[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3456) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:25:44 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb3000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29340(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3570288K/4159488K available (15294K kernel code, 2934K rwdata, 6640K rodata, 8576K init, 609K bss, 114064K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001722] Console: colour dummy device 80x25 [ 0.001730] console [tty0] enabled [ 0.001737] bootconsole [uart8250] disabled [ 0.001755] kmemleak: Kernel memory leak detector disabled [ 0.001774] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001786] pid_max: default: 32768 minimum: 301 [ 0.002231] Security Framework initialized [ 0.002453] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002462] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003562] ftrace: allocating 47104 entries in 185 pages [ 0.171535] sched-energy: CPU device node has no sched-energy-costs [ 0.171570] ASID allocator initialised with 65536 entries [ 0.207896] tegra-id: chipid=22117. [ 0.207908] tegra-id: opt_subrevision=0. [ 0.207925] Tegra Speedo/IDDQ fuse revision 4 [ 0.207929] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.207933] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.207939] Tegra: CPU Speedo Value 2045, SoC Speedo Value 1957, GPU Speedo Value 2061 [ 0.207943] Tegra: CPU IDDQ Value 1800, SoC IDDQ Value 2232, GPU IDDQ Value 2650 [ 0.207961] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.207977] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.207985] DTB Build time: Jun 25 2020 21:31:08 [ 0.257055] CPU1: Booted secondary processor [411fd071] [ 0.288955] CPU2: Booted secondary processor [411fd071] [ 0.320937] CPU3: Booted secondary processor [411fd071] [ 0.321027] Brought up 4 CPUs [ 0.321034] SMP: Total of 4 processors activated. [ 0.321042] CPU features: detected feature: 32-bit EL0 Support [ 0.321303] CPU: All CPU(s) started at EL2 [ 0.321321] alternatives: patching kernel code [ 0.329376] devtmpfs: initialized [ 0.366296] Initilizing CustomIPI irq domain [ 0.366675] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.366696] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.377199] pinctrl core: initialized pinctrl subsystem [ 0.377835] OS set in device tree is not L4T. [ 0.378273] regulator-dummy: no parameters [ 0.378545] Initializing plugin-manager [ 0.378655] Plugin module not found [ 0.378890] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.379430] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.380488] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [ 0.380972] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [ 0.381669] node /plugin-manager/fragement@10 match with board >=3448-0000-300 [ 0.383782] node /plugin-manager/fragement@11 match with board >=3448-0000-300 [ 0.387243] NET: Registered protocol family 16 [ 0.388572] pstore: using zlib compression [ 0.388614] console [pstore-1] enabled [ 0.388618] pstore: Registered ramoops as persistent store backend [ 0.388625] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405072] cpuidle: using governor menu [ 0.409227] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.410986] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.411008] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413525] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.415841] Serial: AMBA PL011 UART driver [ 0.416317] tegra_powergate_init: DONE [ 0.416334] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-b00.dts [ 0.416344] DTB Build time: Jun 25 2020 21:31:08 [ 0.418182] Tegra reboot handler registered. [ 0.422745] iommu: Adding device tegra-carveouts to group 0 [ 0.422884] platform tegra-carveouts: domain=ffffffc0f9b8b3d8 allocates as[0]=ffffffc0f94380a8 [ 0.423231] iommu: Adding device smmu_test to group 1 [ 0.423279] platform smmu_test: domain=ffffffc0f9b8b618 allocates as[0]=ffffffc0f9438110 [ 0.424081] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.424139] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.424190] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.424198] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.424220] mc-err: mcerr ops are set to t21x [ 0.433699] iommu: Adding device 70090000.xusb to group 2 [ 0.434004] iommu: Adding device 70006000.serial to group 3 [ 0.434066] platform 70006000.serial: domain=ffffffc0f9440cd8 allocates as[0]=ffffffc0f9438178 [ 0.434474] iommu: Adding device 70006040.serial to group 4 [ 0.434728] iommu: Adding device 70006200.serial to group 5 [ 0.434919] iommu: Adding device sound to group 6 [ 0.434967] platform sound: domain=ffffffc0f94ba258 allocates as[0]=ffffffc0f94381e0 [ 0.435511] iommu: Adding device 7000d400.spi to group 7 [ 0.435773] iommu: Adding device 7000d600.spi to group 8 [ 0.436071] iommu: Adding device 70410000.spi to group 9 [ 0.436370] iommu: Adding device 50000000.host1x to group 10 [ 0.436645] iommu: Adding device 54080000.vi to group 11 [ 0.437072] iommu: Adding device 54600000.isp to group 12 [ 0.437340] iommu: Adding device 54680000.isp to group 13 [ 0.437607] iommu: Adding device tegradc.0 to group 14 [ 0.437654] platform tegradc.0: domain=ffffffc0f94c6198 allocates as[0]=ffffffc0f9438248 [ 0.438177] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.438494] iommu: Adding device tegradc.1 to group 15 [ 0.438538] platform tegradc.1: domain=ffffffc0f94c63d8 allocates as[0]=ffffffc0f94382b0 [ 0.439042] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.439302] iommu: Adding device 54340000.vic to group 16 [ 0.439506] iommu: Adding device 544c0000.nvenc to group 17 [ 0.439689] iommu: Adding device 54500000.tsec to group 18 [ 0.439875] iommu: Adding device 54100000.tsecb to group 19 [ 0.440064] iommu: Adding device 54480000.nvdec to group 20 [ 0.440252] iommu: Adding device 54380000.nvjpg to group 21 [ 0.441351] iommu: Adding device 546c0000.i2c to group 22 [ 0.441677] iommu: Adding device 57000000.gpu to group 23 [ 0.441729] platform 57000000.gpu: domain=ffffffc0f95583d8 allocates as[0]=ffffffc0f9438318 [ 0.441784] platform 57000000.gpu: domain=ffffffc0f95583d8 allocates as[1]=ffffffc0f9438380 [ 0.441824] platform 57000000.gpu: domain=ffffffc0f95583d8 allocates as[2]=ffffffc0f94383e8 [ 0.441857] platform 57000000.gpu: domain=ffffffc0f95583d8 allocates as[3]=ffffffc0f9438450 [ 0.442700] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.442709] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.442721] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.442726] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.442729] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.493241] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.493251] tegra-pmc: Clear bootloader IO dpd settings [ 0.493270] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.493336] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.493635] iommu: Adding device 70012000.se to group 24 [ 0.494482] iommu: Adding device 7000c000.i2c to group 25 [ 0.494799] iommu: Adding device 7000c400.i2c to group 26 [ 0.495100] iommu: Adding device 7000c500.i2c to group 27 [ 0.495397] iommu: Adding device 7000c700.i2c to group 28 [ 0.495701] iommu: Adding device 7000d000.i2c to group 29 [ 0.496007] iommu: Adding device 7000d100.i2c to group 30 [ 0.496353] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.496407] platform sdhci-tegra.0: domain=ffffffc0f9568558 allocates as[0]=ffffffc0f94384b8 [ 0.497386] iommu: Adding device 700d0000.xudc to group 32 [ 0.501820] vdd-ac-bat: 5000 mV [ 0.502253] vdd-5v0-sys: 5000 mV [ 0.503390] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.503436] vdd-5v0-hdmi: 5000 mV [ 0.503930] vdd-1v8-sys: 1800 mV [ 0.504404] vdd-fan: supplied by vdd-5v0-sys [ 0.504438] vdd-fan: 5000 mV [ 0.504920] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.504953] vdd-usb-vbus: 5000 mV [ 0.505532] vdd-usb-vbus2: 5000 mV [ 0.538142] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540633] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.543944] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.543966] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.544001] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.544442] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.552125] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.552484] SCSI subsystem initialized [ 0.552734] libata version 3.00 loaded. [ 0.553121] usbcore: registered new interface driver usbfs [ 0.553171] usbcore: registered new interface driver hub [ 0.553246] usbcore: registered new device driver usb [ 0.557219] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.560362] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.561158] random: fast init done [ 0.561389] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564291] vdd-ddr-1v1: 1150 mV [ 0.568289] vdd-pre-reg-1v35: 1350 mV [ 0.572235] vdd-1v8: 1800 mV [ 0.576234] avdd-sys-1v2: 1200 mV [ 0.580233] vdd-pex-1v0: 1050 mV [ 0.580906] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.581452] max77620-ldo3: at 3100 mV [ 0.584241] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.584780] max77620-ldo5: at 3100 mV [ 0.588234] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592238] avdd-1v05-pll: 1050 mV [ 0.596231] avdd-io-hdmi-dp: 1050 mV [ 0.598881] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599189] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.599484] max77620 4-003c: max77620 probe successful [ 0.602134] media: Linux media interface: v0.10 [ 0.602188] Linux video capture interface: v2.00 [ 0.603096] pps_core: LinuxPPS API ver. 1 registered [ 0.603102] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603124] PTP clock support registered [ 0.606503] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.607345] Advanced Linux Sound Architecture Driver Initialized. [ 0.607967] Bluetooth: Core ver 2.22 [ 0.608036] NET: Registered protocol family 31 [ 0.608041] Bluetooth: HCI device and connection manager initialized [ 0.608054] Bluetooth: HCI socket layer initialized [ 0.608066] Bluetooth: L2CAP socket layer initialized [ 0.608091] Bluetooth: SCO socket layer initialized [ 