[0000.131] C> I2C command failed
[0000.134] C> block index = (4) and rail_id = (1)
[0000.138] C> Addr: Reg = [0xe8:0x07]: 336166925
[0000.256] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.264] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.269] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.273] I> bit @ 0xd480000
[0000.276] I> BR-BCT relocated to 0xd7020000
[0000.280] I> Boot-device: eMMC
[0000.284] I> sdmmc bdev is already initialized
[0000.289] I> pmic: reset reason (nverc)\t: 0x0
[0000.293] I> Reading GPT from 512 for device 00000003
[0000.299] I> Reading GPT from 8388096 for device 00000003
[0000.305] W> Cannot find any partition table for 00000003
[0000.310] E> tegrabl_partition_publish: exit error = 6834001
[0000.316] I> Reading GPT from 512 for device 00010003
[0000.323] I> Found 33 partitions in 00010003 device
[0000.328] I> A/B: bin_type (16) slot 1
[0000.332] I> Loading partition bpmp-fw_b at 0xd7800000
[0000.337] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.342] I> Addr: 0xd7800000, start-block: 58795193, num_blocks: 1
[0000.357] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.363] I> A/B: bin_type (17) slot 1
[0000.367] I> Loading partition bpmp-fw-dtb_b at 0xd79f0000
[0000.372] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.377] I> Addr: 0xd79f0000, start-block: 58797401, num_blocks: 1
[0000.391] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.567] I> BPMP-FW load address = 0xd7800000
[0000.571] I> BPMP-FW DTB load address = 0x5018e200
[0000.576] I> Loading SCE-FW ...
[0000.579] I> A/B: bin_type (12) slot 1
[0000.582] I> Loading partition sce-fw_b at 0xd7300000
[0000.587] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.593] I> Addr: 0xd7300000, start-block: 58802497, num_blocks: 1
[0000.602] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.608] I> Init SCE
[0000.610] I> Copy BTCM section
[0000.613] I> A/B: bin_type (13) slot 1
[0000.617] I> Loading partition cpu-bootloader_b at 0x96000000
[0000.622] I> Reading two headers - addr:0x96000000 blocks:1
[0000.628] I> Addr: 0x96000000, start-block: 58774529, num_blocks: 1
[0000.639] I> Binary(13) of size 283648 is loaded @ 0x96000000
[0000.645] I> A/B: bin_type (20) slot 1
[0000.648] I> Loading partition bootloader-dtb_b at 0x8520f400
[0000.654] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.660] I> Addr: 0x8520f400, start-block: 58776577, num_blocks: 1
[0000.671] I> Binary(20) of size 258944 is loaded @ 0x8520f400
[0000.676] I> MB2-params(VA) @ 0xd7000000
[0000.680] I> CPUBL-params(VA) @ 0xd7000000
[0000.684] I> CPUBL-params(PA) @ 0x277000000
[0000.688] I> CPU-BL loaded @ PA 0x96000000
[0000.692] I> Loading TOS ...
[0000.695] I> A/B: bin_type (14) slot 1
[0000.699] I> Loading partition secure-os_b at 0x8530f600
[0000.704] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.709] I> Addr: 0x8530f600, start-block: 58783745, num_blocks: 1
[0000.718] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.723] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.731] I> Erasing Monitor @ 0x8530f800
[0000.735] I> Unhalting SCE
[0000.738] I> Primary Memory Start:80000000 Size:70000000
[0000.743] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.749] I> Waypoint2-ACK: 0x52012714
[0000.753] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.112] I> Welcome to Cboot
[0001.115] I> Cboot Version: t186-40e13a32
[0001.119] I> CPU-BL Params @ 0x277000000
[0001.122] I>  0) Base:0x00000000 Size:0x00000000
[0001.127] I>  1) Base:0x277f00000 Size:0x00100000
[0001.131] I>  2) Base:0x277e00000 Size:0x00100000
[0001.136] I>  3) Base:0x277d00000 Size:0x00100000
[0001.140] I>  4) Base:0x277c00000 Size:0x00100000
[0001.145] I>  5) Base:0x277b00000 Size:0x00100000
[0001.149] I>  6) Base:0x277800000 Size:0x00200000
[0001.154] I>  7) Base:0x277400000 Size:0x00400000
[0001.158] I>  8) Base:0x277a00000 Size:0x00100000
[0001.163] I>  9) Base:0x277300000 Size:0x00100000
[0001.168] I> 10) Base:0x276800000 Size:0x00800000
[0001.172] I> 11) Base:0x30000000 Size:0x00040000
[0001.176] I> 12) Base:0xf0000000 Size:0x00100000
[0001.181] I> 13) Base:0x30040000 Size:0x00001000
[0001.185] I> 14) Base:0x30048000 Size:0x00001000
[0001.190] I> 15) Base:0x30049000 Size:0x00001000
[0001.194] I> 16) Base:0x3004a000 Size:0x00001000
[0001.199] I> 17) Base:0x3004b000 Size:0x00001000
[0001.203] I> 18) Base:0x3004c000 Size:0x00001000
[0001.207] I> 19) Base:0x3004d000 Size:0x00001000
[0001.212] I> 20) Base:0x3004e000 Size:0x00001000
[0001.216] I> 21) Base:0x3004f000 Size:0x00001000
[0001.221] I> 22) Base:0x00000000 Size:0x00000000
[0001.225] I> 23) Base:0xf0100000 Size:0x00010000
[0001.230] I> 24) Base:0x00000000 Size:0x00000000
[0001.234] I> 25) Base:0x00000000 Size:0x00000000
[0001.238] I> 26) Base:0x00000000 Size:0x00000000
[0001.243] I> 27) Base:0x00000000 Size:0x00000000
[0001.247] I> 28) Base:0x84400000 Size:0x00400000
[0001.252] I> 29) Base:0x30000000 Size:0x00010000
[0001.256] I> 30) Base:0x278000000 Size:0x08000000
[0001.261] I> 31) Base:0x00000000 Size:0x00000000
[0001.265] I> 32) Base:0x276000000 Size:0x00600000
[0001.270] I> 33) Base:0x80000000 Size:0x70000000
[0001.274] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.279] I> 35) Base:0x00000000 Size:0x00000000
[0001.283] I> 36) Base:0x00000000 Size:0x00000000
[0001.287] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.292] I> 38) Base:0x84000000 Size:0x00400000
[0001.296] I> 39) Base:0x96000000 Size:0x02400000
[0001.301] I> 40) Base:0x85000000 Size:0x01200000
[0001.305] I> 41) Base:0x277000000 Size:0x00280000
[0001.310] I> 42) Base:0x00000000 Size:0x00000000
[0001.314] I> 43) Base:0x00000000 Size:0x00000000
[0001.319] GIC-SPI Target CPU: 4\r
[0001.322] Interrupts Init done\r
[0001.325] calling constructors\r
[0001.328] initializing heap
[0001.331] initializing threads\r
[0001.334] initializing timers\r
[0001.337] creating bootstrap completion thread\r
[0001.342] top of bootstrap2()\r
[0001.345] CPU: ARM Cortex A57\r
[0001.348] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100\r
[0001.353] initializing platform\r
[0001.357] I> Bl_dtb @0x8520f400
[0001.360] I> gpio framework initialized
[0001.365] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.374] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.382] I> GPIO framework and drivers are initialized.
[0001.387] I> Boot-device: eMMC
[0001.394] I> sdmmc bdev is already initialized
[0001.414] W> Cannot find any partition table for 00000003
[0001.432] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.437] W> opt-in fuse is not set, skip fuse_burning
[0001.442] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.448] E> Cannot find partition SMD
[0001.451] E> Cannot find partition SMD_b
[0001.455] I> A/B: bin_type (21) slot 1
[0001.459] E> A/B select failed
[0001.462] E> Kernel-dtb loading failed
[0001.465] initializing target\r
[0001.468] calling apps_init()\r
[0001.471] starting app kernel_boot_app\r
[0001.604] I> decompressor handler not found
[0001.608] I> Kernel type = Normal
[0001.611] I> Loading kernel-bootctrl from partition
[0001.616] E> Cannot find partition kernel-bootctrl
[0001.621] E> Cannot open partition kernel-bootctrl
[0001.625] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data
[0001.632] I> Loading kernel-bootctrl_b from partition
[0001.637] E> Cannot find partition kernel-bootctrl_b
[0001.642] E> Cannot open partition kernel-bootctrl_b
[0001.647] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data
[0001.654] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0001.661] I> ########## Fixed storage boot ##########
[0001.666] E> Cannot find partition SMD
[0001.669] E> Cannot find partition SMD_b
[0001.673] I> A/B: bin_type (24) slot 1
[0001.677] E> A/B select failed
[0001.680] E> Storage boot failed, err: 487391245
[0001.684] E> A/B loader failure
[0001.687] E> tegrabl_display_shutdown: display is not initialized
[0000.123] C> I2C command failed
[0000.126] C> block index = (4) and rail_id = (1)
[0000.130] C> Addr: Reg = [0xe8:0x07]: 336166925
[0000.247] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.256] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.260] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.265] I> bit @ 0xd480000
[0000.268] I> BR-BCT relocated to 0xd7020000
[0000.272] I> Boot-device: eMMC
[0000.276] I> sdmmc bdev is already initialized
[0000.280] I> pmic: reset reason (nverc)\t: 0x0
[0000.285] I> Reading GPT from 512 for device 00000003
[0000.291] I> Reading GPT from 8388096 for device 00000003
[0000.297] W> Cannot find any partition table for 00000003
[0000.302] E> tegrabl_partition_publish: exit error = 6834001
[0000.308] I> Reading GPT from 512 for device 00010003
[0000.315] I> Found 33 partitions in 00010003 device
[0000.320] I> A/B: bin_type (16) slot 1
[0000.323] I> Loading partition bpmp-fw_b at 0xd7800000
[0000.329] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.334] I> Addr: 0xd7800000, start-block: 58795193, num_blocks: 1
[0000.349] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.355] I> A/B: bin_type (17) slot 1
[0000.358] I> Loading partition bpmp-fw-dtb_b at 0xd79f0000
[0000.364] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.369] I> Addr: 0xd79f0000, start-block: 58797401, num_blocks: 1
[0000.383] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.558] I> BPMP-FW load address = 0xd7800000
[0000.563] I> BPMP-FW DTB load address = 0x5018e200
[0000.567] I> Loading SCE-FW ...
