ÿâ
[0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses.
[0000.032] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1)
[0000.038] I> Boot-mode: Coldboot
[0000.041] I> Platform: Silicon
[0000.044] I> Chip revision : A02P
[0000.047] I> Bootrom patch version : 15 (correctly patched)
[0000.052] I> ATE fuse revision : 0x200
[0000.055] I> Ram repair fuse : 0x0
[0000.058] I> Ram Code : 0x0
[0000.061] I> rst_source: 0x0, rst_level: 0x0
[0000.066] I> Boot-device: QSPI (instance: 0)
[0000.070] I> Qspi flash params source = brbct
[0000.074] I> Qspi clock source : pllp
[0000.077] I> Qspi-0 initialized successfully
[0000.081] I> Boot chain mechanism: A/B
[0000.085] I> Current Boot-Chain Slot: 0
[0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0
[0000.093] I> Qspi flash params source = brbct
[0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT.
[0000.107] I> Temperature = 42500
[0000.110] W> Skipping boost for clk: BPMP_CPU_NIC
[0000.115] W> Skipping boost for clk: BPMP_APB
[0000.119] W> Skipping boost for clk: AXI_CBB
[0000.122] W> Skipping boost for clk: AON_CPU_NIC
[0000.127] W> Skipping boost for clk: CAN1
[0000.130] W> Skipping boost for clk: CAN2
[0000.135] I> Boot-device: QSPI (instance: 0)
[0000.139] I> Qspi flash params source = mb1bct
[0000.143] I> Qspi clock source : pllc_out0
[0000.147] I> Qspi-0 reinitialized
[0000.150] I> Qspi flash params source = mb1bct
[0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0000.170] W>  Thermal config not found in BCT
[0000.178] W>  MEMIO rail config not found in BCT
[0000.188] I> Qspi flash params source = mb1bct
[0000.201] I> Qspi flash params source = mb1bct
[0000.235] I> Qspi flash params source = mb1bct
[0000.799] I> Qspi flash params source = mb1bct
[0000.816] I> Qspi flash params source = mb1bct
[0000.855] W>  Platform config not found in BCT
[0000.882] I> Qspi flash params source = mb1bct
[0000.908] I> MB1 done

ÿýÿàmain enter
SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27
HW Function test
Start Scheduler.
in late init
ÿâ
[0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4)
[0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0000.918] I> Default Heap @ [0xd486400 - 0xd48a400]
[0000.919] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0000.925] W> device prod register failed
[0000.929] I> gpio framework initialized
[0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0000.947] I> No valid sdcard_params in mb1_bct
[0000.952] I> Boot_device: QSPI_FLASH instance: 0
[0000.956] I> qspi flash-0 params source = boot args
[0000.962] I> QSPI-0l initialized successfully
[0000.965] I> sdmmc-3 params source = safe params
[0001.362] I> sdmmc DDR50 mode
[0001.380] I> Found 41 partitions in QSPI_FLASH (instance 0)
[0001.398] W> Cannot find any partition table for 00000003
[0001.399]  > PARTITION_MANAGER: Failed to publish partition.
[0001.414] I> Found 19 partitions in SDMMC_USER (instance 3)
[0001.416] I> Active Boot chain : 0
[0002.087] I> Relocating BR-BCT
[0002.088]  > DEVICE_PROD: device prod is not initialized.
[0002.393] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008
[0002.394] I> [0] START: 0x80000000, SIZE: 0x2f000000
[0002.395] I> [1] START: 0xaf010000, SIZE: 0x18bf0000
[0002.395] I> [2] START: 0xc7d00000, SIZE: 0xc0000
[0002.396] I> [3] START: 0xca000000, SIZE: 0x800000
[0002.396] I> dram_block larger than 80000000
[0002.399] I> [4] START: 0x100000000, SIZE: 0x180000000
[0002.410] I> Setting NS memory ranges to OP-TEE dtb finished.
[0002.413] I> found decompressor handler: lz4
[0002.642] I> EKB detected (length: 0x410) @ VA:0x52709400
[0002.643] I> Setting EKB blob info to OPTEE dtb finished.
