[BEGIN] 2022/9/21 18:11:28 root@user-R5300-G5:/mnt/nvidia/Software# ./displaymodeselector --gpumode NVIDIA Display Mode Selector Utility (Version 1.48.0) Copyright (C) 2015-2020, NVIDIA Corporation. All Rights Reserved. WARNING: This operation updates the firmware on the board and could make the device unusable if your host system lacks the necessary support. Are you sure you want to continue? Press 'y' to confirm (any other key to abort): y Select a number: <0> physical_display_enabled_256MB_bar1 <1> physical_display_disabled <2> physical_display_enabled_8GB_bar1 Select a number (ESC to quit): 0 Specifed GPU Mode "physical_display_enabled_256MB_bar1" Update GPU Mode of all adapters to "physical_display_enabled_256MB_bar1"? Press 'y' to confirm or 'n' to choose adapters or any other key to abort: y Updating GPU Mode of all eligible adapters to "physical_display_enabled_256MB_bar1" Apply GPU Mode <5> corresponds to "physical_display_enabled_256MB_bar1" Adapter: Graphics Device (10DE,2235,10DE,145A) S:00,B:36,D:00,F:00 EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page NOTE: Preserving straps from original image. Storing updated firmware image... [==================================================] 100 % Verifying update... Update successful. Firmware image updated. - New version: 94.02.5C.00.03 - Old version: 94.02.5C.00.03 InfoROM image updated. - New version: G133.0200.00.05 - Old version: G133.0200.00.05 Successfully updated GPU mode to "physical_display_enabled_256MB_bar1" ( Mode 5 ). A reboot is required for the update to take effect. Apply GPU Mode <5> corresponds to "physical_display_enabled_256MB_bar1" Adapter: Graphics Device (10DE,2235,10DE,145A) S:00,B:3D,D:00,F:00 EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page NOTE: Preserving straps from original image. Storing updated firmware image... Error: PushPoll Cycle - NVF Writing Payload to uCode Timeout. Payload State: 00000004 Entire pushPollCtrl0: 68003C04 Error: PushPoll Cycle - NVF Writing Payload to uCode Timeout. Payload State: 00000004 Entire pushPollCtrl0: 68003C04 PAYLOAD_CMD_READ PAYLOAD_CMD_READ EEPROM programming failed. PROGRAMMING ERROR: EEPROM Program failed root@user-R5300-G5:/mnt/nvidia/Software# ./displaymodeselector --gpumode graphics NVIDIA Display Mode Selector Utility (Version 1.48.0) Copyright (C) 2015-2020, NVIDIA Corporation. All Rights Reserved. WARNING: This operation updates the firmware on the board and could make the device unusable if your host system lacks the necessary support. Are you sure you want to continue? Press 'y' to confirm (any other key to abort): y Specifed GPU Mode "physical_display_enabled_256MB_bar1" Update GPU Mode of all adapters to "physical_display_enabled_256MB_bar1"? Press 'y' to confirm or 'n' to choose adapters or any other key to abort: y Updating GPU Mode of all eligible adapters to "physical_display_enabled_256MB_bar1" Apply GPU Mode <5> corresponds to "physical_display_enabled_256MB_bar1" Adapter: Graphics Device (10DE,2235,10DE,145A) S:00,B:36,D:00,F:00 EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page NOTE: Preserving straps from original image. Storing updated firmware image... [==================================================] 100 % Verifying update... Update successful. Firmware image updated. - New version: 94.02.5C.00.03 - Old version: 94.02.5C.00.03 InfoROM image updated. - New version: G133.0200.00.05 - Old version: G133.0200.00.05 Successfully updated GPU mode to "physical_display_enabled_256MB_bar1" ( Mode 5 ). A reboot is required for the update to take effect. Apply GPU Mode <5> corresponds to "physical_display_enabled_256MB_bar1" Adapter: Graphics Device (10DE,2235,10DE,145A) S:00,B:3D,D:00,F:00 EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page NOTE: Preserving straps from original image. Storing updated firmware image... [==================================================] 100 % Verifying update... Update successful. Firmware image updated. - New version: 94.02.5C.00.03 - Old version: 94.02.5C.00.03 InfoROM image updated. - New version: G133.0200.00.05 - Old version: G133.0200.00.05 Successfully updated GPU mode to "physical_display_enabled_256MB_bar1" ( Mode 5 ). A reboot is required for the update to take effect. root@user-R5300-G5:/mnt/nvidia/Software# ./displaymodeselector --list NVIDIA Display Mode Selector Utility (Version 1.48.0) Copyright (C) 2015-2020, NVIDIA Corporation. All Rights Reserved. NVIDIA display adapters present in system: <0> Graphics Device (10DE,2235,10DE,145A) S:00,B:36,D:00,F:00 <1> Graphics Device (10DE,2235,10DE,145A) S:00,B:3D,D:00,F:00 root@user-R5300-G5:/mnt/nvidia/Software# ./displaymodeselector --gpumode graphics --auto NVIDIA Display Mode Selector Utility (Version 1.48.0) Copyright (C) 2015-2020, NVIDIA Corporation. All Rights Reserved. WARNING: This operation updates the firmware on the board and could make the device unusable if your host system lacks the necessary support. Specifed GPU Mode "physical_display_enabled_256MB_bar1" Apply GPU Mode <5> corresponds to "physical_display_enabled_256MB_bar1" Adapter: Graphics Device (10DE,2235,10DE,145A) S:00,B:36,D:00,F:00 EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page NOTE: Preserving straps from original image. Storing updated firmware image... [==================================================] 100 % Verifying update... Update successful. Firmware image updated. - New version: 94.02.5C.00.03 - Old version: 94.02.5C.00.03 InfoROM image updated. - New version: G133.0200.00.05 - Old version: G133.0200.00.05 Successfully updated GPU mode to "physical_display_enabled_256MB_bar1" ( Mode 5 ). A reboot is required for the update to take effect. Apply GPU Mode <5> corresponds to "physical_display_enabled_256MB_bar1" Adapter: Graphics Device (10DE,2235,10DE,145A) S:00,B:3D,D:00,F:00 EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page EEPROM ID (EF,6015) : WBond W25Q16FW/JW 1.65-1.95V 16384Kx1S, page NOTE: Preserving straps from original image. Storing updated firmware image... [==================================================] 100 % Verifying update... Update successful. Firmware image updated. - New version: 94.02.5C.00.03 - Old version: 94.02.5C.00.03 InfoROM image updated. - New version: G133.0200.00.05 - Old version: G133.0200.00.05 Successfully updated GPU mode to "physical_display_enabled_256MB_bar1" ( Mode 5 ). A reboot is required for the update to take effect. [END] 2022/9/21 18:16:45