[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2033152 [ 0.000000] DMA zone: 7192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 460288 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2001384 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 pcie_aspm=off pci=nomsi [ 0.000000] PCIe ASPM is disabled [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30060(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7190516K/8132608K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 188428K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000695] Console: colour dummy device 80x25 [ 0.000706] console [tty0] enabled [ 0.000714] bootconsole [tegra_comb_uart0] disabled [ 0.000733] kmemleak: Kernel memory leak detector disabled [ 0.000751] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000766] pid_max: default: 32768 minimum: 301 [ 0.001824] Security Framework initialized [ 0.002404] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002414] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004042] ftrace: allocating 47077 entries in 184 pages [ 0.398003] sched-energy: Sched-energy-costs installed from DT [ 0.398022] ASID allocator initialised with 65536 entries [ 0.432976] tegra-id: chipid=21917. [ 0.432988] tegra-id: opt_subrevision=1. [ 0.433016] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.433041] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-brma3n-11x-nx.dts [ 0.433052] DTB Build time: Oct 20 2022 08:59:42 [ 0.481019] CPU1: Booted secondary processor [4e0f0040] [ 0.513099] CPU2: Booted secondary processor [4e0f0040] [ 0.545204] CPU3: Booted secondary processor [4e0f0040] [ 0.577498] CPU4: Booted secondary processor [4e0f0040] [ 0.609552] CPU5: Booted secondary processor [4e0f0040] [ 0.609781] Brought up 6 CPUs [ 0.609836] SMP: Total of 6 processors activated. [ 0.609852] CPU features: detected feature: Privileged Access Never [ 0.609859] CPU features: detected feature: LSE atomic instructions [ 0.609865] CPU features: detected feature: User Access Override [ 0.609871] CPU features: detected feature: 32-bit EL0 Support [ 0.611375] CPU: All CPU(s) started at EL2 [ 0.611437] alternatives: patching kernel code [ 0.617800] devtmpfs: initialized [ 0.663907] Initilizing CustomIPI irq domain [ 0.664146] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.664166] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.685905] pinctrl core: initialized pinctrl subsystem [ 0.686145] OS set in device tree is not L4T. [ 0.686432] regulator-dummy: no parameters [ 0.686683] Initializing plugin-manager [ 0.686735] Plugin module not found [ 0.686790] Plugin-manager status disabled [ 0.688055] NET: Registered protocol family 16 [ 0.690299] pstore: using zlib compression [ 0.690324] console [pstore-1] enabled [ 0.690333] pstore: Registered ramoops as persistent store backend [ 0.690342] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.708422] cpuidle: using governor menu [ 0.709698] bpmp: waiting for handshake [ 0.709711] bpmp: handshake completed [ 0.709739] bpmp: synchronizing channels [ 0.709750] bpmp: channels synchronized [ 0.709757] bpmp: mail init ok [ 0.712879] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.713095] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.713101] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.713132] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.713138] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.713143] t19x-arm-smmu 12000000.iommu: nested translation [ 0.713152] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.713159] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.713167] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.713193] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.713199] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.716415] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.716476] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.719049] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.720409] tegra_aon_clk_init: ok [ 0.720485] Registering BPMP clocks... [ 0.720614] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.721334] Serial: AMBA PL011 UART driver [ 0.721506] tegra_powergate_init: DONE [ 0.721568] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-brma3n-11x-nx.dts [ 0.721586] DTB Build time: Oct 20 2022 08:59:42 [ 0.724628] Tegra reboot handler registered. [ 0.734300] iommu: Adding device 14160000.pcie to group 0 [ 0.735070] iommu: Adding device 141a0000.pcie to group 1 [ 0.736720] iommu: Adding device 2490000.ether_qos to group 2 [ 0.737410] iommu: Adding device 3100000.serial to group 3 [ 0.738043] iommu: Adding device 3110000.serial to group 4 [ 0.738717] iommu: Adding device 3140000.serial to group 5 [ 0.739434] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.740573] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.740633] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.740644] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.740649] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.740705] tegra-pmc: PMC Prod config success [ 0.740989] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.741004] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.741380] iommu: Adding device 3460000.sdhci to group 6 [ 0.741983] iommu: Adding device 3440000.sdhci to group 7 [ 0.742539] iommu: Adding device 3210000.spi to group 8 [ 0.743033] iommu: Adding device 3230000.spi to group 9 [ 0.743576] iommu: Adding device 3270000.spi to group 10 [ 0.744999] iommu: Adding device 3160000.i2c to group 11 [ 0.745464] iommu: Adding device c240000.i2c to group 12 [ 0.745930] iommu: Adding device 3180000.i2c to group 13 [ 0.746398] iommu: Adding device 3190000.i2c to group 14 [ 0.747028] iommu: Adding device 31b0000.i2c to group 15 [ 0.747542] iommu: Adding device 31c0000.i2c to group 16 [ 0.748198] iommu: Adding device c250000.i2c to group 17 [ 0.748960] iommu: Adding device 31e0000.i2c to group 18 [ 0.749875] iommu: Adding device sound to group 19 [ 0.750513] iommu: Adding device 3510000.hda to group 20 [ 0.751197] iommu: Adding device bc00000.rtcpu to group 21 [ 0.753483] iommu: Adding device 13e10000.host1x to group 22 [ 0.754023] iommu: Adding device 13e10000.host1x:ctx0 to group 23 [ 0.754434] iommu: Adding device 13e10000.host1x:ctx1 to group 24 [ 0.754914] iommu: Adding device 13e10000.host1x:ctx2 to group 25 [ 0.755390] iommu: Adding device 13e10000.host1x:ctx3 to group 26 [ 0.755912] iommu: Adding device 13e10000.host1x:ctx4 to group 27 [ 0.756399] iommu: Adding device 13e10000.host1x:ctx5 to group 28 [ 0.756830] iommu: Adding device 13e10000.host1x:ctx6 to group 29 [ 0.757280] iommu: Adding device 13e10000.host1x:ctx7 to group 30 [ 0.757969] iommu: Adding device 15340000.vic to group 31 [ 0.758438] iommu: Adding device 15380000.nvjpg to group 32 [ 0.758742] iommu: Adding device 15500000.tsec to group 33 [ 0.759094] iommu: Adding device 15100000.tsecb to group 34 [ 0.759412] iommu: Adding device 15480000.nvdec to group 35 [ 0.759721] iommu: Adding device 15140000.nvdec1 to group 36 [ 0.760039] iommu: Adding device 154c0000.nvenc to group 37 [ 0.760412] iommu: Adding device 15a80000.nvenc1 to group 38 [ 0.760938] iommu: Adding device 15880000.nvdla0 to group 39 [ 0.762053] iommu: Adding device 158c0000.nvdla1 to group 40 [ 0.762711] iommu: Adding device 15200000.nvdisplay to group 41 [ 0.766780] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.766866] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.768236] iommu: Adding device 15c10000.vi to group 42 [ 0.768404] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.768839] iommu: Adding device 14800000.isp to group 43 [ 0.770029] iommu: Adding device 16000000.pva0 to group 44 [ 0.770592] iommu: Adding device 16800000.pva1 to group 45 [ 0.771114] iommu: Adding device 15810000.se to group 46 [ 0.771531] iommu: Adding device 15820000.se to group 47 [ 0.771837] iommu: Adding device 15830000.se to group 48 [ 0.772232] iommu: Adding device 15840000.se to group 49 [ 0.772586] iommu: Adding device c1a0000.aon to group 50 [ 0.775107] iommu: Adding device d000000.bpmp to group 51 [ 0.775468] bpmp: ping status is 0 [ 0.775627] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.778943] bpmp d000000.bpmp: probe ok [ 0.781055] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.781592] iommu: Adding device smmu_test to group 52 [ 0.782919] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.782938] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.782956] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.782975] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.782992] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.783008] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.783024] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.783041] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.783058] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.783074] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.783091] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.783107] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.783124] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.783162] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.783179] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.783196] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.783212] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.783314] mc-err: mcerr ops are set to t19x [ 0.790655] iommu: Adding device 2600000.dma to group 53 [ 0.796695] GPIO line 339 (wifi-enable) hogged as output/high [ 0.796734] GPIO line 436 (power-led) hogged as output/low [ 0.796772] GPIO line 417 (status-led) hogged as output/low [ 0.797139] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.805819] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.806156] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.808725] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.808736] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.808745] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.809606] iommu: Adding device 3550000.xudc to group 54 [ 0.810342] iommu: Adding device 3610000.xhci to group 55 [ 0.812454] arm64_ras arm64_ras: probed [ 0.812884] ras_fhi_enable: FHI 467 enabled on CPU0 [ 0.812923] ras_fhi_enable: FHI 468 enabled on CPU1 [ 0.812992] ras_fhi_enable: FHI 469 enabled on CPU2 [ 0.813046] ras_fhi_enable: FHI 470 enabled on CPU3 [ 0.813116] ras_fhi_enable: FHI 471 enabled on CPU4 [ 0.813169] ras_fhi_enable: FHI 472 enabled on CPU5 [ 0.813344] carmel_ras_enable: RAS enabled on cpu0 [ 0.813505] carmel_ras_enable: RAS enabled on cpu1 [ 0.813686] carmel_ras_enable: RAS enabled on cpu2 [ 0.813875] carmel_ras_enable: RAS enabled on cpu3 [ 0.814066] carmel_ras_enable: RAS enabled on cpu4 [ 0.814262] carmel_ras_enable: RAS enabled on cpu5 [ 0.814324] carmel_ras carmel_ras: probed [ 0.815510] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 476, noc_nonsecure_irq = 475> [ 0.816038] tegra-cbb c600000.aon-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.817196] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.818238] tegra-cbb be00000.rce-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.819203] tegra-cbb b600000.sce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.819622] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.820900] vdd-3v3-cvb: 3300 mV [ 0.821249] vdd-1v8-cvb: 1800 mV [ 0.821619] vdd-fan: 5000 mV [ 0.821947] vdd-hdmi-5v0: 5000 mV [ 0.822311] vdd_sys_en: 1200 mV [ 0.822777] usb1_en: 5000 mV [ 0.823160] sdcard_en: 3300 mV [ 0.823484] vdd-ac-bat: 5000 mV [ 0.823902] vdd-sdmmc1-sw: 3300 mV [ 0.824229] vdd-1v8-sd: 1800 mV [ 0.824533] vdd-epb-1v0: 1000 mV [ 0.824716] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.825020] avdd-cam-2v8: 2800 mV [ 0.863306] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.867658] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.867953] SCSI subsystem initialized [ 0.868148] libata version 3.00 loaded. [ 0.868452] usbcore: registered new interface driver usbfs [ 0.868528] usbcore: registered new interface driver hub [ 0.868602] usbcore: registered new device driver usb [ 0.872690] tegra-i2c c240000.i2c: no acknowledge from address 0x20 [ 0.872741] pca953x 1-0020: failed reading register [ 0.872828] pca953x: probe of 1-0020 failed with error -121 [ 0.873307] tegra-i2c c240000.i2c: no acknowledge from address 0x21 [ 0.873379] pca953x 1-0021: failed reading register [ 0.873457] pca953x: probe of 1-0021 failed with error -121 [ 0.881079] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.883866] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.890821] vdd-1v0: at 1000 mV [ 0.894838] vdd-1v8-hs: at 1800 mV [ 0.898847] vdd-1v8-ls: at 1800 mV [ 0.902903] vdd-1v8-ao: at 1800 mV [ 0.906888] vddio-ddr-1v1: at 1100 mV [ 0.910669] vdd-rtc: at 800 mV [ 0.911960] spmic-ldo1: at 2375 mV [ 0.918711] vdd-ao-3v3: at 3300 mV [ 0.926778] vddio-emmc-3v3: at 3300 mV [ 0.927995] spmic-ldo4: at 1587 mV [ 0.934795] vdd-usb-3v3: at 3300 mV [ 0.942836] vddio-sdmmc1-3v3: at 3300 mV [ 0.946856] vdd-csi-1v2: at 1200 mV [ 0.948319] spmic-ldo8: at 1800 mV [ 0.953275] GPIO line 246 (gpio_default) hogged as output/high [ 0.954612] GPIO line 247 (gpio_default) hogged as output/high [ 0.954932] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.955273] max77620 4-003c: max77620 probe successful [ 0.955952] media: Linux media interface: v0.10 [ 0.956039] Linux video capture interface: v2.00 [ 0.957543] pps_core: LinuxPPS API ver. 1 registered [ 0.957550] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.957570] PTP clock support registered [ 0.957817] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.958072] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.958102] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.960858] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.960920] trusty trusty: selected api version: 3 (requested 3) [ 0.962392] Advanced Linux Sound Architecture Driver Initialized. [ 0.963098] Bluetooth: Core ver 2.22 [ 0.963186] NET: Registered protocol family 31 [ 0.963192] Bluetooth: HCI device and connection manager