user@user:~/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra$ sudo ./flash.sh -r -d kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb -K kernel/Image jetson-tx2 mmcblk0p1 ############################################################################### # L4T BSP Information: # R28 (release), REVISION: 2.1, GCID: 11272647, BOARD: t186ref, EABI: aarch64, # DATE: Thu May 17 07:29:06 UTC 2018 ############################################################################### # Target Board Information: # Name: jetson-tx2, Board Family: t186ref, SoC: Tegra 186, # OpMode: production, Boot Authentication: , ############################################################################### ./tegraflash.py --chip 0x18 --applet "/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mb1_recovery_prod.bin" --cmd "dump eeprom boardinfo cvm.bin" --skipuid Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0256 ] Generating RCM messages [ 0.0312 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x18 --download rcm /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mb1_recovery_prod.bin 0 0 [ 0.0330 ] RCM 0 is saved as rcm_0.rcm [ 0.0712 ] RCM 1 is saved as rcm_1.rcm [ 0.0713 ] List of rcm files are saved in rcm_list.xml [ 0.0713 ] [ 0.0713 ] Signing RCM messages [ 0.0994 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key [ 0.1017 ] Assuming zero filled SBK key [ 0.1276 ] [ 0.1277 ] Copying signature to RCM mesages [ 0.1299 ] tegrarcm_v2 --chip 0x18 --updatesig rcm_list_signed.xml [ 0.1323 ] [ 0.1324 ] Boot Rom communication [ 0.1339 ] tegrarcm_v2 --chip 0x18 --rcm rcm_list_signed.xml --skipuid [ 0.1352 ] RCM version 0X180001 [ 0.2623 ] Boot Rom communication completed [ 1.2692 ] [ 1.2715 ] tegrarcm_v2 --isapplet [ 1.2735 ] Applet version 01.00.0000 [ 1.5411 ] [ 1.5434 ] Retrieving EEPROM data [ 1.5437 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/cvm.bin [ 1.5482 ] Applet version 01.00.0000 [ 1.7603 ] Saved platform info in /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/cvm.bin [ 1.8431 ] Board ID(3310) version(B02) copying bctfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg)... done. copying misc_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-misc-si-l4t.cfg)... done. copying pinmux_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg)... done. copying pmic_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg)... done. copying pmc_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg)... done. copying prod_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg)... done. copying scr_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/minimal_scr.cfg)... done. copying scr_cold_boot_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/mobile_scr.cfg)... done. copying bootrom_config(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg)... done. copying dev_params(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/BCT/emmc.cfg)... done. Existing bootloader(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/nvtboot_cpu.bin) reused. Making Boot image... done. Existing sosfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mb1_recovery_prod.bin) reused. copying tegraboot(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/nvtboot.bin)... done. Existing mb2blfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/nvtboot_recovery.bin) reused. Existing mtspreboot(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/preboot_d15_prod_cr.bin) reused. Existing mts(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mce_mts_d15_prod_cr.bin) reused. Existing mb1file(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/mb1_prod.bin) reused. Existing bpffile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/bpmp.bin) reused. copying bpfdtbfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb)... done. Existing scefile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/camera-rtcpu-sce.bin) reused. Existing spefile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/spe.bin) reused. copying