[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2533) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Nov 5 13:43:53 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb3000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29500(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3570364K/4159488K available (15230K kernel code, 2914K rwdata, 6628K rodata, 8576K init, 609K bss, 113988K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095e0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095e0000 - 0xffffff8009e40000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a118808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a118808 - 0xffffff800a1b0dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001817] Console: colour dummy device 80x25 [ 0.002654] console [tty0] enabled [ 0.002681] kmemleak: Kernel memory leak detector disabled [ 0.002712] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002742] pid_max: default: 32768 minimum: 301 [ 0.003200] Security Framework initialized [ 0.003434] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003455] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004651] ftrace: allocating 46939 entries in 184 pages [ 0.174309] sched-energy: CPU device node has no sched-energy-costs [ 0.174345] ASID allocator initialised with 65536 entries [ 0.211680] tegra-id: chipid=22117. [ 0.211724] tegra-id: opt_subrevision=0. [ 0.211753] Tegra Speedo/IDDQ fuse revision 4 [ 0.211770] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211786] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.211803] Tegra: CPU Speedo Value 2103, SoC Speedo Value 1985, GPU Speedo Value 2112 [ 0.211824] Tegra: CPU IDDQ Value 2172, SoC IDDQ Value 2448, GPU IDDQ Value 3075 [ 0.211859] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.211887] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.211922] DTB Build time: Nov 5 2019 13:47:54 [ 0.261048] CPU1: Booted secondary processor [411fd071] [ 0.292971] CPU2: Booted secondary processor [411fd071] [ 0.324945] CPU3: Booted secondary processor [411fd071] [ 0.325028] Brought up 4 CPUs [ 0.325090] SMP: Total of 4 processors activated. [ 0.325110] CPU features: detected feature: 32-bit EL0 Support [ 0.325382] CPU: All CPU(s) started at EL2 [ 0.325415] alternatives: patching kernel code [ 0.333558] devtmpfs: initialized [ 0.371125] Initilizing CustomIPI irq domain [ 0.371541] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.371589] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.382109] pinctrl core: initialized pinctrl subsystem [ 0.382792] OS set in device tree is not L4T. [ 0.383212] regulator-dummy: no parameters [ 0.383502] Initializing plugin-manager [ 0.383617] Plugin module not found [ 0.383854] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.384401] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.384919] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.385682] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [ 0.386134] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [ 0.386780] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.392059] NET: Registered protocol family 16 [ 0.395726] pstore: using zlib compression [ 0.396413] console [pstore-1] enabled [ 0.396431] pstore: Registered ramoops as persistent store backend [ 0.396450] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409067] cpuidle: using governor menu [ 0.413499] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.415168] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000) [ 0.415212] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417544] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.420131] tegra_powergate_init: DONE [ 0.420170] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.420207] DTB Build time: Nov 5 2019 13:47:54 [ 0.422079] Tegra reboot handler registered. [ 0.426559] iommu: Adding device tegra-carveouts to group 0 [ 0.426726] platform tegra-carveouts: domain=ffffffc0f9ba5318 allocates as[0]=ffffffc0f9bd40a8 [ 0.427098] iommu: Adding device smmu_test to group 1 [ 0.427165] platform smmu_test: domain=ffffffc0f9ba5558 allocates as[0]=ffffffc0f9bd4110 [ 0.427977] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.428049] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.428118] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.428141] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428175] mc-err: mcerr ops are set to t21x [ 0.437523] iommu: Adding device 70090000.xusb to group 2 [ 0.437852] iommu: Adding device 70006000.serial to group 3 [ 0.437931] platform 70006000.serial: domain=ffffffc0f9453c18 allocates as[0]=ffffffc0f9bd4178 [ 0.438375] iommu: Adding device 70006040.serial to group 4 [ 0.438640] iommu: Adding device 70006200.serial to group 5 [ 0.438846] iommu: Adding device sound to group 6 [ 0.438911] platform sound: domain=ffffffc0f94be198 allocates as[0]=ffffffc0f9bd41e0 [ 0.439478] iommu: Adding device 7000d400.spi to group 7 [ 0.439750] iommu: Adding device 7000d600.spi to group 8 [ 0.440122] iommu: Adding device 50000000.host1x to group 9 [ 0.440414] iommu: Adding device 54080000.vi to group 10 [ 0.440823] iommu: Adding device 54600000.isp to group 11 [ 0.441121] iommu: Adding device 54680000.isp to group 12 [ 0.441413] iommu: Adding device tegradc.0 to group 13 [ 0.441477] platform tegradc.0: domain=ffffffc0f94bef18 allocates as[0]=ffffffc0f9bd4248 [ 0.442016] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.442359] iommu: Adding device tegradc.1 to group 14 [ 0.442428] platform tegradc.1: domain=ffffffc0f94c8198 allocates as[0]=ffffffc0f9bd42b0 [ 0.442955] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.443221] iommu: Adding device 54340000.vic to group 15 [ 0.443461] iommu: Adding device 544c0000.nvenc to group 16 [ 0.443675] iommu: Adding device 54500000.tsec to group 17 [ 0.443881] iommu: Adding device 54100000.tsecb to group 18 [ 0.444089] iommu: Adding device 54480000.nvdec to group 19 [ 0.444303] iommu: Adding device 54380000.nvjpg to group 20 [ 0.445397] iommu: Adding device 546c0000.i2c to group 21 [ 0.445770] iommu: Adding device 57000000.gpu to group 22 [ 0.445841] platform 57000000.gpu: domain=ffffffc0f94d5198 allocates as[0]=ffffffc0f9bd4318 [ 0.445901] platform 57000000.gpu: domain=ffffffc0f94d5198 allocates as[1]=ffffffc0f9bd4380 [ 0.445981] platform 57000000.gpu: domain=ffffffc0f94d5198 allocates as[2]=ffffffc0f9bd43e8 [ 0.446040] platform 57000000.gpu: domain=ffffffc0f94d5198 allocates as[3]=ffffffc0f9bd4450 [ 0.446909] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.446949] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.446976] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.446997] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.447015] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.497216] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497249] tegra-pmc: Clear bootloader IO dpd settings [ 0.497281] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497365] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497682] iommu: Adding device 70012000.se to group 23 [ 0.498489] iommu: Adding device 7000c000.i2c to group 24 [ 0.498761] iommu: Adding device 7000c400.i2c to group 25 [ 0.499016] iommu: Adding device 7000c500.i2c to group 26 [ 0.499278] iommu: Adding device 7000c700.i2c to group 27 [ 0.499537] iommu: Adding device 7000d000.i2c to group 28 [ 0.499804] iommu: Adding device 7000d100.i2c to group 29 [ 0.500082] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.500159] platform sdhci-tegra.3: domain=ffffffc0f9588318 allocates as[0]=ffffffc0f9bd44b8 [ 0.501009] iommu: Adding device 700d0000.xudc to group 31 [ 0.504416] vdd-ac-bat: 5000 mV [ 0.504794] vdd-5v0-sys: 5000 mV [ 0.505793] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.505858] vdd-5v0-hdmi: 5000 mV [ 0.506279] vdd-1v8-sys: 1800 mV [ 0.506672] vdd-fan: supplied by vdd-5v0-sys [ 0.506743] vdd-fan: 5000 mV [ 0.507167] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.507212] vdd-usb-vbus: 5000 mV [ 0.507748] vdd-usb-vbus2: 5000 mV [ 0.538148] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540653] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.542140] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.542182] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.542233] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.542610] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.550667] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.551035] SCSI subsystem initialized [ 0.551278] libata version 3.00 loaded. [ 0.551614] usbcore: registered new interface driver usbfs [ 0.551687] usbcore: registered new interface driver hub [ 0.551772] usbcore: registered new device driver usb [ 0.555376] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.561054] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.561805] random: fast init done [ 0.561968] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564973] vdd-ddr-1v1: 1150 mV [ 0.568963] vdd-pre-reg-1v35: 1350 mV [ 0.572967] vdd-1v8: 1800 mV [ 0.576962] avdd-sys-1v2: 1200 mV [ 0.580962] vdd-pex-1v0: 1050 mV [ 0.581532] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.582023] max77620-ldo3: at 3100 mV [ 0.584966] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.585495] max77620-ldo5: at 3100 mV [ 0.588965] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592964] avdd-1v05-pll: 1050 mV [ 0.596962] avdd-io-hdmi-dp: 1050 mV [ 0.598127] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.598406] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.599736] max77620 4-003c: max77620 probe successful [ 0.602368] media: Linux media interface: v0.10 [ 0.602445] Linux video capture interface: v2.00 [ 0.603367] pps_core: LinuxPPS API ver. 1 registered [ 0.603395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603433] PTP clock support registered [ 0.606995] tegra_fiq_debugger_init: found FIQ source (IRQ 97) [ 0.613377] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.614267] Advanced Linux Sound Architecture Driver Initialized. [ 0.614917] Bluetooth: Core ver 2.22 [ 0.614985] NET: Registered protocol family 31 [ 0.615005] Bluetooth: HCI device and connection manager initialized [ 0.615033] Bluetooth: HCI socket layer initialized [ 0.615055] Bluetooth: L2CAP socket layer initialized [ 0.615096] Bluetooth: SCO socket layer initialized [ 0.617005] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.617046] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.617107] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.617135] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.620346] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.621385] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.621471] vdd-3v3-sys: 3300 mV [ 0.621758] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.624398] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.624877] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.624957] vdd-3v3-sd: 3300 mV [ 0.625829] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.625889] avdd-io-edp-1v05: 1050 mV [ 0.626309] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.626361] vdd-usb-hub-en: 5000 mV [ 0.627773] camchar: rtcpu character device driver loaded [ 0.628559] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.629887] clocksource: Switched