[0000.062] I> MB1 (version: 0.28.0.0-t234-54845784-ec016368) [0000.067] I> t234-A01-0-Silicon (0x12347) Prod [0000.071] I> Boot-mode : Coldboot [0000.075] I> Emulation: [0000.077] I> Entry timestamp: 0x00000000 [0000.081] I> last_boot_error: 0x0 [0000.084] I> BR-BCT: preprod_dev_sign: 0 [0000.087] I> rst_source: 0x0, rst_level: 0x0 [0000.092] I> Task: Bootchain select WAR set (0x5000c741) [0000.097] I> Active chain: 0 [0000.099] I> Task: CRC check (0x5001dab5) [0000.103] I> Skip CRC check as records_integrity fuse is not burned [0000.109] I> Task: Initialize MB2 params (0x5000d78d) [0000.115] I> MB2-params @ 0x40060000 [0000.118] I> Task: Crypto init (0x5001cb8d) [0000.122] I> Task: Secure debug controls (0x5000cd21) [0000.127] I> Task: strap war set (0x5000c70d) [0000.131] I> strap value(0x4000401) set to 0x4000401 [0000.136] I> Task: Initialize SOC Therm (0x5001af85) [0000.141] I> Task: Program NV master stream id (0x5000ccd5) [0000.146] I> Task: Verify boot mode (0xd482021) [0000.152] I> Task: Alias fuses (0x500109cd) [0000.157] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.165] I> Task: Print SKU type (0x5000fee1) [0000.169] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.174] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.178] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.183] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.187] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.191] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.195] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.199] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.203] I> FUSE_SKU_INFO_0 = 0xd0 [0000.207] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.211] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.215] I> SKU: Prod [0000.217] I> Task: Boost clocks (0x5001462d) [0000.221] I> Initializing PLLC2 for AXI_CBB. [0000.225] I> AXI_CBB : src = 35, divisor = 0 [0000.229] I> Task: Voltage monitor (0x50014639) [0000.234] I> VMON: Vmon re-calibration and fine tuning done [0000.239] I> Task: UPHY init (0x5000dced) [0000.243] W> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.249] I> Task: Boot device init (0x50000b39) [0000.253] I> Boot_device: QSPI_FLASH instance: 0 [0000.258] I> Qspi clock source : pllc_out0 [0000.262] I> QSPI Flash: Macronix 64MB [0000.265] I> QSPI-0l initialized successfully [0000.270] I> Task: TSC init (0x5001fa6d) [0000.274] I> Task: Load membct (0x50011fb9) [0000.278] I> RAM_CODE 0x4000401 [0000.281] I> Loading MEMBCT [0000.283] I> Active chain: 0 [0000.286] I> Slot: 0 [0000.288] I> Binary[0] block-0 (partition size: 0x40000) [0000.293] I> get_binary_info: Binary name: MEM-BCT-0 [0000.298] I> Size of crypto header is 8192 [0000.302] I> BCH load address is : 0x40050000 [0000.306] I> Size of crypto header is 8192 [0000.310] I> BCH of MEM-BCT-0 read from storage [0000.315] I> BCH address is : 0x40050000 [0000.319] I> MEM-BCT-0 header integrity check is success [0000.324] I> Binary magic in BCH component 0 is MEM0 [0000.329] I> component binary type is 0 [0000.333] I> MEM-BCT-0 binary is read from storage [0000.338] I> MEM-BCT-0 binary integrity check is success [0000.343] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.350] I> RAM_CODE 0x4000401 [0000.355] I> RAM_CODE 0x4000401 [0000.359] I> Task: Load Page retirement list (0x50011601) [0000.364] I> Task: SDRAM params override (0x50011f95) [0000.369] I> Task: Save mem-bct info (0x500147fd) [0000.373] I> Task: Carveout allocate (0x50014861) [0000.378] I> RCM blob carveout will not be allocated [0000.383] I> ECC region[0]: Start:0x0, End:0x0 [0000.387] I> ECC region[1]: Start:0x0, End:0x0 [0000.391] I> ECC region[2]: Start:0x0, End:0x0 [0000.396] I> ECC region[3]: Start:0x0, End:0x0 [0000.400] I> ECC region[4]: Start:0x0, End:0x0 [0000.404] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.410] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.415] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.419] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.424] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.434] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.441] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.448] I> allocated(CO:43) base:0x83c000000 size:0x4000000 align: 0x200000 [0000.455] I> allocated(CO:20) base:0x83a000000 size:0x2000000 align: 0x2000000 [0000.462] I> allocated(CO:24) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.469] I> allocated(CO:28) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.476] I> allocated(CO:29) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.483] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.490] I> allocated(CO:41) base:0x833000000 size:0x1000000 align: 0x100000 [0000.497] I> allocated(CO:35) base:0x832200000 size:0xe00000 align: 0x10000 [0000.504] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.511] I> allocated(CO:03) base:0x831800000 size:0x800000 align: 0x800000 [0000.518] I> allocated(CO:06) base:0x831000000 size:0x800000 align: 0x800000 [0000.525] I> allocated(CO:10) base:0x830800000 size:0x800000 align: 0x800000 [0000.532] I> allocated(CO:56) base:0x830000000 size:0x800000 align: 0x200000 [0000.539] I> allocated(CO:07) base:0x82fc00000 size:0x400000 align: 0x400000 [0000.546] I> allocated(CO:33) base:0x82f800000 size:0x400000 align: 0x200000 [0000.553] I> allocated(CO:01) base:0x832100000 size:0x100000 align: 0x100000 [0000.560] I> allocated(CO:04) base:0x832000000 size:0x100000 align: 0x100000 [0000.567] I> allocated(CO:05) base:0x82f700000 size:0x100000 align: 0x100000 [0000.573] I> allocated(CO:08) base:0x82f600000 size:0x100000 align: 0x100000 [0000.580] I> allocated(CO:09) base:0x82f500000 size:0x100000 align: 0x100000 [0000.587] I> allocated(CO:15) base:0x82f400000 size:0x100000 align: 0x100000 [0000.594] I> allocated(CO:17) base:0x82f300000 size:0x100000 align: 0x100000 [0000.601] I> allocated(CO:23) base:0x82f200000 size:0x100000 align: 0x100000 [0000.608] I> allocated(CO:27) base:0x82f100000 size:0x100000 align: 0x100000 [0000.615] I> allocated(CO:42) base:0x82f000000 size:0x100000 align: 0x100000 [0000.622] I> allocated(CO:54) base:0x82ef80000 size:0x80000 align: 0x80000 [0000.629] I> allocated(CO:34) base:0x82ef70000 size:0x10000 align: 0x10000 [0000.635] I> allocated(CO:47) base:0x82ea00000 size:0x400000 align: 0x200000 [0000.642] I> allocated(CO:72) base:0x82e800000 size:0x200000 align: 0x10000 [0000.649] I> allocated(CO:48) base:0x82ef50000 size:0x20000 align: 0x10000 [0000.656] I> allocated(CO:69) base:0x82ef30000 size:0x20000 align: 0x10000 [0000.663] I> allocated(CO:49) base:0x82ef20000 size:0x10000 align: 0x10000 [0000.669] I> allocated(CO:50) base:0x82ef10000 size:0x10000 align: 0x10000 [0000.676] I> allocated(CO:52) base:0x82ef00000 size:0x10000 align: 0x10000 [0000.683] I> NSDRAM base: 0x80000000, end: 0x82ef70000 [0000.688] I> Task: Thermal check (0x500208f9) [0000.692] I> max_chip_limit = 105 [0000.695] I> min_chip_limit = -28 [0000.698] I> max temp read = 32 [0000.701] I> min temp read = 31 [0000.704] I> Task: Update FSI SCR with thermal fuse data (0x50020a05) [0000.711] I> Task: Enable WDT 5th expiry (0x50020699) [0000.716] I> Task: I2C register (0x50000ad9) [0000.720] I> Task: Reset FSI (0x50014635) [0000.724] I> Task: Pinmux init (0x500137bd) [0000.728] I> Task: Prod config init (0x50013c09) [0000.732] I> Task: Pad voltage init (0x50013859) [0000.737] I> Task: Prod init (0x50013c4d) [0000.741] I> Task: Common rail init (0x50014305) [0000.746] W> PMIC_CONFIG: Rail: Thermal config not found in MB1 BCT. [0000.752] I> DONE: Thermal config [0000.756] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.764] I> DONE: SOC rail config [0000.768] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT. [0000.775] I> DONE: MEMIO rail config [0000.778] I> DONE: GPU rail info [0000.781] I> DONE: CV rail info [0000.784] I> Task: Mem clock src (0x50011de5) [0000.789] I> Task: Misc. board config (0x500143ad) [0000.794] W> PMIC_CONFIG: Platform config not found in MB1 BCT. [0000.800] I> Task: SDRAM init (0x50011de9) [0000.806] I> SDRAM-params @ 0xd485000 [0000.810] I> MSS code-drop: NvBootSdramInit [0000.814] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 9 [0000.821] I> MSS CAR: Init PLLM [0000.824] I> MSS CAR: Init PLLHUB [0000.829] I> Encryption: MTS: en, TX: en, VPR: en, GSC: en [0000.841] I> mb1_sdram_init Done ! [0000.844] I> SDRAM Size in Total 0x800000000 [0000.848] I> Task: Dram Ecc scrub (0x50011729) [0000.852] I> Task: DRAM alias check (0x50011f8d) [0000.884] I> Task: Program NSDRAM carveout (0x50015171) [0000.890] I> NSDRAM carveout encryption is enabled [0000.895] I> Program NSDRAM carveout [0000.899] I> Task: Register checker (0x50011f91) [0000.908] I> Task: Enable clock-mon (0x5001fa5d) [0000.925] I> FMON: Fmon re-programming done [0000.929] I> Task: Mapper init (0x5001dfed) [0000.934] I> Task: SC7 Context Init (0x5001fd5d) [0000.941] I> Task: CCPLEX IST init (0x5000d561) [0000.947] I> Task: CPU WP0 (0x5000c7a9) [0000.952] I> Loading MCE [0000.955] I> Active chain: 0 [0000.958] I> Slot: 0 [0000.960] I> Binary[8] block-0 (partition size: 0x80000) [0000.966] I> get_binary_info: Binary name: MCE [0000.971] I> Size of crypto header is 8192 [0000.975] I> BCH load address is : 0x4003e000 [0000.981] I> Size of crypto header is 8192 [0000.986] I> BCH of