wb0boot(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/warmboot.bin)... done. Existing tosfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/tos.img) reused. Existing eksfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/eks.img) reused. copying dtbfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb)... done. Reusing existing system.img... done. Existing tbcfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/cboot.bin) reused. copying tbcdtbfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/kernel/dtb/tegra186-quill-p3310-1000-c03-00-base.dtb)... done. copying cfgfile(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/t186ref/cfg/flash_l4t_t186.xml) to flash.xml... done. Existing flasher(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/nvtboot_recovery_cpu.bin) reused. Existing flashapp(/home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/tegraflash.py) reused. ./tegraflash.py --bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x7090000 --applet mb1_recovery_prod.bin --cmd "flash; reboot" --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --scr_cold_boot_config mobile_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb; tlk tos.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb" saving flash command in /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/flashcmd.txt ./tegraflash.py --bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x7090000 --applet mb1_recovery_prod.bin --cmd "flash; reboot" --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --scr_cold_boot_config mobile_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb; tlk tos.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb" copying boot image (boot.img.sb)... done. copying partition layout (flash.xml.sb)... done. copying kernel dtb (tegra186-quill-p3310-1000-c03-00-base.dtb.sb)... done. saving flash parameters in /home/user/JetPack-L4T-3.2.1/64_TX2/Linux_for_Tegra/bootloader/flash_parameters.txt --bl nvtboot_recovery_cpu.bin --sdram_config P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --odmdata 0x7090000 --applet mb1_recovery_prod.bin --cmd "flash; reboot" --cfg flash.xml --chip 0x18 --misc_config tegra186-mb1-bct-misc-si-l4t.cfg --pinmux_config tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmic_config tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --pmc_config tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --prod_config tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg --scr_config minimal_scr.cfg --scr_cold_boot_config mobile_scr.cfg --br_cmd_config tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --dev_params emmc.cfg --bins "mb2_bootloader nvtboot_recovery.bin; mts_preboot preboot_d15_prod_cr.bin; mts_bootpack mce_mts_d15_prod_cr.bin; bpmp_fw bpmp.bin; bpmp_fw_dtb tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb; tlk tos.img; eks eks.img; bootloader_dtb tegra186-quill-p3310-1000-c03-00-base.dtb" *** Flashing target device started. *** Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0016 ] tegrasign_v2 --key None --getmode mode.txt [ 0.0031 ] Assuming zero filled SBK key [ 0.0033 ] [ 0.0033 ] Generating RCM messages [ 0.0048 ] tegrarcm_v2 --listrcm rcm_list.xml --chip 0x18 --download rcm mb1_recovery_prod.bin 0 0 [ 0.0063 ] RCM 0 is saved as rcm_0.rcm [ 0.0069 ] RCM 1 is saved as rcm_1.rcm [ 0.0069 ] List of rcm files are saved in rcm_list.xml [ 0.0069 ] [ 0.0069 ] Signing RCM messages [ 0.0084 ] tegrasign_v2 --key None --list rcm_list.xml --pubkeyhash pub_key.key [ 0.0099 ] Assuming zero filled SBK key [ 0.0162 ] [ 0.0162 ] Copying signature to RCM mesages [ 0.0173 ] tegrarcm_v2 --chip 0x18 --updatesig rcm_list_signed.xml [ 0.0185 ] [ 0.0186 ] Parsing partition layout [ 0.0501 ] tegraparser_v2 --pt flash.xml.tmp [ 0.0829 ] [ 0.0830 ] Creating list of images to be signed [ 0.1011 ] tegrahost_v2 --chip 0x18 --partitionlayout flash.xml.bin --list images_list.xml zerosbk [ 0.5603 ] [ 0.5604 ] Generating signatures [ 0.5628 ] tegrasign_v2 --key None --list images_list.xml --pubkeyhash pub_key.key [ 0.5649 ] Assuming zero filled SBK key [ 2.3362 ] [ 2.3363 ] Generating br-bct [ 2.4020 ] Updating dev and MSS params in BR BCT [ 2.4022 ] tegrabct_v2 --dev_param emmc.