initialized [ 0.963204] Bluetooth: HCI socket layer initialized [ 0.963212] Bluetooth: L2CAP socket layer initialized [ 0.963240] Bluetooth: SCO socket layer initialized [ 0.966173] camchar: rtcpu character device driver loaded [ 0.966733] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.966831] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.967769] clocksource: Switched to clocksource arch_sys_counter [ 1.014578] VFS: Disk quotas dquot_6.6.0 [ 1.014667] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.015054] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.016478] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.016545] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.016798] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.016805] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.016819] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.016828] nvmap_page_pool_init: Total RAM pages: 1986045 [ 1.016833] nvmap_page_pool_init: nvmap page pool size: 248255 pages (969 MB) [ 1.016994] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.017449] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.019364] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.032935] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.033242] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.033476] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.033661] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.033855] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.035101] la/ptsa driver initialized. [ 1.035441] NET: Registered protocol family 2 [ 1.036262] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.036611] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.037212] TCP: Hash tables configured (established 65536 bind 65536) [ 1.037260] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.037382] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.037766] NET: Registered protocol family 1 [ 1.038349] RPC: Registered named UNIX socket transport module. [ 1.038355] RPC: Registered udp transport module. [ 1.038360] RPC: Registered tcp transport module. [ 1.038365] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.038376] PCI: CLS 0 bytes, default 64 [ 1.038646] Trying to unpack rootfs image as initramfs... [ 1.258985] Freeing initrd memory: 7068K [ 1.278302] random: fast init done [ 1.282726] host1x 13e10000.host1x: initialized [ 1.284645] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.289425] audit: initializing netlink subsys (disabled) [ 1.289465] audit: type=2000 audit(0.908:1): initialized [ 1.290262] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.300835] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.302113] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.302738] 9p: Installing v9fs 9p2000 file system support [ 1.307911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.308107] io scheduler noop registered [ 1.308368] io scheduler cfq registered (default) [ 1.312081] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.346106] iommu: Adding device 2993000.adsp to group 56 [ 1.436982] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.437224] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.450960] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.451408] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.452059] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.452468] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.452836] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.458558] tsec 15500000.tsec: initialized [ 1.460196] tsec 15100000.tsecb: initialized [ 1.464141] nvdec 15480000.nvdec: initialized [ 1.466684] nvdec 15140000.nvdec1: initialized [ 1.472781] falcon 15340000.vic: initialized [ 1.474644] falcon 15380000.nvjpg: initialized [ 1.476351] falcon 154c0000.nvenc: initialized [ 1.478112] falcon 15a80000.nvenc1: initialized [ 1.481221] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.482567] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.483932] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.485272] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.486592] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.487994] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.489348] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.490692] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.494077] t194-nvcsi 15a00000.nvcsi: initialized [ 1.494210] driver not enabled, cannot register any devices [ 1.499317] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.499742] scare-pigeon 14b00000.isp-thi: initialized [ 1.505477] pva 16000000.pva0: initialized [ 1.510885] pva 16800000.pva1: initialized [ 1.515855] nvdla 15880000.nvdla0: initialized [ 1.520534] nvdla 158c0000.nvdla1: initialized [ 1.521821] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.521833] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.521864] tegradccommon 15200000.dc_common: dma mapping done [ 1.523060] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.523095] tegradc 15200000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.523233] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.523270] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.528494] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.528502] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.528508] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.528791] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.528801] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.535393] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.536351] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.536359] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.536887] kfuse 3830000.kfuse: initialized [ 1.540919] tegradc 15200000.nvdisplay: probed [ 1.541609] Console: switching to colour frame buffer device 80x30 [ 1.541641] tegradc 15200000.nvdisplay: fb registered [ 1.545619] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.547959] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.549028] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.549766] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.551002] console [ttyTCU0] enabled [ 1.551245] [drm] Initialized [ 1.552828] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.552957] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.557905] Parent Clock set for DC plld2 [ 1.562994] brd: module loaded [ 1.565975] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.568023] loop: module loaded [ 1.568090] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.568259] tegra_profiler: auth: init [ 1.568860] THERMAL EST: found 3 subdevs [ 1.568874] THERMAL EST num_resources: 0 [ 1.568885] [THERMAL EST subdev 0] [ 1.568895] [THERMAL EST subdev 1] [ 1.568904] [THERMAL EST subdev 2] [ 1.568918] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.569279] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.569287] THERMAL EST: thz register success. [ 1.569483] THERMAL EST: end of probe, return err: 0 [ 1.570126] sd: No Scsi addr parsed to reserve