[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.299+ (root@choi-MS-7D31) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #21 SMP PREEMPT Thu Feb 9 17:09:10 KST 2023 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@96088000 [ 0.000000] Found lut_mem2: 00002008@96085000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2053117 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x800000@0x96088000 lut_mem2=0x2008@0x96085000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29716(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7269792K/8212468K available (15550K kernel code, 2976K rwdata, 6804K rodata, 8704K init, 636K bss, 189012K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008fb0000 ( 15552 KB) [ 0.000000] .rodata : 0xffffff8008fb0000 - 0xffffff8009660000 ( 6848 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ee0000 ( 8704 KB) [ 0.000000] .data : 0xffffff8009ee0000 - 0xffffff800a1c8008 ( 2977 KB) [ 0.000000] .bss : 0xffffff800a1c8008 - 0xffffff800a2672ac ( 637 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001126] Console: colour dummy device 80x25 [ 0.001131] console [tty0] enabled [ 0.001135] bootconsole [uart8250] disabled [ 0.001142] kmemleak: Kernel memory leak detector disabled [ 0.001151] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001158] pid_max: default: 32768 minimum: 301 [ 0.001463] Security Framework initialized [ 0.001616] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.001621] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002234] ftrace: allocating 47800 entries in 187 pages [ 0.126823] sched-energy: Sched-energy-costs installed from DT [ 0.126833] ASID allocator initialised with 65536 entries [ 0.161772] tegra-id: chipid=21817. [ 0.161777] tegra-id: opt_subrevision=1. [ 0.161795] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.161802] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.161808] DTB Build time: Feb 9 2023 22:54:45 [ 0.210663] CPU1: Booted secondary processor [4e0f0030] [ 0.242074] CPU2: Booted secondary processor [4e0f0030] [ 0.273085] CPU3: Booted secondary processor [411fd073] [ 0.305057] CPU4: Booted secondary processor [411fd073] [ 0.337049] CPU5: Booted secondary processor [411fd073] [ 0.337104] Brought up 6 CPUs [ 0.337108] SMP: Total of 6 processors activated. [ 0.337113] CPU features: detected feature: 32-bit EL0 Support [ 0.339219] CPU: All CPU(s) started at EL2 [ 0.339287] alternatives: patching kernel code [ 0.342035] devtmpfs: initialized [ 0.368565] Initilizing CustomIPI irq domain [ 0.368708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.368717] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.377157] pinctrl core: initialized pinctrl subsystem [ 0.377394] OS set in device tree is not L4T. [ 0.377598] regulator-dummy: no parameters [ 0.377740] Initializing plugin-manager [ 0.377796] Plugin module not found [ 0.377832] Plugin-manager status disabled [ 0.379133] NET: Registered protocol family 16 [ 0.380097] pstore: using zlib compression [ 0.380110] console [pstore-1] enabled [ 0.380113] pstore: Registered ramoops as persistent store backend [ 0.380117] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.393098] cpuidle: using governor menu [ 0.394208] bpmp: waiting for handshake [ 0.394212] bpmp: handshake completed [ 0.394225] bpmp: synchronizing channels [ 0.394241] bpmp: channels synchronized [ 0.394244] bpmp: mail init ok [ 0.395924] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.395929] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.395933] arm-smmu 12000000.iommu: stage 1 translation [ 0.395936] arm-smmu 12000000.iommu: stage 2 translation [ 0.395939] arm-smmu 12000000.iommu: nested translation [ 0.395946] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.395951] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.395955] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.395959] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.395963] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.397890] vdso: 2 pages (1 code @ ffffff8008fb7000, 1 data @ ffffff8009ee4000) [ 0.397903] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.400843] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.402107] Registering BPMP clocks... [ 0.402192] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.402743] Serial: AMBA PL011 UART driver [ 0.403866] tegra_powergate_init: DONE [ 0.403873] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.403879] DTB Build time: Feb 9 2023 22:54:45 [ 0.405339] Tegra reboot handler registered. [ 0.406573] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.406636] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.406648] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.406651] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.406653] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.406807] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.406818] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.407117] iommu: Adding device 3460000.sdhci to group 0 [ 0.407763] iommu: Adding device 3400000.sdhci to group 1 [ 0.408788] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.408799] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.409237] iommu: Adding device 3160000.i2c to group 3 [ 0.409643] iommu: Adding device c240000.i2c to group 4 [ 0.409958] iommu: Adding device 3180000.i2c to group 5 [ 0.410279] iommu: Adding device 3190000.i2c to group 6 [ 0.410673] iommu: Adding device 31b0000.i2c to group 7 [ 0.410984] iommu: Adding device 31c0000.i2c to group 8 [ 0.411293] iommu: Adding device c250000.i2c to group 9 [ 0.411598] iommu: Adding device 31e0000.i2c to group 10 [ 0.413039] iommu: Adding device 3210000.spi to group 11 [ 0.413377] iommu: Adding device c260000.spi to group 12 [ 0.413698] iommu: Adding device 3240000.spi to group 13 [ 0.414365] iommu: Adding device 3100000.serial to group 14 [ 0.414680] iommu: Adding device 3110000.serial to group 15 [ 0.414987] iommu: Adding device c280000.serial to group 16 [ 0.415293] iommu: Adding device 3130000.serial to group 17 [ 0.416532] iommu: Adding device 2490000.ether_qos to group 18 [ 0.416543] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.417416] iommu: Adding device b000000.rtcpu to group 19 [ 0.419396] iommu: Adding device 13e10000.host1x to group 20 [ 0.419688] iommu: Adding device 13e10000.host1x:ctx0 to group 21 [ 0.419988] iommu: Adding device 13e10000.host1x:ctx1 to group 22 [ 0.420277] iommu: Adding device 13e10000.host1x:ctx2 to group 23 [ 0.420561] iommu: Adding device 13e10000.host1x:ctx3 to group 24 [ 0.420858] iommu: Adding device 13e10000.host1x:ctx4 to group 25 [ 0.421198] iommu: Adding device 13e10000.host1x:ctx5 to group 26 [ 0.421491] iommu: Adding device 13e10000.host1x:ctx6 to group 27 [ 0.421776] iommu: Adding device 13e10000.host1x:ctx7 to group 28 [ 0.422218] iommu: Adding device 150c0000.nvcsi to group 29 [ 0.422809] iommu: Adding device 15700000.vi to group 30 [ 0.423131] iommu: Adding device 15600000.isp to group 31 [ 0.423342] iommu: Adding device 15200000.dc_common to group 32 [ 0.423435] platform 15200000.dc_common: OF IOVA linear map 0x96088000 size (0x800000) [ 0.423468] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x2008) [ 0.423930] iommu: Adding device 15210000.nvdisplay to group 33 [ 0.424260] iommu: Adding device 15220000.nvdisplay to group 34 [ 0.424601] iommu: Adding device 15340000.vic to group 35 [ 0.424813] iommu: Adding device 154c0000.nvenc to group 36 [ 0.425018] iommu: Adding device 15480000.nvdec to group 37 [ 0.425361] iommu: Adding device 15380000.nvjpg to group 38 [ 0.425566] iommu: Adding device 15500000.tsec to group 39 [ 0.425768] iommu: Adding device 15100000.tsecb to group 40 [ 0.426499] iommu: Adding device 15810000.se to group 41 [ 0.426707] iommu: Adding device 15820000.se to group 42 [ 0.426912] iommu: Adding device 15830000.se to group 43 [ 0.427113] iommu: Adding device 15840000.se to group 44 [ 0.427921] iommu: Adding device smmu_test to group 45 [ 0.428484] mc: mapped MMIO address: 0xffffff800a760000 -> 0x2c10000 [ 0.428495] mc: mapped MMIO address: 0xffffff800a780000 -> 0x2c20000 [ 0.428504] mc: mapped MMIO address: 0xffffff800a7a0000 -> 0x2c30000 [ 0.428514] mc: mapped MMIO address: 0xffffff800a7c0000 -> 0x2c40000 [ 0.428523] mc: mapped MMIO address: 0xffffff800a7e0000 -> 0x2c50000 [ 0.428531] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.428540] mc-err: mcerr ops are set to t18x [ 0.428674] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.429799] iommu: Adding device 3530000.xhci to group 46 [ 0.429811] arm-smmu: forcing sodev map for 3530000.xhci [ 0.430233] iommu: Adding device 3550000.xudc to group 47 [ 0.430244] arm-smmu: forcing sodev map for 3550000.xudc [ 0.430929] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.430936] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.430942] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.431537] iommu: Adding device 17000000.gp10b to group 48 [ 0.432539] tegra-reset 5000000.clock: registered 193 resets. [ 0.434587] iommu: Adding device d000000.bpmp to group 49 [ 0.434800] bpmp: ping status is 0 [ 0.434900] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.436891] bpmp d000000.bpmp: probe ok [ 0.439733] iommu: Adding device 2600000.dma to group 50 [ 0.440547] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.441034] GPIO line 461 (camera-control-output-high) hogged as output/high [ 0.441085] GPIO line 424 (wifi-enable) hogged as output/high [ 0.441116] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.441145] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.441296] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.444786] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.444898] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.445030] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.446638] iommu: Adding device 10003000.pcie-controller to group 51 [ 0.446652] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.446974] iommu: Adding device sound to group 52 [ 0.447305] iommu: Adding device 3510000.hda to group 53 [ 0.454591] iommu: Adding device c1a0000.aon to group 54 [ 0.455033] vdd-ac-bat: 5000 mV [ 0.456685] vdd-1v8-ap: 1800 mV [ 0.485514] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488156] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.488344] SCSI subsystem initialized [ 0.488444] libata version 3.00 loaded. [ 0.488656] usbcore: registered new interface driver usbfs [ 0.488687] usbcore: registered new interface driver hub [ 0.488713] usbcore: registered new device driver usb [ 0.490851] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.490881] pca953x 0-0077: TINY_2_regs failed reading register but guised [ 0.491054] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.491083] pca953x 0-0077: TINY_2_regs