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --brbct br_bct.cfg --chip 0x18 [ 2.4444 ] [ 2.4445 ] Updating bl info [ 2.4457 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml [ 2.4476 ] [ 2.4477 ] Updating smd info [ 2.4487 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatesmdinfo flash.xml.bin [ 2.4507 ] [ 2.4507 ] Updating Odmdata [ 2.4518 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatefields Odmdata =0x7090000 [ 2.4539 ] [ 2.4539 ] Get Signed section bct [ 2.4549 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --listbct bct_list.xml [ 2.4568 ] [ 2.4568 ] Signing BCT [ 2.4589 ] tegrasign_v2 --key None --list bct_list.xml --pubkeyhash pub_key.key [ 2.4600 ] Assuming zero filled SBK key [ 2.4605 ] [ 2.4605 ] Updating BCT with signature [ 2.4620 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x18 --updatesig bct_list_signed.xml [ 2.4640 ] [ 2.4641 ] Generating coldboot mb1-bct [ 2.4656 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --misc tegra186-mb1-bct-misc-si-l4t.cfg --scr mobile_scr.cfg --pinmux tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmc tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --pmic tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --brcommand tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --prod tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg [ 2.4667 ] MB1-BCT version: 0xe [ 2.4670 ] Copying Sdram info from 2 to 3 set [ 2.4895 ] Packing sdram param for instance[0] [ 2.4898 ] Packing sdram param for instance[1] [ 2.4902 ] Packing sdram param for instance[2] [ 2.4905 ] Packing sdram param for instance[3] [ 2.4909 ] Parsing config file :tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg [ 2.4916 ] Appending platform config data of size :- 2904 [ 2.4921 ] Parsing config file :mobile_scr.cfg [ 2.4925 ] Appending platform config data of size :- 12240 [ 2.4931 ] Parsing config file :tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg [ 2.4936 ] Appending platform config data of size :- 24 [ 2.4936 ] [ 2.4936 ] Parsing config file :tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg [ 2.4937 ] Appending platform config data of size :- 708 [ 2.4937 ] [ 2.4937 ] Parsing config file :tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg [ 2.4937 ] Appending platform config data of size :- 64 [ 2.4937 ] [ 2.4937 ] Parsing config file :tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg [ 2.4938 ] Appending platform config data of size :- 1652 [ 2.4938 ] [ 2.4938 ] Updating mb1-bct with firmware information [ 2.4951 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo flash.xml.bin [ 2.4960 ] MB1-BCT version: 0xe [ 2.4967 ] [ 2.4967 ] Updating mb1-bct with storage information [ 2.4980 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_cold_boot_bct_MB1.bct --updatestorageinfo flash.xml.bin [ 2.4992 ] MB1-BCT version: 0xe [ 2.4999 ] [ 2.5009 ] tegrahost_v2 --align mb1_cold_boot_bct_MB1.bct [ 2.5018 ] [ 2.5026 ] tegrahost_v2 --appendsigheader mb1_cold_boot_bct_MB1.bct zerosbk [ 2.5037 ] [ 2.5050 ] tegrasign_v2 --key None --list mb1_cold_boot_bct_MB1_sigheader.bct_list.xml [ 2.5060 ] Assuming zero filled SBK key [ 2.5079 ] [ 2.5093 ] tegrahost_v2 --updatesigheader mb1_cold_boot_bct_MB1_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_sigheader.bct.hash zerosbk [ 2.5105 ] [ 2.5106 ] Generating recovery mb1-bct [ 2.5116 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct.cfg --sdram P3310_A00_8GB_Samsung_8GB_lpddr4_204Mhz_A02_l4t.cfg --misc tegra186-mb1-bct-misc-si-l4t.cfg --scr minimal_scr.cfg --pinmux tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg --pmc tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg --pmic tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg --brcommand tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg --prod tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg [ 2.5127 ] MB1-BCT version: 0xe [ 2.5131 ] Copying Sdram info from 2 to 3 set [ 2.5372 ] Packing sdram param for instance[0] [ 2.5376 ] Packing sdram param for instance[1] [ 2.5380 ] Packing sdram param for instance[2] [ 2.5383 ] Packing sdram param for instance[3] [ 2.5387 ] Parsing config file :tegra186-mb1-bct-pinmux-quill-p3310-1000-c03.cfg [ 2.5395 ] Appending platform config data of size :- 2904 [ 2.5399 ] Parsing config file :minimal_scr.cfg [ 2.5403 ] Appending platform config data of size :- 12240 [ 2.5409 ] Parsing config file :tegra186-mb1-bct-pad-quill-p3310-1000-c03.cfg [ 2.5413 ] Appending platform config data of size :- 24 [ 2.5414 ] [ 2.5414 ] Parsing config file :tegra186-mb1-bct-pmic-quill-p3310-1000-c04.cfg [ 2.5414 ] Appending platform config data of size :- 708 [ 2.5414 ] [ 2.5414 ] Parsing config file :tegra186-mb1-bct-bootrom-quill-p3310-1000-c03.cfg [ 2.5414 ] Appending platform config data of size :- 64 [ 2.5414 ] [ 2.5414 ] Parsing config file :tegra186-mb1-bct-prod-quill-p3310-1000-c03.cfg [ 2.5415 ] Appending platform config data of size :- 1652 [ 2.5415 ] [ 2.5415 ] Updating mb1-bct with firmware information [ 2.5427 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct_MB1.bct --updatefwinfo flash.xml.bin [ 2.5438 ] MB1-BCT version: 0xe [ 2.5444 ] [ 2.5445 ] Updating mb1-bct with storage information [ 2.5457 ] tegrabct_v2 --chip 0x18 --mb1bct mb1_bct_MB1.bct --updatestorageinfo flash.xml.bin [ 2.5466 ] MB1-BCT version: 0xe [ 2.5473 ] [ 2.5482 ] tegrahost_v2 --align mb1_bct_MB1.bct [ 2.5493 ] [ 2.5503 ] tegrahost_v2 --appendsigheader mb1_bct_MB1.bct zerosbk [ 2.5515 ] [ 2.5529 ] tegrasign_v2 --key None --list mb1_bct_MB1_sigheader.bct_list.xml [ 2.5540 ] Assuming zero filled SBK key [ 2.5567 ] [ 2.5583 ] tegrahost_v2 --updatesigheader mb1_bct_MB1_sigheader.bct.encrypt mb1_bct_MB1_sigheader.bct.hash zerosbk [ 2.5597 ] [ 2.5598 ] Copying signatures [ 2.5614 ] tegrahost_v2 --chip 0x18 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml [ 3.3747 ] [ 3.3748 ] Boot Rom communication [ 3.3762 ] tegrarcm_v2 --chip 0x18 --rcm rcm_list_signed.xml [ 3.3780 ] BootRom is not running [ 4.5313 ] [ 4.5336 ] tegrarcm_v2 --isapplet [ 4.5355 ] Applet version 01.00.0000 [ 4.8060 ] [ 4.8061 ] Retrieving board information [ 4.8085 ] tegrarcm_v2 --oem platformdetails chip chip_info.bin [ 4.8105 ] Applet version 01.00.0000 [ 5.0951 ] Saved platform info in chip_info.bin [ 5.0971 ] Chip minor revision: 2 [ 5.0983 ] [ 5.0984 ] Sending BCTs [ 5.1007 ] tegrarcm_v2 --download bct_bootrom br_bct_BR.bct --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [ 5.1029 ] Applet version 01.00.0000 [ 5.3705 ] Sending bct_bootrom [ 5.3710 ] [................................................] 100% [ 5.3813 ] Sending bct_mb1 [ 5.3877 ] [................................................] 100% [ 5.7360 ] [ 5.7361 ] Generating blob [ 5.7386 ] tegrahost_v2 --align blob_nvtboot_recovery_cpu.bin [ 5.7407 ] [ 5.7427 ] tegrahost_v2 --appendsigheader blob_nvtboot_recovery_cpu.bin zerosbk [ 5.7456 ] [ 5.7485 ] tegrasign_v2 --key None --list blob_nvtboot_recovery_cpu_sigheader.bin_list.xml [ 5.7507 ] Assuming zero filled SBK key [ 5.7616 ] [ 5.7639 ] tegrahost_v2 --updatesigheader blob_nvtboot_recovery_cpu_sigheader.bin.encrypt blob_nvtboot_recovery_cpu_sigheader.bin.hash zerosbk [ 5.7657 ] [ 5.7671 ] tegrahost_v2 --align blob_nvtboot_recovery.bin [ 5.7683 ] [ 5.7695 ] tegrahost_v2 --appendsigheader blob_nvtboot_recovery.bin zerosbk [ 5.7711 ] [ 5.7726 ] tegrasign_v2 --key None --list blob_nvtboot_recovery_sigheader.bin_list.xml [ 5.7737 ] Assuming zero filled SBK key [ 5.7766 ] [ 5.7781 ] tegrahost_v2 --updatesigheader blob_nvtboot_recovery_sigheader.bin.encrypt blob_nvtboot_recovery_sigheader.bin.hash