MCE read from storage [0000.990] I> BCH address is : 0x4003e000 [0000.995] I> MCE header integrity check is success [0001.000] I> Binary magic in BCH component 0 is MTSM [0001.006] I> component binary type is 8 [0001.010] I> Size of crypto header is 8192 [0001.016] I> MCE binary is read from storage [0001.022] I> MCE binary integrity check is success [0001.027] I> Binary MCE loaded successfully at 0x40000000 (0x2c880) [0001.034] I> Size of crypto header is 8192 [0001.050] I> Size of crypto header is 8192 [0001.055] I> Sending WP0 mailbox command to PSC [0001.065] I> Task: XUSB Powergate (0x50000ae5) [0001.071] I> Skipping powergate XUSB. [0001.074] I> Task: MB1 fixed firewalls (0x5001f0d9) [0001.095] I> Task: Load bpmp-fw (0x5001f41d) [0001.101] I> Active chain: 0 [0001.104] I> Slot: 0 [0001.107] I> Binary[15] block-0 (partition size: 0x180000) [0001.113] I> get_binary_info: Binary name: BPMP_FW [0001.118] I> Size of crypto header is 8192 [0001.122] I> BCH load address is : 0x807fe000 [0001.128] I> Size of crypto header is 8192 [0001.133] I> BCH of BPMP_FW read from storage [0001.137] I> BCH address is : 0x807fe000 [0001.143] I> BPMP_FW header integrity check is success [0001.148] I> Binary magic in BCH component 0 is BPMF [0001.154] I> component binary type is 15 [0001.158] I> Size of crypto header is 8192 [0001.173] I> BPMP_FW binary is read from storage [0001.181] I> BPMP_FW binary integrity check is success [0001.186] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfdc40) [0001.194] I> Active chain: 0 [0001.197] I> Slot: 0 [0001.200] I> Binary[16] block-10000 (partition size: 0x400000) [0001.207] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.212] I> Size of crypto header is 8192 [0001.217] I> BCH load address is : 0x807fc000 [0001.222] I> Size of crypto header is 8192 [0001.227] I> BCH of BPMP_FW_DTB read from storage [0001.232] I> BCH address is : 0x807fc000 [0001.238] I> BPMP_FW_DTB header integrity check is success [0001.243] I> Binary magic in BCH component 0 is BPMD [0001.249] I> component binary type is 16 [0001.253] I> Size of crypto header is 8192 [0001.259] I> BPMP_FW_DTB binary is read from storage [0001.265] I> BPMP_FW_DTB binary integrity check is success [0001.271] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20480) [0001.280] I> Task: Load psc-fw (0x5001f5a5) [0001.285] I> Active chain: 0 [0001.289] I> Slot: 0 [0001.291] I> Binary[17] block-0 (partition size: 0xc0000) [0001.297] I> get_binary_info: Binary name: PSC_FW [0001.302] I> Size of crypto header is 8192 [0001.307] I> BCH load address is : 0x80ffe000 [0001.312] I> Size of crypto header is 8192 [0001.317] I> BCH of PSC_FW read from storage [0001.322] I> BCH address is : 0x80ffe000 [0001.327] I> PSC_FW header integrity check is success [0001.333] I> Binary magic in BCH component 0 is PFWP [0001.338] I> component binary type is 17 [0001.342] I> Size of crypto header is 8192 [0001.351] I> PSC_FW binary is read from storage [0001.357] I> PSC_FW binary integrity check is success [0001.362] I> Binary PSC_FW loaded successfully at 0x80000000 (0x59980) [0001.370] I> Task: Load nvdec-fw (0x5001f619) [0001.376] I> Active chain: 0 [0001.379] I> Slot: 0 [0001.382] I> Binary[7] block-0 (partition size: 0x100000) [0001.388] I> get_binary_info: Binary name: NVDEC [0001.393] I> Size of crypto header is 8192 [0001.397] I> BCH load address is : 0x800fe000 [0001.403] I> Size of crypto header is 8192 [0001.408] I> BCH of NVDEC read from storage [0001.412] I> BCH address is : 0x800fe000 [0001.418] I> NVDEC header integrity check is success [0001.423] I> Binary magic in BCH component 0 is NDEC [0001.428] I> component binary type is 7 [0001.432] I> Size of crypto header is 8192 [0001.440] I> NVDEC binary is read from storage [0001.446] I> NVDEC binary integrity check is success [0001.451] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000) [0001.462] I> Task: Load tsec-fw (0x5001f9a5) [0001.467] I> TSEC-FW load support not enabled [0001.472] I> Task: GPIO interrupt map (0x50014541) [0001.478] I> Task: SC7 context save (0x5001fe9d) [0001.484] I> NV_SC7 Context addr: 0xa0000000 [0001.489] I> Active chain: 0 [0001.492] I> Slot: 0 [0001.495] I> Binary[27] block-0 (partition size: 0x100000) [0001.501] I> get_binary_info: Binary name: BR_BCT [0001.506] I> Size of crypto header is 8192 [0001.511] I> Size of crypto header is 8192 [0001.515] I> BR_BCT binary is read from storage [0001.521] I> BR_BCT binary integrity check is success [0001.526] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.534] I> Active chain: 0 [0001.537] I> Slot: 0 [0001.540] I> Binary[13] block-0 (partition size: 0x30000) [0001.546] I> get_binary_info: Binary name: SC7-FW [0001.551] I> Size of crypto header is 8192 [0001.555] I> Size of crypto header is 8192 [0001.560] I> BCH load address is : 0xa0002000 [0001.565] I> Size of crypto header is 8192 [0001.570] I> BCH of SC7-FW read from storage [0001.575] I> BCH address is : 0xa0002000 [0001.580] I> SC7-FW header integrity check is success [0001.586] I> Binary magic in BCH component 0 is WB0B [0001.591] I> component binary type is 13 [0001.595] I> Size of crypto header is 8192 [0001.601] I> SC7-FW binary is read from storage [0001.607] I> SC7-FW binary integrity check is success [0001.612] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x26220) [0001.621] I> Active chain: 0 [0001.624] I> Slot: 0 [0001.626] I> Binary[22] block-0 (partition size: 0x30000) [0001.632] I> get_binary_info: Binary name: PSC_RF [0001.637] I> Size of crypto header is 8192 [0001.642] I> Size of crypto header is 8192 [0001.646] I> BCH load address is : 0xa002a220 [0001.652] I> Size of crypto header is 8192 [0001.657] I> BCH of PSC_RF read from storage [0001.661] I> BCH address is : 0xa002a220 [0001.667] I> PSC_RF header integrity check is success [0001.672] I> Binary magic in BCH component 0 is PSCR [0001.678] I> component binary type is 22 [0001.682] I> Size of crypto header is 8192 [0001.688] I> PSC_RF binary is read from storage [0001.693] I> PSC_RF binary integrity check is success [0001.699] I> Binary PSC_RF loaded successfully at 0xa002c220 (0x1b000) [0001.721] I> Active chain: 0 [0001.724] I> Slot: 0 [0001.726] I> Binary[14] block-0 (partition size: 0x20000) [0001.732] I> get_binary_info: Binary name: MB2_RF [0001.737] I> Size of crypto header is 8192 [0001.742] I> Size of crypto header is 8192 [0001.747] I> BCH load address is : 0xa008ea48 [0001.752] I> Size of crypto header is 8192 [0001.757] I> BCH of MB2_RF read from storage [0001.762] I> BCH address is : 0xa008ea48 [0001.767] I> MB2_RF header integrity check is success [0001.772] I> Binary magic in BCH component 0 is MB2R [0001.778] I> component binary type is 14 [0001.782] I> Size of crypto header is 8192 [0001.788] I> MB2_RF binary is read from storage [0001.793] I> MB2_RF binary integrity check is success [0001.799] I> Binary MB2_RF loaded successfully at 0xa0090a48 (0x1bfa0) [0001.808] W> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.815] I> SC7 context fuse-bypass data is empty [0001.823] I> SC7 context save done [0001.827] I> Task: Load MB2/Applet/FSKP (0x5000d691) [0001.833] I> Loading MB2 [0001.836] I> Active chain: 0 [0001.839] I> Slot: 0 [0001.842] I> Binary[6] block-0 (partition size: 0x80000) [0001.848] I> get_binary_info: Binary name: MB2 [0001.853] I> Size of crypto header is 8192 [0001.857] I> BCH load address is : 0x8007e000 [0001.863] I> Size of crypto header is 8192 [0001.868] I> BCH of MB2 read from storage [0001.872] I> BCH address is : 0x8007e000 [0001.877] I> MB2 header integrity check is success [0001.882] I> Binary magic in BCH component 0 is MB2B [0001.888] I> component binary type is 6 [0001.892] I> Size of crypto header is 8192 [0001.901] I> MB2 binary is read from storage [0001.907] I> MB2 binary integrity check is success [0001.912] I> Binary MB2 loaded successfully at 0x80000000 (0x68e00) [0001.920] I> Task: Map CCPLEX SHARED carveout (0x5000d835) [0001.927] I> Task: Prepare MB2 params (0x5000d8f1) [0001.935] I> BR-BCT Boot Chain Fields [0001.939] I> u32_non_gpio_select_boot_chain : 0 [0001.944] I> u32_num_boot_chains : 2 [0001.949] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.955] I> Task: Program misc carveouts (0x50014bcd) [0001.961] I> Program IPC carveouts [0001.969] I> Task: Dram ecc test (0x500117a5) [0001.974] I> Task: Misc NV security settings (0x5000d0f9) [0001.981] I> NVDEC sticky bits programming done [0001.986] I> Successfully powergated NVDEC [0001.990] I> Task: Disable/Reload WDT (0x500206e1) [0001.996] I> Programmed SLCG global override := 0x0 [0002.001] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-a9c0116a) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f200a I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x830000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e80) I> Task: Enable hot-plug capability (0x50025b5c) I> Task: PSC mailbox init (0x50015c10) I> Task: Crypto init (0x5000573c) I> Task: Enable GP-SE clock (0x50001fe4) I> Task: DICE Identity init (0x50018fcc) I> DICE is not enabled. I> Task: OEM SC7 context save init (0x500186cc) I> Task: I2C register (0x50001e44) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e2c) I> Task: Boot device init (0x50001d74) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d70) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 