[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5496-d5000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:13:06 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb4000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29692(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3560280K/4159488K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 124072K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001677] Console: colour dummy device 80x25 [ 0.001687] console [tty0] enabled [ 0.001694] bootconsole [uart8250] disabled [ 0.001716] kmemleak: Kernel memory leak detector disabled [ 0.001733] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001744] pid_max: default: 32768 minimum: 301 [ 0.002190] Security Framework initialized [ 0.002414] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002423] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003576] ftrace: allocating 47077 entries in 184 pages [ 0.172896] sched-energy: CPU device node has no sched-energy-costs [ 0.172930] ASID allocator initialised with 65536 entries [ 0.212009] tegra-id: chipid=22117. [ 0.212022] tegra-id: opt_subrevision=0. [ 0.212040] Tegra Speedo/IDDQ fuse revision 4 [ 0.212045] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212050] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.212057] Tegra: CPU Speedo Value 2075, SoC Speedo Value 2007, GPU Speedo Value 2078 [ 0.212061] Tegra: CPU IDDQ Value 2260, SoC IDDQ Value 2520, GPU IDDQ Value 2800 [ 0.212080] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.212097] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.212107] DTB Build time: Feb 17 2022 01:48:30 [ 0.261090] CPU1: Booted secondary processor [411fd071] [ 0.292983] CPU2: Booted secondary processor [411fd071] [ 0.324980] CPU3: Booted secondary processor [411fd071] [ 0.325067] Brought up 4 CPUs [ 0.325074] SMP: Total of 4 processors activated. [ 0.325082] CPU features: detected feature: 32-bit EL0 Support [ 0.325343] CPU: All CPU(s) started at EL2 [ 0.325363] alternatives: patching kernel code [ 0.333787] devtmpfs: initialized [ 0.372346] Initilizing CustomIPI irq domain [ 0.372664] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372687] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384139] pinctrl core: initialized pinctrl subsystem [ 0.384766] OS set in device tree is not L4T. [ 0.385259] regulator-dummy: no parameters [ 0.385528] Initializing plugin-manager [ 0.385688] Plugin module not found [ 0.385878] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.386380] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.386797] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.387499] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.387699] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.388294] node /plugin-manager/fragement@13 match with board >=3448-0002-300 [ 0.392007] NET: Registered protocol family 16 [ 0.393386] pstore: using zlib compression [ 0.393432] console [pstore-1] enabled [ 0.393436] pstore: Registered ramoops as persistent store backend [ 0.393441] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405103] cpuidle: using governor menu [ 0.409320] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.411020] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.411042] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413696] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.416093] Serial: AMBA PL011 UART driver [ 0.416596] tegra_powergate_init: DONE [ 0.416610] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.416618] DTB Build time: Feb 17 2022 01:48:30 [ 0.418495] Tegra reboot handler registered. [ 0.423106] iommu: Adding device tegra-carveouts to group 0 [ 0.423246] platform tegra-carveouts: domain=ffffffc0f9bdf3d8 allocates as[0]=ffffffc0f94280a8 [ 0.423624] iommu: Adding device smmu_test to group 1 [ 0.423673] platform smmu_test: domain=ffffffc0f9bdf618 allocates as[0]=ffffffc0f9428110 [ 0.424519] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.424571] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.424628] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.424637] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.424659] mc-err: mcerr ops are set to t21x [ 0.435700] iommu: Adding device 70090000.xusb to group 2 [ 0.435984] iommu: Adding device 70006000.serial to group 3 [ 0.436058] platform 70006000.serial: domain=ffffffc0f94c5558 allocates as[0]=ffffffc0f9428178 [ 0.436513] iommu: Adding device 70006040.serial to group 4 [ 0.436796] iommu: Adding device 70006200.serial to group 5 [ 0.437052] iommu: Adding device sound to group 6 [ 0.437105] platform sound: domain=ffffffc0f94c5a98 allocates as[0]=ffffffc0f94281e0 [ 0.437679] iommu: Adding device 7000d400.spi to group 7 [ 0.437938] iommu: Adding device 7000d600.spi to group 8 [ 0.438283] iommu: Adding device 50000000.host1x to group 9 [ 0.438559] iommu: Adding device 54080000.vi to group 10 [ 0.438959] iommu: Adding device 54600000.isp to group 11 [ 0.439220] iommu: Adding device 54680000.isp to group 12 [ 0.439533] iommu: Adding device tegradc.0 to group 13 [ 0.439588] platform tegradc.0: domain=ffffffc0f94cf858 allocates as[0]=ffffffc0f9428248 [ 0.443820] platform tegradc.0: IOVA linear map 0x0000000092cb4000(800000) [ 0.444216] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.444576] iommu: Adding device tegradc.1 to group 14 [ 0.444628] platform tegradc.1: domain=ffffffc0f94cfa98 allocates as[0]=ffffffc0f94282b0 [ 0.448826] platform tegradc.1: IOVA linear map 0x0000000092cb4000(800000) [ 0.449229] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.449476] iommu: Adding device 54340000.vic to group 15 [ 0.449676] iommu: Adding device 544c0000.nvenc to group 16 [ 0.449880] iommu: Adding device 54500000.tsec to group 17 [ 0.450085] iommu: Adding device 54100000.tsecb to group 18 [ 0.450287] iommu: Adding device 54480000.nvdec to group 19 [ 0.450504] iommu: Adding device 54380000.nvjpg to group 20 [ 0.451568] iommu: Adding device 546c0000.i2c to group 21 [ 0.451893] iommu: Adding device 57000000.gpu to group 