[0000.269] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-03715cad) [0000.277] I> Boot-device: eMMC [0000.285] I> sdmmc bdev is already initialized [0000.289] I> pmic: reset reason (nverc) : 0x40 [0000.322] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.342] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.348] W> No valid slot number is found in scratch register [0000.354] W> Return default slot: _a [0000.357] I> A/B: bin_type (16) slot 0 [0000.361] I> Loading partition bpmp-fw at 0xd7800000 [0000.366] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.371] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.396] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.402] W> No valid slot number is found in scratch register [0000.408] W> Return default slot: _a [0000.411] I> A/B: bin_type (17) slot 0 [0000.415] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.420] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.425] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.451] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.682] I> Loading SCE-FW ... [0000.685] W> No valid slot number is found in scratch register [0000.691] W> Return default slot: _a [0000.694] I> A/B: bin_type (12) slot 0 [0000.698] I> Loading partition sce-fw at 0xd7300000 [0000.702] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.708] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.727] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.733] I> Init SCE [0000.735] I> Loading APE-FW ... [0000.738] W> No valid slot number is found in scratch register [0000.744] W> Return default slot: _a [0000.747] I> A/B: bin_type (11) slot 0 [0000.751] I> Loading partition adsp-fw at 0xd7400000 [0000.755] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.761] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.780] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.786] I> Copy BTCM section [0000.789] W> No valid slot number is found in scratch register [0000.794] W> Return default slot: _a [0000.798] I> A/B: bin_type (13) slot 0 [0000.801] I> Loading partition cpu-bootloader at 0x96000000 [0000.807] I> Reading two headers - addr:0x96000000 blocks:1 [0000.812] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.833] I> Binary(13) of size 302064 is loaded @ 0x96000000 [0000.839] W> No valid slot number is found in scratch register [0000.845] W> Return default slot: _a [0000.848] I> A/B: bin_type (20) slot 0 [0000.852] I> Loading partition bootloader-dtb at 0x8520f400 [0000.857] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.863] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.884] I> Binary(20) of size 374528 is loaded @ 0x8520f400 [0000.890] W> No valid slot number is found in scratch register [0000.896] W> Return default slot: _a [0000.899] I> A/B: bin_type (14) slot 0 [0000.903] I> Loading partition secure-os at 0x8530f600 [0000.908] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.913] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.935] I> Binary(14) of size 394672 is loaded @ 0x8530f600 [0000.943] I> TOS boot-params @ 0x85000000 [0000.947] I> TOS params prepared [0000.950] I> Loading EKS ... [0000.953] I> A/B: bin_type (15) slot 0 [0000.956] I> Loading partition eks at 0x8590f800 [0000.961] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.966] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.985] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.991] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.996] I> Copied encrypted keys [0000.999] I> boot profiler @ 0x275844000 [0001.003] I> boot profiler for TOS @ 0x275844000 [0001.008] I> Unhalting SCE [0001.011] I> Primary Memory Start:80000000 Size:70000000 [0001.016] I> Extended Memory Start:f0110000 Size:1856f0000 [0001.023] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 08:38:54, Feb 19 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 197: key_mgnt_processing ....... hwkey-agent: 189: Setting EKB key 0 to slot 14 hwkey-agent: 167: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.365] I> Welcome to Cboot [0001.368] I> Cboot Version: t186-28749d1d [0001.372] I> CPU-BL Params @ 0x275800000 [0001.376] I> 0) Base:0x00000000 Size:0x00000000 [0001.380] I> 1) Base:0x277f00000 Size:0x00100000 [0001.385] I> 2) Base:0x277e00000 Size:0x00100000 [0001.389] I> 3) Base:0x277d00000 Size:0x00100000 [0001.394] I> 4) Base:0x277c00000 Size:0x00100000 [0001.398] I> 5) Base:0x277b00000 Size:0x00100000 [0001.403] I> 6) Base:0x277800000 Size:0x00200000 [0001.407] I> 7) Base:0x277400000 Size:0x00400000 [0001.412] I> 8) Base:0x277a00000 Size:0x00100000 [0001.416] I> 9) Base:0x277300000 Size:0x00100000 [0001.421] I> 10) Base:0x276800000 Size:0x00800000 [0001.425] I> 11) Base:0x30000000 Size:0x00040000 [0001.430] I> 12) Base:0xf0000000 Size:0x00100000 [0001.434] I> 13) Base:0x30040000 Size:0x00001000 [0001.439] I> 14) Base:0x30048000 Size:0x00001000 [0001.443] I> 15) Base:0x30049000 Size:0x00001000 [0001.448] I> 16) Base:0x3004a000 Size:0x00001000 [0001.452] I> 17) Base:0x3004b000 Size:0x00001000 [0001.456] I> 18) Base:0x3004c000 Size:0x00001000 [0001.461] I> 19) Base:0x3004d000 Size:0x00001000 [0001.465] I> 20) Base:0x3004e000 Size:0x00001000 [0001.470] I> 21) Base:0x3004f000 Size:0x00001000 [0001.474] I> 22) Base:0x00000000 Size:0x00000000 [0001.479] I> 23) Base:0xf0100000 Size:0x00010000 [0001.483] I> 24) Base:0x00000000 Size:0x00000000 [0001.487] I> 25) Base:0x00000000 Size:0x00000000 [0001.492] I> 26) Base:0x00000000 Size:0x00000000 [0001.496] I> 27) Base:0x00000000 Size:0x00000000 [0001.501] I> 28) Base:0x84400000 Size:0x00400000 [0001.505] I> 29) Base:0x30000000 Size:0x00010000 [0001.510] I> 30) Base:0x278000000 Size:0x08000000 [0001.514] I> 31) Base:0x00000000 Size:0x00000000 [0001.519] I> 32) Base:0x276000000 Size:0x00600000 [0001.523] I> 33) Base:0x80000000 Size:0x70000000 [0001.527] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.532] I> 35) Base:0x00000000 Size:0x00000000 [0001.536] I> 36) Base:0x00000000 Size:0x00000000 [0001.541] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.545] I> 38) Base:0x84000000 Size:0x00400000 [0001.550] I> 39) Base:0x96000000 Size:0x02000000 [0001.554] I> 40) Base:0x85000000 Size:0x01200000 [0001.559] I> 41) Base:0x275800000 Size:0x00500000 [0001.563] I> 42) Base:0x00000000 Size:0x00000000 [0001.568] I> 43) Base:0x00000000 Size:0x00000000 [0001.572] GIC-SPI Target CPU: 4 [0001.575] Interrupts Init done [0001.579] calling constructors [0001.582] initializing heap [0001.584] initializing threads [0001.588] initializing timers [0001.591] creating bootstrap completion thread [0001.595] top of bootstrap2() [0001.599] CPU: ARM Cortex A57 [0001.602] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.607] initializing platform [0001.610] I> Bl_dtb @0x8520f400 [0001.613] I> gpio framework initialized [0001.619] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.630] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.637] I> GPIO framework and drivers are initialized. [0001.642] I> Boot-device: eMMC [0001.650] I> sdmmc bdev is already initialized [0001.680] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.698] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.703] W> opt-in fuse is not set, skip fuse_burning [0001.708] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.714] W> No valid slot number is found in scratch register [0001.719] W> Return default slot: _a [0001.729] I> A/B: bin_type (21) slot 0 [0001.732] I> Loading kernel-dtb from partition [0001.737] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.754] I> Kernel_dtb @0x80000000 [0001.757] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.768] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.775] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.784] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.794] I> fixed regulator driver initialized [0001.828] I> register 'maxim' power off handle [0001.834] I> virtual i2c enabled [0001.837] I> registered 'maxim,max77620' pmic [0001.842] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.855] I> Find /i2c@c250000's alias i2c7 [0001.859] I> Reading eeprom i2c=7 address=0x50 [0001.888] I> Device at /i2c@c250000:0x50 [0001.892] I> Reading eeprom i2c=7 address=0x57 [0001.921] I> Device at /i2c@c250000:0x57 [0001.925] I> Find /i2c@c240000's alias i2c1 [0001.929] I> Reading eeprom i2c=1 address=0x51 [0001.934] E> I2C: slave not found in slaves. [0001.938] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.946] E> I2C_DEV: Failed to send register address 0x00000000. [0001.952] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.961] E> eeprom: Retry to read I2C slave device. [0001.966] E> I2C: slave not found in slaves. [0001.970] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.978] E> I2C_DEV: Failed to send register address 0x00000000. [0001.984] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.993] E> eeprom: Failed to read I2C slave device [0001.998] I> Eeprom read failed 0x3526070d [0002.003] I> Find /i2c@3160000's alias i2c0 [0002.007] I> Reading eeprom i2c=0 address=0x50 [0002.011] E> I2C: slave not found in slaves. [0002.015] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.023] E> I2C_DEV: Failed to send register address 0x00000000. [0002.029] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.038] E> eeprom: Failed to read I2C slave device [0002.043] I> Eeprom read failed 0x3526070d [0002.048] I> Find /i2c@3180000's alias i2c2 [0002.052] I> Reading eeprom i2c=2 address=0x54 [0002.056] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.087] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.092] I> Device at /i2c@3180000:0x54 [0002.096] I> Reading eeprom i2c=2 address=0x57 [0002.100] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.106] E> I2C: slave not found in