14 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Task: Load AUXP FWs (0x500256fc) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82f600000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82f300000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x83a000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9508288 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x83a000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82fc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82f700000 I> Task: Carveout setup (0x5001e6a0) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50015ae4) I> Task: Enable FSI VMON (0x5001566c) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x500156c4) I> FSITHERM max temp = 32 I> FSITHERM min temp = 31 I> Task: Restore XUSB sec (0x50001d44) I> Task: Enable FSI SE clock (0x5001606c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f48) I> Task: Initialize CPUBL Params (0x50016f88) I> CPUBL-params @ 0x836000000 I> Task: Prepare eeprom data (0x50016d54) I> Task: FSI padctl context save (0x5001885c) I> Task: Unpowergate APE (0x500167cc) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> Task: OEM firewalls (0x50022920) I> OEM firewalls configured I> Task: Powergate APE (0x50016940) I> Powergating APE I> Powergate done I> Task: OEM firewall restore saved settings (0x50022ff0) I> Task: Unhalt AUXPs (0x50025964) I> Unhalting SPE.. I> Enabling combined UART spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 243b265b351d6bb9cc7b2e3acc5d90f8 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler I> Task: Trigger mailbox for PSC-BL1 exit (0x50015c90) I> Sending opcode 0x4d420802 to psc INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 I> Received ACK from psc I> TasINFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 INFO: MONITOR: populated user images:13 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. bpmp: socket 0 bpmp: base binary md5 is ccd7dae126b648f6d4de17417b40e939 bpmp: combined binary md5 is 9a7bb16aee9be45a56e6b18b82f5e183 bpmp: firmware tag is 9a7bb16aee9be45a56e6-ccd7dae126b initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator k: Start secure NOR provision (0x50018af8) I> Task: Load FSI keyblob (0x500160b4) I> Skipping FSI key blob copy I> Task: Unhinitialized avfs_clk_platform initialized powergate alt AUXPs (0x5002596c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful initialized dvs I> initialized clk_mach_config initialized pm initialized suspend initialized strap initialized mce_dbell DCE[ 2.450284] Camera-FW on t234-rce-safe started TCU early console enabled. unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x50017080) I> Task: Load TOS (0x50017784) I> Task: Load and authenticate registered FWs (0x5001bfc0) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader initialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq I> Scratch RSV109: 0x00000001 active chain: 0 I> Partitmissing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ion name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binary cpublinitialized clk_cal_late initialized noc_late initialized cvc loaded successfully at 0x82ea00000 initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable sdmmc_legacy_tm initialized [ 2.622292] Camera-FW on t234-rce-safe ready SHA1=10150ec0 (crt 12.951 ms,clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized cactmon initialized extras_post bpmp: init complete total boot 186.018 ms) I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x83fdfe000 I> Relocating OP-TEE dtb from: 0x83feff770 to 0x82ef30000, size: 0x1976 I> [0] START: 0x80000000, SIZE: 0x7aef70000 I> [1] START: 0x836000000, SIZE: 0x2000000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x830000400 I> EKB detected (length: 0x410) @ VA:0x830000400 I> Task: Prepare TOS params (0x500176fc) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82ef30000 I> Task: OEM SC7 context save (0x50018958) I> OEM sc7 context saved I> Task: Disable MSS perf stats (0x500259f8) I> Task: Program display sticky bits (0x50025974) I> Task: Storage device deinit (0x50001eec) I> Task: SMMU external bypass disable (0x50015bf4) I> Task: SMMU init (0x50015b10) I> Task: Program CBB PCIE AMAP regions (0x50018ce0) I> Task: Program GICv3 registers (0x50025a98) I> Task: Audit firewall settings (0x50022c08) I> Task: Bootchain failure check (0x5000242c) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished NOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:30, Jan 24 2023 I/TC: DCE: FW Boot Done I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:20:42 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! I/TC: Primary CPU switching to normal world boot Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ** WARNING: Test Key is used. ** L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 15:09:44 PST 2023 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Jetson AGX Orin [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x808260a98 SMBIOS=0xffff0000 SMBIOS 3.0=0x806570000 MEMATTR=0x80761d018 ESRT=0x8065a8e18 RNG=0x82a9fdf18 MEMRESERVE=0x80761ef18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000008065a8e18 to 0x00000008065a8e50. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000081a800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000837ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000803e68fff] [ 0.000000] node 0: [mem 0x0000000803e69000-0x00000008061bffff] [ 0.000000] node 0: [mem 0x00000008061c0000-0x000000080655ffff] [ 0.000000] node 0: [mem 0x0000000806560000-0x000000080657ffff] [ 0.000000] node 0: [mem 0x0000000806580000-0x000000080680ffff] [ 0.000000] node 0: [mem 0x0000000806810000-0x000000080685ffff] [ 0.000000] node 0: [mem 0x0000000806860000-0x00000008074effff] [ 0.000000] node 0: [mem 0x00000008074f0000-0x000000080753ffff] [ 0.000000] node 0: [mem 0x0000000807540000-0x00000008075dffff] [ 0.000000] node 0: [mem 0x00000008075e0000-0x00000008075fffff] [ 0.000000] node 0: [mem 0x0000000807600000-0x000000080761ffff] [ 0.000000] node 0: [mem 0x0000000807620000-0x000000080763ffff] [ 0.000000] node 0: [mem 0x0000000807640000-0x00000008076fffff] [ 0.000000] node 0: [mem 0x0000000807700000-0x000000080788ffff] [ 0.000000] node 0: [mem 0x0000000807890000-0x000000080797ffff] [ 0.000000] node 0: [mem 0x0000000807980000-0x0000000807b0ffff] [ 0.000000] node 0: [mem 0x0000000807b10000-0x0000000807b9ffff] [ 0.000000] node 0: [mem 0x0000000807ba0000-0x0000000807d7ffff] [ 0.000000] node 0: [mem 0x0000000807d80000-0x0000000807daffff] [ 0.000000] node 0: [mem 0x0000000807db0000-0x0000000807dbffff] [ 0.000000] node 0: [mem 0x0000000807dc0000-0x000000080838ffff] [ 0.000000] node 0: [mem 0x0000000808390000-0x000000080842ffff] [ 0.000000] node 0: [mem 0x0000000808430000-0x000000080852ffff] [ 0.000000] node 0: [mem 0x0000000808530000-0x00000008085cffff] [ 0.000000] node 0: [mem 0x00000008085d0000-0x00000008086cffff] [ 0.000000] node 0: [mem 0x00000008086d0000-0x000000080876ffff] [ 0.000000] node 0: [mem 0x0000000808770000-0x000000080903ffff] [ 0.000000] node 0: [mem 0x0000000809040000-0x000000080921ffff] [ 0.000000] node 0: [mem 0x0000000809220000-0x000000082a9affff] [ 0.000000] node 0: [mem 0x000000082a9b0000-0x000000082a9fffff] [ 0.000000] node 0: [mem 0x000000082aa00000-0x000000082e7fffff] [ 0.000000] node 0: [mem 0x000000082ea00000-0x000000082eefffff] [ 0.000000] node 0: [mem 0x0000000836000000-0x0000000837ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000837ffffff] [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7937792 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 console=tty0 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 31048488K/32257024K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 946392K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000778] Console: colour dummy device 80x25 [ 0.000973] printk: console [tty0] enabled [ 0.001013] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001022] pid_max: default: 32768 minimum: 301 [ 0.001088] LSM: Security Framework initializing [ 0.001110] Yama: becoming mindful. [ 0.001128] SELinux: Initializing. [ 0.001215] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001263] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.003345] rcu: Hierarchical SRCU implementation. [ 0.003450] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.004167] DTS File Name: /media/tct/tct/orin/Linux_for_Tegra/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.004178] DTB Build time: Feb 9 2023 21:22:16 [ 0.005621] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.005743] Remapping and enabling EFI services. [ 0.006967] smp: Bringing up secondary CPUs ... [ 0.035678] Detected PIPT I-cache on CPU1 [ 0.035715] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.035752] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.064407] Detected PIPT I-cache on CPU2 [ 0.064417] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.064432] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.093022] Detected PIPT I-cache on CPU3 [ 0.093031] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.093045] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.123703] Detected PIPT I-cache on CPU4 [ 0.123724] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.123752] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.152408] Detected