22 [ 0.451943] platform 57000000.gpu: domain=ffffffc0f9508a98 allocates as[0]=ffffffc0f9428318 [ 0.451982] platform 57000000.gpu: domain=ffffffc0f9508a98 allocates as[1]=ffffffc0f9428380 [ 0.452024] platform 57000000.gpu: domain=ffffffc0f9508a98 allocates as[2]=ffffffc0f94283e8 [ 0.452065] platform 57000000.gpu: domain=ffffffc0f9508a98 allocates as[3]=ffffffc0f9428450 [ 0.452969] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.453011] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.453025] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.453028] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.453031] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.505161] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.505168] tegra-pmc: Clear bootloader IO dpd settings [ 0.505188] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.505252] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.505553] iommu: Adding device 70012000.se to group 23 [ 0.506425] iommu: Adding device 7000c000.i2c to group 24 [ 0.506691] iommu: Adding device 7000c400.i2c to group 25 [ 0.507009] iommu: Adding device 7000c500.i2c to group 26 [ 0.507300] iommu: Adding device 7000c700.i2c to group 27 [ 0.507610] iommu: Adding device 7000d000.i2c to group 28 [ 0.507865] iommu: Adding device 7000d100.i2c to group 29 [ 0.508203] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.508263] platform sdhci-tegra.3: domain=ffffffc0f9573c18 allocates as[0]=ffffffc0f94284b8 [ 0.508710] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.508759] platform sdhci-tegra.2: domain=ffffffc0f9573e58 allocates as[0]=ffffffc0f9428520 [ 0.509784] iommu: Adding device 700d0000.xudc to group 32 [ 0.513448] vdd-ac-bat: 5000 mV [ 0.513843] vdd-5v0-sys: 5000 mV [ 0.514589] vdd-5v0-hdmi: 5000 mV [ 0.515032] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.515292] vdd-1v8-sys: 1800 mV [ 0.515664] vdd-fan: 5000 mV [ 0.515938] vdd-fan: supplied by vdd-5v0-sys [ 0.516161] vdd-usb-vbus: 5000 mV [ 0.516379] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.516727] vdd-usb-vbus2: 5000 mV [ 0.550210] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.552544] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.554369] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.554400] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.554420] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.554780] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.563007] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.563357] SCSI subsystem initialized [ 0.563565] libata version 3.00 loaded. [ 0.563900] usbcore: registered new interface driver usbfs [ 0.563959] usbcore: registered new interface driver hub [ 0.564003] usbcore: registered new device driver usb [ 0.568070] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.572362] random: fast init done [ 0.572380] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.573433] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.576423] vdd-ddr-1v1: 1150 mV [ 0.581105] vdd-pre-reg-1v35: 1350 mV [ 0.585105] vdd-1v8: 1800 mV [ 0.589102] avdd-sys-1v2: 1200 mV [ 0.593104] vdd-pex-1v0: 1050 mV [ 0.593728] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.594260] max77620-ldo3: at 3100 mV [ 0.597105] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.597650] max77620-ldo5: at 3100 mV [ 0.601107] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.605102] avdd-1v05-pll: 1050 mV [ 0.609102] avdd-io-hdmi-dp: 1050 mV [ 0.611737] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.612027] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.612312] max77620 4-003c: max77620 probe successful [ 0.615113] media: Linux media interface: v0.10 [ 0.615169] Linux video capture interface: v2.00 [ 0.616117] pps_core: LinuxPPS API ver. 1 registered [ 0.616123] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.616142] PTP clock support registered [ 0.619432] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.620351] Advanced Linux Sound Architecture Driver Initialized. [ 0.621000] Bluetooth: Core ver 2.22 [ 0.621048] NET: Registered protocol family 31 [ 0.621052] Bluetooth: HCI device and connection manager initialized [ 0.621066] Bluetooth: HCI socket layer initialized [ 0.621074] Bluetooth: L2CAP socket layer initialized [ 0.621125] Bluetooth: SCO socket layer initialized [ 0.622921] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.622937] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.622987] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.623003] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.626496] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.627635] vdd-3v3-sys: 3300 mV [ 0.628012] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.628061] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.633083] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.633520] vdd-3v3-sd: 3300 mV [ 0.633911] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.634653] avdd-io-edp-1v05: 1050 mV [ 0.635002] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.635166] vdd-usb-hub-en: 5000 mV [ 0.635522] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.636978] camchar: rtcpu character device driver loaded [ 0.637728] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.639139] clocksource: Switched to clocksource arch_sys_counter [ 0.679863] VFS: Disk quotas dquot_6.6.0 [ 0.679997] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.680497] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.680958] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.680976] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.681187] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.681193] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.681205] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.681240] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.681246] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.681267] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.681278] nvmap_page_pool_init: Total RAM pages: 1008854 [ 