failed reading register but guised [ 0.491245] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.491274] pca953x 0-0077: TINY2 failed writing register [ 0.491453] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.491481] pca953x 0-0077: TINY1 failed writing register [ 0.491643] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.491671] pca953x 0-0077: TINY1 failed writing register [ 0.491681] GPIO line 244 (lcd-bias-rails) hogged as output/high [ 0.491831] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.492242] random: fast init done [ 0.501430] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.504771] vddio-ddr: at 1125 mV [ 0.508624] avdd_dsi_csi: 1200 mV [ 0.512623] vdd-1v8: 1800 mV [ 0.516624] vdd-3v3-sys: 3300 mV [ 0.517757] spmic-ldo0: at 1800 mV [ 0.518465] spmic-ldo1: at 800 mV [ 0.521072] vddio-3v3: 3300 mV [ 0.521802] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.525071] vdd-rtc: at 800 mV [ 0.525793] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.529073] spmic-ldo6: at 1500 mV [ 0.533069] vdd-pex-1v00: 1000 mV [ 0.533698] dvdd-pex: 1000 mV [ 0.535888] GPIO line 237 (spmic_gpio_input) hogged as input [ 0.536040] GPIO line 238 (spmic_gpio_input) hogged as input [ 0.536186] gpiochip_setup_dev: registered GPIOs 232 to 239 on device: gpiochip3 (max77620-gpio) [ 0.536369] max77620 4-003c: max77620 probe successful [ 0.536762] media: Linux media interface: v0.10 [ 0.536790] Linux video capture interface: v2.00 [ 0.539290] pps_core: LinuxPPS API ver. 1 registered [ 0.539293] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.539313] PTP clock support registered [ 0.539545] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.539736] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.539753] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.541033] trusty trusty: trusty version: Built: 09:23:15 Nov 22 2022 [ 0.541047] trusty trusty: selected api version: 3 (requested 3) [ 0.541809] Advanced Linux Sound Architecture Driver Initialized. [ 0.542121] Bluetooth: Core ver 2.22 [ 0.542147] NET: Registered protocol family 31 [ 0.542149] Bluetooth: HCI device and connection manager initialized [ 0.542155] Bluetooth: HCI socket layer initialized [ 0.542162] Bluetooth: L2CAP socket layer initialized [ 0.542175] Bluetooth: SCO socket layer initialized [ 0.542860] en-vdd-sd: 3300 mV [ 0.543080] en-vdd-cam: 1800 mV [ 0.543272] vdd-hdmi: 5000 mV [ 0.543547] vdd-usb0-5v: 5000 mV [ 0.543813] vdd-usb1-5v: 5000 mV [ 0.544010] en-vdd-ts-1v8: 1800 mV [ 0.544214] en-vdd-ts-hv-3v3: 3300 mV [ 0.544432] en-vdd-disp-3v3: 3300 mV [ 0.544678] en-mdm-pwr-3v7: 3700 mV [ 0.544896] en-vdd-disp-1v8: 1800 mV [ 0.545116] en-vdd-cam-hv-2v8: 2800 mV [ 0.545342] en-vdd-cam-1v2: 1200 mV [ 0.545574] vdd-fan: 5000 mV [ 0.545798] vdd-3v3: 3300 mV [ 0.546025] dis-vdd-1v2: 1200 mV [ 0.546259] en-vdd-vcm-2v8: 2800 mV [ 0.546498] vdd-usb2-5v: 5000 mV [ 0.546737] vdd-sys-bl: 3300 mV [ 0.546995] en-vdd-sys: 1200 mV [ 0.548826] camchar: rtcpu character device driver loaded [ 0.549314] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.551035] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:2 [ 0.551984] clocksource: Switched to clocksource arch_sys_counter [ 0.573779] VFS: Disk quotas dquot_6.6.0 [ 0.573851] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.574086] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.574568] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.574673] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.574676] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.574684] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.574689] nvmap_page_pool_init: Total RAM pages: 2005864 [ 0.574692] nvmap_page_pool_init: nvmap page pool size: 250733 pages (979 MB) [ 0.574745] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.575215] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.577165] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.582559] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.582761] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.583134] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.583205] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.583307] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.583406] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.583552] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.583741] la/ptsa driver initialized. [ 0.583750] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.583752] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.584067] NET: Registered protocol family 2 [ 0.584133] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.586754] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.587058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.587649] TCP: Hash tables configured (established 65536 bind 65536) [ 0.587700] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.587814] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.588160] NET: Registered protocol family 1 [ 0.588487] RPC: Registered named UNIX socket transport module. [ 0.588489] RPC: Registered udp transport module. [ 0.588491] RPC: Registered tcp transport module. [ 0.588494] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.588499] PCI: CLS 0 bytes, default 64 [ 0.588610] Trying to unpack rootfs image as initramfs... [ 0.795695] Freeing initrd memory: 7068K [ 0.810576] host1x 13e10000.host1x: initialized [ 0.811973] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.814044] audit: initializing netlink subsys (disabled) [ 0.814069] audit: type=2000 audit(0.700:1): initialized [ 0.814450] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.820850] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.821798] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.822297] 9p: Installing v9fs 9p2000 file system support [ 0.824327] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.824393] io scheduler noop registered [ 0.824600] io scheduler cfq registered (default) [ 0.827683] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.839826] iommu: Adding device aconnect@2a41000:adsp_audio to group 55 [ 0.843527] iommu: Adding device 2993000.adsp to group 56 [ 0.843625] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.846257] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 0.849862] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.850969] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.852022] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.853040] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.855229] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 0.856156] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.856490] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 0.856524] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.856638] misc tegra_camera_ctrl: tegra_camera_isomgr_register: some fields not in DT. [ 0.856644] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=0, vi_iso_bw=5625000, max_bw=5625000 [ 0.858714] tegra-pcie 10003000.pcie-controller: probing port 1, using 0 lanes [ 0.859118] tsec 15500000.tsec: initialized [ 0.860423] tsec 15100000.tsecb: initialized [ 0.862984] nvdec 15480000.nvdec: initialized [ 0.867598] falcon 15340000.vic: initialized [ 0.868901] falcon 154c0000.nvenc: initialized [ 0.870215] falcon 15380000.nvjpg: initialized [ 0.871998] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.873346] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.874636] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.875952] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.877241] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.878518] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.879792] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.881173] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.884231] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.884239] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.884266] tegradccommon 15200000.dc_common: dma mapping done [ 0.884417] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=392 [ 0.884485] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 0.884684] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 0.884769] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 0.884783] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 0.884824] generic_infoframe_type: 0x87 [ 0.884840] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 0.884844] tegra_cec 3960000.tegra_cec: probed [ 0.884910] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.884930] tegradc 15210000.nvdisplay: Display dc.ffffff800af10000 registered with id=0 [ 0.892325] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.892329] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.892332] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.892533] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 0.892538] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 0.893168] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: dc_hdmi_hotplug_init of of_dc.c TINYY.. ,0 [ 0.893627] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.895981] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.895985] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.898567] tegradc 15210000.nvdisplay: probed [ 0.899117] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.899810] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.899836] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.900365] kfuse 3830000.kfuse: initialized [ 0.901683] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.904498] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.906767] console [ttyS0] disabled [ 0.906804] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 0.946541] console [ttyS0] enabled [ 0.946844] Console: switching to colour frame buffer device 240x67 [ 0.946930] tegradc 15210000.nvdisplay: fb registered [ 0.947127] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.947695] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 0.947814] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 0.948087] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 0.948128] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 0.955695] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 0.956027] serial-tegra 3130000.serial: RX in PIO mode [ 0.956053] Parent Clock set for DC plld2 [ 0.957023] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 0.958117] [drm] Initialized [ 0.965046] brd: module loaded [ 0.968330] loop: module loaded [ 0.968376] tegra_profiler: version: 1.145, samples/io: 49/28 [ 0.968446] tegra_profiler: auth: init [ 0.968785] nct1008_nct72 7-004c: starting parse dt [ 0.968885] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 0.968890] nct1008_nct72 7-004c: success parsing dt [ 0.968998] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 