slaves. [0002.110] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.117] E> I2C_DEV: Failed to send register address 0x00000000. [0002.123] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.133] E> eeprom: Failed to read I2C slave device [0002.137] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.143] I> Eeprom read failed 0x00000000 [0002.147] I> create_pm_ids: id: 3310-1000-D02-K, len: 15 [0002.152] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.163] I> create_pm_ids: id: 2597-0000-501-C, len: 15 [0002.168] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.179] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0002.184] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0002.219] I> enabling 'vdd-hdmi' regulator [0002.234] I> regulator 'vdd-hdmi' already enabled [0002.239] I> hdmi cable connected [0002.248] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0002.260] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0002.268] E> cannot find any other nvdisp nodes [0002.289] I> edid read success [0002.305] I> edid read success [0002.307] I> width = 640, height = 480, frequency = 25174825 [0002.313] I> width = 640, height = 480, frequency = 25174825 [0002.318] I> width = 640, height = 480, frequency = 25174825 [0002.324] I> width = 640, height = 480, frequency = 25174825 [0002.329] I> width = 1920, height = 1080, frequency = 148500000 [0002.335] I> Best mode Width = 640, Height = 480, freq = 25174825 [0002.345] I> hdmi_enable, starting HDMI initialisation [0002.353] I> hdmi_enable, HDMI initialisation complete [0002.359] initializing target [0002.362] calling apps_init() [0002.365] starting app kernel_boot_app [0002.387] I> found decompressor handler: lz4-legacy [0002.392] I> decompressing BMP blob ... [0002.404] I> Kernel type = Normal [0002.407] I> Loading kernel-bootctrl from partition [0002.412] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.426] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.433] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.440] I> ########## Fixed storage boot ########## [0002.445] W> No valid slot number is found in scratch register [0002.451] W> Return default slot: _a [0002.454] I> A/B: bin_type (24) slot 0 [0002.470] I> Boot image size read from image header: 97de5 [0002.475] I> Boot image load address: 0x80400000 [0002.479] I> Loading kernel from partition [0002.483] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.426] I> Validate kernel ... [0003.429] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.437] I> Checking boot.img header magic ... [0003.441] I> [OK] [0003.443] I> kernel-dtb is already loaded [0003.446] I> Validate kernel-dtb ... [0003.450] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.457] I> Kernel hdr @0x80400000 [0003.461] I> Kernel dtb @0x80000000 [0003.464] I> decompressor handler not found [0003.468] I> Copying kernel image (622053 bytes) from 0x80400800 to 0x80600000 ... [0003.476] I> Done [0003.477] I> Move ramdisk (len: 0) from 0x80498800 to 0x947d0000 [0003.485] I> Updated bpmp info to DTB [0003.491] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0003.495] I> Updated initrd info to DTB [0003.499] W> WARN: Fail to override "console=none" in commandline [0003.505] I> Active rootfs suffix: [0003.508] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.515] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.523] I> disabled_core_mask: 0xffffff0c [0003.527] W> No valid slot number is found in scratch register [0003.532] W> Return default slot: _a [0003.536] I> Active slot suffix: [0003.539] I> add_boot_slot_suffix: slot_suffix = [0003.543] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x140000@0x96081000 lut_mem2=0x2008@0x9607e000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.596] I> Updated bootarg info to DTB [0003.600] I> eeprom_get_mac_addr: MAC (type: 0): 48:b0:2d:1c:e9:8a [0003.606] I> eeprom_get_mac_addr: MAC (type: 1): 48:b0:2d:1c:e9:8b [0003.612] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:1c:e9:8c [0003.619] E> Found no plugin manager ids in source DT [0003.623] W> Add plugin manager ids from board info [0003.628] W> "plugin-manager" doesn't exist, creating [0003.633] W> "ids" doesn't exist, creating [0003.637] W> "connection" doesn't exist, creating [0003.642] W> "configs" doesn't exist, creating [0003.646] I> create_pm_ids: id: 3310-1000-D02-K, len: 15 [0003.651] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.662] I> create_pm_ids: id: 2597-0000-501-C, len: 15 [0003.667] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.678] I> create_pm_ids: id: 3326-1000-100-M, len: 15 [0003.683] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0003.694] I> Adding plugin-manager/ids/3310-1000-D02=/i2c@c250000:module@0x50 [0003.701] W> "i2c@c250000" doesn't exist, creating [0003.706] W> "module@0x50" doesn't exist, creating [0003.711] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57 [0003.718] W> "module@0x57" doesn't exist, creating [0003.723] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54 [0003.730] W> "i2c@3180000" doesn't exist, creating [0003.735] W> "module@0x54" doesn't exist, creating [0003.742] I> Adding plugin-manager/ids/3310-1000-D02-K [0003.749] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.755] I> Adding plugin-manager/configs/3310-power-config 00 [0003.761] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.767] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.773] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.778] I> Adding plugin-manager/configs/3310-display-config 00 [0003.785] I> Adding plugin-manager/cvm [0003.789] W> "chip-id" doesn't exist, creating [0003.793] I> Adding plugin-manager/chip-id/A02P [0003.797] W> "odm-data" doesn't exist, creating [0003.802] I> Adding /chosen/plugin-manager/odm-data [0003.812] I> added [base:0x80000000, size:0x70000000] to /memory [0003.818] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.824] I> added [base:0x275e00000, size:0x200000] to /memory [0003.829] I> added [base:0x276600000, size:0x200000] to /memory [0003.835] I> added [base:0x277000000, size:0x200000] to /memory [0003.841] I> Updated memory info to DTB [0003.845] E> add_disp_param: failed to get display params for du=1 [0003.853] W> "reset" doesn't exist, creating [0003.857] W> "pmc-reset-reason" doesn't exist, creating [0003.863] W> "pmic-reset-reason" doesn't exist, creating [0003.869] I> Adding ecid(0000000164056082000000000f040180) to DT [0003.875] I> disabled_core_mask: 0xffffff0c [0003.888] I> Add serial number:1421821000773 as DT property [0003.897] I> Plugin-manager override starting [0003.902] I> node /plugin-manager/fragement@0 matches [0003.913] I> node /plugin-manager/fragement@4 matches [0003.925] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.945] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.955] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.964] I> node /plugin-manager/fragment-devslp@0 matches [0003.976] I> node /plugin-manager/fragment-500-pcie-config matches [0003.991] I> node /plugin-manager/fragment-500-xusb-config matches [0004.014] I> node /plugin-manager/fragment-p3310-c00-comm matches [0004.027] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0004.038] I> node /plugin-manager/fragment-p3310-c01 matches [0004.051] I> node /plugin-manager/fragment-p3310-c03 matches [0004.086] I> node /plugin-manager/fragment-e3326@0 matches [0004.168] I> node /plugin-manager/fragment-p3310-c00-camera matches [0004.195] I> Disable plugin-manager status in FDT [0004.200] I> Plugin-manager override finished successfully [0004.205] I> tegrabl_load_kernel_and_dtb: Done [0004.215] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g6b630d64fd (Feb 19 2021 - 08:38:59 -0800) SoC: tegra186 Model: NVIDIA P2771-0000-500 Board: NVIDIA P2771-0000 DRAM: 7.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 733 bytes read in 20 ms (35.2 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 5565140 bytes read in 147 ms (36.1 MiB/s) Retrieving file: /boot/Image 34191368 bytes read in 821 ms (39.7 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x140000@0x96081000 lut_mem2=0x2008@0x9607e000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 0000000080060699 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-1935) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:52:02 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00140000@96081000 [ 0.000000] Found lut_mem2: 00002008@9607e000 [ 1.340749] tegra-asoc: sound: Can't retrieve clk ahub [ 3.612615] cgroup: cgroup2: unknown option "nsdelegate" [ 4.701386] using random self ethernet address [ 4.734333] using random host ethernet address [ 5.309927] using random self ethernet address [ 5.318221] using random host ethernet address [ 5.668009] tegra-i2c 3180000.i2c: no acknowledge from address 0x50 [ 5.674443] ov5693 2-0036: Error -121 reading eeprom [ 5.683856] ov5693 2-0036: board setup failed [ 5.690651] ov5693: probe of 2-0036 failed with error -121 [ 7.733271] vdd-1v8: voltage operation not allowed [ 7.733290] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.753138] vdd-1v8: voltage operation not allowed [ 7.753162] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.774016] vdd-1v8: voltage operation not allowed [ 7.774037] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.776556] vdd-1v8: voltage operation not allowed [ 7.776571] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.888667] vdd-1v8: voltage operation not allowed [ 7.888688] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.889710] vdd-1v8: voltage operation not allowed [ 7.889729] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 7.891381] vdd-1v8: voltage operation not allowed [ 7.891398] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.3 LTS superbin-desktop ttyS0 superbin-desktop login: