp bpmp: firmware: 888a114dda6bea50b6c6-eac380526d6 [ 4.419082] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.424925] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 4.432494] nvvrs_pseq 4-003c: CAUTION: interrupt status reg:0x10 set to 0x1 [ 4.439745] nvvrs_pseq 4-003c: Clearing interrupts [ 4.448152] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.454099] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ▒▒debugfs initialized ▒▒[ 5.680556] hid: raw HID events driver (C) Jiri Kosina [ 5.686318] usbcore: registered new interface driver usbhid [ 5.692066] usbhid: USB HID core driver [ 5.696777] tegra-dce d800000.dce: Adding to iommu group 6 [ 5.703657] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 5.712681] tegra234-aon c000000.aon: Adding to iommu group 7 [ 5.718881] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.721443] c000000.aon:hsp: probed [ 5.727866] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [0]. Ignored... [ 5.740365] tegra234-aon c000000.aon: init done [ 5.740730] tegra23x-psc e860000.psc: Adding to iommu group 8 [ 5.745056] dce: dce_admin_send_cmd_ver:413 version : [0x2] err : [0x0] [ 5.751482] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.758326] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x1] [ 5.764322] tegra23x-psc e860000.psc: init done [ 5.764499] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 9 [ 5.773292] dce: dce_admin_setup_clients_ipc:542 Channel Reset Complete for Type [1] ... [ 5.773294] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [1]. Ignored... [ 5.773311] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [1]. Ignored... [ 5.778477] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.784599] dce: dce_admin_setup_clients_ipc:518 Get queue info failed for [2] [ 5.784983] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 5.799800] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 5.801840] dce: dce_admin_setup_clients_ipc:542 Channel Reset Complete for Type [3] ... [ 5.801842] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [3]. Ignored... [ 5.801852] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [3]. Ignored... [ 5.810672] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 5.819144] dce: dce_start_boot_flow:100 DCE_BOOT_DONE [ 5.826808] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 5.898875] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 5.910569] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 5.923178] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 5.936055] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 5.948290] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (124) [ 5.955137] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 5.966349] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=7a10e4613e151d2bf1df37dd80d456800f5b94d0 [ 5.979814] t19x_cache tegra-cache: probed [ 5.984240] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 5.994446] optee: probing for conduit method. [ 5.999044] optee: revision 3.16 (65cc2218) [ 5.999734] optee: dynamic shared memory is enabled [ 6.009179] optee: initialized driver [ 6.024784] nvpmodel: initialized successfully [ 6.029484] tegra_hv: get_hvd: not initialized yet [ 6.034438] user_ivc_mempool: hypervisor not present [ 6.040191] usbcore: registered new interface driver snd-usb-audio [ 6.047186] u32 classifier [ 6.049993] input device check on [ 6.053764] Actions configured [ 6.057404] Initializing XFRM netlink socket [ 6.062208] NET: Registered protocol family 10 [ 6.068009] Segment Routing with IPv6 [ 6.071837] NET: Registered protocol family 17 [ 6.076431] NET: Registered protocol family 15 [ 6.081050] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.095153] Bluetooth: RFCOMM socket layer initialized [ 6.100481] Bluetooth: RFCOMM ver 1.11 [ 6.104359] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.110465] Bluetooth: HIDP socket layer initialized [ 6.116375] 9pnet: Installing 9P2000 support [ 6.120844] Key type dns_resolver registered [ 6.126142] registered taskstats version 1 [ 6.130383] Loading compiled-in X.509 certificates [ 6.139322] Loaded X.509 cert 'Build time autogenerated kernel key: 135092eef75b7d0acfbd652eff28d3234a796b11' [ 6.149898] tegra194-pcie 14100000.pcie: Adding to iommu group 10 [ 6.161787] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.168855] tegra194-pcie 14160000.pcie: Adding to iommu group 11 [ 6.180192] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.186974] tegra194-pcie 141a0000.pcie: Adding to iommu group 12 [ 6.197999] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 6.225252] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 13 [ 6.235188] host1x 13e40000.host1x: Adding to iommu group 14 [ 7.251079] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 7.271799] host1x 13e40000.host1x: initialized [ 7.276899] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 15 [ 7.284931] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 