0.969350] THERMAL EST: found 3 subdevs [ 0.969354] THERMAL EST num_resources: 0 [ 0.969357] [THERMAL EST subdev 0] [ 0.969362] [THERMAL EST subdev 1] [ 0.969366] [THERMAL EST subdev 2] [ 0.969627] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 0.969630] THERMAL EST: thz register success. [ 0.969720] THERMAL EST: end of probe, return err: 0 [ 0.970429] sd: No Scsi addr parsed to reserve index [ 0.970452] hisi_sas: driver version v1.6 [ 0.973961] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 0.973969] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 0.974708] scsi host0: tegra_ahci [ 0.975086] scsi host1: tegra_ahci [ 0.975223] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 0.975226] ata2: DUMMY [ 0.981209] tun: Universal TUN/TAP device driver, 1.6 [ 0.981213] tun: (C) 1999-2004 Max Krasnyansky [ 0.981358] vcan: Virtual CAN interface driver [ 0.981362] slcan: serial line CAN interface driver [ 0.981365] slcan: 10 dynamic interface channels. [ 0.981370] CAN device driver interface [ 0.981451] usbcore: registered new interface driver ems_usb [ 0.981480] usbcore: registered new interface driver esd_usb2 [ 0.981507] usbcore: registered new interface driver gs_usb [ 0.981534] usbcore: registered new interface driver kvaser_usb [ 0.981561] usbcore: registered new interface driver peak_usb [ 0.981586] usbcore: registered new interface driver usb_8dev [ 0.981741] cc770: CAN netdevice driver [ 0.984370] Message RAM Configuration | base addr |0x0c312000| | sidfc_flssa |0x00000000| | xidfc_flesa |0x00000040| | rxf0c_f0sa |0x000000c0| | rxf1c_f1sa |0x000009c0| | rxbc_rbsa |0x000009c0| | txefc_efsa |0x000009c0| | txbc_tbsa |0x00000a40| | tmc_tmsa |0x00000ec0| [ 0.984544] Release 3.2.0 from 19.12.2014 [ 0.984549] CAN register access PASS Endian Reg 0x87654321 [ 0.984861] net can0: mttcan device registered (regs=ffffff800a73c000, irq=389) [ 0.986277] Message RAM Configuration | base addr |0x0c322000| | sidfc_flssa |0x00000000| | xidfc_flesa |0x00000040| | rxf0c_f0sa |0x000000c0| | rxf1c_f1sa |0x000009c0| | rxbc_rbsa |0x000009c0| | txefc_efsa |0x000009c0| | txbc_tbsa |0x00000a40| | tmc_tmsa |0x00000ec0| [ 0.986451] Release 3.2.0 from 19.12.2014 [ 0.986455] CAN register access PASS Endian Reg 0x87654321 [ 0.986732] net can1: mttcan device registered (regs=ffffff800a77c000, irq=390) [ 0.987490] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.987493] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.987526] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.987529] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.987558] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.987560] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.987590] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 0.987592] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 0.996025] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 0.998430] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 0.998918] eqos_get_mac_address_dtb: bad mac address at /chosen/nvidia,ether-mac: null. [ 1.007046] eqos 2490000.ether_qos (unnamed net_device) (uninitialized): ether-mac read from DT failed -99 [ 1.009456] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.009919] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.009927] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.016721] eqos 2490000.ether_qos (unnamed net_device) (uninitialized): EQOS using random MAC address: 1a:70:1d:60:af:8f [ 1.016746] Using phyrst_lpmode = 0 from DT [ 1.017096] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.019033] PPP generic driver version 2.4.2 [ 1.019152] PPP BSD Compression module registered [ 1.019155] PPP Deflate Compression module registered [ 1.019169] PPP MPPE Compression module registered [ 1.019173] NET: Registered protocol family 24 [ 1.019213] usbcore: registered new interface driver r8152 [ 1.019243] usbcore: registered new interface driver asix [ 1.019271] usbcore: registered new interface driver ax88179_178a [ 1.019298] usbcore: registered new interface driver cdc_ether [ 1.019324] usbcore: registered new interface driver net1080 [ 1.019350] usbcore: registered new interface driver cdc_subset [ 1.019376] usbcore: registered new interface driver zaurus [ 1.019409] usbcore: registered new interface driver cdc_ncm [ 1.019511] VFIO - User Level meta-driver version: 0.3 [ 1.020446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.020458] ehci-pci: EHCI PCI platform driver [ 1.020490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.020496] ohci-pci: OHCI PCI platform driver [ 1.020525] ohci-platform: OHCI generic platform driver [ 1.024774] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.026413] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb3a2400 id [ 1.027085] ./driver/usb/storage/uas.c: uas_probex1...TINYY [ 1.027199] usbcore: registered new interface driver uas [ 1.027239] usbcore: registered new interface driver usb-storage [ 1.027311] usbcore: registered new interface driver usbserial [ 1.027973] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.031136] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.032266] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.032284] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.033093] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.033299] mousedev: PS/2 mouse device common for all mice [ 1.033350] usbcore: registered new interface driver xpad [ 1.036089] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.036092] Extcon AUX1(HDMI) enable [ 1.036501] tegradc 15220000.nvdisplay: disp1 connected to head2->/host1x/sor [ 1.036538] generic_infoframe_type: 0x87 [ 1.036608] tegradc 15220000.nvdisplay: DT parsed successfully [ 1.036630] tegradc 15220000.nvdisplay: Display dc.ffffff800ba90000 registered with id=1 [ 1.036880] tegradc 15220000.nvdisplay: vblank syncpt # 11 for dc 2 [ 1.036885] tegradc 15220000.nvdisplay: vpulse3 syncpt # 12 for dc 2 [ 1.037415] tegradc 15220000.nvdisplay: dc_hdmi_hotplug_init: dc_hdmi_hotplug_init of of_dc.c TINYY.. ,0 [ 1.047011] tegradc 15220000.nvdisplay: tegra_dpaux_init_data: /host1x/dpaux@155c0000 present but disabled [ 1.055968] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.055983] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.056678] tegradc 15220000.nvdisplay: Error: out->type:1 out_ops->init() failed. err=-19 [ 1.056707] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.056738] tegra-xusb 3530000.xhci: irq 72, io mem 0x03530000 [ 1.056873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.056877] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.056880] usb usb1: Product: xHCI Host Controller [ 1.056883] usb usb1: Manufacturer: Linux 4.9.299+ xhci-hcd [ 1.056885] usb usb1: SerialNumber: 3530000.xhci [ 1.057209] hub 1-0:1.0: USB hub found [ 1.057236] hub 1-0:1.0: 4 ports detected [ 1.057566] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.057574] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.057699] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.057702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.057705] usb usb2: Product: xHCI Host Controller [ 1.057707] usb usb2: Manufacturer: Linux 4.9.299+ xhci-hcd [ 1.057710] usb usb2: SerialNumber: 3530000.xhci [ 1.057999] hub 2-0:1.0: USB hub found [ 1.058022] hub 2-0:1.0: 3 ports detected [ 1.058454] Wake76 for irq=199 [ 1.058456] Wake77 for irq=199 [ 1.058457] Wake78 for irq=199 [ 1.058459] Wake79 for irq=199 [ 1.058460] Wake80 for irq=199 [ 1.058461] Wake81 for irq=199 [ 1.058462] Wake82 for irq=199 [ 1.058486] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.058490] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.064975] tegradc 15220000.nvdisplay: failed to initialize DC out ops [ 1.080048] usb usb1: usb_suspend_both: status 0 [ 1.080113] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:2 [ 1.160112] usb usb2: usb_suspend_both: status 0 [ 1.165331] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.166500] Wake73 for irq=42 [ 1.167737] rtc rtc1: alarm rtc device [ 1.167749] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.167765] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.167972] i2c /dev entries driver [ 1.169296] pca954x 2-0070: vcc-pullup regulator not found [ 1.169306] pca954x 2-0070: pca954x_probe: forcing device bus number, start 30. [ 1.169310] pca954x 2-0070: device detect skipped. [ 1.169758] i2c i2c-2: Added multiplexed i2c bus 30 [ 1.170117] i2c i2c-2: Added multiplexed i2c bus 31 [ 1.170464] i2c i2c-2: Added multiplexed i2c bus 32 [ 1.170617] i2c i2c-2: Added multiplexed i2c bus 33 [ 1.170764] i2c i2c-2: Added multiplexed i2c bus 34 [ 1.170934] i2c i2c-2: Added multiplexed i2c bus 35 [ 1.171089] i2c i2c-2: Added multiplexed i2c bus 36 [ 1.171280] i2c i2c-2: Added multiplexed i2c bus 37 [ 1.171285] pca954x 2-0070: registered 8 multiplexed busses for I2C switch pca9548 [ 1.171394] i2c-ds90ub954 30-0030: ds90ub954_probe: start [ 1.171398] i2c-ds90ub954 30-0030: ds90ub954_parse_dt: deserializer: [ 1.171403] i2c-ds90ub954 30-0030: pass-gpio not found, ignoring [ 1.171406] i2c-ds90ub954 30-0030: lock-gpio not found, ignoring [ 1.171409] i2c-ds90ub954 30-0030: pdb-gpio not found, ignoring [ 1.171414] i2c-ds90ub954 30-0030: ds90ub954_parse_dt: - csi-lane-count 4 [ 1.171418] i2c-ds90ub954 30-0030: ds90ub954_parse_dt: - csi-lane-speed 800 [ 1.171422] i2c-ds90ub954 30-0030: ds90ub954_parse_dt: - test-pattern disabled [ 1.171426] i2c-ds90ub954 30-0030: ds90ub954_parse_dt: - discontinuous clock used [ 1.171453] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: parsing serializers device tree: [ 1.171458] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - serializer rx-channel: 0 [ 1.171463] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: -test-pattern disabled [ 1.171467] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - csi-lane-count 2 [ 1.171470] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found [ 1.171474] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0 [ 1.171477] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found [ 1.171480] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0 [ 1.171484] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found [ 1.171487] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0 [ 1.171490] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found [ 1.171494] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0 [ 1.171497] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio0-control property not found [ 1.171500] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000 [ 1.171504] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio1-control property not found [ 1.171507] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000 [ 1.171510] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio2-control property not