zerosbk [ 5.7794 ] [ 5.7806 ] tegrahost_v2 --align blob_preboot_d15_prod_cr.bin [ 5.7816 ] [ 5.7826 ] tegrahost_v2 --appendsigheader blob_preboot_d15_prod_cr.bin zerosbk [ 5.7838 ] [ 5.7851 ] tegrasign_v2 --key None --list blob_preboot_d15_prod_cr_sigheader.bin_list.xml [ 5.7860 ] Assuming zero filled SBK key [ 5.7883 ] [ 5.7898 ] tegrahost_v2 --updatesigheader blob_preboot_d15_prod_cr_sigheader.bin.encrypt blob_preboot_d15_prod_cr_sigheader.bin.hash zerosbk [ 5.7910 ] [ 5.7923 ] tegrahost_v2 --align blob_mce_mts_d15_prod_cr.bin [ 5.7933 ] [ 5.7943 ] tegrahost_v2 --appendsigheader blob_mce_mts_d15_prod_cr.bin zerosbk [ 5.7996 ] [ 5.8012 ] tegrasign_v2 --key None --list blob_mce_mts_d15_prod_cr_sigheader.bin_list.xml [ 5.8022 ] Assuming zero filled SBK key [ 5.8638 ] [ 5.8653 ] tegrahost_v2 --updatesigheader blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt blob_mce_mts_d15_prod_cr_sigheader.bin.hash zerosbk [ 5.8692 ] [ 5.8706 ] tegrahost_v2 --align blob_bpmp.bin [ 5.8717 ] [ 5.8728 ] tegrahost_v2 --appendsigheader blob_bpmp.bin zerosbk [ 5.8750 ] [ 5.8768 ] tegrasign_v2 --key None --list blob_bpmp_sigheader.bin_list.xml [ 5.8784 ] Assuming zero filled SBK key [ 5.8994 ] [ 5.9011 ] tegrahost_v2 --updatesigheader blob_bpmp_sigheader.bin.encrypt blob_bpmp_sigheader.bin.hash zerosbk [ 5.9028 ] [ 5.9041 ] tegrahost_v2 --align blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb [ 5.9052 ] [ 5.9062 ] tegrahost_v2 --appendsigheader blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2.dtb zerosbk [ 5.9081 ] [ 5.9099 ] tegrasign_v2 --key None --list blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb_list.xml [ 5.9109 ] Assuming zero filled SBK key [ 5.9261 ] [ 5.9277 ] tegrahost_v2 --updatesigheader blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.hash zerosbk [ 5.9301 ] [ 5.9315 ] tegrahost_v2 --align blob_tos.img [ 5.9326 ] [ 5.9335 ] tegrahost_v2 --appendsigheader blob_tos.img zerosbk [ 5.9347 ] [ 5.9364 ] tegrasign_v2 --key None --list blob_tos_sigheader.img_list.xml [ 5.9375 ] Assuming zero filled SBK key [ 5.9405 ] [ 5.9425 ] tegrahost_v2 --updatesigheader blob_tos_sigheader.img.encrypt blob_tos_sigheader.img.hash zerosbk [ 5.9440 ] [ 5.9454 ] tegrahost_v2 --align blob_eks.img [ 5.9466 ] [ 5.9478 ] tegrahost_v2 --appendsigheader blob_eks.img zerosbk [ 5.9488 ] [ 5.9501 ] tegrasign_v2 --key None --list blob_eks_sigheader.img_list.xml [ 5.9510 ] Assuming zero filled SBK key [ 5.9513 ] [ 5.9533 ] tegrahost_v2 --updatesigheader blob_eks_sigheader.img.encrypt blob_eks_sigheader.img.hash zerosbk [ 5.9545 ] [ 5.9561 ] tegrahost_v2 --align blob_tegra186-quill-p3310-1000-c03-00-base.dtb [ 5.9574 ] [ 5.9587 ] tegrahost_v2 --appendsigheader blob_tegra186-quill-p3310-1000-c03-00-base.dtb zerosbk [ 5.9612 ] [ 5.9628 ] tegrasign_v2 --key None --list blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb_list.xml [ 5.9642 ] Assuming zero filled SBK key [ 5.9762 ] [ 5.9782 ] tegrahost_v2 --updatesigheader blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.hash zerosbk [ 5.9798 ] [ 5.9819 ] tegrahost_v2 --generateblob blob.xml blob.bin [ 5.9829 ] number of images in blob are 9 [ 5.9834 ] blobsize is 3748296 [ 5.9836 ] Added binary blob_nvtboot_recovery_cpu_sigheader.bin.encrypt of size 190048 [ 5.9855 ] Added binary blob_nvtboot_recovery_sigheader.bin.encrypt of size 79600 [ 5.9863 ] Added binary blob_preboot_d15_prod_cr_sigheader.bin.encrypt of size 63024 [ 5.9872 ] Added binary blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt of size 2076832 [ 5.9881 ] Added binary blob_bpmp_sigheader.bin.encrypt of size 529440 [ 5.9887 ] Added binary blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt of size 466160 [ 5.9901 ] Added binary blob_tos_sigheader.img.encrypt of size 62976 [ 5.9907 ] Added binary blob_eks_sigheader.img.encrypt of size 1488 [ 5.9913 ] Added binary blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt of size 278576 [ 5.9915 ] [ 5.9916 ] Sending bootloader and pre-requisite binaries [ 5.9931 ] tegrarcm_v2 --download blob blob.bin [ 5.9941 ] Applet version 01.00.0000 [ 6.2625 ] Sending blob [ 6.2629 ] [................................................] 