[0000.570] I> A/B: bin_type (12) slot 1
[0000.574] I> Loading partition sce-fw_b at 0xd7300000
[0000.579] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.584] I> Addr: 0xd7300000, start-block: 58802497, num_blocks: 1
[0000.594] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.599] I> Init SCE
[0000.602] I> Copy BTCM section
[0000.605] I> A/B: bin_type (13) slot 1
[0000.608] I> Loading partition cpu-bootloader_b at 0x96000000
[0000.614] I> Reading two headers - addr:0x96000000 blocks:1
[0000.619] I> Addr: 0x96000000, start-block: 58774529, num_blocks: 1
[0000.631] I> Binary(13) of size 283648 is loaded @ 0x96000000
[0000.637] I> A/B: bin_type (20) slot 1
[0000.640] I> Loading partition bootloader-dtb_b at 0x8520f400
[0000.646] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.651] I> Addr: 0x8520f400, start-block: 58776577, num_blocks: 1
[0000.662] I> Binary(20) of size 258944 is loaded @ 0x8520f400
[0000.668] I> MB2-params(VA) @ 0xd7000000
[0000.672] I> CPUBL-params(VA) @ 0xd7000000
[0000.676] I> CPUBL-params(PA) @ 0x277000000
[0000.680] I> CPU-BL loaded @ PA 0x96000000
[0000.684] I> Loading TOS ...
[0000.687] I> A/B: bin_type (14) slot 1
[0000.690] I> Loading partition secure-os_b at 0x8530f600
[0000.696] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.701] I> Addr: 0x8530f600, start-block: 58783745, num_blocks: 1
[0000.709] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.715] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.722] I> Erasing Monitor @ 0x8530f800
[0000.727] I> Unhalting SCE
[0000.729] I> Primary Memory Start:80000000 Size:70000000
[0000.734] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.741] I> Waypoint2-ACK: 0x52012714
[0000.745] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.104] I> Welcome to Cboot
[0001.107] I> Cboot Version: t186-40e13a32
[0001.111] I> CPU-BL Params @ 0x277000000
[0001.114] I>  0) Base:0x00000000 Size:0x00000000
[0001.119] I>  1) Base:0x277f00000 Size:0x00100000
[0001.123] I>  2) Base:0x277e00000 Size:0x00100000
[0001.128] I>  3) Base:0x277d00000 Size:0x00100000
[0001.132] I>  4) Base:0x277c00000 Size:0x00100000
[0001.137] I>  5) Base:0x277b00000 Size:0x00100000
[0001.141] I>  6) Base:0x277800000 Size:0x00200000
[0001.146] I>  7) Base:0x277400000 Size:0x00400000
[0001.150] I>  8) Base:0x277a00000 Size:0x00100000
[0001.155] I>  9) Base:0x277300000 Size:0x00100000
[0001.159] I> 10) Base:0x276800000 Size:0x00800000
[0001.164] I> 11) Base:0x30000000 Size:0x00040000
[0001.168] I> 12) Base:0xf0000000 Size:0x00100000
[0001.173] I> 13) Base:0x30040000 Size:0x00001000
[0001.177] I> 14) Base:0x30048000 Size:0x00001000
[0001.182] I> 15) Base:0x30049000 Size:0x00001000
[0001.186] I> 16) Base:0x3004a000 Size:0x00001000
[0001.191] I> 17) Base:0x3004b000 Size:0x00001000
[0001.195] I> 18) Base:0x3004c000 Size:0x00001000
[0001.199] I> 19) Base:0x3004d000 Size:0x00001000
[0001.204] I> 20) Base:0x3004e000 Size:0x00001000
[0001.208] I> 21) Base:0x3004f000 Size:0x00001000
[0001.213] I> 22) Base:0x00000000 Size:0x00000000
[0001.217] I> 23) Base:0xf0100000 Size:0x00010000
[0001.222] I> 24) Base:0x00000000 Size:0x00000000
[0001.226] I> 25) Base:0x00000000 Size:0x00000000
[0001.230] I> 26) Base:0x00000000 Size:0x00000000
[0001.235] I> 27) Base:0x00000000 Size:0x00000000
[0001.239] I> 28) Base:0x84400000 Size:0x00400000
[0001.244] I> 29) Base:0x30000000 Size:0x00010000
[0001.248] I> 30) Base:0x278000000 Size:0x08000000
[0001.253] I> 31) Base:0x00000000 Size:0x00000000
[0001.257] I> 32) Base:0x276000000 Size:0x00600000
[0001.262] I> 33) Base:0x80000000 Size:0x70000000
[0001.266] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.271] I> 35) Base:0x00000000 Size:0x00000000
[0001.275] I> 36) Base:0x00000000 Size:0x00000000
[0001.279] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.284] I> 38) Base:0x84000000 Size:0x00400000
[0001.288] I> 39) Base:0x96000000 Size:0x02400000
[0001.293] I> 40) Base:0x85000000 Size:0x01200000
[0001.297] I> 41) Base:0x277000000 Size:0x00280000
[0001.302] I> 42) Base:0x00000000 Size:0x00000000
[0001.306] I> 43) Base:0x00000000 Size:0x00000000
[0001.311] GIC-SPI Target CPU: 4\r
[0001.314] Interrupts Init done\r
[0001.317] calling constructors\r
[0001.320] initializing heap
[0001.323] initializing threads\r
[0001.326] initializing timers\r
[0001.329] creating bootstrap completion thread\r
[0001.334] top of bootstrap2()\r
[0001.337] CPU: ARM Cortex A57\r
[0001.340] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100\r
[0001.345] initializing platform\r
[0001.349] I> Bl_dtb @0x8520f400
[0001.352] I> gpio framework initialized
[0001.357] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.366] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.374] I> GPIO framework and drivers are initialized.
[0001.379] I> Boot-device: eMMC
[0001.386] I> sdmmc bdev is already initialized
[0001.406] W> Cannot find any partition table for 00000003
[0001.424] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.429] W> opt-in fuse is not set, skip fuse_burning
[0001.434] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.440] E> Cannot find partition SMD
[0001.443] E> Cannot find partition SMD_b
[0001.447] I> A/B: bin_type (21) slot 1
[0001.451] E> A/B select failed
[0001.454] E> Kernel-dtb loading failed
[0001.457] initializing target\r
[0001.460] calling apps_init()\r
[0001.463] starting app kernel_boot_app\r
[0001.596] I> decompressor handler not found
[0001.600] I> Kernel type = Normal
[0001.604] I> Loading kernel-bootctrl from partition
[0001.608] E> Cannot find partition kernel-bootctrl
[0001.613] E> Cannot open partition kernel-bootctrl
[0001.617] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data
[0001.624] I> Loading kernel-bootctrl_b from partition
[0001.629] E> Cannot find partition kernel-bootctrl_b
[0001.634] E> Cannot open partition kernel-bootctrl_b
[0001.639] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data
[0001.646] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0001.653] I> ########## Fixed storage boot ##########
[0001.658] E> Cannot find partition SMD
[0001.661] E> Cannot find partition SMD_b
[0001.665] I> A/B: bin_type (24) slot 1
[0001.669] E> A/B select failed
[0001.672] E> Storage boot failed, err: 487391245
[0001.676] E> A/B loader failure
[0001.679] E> tegrabl_display_shutdown: display is not initialized
[0000.116] C> I2C command failed
[0000.119] C> block index = (4) and rail_id = (1)
[0000.123] C> Addr: Reg = [0xe8:0x07]: 336166925
[0000.240] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.249] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.253] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.258] I> bit @ 0xd480000
[0000.261] I> BR-BCT relocated to 0xd7020000
[0000.265] I> Boot-device: eMMC
[0000.269] I> sdmmc bdev is already initialized
[0000.273] I> pmic: reset reason (nverc)\t: 0x0
[0000.278] I> Reading GPT from 512 for device 00000003
[0000.284] I> Reading GPT from 8388096 for device 00000003
[0000.290] W> Cannot find any partition table for 00000003
[0000.295] E> tegrabl_partition_publish: exit error = 6834001
[0000.301] I> Reading GPT from 512 for device 00010003
[0000.308] I> Found 33 partitions in 00010003 device
[0000.313] I> A/B: bin_type (16) slot 1
[0000.316] I> Loading partition bpmp-fw_b at 0xd7800000
[0000.321] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.327] I> Addr: 0xd7800000, start-block: 58795193, num_blocks: 1
[0000.342] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.348] I> A/B: bin_type (17) slot 1
[0000.351] I> Loading partition bpmp-fw-dtb_b at 0xd79f0000
[0000.357] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.362] I> Addr: 0xd79f0000, start-block: 58797401, num_blocks: 1
[0000.376] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.551] I> BPMP-FW load address = 0xd7800000
[0000.556] I> BPMP-FW DTB load address = 0x5018e200
[0000.561] I> Loading SCE-FW ...
[0000.564] I> A/B: bin_type (12) slot 1
[0000.567] I> Loading partition sce-fw_b at 0xd7300000
[0000.572] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.578] I> Addr: 0xd7300000, start-block: 58802497, num_blocks: 1
[0000.587] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.593] I> Init SCE
[0000.595] I> Copy BTCM section
[0000.598] I> A/B: bin_type (13) slot 1
[0000.601] I> Loading partition cpu-bootloader_b at 0x96000000
[0000.607] I> Reading two headers - addr:0x96000000 blocks:1
[0000.613] I> Addr: 0x96000000, start-block: 58774529, num_blocks: 1
[0000.624] I> Binary(13) of size 283648 is loaded @ 0x96000000
[0000.630] I> A/B: bin_type (20) slot 1
[0000.633] I> Loading partition bootloader-dtb_b at 0x8520f400
[0000.639] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.644] I> Addr: 0x8520f400, start-block: 58776577, num_blocks: 1
[0000.655] I> Binary(20) of size 258944 is loaded @ 0x8520f400
[0000.661] I> MB2-params(VA) @ 0xd7000000
[0000.665] I> CPUBL-params(VA) @ 0xd7000000
[0000.669] I> CPUBL-params(PA) @ 0x277000000
[0000.673] I> CPU-BL loaded @ PA 0x96000000
[0000.677] I> Loading TOS ...