ÿäNOTICE:  BL31: v2.6(release):4fa405dbd
NOTICE:  BL31: Built : 20:16:55, Aug 10 2022
I/TC: 
ÿâ
bpmp: init
bpmp: tag is 128431eec76692047e1ac1ebc0392266
sku_dt_init: not sku 0x00
ÿäI/ÿâclk_early initialized
ÿäTC: ÿâmail_early initialized
ÿäNoÿâfuse initialized
hwwdt initialized
ÿän-seÿât194_ec_get_ec_list: found 45 ecs
ÿäcure externÿâec initialized
vmon_setup_monitors: found 3 monitors
vmon initialized
ÿäal ÿâadc initialized
ÿäDÿâfmon_populate_monitors: found 73 monitors
ÿäT found
ÿâfmon initialized
mc initialized
reset initialized
nvhs initialized
uphy_early initialized
emc_early initialized
392 clocks registered
clk initialized
io_dpd initialized
thermal initialized
thermal_mrq initialized
i2c initialized
vrmon_dt_init: vrmon node not found
vrmon_chk_boot_state: found 0 rail monitors
vrmon initialized
regulator initialized
avfs_clk_platform initialized
soctherm initialized
aotag initialized
powergate initialized
dvs initialized
pm initialized
suspend initialized
pg_late initialized
pg_mrq_init initialized
strap initialized
nvl initialized
emc initialized
emc_mrq initialized
clk_dt initialized
tj_init initialized
uphy_dt initialized
uphy_mrq initialized
uphy initialized
ec_swd_poll_start: 281 reg polling start w period 47 ms
ec_late initialized
hwwdt_late initialized
reset_mrq initialized
ec_mrq initialized
fmon_mrq initialized
clk_mrq initialized
avfs_mrq initialized
mail_mrq initialized
i2c_mrq initialized
tag_mrq initialized
console_mrq initialized
mrq initialized
clk_sync_fmon_post initialized
ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized
ÿägÿânoc_late initialized
ÿä ÿâpm_post initialized
dbells initialized
ÿä11 ÿâdmce initialized
cvc initialized
ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized
ÿä2022ÿâavfs_clk_platform_post initialized
ÿä aÿâcvc_late initialized
regulator_post initialized
ÿäarch6ÿârm initialized
console_late initialized
clk_dt_post initialized
mc_reg initialized
ÿä4
I/TC: WARNINÿâpg_post initialized
profile initialized
fuse_late initialized
extras_post initialized
bpmp: init complete
entering main console loop
] ÿäG: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
ÿá
[0003.262] I> Welcome to NVDisp-Init
[0003.263] I> NVDisp-Init version: t194-f9ecfedc
[0003.263] I> CPU-BL Params @ 0xca020000
[0003.263] I>  0) Base:0x00000000 Size:0x00000000
[0003.264] I>  1) Base:0xc8300000 Size:0x00100000
[0003.264] I>  2) Base:0xc9800000 Size:0x00200000
[0003.264] I>  3) Base:0xc8600000 Size:0x00200000
[0003.267] I>  4) Base:0xc8200000 Size:0x00100000
[0003.271] I>  5) Base:0xc8100000 Size:0x00100000
[0003.276] I>  6) Base:0xc9400000 Size:0x00400000
[0003.280] I>  7) Base:0xc9000000 Size:0x00400000
[0003.285] I>  8) Base:0xc8000000 Size:0x00100000
[0003.289] I>  9) Base:0xc7f00000 Size:0x00100000
[0003.294] I> 10) Base:0xca800000 Size:0x00800000
[0003.298] I> 11) Base:0x40000000 Size:0x00040000
[0003.302] I> 12) Base:0xc7e00000 Size:0x00100000
[0003.307] I> 13) Base:0x40046000 Size:0x00002000
[0003.311] I> 14) Base:0x40048000 Size:0x00002000
[0003.316] I> 15) Base:0xaf000000 Size:0x00004000
[0003.320] I> 16) Base:0x4004a000 Size:0x00002000
[0003.325] I> 17) Base:0xc7c00000 Size:0x00100000
[0003.329] I> 18) Base:0x4004c000 Size:0x00002000
[0003.334] I> 19) Base:0xc9a00000 Size:0x00600000
[0003.338] I> 20) Base:0x4004e000 Size:0x00002000
[0003.343] I> 21) Base:0xc7dc0000 Size:0x0000c000
[0003.347] I> 22) Base:0x00000000 Size:0x00000000
[0003.352] I> 23) Base:0xc7de0000 Size:0x00020000
[0003.356] I> 24) Base:0xcc000000 Size:0x02000000