to clocksource arch_sys_counter [ 0.670038] VFS: Disk quotas dquot_6.6.0 [ 0.670208] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.670739] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.671187] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.671235] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.671470] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.671496] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.671524] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.671570] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.671598] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.671630] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.671653] nvmap_page_pool_init: Total RAM pages: 1011375 [ 0.671671] nvmap_page_pool_init: nvmap page pool size: 126421 pages (493 MB) [ 0.671950] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.672241] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.673185] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.681394] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.681843] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.682152] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.682388] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.682590] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.682845] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.682865] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB [ 0.683312] NET: Registered protocol family 2 [ 0.684292] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.684531] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.685044] TCP: Hash tables configured (established 32768 bind 32768) [ 0.685207] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.685306] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.685745] NET: Registered protocol family 1 [ 0.686601] RPC: Registered named UNIX socket transport module. [ 0.686629] RPC: Registered udp transport module. [ 0.686646] RPC: Registered tcp transport module. [ 0.686662] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.686690] PCI: CLS 0 bytes, default 64 [ 0.686911] Trying to unpack rootfs image as initramfs... [ 0.934608] Freeing initrd memory: 5428K [ 0.944243] host1x 50000000.host1x: initialized [ 0.946121] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.949397] audit: initializing netlink subsys (disabled) [ 0.949513] audit: type=2000 audit(0.799:1): initialized [ 0.950360] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.960374] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.961965] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.962789] 9p: Installing v9fs 9p2000 file system support [ 0.966046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.966217] io scheduler noop registered [ 0.966525] io scheduler cfq registered (default) [ 0.969180] gic 702f9000.agic: GIC IRQ controller registered [ 0.972432] iommu: Adding device 702ef000.adsp to group 32 [ 0.979278] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 0.979472] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.980080] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x89e840d [ 0.980111] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.981718] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.981851] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.982009] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.982214] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.982331] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.982439] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.982545] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.982650] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.982778] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.982883] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.988238] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.990124] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.992042] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.993344] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.993716] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.994967] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.995212] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.995474] Adding domain tsec-pd to PM domain host1x-pd [ 0.997683] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.998675] tsec 54500000.tsec: initialized [ 1.000189] tsec 54100000.tsecb: initialized [ 1.000937] Adding domain nvdec-pd to PM domain host1x-pd [ 1.004399] nvdec 54480000.nvdec: initialized [ 1.005466] Adding domain vic03-pd to PM domain host1x-pd [ 1.005669] Adding domain msenc-pd to PM domain host1x-pd [ 1.005845] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.009989] falcon 54340000.vic: initialized [ 1.011297] falcon 544c0000.nvenc: initialized [ 1.012595] falcon 54380000.nvjpg: initialized [ 1.017243] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.017394] display board info: id 0x0, fab 0x0 [ 1.017472] generic_infoframe_type: 0x87 [ 1.017619] tegradc tegradc.0: DT parsed successfully [ 1.017680] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 1.021192] tegradc tegradc.0: probed [ 1.025036] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.029508] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels [ 1.030348] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.030750] kfuse 7000fc00.kfuse: initialized [ 1.032217] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.033193] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.034664] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.034708] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.035237] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.036559] vdd-gpu: applied init 1000000uV constraint [ 1.036598] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.037000] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.041557] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.041691] No Device Node present for smmu client: serial8250 !! [ 1.041720] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.041803] iommu: Adding device serial8250 to group 34 [ 1.044114] console [ttyS0] disabled [ 1.044207] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.516478] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.920823] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.325153] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.327171] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.433322] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.433332] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.433338] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.433344] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.433349] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.433391] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.433498] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.433737] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.433924] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.433951] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.433985] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.434008] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.434153] pci 0000:01:00.0: supports D1 D2 [ 2.434157] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.445936] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.445985] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.445990] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.446001] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.446022] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.446040] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.446051] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.446057] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.446065] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.446420] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.446424] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.446431] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.446555] aer 0000:00:02.0:pcie002: service driver aer loaded [ 3.415951] console [ttyS0] enabled [ 3.416323] Console: switching to colour frame buffer device 80x30 [ 3.417398] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 3.417758] serial-tegra 70006200.serial: RX in PIO mode [ 3.417856] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 3.418922] [drm] Initialized [ 3.446889] brd: module loaded [ 3.455466] tegradc tegradc.0: fb registered [ 3.458796] loop: module loaded [ 3.458892] tegra_profiler: version: 1.134, samples/io: 47/26 [ 3.459022] tegra_profiler: auth: init [ 3.461034] THERMAL EST: found 2 subdevs [ 3.461040] THERMAL EST num_resources: 0 [ 3.461044] [THERMAL EST subdev 0] [ 3.461051] [THERMAL EST subdev 1] [ 3.461497] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.461499] THERMAL EST: thz register success. [ 3.461656] THERMAL EST: end of probe, return err: 0 [ 3.462957] hisi_sas: driver version v1.6 [ 3.470508] libphy: Fixed MDIO Bus: probed [ 3.471103] tun: Universal TUN/TAP device driver, 1.6 [ 3.471106] tun: (C) 1999-2004 Max Krasnyansky [ 3.472136] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.472139] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.472204] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.472206] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.472256] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.472259] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.472305] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.472309] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.473166] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 3.473192] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 3.494508] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 3.494685] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e5:db:70 from device tree [ 3.495286] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.495342] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 3.495930] PPP generic driver version 2.4.2 [ 3.496136] PPP BSD Compression module registered [ 3.496141] PPP Deflate Compression module registered [ 3.496179] PPP MPPE Compression module registered [ 3.496186] NET: Registered protocol family 24 [ 3.496256] usbcore: registered new interface driver r8152 [ 3.496306] usbcore: registered new interface driver asix [ 3.496366] usbcore: registered new interface driver ax88179_178a [ 3.496405] usbcore: registered new interface driver cdc_ether [ 3.496446] usbcore: registered new interface driver net1080 [ 3.496484] usbcore: registered new interface driver cdc_subset [ 3.496522] usbcore: registered new interface driver zaurus [ 3.496582] usbcore: registered new interface driver cdc_ncm [ 3.496761] VFIO - User Level meta-driver version: 0.3 [ 3.498063] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.498085] ehci-pci: EHCI PCI platform driver [ 3.498129] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.498141] ohci-pci: OHCI PCI platform driver [ 3.498183] ohci-platform: OHCI generic platform driver [ 3.500798] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 3.501396] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 3.502598] tegra-xusb 70090000.xusb: extcon 0: ffffffc0fa5d2c00 id [ 3.504769] usbcore: registered new interface