index [ 1.570164] hisi_sas: driver version v1.6 [ 1.579557] dp lt: state 0 (Reset), pending_lt_evt 1 [ 1.579572] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 1.579584] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.580960] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.580970] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.580980] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.581269] 1 ofpart partitions found on MTD device spi6.0 [ 1.581283] Creating 1 MTD partitions on "spi6.0": [ 1.581298] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.582025] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.582041] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.582528] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.582569] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.582595] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.582615] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.582651] dp lt: tx_pu: 0x20 [ 1.583636] libphy: Fixed MDIO Bus: probed [ 1.584278] tun: Universal TUN/TAP device driver, 1.6 [ 1.584284] tun: (C) 1999-2004 Max Krasnyansky [ 1.584298] dp lt: CR not done [ 1.585022] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.585028] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.585071] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.585076] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.585126] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.585131] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.585197] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.585202] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.585333] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.585341] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.585349] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.585355] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.585359] dp lt: CR retry [ 1.585366] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.585375] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.585397] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.585413] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.585428] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.585444] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.585454] dp lt: tx_pu: 0x40 [ 1.586679] tegradc 15200000.nvdisplay: dp: aux read defer (0x10020000) -- 6 [ 1.588479] dp lt: CR done [ 1.588488] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.588499] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.592772] dp lt: CE done [ 1.592787] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.593033] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.593045] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.695811] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.695852] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.703819] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.713214] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.759973] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.760448] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.760946] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 1.761418] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.761917] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.762393] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.762891] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.762897] tegradc 15200000.nvdisplay: blank - powerdown [ 1.809752] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.809763] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.809773] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.809784] dp lt: link training force disable [ 1.809791] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.831080] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.831835] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 5f f8 6 [ 1.831876] Using phyrst_lpmode = 1 from DT [ 1.832091] libphy: dwc_phy: probed [ 1.838009] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.839448] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.840424] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.841122] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.841606] PPP generic driver version 2.4.2 [ 1.842325] PPP BSD Compression module registered [ 1.842346] PPP Deflate Compression module registered [ 1.842433] PPP MPPE Compression module registered [ 1.842446] NET: Registered protocol family 24 [ 1.842566] usbcore: registered new interface driver r8152 [ 1.842640] usbcore: registered new interface driver asix [ 1.842739] usbcore: registered new interface driver ax88179_178a [ 1.842779] usbcore: registered new interface driver cdc_ether [ 1.842818] usbcore: registered new interface driver net1080 [ 1.842861] usbcore: registered new interface driver cdc_subset [ 1.842904] usbcore: registered new interface driver zaurus [ 1.842966] usbcore: registered new interface driver cdc_ncm [ 1.843536] VFIO - User Level meta-driver version: 0.3 [ 1.850606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.850720] ehci-pci: EHCI PCI platform driver [ 1.850775] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.850799] ohci-pci: OHCI PCI platform driver [ 1.850859] ohci-platform: OHCI generic platform driver [ 1.861780] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.865783] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f5627400 id [ 1.866710] tegradc 15200000.nvdisplay: unblank [ 1.868550] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.868772] usbcore: registered new interface driver uas [ 1.868893] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.868929] usbcore: registered new interface driver usb-storage [ 1.869546] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.869702] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.869784] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.870711] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.870806] tegra-xusb 3610000.xhci: irq 462, io mem 0x03610000 [ 1.871131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.871140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.871147] usb usb1: Product: xHCI Host Controller [ 1.871153] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.871157] usb usb1: SerialNumber: 3610000.xhci [ 1.871914] usbcore: registered new interface driver usbserial [ 1.872215] hub 1-0:1.0: USB hub found [ 1.872285] hub 1-0:1.0: 4 ports detected [ 1.873012] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.873027] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.873043] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.873998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.874006] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.874012] usb usb2: Product: xHCI Host Controller [ 1.874017] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.874022] usb usb2: SerialNumber: 3610000.xhci [ 1.875217] hub 2-0:1.0: USB hub found [ 1.875307] hub 2-0:1.0: 4 ports detected [ 1.876413] Wake76 for irq=199 [ 1.876417] Wake77 for irq=199 [ 1.876420] Wake78 for