0.681283] nvmap_page_pool_init: nvmap page pool size: 126106 pages (492 MB) [ 0.681400] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.681803] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.682585] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.693019] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.693463] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.693831] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.694099] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.694284] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.694566] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.694570] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.695001] NET: Registered protocol family 2 [ 0.696098] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.696313] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.696854] TCP: Hash tables configured (established 32768 bind 32768) [ 0.697008] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.697087] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.697505] NET: Registered protocol family 1 [ 0.698127] RPC: Registered named UNIX socket transport module. [ 0.698135] RPC: Registered udp transport module. [ 0.698139] RPC: Registered tcp transport module. [ 0.698143] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.698157] PCI: CLS 0 bytes, default 64 [ 0.698392] Trying to unpack rootfs image as initramfs... [ 1.004497] Freeing initrd memory: 6992K [ 1.014527] host1x 50000000.host1x: initialized [ 1.016524] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.019938] audit: initializing netlink subsys (disabled) [ 1.020038] audit: type=2000 audit(0.871:1): initialized [ 1.020736] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.030600] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.032147] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.032956] 9p: Installing v9fs 9p2000 file system support [ 1.036378] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.036497] io scheduler noop registered [ 1.036801] io scheduler cfq registered (default) [ 1.039623] gic 702f9000.agic: GIC IRQ controller registered [ 1.042571] iommu: Adding device 702ef000.adsp to group 33 [ 1.051937] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 1.052137] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.052791] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x71c840d [ 1.052799] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.054430] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.054546] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.054639] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.054836] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.054930] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.055017] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.055107] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.055262] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.055355] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.055439] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.061701] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.063408] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.065357] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.066647] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.067006] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.068463] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.068683] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.068947] Adding domain tsec-pd to PM domain host1x-pd [ 1.071336] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.072283] tsec 54500000.tsec: initialized [ 1.073899] tsec 54100000.tsecb: initialized [ 1.074649] Adding domain nvdec-pd to PM domain host1x-pd [ 1.078223] nvdec 54480000.nvdec: initialized [ 1.079340] Adding domain vic03-pd to PM domain host1x-pd [ 1.079538] Adding domain msenc-pd to PM domain host1x-pd [ 1.079703] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.083944] falcon 54340000.vic: initialized [ 1.085243] falcon 544c0000.nvenc: initialized [ 1.086587] falcon 54380000.nvjpg: initialized [ 1.091270] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.091314] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.091344] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.091479] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.091577] display board info: id 0x0, fab 0x0 [ 1.091636] generic_infoframe_type: 0x87 [ 1.091647] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.091652] tegra_cec 70015000.tegra_cec: probed [ 1.091789] tegradc tegradc.0: DT parsed successfully [ 1.091844] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.092372] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.099857] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.100309] tegradc tegradc.0: probed [ 1.106756] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.108203] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.108212] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.108667] kfuse 7000fc00.kfuse: initialized [ 1.110167] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.111364] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.112842] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.112859] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.113412] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.115102] vdd-gpu: applied init 1000000uV constraint [ 1.115110] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.115621] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.120868] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.121040] No Device Node present for smmu client: serial8250 !! [ 1.121054] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.121117] iommu: Adding device serial8250 to group 35 [ 1.125163] console [ttyS0] disabled [ 1.125390] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.125584] console [ttyS0] enabled [ 1.126782] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.127072] serial-tegra 70006200.serial: RX in PIO mode [ 