driver uas [ 3.504915] usbcore: registered new interface driver usb-storage [ 3.505025] usbcore: registered new interface driver usbserial [ 3.505444] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-05-08 09:42:10 UTC, Version: 50.22 release [ 3.505487] tegra-xusb 70090000.xusb: xHCI Host Controller [ 3.505514] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 3.506442] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 3.506506] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 3.506709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.506714] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.506719] usb usb1: Product: xHCI Host Controller [ 3.506722] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.506726] usb usb1: SerialNumber: 70090000.xusb [ 3.507334] hub 1-0:1.0: USB hub found [ 3.507375] hub 1-0:1.0: 5 ports detected [ 3.507946] tegra-xusb 70090000.xusb: xHCI Host Controller [ 3.507955] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 3.508036] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.508134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.508138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.508142] usb usb2: Product: xHCI Host Controller [ 3.508146] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.508150] usb usb2: SerialNumber: 70090000.xusb [ 3.508562] hub 2-0:1.0: USB hub found [ 3.508593] hub 2-0:1.0: 4 ports detected [ 3.511896] tegra-xudc-new 700d0000.xudc: device count: 1 [ 3.513166] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 3.513180] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 3.513211] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.513450] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.514122] mousedev: PS/2 mouse device common for all mice [ 3.514229] usbcore: registered new interface driver xpad [ 3.609981] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 3.749831] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.762829] rtc rtc1: alarm rtc device [ 3.762846] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 3.762874] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.763426] i2c /dev entries driver [ 3.765421] i2c i2c-6: Added multiplexed i2c bus 7 [ 3.765861] i2c i2c-6: Added multiplexed i2c bus 8 [ 3.765867] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 3.766849] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 3.791191] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 3.791282] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 3.791314] imx219 7-0010: board setup failed [ 3.791410] imx219: probe of 7-0010 failed with error -121 [ 3.791912] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 3.822627] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 3.822711] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 3.822739] imx219 8-0010: board setup failed [ 3.822798] imx219: probe of 8-0010 failed with error -121 [ 3.828601] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.845925] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 3.866871] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 3.866876] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 3.867325] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.867341] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 3.867350] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 3.867512] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.867521] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 3.867527] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 3.867670] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.867679] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 3.867684] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 3.867857] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 3.868672] tegra_aotag tegra-aotag: Registering sensor 0 [ 3.868726] tegra_aotag tegra-aotag: Invalid temp readout [ 3.868750] tegra_aotag tegra-aotag: Invalid temp readout [ 3.868766] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 3.868773] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 3.869680] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.869701] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 3.869914] tegra_aotag tegra-aotag: Invalid temp readout [ 3.869947] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 3.870351] parse_throttle_dt_data: Num cap clks = 6 [ 3.870357] parse_throttle_dt_data: clk=cclk_g type=2 [ 3.870371] parse_throttle_dt_data: clk=gpu type=4 [ 3.870398] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 3.870419] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 3.870442] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 3.870445] parse_throttle_dt_data: clk=emc type=3 [ 3.871804] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.871903] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.872040] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.872808] FAN dev name: pwm-fan [ 3.872861] FAN:gpio request success. [ 3.872931] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.873229] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 3.873413] pwm_fan_driver pwm-fan: fan tach request irq success [ 3.873422] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.873517] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.873521] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.873525] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.873529] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.873533] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.873537] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.873541] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.873545] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.873549] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.873553] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.874223] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 