found [ 1.171513] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000 [ 1.171516] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio3-control property not found [ 1.171519] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000 [ 1.171523] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - hs-clk-div property not found [ 1.171526] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4) [ 1.171529] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - div-m-val property not found [ 1.171532] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1 [ 1.171535] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - div-n-val property not found [ 1.171539] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28 [ 1.171542] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - i2c-address: 0x19 [ 1.171611] i2c-ds90ub954 30-0030: ds90ub953_i2c_client init client done [ 1.171629] i2c-ds90ub954 30-0030: ds90ub953_regmap_init init regmap done [ 1.171662] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - num of slave alias pairs: 1 [ 1.171666] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - slave addr: 0x3B, alias addr: 0x3B [ 1.171669] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - continuous clock enabled [ 1.171673] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - i2c-pass-through-all disabled [ 1.171677] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - virtual-channel-map 0x0 [ 1.171680] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: serializer 0 successfully parsed [ 1.171684] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - serializer rx-channel: 1 [ 1.171688] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: -test-pattern disabled [ 1.171691] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - csi-lane-count 2 [ 1.171694] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found [ 1.171698] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0 [ 1.171701] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found [ 1.171704] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0 [ 1.171707] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found [ 1.171710] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0 [ 1.171713] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found [ 1.171716] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0 [ 1.171719] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio0-control property not found [ 1.171722] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000 [ 1.171725] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio1-control property not found [ 1.171728] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000 [ 1.171731] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio2-control property not found [ 1.171734] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000 [ 1.171737] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - gpio3-control property not found [ 1.171740] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000 [ 1.171743] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - hs-clk-div property not found [ 1.171746] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4) [ 1.171749] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - div-m-val property not found [ 1.171752] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1 [ 1.171755] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - div-n-val property not found [ 1.171758] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28 [ 1.171761] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - i2c-address: 0x20 [ 1.171791] tegradc 15210000.nvdisplay: blank - powerdown [ 1.171825] i2c-ds90ub954 30-0030: ds90ub953_i2c_client init client done [ 1.171843] i2c-ds90ub954 30-0030: ds90ub953_regmap_init init regmap done [ 1.171864] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - num of slave alias pairs: 1 [ 1.171867] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - slave addr: 0x3B, alias addr: 0x3C [ 1.171869] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - continuous clock enabled [ 1.171872] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - i2c-pass-through-all disabled [ 1.171875] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: - virtual-channel-map 0x1 [ 1.171877] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: serializer 1 successfully parsed [ 1.171880] i2c-ds90ub954 30-0030: ds90ub953_parse_dt: done [ 1.183958] i2c-ds90ub954 30-0030: ds90ub954_init starting [ 1.184586] tegra-i2c 3180000.i2c: no acknowledge from address 0x30 [ 1.184861] i2c-ds90ub954 30-0030: Cannot read register 0x00 (-121)! [ 1.184864] i2c-ds90ub954 30-0030: ds90ub954_probe: error initializing ds90ub954 [ 1.185016] i2c-ds90ub954: probe of 30-0030 failed with error -121 [ 1.185051] i2c-ds90ub954 31-0030: ds90ub954_probe: start [ 1.185054] i2c-ds90ub954 31-0030: ds90ub954_parse_dt: deserializer: [ 1.185057] i2c-ds90ub954 31-0030: pass-gpio not found, ignoring [ 1.185060] i2c-ds90ub954 31-0030: lock-gpio not found, ignoring [ 1.185063] i2c-ds90ub954 31-0030: pdb-gpio not found, ignoring [ 1.185066] i2c-ds90ub954 31-0030: ds90ub954_parse_dt: - csi-lane-count 4 [ 1.185069] i2c-ds90ub954 31-0030: ds90ub954_parse_dt: - csi-lane-speed 800 [ 1.185072] i2c-ds90ub954 31-0030: ds90ub954_parse_dt: - test-pattern disabled [ 1.185075] i2c-ds90ub954 31-0030: ds90ub954_parse_dt: - discontinuous clock used [ 1.185098] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: parsing serializers device tree: [ 1.185102] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - serializer rx-channel: 0 [ 1.185106] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: -test-pattern disabled [ 1.185109] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - csi-lane-count 2 [ 1.185111] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found [ 1.185114] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0 [ 1.185117] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found [ 1.185119] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0 [ 1.185121] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found [ 1.185124] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0 [ 1.185127] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found [ 1.185129] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0 [ 1.185131] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio0-control property not found [ 1.185134] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000 [ 1.185137] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio1-control property not found [ 1.185139] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000 [ 1.185142] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio2-control property not found [ 1.185144] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000 [ 1.185146] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio3-control property not found [ 1.185148] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000 [ 1.185151] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - hs-clk-div property not found [ 1.185153] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4) [ 1.185156] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - div-m-val property not found [ 1.185158] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1 [ 1.185161] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - div-n-val property not found [ 1.185163] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28 [ 1.185166] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - i2c-address: 0x19 [ 1.185229] i2c-ds90ub954 31-0030: ds90ub953_i2c_client init client done [ 1.185256] i2c-ds90ub954 31-0030: ds90ub953_regmap_init init regmap done [ 1.185281] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - num of slave alias pairs: 1 [ 1.185283] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - slave addr: 0x3B, alias addr: 0x3B [ 1.185286] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - continuous clock enabled [ 1.185289] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - i2c-pass-through-all disabled [ 1.185292] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - virtual-channel-map 0x0 [ 1.185294] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: serializer 0 successfully parsed [ 1.185298] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - serializer rx-channel: 1 [ 1.185301] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: -test-pattern disabled [ 1.185304] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - csi-lane-count 2 [ 1.185306] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found [ 1.185308] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0 [ 1.185311] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found [ 1.185313] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0 [ 1.185315] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found [ 1.185317] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0 [ 1.185320] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found [ 1.185322] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0 [ 1.185324] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio0-control property not found [ 1.185326] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000 [ 1.185329] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio1-control property not found [ 1.185331] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000 [ 1.185333] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio2-control property not found [ 1.185335] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000 [ 1.185337] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - gpio3-control property not found [ 1.185339] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000 [ 1.185342] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - hs-clk-div property not found [ 1.185344] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4) [ 1.185346] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - div-m-val property not found [ 1.185349] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1 [ 1.185351] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - div-n-val property not found [ 1.185353] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28 [ 1.185356] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - i2c-address: 0x20 [ 1.185412] i2c-ds90ub954 31-0030: ds90ub953_i2c_client init client done [ 1.185426] i2c-ds90ub954 31-0030: ds90ub953_regmap_init init regmap done [ 1.185445] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - num of slave alias pairs: 1 [ 1.185448] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - slave addr: 0x3B, alias addr: 0x3C [ 1.185451] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - continuous clock enabled [ 1.185453] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - i2c-pass-through-all disabled [ 1.185456] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: - virtual-channel-map 0x1 [ 1.185458] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: serializer 1 successfully parsed [ 1.185461] i2c-ds90ub954 31-0030: ds90ub953_parse_dt: done [ 1.203951] i2c-ds90ub954 31-0030: ds90ub954_init starting [ 1.204378] tegra-i2c 3180000.i2c: no acknowledge from address 0x30 [ 1.204652] i2c-ds90ub954 31-0030: Cannot read register 0x00 (-121)! [ 1.204655] i2c-ds90ub954 31-0030: ds90ub954_probe: error initializing ds90ub954 [ 1.204789] i2c-ds90ub954: probe of 31-0030 failed with error -121 [ 1.204823] i2c-ds90ub954 32-0030: ds90ub954_probe: start [ 1.204826] i2c-ds90ub954 32-0030: ds90ub954_parse_dt: deserializer: [ 1.204830] i2c-ds90ub954 32-0030: pass-gpio not found, ignoring [ 1.204832] i2c-ds90ub954 32-0030: lock-gpio not found, ignoring [ 1.204835] i2c-ds90ub954 32-0030: pdb-gpio not found, ignoring [ 1.204838] i2c-ds90ub954 32-0030: ds90ub954_parse_dt: - csi-lane-count 4 [ 1.204841] i2c-ds90ub954 32-0030: ds90ub954_parse_dt: - csi-lane-speed 800 [ 1.204844] i2c-ds90ub954 32-0030: ds90ub954_parse_dt: - test-pattern disabled [ 1.204846] i2c-ds90ub954 32-0030: ds90ub954_parse_dt: - discontinuous clock used [ 1.204870] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: parsing serializers device tree: [ 1.204874] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - serializer rx-channel: 0 [ 1.204877] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: -test-pattern disabled [ 1.204880] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - csi-lane-count 2 [ 1.204883] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found [ 1.204885] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0 [ 1.204888] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found [ 1.204890] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0 [ 1.204893] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found [ 1.204895] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0 [ 1.204897] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found [ 1.204899] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0 [ 1.204902] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio0-control property not found [ 1.204904] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000 [ 1.204906] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio1-control property not found [ 1.204908] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000 [ 1.204911] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio2-control property not found [ 1.204913] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000 [ 1.204915] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio3-control property not found [ 1.204917] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000 [ 1.204920] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - hs-clk-div property not found [ 1.204922] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4) [ 1.204924] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - div-m-val property not found [ 1.204927] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1 [ 1.204929] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - div-n-val property not found [ 1.204931] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28 [ 1.204934] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - i2c-address: 0x19 [ 1.204996] i2c-ds90ub954 32-0030: ds90ub953_i2c_client init client done [ 1.205023] i2c-ds90ub954 32-0030: ds90ub953_regmap_init init regmap done [ 1.205053] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - num of slave alias pairs: 1 [ 1.205056] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - slave addr: 0x3B, alias addr: 0x3B [ 1.205059] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - continuous clock enabled [ 1.205062] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - i2c-pass-through-all disabled [ 1.205065] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - virtual-channel-map 0x0 [ 1.205068] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: serializer 0 successfully parsed [ 1.205072] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - serializer rx-channel: 1 [ 1.205074] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: -test-pattern disabled [ 1.205077] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - csi-lane-count 2 [ 1.205079] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio0-output-enable property not found [ 1.205081] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio0-output-enable to default val: 0 [ 1.205084] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio1-output-enable property not found [ 1.205086] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio1-output-enable to default val: 0 [ 1.205088] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio2-output-enable property not found [ 1.205090] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio2-output-enable to default val: 0 [ 1.205093] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio3-output-enable property not found [ 1.205095] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio3-output-enable to default val: 0 [ 1.205097] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio0-control property not found [ 1.205099] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio0-control to default val: 0b1000 [ 1.205102] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio1-control property not found [ 1.205104] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio1-control to default val: 0b1000 [ 1.205106] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio2-control property not found [ 1.205108] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio2-control to default val: 0b1000 [ 1.205110] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - gpio3-control property not found [ 1.205112] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: gpio3-control to default val: 0b1000 [ 1.205115] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - hs-clk-div property not found [ 1.205117] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - hs-clk-div set to default val: 0x2 (div by 4) [ 1.205119] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - div-m-val property not found [ 1.205121] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - div-m-val set to default val: 1 [ 1.205124] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - div-n-val property not found [ 1.205126] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - div-n-val set to default val: 0x28 [ 1.205128] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - i2c-address: 0x20 [ 1.205184] i2c-ds90ub954 32-0030: ds90ub953_i2c_client init client done [ 1.205200] i2c-ds90ub954 32-0030: ds90ub953_regmap_init init regmap done [ 1.205221] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - num of slave alias pairs: 1 [ 1.205224] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - slave addr: 0x3B, alias addr: 0x3C [ 1.205226] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - continuous clock enabled [ 1.205229] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - i2c-pass-through-all disabled [ 1.205232] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: - virtual-channel-map 0x1 [ 1.205234] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: serializer 1 successfully parsed [ 1.205237] i2c-ds90ub954 32-0030: ds90ub953_parse_dt: done [ 1.209779] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.209781] Extcon AUX1(HDMI) disable [ 1.219946] i2c-ds90ub954 32-0030: ds90ub954_init starting [ 1.220375] tegra-i2c 3180000.i2c: no acknowledge from address 0x30 [ 1.220654] i2c-ds90ub954 32-0030: Cannot read register 0x00 (-121)! [ 1.220657] i2c-ds90ub954 32-0030: ds90ub954_probe: error initializing ds90ub954 [ 1.220791] i2c-ds90ub954: probe of 32-0030 failed with error -121 [ 1.222403] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.227392] parse_throttle_dt_data: Num cap clks = 4 [ 1.227396] parse_throttle_dt_data: clk=mcpu type=1 [ 1.227398] parse_throttle_dt_data: clk=bcpu type=2 [ 1.227403] parse_throttle_dt_data: clk=gpu type=4 [ 1.227406] parse_throttle_dt_data: clk=emc type=3 [ 1.228446] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.229010] FAN dev name: pwm-fan [ 1.229069] FAN:gpio request success. [ 1.229077] FAN: can't find tach_gpio [ 1.229096] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.229274] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 1.229278] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.229873] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.229877] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.229881] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.229884] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.229888] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.229891] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.229894] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.229897] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.229900] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.229903] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.230469] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.231442] device-mapper: uevent: version 1.0.3 [ 1.231847] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.232146] CPU EMC frequency mapping table: from device tree [ 1.237466] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.238894] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.242556] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.256077] cpufreq: platform driver Initialization: pass [ 1.256674] tegradc 15210000.nvdisplay: unblank [ 1.256712] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.256830] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.257249] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.257344] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.257422] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.257618] sdhci: Secure Digital Host Controller Interface driver [ 1.257619] sdhci: Copyright(c) Pierre Ossman [ 1.257620] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.258581] Parent Clock set for DC plld2 [ 1.261022] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.262309] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.262927] CMDQ: cmdq_platfm_init successful [ 1.263716] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.263956] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.264417] CQE: CMD_TIMING bit set for R1B DCMD [ 1.265950] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.265996] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.266576] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.268218] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 259 [ 1.273006] tegra-se-nvhost 15810000.se: initialized [ 1.274098] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.274654] tegra-se-nvhost 15820000.se: initialized [ 1.275575] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.276143] tegra-se-nvhost 15830000.se: initialized [ 1.276892] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.277406] tegra-se-nvhost 15840000.se: initialized [ 1.278261] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.278970] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.279102] hidraw: raw HID events driver (C) Jiri Kosina [ 1.280365] usbcore: registered new interface driver usbhid [ 1.280366] usbhid: USB HID core driver [ 1.282345] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 1.282374] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.282485] ina3221x: probe of 0-0042 failed with error -121 [ 1.282717] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 1.282743] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 1.282835] ina3221x: probe of 0-0043 failed with error -121 [ 1.285247] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.287433] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.287649] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.287764] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.287982] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.288065] tegra186-cam-rtcpu b000000.rtcpu: no priority specified, using 99 as default [ 1.288723] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.288795] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.288839] tegra-capture-ivc ivc-b000000.rtcpu:ivccontrol@52c0: no priority specified, using 99 as default [ 1.288889] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.288932] tegra-capture-ivc ivc-b000000.rtcpu:ivccapture@72c0: no priority specified, using 99 as default [ 1.288975] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.289073] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.289367] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 1.289369] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.289855] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.290649] ata1: SATA link down (SStatus 0 SControl 300) [ 1.291432] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.291863] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.292321] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.292601] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.293304] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293306] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 1.293308] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.293355] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293357] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 1.293359] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.293404] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293405] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 1.293407] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.293451] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293452] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 1.293454] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.293498] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293500] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 1.293502] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.293550] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293554] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 1.293556] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.293600] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293604] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 1.293606] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.293652] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293656] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 1.293658] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.293700] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293704] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 1.293706] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.293749] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293751] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 1.293753] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.293797] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293801] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 1.293803] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.293847] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293851] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 1.293853] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.293896] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293901] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 1.293903] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.293956] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.293960] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 1.293962] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.294007] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 1.294011] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 1.294012] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.294072] **** A57 ECC: Enabled [ 1.294074] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 1.294134] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.294565] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.294998] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.295123] denver_knobs_init:MTS_VERSION:61650191 [ 1.299034] nvpmodel: initialized successfully [ 1.299439] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.299440] Extcon AUX1(HDMI) enable [ 1.300064] trusty-virtio trusty:virtio: initializing [ 1.300173] trusty_ipc virtio0: vring0: va(pa) ffffffc1e66f2000(0) qsz 32 notifyid 1 [ 1.300178] trusty_ipc virtio0: vring1: va(pa) ffffffc1e5238000(0) qsz 32 notifyid 2 [ 1.300239] trusty-virtio trusty:virtio: initializing done [ 1.300327] trusty_ipc virtio0: is online [ 1.301249] usbcore: registered new interface driver snd-usb-audio [ 1.307964] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.312165] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.313845] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 1.320158] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.320225] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.325520] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.325638] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.327722] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.336947] OPE platform probe [ 1.337019] OPE platform probe successful [ 1.391630] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.391657] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.391674] Extcon HDMI: HPD enabled [ 1.391692] tegradc 15210000.nvdisplay: hdmi: plugged [ 1.406509] mmc0: periodic cache flush enabled [ 1.406520] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.410909] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 1.411013] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 1.415157] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 1.419281] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 1.424002] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.437976] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.438057] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.438138] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.438207] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.438279] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.438345] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.438413] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.438488] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.438557] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.438623] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.438692] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.438760] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.438829] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.438895] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.438962] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.439031] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.439101] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.439170] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.439238] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.439303] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.458848] u32 classifier [ 1.458850] Actions configured [ 1.458910] Initializing XFRM netlink socket [ 1.459445] NET: Registered protocol family 10 [ 1.460033] NET: Registered protocol family 17 [ 1.460045] NET: Registered protocol family 15 [ 1.460104] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.460106] can: controller area network core (rev 20120528 abi 9) [ 1.460168] NET: Registered protocol family 29 [ 1.460182] can: raw protocol (rev 20120528) [ 1.460185] can: broadcast manager protocol (rev 20161123 t) [ 1.460189] can: netlink gateway (rev 20130117) max_hops=1 [ 1.460333] Bluetooth: RFCOMM socket layer initialized [ 1.460341] Bluetooth: RFCOMM ver 1.11 [ 1.460345] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.460349] Bluetooth: HIDP socket layer initialized [ 1.460363] 9pnet: Installing 9P2000 support [ 1.460399] Key type dns_resolver registered [ 1.460736] Registered cp15_barrier emulation handler [ 1.460750] Registered setend emulation handler [ 1.461648] registered taskstats version 1 [ 1.464574] isp 15600000.isp: initialized [ 1.468428] nvcsi 150c0000.nvcsi: initialized [ 1.469537] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.472118] Wake83 for irq=51 [ 1.472196] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.472275] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.472350] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.472477] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.473817] tegra-vi4 15700000.vi: initialized [ 1.474691] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--6 bound [ 1.474757] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--5 bound [ 1.474818] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--4 bound [ 1.474875] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--3 bound [ 1.474931] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 1.474991] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.505024] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:07:48 UTC (946688868) [ 1.505955] mmcblk mmc0:0001: Card claimed for testing. [ 1.534107] bpmp: mounted debugfs mirror [ 1.535050] bwmgr: missing cdev-type property [ 1.540919] ALSA device list: [ 1.540923] #0: tegra-hda at 0x3518000 irq 385 [ 1.540925] #1: tegra-snd-t186ref-mobile-rt565x [ 1.610252] mmc1: Applying tuning correction [ 1.610265] mmc1: Tap value after applying correction 61 [ 1.610271] mmc1: hw tuning done ... [ 1.614184] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 