[0000.680] I> A/B: bin_type (14) slot 1
[0000.683] I> Loading partition secure-os_b at 0x8530f600
[0000.689] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.694] I> Addr: 0x8530f600, start-block: 58783745, num_blocks: 1
[0000.703] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.708] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.715] I> Erasing Monitor @ 0x8530f800
[0000.720] I> Unhalting SCE
[0000.722] I> Primary Memory Start:80000000 Size:70000000
[0000.728] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.734] I> Waypoint2-ACK: 0x52012714
[0000.738] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.097] I> Welcome to Cboot
[0001.100] I> Cboot Version: t186-40e13a32
[0001.104] I> CPU-BL Params @ 0x277000000
[0001.107] I>  0) Base:0x00000000 Size:0x00000000
[0001.112] I>  1) Base:0x277f00000 Size:0x00100000
[0001.116] I>  2) Base:0x277e00000 Size:0x00100000
[0001.121] I>  3) Base:0x277d00000 Size:0x00100000
[0001.125] I>  4) Base:0x277c00000 Size:0x00100000
[0001.130] I>  5) Base:0x277b00000 Size:0x00100000
[0001.134] I>  6) Base:0x277800000 Size:0x00200000
[0001.139] I>  7) Base:0x277400000 Size:0x00400000
[0001.143] I>  8) Base:0x277a00000 Size:0x00100000
[0001.148] I>  9) Base:0x277300000 Size:0x00100000
[0001.152] I> 10) Base:0x276800000 Size:0x00800000
[0001.157] I> 11) Base:0x30000000 Size:0x00040000
[0001.161] I> 12) Base:0xf0000000 Size:0x00100000
[0001.166] I> 13) Base:0x30040000 Size:0x00001000
[0001.170] I> 14) Base:0x30048000 Size:0x00001000
[0001.175] I> 15) Base:0x30049000 Size:0x00001000
[0001.179] I> 16) Base:0x3004a000 Size:0x00001000
[0001.184] I> 17) Base:0x3004b000 Size:0x00001000
[0001.188] I> 18) Base:0x3004c000 Size:0x00001000
[0001.192] I> 19) Base:0x3004d000 Size:0x00001000
[0001.197] I> 20) Base:0x3004e000 Size:0x00001000
[0001.201] I> 21) Base:0x3004f000 Size:0x00001000
[0001.206] I> 22) Base:0x00000000 Size:0x00000000
[0001.210] I> 23) Base:0xf0100000 Size:0x00010000
[0001.215] I> 24) Base:0x00000000 Size:0x00000000
[0001.219] I> 25) Base:0x00000000 Size:0x00000000
[0001.223] I> 26) Base:0x00000000 Size:0x00000000
[0001.228] I> 27) Base:0x00000000 Size:0x00000000
[0001.232] I> 28) Base:0x84400000 Size:0x00400000
[0001.237] I> 29) Base:0x30000000 Size:0x00010000
[0001.241] I> 30) Base:0x278000000 Size:0x08000000
[0001.246] I> 31) Base:0x00000000 Size:0x00000000
[0001.250] I> 32) Base:0x276000000 Size:0x00600000
[0001.255] I> 33) Base:0x80000000 Size:0x70000000
[0001.259] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.264] I> 35) Base:0x00000000 Size:0x00000000
[0001.268] I> 36) Base:0x00000000 Size:0x00000000
[0001.272] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.277] I> 38) Base:0x84000000 Size:0x00400000
[0001.281] I> 39) Base:0x96000000 Size:0x02400000
[0001.286] I> 40) Base:0x85000000 Size:0x01200000
[0001.290] I> 41) Base:0x277000000 Size:0x00280000
[0001.295] I> 42) Base:0x00000000 Size:0x00000000
[0001.299] I> 43) Base:0x00000000 Size:0x00000000
[0001.304] GIC-SPI Target CPU: 4\r
[0001.307] Interrupts Init done\r
[0001.310] calling constructors\r
[0001.313] initializing heap
[0001.316] initializing threads\r
[0001.319] initializing timers\r
[0001.322] creating bootstrap completion thread\r
[0001.327] top of bootstrap2()\r
[0001.330] CPU: ARM Cortex A57\r
[0001.333] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100\r
[0001.338] initializing platform\r
[0001.342] I> Bl_dtb @0x8520f400
[0001.345] I> gpio framework initialized
[0001.350] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.359] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.367] I> GPIO framework and drivers are initialized.
[0001.372] I> Boot-device: eMMC
[0001.379] I> sdmmc bdev is already initialized
[0001.399] W> Cannot find any partition table for 00000003
[0001.417] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.422] W> opt-in fuse is not set, skip fuse_burning
[0001.427] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.433] E> Cannot find partition SMD
[0001.436] E> Cannot find partition SMD_b
[0001.440] I> A/B: bin_type (21) slot 1
[0001.444] E> A/B select failed
[0001.446] E> Kernel-dtb loading failed
[0001.450] initializing target\r
[0001.453] calling apps_init()\r
[0001.456] starting app kernel_boot_app\r
[0001.589] I> decompressor handler not found
[0001.593] I> Kernel type = Normal
[0001.596] I> Loading kernel-bootctrl from partition
[0001.601] E> Cannot find partition kernel-bootctrl
[0001.606] E> Cannot open partition kernel-bootctrl
[0001.610] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data
[0001.617] I> Loading kernel-bootctrl_b from partition
[0001.622] E> Cannot find partition kernel-bootctrl_b
[0001.627] E> Cannot open partition kernel-bootctrl_b
[0001.632] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data
[0001.639] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0001.646] I> ########## Fixed storage boot ##########
[0001.651] E> Cannot find partition SMD
[0001.654] E> Cannot find partition SMD_b
[0001.658] I> A/B: bin_type (24) slot 1
[0001.662] E> A/B select failed
[0001.664] E> Storage boot failed, err: 487391245
[0001.669] E> A/B loader failure
[0001.672] E> tegrabl_display_shutdown: display is not initialized
[0000.111] C> I2C command failed
[0000.114] C> block index = (4) and rail_id = (1)
[0000.119] C> Addr: Reg = [0xe8:0x07]: 336166925
[0000.236] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.244] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.249] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.254] I> bit @ 0xd480000
[0000.257] I> BR-BCT relocated to 0xd7020000
[0000.261] I> Boot-device: eMMC
[0000.265] I> sdmmc bdev is already initialized
[0000.269] I> pmic: reset reason (nverc)\t: 0x0
[0000.273] I> Reading GPT from 512 for device 00000003
[0000.279] I> Reading GPT from 8388096 for device 00000003
[0000.286] W> Cannot find any partition table for 00000003
[0000.291] E> tegrabl_partition_publish: exit error = 6834001
[0000.297] I> Reading GPT from 512 for device 00010003
[0000.303] I> Found 33 partitions in 00010003 device
[0000.309] I> A/B: bin_type (16) slot 1
[0000.312] I> Loading partition bpmp-fw_b at 0xd7800000
[0000.317] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.323] I> Addr: 0xd7800000, start-block: 58795193, num_blocks: 1
[0000.338] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.344] I> A/B: bin_type (17) slot 1
[0000.347] I> Loading partition bpmp-fw-dtb_b at 0xd79f0000
[0000.353] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.358] I> Addr: 0xd79f0000, start-block: 58797401, num_blocks: 1
[0000.372] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.547] I> BPMP-FW load address = 0xd7800000
[0000.552] I> BPMP-FW DTB load address = 0x5018e200
[0000.556] I> Loading SCE-FW ...
[0000.559] I> A/B: bin_type (12) slot 1
[0000.563] I> Loading partition sce-fw_b at 0xd7300000
[0000.568] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.573] I> Addr: 0xd7300000, start-block: 58802497, num_blocks: 1
[0000.583] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.588] I> Init SCE
[0000.591] I> Copy BTCM section
[0000.594] I> A/B: bin_type (13) slot 1
[0000.597] I> Loading partition cpu-bootloader_b at 0x96000000
[0000.603] I> Reading two headers - addr:0x96000000 blocks:1
[0000.608] I> Addr: 0x96000000, start-block: 58774529, num_blocks: 1
[0000.620] I> Binary(13) of size 283648 is loaded @ 0x96000000
[0000.625] I> A/B: bin_type (20) slot 1
[0000.629] I> Loading partition bootloader-dtb_b at 0x8520f400
[0000.635] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.640] I> Addr: 0x8520f400, start-block: 58776577, num_blocks: 1
[0000.651] I> Binary(20) of size 258944 is loaded @ 0x8520f400
[0000.657] I> MB2-params(VA) @ 0xd7000000
[0000.661] I> CPUBL-params(VA) @ 0xd7000000
[0000.665] I> CPUBL-params(PA) @ 0x277000000
[0000.669] I> CPU-BL loaded @ PA 0x96000000
[0000.673] I> Loading TOS ...