irq=199 [ 1.876422] Wake79 for irq=199 [ 1.876425] Wake80 for irq=199 [ 1.876427] Wake81 for irq=199 [ 1.876430] Wake82 for irq=199 [ 1.876492] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.876499] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.881098] Parent Clock set for DC plld2 [ 1.881213] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.881297] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.883035] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 1.883057] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 1.883364] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 1.883376] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.884102] mousedev: PS/2 mouse device common for all mice [ 1.884209] usbcore: registered new interface driver xpad [ 1.886347] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.897857] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1.897863] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1.897868] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.900136] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.900143] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.900612] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.900626] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.900640] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.900653] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.900662] dp lt: tx_pu: 0x20 [ 1.902282] dp lt: CR not done [ 1.903190] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.903195] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.903200] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.903226] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.903228] dp lt: CR retry [ 1.903232] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.903238] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.903256] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.903269] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.903282] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.903296] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.903303] dp lt: tx_pu: 0x40 [ 1.904935] dp lt: CR done [ 1.904943] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.904972] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.909005] dp lt: CE done [ 1.909034] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.925741] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.948838] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.949330] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.949808] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 1.950277] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.950745] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.951212] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.951679] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.951685] tegradc 15200000.nvdisplay: blank - powerdown [ 1.980104] usb usb2: usb_suspend_both: status 0 [ 1.992401] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.992408] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.992438] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.992446] dp lt: link training force disable [ 1.992449] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 2.013762] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.015326] Wake73 for irq=42 [ 2.016678] rtc rtc1: alarm rtc device [ 2.016693] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.016725] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.017215] i2c /dev entries driver [ 2.018327] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 2.021048] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 2.023317] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 2.023887] max77620-power max20024-power: Event recorder REG_NVERC : 0x80 [ 2.023953] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 2.030141] tegradc 15200000.nvdisplay: unblank [ 2.032316] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 2.032739] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 2.044282] Parent Clock set for DC plld2 [ 2.044500] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.045011] FAN dev name: pwm-fan [ 2.045114] FAN:gpio request success. [ 2.045125] FAN: can't find tach_gpio [ 2.045135] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.045298] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.045586] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.045606] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.046197] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.046204] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.046224] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.046229] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.046235] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.046240] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.046245] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.046250] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.046256] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.046262] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.047270] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.048301] device-mapper: uevent: version 1.0.3 [ 2.048757] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.049628] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 2.052002] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.053314] cpuidle: Initializing cpuidle driver [ 2.054343] sdhci: Secure Digital Host Controller Interface driver [ 2.054346] sdhci: Copyright(c) Pierre Ossman [ 2.054348] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.055404] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.057385] CMDQ: cmdq_platfm_init successful [ 2.058010] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 2.060442] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 2.062221] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 2.062224] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 2.062228] dp lt: state 0 (Reset), pending_lt_evt 0 [ 2.063203] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 436 [ 2.064655] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 2.064661] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.065126] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 2.065141] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 2.065157] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 2.065176] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 2.065187] dp lt: tx_pu: 0x20 [ 2.066818] dp lt: CR not done [ 2.067711] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 2.067714] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 2.067716] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 2.067719] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 2.067721] dp lt: CR retry [ 2.067723] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 2.067728] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.067743] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 2.067789] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 2.067800] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 2.067814] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 2.067821] dp lt: tx_pu: 0x40 [ 2.067916] tegra-se-nvhost 15810000.se: initialized [ 2.069092] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.069636] dp lt: CR done [ 2.069639] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 2.069644] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.069857] tegra-se-nvhost 15820000.se: initialized [ 2.071103] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.071697] tegra-se-nvhost 15830000.se: initialized [ 2.072362] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.072937] tegra-se-nvhost 15840000.se: initialized [ 2.073670] dp lt: CE done [ 2.073674] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 2.073969] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.075071] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.075208] hidraw: raw HID events driver (C) Jiri Kosina [ 2.076498] usbcore: registered new interface driver usbhid [ 2.076500] usbhid: USB HID core driver [ 2.080386] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.081425] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.081862] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.082468] denver_knobs_init:MTS_VERSION:53250041 [ 2.082789] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.083403] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.084111] t19x_cache tegra-cache: probed [ 2.086177] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.086205] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.086785] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.088377] Clocks initialized successfully [ 2.090287] nvpmodel: initialized successfully [ 2.090380] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 2.091310] trusty-virtio trusty:virtio: initializing [ 2.091531] trusty_ipc virtio0: vring0: va(pa) ffffffc1e100c000(0) qsz 32 notifyid 1 [ 2.091539] trusty_ipc virtio0: vring1: va(pa) ffffffc1e100e000(0) qsz 32 notifyid 2 [ 2.091713] trusty-virtio trusty:virtio: initializing done [ 2.091913] trusty_ipc virtio0: is online [ 2.092292] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.092696] usbcore: registered new interface driver snd-usb-audio [ 2.102313] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 2.105301] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.105536] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.105707] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.105930] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.107822] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.107963] gpio tegra-gpio-aon wake39 for gpio=19(CC:3) [ 2.108022] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.111267] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 2.111271] Extcon DP: HPD enabled [ 2.111284] hpd: Display connected, hpd_switch 1 [ 2.111288] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 2.150014] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.164605] mmc0: periodic cache flush enabled [ 2.164623] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.165123] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.165310] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.165535] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.168551] OPE platform probe [ 2.168671] OPE platform probe successful [ 2.169351] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.174527] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.203839] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 2.224141] usb 1-3: New USB device found, idVendor=0424, idProduct=2517 [ 2.224149] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.224979] hub 1-3:1.0: USB hub found [ 2.225065] hub 1-3:1.0: 7 ports detected [ 2.241642] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.241789] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.241922] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.242045] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.242159] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.242272] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.242384] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.242497] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.242633] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.242780] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.242932] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.243035] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.243146] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.243239] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.243330] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.243424] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.243514] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.243605] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.243696] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.243843] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.272217] u32 classifier [ 2.272222] Actions configured [ 2.272307] Initializing XFRM netlink socket [ 2.272962] NET: Registered protocol family 10 [ 2.273739] NET: Registered protocol family 17 [ 2.273751] NET: Registered protocol family 15 [ 2.273807] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.273915] Bluetooth: RFCOMM socket layer initialized [ 2.273936] Bluetooth: RFCOMM ver 1.11 [ 2.273943] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.273950] Bluetooth: HIDP socket layer initialized [ 2.273968] 9pnet: Installing 9P2000 support [ 2.274013] Key type dns_resolver registered [ 2.274252] Registered cp15_barrier emulation handler [ 2.274282] Registered setend emulation handler [ 2.276269] registered taskstats version 1 [ 2.276728] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.277685] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.277714] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.277723] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.277730] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.367796] usb 1-3: usb_suspend_both: status 0 [ 2.367889] usb usb1: usb_suspend_both: status 0 [ 2.387799] tegra-pcie-dw 14160000.pcie: link is up [ 2.388065] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.388073] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.388082] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.388090] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.388094] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.388123] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.388259] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.388521] iommu: Adding device 0004:00:00.0 to group 58 [ 2.388951] pci 0004:01:00.0: [12d8:b404] type 01 class 0x060400 [ 2.389781] pci 0004:01:00.0: supports D1 D2 [ 2.389786] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.390211] iommu: Adding device 0004:01:00.0 to group 59 [ 2.390359] pci 0004:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.390827] pci 0004:02:01.0: [12d8:b404] type 01 class 0x060400 [ 2.391657] pci 0004:02:01.0: supports D1 