7.296897] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 16 [ 7.304891] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 7.316838] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 17 [ 7.324813] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 7.336752] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 18 [ 7.344747] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 7.356688] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 19 [ 7.364686] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 7.376625] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 20 [ 7.384632] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 7.396592] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 21 [ 7.404567] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 7.416513] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 22 [ 7.424499] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 7.436439] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 23 [ 7.444452] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 7.456392] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 24 [ 7.464391] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 7.476326] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 25 [ 7.484336] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 7.496276] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 26 [ 7.504282] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 7.516200] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 27 [ 7.524216] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 7.536160] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 28 [ 7.544128] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 7.556060] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 29 [ 7.564042] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 7.575969] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 30 [ 7.583945] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 7.595901] falcon 15340000.vic: Adding to iommu group 31 [ 7.609817] falcon 15340000.vic: initialized [ 7.614503] falcon 15380000.nvjpg: Adding to iommu group 32 [ 7.625613] falcon 15380000.nvjpg: initialized [ 7.630302] falcon 15540000.nvjpg1: Adding to iommu group 33 [ 7.640896] falcon 15540000.nvjpg1: initialized [ 7.645683] falcon 154c0000.nvenc: Adding to iommu group 34 [ 7.659045] falcon 154c0000.nvenc: initialized [ 7.663736] falcon 15a50000.ofa: Adding to iommu group 35 [ 7.674724] falcon 15a50000.ofa: initialized [ 7.679253] nvdec 15480000.nvdec: Adding to iommu group 36 [ 7.694865] nvdec 15480000.nvdec: initialized [ 7.699465] tsec 15500000.tsec: Adding to iommu group 37 [ 7.713707] tsec 15500000.tsec: initialized [ 7.720035] gic 2a41000.agic-controller: GIC IRQ controller registered [ 7.735917] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 7.750445] gpio-394 (camera-control-output-low): hogged as output/low [ 7.757210] gpio-397 (camera-control-output-low): hogged as output/low [ 7.763977] gpio-487 (camera-control-output-low): hogged as output/low [ 7.770738] gpio-486 (camera-control-output-low): hogged as output/low [ 7.778478] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 7.785664] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 7.792638] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 7.799041] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 7.805426] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 7.811729] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 7.819747] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 7.828292] tegra194-isp5 14800000.isp: Adding to iommu group 38 [ 7.837565] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 7.847186] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 7.853735] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 39 [ 7.861930] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 40 [ 7.869846] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 7.879777] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 7.886587] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 7.896492] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 7.903286] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 7.913212] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 7.920022] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 41 [ 7.920295] random: crng init done [ 7.928680] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 7.943322] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 42 [ 7.951970] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 7.963342] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 43 [ 7.971982] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 7.983348] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 44 [ 7.991962] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 8.003335] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 45 [ 8.011965] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 8.023332] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 