[0000.676] I> A/B: bin_type (14) slot 1
[0000.679] I> Loading partition secure-os_b at 0x8530f600
[0000.684] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.690] I> Addr: 0x8530f600, start-block: 58783745, num_blocks: 1
[0000.698] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.704] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.711] I> Erasing Monitor @ 0x8530f800
[0000.716] I> Unhalting SCE
[0000.718] I> Primary Memory Start:80000000 Size:70000000
[0000.723] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.730] I> Waypoint2-ACK: 0x52012714
[0000.734] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.093] I> Welcome to Cboot
[0001.096] I> Cboot Version: t186-40e13a32
[0001.099] I> CPU-BL Params @ 0x277000000
[0001.103] I>  0) Base:0x00000000 Size:0x00000000
[0001.108] I>  1) Base:0x277f00000 Size:0x00100000
[0001.112] I>  2) Base:0x277e00000 Size:0x00100000
[0001.117] I>  3) Base:0x277d00000 Size:0x00100000
[0001.121] I>  4) Base:0x277c00000 Size:0x00100000
[0001.126] I>  5) Base:0x277b00000 Size:0x00100000
[0001.130] I>  6) Base:0x277800000 Size:0x00200000
[0001.135] I>  7) Base:0x277400000 Size:0x00400000
[0001.139] I>  8) Base:0x277a00000 Size:0x00100000
[0001.144] I>  9) Base:0x277300000 Size:0x00100000
[0001.148] I> 10) Base:0x276800000 Size:0x00800000
[0001.153] I> 11) Base:0x30000000 Size:0x00040000
[0001.157] I> 12) Base:0xf0000000 Size:0x00100000
[0001.162] I> 13) Base:0x30040000 Size:0x00001000
[0001.166] I> 14) Base:0x30048000 Size:0x00001000
[0001.170] I> 15) Base:0x30049000 Size:0x00001000
[0001.175] I> 16) Base:0x3004a000 Size:0x00001000
[0001.179] I> 17) Base:0x3004b000 Size:0x00001000
[0001.184] I> 18) Base:0x3004c000 Size:0x00001000
[0001.188] I> 19) Base:0x3004d000 Size:0x00001000
[0001.193] I> 20) Base:0x3004e000 Size:0x00001000
[0001.197] I> 21) Base:0x3004f000 Size:0x00001000
[0001.201] I> 22) Base:0x00000000 Size:0x00000000
[0001.206] I> 23) Base:0xf0100000 Size:0x00010000
[0001.210] I> 24) Base:0x00000000 Size:0x00000000
[0001.215] I> 25) Base:0x00000000 Size:0x00000000
[0001.219] I> 26) Base:0x00000000 Size:0x00000000
[0001.224] I> 27) Base:0x00000000 Size:0x00000000
[0001.228] I> 28) Base:0x84400000 Size:0x00400000
[0001.232] I> 29) Base:0x30000000 Size:0x00010000
[0001.237] I> 30) Base:0x278000000 Size:0x08000000
[0001.241] I> 31) Base:0x00000000 Size:0x00000000
[0001.246] I> 32) Base:0x276000000 Size:0x00600000
[0001.250] I> 33) Base:0x80000000 Size:0x70000000
[0001.255] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.259] I> 35) Base:0x00000000 Size:0x00000000
[0001.264] I> 36) Base:0x00000000 Size:0x00000000
[0001.268] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.273] I> 38) Base:0x84000000 Size:0x00400000
[0001.277] I> 39) Base:0x96000000 Size:0x02400000
[0001.282] I> 40) Base:0x85000000 Size:0x01200000
[0001.286] I> 41) Base:0x277000000 Size:0x00280000
[0001.291] I> 42) Base:0x00000000 Size:0x00000000
[0001.295] I> 43) Base:0x00000000 Size:0x00000000
[0001.299] GIC-SPI Target CPU: 4\r
[0001.303] Interrupts Init done\r
[0001.306] calling constructors\r
[0001.309] initializing heap
[0001.312] initializing threads\r
[0001.315] initializing timers\r
[0001.318] creating bootstrap completion thread\r
[0001.323] top of bootstrap2()\r
[0001.326] CPU: ARM Cortex A57\r
[0001.329] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100\r
[0001.334] initializing platform\r
[0001.337] I> Bl_dtb @0x8520f400
[0001.340] I> gpio framework initialized
[0001.346] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver\r
[0001.355] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver\r
[0001.362] I> GPIO framework and drivers are initialized.
[0001.367] I> Boot-device: eMMC
[0001.375] I> sdmmc bdev is already initialized
[0001.395] W> Cannot find any partition table for 00000003
[0001.412] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.418] W> opt-in fuse is not set, skip fuse_burning
[0001.423] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.429] E> Cannot find partition SMD
[0001.432] E> Cannot find partition SMD_b
[0001.436] I> A/B: bin_type (21) slot 1
[0001.439] E> A/B select failed
[0001.442] E> Kernel-dtb loading failed
[0001.446] initializing target\r
[0001.449] calling apps_init()\r
[0001.452] starting app kernel_boot_app\r
[0001.585] I> decompressor handler not found
[0001.589] I> Kernel type = Normal
[0001.592] I> Loading kernel-bootctrl from partition
[0001.597] E> Cannot find partition kernel-bootctrl
[0001.602] E> Cannot open partition kernel-bootctrl
[0001.606] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data
[0001.613] I> Loading kernel-bootctrl_b from partition
[0001.618] E> Cannot find partition kernel-bootctrl_b
[0001.623] E> Cannot open partition kernel-bootctrl_b
[0001.628] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data
[0001.635] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0001.642] I> ########## Fixed storage boot ##########
[0001.647] E> Cannot find partition SMD
[0001.650] E> Cannot find partition SMD_b
[0001.654] I> A/B: bin_type (24) slot 1
[0001.657] E> A/B select failed
[0001.660] E> Storage boot failed, err: 487391245
[0001.665] E> A/B loader failure
[0001.668] E> tegrabl_display_shutdown: display is not initialized
[0000.112] C> I2C command failed
[0000.115] C> block index = (4) and rail_id = (1)
[0000.119] C> Addr: Reg = [0xe8:0x07]: 336166925
[0000.237] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.245] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.250] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.254] I> bit @ 0xd480000
[0000.257] I> BR-BCT relocated to 0xd7020000
[0000.261] I> Boot-device: eMMC
[0000.265] I> sdmmc bdev is already initialized
[0000.270] I> pmic: reset reason (nverc)\t: 0x0
[0000.274] I> Reading GPT from 512 for device 00000003
[0000.280] I> Reading GPT from 8388096 for device 00000003
[0000.286] W> Cannot find any partition table for 00000003
[0000.292] E> tegrabl_partition_publish: exit error = 6834001
[0000.297] I> Reading GPT from 512 for device 00010003
[0000.304] I> Found 33 partitions in 00010003 device
[0000.309] I> A/B: bin_type (16) slot 1
[0000.313] I> Loading partition bpmp-fw_b at 0xd7800000
[0000.318] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.323] I> Addr: 0xd7800000, start-block: 58795193, num_blocks: 1
[0000.338] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.344] I> A/B: bin_type (17) slot 1
[0000.348] I> Loading partition bpmp-fw-dtb_b at 0xd79f0000
[0000.353] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.359] I> Addr: 0xd79f0000, start-block: 58797401, num_blocks: 1
[0000.372] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.548] I> BPMP-FW load address = 0xd7800000
[0000.552] I> BPMP-FW DTB load address = 0x5018e200
[0000.557] I> Loading SCE-FW ...
[0000.560] I> A/B: bin_type (12) slot 1
[0000.563] I> Loading partition sce-fw_b at 0xd7300000
[0000.568] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.574] I> Addr: 0xd7300000, start-block: 58802497, num_blocks: 1
[0000.583] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.589] I> Init SCE
[0000.591] I> Copy BTCM section
[0000.594] I> A/B: bin_type (13) slot 1
[0000.598] I> Loading partition cpu-bootloader_b at 0x96000000
[0000.603] I> Reading two headers - addr:0x96000000 blocks:1
[0000.609] I> Addr: 0x96000000, start-block: 58774529, num_blocks: 1
[0000.620] I> Binary(13) of size 283648 is loaded @ 0x96000000
[0000.626] I> A/B: bin_type (20) slot 1
[0000.630] I> Loading partition bootloader-dtb_b at 0x8520f400
[0000.635] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.641] I> Addr: 0x8520f400, start-block: 58776577, num_blocks: 1
[0000.652] I> Binary(20) of size 258944 is loaded @ 0x8520f400
[0000.657] I> MB2-params(VA) @ 0xd7000000
[0000.661] I> CPUBL-params(VA) @ 0xd7000000
[0000.665] I> CPUBL-params(PA) @ 0x277000000
[0000.669] I> CPU-BL loaded @ PA 0x96000000
[0000.673] I> Loading TOS ...
[0000.676] I> A/B: bin_type (14) slot 1
[0000.680] I> Loading partition secure-os_b at 0x8530f600
[0000.685] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.690] I> Addr: 0x8530f600, start-block: 58783745, num_blocks: 1
[0000.699] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.705] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.712] I> Erasing Monitor @ 0x8530f800
[0000.716] I> Unhalting SCE
[0000.719] I> Primary Memory Start:80000000 Size:70000000
[0000.724] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.730] I> Waypoint2-ACK: 0x52012714
[0000.734] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.093] I> Welcome to Cboot
[0001.096] I> Cboot Version: t186-40e13a32
[0001.100] I> CPU-BL Params @ 0x277000000
[0001.103] I>  0) Base:0x00000000 Size:0x00000000
[0001.108] I>  1) Base:0x277f00000 Size:0x00100000
[0001.112] I>  2) Base:0x277e00000 Size:0x00100000
[0001.117] I>  3) Base:0x277d00000 Size:0x00100000
[0001.121] I>  4) Base:0x277c00000 Size:0x00100000
[0001.126] I>  5) Base:0x277b00000 Size:0x00100000
[0001.130] I>  6) Base:0x277800000 Size:0x00200000
[0001.135] I>  7) Base:0x277400000 Size:0x00400000
[0001.139] I>  8) Base:0x277a00000 Size:0x00100000
[0001.144] I>  9) Base:0x277300000 Size:0x00100000
[0001.148] I> 10) Base:0x276800000 Size:0x00800000
[0001.153] I> 11) Base:0x30000000 Size:0x00040000
[0001.157] I> 12) Base:0xf0000000 Size:0x00100000
[0001.162] I> 13) Base:0x30040000 Size:0x00001000
[0001.166] I> 14) Base:0x30048000 Size:0x00001000
[0001.171] I> 15) Base:0x30049000 Size:0x00001000
[0001.175] I> 16) Base:0x3004a000 Size:0x00001000
[0001.180] I> 17) Base:0x3004b000 Size:0x00001000
[0001.184] I> 18) Base:0x3004c000 Size:0x00001000
[0001.188] I> 19) Base:0x3004d000 Size:0x00001000
[0001.193] I> 20) Base:0x3004e000 Size:0x00001000
[0001.197] I> 21) Base:0x3004f000 Size:0x00001000
[0001.202] I> 22) Base:0x00000000 Size:0x00000000
[0001.206] I> 23) Base:0xf0100000 Size:0x00010000
[0001.211] I> 24) Base:0x00000000 Size:0x00000000
[0001.215] I> 25) Base:0x00000000 Size:0x00000000
[0001.219] I> 26) Base:0x00000000 Size:0x00000000
[0001.224] I> 27) Base:0x00000000 Size:0x00000000
[0001.228] I> 28) Base:0x84400000 Size:0x00400000
[0001.233] I> 29) Base:0x30000000 Size:0x00010000
[0001.237] I> 30) Base:0x278000000 Size:0x08000000
[0001.242] I> 31) Base:0x00000000 Size:0x00000000
[0001.246] I> 32) Base:0x276000000 Size:0x00600000
[0001.251] I> 33) Base:0x80000000 Size:0x70000000
[0001.255] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.260] I> 35) Base:0x00000000 Size:0x00000000
[0001.264] I> 36) Base:0x00000000 Size:0x00000000
[0001.268] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.273] I> 38) Base:0x84000000 Size:0x00400000
[0001.277] I> 39) Base:0x96000000 Size:0x02400000
[0001.282] I> 40) Base:0x85000000 Size:0x01200000
[0001.286] I> 41) Base:0x277000000 Size:0x00280000
[0001.291] I> 42) Base:0x00000000 Size:0x00000000
[0001.295] I> 43) Base:0x00000000 Size:0x00000000
[0001.300] GIC-SPI Target CPU: 4\r
[0001.303] Interrupts Init done\r
[0001.306] calling constructors\r
[0001.309] initializing heap
[0001.312] initializing threads\r
[0001.315] initializing timers\r
[0001.318] creating bootstrap completion thread\r
[0001.323] top of bootstrap2()\r
[0001.326] CPU: ARM Cortex A57\r
[0001.329] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100\r
[0001.334] initializing platform\r
[0001.338] I> Bl_dtb @0x8520f400
[0001.341] I> gpio framework initialized
[0001.346] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.355] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.363] I> GPIO framework and drivers are initialized.