PIPT I-cache on CPU5 [ 0.152418] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.152432] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.181049] Detected PIPT I-cache on CPU6 [ 0.181060] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.181074] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.209700] Detected PIPT I-cache on CPU7 [ 0.209710] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.209724] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.240383] Detected PIPT I-cache on CPU8 [ 0.240405] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.240432] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.269081] Detected PIPT I-cache on CPU9 [ 0.269092] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.269108] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.298341] Detected PIPT I-cache on CPU10 [ 0.298352] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.298369] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.327594] Detected PIPT I-cache on CPU11 [ 0.327606] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.327623] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.327679] smp: Brought up 1 node, 12 CPUs [ 0.327744] SMP: Total of 12 processors activated. [ 0.327749] CPU features: detected: Privileged Access Never [ 0.327752] CPU features: detected: LSE atomic instructions [ 0.327754] CPU features: detected: User Access Override [ 0.327757] CPU features: detected: 32-bit EL0 Support [ 0.327760] CPU features: detected: Common not Private translations [ 0.327763] CPU features: detected: RAS Extension Support [ 0.327765] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.327769] CPU features: detected: CRC32 instructions [ 0.327771] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.363735] CPU: All CPU(s) started at EL2 [ 0.366199] devtmpfs: initialized [ 0.383759] Registered cp15_barrier emulation handler [ 0.383771] Registered setend emulation handler [ 0.383778] KASLR enabled [ 0.383906] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.383922] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.385615] pinctrl core: initialized pinctrl subsystem [ 0.386176] SMBIOS 3.0.0 present. [ 0.386185] DMI: Unknown Jetson AGX Orin/Jetson AGX Orin, BIOS 2.1-32413640 01/24/2023 [ 0.386462] NET: Registered protocol family 16 [ 0.387296] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.387503] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.387702] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.387731] audit: initializing netlink subsys (disabled) [ 0.387821] audit: type=2000 audit(0.384:1): state=initialized audit_enabled=0 res=1 [ 0.387986] thermal_sys: Registered thermal governor 'step_wise' [ 0.387988] thermal_sys: Registered thermal governor 'power_allocator' [ 0.387993] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.390516] cpuidle: using governor menu [ 0.390632] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.390754] ASID allocator initialised with 32768 entries [ 0.390857] Serial: AMBA PL011 UART driver [ 0.392714] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.392736] Tegra reboot handler registered. [ 0.411616] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2c10000 [ 0.411631] mc: mapped MMIO address: 0xffff800011210000 -> 0x2c20000 [ 0.411639] mc: mapped MMIO address: 0xffff800011230000 -> 0x2c30000 [ 0.411645] mc: mapped MMIO address: 0xffff800011250000 -> 0x2c40000 [ 0.411653] mc: mapped MMIO address: 0xffff800011270000 -> 0x2c50000 [ 0.411660] mc: mapped MMIO address: 0xffff800011290000 -> 0x2b80000 [ 0.411667] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x2b90000 [ 0.411673] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x2ba0000 [ 0.411679] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x2bb0000 [ 0.411688] mc: mapped MMIO address: 0xffff800011310000 -> 0x1700000 [ 0.411695] mc: mapped MMIO address: 0xffff800011330000 -> 0x1710000 [ 0.411702] mc: mapped MMIO address: 0xffff800011350000 -> 0x1720000 [ 0.411708] mc: mapped MMIO address: 0xffff800011370000 -> 0x1730000 [ 0.411715] mc: mapped MMIO address: 0xffff800011390000 -> 0x1740000 [ 0.411722] mc: mapped MMIO address: 0xffff8000113b0000 -> 0x1750000 [ 0.411729] mc: mapped MMIO address: 0xffff8000113d0000 -> 0x1760000 [ 0.411736] mc: mapped MMIO address: 0xffff8000113f0000 -> 0x1770000 [ 0.411748] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.411775] mc-err: mcerr ops are set to t23x [ 0.412451] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 74, base_baud = 0) is a SBSA [ 1.657396] printk: console [ttyAMA0] enabled [ 1.665793] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.672503] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.679202] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.685899] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.694770] ACPI: Interpreter disabled. [ 1.699776] vdd-av1v1-hub: supplied by vdd-5v-sys [ 1.704600] vbusA-cvb: supplied by vdd-5v-sys [ 1.709095] vbusB-cvb: supplied by vdd-5v-sys [ 1.713571] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 1.718550] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 1.723635] iommu: Default domain type: Translated [ 1.728558] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.734820] SCSI subsystem initialized [ 1.738638] usbcore: registered new interface driver usbfs [ 1.744137] usbcore: registered new interface driver hub [ 1.749462] usbcore: registered new device driver usb [ 1.754692] mc: Linux media interface: v0.10 [ 1.758968] videodev: Linux video capture interface: v2.00 [ 1.764592] pps_core: LinuxPPS API ver. 1 registered [ 1.769556] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.778692] PTP clock support registered [ 1.782821] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.789981] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.797639] Registered efivars operations [ 1.802191] FPGA manager framework [ 1.805628] Advanced Linux Sound Architecture Driver Initialized. [ 1.811995] Bluetooth: Core ver 2.22 [ 1.815577] NET: Registered protocol family 31 [ 1.820018] Bluetooth: HCI device and connection manager initialized [ 1.826376] Bluetooth: HCI socket layer initialized [ 1.831254] Bluetooth: L2CAP socket layer initialized [ 1.836311] Bluetooth: SCO socket layer initialized [ 1.841655] camchar: rtcpu character device driver loaded [ 1.847292] clocksource: Switched to clocksource arch_sys_counter [ 2.009998] VFS: Disk quotas dquot_6.6.0 [ 2.013970] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.020986] pnp: PnP ACPI: disabled [ 2.026233] la/ptsa driver initialized. [ 2.030125] NET: Registered protocol family 2 [ 2.034684] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.044443] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 2.053189] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.061483] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.069379] TCP: Hash tables configured (established 262144 bind 65536) [ 2.076094] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.083030] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.090488] NET: Registered protocol family 1 [ 2.095097] RPC: Registered named UNIX socket transport module. [ 2.101030] RPC: Registered udp transport module. [ 2.105735] RPC: Registered tcp transport module. [ 2.110435] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.116885] PCI: CLS 0 bytes, default 64 [ 2.120940] Trying to unpack rootfs image as initramfs... [ 2.237245] Freeing initrd memory: 8208K [ 2.243371] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.251291] kvm [1]: IPA Size Limit: 48 bits [ 2.255770] kvm [1]: VHE mode initialized successfully [ 2.261589] Initialise system trusted keyrings [ 2.266112] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 2.274546] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.280640] NFS: Registering the id_resolver key type [ 2.285708] Key type id_resolver registered [ 2.289890] Key type id_legacy registered [ 2.293933] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.300640] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.308047] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.323840] NET: Registered protocol family 38 [ 2.328289] Key type asymmetric registered [ 2.332384] Asymmetric key parser 'x509' registered [ 2.337280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.344734] io scheduler mq-deadline registered [ 2.349268] io scheduler kyber registered [ 2.357116] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.362717] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.368307] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.373892] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 2.381928] tegra_dc_assign_hw_data: no matching compatible node [ 2.387945] tegradccommon module_init failed [ 2.392215] tegradc module_init failed [ 2.396206] EINJ: ACPI disabled. [ 2.400948] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.407832] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 2.413144] tegra-pmc: ### PMC reset level: L0 [ 2.417585] tegra-pmc: ### PMC reset status reg: 0x0 [ 2.423775] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.439880] random: fast init done [ 2.442861] printk: console [ttyTCU0] enabled [ 4.068760] arm-smmu 12000000.iommu: probing hardware configuration... [ 4.076527] arm-smmu 12000000.iommu: SMMUv2 with: [ 4.081377] arm-smmu 12000000.iommu: stage 1 translation [ 4.086932] arm-smmu 12000000.iommu: stage 2 translation [ 4.092496] arm-smmu 12000000.iommu: nested translation [ 4.097950] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 4.105362] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 4.114219] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 4.120922] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.127613] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.135162] arm-smmu 10000000.iommu: probing hardware configuration... [ 4.141858] arm-smmu 10000000.iommu: SMMUv2 with: [ 4.146682] arm-smmu 10000000.iommu: stage 1 translation [ 4.152225] arm-smmu 10000000.iommu: stage 2 translation [ 4.157763] arm-smmu 10000000.iommu: nested translation [ 4.163214] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 4.170627] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.179419] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.186116] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.192809] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.199942] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.206556] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.211296] arm-smmu 8000000.iommu: stage 1 translation [ 4.216746] arm-smmu 8000000.iommu: stage 2 translation [ 4.222193] arm-smmu 8000000.iommu: nested translation [ 4.227560] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.234896] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.243636] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.250247] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.256854] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.264215] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.274688] tegra_profiler: version: 1.150, samples/io: 50/29 [ 4.280671] tegra_profiler: auth: init [ 4.284827] nvsciipc: loaded module [ 4.289899] tun: Universal TUN/TAP device driver, 1.6 [ 4.295534] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.302958] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.308440] e1000e: Intel(R) PRO/1000 Network Driver [ 4.313529] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.319621] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.325162] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.331030] PPP generic driver version 2.4.2 [ 4.335469] PPP BSD Compression module registered [ 4.340298] PPP Deflate Compression module registered [ 4.345496] PPP MPPE Compression module registered [ 4.350443] usbcore: registered new interface driver r8152 [ 4.356082] usbcore: registered new interface driver asix [ 4.361636] usbcore: registered new interface driver ax88179_178a [ 4.367907] usbcore: registered new interface driver cdc_ether [ 4.373904] usbcore: registered new interface driver net1080 [ 4.379721] usbcore: registered new interface driver cdc_subset [ 4.385813] usbcore: registered new interface driver zaurus [ 4.391548] usbcore: registered new interface driver cdc_ncm [ 4.397367] usbcore: registered new interface driver aqc111 [ 4.403208] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.409560] ohci-pci: OHCI PCI platform driver [ 4.414143] ohci-platform: OHCI generic platform driver [ 4.419786] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 4.426170] usbcore: registered new interface driver uas [ 4.431652] usbcore: registered new interface driver usb-storage [ 4.437949] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 4.444109] mousedev: PS/2 mouse device common for all mice [ 4.449855] usbcore: registered new interface driver xpad [ 4.457266] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.462729] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:29 UTC (29) [ 4.470952] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.477384] i2c /dev entries driver [ 4.481076] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 4.486901] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 4.492653] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 4.498347] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 4.504019] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 4.509689] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 4.515353] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 4.521020] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 4.528773] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.537347] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not enabled endpoint. [ 4.546787] device-mapper: uevent: version 1.0.3 [ 4.551615] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.561411] sdhci: Secure Digital Host Controller Interface driver [ 4.567757] sdhci: Copyright(c) Pierre Ossman [ 4.572228] Synopsys Designware Multimedia Card Interface Driver [ 4.578461] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.584630] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 4.584796] sdhci-tegra 3400000.sdhci: Adding to iommu group 4 [ 4.584909] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.590791] tegra-bpmp bpmp: firmware: 9a7bb16aee9be45a56e6-ccd7dae126b [ 4.611116] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.616529] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 4.622104] nvvrs_pseq 4-003c: CAUTION: interrupt status reg:0x10 set to 0x1 [ 4.629347] nvvrs_pseq 4-003c: Clearing interrupts [ 4.639157] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.645094] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful debugfs initialized [ 5.849972] hid: raw HID events driver (C) Jiri Kosina [ 5.855727] usbcore: registered new interface driver usbhid [ 5.861462] usbhid: USB HID core driver [ 5.866142] tegra-dce d800000.dce: Adding to iommu group 5 [ 5.873148] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 5.882044] tegra234-aon c000000.aon: Adding to iommu group 6 [ 5.888471] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 5.896045] c000000.aon:hsp: probed [ 5.897631] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 5.908028] tegra234-aon c000000.aon: init done [ 5.908357] tegra23x-psc e860000.psc: Adding to iommu group 7 [ 5.912876] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [1] ... [ 5.918942] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 5.927015] dce: dce_admin_setup_clients_ipc:529 Get queue info failed for [2] [ 5.927169] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 5.933458] tegra23x-psc e860000.psc: init done [ 5.940992] dce: dce_admin_setup_clients_ipc:553 Channel Reset Complete for Type [3] ... [ 5.950075] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8 [ 5.954826] dce: dce_start_boot_flow:173 DCE_BOOT_DONE [ 5.963766] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.990604] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 5.999814] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.011403] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 6.022772] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 6.034489] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 6.047052] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 6.059911] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 6.072197] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (124) [ 6.079035] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.090605] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=10150ec03f8849d1537396903b70d4a48a255aba [ 6.104400] t19x_cache tegra-cache: probed [ 6.108927] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 6.130279] optee: probing for conduit method. [ 6.134878] optee: revision 3.19 (18d0f61b) [ 6.135555] optee: dynamic shared memory is enabled [ 6.144976] optee: initialized driver [ 6.162205] nvpmodel: initialized successfully [ 6.166879] tegra_hv: get_hvd: not initialized yet [ 6.171835] user_ivc_mempool: hypervisor not present [ 6.177720] usbcore: registered new interface driver snd-usb-audio [ 6.184916] u32 classifier [ 6.187716] input device check on [ 6.191508] Actions configured [ 6.195168] Initializing XFRM netlink socket [ 6.200028] NET: Registered protocol family 10 [ 6.205918] Segment Routing with IPv6 [ 6.209750] NET: Registered protocol family 17 [ 6.214350] NET: Registered protocol family 15 [ 6.218981] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 6.233055] Bluetooth: RFCOMM socket layer initialized [ 6.238358] Bluetooth: RFCOMM ver 1.11 [ 6.242230] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.248319] Bluetooth: HIDP socket layer initialized [ 6.254022] 9pnet: Installing 9P2000 support [ 6.258481] Key type dns_resolver registered [ 6.263562] registered taskstats version 1 [ 6.267792] Loading compiled-in X.509 certificates [ 6.276465] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 6.287003] tegra194-pcie 14100000.pcie: Adding to iommu group 9 [ 6.299652] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.306820] tegra194-pcie 14160000.pcie: Adding to iommu group 10 [ 6.319049] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.325923] tegra194-pcie 141a0000.pcie: Adding to iommu group 11 [ 6.338132] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 6.370162] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12 [ 6.380608] host1x 13e40000.host1x: Adding to iommu group 13 [ 7.398588] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 7.416517] host1x 13e40000.host1x: initialized [ 7.421584] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14 [ 7.429755] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 7.441737] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15 [ 7.449855] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 7.461841] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16 [ 7.469945] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 7.481936] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17 [ 7.490043] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 7.502049] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18 [ 7.510203] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 7.522200] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19 [ 7.530307] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 7.542314] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20 [ 7.550420] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 7.562411] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21 [ 7.570547] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 7.582554] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22 [ 7.590696] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 7.602703] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23 [ 7.610801] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 7.622819] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24 [ 7.630933] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 7.642914] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25 [ 7.651062] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 7.663083] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26 [ 7.671187] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 7.683187] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27 [ 7.691293] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 7.703328] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28 [ 7.711449] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 7.723444] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29 [ 7.731563] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 7.743600] falcon 15340000.vic: Adding to iommu group 30 [ 7.755083] falcon 15340000.vic: initialized [ 7.759783] falcon 15380000.nvjpg: Adding to iommu group 31 [ 7.769384] falcon 15380000.nvjpg: initialized [ 7.774100] falcon 15540000.nvjpg1: Adding to iommu group 32 [ 7.783405] falcon 15540000.nvjpg1: initialized [ 7.788204] falcon 154c0000.nvenc: Adding to iommu group 33 [ 7.799445] falcon 154c0000.nvenc: initialized [ 7.804164] falcon 15a50000.ofa: Adding to iommu group 34 [ 7.804375] random: crng init done [ 7.815385] falcon 15a50000.ofa: initialized [ 7.819951] nvdec 15480000.nvdec: Adding to iommu group 35 [ 7.832503] nvdec 15480000.nvdec: initialized [ 7.837130] tsec 15500000.tsec: Adding to iommu group 36 [ 7.847902] tsec 15500000.tsec: initialized [ 7.855425] gic 2a41000.agic-controller: GIC IRQ controller registered [ 7.872060] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 7.887366] gpio-394 (camera-control-output-low): hogged as output/low [ 7.894128] gpio-397 (camera-control-output-low): hogged as output/low [ 7.900889] gpio-487 (camera-control-output-low): hogged as output/low [ 7.907654] gpio-486 (camera-control-output-low): hogged as output/low [ 7.915468] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 7.922697] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 7.929683] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 7.936239] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 7.942738] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 7.948977] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 7.957479] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 7.966042] tegra194-isp5 14800000.isp: Adding to iommu group 37 [ 7.975389] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 7.985066] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 7.991654] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 38 [ 8.000006] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 39 [ 8.008112] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 8.018089] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 8.024913] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 8.034877] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 8.041694] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 8.051649] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 8.058519] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 40 [ 8.067352] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 8.078728] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 41 [ 8.087474] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 8.098862] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 42 [ 8.107630] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 8.119028] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 43 [ 8.127772] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 8.139143] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 44 [ 8.147865] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 8.159247] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 45 [ 8.167963] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 8.179378] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 46 [ 8.188117] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 8.199485] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 47 [ 8.208239] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 8.219609] pva 16000000.pva0: Adding to iommu group 48 [ 8.245281] pva 16000000.pva0: initialized [ 8.259063] nvdla 15880000.nvdla0: Adding to iommu group 49 [ 8.274840] nvdla 15880000.nvdla0: initialized [ 8.281051] nvdla 158c0000.nvdla1: Adding to iommu group 50 [ 8.296119] nvdla 158c0000.nvdla1: initialized [ 8.302361] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2 [ 8.309548] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 8.317067] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 8.323705] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 8.330460] serial-tegra 3100000.serial: Adding to iommu group 2 [ 8.337153] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 8.346946] serial-tegra 3110000.serial: Adding to iommu group 2 [ 8.353622] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 72, base_baud = 0) is a TEGRA_UART [ 8.363246] serial-tegra 3130000.serial: Adding to iommu group 2 [ 8.369869] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 73, base_baud = 0) is a TEGRA_UART [ 8.397150] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 8.406925] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.412502] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 8.421116] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 8.430740] tegra-xusb 3610000.xhci: irq 242, io mem 0x03610000 [ 8.437242] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.445752] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.453184] usb usb1: Product: xHCI Host Controller [ 8.458202] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.464484] usb usb1: SerialNumber: 3610000.xhci [ 8.469944] hub 1-0:1.0: USB hub found [ 8.473837] hub 1-0:1.0: 4 ports detected [ 8.478238] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.483805] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 8.491616] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 8.499121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 8.507661] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.515100] usb usb2: Product: xHCI Host Controller [ 8.520115] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.526378] usb usb2: SerialNumber: 3610000.xhci [ 8.532064] hub 2-0:1.0: USB hub found [ 8.535957] hub 2-0:1.0: 4 ports detected [ 8.560588] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing [ 8.584715] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1930000 KHz, changing to: 1958400 KHz [ 8.598370] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2151000 KHz, changing to: 2188800 KHz [ 8.612609] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2006000 KHz, changing to: 2035200 KHz [ 8.625148] tegra194-cpufreq e000000.ccplex: probed with ICC [ 8.634696] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.634919] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 8.642419] mmc0: CQHCI version 5.10 [ 8.650170] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 8.650270] irq: IRQ309: trimming hierarchy from :interrupt-controller@f400000-1 [ 8.657357] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 8.665000] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 309 [ 8.673645] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 8.677849] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 8.696758] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 8.743284] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 8.765250] mmc0: Command Queue Engine enabled [ 8.769822] mmc0: periodic cache flush enabled [ 8.774391] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 8.781403] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 8.786288] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0) [ 8.803109] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 8.811285] tegra194-pcie 14100000.pcie: Link up [ 8.818005] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 8.824841] pci_bus 0001:00: root bus resource [bus 00-ff] [ 