46 [ 8.031946] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 8.043315] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 47 [ 8.051953] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 8.063329] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 48 [ 8.071949] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 8.083320] pva 16000000.pva0: Adding to iommu group 49 [ 8.107402] pva 16000000.pva0: initialized [ 8.117626] nvdla 15880000.nvdla0: Adding to iommu group 50 [ 8.132318] nvdla 15880000.nvdla0: initialized [ 8.138500] nvdla 158c0000.nvdla1: Adding to iommu group 51 [ 8.152456] nvdla 158c0000.nvdla1: initialized [ 8.158580] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 3 [ 8.165626] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 8.173119] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 8.179772] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 8.186511] serial-tegra 3100000.serial: Adding to iommu group 3 [ 8.193195] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 8.202907] serial-tegra 3130000.serial: Adding to iommu group 3 [ 8.209509] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 72, base_baud = 0) is a TEGRA_UART [ 8.219118] tegra23x-qspi 3270000.spi: Node prod has invalid entries [ 8.225672] tegra23x-qspi 3270000.spi: Node prod: Child has not proper setting [ 8.233130] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 8.240757] tegra23x-qspi 3270000.spi: Prod settings list not found [ 8.269079] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 8.278869] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.284452] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 8.293090] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 8.302708] tegra-xusb 3610000.xhci: irq 241, io mem 0x03610000 [ 8.309132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.317648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.325091] usb usb1: Product: xHCI Host Controller [ 8.330110] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.336386] usb usb1: SerialNumber: 3610000.xhci [ 8.341778] hub 1-0:1.0: USB hub found [ 8.345673] hub 1-0:1.0: 4 ports detected [ 8.350017] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.355587] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 8.363396] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 8.370903] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 8.379428] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.386873] usb usb2: Product: xHCI Host Controller [ 8.391895] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.398180] usb usb2: SerialNumber: 3610000.xhci [ 8.403428] hub 2-0:1.0: USB hub found [ 8.407306] hub 2-0:1.0: 4 ports detected [ 8.441902] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2007000 KHz, changing to: 2035200 KHz [ 8.455561] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2009000 KHz, changing to: 2035200 KHz [ 8.467973] tegra194-cpufreq e000000.ccplex: probed with ICC [ 8.474729] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 8.476807] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.482174] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 8.484408] mmc0: CQHCI version 5.10 [ 8.494934] irq: IRQ308: trimming hierarchy from :interrupt-controller@f400000-1 [ 8.496975] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 8.504626] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 308 [ 8.511859] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 8.513289] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 8.536386] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 8.600870] mmc0: Command Queue Engine enabled [ 8.605445] mmc0: periodic cache flush enabled [ 8.610018] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 8.616889] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 8.621751] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0) [ 8.638258] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 9.653787] tegra194-pcie 14100000.pcie: Phy link never came up [ 9.659950] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 9.666770] pci_bus 0001:00: root bus resource [bus 00-ff] [ 9.672411] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 9.682261] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 9.693107] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 9.701050] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 9.707393] pci 0001:00:00.0: PME# supported from D0 D3hot [ 9.720707] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 9.726106] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.735046] pcieport 0001:00:00.0: Adding to iommu group 10 [ 9.741015] pcieport 0001:00:00.0: PME: Signaling with IRQ 51 [ 9.747175] pcieport 0001:00:00.0: AER: enabled with IRQ 51 [ 9.753133] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 9.759224] pci 0001:00:00.0: Removing from iommu group 10 [ 9.764872] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 