100% [ 6.7014 ] [ 6.7036 ] tegrarcm_v2 --boot recovery [ 6.7055 ] Applet version 01.00.0000 [ 6.9756 ] [ 6.9777 ] tegrarcm_v2 --isapplet [ 7.7025 ] [ 7.7218 ] tegradevflash_v2 --iscpubl [ 7.7238 ] CPU Bootloader is not running on device. [ 7.8540 ] [ 9.0414 ] Retrieving storage infomation [ 9.0438 ] tegrarcm_v2 --oem platformdetails storage storage_info.bin [ 9.0459 ] Applet is not running on device. Continue with Bootloader [ 9.3376 ] [ 9.3400 ] tegradevflash_v2 --oem platformdetails storage storage_info.bin [ 9.3422 ] Bootloader version 01.00.0000 [ 9.4871 ] Saved platform info in storage_info.bin [ 9.4932 ] [ 9.4933 ] Flashing the device [ 9.4954 ] tegraparser_v2 --storageinfo storage_info.bin --generategpt --pt flash.xml.bin [ 9.4993 ] [ 9.5008 ] tegradevflash_v2 --pt flash.xml.bin --create [ 9.5021 ] Bootloader version 01.00.0000 [ 9.6306 ] Erasing sdmmc_boot: 3 ......... [Done] [ 9.6749 ] Writing partition secondary_gpt with gpt_secondary_0_3.bin [ 9.6764 ] [................................................] 100% [ 9.7383 ] Erasing sdmmc_user: 3 ......... [Done] [ 12.0251 ] Writing partition master_boot_record with mbr_1_3.bin [ 12.0263 ] [................................................] 100% [ 12.0350 ] Writing partition primary_gpt with gpt_primary_1_3.bin [ 12.0471 ] [................................................] 100% [ 12.0562 ] Writing partition secondary_gpt with gpt_secondary_1_3.bin [ 12.0738 ] [................................................] 100% [ 12.0990 ] Writing partition mb1 with mb1_prod.bin.encrypt [ 12.1004 ] [................................................] 100% [ 12.1146 ] Writing partition mb1_b with mb1_prod.bin.encrypt [ 12.1403 ] [................................................] 100% [ 12.1539 ] Writing partition spe-fw with spe_sigheader.bin.encrypt [ 12.1803 ] [................................................] 100% [ 12.1931 ] Writing partition spe-fw_b with spe_sigheader.bin.encrypt [ 12.2071 ] [................................................] 100% [ 12.2200 ] Writing partition mb2 with nvtboot_sigheader.bin.encrypt [ 12.2289 ] [................................................] 100% [ 12.2428 ] Writing partition mb2_b with nvtboot_sigheader.bin.encrypt [ 12.2879 ] [................................................] 100% [ 12.3002 ] Writing partition mts-preboot with preboot_d15_prod_cr_sigheader.bin.encrypt [ 12.3495 ] [................................................] 100% [ 12.3607 ] Writing partition mts-preboot_b with preboot_d15_prod_cr_sigheader.bin.encrypt [ 12.4080 ] [................................................] 100% [ 12.4194 ] Writing partition SMD with slot_metadata.bin [ 12.4767 ] [................................................] 100% [ 12.5005 ] Writing partition SMD_b with slot_metadata.bin [ 12.5118 ] [................................................] 100% [ 12.5219 ] Writing partition master_boot_record with mbr_1_3.bin [ 12.5745 ] [................................................] 100% [ 12.5832 ] Writing partition APP with system.img [ 12.5890 ] [................................................] 100% [ 180.0566 ] Writing partition mts-bootpack with mce_mts_d15_prod_cr_sigheader.bin.encrypt [ 180.0658 ] [................................................] 100% [ 180.1593 ] Writing partition mts-bootpack_b with mce_mts_d15_prod_cr_sigheader.bin.encrypt [ 180.1804 ] [................................................] 100% [ 180.2720 ] Writing partition cpu-bootloader with cboot_sigheader.bin.encrypt [ 180.2907 ] [................................................] 100% [ 180.3132 ] Writing partition cpu-bootloader_b with cboot_sigheader.bin.encrypt [ 180.3216 ] [................................................] 