1.743985] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.903961] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 1.968481] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 1.968485] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.146050] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.148075] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.548114] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 2.950170] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 3.059962] tegra-xusb 3530000.xhci: entering ELPG [ 3.063214] tegra-xusb 3530000.xhci: entering ELPG done [ 3.350225] tegra-pcie 10003000.pcie-controller: link 1 down, retrying [ 3.352246] tegra-pcie 10003000.pcie-controller: link 1 down, ignoring [ 3.556419] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.556694] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 11.087960] tegra-i2c c250000.i2c: pio timed out addr: 0x4c tlen:16 rlen:0 [ 11.094899] tegra-i2c c250000.i2c: --- register dump for debugging ---- [ 11.101542] tegra-i2c c250000.i2c: I2C_CNFG - 0x22c00 [ 11.106614] tegra-i2c c250000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 11.113252] tegra-i2c c250000.i2c: I2C_FIFO_CONTROL - 0xe0 [ 11.118759] tegra-i2c c250000.i2c: I2C_FIFO_STATUS - 0x800070 [ 11.124527] tegra-i2c c250000.i2c: I2C_INT_MASK - 0x7c [ 11.129687] tegra-i2c c250000.i2c: I2C_INT_STATUS - 0x0 [ 11.134889] random: crng init done [ 11.134934] tegra-i2c c250000.i2c: i2c transfer timed out addr: 0x4c [ 11.141349] nct1008_nct72 7-004c: write reg err -110 [ 11.146333] nct1008_nct72 7-004c: sensor init failed 0xffffff92 [ 11.152274] nct1008_nct72 7-004c: exit nct1008_probe, err=-110 [ 11.159781] nct1008_nct72 7-004c: success in disabling tmp451 VDD rail [ 11.159794] nct1008_nct72: probe of 7-004c failed with error -110 [ 11.162248] Freeing unused kernel memory: 8704K [ 11.183129] Root device found: mmcblk0p1 [ 11.184242] Found dev node: /dev/mmcblk0p1 [ 11.203806] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 11.205595] Rootfs mounted over mmcblk0p1 [ 11.220669] Switching from initrd to actual rootfs [ 11.300013] systemd[1]: System time before build time, advancing clock. [ 11.322914] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.331745] cgroup: cgroup2: unknown option "nsdelegate" [ 11.343905] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 11.344693] systemd[1]: Detected architecture arm64. [ 11.362787] systemd[1]: No hostname configured. [ 11.362798] systemd[1]: Set hostname to . [ 11.443209] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 11.443217] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 11.553519] systemd[1]: Created slice System Slice. [ 11.553788] systemd[1]: Listening on udev Control Socket. [ 11.553956] systemd[1]: Listening on Journal Socket. [ 11.556092] systemd[1]: Mounting Kernel Debug File System... [ 11.605807] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 11.870842] systemd-journald[2352]: Received request to flush runtime journal from PID 1 [ 12.353244] using random self ethernet address [ 12.358008] using random host ethernet address [ 12.697321] Mass Storage Function, version: 2009/09/11 [ 12.697326] LUN: removable file: (no medium) [ 12.702133] using random self ethernet address [ 12.707866] using random host ethernet address [ 12.760788] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 12.774209] rndis0: HOST MAC 1a:da:05:a7:b3:ec [ 12.774262] rndis0: MAC 1a:da:05:a7:b3:ed [ 12.774617] usb0: HOST MAC 1a:da:05:a7:b3:ee [ 12.774637] usb0: MAC 1a:da:05:a7:b3:ef [ 12.774651] tegra-xudc-new 3550000.xudc: exiting ELPG [ 12.776572] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 12.776590] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 12.776616] tegra-xudc-new 3550000.xudc: entering ELPG [ 12.777924] tegra-xudc-new 3550000.xudc: entering ELPG done [ 12.777940] tegra-xudc-new 3550000.xudc: exiting ELPG [ 12.779649] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 12.779664] tegra-xudc-new 3550000.xudc: entering ELPG [ 12.781024] tegra-xudc-new 3550000.xudc: entering ELPG done [ 12.781460] l4tbr0: port 1(rndis0) entered blocking state [ 12.781464] l4tbr0: port 1(rndis0) entered disabled state [ 12.781587] device rndis0 entered promiscuous mode [ 12.786865] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 12.796994] l4tbr0: port 2(usb0) entered blocking state [ 12.796998] l4tbr0: port 2(usb0) entered disabled state [ 12.797206] device usb0 entered promiscuous mode [ 12.805723] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 12.936497] dhd_module_init in [ 12.936593] found wifi platform device bcmdhd_wlan [ 12.937714] wifi_platform_get_country_code_map: could not get country_code_map [ 12.937718] wifi_plat_dev_drv_probe:platform country code map is not available [ 12.937733] Power-up adapter 'DHD generic adapter' [ 12.937740] wifi_platform_set_power = 1 [ 13.143983] wifi_platform_bus_enumerate device present 1 [ 13.164718] wifi_platform_bus_enumerate device present 0 [ 13.169924] F1 signature read @0x18000000=0x17214354 [ 13.182644] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 13.183445] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 13.183686] wifi_platform_get_mac_addr [ 13.183803] wifi_get_mac_address_dtb: bad mac address at /chosen/nvidia,wifi-mac: null. [ 13.183820] wifi_get_mac_addr_file: cannot open /mnt/vendor/factory/wifi/wifi_mac.txt [ 13.189657] ids dhd_log_netlink_init [ 13.191780] wl_event_handler : [ 13.191786] tsk Enter, tsk = 0xffffffc1de6c1a90 [ 13.191792] wl_create_event_handler(): thread:wl_event_handler:1208 started [ 13.196068] dhd_attach(): thread:dhd_watchdog_thread:120a started [ 13.200579] dhd_attach(): thread:dhd_dpc:120b started [ 13.204211] dhd_attach(): thread:dhd_rxf:1212 started [ 13.204221] dhd_deferred_work_init: work queue initialized [ 13.208781] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 13.209164] Register interface [wlan0] MAC: 00:90:4c:11:22:33 [ 13.209169] dhd_prot_ioctl : bus is down. we have nothing to do [ 13.218707] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 61 [ 13.219795] wifi_platform_set_power = 0 [ 17.469729] Please complete system configuration setup on desktop to proceed... [ 17.838120] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.916755] gpio tegra-gpio wake18 for gpio=101(M:5) [ 17.921179] net eth0: get_configure_l3v4_filter --> [ 17.921584] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.934234] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.934347] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 17.934356] wl_android_wifi_on in [ 17.934360] wifi_platform_set_power = 1 [ 18.288352] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 61 [ 18.288876] F1 signature read @0x18000000=0x17214354 [ 18.293137] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 18.293757] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 18.362581] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 18.426994] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 18.427251] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 18.427312] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 18.427314] Enabling wake69 [ 18.428066] wifi_platform_get_mac_addr [ 18.428188] wifi_get_mac_address_dtb: bad mac address at /chosen/nvidia,wifi-mac: null. [ 18.428197] wifi_get_mac_addr_file: cannot open /mnt/vendor/factory/wifi/wifi_mac.txt [ 18.430040] Firmware up: op_mode=0x0005, MAC=00:90:4c:16:70:01 [ 18.434178] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 18.434210] Skipping the clm download. len:0 memblk: (null) [ 18.436384] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 18.441092] Firmware version = wl0: Jul 21 2020 16:35:45 version 7.35.349.94 (r726700 CY) FWID 01-aa356e32 [ 18.443311] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 18.600901] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 18.600905] P2P interface registered [ 18.609704] WLC_E_IF: NO_IF set, event Ignored [ 18.618540] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.139199] tegradc 15210000.nvdisplay: unblank [ 24.284301] fuse init (API version 7.26) [ 24.951348] tegradc 15210000.nvdisplay: unblank [ 31.824124] spmic-ldo0: disabling [ 31.824320] spmic-ldo1: disabling [ 31.824469] en-vdd-sd: disabling [ 31.824473] vdd-usb0-5v: disabling [ 31.824475] vdd-usb1-5v: disabling [ 31.824480] vdd-3v3: disabling [ 31.824483] en-vdd-vcm-2v8: disabling [ 31.824485] vdd-sys-bl: disabling [ 33.731851] tegra-xusb 3530000.xhci: exiting ELPG [ 33.735646] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 33.863968] tegra-xusb 3530000.xhci: exiting ELPG done [ 34.183966] usb 1-1: new high-speed USB device number 2 using tegra-xusb [ 34.204381] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 [ 34.204386] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 34.204389] usb 1-1: Product: USB2.0 HUB [ 34.205852] hub 1-1:1.0: USB hub found [ 34.206306] hub 1-1:1.0: 4 ports detected [ 34.491972] usb 1-1.2: new full-speed USB device number 3 using tegra-xusb [ 34.516115] usb 1-1.2: New USB device found, idVendor=040b, idProduct=a087 [ 34.516122] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 34.516127] usb 1-1.2: Product: Holdchip Gaming Keyboard [ 34.516131] usb 1-1.2: Manufacturer: Holdchip Technology Inc [ 34.542551] input: Holdchip Technology Inc Holdchip Gaming Keyboard as /devices/3530000.xhci/usb1/1-1/1-1.2/1-1.2:1.0/0003:040B:A087.0001/input/input3 [ 34.600362] hid-generic 0003:040B:A087.0001: input,hidraw0: USB HID v1.10 Keyboard [Holdchip Technology Inc Holdchip Gaming Keyboard] on usb-3530000.xhci-1.2/input0 [ 34.606357] input: Holdchip Technology Inc Holdchip Gaming Keyboard as /devices/3530000.xhci/usb1/1-1/1-1.2/1-1.2:1.1/0003:040B:A087.0002/input/input4 [ 34.664121] hid-generic 0003:040B:A087.0002: input,hidraw1: USB HID v1.10 Keyboard [Holdchip Technology Inc Holdchip Gaming Keyboard] on usb-3530000.xhci-1.2/input1 [ 34.743954] usb 1-1.3: new low-speed USB device number 4 using tegra-xusb [ 34.770489] usb 1-1.3: New USB device found, idVendor=04b4, idProduct=0060 [ 34.770496] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 34.770501] usb 1-1.3: Product: USB Device [ 34.770506] usb 1-1.3: Manufacturer: Areson [ 34.774917] input: Areson USB Device as /devices/3530000.xhci/usb1/1-1/1-1.3/1-1.3:1.0/0003:04B4:0060.0003/input/input5 [ 34.775154] hid-generic 0003:04B4:0060.0003: input,hidraw2: USB HID v1.00 Mouse [Areson USB Device] on usb-3530000.xhci-1.3/input0 [ 34.777917] hid-generic 0003:04B4:0060.0004: hidraw3: USB HID v1.00 Device [Areson USB Device] on usb-3530000.xhci-1.3/input1 [ 90.472087] [12-10 09:17:08.172] wl_cfg80211_connect: Connectting with 08:5d:dd:ed:c7:72 channel (44) ssid "SK_WiFiGIGAC770_5G", len (18) [ 90.577159] [12-10 09:17:08.277] wl_notify_connect_status: wl_bss_connect_done succeeded with 