3.874567] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 3.875464] device-mapper: uevent: version 1.0.3 [ 3.875937] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.881228] tegra210-cpufreq cpufreq: probe()...completed [ 3.881927] sdhci: Secure Digital Host Controller Interface driver [ 3.881929] sdhci: Copyright(c) Pierre Ossman [ 3.881930] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.882277] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 3.885242] tegra-se 70012000.se: tegra_se_probe: complete [ 3.885770] hidraw: raw HID events driver (C) Jiri Kosina [ 3.886891] usbcore: registered new interface driver usbhid [ 3.886892] usbhid: USB HID core driver [ 3.913831] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 3.914100] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 3.915750] nvpmodel: initialized successfully [ 3.916976] usbcore: registered new interface driver snd-usb-audio [ 3.917034] No Device Node present for smmu client: snd-soc-dummy !! [ 3.917039] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.917055] iommu: Adding device snd-soc-dummy to group 35 [ 3.925954] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 3.925958] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.925961] usb 1-2: Product: 4-Port USB 2.1 Hub [ 3.925964] usb 1-2: Manufacturer: Generic [ 3.937726] hub 1-2:1.0: USB hub found [ 3.942961] hub 1-2:1.0: 4 ports detected [ 3.945403] OPE platform probe [ 3.945494] OPE platform probe successful [ 3.945893] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 3.947034] OPE platform probe [ 3.947120] OPE platform probe successful [ 3.977141] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.977266] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.977395] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.977517] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.977641] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.977761] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.977901] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.978025] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.978150] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.978277] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.990020] u32 classifier [ 3.990022] Actions configured [ 3.990094] Initializing XFRM netlink socket [ 3.990834] NET: Registered protocol family 10 [ 3.991575] NET: Registered protocol family 17 [ 3.991586] NET: Registered protocol family 15 [ 3.991659] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.991707] Bluetooth: RFCOMM socket layer initialized [ 3.991715] Bluetooth: RFCOMM ver 1.11 [ 3.991720] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.991724] Bluetooth: HIDP socket layer initialized [ 3.991742] 9pnet: Installing 9P2000 support [ 3.991777] Key type dns_resolver registered [ 3.996615] Registered cp15_barrier emulation handler [ 3.996643] Registered setend emulation handler [ 3.997721] registered taskstats version 1 [ 3.998321] Adding domain ve2-pd to PM domain host1x-pd [ 3.998560] Adding domain ve-pd to PM domain host1x-pd [ 4.060044] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 4.159025] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.163509] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 4.167808] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 4.192274] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 4.365942] usb 1-2.3: new high-speed USB device number 3 using tegra-xusb [ 4.484545] usb 1-2.3: New USB device found, idVendor=0951, idProduct=1666 [ 4.484549] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.484552] usb 1-2.3: Product: DataTraveler 3.0 [ 4.484554] usb 1-2.3: Manufacturer: Kingston [ 4.484556] usb 1-2.3: SerialNumber: 408D5C15CFA5E310592F782B [ 4.495681] usb-storage 1-2.3:1.0: USB Mass Storage device detected [ 4.496097] scsi host0: usb-storage 1-2.3:1.0 [ 4.605942] usb 1-2.4: new low-speed USB device number 4 using tegra-xusb [ 4.611450] usb 1-2.4: Device not responding to setup address. [ 4.819410] usb 1-2.4: Device not responding to setup address. [ 4.842896] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 4.849301] tegradc tegradc.1: No lt-data, using default setting [ 4.855327] tegradc tegradc.1: No hpd-gpio in DT [ 4.859961] tegradc tegradc.1: DT parsed successfully [ 4.865030] tegradc tegradc.1: Display dc.ffffff800d4c0000 registered with id=1 [ 4.873089] tegradc tegradc.1: dpd enable lookup fail:-19 [ 5.384050] Host read timeout at address 545c00c4 [ 5.384110] usb 1-2.4: device not accepting address 4, error -71 [ 5.385297] tegradc tegradc.1: probed [ 5.398606] tegradc tegradc.1: fb registered [ 5.406010] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 5.413146] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 5.414370] isp 54600000.isp: initialized [ 5.415159] isp 54680000.isp: initialized [ 5.425691] last reset is due to power on reset [ 5.425694] KERNEL: PMC reset status reg: 0x0 [ 5.425765] BL: PMC reset status reg: 0x0 [ 5.425767] BL: PMIC poweroff Event Recorder: 0x50 [ 5.427206] clk_cbus_recalc_rate: no gbus parent [ 5.427210] clk_cbus_round_rate: no gbus parent [ 5.427212] clk_cbus_round_rate: no gbus parent [ 5.427220] clk_cbus_recalc_rate: no gbus parent [ 5.427319] clk_cbus_recalc_rate: no gbus parent [ 5.427321] clk_cbus_round_rate: no gbus parent [ 5.427323] clk_cbus_round_rate: no gbus parent [ 5.427326] clk_cbus_recalc_rate: no gbus parent [ 5.427339] tegra_dvfs: GPU-cap: registered [ 5.427397] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 5.427399] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 5.427401] tegra dvfs: vdd-gpu: nominal 1048mV, offset 708000uV, step 10000uV, scaling enabled [ 5.428854] tegra_dvfs: vdd-gpu-vts: registered [ 5.429548] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 5.430184] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 5.430675] input: gpio-keys as /devices/gpio-keys/input/input1 [ 5.465110] tegra_rtc 7000e000.rtc: setting system clock to 2019-11-25 06:11:32 UTC (1574662292) [ 5.466151] vi 54080000.vi: vi_probe: ++ [ 5.468710] vi 54080000.vi: initialized [ 5.470717] vi 54080000.vi: subdev nvcsi--2 bound [ 5.470815] vi 54080000.vi: subdev nvcsi--1 bound [ 5.471024] mmcblk mmc0:0001: Card claimed for testing. [ 5.472273] Disable partitions left on by BL [ 5.472276] disb [ 5.472319] bwmgr: missing cdev-type property [ 5.472410] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 5.472415] DRAM derating cdev registered. [ 5.473407] vdd-fan: disabling [ 5.473409] vdd-usb-vbus: disabling [ 5.473411] vdd-usb-vbus2: disabling [ 5.473419] vddio-sdmmc-ap: disabling [ 5.473502] vddio-sdmmc3-ap: disabling [ 5.473567] vdd-3v3-sd: disabling [ 5.473570] avdd-io-edp-1v05: disabling [ 5.473572] vdd-usb-hub-en: disabling [ 5.473651] ALSA device list: [ 5.473653] #0: tegra-hda at 0x70038000 irq 82 [ 5.473655] #1: tegra-snd-t210ref-mobile-rt565x [ 5.481945] usb 1-2.4: new low-speed USB device number 5 using tegra-xusb [ 5.482779] usb 1-2.4: Device not responding to setup address. [ 5.523044] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ 5.523960] sd 0:0:0:0: [sda] 242417664 512-byte logical blocks: (124 GB/116 GiB) [ 5.524411] sd 0:0:0:0: [sda] Write Protect is off [ 5.524416] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 5.524823] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.620502] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.685570] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 5.690692] usb 1-2.4: Device not responding to setup address. [ 5.697018] tegradc tegradc.1: blank - powerdown [ 5.701653] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 5.701655] Extcon DP: HPD disabled [ 5.701657] hpd: hpd_switch 0 [ 5.701659] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 5.701666] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 5.701670] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 5.737865] Freeing unused kernel memory: 8576K [ 5.760829] L4T-INITRD Build DATE: Mon Nov 25 06:11:32 UTC 2019 [ 5.771138] Root device found: mmcblk0p1 [ 5.776170] Found dev node: /dev/mmcblk0p1 [ 5.897938] usb 1-2.4: device not accepting address 5, error -71 [ 5.904118] usb 1-2-port4: attempt power cycle [ 5.905706] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 5.905708] EXT4-fs (mmcblk0p1): recovery complete [ 5.916273] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.917061] Rootfs mounted over mmcblk0p1 [ 5.931325] Switching from initrd to actual rootfs [ 6.025234] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.042037] cgroup: cgroup2: unknown option "nsdelegate" [ 6.056446] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.078571] systemd[1]: Detected architecture arm64. [ 6.108224] systemd[1]: Set hostname to . [ 6.173966] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.191297] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.297611] random: systemd: uninitialized urandom read (16 bytes read) [ 6.304282] systemd[1]: Reached target User and Group Name Lookups. [ 6.311063] random: systemd: uninitialized urandom read (16 bytes read) [ 6.319587] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.329208] random: systemd: uninitialized urandom read (16 bytes read) [ 6.337717] systemd[1]: Created slice System Slice. [ 6.343010] systemd[1]: Listening on Journal Socket. [ 6.350402] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.395728] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 6.470688] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 6.541919] usb 1-2.4: new low-speed USB device number 6 using tegra-xusb [ 6.622096] usb 1-2.4: device descriptor read/64, error -32 [ 6.719593] systemd-journald[1971]: Received request to flush runtime journal from PID 1 [ 6.814090] usb 1-2.4: device descriptor read/64, error -32 [ 7.005911] usb 1-2.4: new low-speed USB device number 7 using tegra-xusb [ 7.086081] usb 1-2.4: device descriptor read/64, error -32 [ 7.278129] usb 1-2.4: device descriptor read/64, error -32 [ 7.390058] usb 1-2-port4: unable to enumerate USB device [ 7.554911] using random self ethernet address [ 7.561688] using random host ethernet address [ 7.604841] Mass Storage Function, version: 2009/09/11 [ 7.604847] LUN: removable file: (no medium) [ 7.619905] using random self ethernet address [ 7.633961] using random host ethernet address [ 7.678075] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 7.678082] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 7.714011] rndis0: HOST MAC 92:d0:19:7d:b5:d0 [ 7.714407] rndis0: MAC 92:d0:19:7d:b5:d1 [ 7.717787] usb0: HOST MAC 92:d0:19:7d:b5:d2 [ 7.718726] usb0: MAC 92:d0:19:7d:b5:d3 [ 7.718751] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 7.723290] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 7.723308] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.723379] tegra-xudc-new 700d0000.xudc: entering ELPG [ 7.723632] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 7.723648] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 7.725534] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 7.725559] tegra-xudc-new 700d0000.xudc: entering ELPG [ 7.725806] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 7.737321] l4tbr0: port 1(rndis0) entered blocking state [ 7.737327] l4tbr0: port 1(rndis0) entered disabled state [ 7.744868] device rndis0 entered promiscuous mode [ 7.771788] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.787691] l4tbr0: port 2(usb0) entered blocking state [ 7.787697] l4tbr0: port 2(usb0) entered disabled state [ 7.788332] device usb0 entered promiscuous mode [ 7.814269] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.879103] random: crng init done [ 7.882509] random: 7 urandom warning(s) missed due to ratelimiting [ 8.010518] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 8.045925] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 8.045932] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.045937] usb 2-1: Product: 4-Port USB 3.1 Hub [ 8.045940] usb 2-1: Manufacturer: Generic [ 8.049709] hub 2-1:1.0: USB hub found [ 8.050526] hub 2-1:1.0: 4 ports detected [ 8.202746] zram: Added device: zram0 [ 8.204693] zram: Added device: zram1 [ 8.205770] zram: Added device: zram2 [ 8.213939] usb 2-1: usb_suspend_both: status 0 [ 8.214133] usb usb2: usb_suspend_both: status 0 [ 8.221853] zram: Added device: zram3 [ 8.294041] zram0: detected capacity change from 0 to 519618560 [ 8.328348] Adding 507436k swap on /dev/zram0. Priority:5 extents:1 across:507436k SS [ 8.336488] zram1: detected capacity change from 0 to 519618560 [ 8.373239] Adding 507436k swap on /dev/zram1. Priority:5 extents:1 across:507436k SS [ 8.379394] zram2: detected capacity change from 0 to 519618560 [ 8.391419] Adding 507436k swap on /dev/zram2. Priority:5 extents:1 across:507436k SS [ 8.395379] zram3: detected capacity change from 0 to 519618560 [ 8.410805] Adding 507436k swap on /dev/zram3. Priority:5 extents:1 across:507436k SS [ 8.628197] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.631689] eth0: 0xffffff800a37c000, 00:04:4b:e5:db:70, IRQ 403 [ 8.752791] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.277201] tegradc tegradc.0: blank - powerdown [ 9.277212] tegradc tegradc.1: blank - powerdown [ 9.847684] fuse init (API version 7.26) [ 108.914100] edid invalid [ 109.053033] tegradc tegradc.0: blank - powerdown [ 109.058248] tegradc tegradc.0: unblank [ 109.099856] tegradc tegradc.0: nominal-pclk:241500000 parent:241500000 div:1.0 pclk:241500000 239085000~263235000 [ 109.099954] tegradc tegradc.0: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_150m_300m [ 109.100983] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 109.100990] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 109.144554] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 109.144582] Extcon AUX1(HDMI) enable [ 109.145851] extcon-disp-state extcon:disp-state: cable 40 state 1 [ 109.145854] Extcon HDMI: HPD enabled [ 109.146027] tegradc tegradc.0: hdmi: plugged [ 109.158693] tegradc tegradc.0: blank - powerdown [ 109.218210] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 109.218214] Extcon AUX1(HDMI) disable [ 109.238583] tegradc tegradc.1: blank - powerdown [ 109.287562] tegradc tegradc.0: blank - powerdown [ 109.287584] tegradc tegradc.0: unblank [ 109.299862] tegradc tegradc.0: nominal-pclk:241500000 parent:241500000 div:1.0 pclk:241500000 239085000~263235000 [ 109.299951] tegradc tegradc.0: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_150m_300m [ 109.300983] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 109.300990] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 109.339147] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 109.339152] Extcon AUX1(HDMI) enable [ 109.349946] tegradc tegradc.0: unblank [ 109.349956] tegradc tegradc.1: blank - powerdown [ 110.869477] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 110.869486] Extcon AUX1(HDMI) disable [ 110.889692] tegradc tegradc.0: blank - powerdown [ 110.897969] extcon-disp-state extcon:disp-state: cable 40 state 0 [ 110.897973] Extcon HDMI: HPD disabled [ 110.897997] tegradc tegradc.0: hdmi: unplugged [ 110.927627] tegradc tegradc.0: blank - powerdown [ 110.927640] tegradc tegradc.0: unblank [ 110.927666] tegradc tegradc.0: unblank [ 110.927676] tegradc tegradc.1: blank - powerdown [ 111.147337] tegradc tegradc.0: blank - powerdown [ 111.147372] tegradc tegradc.0: unblank [ 111.165396] tegradc tegradc.0: nominal-pclk:241500000 parent:241500000 div:1.0 pclk:241500000 239085000~263235000 [ 111.165489] tegradc tegradc.0: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_150m_300m [ 111.168110] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 111.168117] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 111.207994] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 111.207998] Extcon AUX1(HDMI) enable [ 111.208271] extcon-disp-state extcon:disp-state: cable 40 state 1 [ 111.208273] Extcon HDMI: HPD enabled [ 111.208323] tegradc tegradc.0: hdmi: plugged [ 111.213656] tegradc tegradc.0: blank - powerdown [ 111.270739] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 111.270743] Extcon AUX1(HDMI) disable [ 111.289016] tegradc tegradc.0: unblank [ 111.301097] tegradc tegradc.0: nominal-pclk:241500000 parent:241500000 div:1.0 pclk:241500000 239085000~263235000 [ 111.301180] tegradc tegradc.0: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_150m_300m [ 111.302224] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 111.302231] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 111.338201] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 111.338203] Extcon AUX1(HDMI) enable [ 111.338377] tegradc tegradc.0: unblank [ 111.338384] tegradc tegradc.1: blank - powerdown