9.772636] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 9.779911] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 9.787094] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 9.795796] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 9.804486] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 10.452182] tegra-xusb 3610000.xhci: entering ELPG done [ 10.921768] tegra194-pcie 14160000.pcie: Phy link never came up [ 10.927919] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 10.934729] pci_bus 0004:00: root bus resource [bus 00-ff] [ 10.940372] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 10.950491] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.961334] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 10.969273] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 10.975616] pci 0004:00:00.0: PME# supported from D0 D3hot [ 10.988711] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 10.994107] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 11.003034] pcieport 0004:00:00.0: Adding to iommu group 11 [ 11.008996] pcieport 0004:00:00.0: PME: Signaling with IRQ 53 [ 11.015151] pcieport 0004:00:00.0: AER: enabled with IRQ 53 [ 11.021108] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 11.027185] pci 0004:00:00.0: Removing from iommu group 11 [ 11.032832] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 11.040427] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 11.046974] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 11.051993] avdd-cam-2v8: supplied by vdd-3v3-sys [ 11.056924] vdd-dp: supplied by vdd-3v3-sys [ 11.061372] vdd-3v3-sd: supplied by vdd-3v3-sys [ 11.066424] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 11.073492] tegra194-isp5 14800000.isp: initialized [ 11.084091] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 11.090532] (NULL device *): fops function table already registered [ 11.098756] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 11.105756] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 11.105915] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 11.119989] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 308 [ 11.225995] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 11.233174] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 11.241868] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 11.250558] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 12.175196] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 12.365765] tegra194-pcie 141a0000.pcie: Phy link never came up [ 12.371920] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 12.378729] pci_bus 0005:00: root bus resource [bus 00-ff] [ 12.384369] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 12.394490] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 12.405332] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 12.413266] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 12.419599] pci 0005:00:00.0: PME# supported from D0 D3hot [ 12.432827] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 12.438224] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 12.447160] pcieport 0005:00:00.0: Adding to iommu group 12 [ 12.453131] pcieport 0005:00:00.0: PME: Signaling with IRQ 55 [ 12.459296] pcieport 0005:00:00.0: AER: enabled with IRQ 55 [ 12.465246] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 12.471327] pci 0005:00:00.0: Removing from iommu group 12 [ 12.476978] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 12.484600] nvethernet 2310000.ethernet: Adding to iommu group 52 [ 12.490996] nvethernet 2310000.ethernet: failed to read skip mac reset flag, default 0 [ 12.499163] nvethernet 2310000.ethernet: failed to read MDIO address [ 12.505728] nvethernet 2310000.ethernet: setting to default DMA bit mask [ 12.759550] nvethernet 2310000.ethernet: Ethernet MAC address: 48:b0:2d:95:8d:14 [ 12.768069] nvethernet 2310000.ethernet: Macsec not enabled [ 12.773805] nvethernet 2310000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 12.783083] nvethernet 2310000.ethernet: eth0 (HW ver: 53) created with 8 DMA channels [ 12.791402] nvethernet 6810000.ethernet: Adding to iommu group 53 [ 12.798054] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 12.806215] nvethernet 6810000.ethernet: failed to read MDIO address [ 12.812754] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 12.819652] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G [ 13.219916] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:95:8d:13 [ 13.228213] nvethernet 6810000.ethernet: Macsec not enabled [ 13.233946] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 13.245162] nvethernet 6810000.ethernet: eth1 (HW ver: 31) created with 10 DMA channels [ 13.253846] irq: IRQ310: trimming hierarchy from :pmc@c360000 [ 13.259816] irq: IRQ311: trimming hierarchy from :interrupt-controller@f400000-1 [ 13.267488] irq: IRQ312: trimming hierarchy from :pmc@c360000 [ 13.273452] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 