1.127211] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.128226] [drm] Initialized [ 1.132339] Console: switching to colour frame buffer device 240x67 [ 1.132466] tegradc tegradc.0: fb registered [ 1.139743] brd: module loaded [ 1.139876] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.139933] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.140474] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.140487] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.145315] loop: module loaded [ 1.145411] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.145533] tegra_profiler: auth: init [ 1.146904] THERMAL EST: found 2 subdevs [ 1.146914] THERMAL EST num_resources: 0 [ 1.146922] [THERMAL EST subdev 0] [ 1.146930] [THERMAL EST subdev 1] [ 1.147488] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.147492] THERMAL EST: thz register success. [ 1.147657] THERMAL EST: end of probe, return err: 0 [ 1.148960] sd: No Scsi addr parsed to reserve index [ 1.148998] hisi_sas: driver version v1.6 [ 1.156282] libphy: Fixed MDIO Bus: probed [ 1.157169] tun: Universal TUN/TAP device driver, 1.6 [ 1.157223] tun: (C) 1999-2004 Max Krasnyansky [ 1.158340] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.158347] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.158405] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.158408] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.158463] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.158468] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.158521] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.158524] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.159803] PPP generic driver version 2.4.2 [ 1.160027] PPP BSD Compression module registered [ 1.160033] PPP Deflate Compression module registered [ 1.160074] PPP MPPE Compression module registered [ 1.160081] NET: Registered protocol family 24 [ 1.160159] usbcore: registered new interface driver r8152 [ 1.160210] usbcore: registered new interface driver asix [ 1.160263] usbcore: registered new interface driver ax88179_178a [ 1.160301] usbcore: registered new interface driver cdc_ether [ 1.160340] usbcore: registered new interface driver net1080 [ 1.160382] usbcore: registered new interface driver cdc_subset [ 1.160422] usbcore: registered new interface driver zaurus [ 1.160477] usbcore: registered new interface driver cdc_ncm [ 1.160650] VFIO - User Level meta-driver version: 0.3 [ 1.162007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.162033] ehci-pci: EHCI PCI platform driver [ 1.162079] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.162093] ohci-pci: OHCI PCI platform driver [ 1.162134] ohci-platform: OHCI generic platform driver [ 1.165064] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.165697] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.166801] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.166809] Extcon AUX1(HDMI) enable [ 1.166996] tegra-xusb 70090000.xusb: extcon 0: ffffffc0fa5d3800 id [ 1.167946] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.168062] tegradc tegradc.1: No lt-data, using default setting [ 1.168095] tegradc tegradc.1: No hpd-gpio in DT [ 1.168133] tegradc tegradc.1: DT parsed successfully [ 1.168185] tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1 [ 1.170133] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.170165] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.170224] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.170255] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.171051] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.171104] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.171357] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.171363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.171369] usb usb1: Product: xHCI Host Controller [ 1.171373] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.171378] usbcore: registered new interface driver uas [ 1.171380] usb usb1: SerialNumber: 70090000.xusb [ 1.171470] usbcore: registered new interface driver usb-storage [ 1.171636] usbcore: registered new interface driver usbserial [ 1.172353] hub 1-0:1.0: USB hub found [ 1.172458] hub 1-0:1.0: 5 ports detected [ 1.173109] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.173124] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.173240] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.173329] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.173335] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.173339] usb usb2: Product: xHCI Host Controller [ 1.173342] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.173346] usb usb2: SerialNumber: 70090000.xusb [ 1.173994] hub 2-0:1.0: USB hub found [ 1.174041] hub 2-0:1.0: 4 ports detected [ 1.175047] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.175053] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.176127] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.177871] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.177887] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.178416] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.178692] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.181439] mousedev: PS/2 mouse device common for all mice [ 1.181554] usbcore: registered new interface driver xpad [ 1.182985] tegradc tegradc.1: probed [ 1.183375] tegradc tegradc.1: fb registered [ 1.187028] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.187036] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.187045] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.187062] tegradc tegradc.1: blank - powerdown [ 1.187082] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.187087] Extcon DP: HPD disabled [ 1.187090] hpd: hpd_switch 0 [ 1.187094] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.187103] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.187110] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.206035] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.275263] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.275466] usb usb2: usb_suspend_both: status 0 [ 1.298585] tegradc tegradc.0: blank - powerdown [ 1.312248] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.314377] rtc rtc1: alarm rtc device [ 1.314390] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.314407] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.314774] i2c /dev entries driver [ 1.316379] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.316686] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.316691] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.317232] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.340523] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.340603] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.340670] imx219 7-0010: board setup failed [ 1.340720] imx219: probe of 7-0010 failed with error -121 [ 1.341163] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.343390] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.343392] Extcon AUX1(HDMI) disable [ 1.364472] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.364554] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.364647] imx219 8-0010: board setup failed [ 1.364720] imx219: probe of 8-0010 failed with error -121 [ 1.366263] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.369284] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.369289] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.369826] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.369843] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.369852] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.369997] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.370008] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.370015] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.370163] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.370174] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.370180] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.370361] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.371352] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.371411] tegra_aotag tegra-aotag: Invalid temp readout [ 1.371438] tegra_aotag tegra-aotag: Invalid temp readout [ 1.371455] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.371463] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.372586] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.372607] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.372862] tegra_aotag tegra-aotag: Invalid temp readout [ 1.372890] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.373407] parse_throttle_dt_data: Num cap clks = 6 [ 1.373413] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.373428] parse_throttle_dt_data: clk=gpu type=4 [ 1.373453] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.373475] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.373499] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.373502] parse_throttle_dt_data: clk=emc type=3 [ 1.374033] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.374203] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.374414] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.375330] tegradc tegradc.0: unblank [ 1.375433] FAN dev name: pwm-fan [ 1.375513] FAN:gpio request success. [ 1.375572] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.375917] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.376095] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.376105] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.376214] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.376219] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.376224] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.376228] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.376232] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.376236] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.376240] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.376244] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.376248] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.376252] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.379557] device-mapper: uevent: version 1.0.3 [ 1.380135] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.385196] tegra210-cpufreq cpufreq: probe()...completed [ 1.386043] sdhci: Secure Digital Host Controller Interface driver [ 1.386044] sdhci: Copyright(c) Pierre Ossman [ 1.386045] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.386462] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.390893] sdhci-tegra sdhci-tegra.2: Got CD GPIO [ 1.391490] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 1.393884] tegra-se 70012000.se: tegra_se_probe: complete [ 1.394408] hidraw: raw HID events driver (C) Jiri Kosina [ 1.395583] usbcore: registered new interface driver usbhid [ 1.395585] usbhid: USB HID core driver [ 1.397761] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.397931] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.400007] nvpmodel: initialized successfully [ 1.400959] usbcore: registered new interface driver snd-usb-audio [ 1.401011] No Device Node present for smmu client: snd-soc-dummy !! [ 1.401015] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.401032] iommu: Adding device snd-soc-dummy to group 36 [ 1.413059] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.419554] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.419614] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 1.420010] OPE platform probe [ 1.420096] OPE platform probe successful [ 1.420356] OPE platform probe [ 1.420441] OPE platform probe successful [ 1.420638] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.427216] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.443468] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 