100% [ 180.3419 ] Writing partition bootloader-dtb with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt [ 180.3510 ] [................................................] 100% [ 180.3703 ] Writing partition bootloader-dtb_b with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt [ 180.3808 ] [................................................] 100% [ 180.4000 ] Writing partition secure-os with tos_sigheader.img.encrypt [ 180.4111 ] [................................................] 100% [ 180.4232 ] Writing partition secure-os_b with tos_sigheader.img.encrypt [ 180.4302 ] [................................................] 100% [ 180.4423 ] Writing partition eks with eks_sigheader.img.encrypt [ 180.4488 ] [................................................] 100% [ 180.4588 ] Writing partition bpmp-fw with bpmp_sigheader.bin.encrypt [ 180.4642 ] [................................................] 100% [ 180.4915 ] Writing partition bpmp-fw_b with bpmp_sigheader.bin.encrypt [ 180.5050 ] [................................................] 100% [ 180.5327 ] Writing partition bpmp-fw-dtb with tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt [ 180.5488 ] [................................................] 100% [ 180.5742 ] Writing partition bpmp-fw-dtb_b with tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt [ 180.5881 ] [................................................] 100% [ 180.6133 ] Writing partition sce-fw with camera-rtcpu-sce_sigheader.bin.encrypt [ 180.6254 ] [................................................] 100% [ 180.6377 ] Writing partition sce-fw_b with camera-rtcpu-sce_sigheader.bin.encrypt [ 180.6449 ] [................................................] 100% [ 180.6568 ] Writing partition sc7 with warmboot_wbheader.bin.encrypt [ 180.6645 ] [................................................] 100% [ 180.6755 ] Writing partition sc7_b with warmboot_wbheader.bin.encrypt [ 180.6814 ] [................................................] 100% [ 180.6917 ] Writing partition BMP with bmp.blob [ 180.7452 ] [................................................] 100% [ 181.2088 ] Writing partition BMP_b with bmp.blob [ 181.2211 ] [................................................] 100% [ 181.6864 ] Writing partition kernel with boot_sigheader.img.encrypt [ 181.6984 ] [................................................] 100% [ 182.6509 ] Writing partition kernel_b with boot_sigheader.img.encrypt [ 182.6655 ] [................................................] 100% [ 183.6253 ] Writing partition kernel-dtb with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt [ 183.6389 ] [................................................] 100% [ 183.6577 ] Writing partition kernel-dtb_b with tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt [ 183.6670 ] [................................................] 100% [ 183.6951 ] [ 183.6971 ] tegradevflash_v2 --write BCT br_bct_BR.bct [ 183.6991 ] Bootloader version 01.00.0000 [ 183.8313 ] Writing partition BCT with br_bct_BR.bct [ 183.8326 ] [................................................] 100% [ 183.8989 ] [ 183.9552 ] tegradevflash_v2 --write MB1_BCT mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 183.9569 ] Bootloader version 01.00.0000 [ 184.0871 ] Writing partition MB1_BCT with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 184.0894 ] [................................................] 100% [ 184.1637 ] [ 184.1661 ] tegradevflash_v2 --write MB1_BCT_b mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 184.1682 ] Bootloader version 01.00.0000 [ 184.2981 ] Writing partition MB1_BCT_b with mb1_cold_boot_bct_MB1_sigheader.bct.encrypt [ 184.2996 ] [................................................] 100% [ 184.3645 ] [ 184.3646 ] Flashing completed [ 184.3648 ] Coldbooting the device [ 184.3672 ] tegradevflash_v2 --reboot coldboot [ 184.3695 ] Bootloader version 01.00.0000 [ 184.5089 ] *** The target t186ref has been flashed successfully. *** Reset the board to boot from internal eMMC.