[0001.368] I> Boot-device: eMMC
[0001.375] I> sdmmc bdev is already initialized
[0001.395] W> Cannot find any partition table for 00000003
[0001.413] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.418] W> opt-in fuse is not set, skip fuse_burning
[0001.423] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.429] E> Cannot find partition SMD
[0001.432] E> Cannot find partition SMD_b
[0001.436] I> A/B: bin_type (21) slot 1
[0001.440] E> A/B select failed
[0001.443] E> Kernel-dtb loading failed
[0001.446] initializing target\r
[0001.449] calling apps_init()\r
[0001.452] starting app kernel_boot_app\r
[0001.585] I> decompressor handler not found
[0001.589] I> Kernel type = Normal
[0001.593] I> Loading kernel-bootctrl from partition
[0001.597] E> Cannot find partition kernel-bootctrl
[0001.602] E> Cannot open partition kernel-bootctrl
[0001.606] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data
[0001.613] I> Loading kernel-bootctrl_b from partition
[0001.618] E> Cannot find partition kernel-bootctrl_b
[0001.623] E> Cannot open partition kernel-bootctrl_b
[0001.628] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data
[0001.635] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0001.642] I> ########## Fixed storage boot ##########
[0001.647] E> Cannot find partition SMD
[0001.650] E> Cannot find partition SMD_b
[0001.654] I> A/B: bin_type (24) slot 1
[0001.658] E> A/B select failed
[0001.661] E> Storage boot failed, err: 487391245
[0001.665] E> A/B loader failure
[0001.668] E> tegrabl_display_shutdown: display is not initialized
[0000.128] C> I2C command failed
[0000.131] C> block index = (4) and rail_id = (1)
[0000.135] C> Addr: Reg = [0xe8:0x07]: 336166925
[0000.252] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.261] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.266] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.270] I> bit @ 0xd480000
[0000.273] I> BR-BCT relocated to 0xd7020000
[0000.277] I> Boot-device: eMMC
[0000.281] I> sdmmc bdev is already initialized
[0000.286] I> pmic: reset reason (nverc)\t: 0x0
[0000.290] I> Reading GPT from 512 for device 00000003
[0000.296] I> Reading GPT from 8388096 for device 00000003
[0000.302] W> Cannot find any partition table for 00000003
[0000.307] E> tegrabl_partition_publish: exit error = 6834001
[0000.313] I> Reading GPT from 512 for device 00010003
[0000.320] I> Found 33 partitions in 00010003 device
[0000.325] I> A/B: bin_type (16) slot 1
[0000.329] I> Loading partition bpmp-fw_b at 0xd7800000
[0000.334] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.339] I> Addr: 0xd7800000, start-block: 58795193, num_blocks: 1
[0000.354] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.360] I> A/B: bin_type (17) slot 1
[0000.363] I> Loading partition bpmp-fw-dtb_b at 0xd79f0000
[0000.369] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.374] I> Addr: 0xd79f0000, start-block: 58797401, num_blocks: 1
[0000.388] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.566] I> BPMP-FW load address = 0xd7800000
[0000.570] I> BPMP-FW DTB load address = 0x5018e200
[0000.575] I> Loading SCE-FW ...
[0000.578] I> A/B: bin_type (12) slot 1
[0000.582] I> Loading partition sce-fw_b at 0xd7300000
[0000.587] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.592] I> Addr: 0xd7300000, start-block: 58802497, num_blocks: 1
[0000.601] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.607] I> Init SCE
[0000.609] I> Copy BTCM section
[0000.612] I> A/B: bin_type (13) slot 1
[0000.616] I> Loading partition cpu-bootloader_b at 0x96000000
[0000.622] I> Reading two headers - addr:0x96000000 blocks:1
[0000.627] I> Addr: 0x96000000, start-block: 58774529, num_blocks: 1
[0000.638] I> Binary(13) of size 283648 is loaded @ 0x96000000
[0000.644] I> A/B: bin_type (20) slot 1
[0000.648] I> Loading partition bootloader-dtb_b at 0x8520f400
[0000.653] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.659] I> Addr: 0x8520f400, start-block: 58776577, num_blocks: 1
[0000.670] I> Binary(20) of size 258944 is loaded @ 0x8520f400
[0000.676] I> MB2-params(VA) @ 0xd7000000
[0000.679] I> CPUBL-params(VA) @ 0xd7000000
[0000.684] I> CPUBL-params(PA) @ 0x277000000
[0000.688] I> CPU-BL loaded @ PA 0x96000000
[0000.692] I> Loading TOS ...
[0000.694] I> A/B: bin_type (14) slot 1
[0000.698] I> Loading partition secure-os_b at 0x8530f600
[0000.703] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.709] I> Addr: 0x8530f600, start-block: 58783745, num_blocks: 1
[0000.717] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.723] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.730] I> Erasing Monitor @ 0x8530f800
[0000.734] I> Unhalting SCE
[0000.737] I> Primary Memory Start:80000000 Size:70000000
[0000.742] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.749] I> Waypoint2-ACK: 0x52012714
[0000.752] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.112] I> Welcome to Cboot
[0001.115] I> Cboot Version: t186-40e13a32
[0001.119] I> CPU-BL Params @ 0x277000000
[0001.122] I>  0) Base:0x00000000 Size:0x00000000
[0001.127] I>  1) Base:0x277f00000 Size:0x00100000
[0001.131] I>  2) Base:0x277e00000 Size:0x00100000
[0001.136] I>  3) Base:0x277d00000 Size:0x00100000
[0001.140] I>  4) Base:0x277c00000 Size:0x00100000
[0001.145] I>  5) Base:0x277b00000 Size:0x00100000
[0001.149] I>  6) Base:0x277800000 Size:0x00200000
[0001.154] I>  7) Base:0x277400000 Size:0x00400000
[0001.158] I>  8) Base:0x277a00000 Size:0x00100000
[0001.163] I>  9) Base:0x277300000 Size:0x00100000
[0001.167] I> 10) Base:0x276800000 Size:0x00800000
[0001.172] I> 11) Base:0x30000000 Size:0x00040000
[0001.176] I> 12) Base:0xf0000000 Size:0x00100000
[0001.181] I> 13) Base:0x30040000 Size:0x00001000
[0001.185] I> 14) Base:0x30048000 Size:0x00001000
[0001.190] I> 15) Base:0x30049000 Size:0x00001000
[0001.194] I> 16) Base:0x3004a000 Size:0x00001000
[0001.198] I> 17) Base:0x3004b000 Size:0x00001000
[0001.203] I> 18) Base:0x3004c000 Size:0x00001000
[0001.207] I> 19) Base:0x3004d000 Size:0x00001000
[0001.212] I> 20) Base:0x3004e000 Size:0x00001000
[0001.216] I> 21) Base:0x3004f000 Size:0x00001000
[0001.221] I> 22) Base:0x00000000 Size:0x00000000
[0001.225] I> 23) Base:0xf0100000 Size:0x00010000
[0001.229] I> 24) Base:0x00000000 Size:0x00000000
[0001.234] I> 25) Base:0x00000000 Size:0x00000000
[0001.238] I> 26) Base:0x00000000 Size:0x00000000
[0001.243] I> 27) Base:0x00000000 Size:0x00000000
[0001.247] I> 28) Base:0x84400000 Size:0x00400000
[0001.252] I> 29) Base:0x30000000 Size:0x00010000
[0001.256] I> 30) Base:0x278000000 Size:0x08000000
[0001.261] I> 31) Base:0x00000000 Size:0x00000000
[0001.265] I> 32) Base:0x276000000 Size:0x00600000
[0001.270] I> 33) Base:0x80000000 Size:0x70000000
[0001.274] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.278] I> 35) Base:0x00000000 Size:0x00000000
[0001.283] I> 36) Base:0x00000000 Size:0x00000000
[0001.287] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.292] I> 38) Base:0x84000000 Size:0x00400000
[0001.296] I> 39) Base:0x96000000 Size:0x02400000
[0001.301] I> 40) Base:0x85000000 Size:0x01200000
[0001.305] I> 41) Base:0x277000000 Size:0x00280000
[0001.310] I> 42) Base:0x00000000 Size:0x00000000
[0001.314] I> 43) Base:0x00000000 Size:0x00000000
[0001.319] GIC-SPI Target CPU: 4\r
[0001.322] Interrupts Init done\r
[0001.325] calling constructors\r
[0001.328] initializing heap
[0001.331] initializing threads\r
[0001.334] initializing timers\r
[0001.337] creating bootstrap completion thread\r
[0001.342] top of bootstrap2()\r
[0001.345] CPU: ARM Cortex A57\r
[0001.348] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100\r
[0001.353] initializing platform\r
[0001.357] I> Bl_dtb @0x8520f400
[0001.359] I> gpio framework initialized
[0001.365] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.374] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.382] I> GPIO framework and drivers are initialized.