1.444684] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.444847] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.444973] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.445097] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.445231] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.445356] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.445484] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.445607] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.445733] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.445895] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.455419] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.455421] Extcon AUX1(HDMI) enable [ 1.464419] u32 classifier [ 1.464420] Actions configured [ 1.464488] Initializing XFRM netlink socket [ 1.465205] NET: Registered protocol family 10 [ 1.465849] NET: Registered protocol family 17 [ 1.465859] NET: Registered protocol family 15 [ 1.465930] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.465973] Bluetooth: RFCOMM socket layer initialized [ 1.465982] Bluetooth: RFCOMM ver 1.11 [ 1.465986] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.465990] Bluetooth: HIDP socket layer initialized [ 1.466008] 9pnet: Installing 9P2000 support [ 1.466040] Key type dns_resolver registered [ 1.466441] Registered cp15_barrier emulation handler [ 1.466447] Registered setend emulation handler [ 1.467585] registered taskstats version 1 [ 1.468114] Adding domain ve2-pd to PM domain host1x-pd [ 1.468363] Adding domain ve-pd to PM domain host1x-pd [ 1.470447] isp 54600000.isp: initialized [ 1.470851] tegradc tegradc.0: sync windows ret = 247 [ 1.471501] isp 54680000.isp: initialized [ 1.482182] last reset is due to power on reset [ 1.482185] KERNEL: PMC reset status reg: 0x0 [ 1.482245] BL: PMC reset status reg: 0x0 [ 1.482247] BL: PMIC poweroff Event Recorder: 0x40 [ 1.482697] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.483112] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.483669] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.483886] clk_cbus_recalc_rate: no gbus parent [ 1.483890] clk_cbus_round_rate: no gbus parent [ 1.483892] clk_cbus_round_rate: no gbus parent [ 1.483898] clk_cbus_recalc_rate: no gbus parent [ 1.483994] clk_cbus_recalc_rate: no gbus parent [ 1.483996] clk_cbus_round_rate: no gbus parent [ 1.483998] clk_cbus_round_rate: no gbus parent [ 1.484001] clk_cbus_recalc_rate: no gbus parent [ 1.484669] tegra_dvfs: GPU-cap: registered [ 1.484723] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.484725] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.484727] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.486092] tegra_dvfs: vdd-gpu-vts: registered [ 1.486779] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.487406] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.488024] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.488219] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.488485] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.490953] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.507145] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 1.509261] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.519108] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.519110] Extcon HDMI: HPD enabled [ 1.519134] tegradc tegradc.0: hdmi: plugged [ 1.519888] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:10 UTC (946688410) [ 1.521268] vi 54080000.vi: vi_probe: ++ [ 1.524064] vi 54080000.vi: initialized [ 1.526140] vi 54080000.vi: subdev nvcsi--2 bound [ 1.526249] vi 54080000.vi: subdev nvcsi--1 bound [ 1.526478] mmcblk mmc0:0001: Card claimed for testing. [ 1.527849] Disable partitions left on by BL [ 1.527852] disb [ 1.527899] bwmgr: missing cdev-type property [ 1.527995] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.528002] DRAM derating cdev registered. [ 1.528874] ALSA device list: [ 1.528877] #0: tegra-hda at 0x70038000 irq 82 [ 1.528879] #1: tegra-snd-t210ref-mobile-rt565x [ 1.532027] Freeing unused kernel memory: 8640K [ 1.541520] usb 1-3: New USB device found, idVendor=13fe, idProduct=5500 [ 1.541527] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.541530] usb 1-3: Product: Patriot Memory [ 1.541533] usb 1-3: Manufacturer: [ 1.541536] usb 1-3: SerialNumber: 07015AC74C048117 [ 1.542353] usb-storage 1-3:1.0: USB Mass Storage device detected [ 1.542531] scsi host0: usb-storage 1-3:1.0 [ 1.557531] Root device found: mmcblk0p1 [ 1.558945] Found dev node: /dev/mmcblk0p1 [ 1.620761] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.823812] EXT4-fs (mmcblk0p1): 11 orphan inodes deleted [ 1.823816] EXT4-fs (mmcblk0p1): recovery complete [ 1.845346] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.847271] Rootfs mounted over mmcblk0p1 [ 1.860360] Switching from initrd to actual rootfs [ 1.912604] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.945491] systemd[1]: System time before build time, advancing clock. [ 1.960360] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.971738] cgroup: cgroup2: unknown option "nsdelegate" [ 1.985416] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.986192] systemd[1]: Detected architecture arm64. [ 2.009397] systemd[1]: Set hostname to . [ 2.086157] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.086166] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.099193] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.163711] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.163716] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.182420] random: systemd: uninitialized urandom read (16 bytes read) [ 2.182452] systemd[1]: Reached target Swap. [ 2.182648] random: systemd: uninitialized urandom read (16 bytes read) [ 2.182669] systemd[1]: Reached target User and Group Name Lookups. [ 2.182696] random: systemd: uninitialized urandom read (16 bytes read) [ 2.184265] systemd[1]: Created slice User and Session Slice. [ 2.184442] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.185253] systemd[1]: Created slice System Slice. [ 