D2 [ 2.391661] pci 0004:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.392059] iommu: Adding device 0004:02:01.0 to group 60 [ 2.392253] pci 0004:02:02.0: [12d8:b404] type 01 class 0x060400 [ 2.393089] pci 0004:02:02.0: supports D1 D2 [ 2.393093] pci 0004:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.393518] iommu: Adding device 0004:02:02.0 to group 61 [ 2.393703] pci 0004:02:03.0: [12d8:b404] type 01 class 0x060400 [ 2.394544] pci 0004:02:03.0: supports D1 D2 [ 2.394549] pci 0004:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.394886] iommu: Adding device 0004:02:03.0 to group 62 [ 2.395228] pci 0004:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.395296] pci 0004:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.395345] pci 0004:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.395702] pci_bus 0004:03: busn_res: [bus 03-ff] end is updated to 03 [ 2.396083] pci_bus 0004:04: busn_res: [bus 04-ff] end is updated to 04 [ 2.396427] pci_bus 0004:05: busn_res: [bus 05-ff] end is updated to 05 [ 2.396451] pci_bus 0004:02: busn_res: [bus 02-ff] end is updated to 05 [ 2.397313] pci 0004:02:01.0: PCI bridge to [bus 03] [ 2.397400] pci 0004:02:02.0: PCI bridge to [bus 04] [ 2.397486] pci 0004:02:03.0: PCI bridge to [bus 05] [ 2.397571] pci 0004:01:00.0: PCI bridge to [bus 02-05] [ 2.397656] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.397677] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.397727] pci 0004:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128 [ 2.397776] pci 0004:02:01.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128 [ 2.397825] pci 0004:02:02.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128 [ 2.397874] pci 0004:02:03.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128 [ 2.398092] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.398097] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.398100] pci 0004:02:01.0: Signaling PME through PCIe PME interrupt [ 2.398104] pci 0004:02:02.0: Signaling PME through PCIe PME interrupt [ 2.398107] pci 0004:02:03.0: Signaling PME through PCIe PME interrupt [ 2.398114] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.402612] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.508280] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.508302] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.508313] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.508320] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.023970] tegra-pcie-dw 141a0000.pcie: link is down [ 3.024188] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.024205] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.024213] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.024220] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.024225] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.024252] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.024399] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.024601] iommu: Adding device 0005:00:00.0 to group 63 [ 3.024917] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.024962] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.025217] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.025225] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.025448] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.025546] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.025617] iommu: Removing device 0005:00:00.0 from group 63 [ 3.025688] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.027390] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.036909] tegra-cbb 14040000.cv-noc: noc_secure_irq = 88, noc_nonsecure_irq = 87> [ 3.041507] tegra194-isp5 14800000.isp: initialized [ 3.041513] driver not enabled, cannot register any devices [ 3.047840] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.050485] tegra194-vi5 15c10000.vi: initialized [ 3.050491] driver not enabled, cannot register any devices [ 3.055078] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.059346] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.059390] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.059396] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.059469] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.059503] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.059508] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.063554] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.063608] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.063614] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.064013] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.064052] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.064057] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.064503] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.064561] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.064566] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.064902] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.065662] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.143168] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.143481] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.143744] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.144020] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.144496] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.144568] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.144811] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66) [ 3.144815] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.145852] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.146299] Wake83 for irq=211 [ 3.146388] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.146457] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.146606] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.176859] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:15:16 UTC (946689316) [ 3.177372] mmcblk mmc0:0001: Card claimed for testing. [ 3.216074] bpmp: mounted debugfs mirror [ 3.221844] ALSA device list: [ 3.221850] #0: tegra-hda-xnx at 0x3518000 irq 65 [ 3.221854] #1: jetson-xaviernx-ape [ 3.223651] Freeing unused kernel memory: 8640K [ 3.263402] Root device found: mmcblk0p1 [ 3.265242] Found dev node: /dev/mmcblk0p1 [ 3.329701] EXT4-fs (mmcblk0p1): 17 orphan inodes deleted [ 3.329707] EXT4-fs (mmcblk0p1): recovery complete [ 3.338802] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.341841] Rootfs mounted over mmcblk0p1 [ 3.368726] Switching from initrd to actual rootfs [ 3.465287] systemd[1]: System time before build time, advancing clock. [ 3.485284] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.488793] cgroup: cgroup2: unknown option "nsdelegate" [ 3.496459] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.497137] systemd[1]: Detected architecture arm64. [ 3.502874] systemd[1]: Set hostname to . [ 3.587728] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.587740] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.747449] random: systemd: uninitialized urandom read (16 bytes read) [ 3.750539] systemd[1]: Created slice User and