[0001.387] I> Boot-device: eMMC
[0001.394] I> sdmmc bdev is already initialized
[0001.414] W> Cannot find any partition table for 00000003
[0001.432] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.437] W> opt-in fuse is not set, skip fuse_burning
[0001.442] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.448] E> Cannot find partition SMD
[0001.451] E> Cannot find partition SMD_b
[0001.455] I> A/B: bin_type (21) slot 1
[0001.459] E> A/B select failed
[0001.461] E> Kernel-dtb loading failed
[0001.465] initializing target\r
[0001.468] calling apps_init()\r
[0001.471] starting app kernel_boot_app\r
[0001.604] I> decompressor handler not found
[0001.608] I> Kernel type = Normal
[0001.611] I> Loading kernel-bootctrl from partition
[0001.616] E> Cannot find partition kernel-bootctrl
[0001.621] E> Cannot open partition kernel-bootctrl
[0001.625] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data
[0001.632] I> Loading kernel-bootctrl_b from partition
[0001.637] E> Cannot find partition kernel-bootctrl_b
[0001.642] E> Cannot open partition kernel-bootctrl_b
[0001.647] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data
[0001.654] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0001.661] I> ########## Fixed storage boot ##########
[0001.666] E> Cannot find partition SMD
[0001.669] E> Cannot find partition SMD_b
[0001.673] I> A/B: bin_type (24) slot 1
[0001.677] E> A/B select failed
[0001.679] E> Storage boot failed, err: 487391245
[0001.684] E> A/B loader failure
[0001.687] E> tegrabl_display_shutdown: display is not initialized
[0000.130] C> I2C command failed
[0000.133] C> block index = (4) and rail_id = (1)
[0000.138] C> Addr: Reg = [0xe8:0x07]: 336166925
[0000.255] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.263] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.268] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.273] I> bit @ 0xd480000
[0000.276] I> BR-BCT relocated to 0xd7020000
[0000.280] I> Boot-device: eMMC
[0000.284] I> sdmmc bdev is already initialized
[0000.288] I> pmic: reset reason (nverc)\t: 0x0
[0000.292] I> Reading GPT from 512 for device 00000003
[0000.298] I> Reading GPT from 8388096 for device 00000003
[0000.305] W> Cannot find any partition table for 00000003
[0000.310] E> tegrabl_partition_publish: exit error = 6834001
[0000.316] I> Reading GPT from 512 for device 00010003
[0000.322] I> Found 33 partitions in 00010003 device
[0000.328] I> A/B: bin_type (16) slot 1
[0000.331] I> Loading partition bpmp-fw_b at 0xd7800000
[0000.336] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.342] I> Addr: 0xd7800000, start-block: 58795193, num_blocks: 1
[0000.357] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.363] I> A/B: bin_type (17) slot 1
[0000.366] I> Loading partition bpmp-fw-dtb_b at 0xd79f0000
[0000.372] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.377] I> Addr: 0xd79f0000, start-block: 58797401, num_blocks: 1
[0000.391] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.569] I> BPMP-FW load address = 0xd7800000
[0000.573] I> BPMP-FW DTB load address = 0x5018e200
[0000.578] I> Loading SCE-FW ...
[0000.581] I> A/B: bin_type (12) slot 1
[0000.584] I> Loading partition sce-fw_b at 0xd7300000
[0000.589] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.595] I> Addr: 0xd7300000, start-block: 58802497, num_blocks: 1
[0000.604] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.610] I> Init SCE
[0000.612] I> Copy BTCM section
[0000.615] I> A/B: bin_type (13) slot 1
[0000.619] I> Loading partition cpu-bootloader_b at 0x96000000
[0000.624] I> Reading two headers - addr:0x96000000 blocks:1
[0000.630] I> Addr: 0x96000000, start-block: 58774529, num_blocks: 1
[0000.641] I> Binary(13) of size 283648 is loaded @ 0x96000000
[0000.647] I> A/B: bin_type (20) slot 1
[0000.650] I> Loading partition bootloader-dtb_b at 0x8520f400
[0000.656] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.662] I> Addr: 0x8520f400, start-block: 58776577, num_blocks: 1
[0000.673] I> Binary(20) of size 258944 is loaded @ 0x8520f400
[0000.678] I> MB2-params(VA) @ 0xd7000000
[0000.682] I> CPUBL-params(VA) @ 0xd7000000
[0000.686] I> CPUBL-params(PA) @ 0x277000000
[0000.690] I> CPU-BL loaded @ PA 0x96000000
[0000.694] I> Loading TOS ...
[0000.697] I> A/B: bin_type (14) slot 1
[0000.701] I> Loading partition secure-os_b at 0x8530f600
[0000.706] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.711] I> Addr: 0x8530f600, start-block: 58783745, num_blocks: 1
[0000.720] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.725] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.732] I> Erasing Monitor @ 0x8530f800
[0000.737] I> Unhalting SCE
[0000.739] I> Primary Memory Start:80000000 Size:70000000
[0000.745] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.751] I> Waypoint2-ACK: 0x52012714
[0000.755] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.114] I> Welcome to Cboot
[0001.117] I> Cboot Version: t186-40e13a32
[0001.121] I> CPU-BL Params @ 0x277000000
[0001.124] I>  0) Base:0x00000000 Size:0x00000000
[0001.129] I>  1) Base:0x277f00000 Size:0x00100000
[0001.133] I>  2) Base:0x277e00000 Size:0x00100000
[0001.138] I>  3) Base:0x277d00000 Size:0x00100000
[0001.142] I>  4) Base:0x277c00000 Size:0x00100000
[0001.147] I>  5) Base:0x277b00000 Size:0x00100000
[0001.152] I>  6) Base:0x277800000 Size:0x00200000
[0001.156] I>  7) Base:0x277400000 Size:0x00400000
[0001.161] I>  8) Base:0x277a00000 Size:0x00100000
[0001.165] I>  9) Base:0x277300000 Size:0x00100000
[0001.170] I> 10) Base:0x276800000 Size:0x00800000
[0001.174] I> 11) Base:0x30000000 Size:0x00040000
[0001.179] I> 12) Base:0xf0000000 Size:0x00100000
[0001.183] I> 13) Base:0x30040000 Size:0x00001000
[0001.187] I> 14) Base:0x30048000 Size:0x00001000
[0001.192] I> 15) Base:0x30049000 Size:0x00001000
[0001.196] I> 16) Base:0x3004a000 Size:0x00001000
[0001.201] I> 17) Base:0x3004b000 Size:0x00001000
[0001.205] I> 18) Base:0x3004c000 Size:0x00001000
[0001.210] I> 19) Base:0x3004d000 Size:0x00001000
[0001.214] I> 20) Base:0x3004e000 Size:0x00001000
[0001.218] I> 21) Base:0x3004f000 Size:0x00001000
[0001.223] I> 22) Base:0x00000000 Size:0x00000000
[0001.227] I> 23) Base:0xf0100000 Size:0x00010000
[0001.232] I> 24) Base:0x00000000 Size:0x00000000
[0001.236] I> 25) Base:0x00000000 Size:0x00000000
[0001.241] I> 26) Base:0x00000000 Size:0x00000000
[0001.245] I> 27) Base:0x00000000 Size:0x00000000
[0001.249] I> 28) Base:0x84400000 Size:0x00400000
[0001.254] I> 29) Base:0x30000000 Size:0x00010000
[0001.258] I> 30) Base:0x278000000 Size:0x08000000
[0001.263] I> 31) Base:0x00000000 Size:0x00000000
[0001.267] I> 32) Base:0x276000000 Size:0x00600000
[0001.272] I> 33) Base:0x80000000 Size:0x70000000
[0001.276] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.281] I> 35) Base:0x00000000 Size:0x00000000
[0001.285] I> 36) Base:0x00000000 Size:0x00000000
[0001.290] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.294] I> 38) Base:0x84000000 Size:0x00400000
[0001.299] I> 39) Base:0x96000000 Size:0x02400000
[0001.303] I> 40) Base:0x85000000 Size:0x01200000
[0001.307] I> 41) Base:0x277000000 Size:0x00280000
[0001.312] I> 42) Base:0x00000000 Size:0x00000000
[0001.316] I> 43) Base:0x00000000 Size:0x00000000
[0001.321] GIC-SPI Target CPU: 4\r
[0001.324] Interrupts Init done\r
[0001.327] calling constructors\r
[0001.330] initializing heap
[0001.333] initializing threads\r
[0001.336] initializing timers\r
[0001.339] creating bootstrap completion thread\r
[0001.344] top of bootstrap2()\r
[0001.347] CPU: ARM Cortex A57\r
[0001.350] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100\r
[0001.355] initializing platform\r
[0001.359] I> Bl_dtb @0x8520f400
[0001.362] I> gpio framework initialized
[0001.367] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.376] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.384] I> GPIO framework and drivers are initialized.