2.227857] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.321170] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.323160] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.329902] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.428832] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.428839] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.428843] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.428847] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.428852] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.428874] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.428937] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.429098] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.429218] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.429242] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.429272] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.429292] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.429418] pci 0000:01:00.0: supports D1 D2 [ 2.429421] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.439206] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.439241] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.439246] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.439252] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.439271] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.439287] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.439295] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.439299] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.439305] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.439577] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.439581] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.439587] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.439684] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.439870] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.439886] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.461946] systemd-journald[2018]: Received request to flush runtime journal from PID 1 [ 2.463653] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.463726] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ea:6a:3a from device tree [ 2.464215] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.464230] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.552490] scsi 0:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 6 [ 3.008377] using random self ethernet address [ 3.020579] using random host ethernet address [ 3.129390] sd 0:0:0:0: [sda] 61833216 512-byte logical blocks: (31.7 GB/29.5 GiB) [ 3.138416] sd 0:0:0:0: [sda] Write Protect is off [ 3.143299] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 3.144567] sd 0:0:0:0: [sda] No Caching mode page found [ 3.149985] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.159759] sda: sda1 [ 3.163273] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.585353] random: crng init done [ 3.588786] random: 7 urandom warning(s) missed due to ratelimiting [ 3.784494] Mass Storage Function, version: 2009/09/11 [ 3.784501] LUN: removable file: (no medium) [ 3.789849] using random self ethernet address [ 3.809791] using random host ethernet address [ 3.935494] rndis0: HOST MAC 6e:a2:04:fe:db:f0 [ 3.936289] rndis0: MAC 6e:a2:04:fe:db:f1 [ 3.937684] usb0: HOST MAC 6e:a2:04:fe:db:f2 [ 3.937720] usb0: MAC 6e:a2:04:fe:db:f3 [ 3.937739] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 3.938358] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 3.938378] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.938414] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.938644] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.938668] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 3.939329] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 3.939343] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.939643] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.954056] l4tbr0: port 1(rndis0) entered blocking state [ 3.954061] l4tbr0: port 1(rndis0) entered disabled state [ 3.954426] device rndis0 entered promiscuous mode [ 3.965579] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.971538] l4tbr0: port 2(usb0) entered blocking state [ 3.971543] l4tbr0: port 2(usb0) entered disabled state [ 3.972013] device usb0 entered promiscuous mode [ 3.978038] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.199360] zram: Added device: zram0 [ 4.207363] zram: Added device: zram1 [ 4.212064] zram: Added device: zram2 [ 4.216029] zram: Added device: zram3 [ 4.271028] zram0: detected capacity change from 0 to 518537216 [ 4.308865] Adding 506380k swap on /dev/zram0. Priority:5 extents:1 across:506380k SS [ 4.314537] zram1: detected capacity change from 0 to 518537216 [ 4.330738] Adding 506380k swap on /dev/zram1. Priority:5 extents:1 across:506380k SS [ 4.338242] zram2: detected capacity change from 0 to 518537216 [ 4.358582] Adding 506380k swap on /dev/zram2. Priority:5 extents:1 across:506380k SS [ 4.374887] zram3: detected capacity change from 0 to 518537216 [ 4.385931] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.390573] eth0: 0xffffff800ac03000, 00:04:4b:ea:6a:3a, IRQ 407 [ 4.397260] Adding 506380k swap on /dev/zram3. Priority:5 extents:1 across:506380k SS [ 4.536319] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.602958] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.602984] cpu-throttle-alert cooling device registered. [ 4.603190] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.603211] gpu-throttle-alert cooling device registered. [ 4.603399] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.603413] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.603426] hot-surface-alert cooling device registered. [ 5.179760] Bridge firewalling registered [ 5.213145] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.605324] tegradc tegradc.0: unblank [ 5.605334] tegradc tegradc.1: blank - powerdown [ 5.672603] Netfilter messages via NETLINK v0.30. [ 5.680891] ctnetlink v0.93: registering with nfnetlink. [ 5.954262] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 6.854354] fuse init (API version 7.26) [ 9.064878] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.064889] Bluetooth: BNEP socket layer initialized [ 9.651661] r8168: eth0: link up [ 