13.280998] tegra-se-nvhost 15810000.se: Adding to iommu group 54 [ 13.287693] tegra-se-nvhost 15810000.se: initialized [ 13.303648] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 13.310026] tegra-se-nvhost 15820000.se: Adding to iommu group 55 [ 13.316681] tegra-se-nvhost 15820000.se: initialized [ 13.322626] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 13.328997] tegra-se-nvhost 15840000.se: Adding to iommu group 56 [ 13.335613] tegra-se-nvhost 15840000.se: initialized [ 13.343209] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 13.350050] tegra_actmon d230000.actmon: in actmon_register()... [ 13.356480] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 13.362709] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 13.371096] hvc_sysfs: hypervisor is not present ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk ▒▒[ 13.508581] ALSA device list: [ 13.511646] No soundcards found. [ 13.515710] Freeing unused kernel memory: 3968K [ 13.520418] Run /init as init process [ 13.535811] Root device found: mmcblk0p1 [ 13.540345] Found dev node: /dev/mmcblk0p1 [ 14.389183] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 14.394662] EXT4-fs (mmcblk0p1): recovery complete [ 14.504268] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 14.513565] Rootfs mounted over mmcblk0p1 [ 14.533487] Switching from initrd to actual rootfs [ 14.634224] systemd[1]: System time before build time, advancing clock. [ 14.697047] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 14.720727] systemd[1]: Detected architecture arm64. [ 14.755980] systemd[1]: Set hostname to . [ 14.939075] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 14.952090] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 14.961618] systemd[1]: Created slice system-modprobe.slice. [ 14.967793] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 14.974510] systemd[1]: Created slice User and Session Slice. [ 14.980550] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 14.988668] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 14.998460] systemd[1]: Reached target User and Group Name Lookups. [ 15.004986] systemd[1]: Reached target Slices. [ 15.009623] systemd[1]: Reached target Swap. [ 15.014287] systemd[1]: Listening on RPCbind Server Activation Socket. [ 15.021164] systemd[1]: Listening on Syslog Socket. [ 15.026325] systemd[1]: Listening on fsck to fsckd communication Socket. [ 15.033339] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 15.040316] systemd[1]: Listening on Journal Audit Socket. [ 15.046092] systemd[1]: Listening on Journal Socket (/dev/log). [ 15.052369] systemd[1]: Listening on Journal Socket. [ 15.057636] systemd[1]: Listening on udev Control Socket. [ 15.063321] systemd[1]: Listening on udev Kernel Socket. [ 15.069800] systemd[1]: Mounting Huge Pages File System... [ 15.076454] systemd[1]: Mounting POSIX Message Queue File System... [ 15.083774] systemd[1]: Mounting RPC Pipe File System... [ 15.090196] systemd[1]: Mounting Kernel Debug File System... [ 15.096925] systemd[1]: Mounting Kernel Trace File System... [ 15.103899] systemd[1]: Starting Journal Service... [ 15.110038] systemd[1]: Starting Set the console keyboard layout... [ 15.117478] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 15.126362] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 15.135770] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 15.143939] systemd[1]: Started Nameserver information manager. [ 15.150487] systemd[1]: Reached target Network (Pre). [ 15.156589] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 15.165988] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 15.178121] systemd[1]: Starting Load Kernel Modules... [ 15.184460] systemd[1]: Starting Remount Root and Kernel File Systems... [ 15.191233] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 15.197876] systemd[1]: Starting udev Coldplug all Devices... [ 15.205178] systemd[1]: Started Journal Service. [ 15.232424] systemd-journald[276]: Received client request to flush runtime journal. [ 15.256948] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 15.263768] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x000000082f000000,16777216 [ 15.273397] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 15.281659] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272 [ 15.291568] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 15.299834] nvmap_page_pool_init: Total RAM pages: 7817427 [ 15.305495] nvmap_page_pool_init: nvmap page pool size: 977178 pages (3817 MB) [ 15.313141] nvmap_background_zero_thread: PP zeroing thread starting. [ 15.313223] misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB) [ 15.330454] misc nvmap: created heap fsi base 0x000000082f000000 size (16384KiB) [ 17.134820] nvidia: loading out-of-tree module taints kernel. [ 17.151485] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 17.167967] nv_platform 13800000.display: Adding to iommu group 57 [ 17.178019] platform 13800000.display:nvdisplay-niso: Adding to iommu group 58 [ 17.186094] spi-tegra114 3210000.spi: Adding to iommu group 3 [ 17.192508] NVRM: loading NVIDIA UNIX Open Kernel Module for aarch64 35.1.0 Release Build (buildbrain@mobile-u64-5273-d7000) Wed Aug 10 20:32:39 PDT 2022 [ 17.197811] spi-tegra114 3230000.spi: Adding to iommu group 3 [ 17.226535] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels [ 17.247103] cpu-throttle-alert cooling device registered. [ 17.252924] gpu-throttle-alert cooling device registered. [ 17.258809] irq: IRQ313: trimming hierarchy from :pmc@c360000 [ 17.258888] cv0-throttle-alert cooling device registered. [ 17.265118] nct1008_nct72 4-004c: starting parse dt [ 17.270396] cv1-throttle-alert cooling device registered. [ 17.270442] cv2-throttle-alert cooling device registered. [ 17.270484] soc0-throttle-alert cooling device registered. [ 17.275550] nct1008_nct72 4-004c: !!!Found deprecated property!!! [ 17.281390] soc1-throttle-alert cooling device registered. [ 17.286714] nct1008_nct72 4-004c: success parsing dt [ 17.292751] soc2-throttle-alert cooling device registered. [ 17.298758] nct1008_nct72 4-004c: success in enabling tmp451 VDD rail [ 17.306168] hot-surface-alert cooling device registered. [ 17.346699] nct1008_nct72 4-004c: LOC shutdown limit 107 [ 17.352843] nct1008_nct72 4-004c: EXT shutdown limit 107 [ 17.392103] qspi_mtd spi6.0: MX25U51279G (65536 Kbytes) [ 17.397716] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x4000000 (64MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 17.409552] nct1008_nct72 4-004c: initial LOC temp: 40000 [ 17.415608] nct1008_nct72 4-004c: initial EXT temp: 45750 [ 17.422693] nct1008_nct72 4-004c: hi_b:-4, lo_b:0 [ 17.422839] nvadsp 2993000.adsp: Adding to iommu group 59 [ 17.428467] nct1008_nct72 4-004c: nct1008_probe: initialized [ 17.433258] nvadsp 2993000.adsp: in probe()... [ 17.444251] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 17.510846] 1 fixed-partitions partitions found on MTD device spi6.0 [ 17.517511] Creating 1 MTD partitions on "spi6.0": [ 17.524968] 0x000000000000-0x000004000000 : "Whole_flash0" [ 17.525524] tegra-asoc: sound: Adding to iommu group 59 [ 17.531061] irq: IRQ315: trimming hierarchy from :interrupt-controller@f400000-1 [ 17.544489] tegra-hda 3510000.hda: Adding to iommu group 60 [ 17.545713] ucsi_ccg 1-0008: i2c_transfer failed -121 [ 17.555842] ucsi_ccg 1-0008: ucsi_ccg_init failed - -121 [ 17.564263] ucsi_ccg: probe of 1-0008 failed with error -121 [ 17.564603] tegra210-adsp aconnect@2a41000:adsp_audio: Adding to iommu group 59 [ 17.578797] tegra210_adsp_audio_probe: platform probe started [ 17.586106] tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1 [ 17.597237] tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot [ 17.605362] tegra210-adsp tegra210-adsp: Default param-type to BYTE for src [ 17.612983] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1 [ 17.621127] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aec [ 17.628769] tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire [ 17.636074] tegra210-adsp tegra210-adsp: adma channel page address dt entry not found [ 17.636075] tegra210-adsp tegra210-adsp: using adma channel page 0 [ 17.636159] nvadsp 2993000.adsp: ADSP OS firmware already loaded [ 17.674390] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input1 [ 17.691855] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input2 [ 17.694783] cryptd: max_cpu_qlen set to 1000 [ 17.703035] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input3 [ 17.717521] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input4 [ 18.000368] tegra210-adsp tegra210-adsp: Loaded app wire [ 18.005860] tegra210-adsp tegra210-adsp: Loaded app apm [ 18.011238] tegra210-adsp tegra210-adsp: Loaded app adma [ 18.016706] tegra210-adsp tegra210-adsp: Loaded app adma_tx [ 18.022440] nvadsp_set_adma_dump_reg: callback for adma reg dump is sent to 0000000041d94d12 [ 18.056459] tegra210-adsp tegra210-adsp: Tegra210 ADSP driver successfully registered [ 18.678263] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 18.678263] [ 18.932225] using random self ethernet address [ 18.936887] using random host ethernet address [ 19.614029] using random self ethernet address [ 19.618642] using random host ethernet address Ubuntu 20.04.4 LTS agx-orin ttyTCU0 agx-orin login: nvidia (automatic login) Welcome to Ubuntu 20.04.4 LTS (GNU/Linux 5.10.104-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 11 updates can be applied immediately. 8 of these updates are standard security updates. To see these additional updates run: apt list --upgradable Last login: Thu Apr 21 12:55:12 UTC 2022 on ttyTCU0 To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. nvidia@agx-orin:~$ [ 31.884256] [eqos_poll_for_swr][598][type:0x4][loga-0x0] poll_for_swr: timeout [ 31.891760] net eth0: failed to poll MAC Software reset [ 34.330663] Aquantia AQR113C 6810000.ethernet:00: aqr107_wait_reset_complete failed: -110