Session Slice. [ 3.750946] random: systemd: uninitialized urandom read (16 bytes read) [ 3.751390] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.751468] random: systemd: uninitialized urandom read (16 bytes read) [ 3.751593] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.751661] systemd[1]: Reached target User and Group Name Lookups. [ 3.751735] systemd[1]: Reached target Swap. [ 3.795454] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.857140] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.135163] systemd-journald[2353]: Received request to flush runtime journal from PID 1 [ 4.215837] tegra-xusb 3610000.xhci: entering ELPG [ 4.218660] tegra-xusb 3610000.xhci: entering ELPG done [ 4.794090] using random self ethernet address [ 4.794232] using random host ethernet address [ 4.920096] FAN rising trip_level:1 cur_temp:48200 trip_temps[2]:60000 [ 5.129656] random: crng init done [ 5.129875] random: 7 urandom warning(s) missed due to ratelimiting [ 5.334124] Mass Storage Function, version: 2009/09/11 [ 5.334133] LUN: removable file: (no medium) [ 5.344388] using random self ethernet address [ 5.344555] using random host ethernet address [ 5.414871] rndis0: HOST MAC 3e:61:88:a6:42:f8 [ 5.415145] rndis0: MAC 3e:61:88:a6:42:f9 [ 5.416386] usb0: HOST MAC 3e:61:88:a6:42:fa [ 5.416427] usb0: MAC 3e:61:88:a6:42:fb [ 5.416458] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.422684] l4tbr0: port 1(rndis0) entered blocking state [ 5.422690] l4tbr0: port 1(rndis0) entered disabled state [ 5.423638] device rndis0 entered promiscuous mode [ 5.430854] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.437430] l4tbr0: port 2(usb0) entered blocking state [ 5.437436] l4tbr0: port 2(usb0) entered disabled state [ 5.437659] device usb0 entered promiscuous mode [ 5.443670] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.577931] android_work: did not send uevent (0 0 (null)) [ 5.583466] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.601249] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 5.619752] cpu-throttle-alert cooling device registered. [ 5.620576] gpu-throttle-alert cooling device registered. [ 5.621190] aux-throttle-alert cooling device registered. [ 5.651186] android_work: sent uevent USB_STATE=CONNECTED [ 5.707540] android_work: sent uevent USB_STATE=DISCONNECTED [ 5.798706] android_work: sent uevent USB_STATE=CONNECTED [ 5.812095] configfs-gadget gadget: high-speed config #1: c [ 5.812131] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 5.812146] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 5.812161] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 5.812265] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 5.812282] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 5.812294] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 5.812331] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 5.812360] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 5.812379] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 5.812520] android_work: sent uevent USB_STATE=CONFIGURED [ 5.829731] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 5.829750] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 5.830488] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 5.830610] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 5.851487] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 5.851505] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 5.860645] zram: Added device: zram0 [ 5.864560] zram: Added device: zram1 [ 5.866713] zram: Added device: zram2 [ 5.869422] zram: Added device: zram3 [ 5.872011] zram: Added device: zram4 [ 5.876790] zram: Added device: zram5 [ 5.896843] zram0: detected capacity change from 0 to 679243776 [ 5.900758] gpio tegra-gpio wake20 for gpio=52(G:4) [ 5.913234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.915907] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 5.916068] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 5.980692] Adding 663320k swap on /dev/zram0. Priority:5 extents:1 across:663320k SS [ 5.984205] zram1: detected capacity change from 0 to 679243776 [ 6.008043] Adding 663320k swap on /dev/zram1. Priority:5 extents:1 across:663320k SS [ 6.013098] zram2: detected capacity change from 0 to 679243776 [ 6.041120] Adding 663320k swap on /dev/zram2. Priority:5 extents:1 across:663320k SS [ 6.044190] zram3: detected capacity change from 0 to 679243776 [ 6.073262] Adding 663320k swap on /dev/zram3. Priority:5 extents:1 across:663320k SS [ 6.076470] zram4: detected capacity change from 0 to 679243776 [ 6.099070] Adding 663320k swap on /dev/zram4. Priority:5 extents:1 across:663320k SS [ 6.102464] zram5: detected capacity change from 0 to 679243776 [ 6.121441] Adding 663320k swap on /dev/zram5. Priority:5 extents:1 across:663320k SS [ 6.579488] Bridge firewalling registered [ 6.649452] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 6.994971] Netfilter messages via NETLINK v0.30. [ 6.998354] ctnetlink v0.93: registering with nfnetlink. [ 7.230182] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 7.230743] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 7.231264] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 7.231823] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 7.232382] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 7.232897] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 7.233429] tegradc 15200000.nvdisplay: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 7.273089] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 7.350396] tegradc 15200000.nvdisplay: unblank [ 9.002246] fuse init (API version 7.26) [ 10.026530] l4tbr0: port 2(usb0) entered blocking state [ 10.026539] l4tbr0: port 2(usb0) entered forwarding state [ 10.026641] l4tbr0: port 1(rndis0) entered blocking state [ 10.026649] l4tbr0: port 1(rndis0) entered forwarding state [ 10.026993] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 10.027019] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 11.693949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.693971] Bluetooth: BNEP socket layer initialized [ 11.832046] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 12.152276] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 12.472295] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 12.760087] FAN rising trip_level:1 cur_temp:46000 trip_temps[2]:60000 [ 12.796254] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 13.112287] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 13.432857] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 13.641219] tegradc 15200000.nvdisplay: unblank [ 13.752277] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 14.072255] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 14.392194] snd_hda_codec_hdmi hdaudioC0D4: HDMI: Unknown ELD version 0 [ 34.135938] vdd-1v8-cvb: disabling [ 34.135975] vdd_sys_en: disabling [ 34.135981] sdcard_en: disabling [ 34.135986] vdd-sdmmc1-sw: disabling [ 34.135991] vdd-1v8-sd: disabling [ 34.135995] vdd-epb-1v0: disabling [ 34.136000] avdd-cam-2v8: disabling