8.830482] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 8.840346] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 8.851185] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 8.859113] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 8.865473] pci 0001:00:00.0: PME# supported from D0 D3hot [ 8.875638] pci 0001:01:00.0: [8086:1533] type 00 class 0x020000 [ 8.881972] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 8.888566] pci 0001:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 8.895827] pci 0001:01:00.0: reg 0x18: [io size 0x0020] [ 8.901449] pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 8.905435] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63 [ 8.908940] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 8.916320] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.926879] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff] [ 8.929925] usb 1-3: Product: USB2.1 Hub [ 8.937362] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 8.941388] usb 1-3: Manufacturer: GenesysLogic [ 8.947736] pci 0001:01:00.0: BAR 0: assigned [mem 0x20a8000000-0x20a807ffff] [ 8.953464] hub 1-3:1.0: USB hub found [ 8.959767] pci 0001:01:00.0: BAR 3: assigned [mem 0x20a8080000-0x20a8083fff] [ 8.964315] hub 1-3:1.0: 4 ports detected [ 8.970962] pci 0001:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 8.981367] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 8.986737] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 8.993019] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 9.000372] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.009144] pci 0001:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 9.018088] pcieport 0001:00:00.0: Adding to iommu group 9 [ 9.023976] pcieport 0001:00:00.0: PME: Signaling with IRQ 51 [ 9.030276] pcieport 0001:00:00.0: AER: enabled with IRQ 51 [ 9.031559] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using tegra-xusb [ 9.036338] igb 0001:01:00.0: Adding to iommu group 9 [ 9.048869] igb 0001:01:00.0: enabling device (0000 -> 0002) [ 9.072268] usb 2-3: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.63 [ 9.080684] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.088033] usb 2-3: Product: USB3.1 Hub [ 9.092067] usb 2-3: Manufacturer: GenesysLogic [ 9.096354] hub 2-3:1.0: USB hub found [ 9.096737] pps pps0: new PPS source ptp0 [ 9.102206] hub 2-3:1.0: 4 ports detected [ 9.104927] igb 0001:01:00.0: added PHC on eth0 [ 9.113518] igb 0001:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 9.120598] igb 0001:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 48:b0:2d:78:bc:c8 [ 9.128032] igb 0001:01:00.0: eth0: PBA No: 000300-000 [ 9.133317] igb 0001:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 9.141821] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 9.149427] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 9.156599] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 9.165282] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 9.173967] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 9.195284] usb 1-4: new high-speed USB device number 3 using tegra-xusb [ 9.287448] tegra194-pcie 14160000.pcie: Link up [ 9.293329] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 9.300153] pci_bus 0004:00: root bus resource [bus 00-ff] [ 9.305795] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 9.315912] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 9.326744] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 9.334669] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 9.341001] pci 0004:00:00.0: PME# supported from D0 D3hot [ 9.351069] pci 0004:01:00.0: [144d:a809] type 00 class 0x010802 [ 9.357430] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 9.365584] usb 1-4: New USB device found, idVendor=1e0e, idProduct=9001, bcdDevice= 3.18 [ 9.369972] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff] [ 9.374002] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.381438] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit] [ 9.381523] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 9.388808] usb 1-4: Product: SimTech, Incorporated [ 9.396691] pci 0004:00:00.0: bridge window [mem 0x2428000000-0x24280fffff] [ 9.402053] usb 1-4: Manufacturer: SimTech, Incorporated [ 9.407076] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 9.414410] usb 1-4: SerialNumber: 0123456789ABCDEF [ 9.419925] pci 0004:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 9.442553] pcieport 0004:00:00.0: Adding to iommu group 10 [ 9.448528] pcieport 0004:00:00.0: PME: Signaling with IRQ 53 [ 9.454820] pcieport 0004:00:00.0: AER: enabled with IRQ 53 [ 9.460878] nvme 0004:01:00.0: Adding to iommu group 10 [ 9.466707] nvme nvme0: pci function 0004:01:00.0 [ 9.471633] nvme 0004:01:00.0: enabling device (0000 -> 0002) [ 9.477578] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 9.483587] nvme nvme0: Shutdown timeout set to 8 seconds [ 9.489598] usb 1-3.1: new full-speed USB device number 4 using tegra-xusb [ 9.489687] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 9.501705] avdd-cam-2v8: supplied by vdd-3v3-sys [ 9.506637] vdd-dp: supplied by vdd-3v3-sys [ 9.511096] vdd-3v3-sd: supplied by vdd-3v3-sys [ 9.514280] nvme nvme0: allocated 64 MiB host memory buffer. [ 9.516052] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 9.528727] tegra194-isp5 14800000.isp: initialized [ 9.537648] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 9.544103] (NULL device *): fops function table already registered [ 9.552408] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 9.559542] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 9.559608] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 9.583466] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 309 [ 9.588930] nvme nvme0: 12/0/0 default/read/poll queues [ 9.629959] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c247, bcdDevice=82.10 [ 9.638552] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.646067] usb 1-3.1: Product: G90 Optical Gaming Mouse [ 9.651529] usb 1-3.1: Manufacturer: Logitech [ 9.661621] input: Logitech G90 Optical Gaming Mouse as /devices/platform/3610000.xhci/usb1/1-3/1-3.1/1-3.1:1.0/0003:046D:C247.0001/input/input0 [ 9.675258] hid-generic 0003:046D:C247.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G90 Optical Gaming Mouse] on usb-3610000.xhci-3.1/input0 [ 9.688931] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 9.696124] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 9.704831] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 9.713516] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 9.791281] usb 1-3.2: new low-speed USB device number 5 using tegra-xusb [ 9.933457] usb 1-3.2: New USB device found, idVendor=1a2c, idProduct=4d7e, bcdDevice= 1.10 [ 9.942045] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.949563] usb 1-3.2: Product: USB Keyboard [ 9.953955] usb 1-3.2: Manufacturer: SEMICO [ 9.964358] input: SEMICO USB Keyboard as /devices/platform/3610000.xhci/usb1/1-3/1-3.2/1-3.2:1.0/0003:1A2C:4D7E.0002/input/input1 [ 10.035942] hid-generic 0003:1A2C:4D7E.0002: input,hidraw1: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-3610000.xhci-3.2/input0 [ 10.055435] input: SEMICO USB Keyboard Consumer Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.2/1-3.2:1.1/0003:1A2C:4D7E.0003/input/input2 [ 10.127665] input: SEMICO USB Keyboard System Control as /devices/platform/3610000.xhci/usb1/1-3/1-3.2/1-3.2:1.1/0003:1A2C:4D7E.0003/input/input3 [ 10.141321] input: SEMICO USB Keyboard as /devices/platform/3610000.xhci/usb1/1-3/1-3.2/1-3.2:1.1/0003:1A2C:4D7E.0003/input/input5 [ 10.153921] hid-generic 0003:1A2C:4D7E.0003: input,hiddev96,hidraw2: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-3610000.xhci-3.2/input1 [ 10.635267] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 10.828767] tegra194-pcie 141a0000.pcie: Phy link never came up [ 10.834955] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 10.841757] pci_bus 0005:00: root bus resource [bus 00-ff] [ 10.847389] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 10.857486] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 10.868313] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 10.876236] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 10.882566] pci 0005:00:00.0: PME# supported from D0 D3hot [ 10.896047] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 10.901447] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 10.910416] pcieport 0005:00:00.0: Adding to iommu group 11 [ 10.916409] pcieport 0005:00:00.0: PME: Signaling with IRQ 55 [ 10.922708] pcieport 0005:00:00.0: AER: enabled with IRQ 55 [ 10.928676] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 10.934761] pci 0005:00:00.0: Removing from iommu group 11 [ 10.940408] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 10.948093] nvethernet 2310000.ethernet: Adding to iommu group 51 [ 10.954543] nvethernet 2310000.ethernet: failed to read skip mac reset flag, default 0 [ 10.962709] nvethernet 2310000.ethernet: failed to read MDIO address [ 10.969269] nvethernet 2310000.ethernet: setting to default DMA bit mask [ 10.976177] nvethernet 2310000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 10.985036] nvethernet 2310000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 11.239267] nvethernet 2310000.ethernet: Ethernet MAC address: 48:b0:2d:78:bc:c6 [ 11.247300] nvethernet 2310000.ethernet: Macsec not enabled [ 11.253035] nvethernet 2310000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 11.261565] nvethernet 2310000.ethernet: eth1 (HW ver: 53) created with 8 DMA channels [ 11.269901] nvethernet 6810000.ethernet: Adding to iommu group 52 [ 11.276444] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 11.284600] nvethernet 6810000.ethernet: failed to read MDIO address [ 11.291135] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 11.298024] nvethernet 6810000.ethernet: Failed to read DMA Tx ring size, using default [4096] [ 11.306876] nvethernet 6810000.ethernet: Failed to read DMA Tx ring size, using default [4096] [ 11.315727] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- default to 10G [ 11.708258] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:78:bc:c6 [ 11.716195] nvethernet 6810000.ethernet: Macsec not enabled [ 11.721930] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 11.731008] nvethernet 6810000.ethernet: eth2 (HW ver: 31) created with 10 DMA channels [ 11.739709] irq: IRQ329: trimming hierarchy from :pmc@c360000 [ 11.745683] irq: IRQ330: trimming hierarchy from :interrupt-controller@f400000-1 [ 11.753356] irq: IRQ331: trimming hierarchy from :pmc@c360000 [ 11.759312] input: gpio-keys as /devices/platform/gpio-keys/input/input6 [ 11.766932] tegra-se-nvhost 15810000.se: Adding to iommu group 53 [ 11.773542] tegra-se-nvhost 15810000.se: initialized [ 11.789739] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 11.796099] tegra-se-nvhost 15820000.se: Adding to iommu group 54 [ 11.802637] tegra-se-nvhost 15820000.se: initialized [ 11.810119] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 11.816471] tegra-se-nvhost 15840000.se: Adding to iommu group 55 [ 11.823046] tegra-se-nvhost 15840000.se: initialized [ 11.830355] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 11.837176] tegra_actmon d230000.actmon: in actmon_register()... [ 11.843495] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 11.849508] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 11.857886] hvc_sysfs: hypervisor is not present WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk [ 11.992294] ALSA device list: [ 11.995349] No soundcards found. [ 11.999430] Freeing unused kernel memory: 3968K [ 12.004165] Run /init as init process [ 12.019902] Root device found: mmcblk0p1 [ 12.024418] Found dev node: /dev/mmcblk0p1 [ 12.405577] EXT4-fs (mmcblk0p1): 6 orphan inodes deleted [ 12.411060] EXT4-fs (mmcblk0p1): recovery complete [ 12.427404] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 12.436823] Rootfs mounted over mmcblk0p1 [ 12.456387] Switching from initrd to actual rootfs [ 12.552161] systemd[1]: System time before build time, advancing clock. [ 12.593420] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 12.617153] systemd[1]: Detected architecture arm64. [ 12.654842] systemd[1]: Set hostname to . [ 12.827777] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 12.840859] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 12.850443] systemd[1]: Created slice system-modprobe.slice. [ 12.856641] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.863382] systemd[1]: Created slice User and Session Slice. [ 12.869444] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.877538] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.887327] systemd[1]: Reached target User and Group Name Lookups. [ 12.893845] systemd[1]: Reached target Slices. [ 12.898468] systemd[1]: Reached target Swap. [ 12.903123] systemd[1]: Listening on RPCbind Server Activation Socket. [ 12.909983] systemd[1]: Listening on Syslog Socket. [ 12.915140] systemd[1]: Listening on fsck to fsckd communication Socket. [ 12.922146] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 12.929115] systemd[1]: Listening on Journal Audit Socket. [ 12.934899] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.941145] systemd[1]: Listening on Journal Socket. [ 12.946435] systemd[1]: Listening on udev Control Socket. [ 12.952108] systemd[1]: Listening on udev Kernel Socket. [ 12.958584] systemd[1]: Mounting Huge Pages File System... [ 12.965218] systemd[1]: Mounting POSIX Message Queue File System... [ 12.972548] systemd[1]: Mounting RPC Pipe File System... [ 12.978916] systemd[1]: Mounting Kernel Debug File System... [ 12.985636] systemd[1]: Mounting Kernel Trace File System... [ 12.992659] systemd[1]: Starting Journal Service... [ 12.998778] systemd[1]: Starting Set the console keyboard layout... [ 13.006183] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 13.015931] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 13.023389] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 13.032777] systemd[1]: Starting Load Kernel Module efi_pstore... [ 13.040745] systemd[1]: Starting Load Kernel Module pstore_blk... [ 13.048304] systemd[1]: Starting Load Kernel Module pstore_zone... [ 13.055675] systemd[1]: Starting Load Kernel Module ramoops... [ 13.062669] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 13.070795] systemd[1]: Started Nameserver information manager. [ 13.077080] systemd[1]: Reached target Network (Pre). [ 13.083099] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 13.092456] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 13.109538] systemd[1]: Starting Load Kernel Modules... [ 13.115886] systemd[1]: Starting Remount Root and Kernel File Systems... [ 13.123795] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 13.123816] systemd[1]: Starting udev Coldplug all Devices... [ 13.124620] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 13.124721] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x0000000833000000,16777216 [ 13.124723] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 13.124729] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272 [ 13.124730] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 13.124734] nvmap_page_pool_init: Total RAM pages: 7830702 [ 13.124736] nvmap_page_pool_init: nvmap page pool size: 978837 pages (3823 MB) [ 13.124902] nvmap_background_zero_thread: PP zeroing thread starting. [ 13.124980] misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB) [ 13.128018] misc nvmap: created heap fsi base 0x0000000833000000 size (16384KiB) [ 13.196131] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 13.196131] [ 13.229148] systemd[1]: Started Journal Service. [ 13.258183] systemd-journald[302]: Received client request to flush runtime journal. [ 13.573994] nvidia: loading out-of-tree module taints kernel. [ 13.579848] using random self ethernet address [ 13.584868] using random host ethernet address [ 13.671742] rt5640 8-001c: Device with ID register 0xffff60ec is not rt5640/39 [ 13.870836] ucsi_ccg 1-0008: i2c_transfer failed -121 [ 13.876083] ucsi_ccg 1-0008: ucsi_ccg_init failed - -121 [ 13.885168] ucsi_ccg: probe of 1-0008 failed with error -121 [ 14.326093] using random self ethernet address [ 14.330705] using random host ethernet address [ 16.431146] CPU8: shutdown [ 16.565956] CPU9: shutdown [ 16.679369] CPU10: shutdown [ 16.765860] IRQ 129: no longer affine to CPU11 [ 16.771252] CPU11: shutdown Ubuntu 20.04.5 LTS tct-desktop ttyTCU0 tct-desktop login: [ 27.955304] [eqos_poll_for_swr][598][type:0x4][loga-0x0] poll_for_swr: timeout [ 27.962791] net eth1: failed to poll MAC Software reset [ 30.387574] Aquantia AQR113C 6810000.ethernet:00: aqr107_wait_reset_complete failed: -110 tct-desktop login: tct Password: Welcome to Ubuntu 20.04.5 LTS (GNU/Linux 5.10.104-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 12 updates can be applied immediately. 8 of these updates are standard security updates. To see these additional updates run: apt list --upgradable Last login: 鍥9鏈 8 19:17:42 CST 2022 on ttyTCU0 tct@tct-desktop:~$ ifconfig eth0: flags=4099 mtu 1500 ether 48:b0:2d:78:bc:c8 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0x20a8000000-20a807ffff eth2: flags=4099 mtu 1466 ether 48:b0:2d:78:bc:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 254 bytes 17710 (17.7 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 254 bytes 17710 (17.7 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 rndis0: flags=4099 mtu 1500 ether ae:5e:79:d6:db:99 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 usb0: flags=4099 mtu 1500 ether ae:5e:79:d6:db:9b txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 tct@tct-desktop:~$ ifconfig -a dummy0: flags=130 mtu 1500 ether f6:b4:aa:4c:86:df txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4099 mtu 1500 ether 48:b0:2d:78:bc:c8 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0x20a8000000-20a807ffff eth1: flags=4098 mtu 1466 ether 48:b0:2d:78:bc:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth2: flags=4099 mtu 1466 ether 48:b0:2d:78:bc:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 l4tbr0: flags=4098 mtu 1500 ether ae:5e:79:d6:db:99 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 254 bytes 17710 (17.7 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 254 bytes 17710 (17.7 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 rndis0: flags=4099 mtu 1500 ether ae:5e:79:d6:db:99 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 usb0: flags=4099 mtu 1500 ether ae:5e:79:d6:db:9b txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0