*************** NvShell Initialization Start****************** DRIVE-V6.0.5-P3710-AFW-Aurix-StepB-5.06.05 Compilation date: Oct 19 2022, 01:12:33 Enter 'help' to see the available commands. *************** NvShell Initialized ************************* Press 'Enter' for NvShell prompt ************************************************************* MCU_FOH: E2E Initialized MCU_FOH: Initialization done INFO: MCU_PLTFPWRMGR: Power-on Triggered... INFO: NvMCU_OrinTMON: toggle check of local and remote sensor successfull Check for VRS10... Check for VRS10... Check for VRS11-1... Check for VRS11-1... Check for VRS11-1... Check for VRS11-1... Check for VRS11-2... Check for VRS11-2... Check for VRS11-2... Check for VRS11-2... Check for VRS10... Check for VRS10... Check for VRS10... Check for VRS10... INFO: NvMCU_OrinTMON: Orin Temperature sensor initialized INFO: NVMCU_ORINPWRCTRL: FUNC_NIRQ continuous monitoring Enabled...! INFO: NVMCU_ORINPWRCTRL: Tegra x1 Boot Chain: A INFO: SftyMon_tmon: Board Temperature sensor initialized INFO: MCU_PLTFPWRMGR: Board TMON enabled .... INFO: MCU_PLTFPWRMGR: Orin TMON enabled .... MCU_FOH: MCU FOH : Initiate SOC Error Pin Monitoring & SPI communication INFO: MCU_PltfPwrMgr: Linkup status is not active INFO: MCU_PltfPwrMgr: 88Q5072 OAK Link Active INFO: Marvell Switch: p3710_oak_init INFO: Marvell Switch: Device ID in the Spruce slave address 0x8 is not as expect ed INFO: Marvell Switch: Expected 0xf130/0xf131/0xf132/0xf133, but reading back 0xa 722 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x3 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x3 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x1 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x0 INFO: Marvell Switch: Port restrictions for Aurix port(P8) enabled INFO: Marvell Switch: p3710_spruce_init INFO: Marvell Switch: Spruce device with chip revision B4 detected on SMI addres s 0x1. INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x0 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x0 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x3 INFO: Marvell Switch: IfxEth_Marvell_Switch_write_reg: write the extend 16 bit d ata 0x3 INFO: MCU_PltfPwrMgr: Switch Init INFO: Marvell Phy: Initial 88Q2112 config INFO: Marvell Phy: Start init 88Q222x slave address 1 at group 1 INFO: Marvell Phy: Apply Legacy mode INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 1G, slave address 1 at group 1, API 1.10 INFO: Marvell Phy: Start init 88Q222x slave address 2 at group 1 INFO: Marvell Phy: Apply Legacy mode INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 1G, slave address 2 at group 1, API 1.10 INFO: Marvell Phy: Start init 88Q222x slave address 3 at group 1 INFO: Marvell Phy: Apply Legacy mode INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 1G, slave address 3 at group 1, API 1.10 INFO: Marvell Phy: Start init 88Q222x slave address 4 at group 1 INFO: Marvell Phy: Apply Legacy mode INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 1G, slave address 4 at group 1, API 1.10 INFO: Marvell Phy: Start init 88Q222x slave address 5 at group 1 MCU_FOH: SOC error pin is asserted MCU_FOH: SOC error pin is de-asserted MCU_FOH: SOC error pin is asserted INFO: Marvell Phy: Apply Legacy mode INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 1G, slave address 5 at group 1, API 1.10 INFO: Marvell Phy: Start init 88Q222x slave address 6 at group 1 INFO: Marvell Phy: Apply Legacy mode INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 1G, slave address 6 at group 1, API 1.10 INFO: Marvell Phy: Start init 88Q222x slave address 7 at group 1 MCU_FOH: Spi Transmit Started MCU_FOH: ErrReport: ErrorCode-0x28d1 ReporterId-0xe04c Error_Attribute-0x0 Times tamp-0x5b38484 MCU_FOH: Periodic Report: KeyOfSeed-0xffff MCU_FOH: Periodic Report[0]:SystemFailureId-0xabcd, MaturationState-0xef, Failur e_Attribute-0x22 MCU_FOH: Periodic Report[9]:SystemFailureId-0x1234, MaturationState-0x56, Failur e_Attribute-0xee INFO: Marvell Phy: Apply Legacy mode INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 1G, slave address 7 at group 1, API 1.10 INFO: Marvell Phy: Start init 88Q222x slave address 1 at group 0 INFO: Marvell Phy: Apply Legacy mode INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 1G, slave address 1 at group 0, API 1.10 INFO: Marvell Phy: Start init 88Q222x slave address 2 at group 0 INFO: Marvell Phy: Initialed 88Q2112 A2 silicon 100M, slave address 2 at group 0 , API 1.10 INFO: MCU_PltfPwrMgr: PHYs Init INFO: MCU_PltfPwrMgr: StbM Init INFO: MCU_PLTFPWRMGR: Power-up sequence is complete ! INFO: MCU_PLTFPWRMGR: DL Ready drive to HIGH ! Power on the system MCU_FOH: ErrReport: ErrorCode-0x28f4 ReporterId-0xe04c Error_Attribute-0x0 Times tamp-0xaed444c MCU_FOH: ErrReport: ErrorCode-0x28f2 ReporterId-0xe04c Error_Attribute-0x0 Times tamp-0xb623df4 INFO: SftyMon_IoHwAbs: PG_VRS11 monitoring started... INFO : MCU_ISTMGR: IST Manager initialized to send/receive commands INFO : IST_TESTAPP: IST Result Ready to fetch INFO: MCU_SWC_FanControl: max_rpm fan2 : 0 INFO: MCU_SWC_FanControl: maxrpm of fan2 has more than 50 percent deviation agai nst rated maxrpm MCU_FOH: ErrReport: ErrorCode-0x18550080 ReporterId-0x8001 Error_Attribute-0x0 T imestamp-0x2f3891d4 MCU_FOH: ErrReport: ErrorCode-0x89abcdef ReporterId-0x8013 Error_Attribute-0x0 T imestamp-0x2f38a10c MCU_FOH: ErrReport: ErrorCode-0x28da ReporterId-0xe04c Error_Attribute-0x0 Times tamp-0x2f9df234 MCU_FOH: ErrReport: ErrorCode-0x18550080 ReporterId-0x8001 Error_Attribute-0x0 T imestamp-0x44a9e21c MCU_FOH: ErrReport: ErrorCode-0x18550080 ReporterId-0x8001 Error_Attribute-0x0 T imestamp-0x44aa5db4 MCU_FOH: ErrReport: ErrorCode-0x18550080 ReporterId-0x8001 Error_Attribute-0x0 T imestamp-0x44aae494 MCU_FOH: ErrReport: ErrorCode-0x18550080 ReporterId-0x8001 Error_Attribute-0x0 T imestamp-0x4636b254 MCU_FOH: ErrReport: ErrorCode-0x18550080 ReporterId-0x8001 Error_Attribute-0x0 T imestamp-0x46372c74