[0001.389] I> Boot-device: eMMC
[0001.396] I> sdmmc bdev is already initialized
[0001.416] W> Cannot find any partition table for 00000003
[0001.434] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.439] W> opt-in fuse is not set, skip fuse_burning
[0001.444] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.450] E> Cannot find partition SMD
[0001.454] E> Cannot find partition SMD_b
[0001.457] I> A/B: bin_type (21) slot 1
[0001.461] E> A/B select failed
[0001.464] E> Kernel-dtb loading failed
[0001.467] initializing target\r
[0001.470] calling apps_init()\r
[0001.473] starting app kernel_boot_app\r
[0001.606] I> decompressor handler not found
[0001.610] I> Kernel type = Normal
[0001.614] I> Loading kernel-bootctrl from partition
[0001.618] E> Cannot find partition kernel-bootctrl
[0001.623] E> Cannot open partition kernel-bootctrl
[0001.628] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data
[0001.635] I> Loading kernel-bootctrl_b from partition
[0001.639] E> Cannot find partition kernel-bootctrl_b
[0001.644] E> Cannot open partition kernel-bootctrl_b
[0001.649] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data
[0001.656] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0001.663] I> ########## Fixed storage boot ##########
[0001.668] E> Cannot find partition SMD
[0001.671] E> Cannot find partition SMD_b
[0001.675] I> A/B: bin_type (24) slot 1
[0001.679] E> A/B select failed
[0001.682] E> Storage boot failed, err: 487391245
[0001.686] E> A/B loader failure
[0001.689] E> tegrabl_display_shutdown: display is not initialized
[0000.122] C> I2C command failed
[0000.125] C> block index = (4) and rail_id = (1)
[0000.129] C> Addr: Reg = [0xe8:0x07]: 336166925
[0000.246] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.255] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.260] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.264] I> bit @ 0xd480000
[0000.267] I> BR-BCT relocated to 0xd7020000
[0000.271] I> Boot-device: eMMC
[0000.275] I> sdmmc bdev is already initialized
[0000.280] I> pmic: reset reason (nverc)\t: 0x0
[0000.284] I> Reading GPT from 512 for device 00000003
[0000.290] I> Reading GPT from 8388096 for device 00000003
[0000.296] W> Cannot find any partition table for 00000003
[0000.301] E> tegrabl_partition_publish: exit error = 6834001
[0000.307] I> Reading GPT from 512 for device 00010003
[0000.314] I> Found 33 partitions in 00010003 device
[0000.319] I> A/B: bin_type (16) slot 0
[0000.323] I> Loading partition bpmp-fw at 0xd7800000
[0000.327] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.333] I> Addr: 0xd7800000, start-block: 58793985, num_blocks: 1
[0000.348] I> Binary(16) of size 533504 is loaded @ 0xd7800000
[0000.354] I> A/B: bin_type (17) slot 0
[0000.357] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.362] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.368] I> Addr: 0xd79f0000, start-block: 58796401, num_blocks: 1
[0000.382] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.557] I> BPMP-FW load address = 0xd7800000
[0000.561] I> BPMP-FW DTB load address = 0x5018e200
[0000.566] I> Loading SCE-FW ...
[0000.569] I> A/B: bin_type (12) slot 0
[0000.573] I> Loading partition sce-fw at 0xd7300000
[0000.578] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.583] I> Addr: 0xd7300000, start-block: 58798401, num_blocks: 1
[0000.592] I> Binary(12) of size 125168 is loaded @ 0xd7300000
[0000.598] I> Init SCE
[0000.600] I> Copy BTCM section
[0000.603] I> A/B: bin_type (13) slot 0
[0000.607] I> Loading partition cpu-bootloader at 0x96000000
[0000.612] I> Reading two headers - addr:0x96000000 blocks:1
[0000.618] I> Addr: 0x96000000, start-block: 58773505, num_blocks: 1
[0000.629] I> Binary(13) of size 283648 is loaded @ 0x96000000
[0000.635] I> A/B: bin_type (20) slot 0
[0000.638] I> Loading partition bootloader-dtb at 0x8520f400
[0000.644] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.649] I> Addr: 0x8520f400, start-block: 58775553, num_blocks: 1
[0000.660] I> Binary(20) of size 258944 is loaded @ 0x8520f400
[0000.666] I> MB2-params(VA) @ 0xd7000000
[0000.670] I> CPUBL-params(VA) @ 0xd7000000
[0000.674] I> CPUBL-params(PA) @ 0x277000000
[0000.678] I> CPU-BL loaded @ PA 0x96000000
[0000.682] I> Loading TOS ...
[0000.685] I> A/B: bin_type (14) slot 0
[0000.688] I> Loading partition secure-os at 0x8530f600
[0000.693] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.699] I> Addr: 0x8530f600, start-block: 58777601, num_blocks: 1
[0000.707] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.713] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.720] I> Erasing Monitor @ 0x8530f800
[0000.724] I> Unhalting SCE
[0000.727] I> Primary Memory Start:80000000 Size:70000000
[0000.732] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.739] I> Waypoint2-ACK: 0x52012714
[0000.743] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.101] I> Welcome to Cboot
[0001.104] I> Cboot Version: t186-40e13a32
[0001.108] I> CPU-BL Params @ 0x277000000
[0001.112] I>  0) Base:0x00000000 Size:0x00000000
[0001.116] I>  1) Base:0x277f00000 Size:0x00100000
[0001.121] I>  2) Base:0x277e00000 Size:0x00100000
[0001.125] I>  3) Base:0x277d00000 Size:0x00100000
[0001.130] I>  4) Base:0x277c00000 Size:0x00100000
[0001.134] I>  5) Base:0x277b00000 Size:0x00100000
[0001.139] I>  6) Base:0x277800000 Size:0x00200000
[0001.143] I>  7) Base:0x277400000 Size:0x00400000
[0001.148] I>  8) Base:0x277a00000 Size:0x00100000
[0001.152] I>  9) Base:0x277300000 Size:0x00100000
[0001.157] I> 10) Base:0x276800000 Size:0x00800000
[0001.161] I> 11) Base:0x30000000 Size:0x00040000
[0001.166] I> 12) Base:0xf0000000 Size:0x00100000
[0001.170] I> 13) Base:0x30040000 Size:0x00001000
[0001.175] I> 14) Base:0x30048000 Size:0x00001000
[0001.179] I> 15) Base:0x30049000 Size:0x00001000
[0001.183] I> 16) Base:0x3004a000 Size:0x00001000
[0001.188] I> 17) Base:0x3004b000 Size:0x00001000
[0001.192] I> 18) Base:0x3004c000 Size:0x00001000
[0001.197] I> 19) Base:0x3004d000 Size:0x00001000
[0001.201] I> 20) Base:0x3004e000 Size:0x00001000
[0001.206] I> 21) Base:0x3004f000 Size:0x00001000
[0001.210] I> 22) Base:0x00000000 Size:0x00000000
[0001.214] I> 23) Base:0xf0100000 Size:0x00010000
[0001.219] I> 24) Base:0x00000000 Size:0x00000000
[0001.223] I> 25) Base:0x00000000 Size:0x00000000
[0001.228] I> 26) Base:0x00000000 Size:0x00000000
[0001.232] I> 27) Base:0x00000000 Size:0x00000000
[0001.237] I> 28) Base:0x84400000 Size:0x00400000
[0001.241] I> 29) Base:0x30000000 Size:0x00010000
[0001.245] I> 30) Base:0x278000000 Size:0x08000000
[0001.250] I> 31) Base:0x00000000 Size:0x00000000
[0001.254] I> 32) Base:0x276000000 Size:0x00600000
[0001.259] I> 33) Base:0x80000000 Size:0x70000000
[0001.263] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.268] I> 35) Base:0x00000000 Size:0x00000000
[0001.272] I> 36) Base:0x00000000 Size:0x00000000
[0001.277] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.281] I> 38) Base:0x84000000 Size:0x00400000
[0001.286] I> 39) Base:0x96000000 Size:0x02400000
[0001.290] I> 40) Base:0x85000000 Size:0x01200000
[0001.295] I> 41) Base:0x277000000 Size:0x00280000
[0001.299] I> 42) Base:0x00000000 Size:0x00000000
[0001.304] I> 43) Base:0x00000000 Size:0x00000000
[0001.308] GIC-SPI Target CPU: 4\r
[0001.311] Interrupts Init done\r
[0001.314] calling constructors\r
[0001.318] initializing heap
[0001.320] initializing threads\r
[0001.323] initializing timers\r
[0001.327] creating bootstrap completion thread\r
[0001.331] top of bootstrap2()\r
[0001.334] CPU: ARM Cortex A57\r
[0001.338] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100\r
[0001.343] initializing platform\r
[0001.346] I> Bl_dtb @0x8520f400
[0001.349] I> gpio framework initialized
[0001.354] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver
[0001.363] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver
[0001.371] I> GPIO framework and drivers are initialized.
[0001.376] I> Boot-device: eMMC
[0001.383] I> sdmmc bdev is already initialized
[0001.404] W> Cannot find any partition table for 00000003
[0001.421] I> Found 33 partitions in SDMMC_USER (instance 3)
[0001.426] W> opt-in fuse is not set, skip fuse_burning
[0001.431] I> Reserved memory at 0xfbe00000 for U-Boot relocation
[0001.437] I> A/B: bin_type (21) slot 0
[0001.441] I> Loading kernel-dtb from partition
[0001.445] I> Loading partition kernel-dtb at 0x80000000 from device(0x1)
[0001.462] I> Kernel_dtb @0x80000000
[0001.465] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.473] E> I2C: slave not found in slaves.
[0001.478] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false.
[0001.485] E> I2C_DEV: Failed to send register address 0x00000004.
[0001.491] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0.
[0001.500] E> tca9539_device_init: failed to write polar reg
[0001.506] E> tegrabl_tca9539_init: failed to init device!
[0001.511] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
[0001.518] E> I2C: slave not found in slaves.
[0001.522] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false.
[0001.530] E> I2C_DEV: Failed to send register address 0x00000004.
[0001.536] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0.
[0001.545] E> tca9539_device_init: failed to write polar reg
[0001.550] E> tegrabl_tca9539_init: failed to init device!
[0001.557] I> fixed regulator driver initialized
[0001.585] I> register 'maxim' power off handle
[0001.590] I> virtual i2c enabled
[0001.594] I> registered 'maxim,max77620' pmic
[0001.598] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.608] I> Find /i2c@c250000's alias i2c7
[0001.612] I> Reading eeprom i2c=7 address=0x50
[0001.641] I> Device at /i2c@c250000:0x50
[0001.645] I> Reading eeprom i2c=7 address=0x57
[0001.649] E> I2C: slave not found in slaves.
[0001.653] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0001.661] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.667] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7.
[0001.676] E> eeprom: Failed to read I2C slave device
[0001.681] I> Eeprom read failed 0x3526070d
[0001.686] I> Find /i2c@c240000's alias i2c1
[0001.690] I> Reading eeprom i2c=1 address=0x51
[0001.695] E> I2C: slave not found in slaves.
[0001.699] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true.
[0001.707] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.713] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1.
[0001.722] E> eeprom: Retry to read I2C slave device.
[0001.727] E> I2C: slave not found in slaves.