9.651735] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.856286] tegradc tegradc.0: unblank [ 9.856296] tegradc tegradc.1: blank - powerdown [ 12.477770] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 12.806699] mmc1: Data timeout error [ 12.810274] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 12.816100] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 12.821924] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 12.827748] sdhci: Argument: 0x80fffff3 | Trn mode: 0x00000013 [ 12.833571] sdhci: Present: 0x01fb0000 | Host ctl: 0x00000013 [ 12.839394] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 12.845217] sdhci: Wake-up: 0x00000000 | Clock: 0x00000407 [ 12.851039] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 12.856863] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 12.862686] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 12.868509] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f77 [ 12.874331] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 12.880151] sdhci: Host ctl2: 0x00003008 [ 12.884070] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 12.890637] sdhci: =========================================== [ 12.896631] mmc1: error -110 whilst initialising SD card [ 12.994823] mmc1: host does not support reading read-only switch, assuming write-enable [ 17.433011] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 17.699208] usb 1-2: new full-speed USB device number 3 using tegra-xusb [ 17.723284] usb 1-2: New USB device found, idVendor=0b95, idProduct=6804 [ 17.723290] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 17.723294] usb 1-2: Product: AX68004 [ 17.723297] usb 1-2: Manufacturer: ASIX Electronics [ 17.723300] usb 1-2: SerialNumber: 00000001 [ 17.724448] hub 1-2:1.0: USB hub found [ 17.724871] hub 1-2:1.0: 7 ports detected [ 18.019679] usb 1-2.1: new full-speed USB device number 4 using tegra-xusb [ 18.057303] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c534 [ 18.057354] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 18.057392] usb 1-2.1: Product: USB Receiver [ 18.057427] usb 1-2.1: Manufacturer: Logitech [ 18.068146] input: Logitech USB Receiver as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C534.0001/input/input2 [ 18.129188] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-70090000.xusb-2.1/input0 [ 18.133572] input: Logitech USB Receiver as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C534.0002/input/input3 [ 18.192727] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-70090000.xusb-2.1/input1 [ 24.189812] mmc1: Data timeout error [ 24.193431] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 24.199290] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 24.205142] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 24.210992] sdhci: Argument: 0x80fffff0 | Trn mode: 0x00000013 [ 24.216842] sdhci: Present: 0x01fb0000 | Host ctl: 0x00000013 [ 24.222691] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 24.228541] sdhci: Wake-up: 0x00000000 | Clock: 0x00000607 [ 24.234390] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 24.240255] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 24.246113] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 24.251962] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f77 [ 24.257811] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 24.263656] sdhci: Host ctl2: 0x00003008 [ 24.267602] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 24.274204] sdhci: =========================================== [ 24.281460] mmc1: error -110 whilst initialising SD card [ 24.391101] mmc1: host does not support reading read-only switch, assuming write-enable [ 31.861650] vdd-fan: disabling [ 31.861691] vdd-usb-vbus: disabling [ 31.861721] vdd-usb-vbus2: disabling [ 31.861799] vddio-sdmmc-ap: disabling [ 31.862470] vdd-3v3-sd: disabling [ 31.862510] avdd-io-edp-1v05: disabling [ 31.862541] vdd-usb-hub-en: disabling [ 35.586536] mmc1: Data timeout error [ 35.590198] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 35.596099] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 35.601983] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 35.607867] sdhci: Argument: 0x80fffff0 | Trn mode: 0x00000013 [ 35.613747] sdhci: Present: 0x01fb0000 | Host ctl: 0x00000013 [ 35.619630] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 35.625510] sdhci: Wake-up: 0x00000000 | Clock: 0x00000807 [ 35.631392] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 35.637272] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 35.643152] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 35.649036] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f77 [ 35.654916] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 35.660791] sdhci: Host ctl2: 0x00003008 [ 35.664767] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 35.671413] sdhci: =========================================== [ 35.679083] mmc1: error -110 whilst initialising SD card [ 35.819350] mmc1: host does not support reading read-only switch, assuming write-enable [ 47.016465] mmc1: Data timeout error [ 47.020048] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 47.025897] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 47.031769] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 47.037634] sdhci: Argument: 0x80fffff0 | Trn mode: 0x00000013 [ 47.043483] sdhci: Present: 0x01fb0000 | Host ctl: 0x00000013 [ 47.049331] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 47.055198] sdhci: Wake-up: 0x00000000 | Clock: 0x00001007 [ 47.061079] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 47.066960] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 47.072839] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 47.078720] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f77 [ 47.084598] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 47.090473] sdhci: Host ctl2: 0x00003008 [ 47.094448] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 47.101090] sdhci: =========================================== [ 47.108920] mmc1: error -110 whilst initialising SD card