[0003.361] I> 25) Base:0x40050000 Size:0x00002000
[0003.365] I> 26) Base:0x40040000 Size:0x00006000
[0003.369] I> 27) Base:0xc8c00000 Size:0x00400000
[0003.374] I> 28) Base:0xc8400000 Size:0x00200000
[0003.378] I> 29) Base:0xc8800000 Size:0x00400000
[0003.383] I> 30) Base:0xc7dd0000 Size:0x00010000
[0003.387] I> 31) Base:0x00000000 Size:0x00000000
[0003.392] I> 32) Base:0xf8000000 Size:0x08000000
[0003.396] I> 33) Base:0xce000000 Size:0x2a000000
[0003.401] I> 34) Base:0xcb000000 Size:0x01000000
[0003.405] I> 35) Base:0xae000000 Size:0x01000000
[0003.410] I> 36) Base:0xa0000000 Size:0x0e000000
[0003.414] I> 37) Base:0xca000000 Size:0x00800000
[0003.419] I> 38) Base:0x80000000 Size:0x20000000
[0003.423] I> 39) Base:0xb0000000 Size:0x08000000
[0003.427] I> 40) Base:0x00000000 Size:0x00000000
[0003.432] I> 41) Base:0x00000000 Size:0x00000000
[0003.436] I> 42) Base:0x00000000 Size:0x00000000
[0003.441] I> 43) Base:0x00000000 Size:0x00000000
[0003.445] I> 44) Base:0x00000000 Size:0x00000000
[0003.450] I> 45) Base:0x00000000 Size:0x00000000
[0003.454] GIC-SPI Target CPU: 0
[0003.457] Interrupts Init done
[0003.460] calling constructors
[0003.463] initializing heap
[0003.466] I> Heap: [0xa0960000 ... 0xadf00000]
[0003.470] initializing threads
[0003.473] initializing timers
[0003.476] creating bootstrap completion thread
[0003.480] top of bootstrap2()
[0003.483] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000
[0003.487] initializing platform
[0003.490] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0003.496] W> device prod register failed
[0003.499] I> Bl_dtb @0xadf00000
[0003.502] I> gpio framework initialized
[0003.514] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0003.518] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0003.525] I> fixed regulator driver initialized
[0003.545] I> register 'maxim' power off handle
[0003.547] I> virtual i2c enabled
[0003.548] I> registered 'maxim,max20024' pmic
[0003.548] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver
[0003.549] I> Boot-device: QSPI
[0003.549] I> Boot_device: QSPI_FLASH instance: 0
[0003.551] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000
[0003.562] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!!
[0003.569] I> QSPI source rate = 204000 Khz
[0003.572] I> Requested rate for QSPI clock = 34000 Khz
[0003.577] I> BPMP-set rate for QSPI clk = 34000 Khz
[0003.582] I> tx_clk_tap_delay : 0
[0003.585] I> rx_clk_tap_delay : 16
[0003.588] I> QSPI Flash Size = 32 MB
[0003.596] I> Qspi initialized successfully
[0003.596] I> qspi flash-0 params source = boot args
[0003.601] W> No board IDs available
[0003.604] E> Failed to get board id info!
[0003.609] I> sdmmc-3 params source = safe params
[0003.617] I> Found 41 partitions in QSPI_FLASH (instance 0)
[0003.618] W> Cannot find any partition table for 00000003
[0003.623] E> Failed to publish 00000003
[0003.632] I> Found 19 partitions in SDMMC_USER (instance 3)
[0003.650] I> regulator 'vdd-hdmi-5v0' already enabled
[0003.658] I> regulator 'vdd-hdmi-5v0' already enabled
[0003.658] E> tegrabl_display_init_regulator: hdmi cable is not connected
[0003.659] E> tegrabl_display_get_pdata, failed to parse dtb settings
[0003.668] E> invalid display type
[0003.669] E> cannot find any other nvdisp nodes
[0003.669] E> no valid display unit config found in dtb
[0003.672] W> display init failed
[0003.672] initializing target
[0003.673] calling apps_init()
[0003.675] starting app kernel_boot_app
[0003.679] I> Kernel type = Normal

Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00)