[0001.731] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true.
[0001.739] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.745] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1.
[0001.754] E> eeprom: Failed to read I2C slave device
[0001.759] I> Eeprom read failed 0x3526070d
[0001.763] I> Find /i2c@3160000's alias i2c0
[0001.767] I> Reading eeprom i2c=0 address=0x50
[0001.772] E> I2C: slave not found in slaves.
[0001.776] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[0001.784] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.790] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0.
[0001.799] E> eeprom: Failed to read I2C slave device
[0001.804] I> Eeprom read failed 0x3526070d
[0001.808] I> Find /i2c@3180000's alias i2c2
[0001.812] I> Reading eeprom i2c=2 address=0x54
[0001.817] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.821] C> GPIO driver for chip_id 0x2 could not be found
[0001.827] E> cam_eeprom_read: Can't get gpio driver
[0001.831] I> Eeprom read failed 0x4d4d000d
[0001.835] I> Reading eeprom i2c=2 address=0x57
[0001.840] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.844] C> GPIO driver for chip_id 0x2 could not be found
[0001.850] E> cam_eeprom_read: Can't get gpio driver
[0001.855] I> Eeprom read failed 0x4d4d000d
[0001.858] I> create_pm_ids: id: 3310-1000-B02-E, len: 15
[0001.864] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.883] E> cannot find any other nvdisp nodes
[0001.887] E> no valid display unit config found in dtb
[0001.893] W> display init failed
[0001.896] initializing target\r
[0001.899] calling apps_init()\r
[0001.902] starting app kernel_boot_app\r
[0002.035] I> decompressor handler not found
[0002.039] I> Kernel type = Normal
[0002.042] I> Loading kernel-bootctrl from partition
[0002.047] E> Cannot find partition kernel-bootctrl
[0002.052] E> Cannot open partition kernel-bootctrl
[0002.056] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data
[0002.063] I> Loading kernel-bootctrl_b from partition
[0002.068] E> Cannot find partition kernel-bootctrl_b
[0002.073] E> Cannot open partition kernel-bootctrl_b
[0002.078] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data
[0002.085] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0002.092] I> ########## Fixed storage boot ##########
[0002.097] I> A/B: bin_type (24) slot 0
[0002.112] I> Boot image size read from image header: 974fd
[0002.118] I> Boot image load address: 0x80400000
[0002.122] I> Loading kernel from partition
[0002.126] I> Loading partition kernel at 0x80400000 from device(0x1)
[0002.897] I> Validate kernel ...
[0002.900] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000
[0002.908] I> kernel-dtb is already loaded
[0002.912] I> Validate kernel-dtb ...
[0002.915] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000
[0002.922] I> Checking boot.img header magic ... [0002.927] I> [OK]
[0002.928] I> Kernel hdr @0x80400000
[0002.932] I> Kernel dtb @0x80000000
[0002.935] I> decompressor handler not found
[0002.939] I> Copying kernel image (619773 bytes) from 0x80400800 to 0x80600000 ... [0002.946] I> Done
[0002.948] I> Move ramdisk (len: 0) from 0x80498000 to 0x947d0000
[0002.955] I> Updated bpmp info to DTB
[0002.960] I> Ramdisk: Base: 0x947d0000; Size: 0x0
[0002.965] I> Updated initrd info to DTB
[0002.968] W> WARN: Fail to override "console=none" in commandline
[0002.974] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0002.981] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0002.989] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params
[0002.996] I> disabled_core_mask: 0xffffff0c
[0003.000] I> Active slot suffix: 
[0003.003] I> add_boot_slot_suffix: slot_suffix = 
[0003.007] I> Linux Cmdline: console=ttyS0,115200 fbcon=map:0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031623.1 bl_prof_dataptr=0x10000@0x277040000 sdhci_tegra.en_boot_part_access=1 
[0003.038] I> Updated bootarg info to DTB
[0003.042] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c5:c0:39
[0003.048] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c5:c0:3a
[0003.055] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c5:c0:3b
[0003.062] E> Found no plugin manager ids in source DT
[0003.067] W> Add plugin manager ids from board info
[0003.072] W> "plugin-manager" doesn\'t exist, creating
[0003.077] W> "ids" doesn\'t exist, creating
[0003.081] W> "connection" doesn\'t exist, creating
[0003.085] W> "configs" doesn\'t exist, creating
[0003.089] I> create_pm_ids: id: 3310-1000-B02-E, len: 15
[0003.095] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0003.106] I> Adding plugin-manager/ids/3310-1000-B02=/i2c@c250000:module@0x50
[0003.113] W> "i2c@c250000" doesn\'t exist, creating
[0003.117] W> "module@0x50" doesn\'t exist, creating
[0003.123] I> Adding plugin-manager/ids/3310-1000-B02-E
[0003.129] I> Adding plugin-manager/configs/3310-mem-type 00
[0003.135] I> Adding plugin-manager/configs/3310-power-config 00
[0003.141] I> Adding plugin-manager/configs/3310-misc-config 00
[0003.147] I> Adding plugin-manager/configs/3310-modem-config 00
[0003.153] I> Adding plugin-manager/configs/3310-touch-config 00
[0003.159] I> Adding plugin-manager/configs/3310-display-config 00
[0003.165] I> Adding plugin-manager/cvm
[0003.168] W> "chip-id" doesn\'t exist, creating
[0003.173] I> Adding plugin-manager/chip-id/A02P
[0003.177] W> "odm-data" doesn\'t exist, creating
[0003.182] I> Adding /chosen/plugin-manager/odm-data
[0003.190] I> added [base:0x80000000, size:0x70000000] to /memory
[0003.196] I> added [base:0xf0200000, size:0x185e00000] to /memory
[0003.202] I> added [base:0x276600000, size:0x200000] to /memory
[0003.208] I> Updated memory info to DTB
[0003.212] E> add_disp_param: failed to get display params for du=0
[0003.219] W> "reset" doesn\'t exist, creating
[0003.223] W> "pmc-reset-reason" doesn\'t exist, creating
[0003.229] W> "pmic-reset-reason" doesn\'t exist, creating
[0003.235] I> Adding ecid(00000001644227c61c00000018fe8040) to DT
[0003.240] I> disabled_core_mask: 0xffffff0c
[0003.249] I> Add serial number:0423518079847 as DT property
[0003.257] I> Plugin-manager override starting
[0003.262] I> node /plugin-manager/fragement@0 matches
2021-06-11 11:56:35,502,502 - squeaky.serial - IO     <-- - '[0003.270] I> node /plug'
in-manager/fragement@4 matches
[0003.280] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches
[0003.296] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches
[0003.304] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches
[0003.312] I> node /plugin-manager/fragment-devslp@0 matches
[0003.321] I> node /plugin-manager/fragment-500-pcie-config matches
[0003.332] I> node /plugin-manager/fragment-500-xusb-config matches
[0003.346] I> node /plugin-manager/fragment-p3310-c00-comm matches
[0003.357] I> node /plugin-manager/fragment-p3310-c00-pmic matches
[0003.365] I> node /plugin-manager/fragment-p3310-c01 matches
[0003.373] I> node /plugin-manager/fragment-p3310-c03 matches
[0003.382] I> Disable plugin-manager status in FDT
[0003.387] I> Plugin-manager override finished successfully
[0003.392] I> tegrabl_load_kernel_and_dtb: Done
[0003.396] E> tegrabl_display_clear: display is not initialized
[0003.402] W> Boot logo display failed...
[0003.406] E> Cannot find partition SMD
[0003.409] E> Cannot find partition SMD_b
[0003.413] I> Kernel EP: 0x80600000, DTB: 0x80000000


U-Boot 2020.07 (Mar 19 2021 - 17:01:34 +0000)

SoC: tegra186
Model: NVIDIA P2771-0000-500
Board: NVIDIA P2771-0000
2021-06-11 11:56:35,707,707 - squeaky.serial - IO     <-- - 'DRAM:  '
7.8 GiB
MMC:   sdhci@3400000: 1, sdhci@3460000: 0
2021-06-11 11:56:35,808,808 - squeaky.serial - IO     <-- - 'Loading Environment from EXT4... '
** File not found uboot.env **

** Unable to read "uboot.env" from mmc0:5 **
In:    serial
Out:   serial
Err:   serial
Net:   
Warning: ethernet@2490000 using MAC address from DT
eth0: ethernet@2490000
2021-06-11 11:56:35,962,962 - squeaky.serial - IO     <-- - 'Hit any key to stop autoboot:  1 '
\x08\x08\x08 0 
Retrieving file: /boot/extlinux/extlinux-mmcblk0p1.conf
384 bytes read in 17 ms (21.5 KiB/s)
1:\tprimary kernel
Retrieving file: /boot/Image
23549960 bytes read in 595 ms (37.7 MiB/s)
append: console=ttyS0,115200 fbcon=map:0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031623.1 bl_prof_dataptr=0x10000@0x277040000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 video=tegrafb:800x1280-24 fbcon=rotate:3 console=ttyS0,115200 vt.global_cursor_default=0 fsck.mode=auto fsck.repair=preen loglevel=7
Retrieving file: /boot/squeaky-lemur-protoa.dtb
258955 bytes read in 22 ms (11.2 MiB/s)
## Flattened Device Tree blob at 88400000
   Booting using the fdt blob at 0x88400000
ERROR: reserving fdt memory region failed (addr=0 size=0)
ERROR: reserving fdt memory region failed (addr=0 size=0)
ERROR: reserving fdt memory region failed (addr=0 size=0)
   Using Device Tree in place at 0000000088400000, end 000000008844238a
copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000...
copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000...
copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000...

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.9.140 (oe-user@oe-host) (gcc version 9.3.0 (GCC) ) #1 SMP PREEMPT Mon Apr 19 16:07:03 UTC 2021
[    0.000000] Boot CPU: AArch64 Processor [411fd073]
[    0.000000] OF: fdt:memory scan node memory@80000000, reg size 48,
[    0.000000] OF: fdt: - 80000000 ,  70000000
[    0.000000] OF: fdt: - f0200000 ,  185e00000
[    0.000000] OF: fdt: - 276600000 ,  200000
[    0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '')
[    0.000000] bootconsole [uart8250] enabled