08:5d:dd:ed:c7:72 [ 90.577430] [12-10 09:17:08.277] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M1 of 4way [ 90.593745] wl_bss_connect_done : [ 90.593748] Report connect result - connection succeeded [ 90.594503] [12-10 09:17:08.294] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M2 of 4way [ 90.596173] [12-10 09:17:08.296] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M3 of 4way [ 90.596334] [12-10 09:17:08.296] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M4 of 4way [ 90.614869] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 90.624876] [12-10 09:17:08.324] wl_notify_connect_status: wl_bss_connect_done succeeded with 08:5d:dd:ed:c7:72 [ 90.639018] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23 [ 90.639031] dhd_inet6_work_handler: Adding host ip for NDO failed -23 [ 90.676302] ifidx:0 DHCP - DISCOVER [TX] [ 90.783389] ifidx:0 DHCP - OFFER [RX] [ 90.783666] ifidx:0 DHCP - REQUEST [TX] [ 90.790293] ifidx:0 DHCP - ACK [RX] [ 272.742806] tegradc 15210000.nvdisplay: blank - powerdown [ 272.797283] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 272.797286] Extcon AUX1(HDMI) disable [ 272.818944] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 272.819022] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 272.819491] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 272.826921] tegradc 15210000.nvdisplay: blank - powerdown [ 272.826941] tegradc 15210000.nvdisplay: unblank [ 272.827527] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 272.827612] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 272.827688] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 272.828940] Parent Clock set for DC plld2 [ 272.832178] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 272.833410] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 272.868574] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 272.868576] Extcon AUX1(HDMI) enable [ 272.883543] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 276.099595] Bridge firewalling registered [ 276.140935] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 276.686650] Netfilter messages via NETLINK v0.30. [ 276.691371] ctnetlink v0.93: registering with nfnetlink. [ 276.932606] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 279.208204] CPU1: shutdown [ 279.217836] psci: CPU1 killed (polled 0 ms) [ 279.276255] CPU2: shutdown [ 279.280918] psci: CPU2 killed (polled 0 ms) [ 279.478420] zram: Added device: zram0 [ 279.481523] zram: Added device: zram1 [ 279.482182] zram: Added device: zram2 [ 279.484382] zram: Added device: zram3 [ 279.542821] zram0: detected capacity change from 0 to 1029021696 [ 279.574016] Adding 1004900k swap on /dev/zram0. Priority:5 extents:1 across:1004900k SS [ 279.578517] zram1: detected capacity change from 0 to 1029021696 [ 279.588170] Adding 1004900k swap on /dev/zram1. Priority:5 extents:1 across:1004900k SS [ 279.599221] zram2: detected capacity change from 0 to 1029021696 [ 279.615049] Adding 1004900k swap on /dev/zram2. Priority:5 extents:1 across:1004900k SS [ 279.641566] zram3: detected capacity change from 0 to 1029021696 [ 279.653516] Adding 1004900k swap on /dev/zram3. Priority:5 extents:1 across:1004900k SS [ 281.976298] tegra-xudc-new 3550000.xudc: exiting ELPG [ 281.976329] android_work: did not send uevent (0 0 (null)) [ 281.977583] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 281.977624] tegra-xudc-new 3550000.xudc: ep 0 disabled [ 281.978664] tegra-xudc-new 3550000.xudc: entering ELPG [ 281.979841] tegra-xudc-new 3550000.xudc: entering ELPG done [ 281.990642] device usb0 left promiscuous mode [ 281.990648] l4tbr0: port 2(usb0) entered disabled state [ 282.006528] tegradc 15210000.nvdisplay: unblank [ 282.052538] device rndis0 left promiscuous mode [ 282.052545] l4tbr0: port 1(rndis0) entered disabled state [ 284.419187] using random self ethernet address [ 284.423954] using random host ethernet address [ 284.677617] Mass Storage Function, version: 2009/09/11 [ 284.677624] LUN: removable file: (no medium) [ 284.682279] using random self ethernet address [ 284.686842] using random host ethernet address [ 284.705467] rndis0: HOST MAC 1a:da:05:a7:b3:ec [ 284.705706] rndis0: MAC 1a:da:05:a7:b3:ed [ 284.710346] usb0: HOST MAC 1a:da:05:a7:b3:ee [ 284.710384] usb0: MAC 1a:da:05:a7:b3:ef [ 284.710403] tegra-xudc-new 3550000.xudc: exiting ELPG [ 284.712062] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 284.712082] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 284.712112] tegra-xudc-new 3550000.xudc: entering ELPG [ 284.713002] tegra-xudc-new 3550000.xudc: entering ELPG done [ 284.713017] tegra-xudc-new 3550000.xudc: exiting ELPG [ 284.714292] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 284.714308] tegra-xudc-new 3550000.xudc: entering ELPG [ 284.715127] tegra-xudc-new 3550000.xudc: entering ELPG done [ 284.718948] l4tbr0: port 1(rndis0) entered blocking state [ 284.718953] l4tbr0: port 1(rndis0) entered disabled state [ 284.722347] device rndis0 entered promiscuous mode [ 284.731893] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 284.743084] l4tbr0: port 2(usb0) entered blocking state [ 284.743088] l4tbr0: port 2(usb0) entered disabled state [ 284.743653] device usb0 entered promiscuous mode [ 284.748950] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 286.609606] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 286.609618] Bluetooth: BNEP socket layer initialized [ 287.065004] tegradc 15210000.nvdisplay: unblank [ 290.390271] tegra-i2c c250000.i2c: pio timed out addr: 0x50 tlen:28 rlen:4 [ 290.397173] tegra-i2c c250000.i2c: --- register dump for debugging ---- [ 290.407125] tegra-i2c c250000.i2c: I2C_CNFG - 0x22c00 [ 290.413212] tegra-i2c c250000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 290.420066] tegra-i2c c250000.i2c: I2C_FIFO_CONTROL - 0xe0 [ 290.426297] tegra-i2c c250000.i2c: I2C_FIFO_STATUS - 0x800040 [ 290.433391] tegra-i2c c250000.i2c: I2C_INT_MASK - 0x7d [ 290.440825] tegra-i2c c250000.i2c: I2C_INT_STATUS - 0x0 [ 290.446996] tegra-i2c c250000.i2c: i2c transfer timed out addr: 0x50 [ 332.091550] ifidx:264 DHCP - 0x0 [RX] [ 721.644798] tegradc 15210000.nvdisplay: blank - powerdown [ 721.700487] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 721.700489] Extcon AUX1(HDMI) disable [ 721.724288] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 721.724372] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 721.724861] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 772.857584] tegradc 15210000.nvdisplay: unblank [ 772.858778] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 772.858994] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 772.859157] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 772.867675] Parent Clock set for DC plld2 [ 772.873030] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 772.876613] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 772.917820] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 772.917827] Extcon AUX1(HDMI) enable [ 772.952826] tegradc 15210000.nvdisplay: unblank [ 1849.150689] ifidx:0 DHCP - DISCOVER [TX] [ 1851.979260] ifidx:0 DHCP - DISCOVER [TX] [ 1851.989531] ifidx:0 DHCP - OFFER [RX] [ 1851.989991] ifidx:0 DHCP - REQUEST [TX] [ 1851.997180] ifidx:0 DHCP - OFFER [RX] [ 1852.004157] ifidx:0 DHCP - ACK [RX] [ 2089.455312] usb 1-1.1: new high-speed USB device number 5 using tegra-xusb [ 2089.493933] usb 1-1.1: New USB device found, idVendor=090c, idProduct=1000 [ 2089.493957] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2089.493972] usb 1-1.1: Product: USB DISK [ 2089.493987] usb 1-1.1: Manufacturer: SMI [ 2089.494000] usb 1-1.1: SerialNumber: CCYYMMDDHHmmSSGRBZE2 [ 2089.497669] ./driver/usb/storage/uas.c: uas_probe...TINYY1 [ 2089.497676] ./driver/usb/storage/uas.c: uas_probe1...TINYY [ 2089.497704] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 2089.499146] usb-storage 1-1.1:1.0: Quirks match for vid 090c pid 1000: 400 [ 2089.499184] scsi host2: usb-storage 1-1.1:1.0 [ 2090.718607] scsi 2:0:0:0: Direct-Access SMI USB DISK 1100 PQ: 0 ANSI: 4 [ 2090.728370] sd 2:0:0:0: [sda] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 2090.737674] sd 2:0:0:0: [sda] Write Protect is off [ 2090.742506] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 2090.743510] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2090.763960] sda: sda1 [ 2090.767667] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 2091.235123] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 2112.530782] usb 1-1.1: USB disconnect, device number 5 [ 2112.545849] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 2112.551089] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00 [ 2418.819703] tegradc 15210000.nvdisplay: blank - powerdown [ 2418.879090] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 2418.879092] Extcon AUX1(HDMI) disable [ 2418.904244] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 2418.904321] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 2418.904794] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 2429.219740] tegradc 15210000.nvdisplay: unblank [ 2429.220734] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 2429.220912] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 2429.221054] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 2429.228165] Parent Clock set for DC plld2 [ 2429.236955] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 2429.238447] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 2429.279894] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 2429.279901] Extcon AUX1(HDMI) enable [ 2429.290748] tegradc 15210000.nvdisplay: unblank [ 2740.260931] tegradc 15210000.nvdisplay: blank - powerdown [ 2740.324568] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 2740.324573] Extcon AUX1(HDMI) disable [ 2740.346864] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 2740.346995] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 2740.347756] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 3512.673468] ifidx:0 DHCP - REQUEST [TX] [ 3512.697291] ifidx:0 DHCP - ACK [RX] [ 3828.580767] nr_pdflush_threads exported in /proc is scheduled for removal [ 4590.006769] tegradc 15210000.nvdisplay: unblank [ 4590.007987] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4590.008213] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4590.008382] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4590.016872] Parent Clock set for DC plld2 [ 4590.022421] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 4590.024007] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4590.063029] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4590.063035] Extcon AUX1(HDMI) enable [ 4590.100731] tegradc 15210000.nvdisplay: unblank [ 5289.897162] ifidx:0 DHCP - REQUEST [TX] [ 5289.911291] ifidx:0 DHCP - ACK [RX]