0.609818] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.609834] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.609879] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.609893] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.613431] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.614613] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.614679] vdd-3v3-sys: 3300 mV [ 0.614949] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.617126] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.617599] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.617643] vdd-3v3-sd: 3300 mV [ 0.618747] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.618820] avdd-io-edp-1v05: 1050 mV [ 0.619275] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.619316] vdd-usb-hub-en: 5000 mV [ 0.620679] camchar: rtcpu character device driver loaded [ 0.621450] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.622769] clocksource: Switched to clocksource arch_sys_counter [ 0.662706] VFS: Disk quotas dquot_6.6.0 [ 0.662899] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.663369] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.663765] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.663781] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.663960] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.663965] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.663976] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.663999] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.664005] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.664020] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.664028] nvmap_page_pool_init: Total RAM pages: 1011356 [ 0.664034] nvmap_page_pool_init: nvmap page pool size: 126419 pages (493 MB) [ 0.664117] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.664548] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.665249] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.674968] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.675398] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.675655] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.675862] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.676040] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.676294] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.676298] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.676734] NET: Registered protocol family 2 [ 0.677705] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.677918] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.678414] TCP: Hash tables configured (established 32768 bind 32768) [ 0.678552] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.678634] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.679091] NET: Registered protocol family 1 [ 0.679794] RPC: Registered named UNIX socket transport module. [ 0.679799] RPC: Registered udp transport module. [ 0.679803] RPC: Registered tcp transport module. [ 0.679806] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.679821] PCI: CLS 0 bytes, default 64 [ 0.680055] Trying to unpack rootfs image as initramfs... [ 0.909735] Freeing initrd memory: 5356K [ 0.919721] host1x 50000000.host1x: initialized [ 0.921506] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.924783] audit: initializing netlink subsys (disabled) [ 0.924875] audit: type=2000 audit(0.775:1): initialized [ 0.925648] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.935532] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.936991] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.937781] 9p: Installing v9fs 9p2000 file system support [ 0.941056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.941200] io scheduler noop registered [ 0.941506] io scheduler cfq registered (default) [ 0.944179] gic 702f9000.agic: GIC IRQ controller registered [ 0.947147] iommu: Adding device 702ef000.adsp to group 33 [ 0.956339] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.956520] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.957115] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x61a740e [ 0.957122] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.958687] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.958819] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.958918] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.959113] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.959195] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.959282] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.959368] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.959451] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.959540] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.959623] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.965684] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.967415] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.969268] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.970529] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.970898] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.972090] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.972315] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.972600] Adding domain tsec-pd to PM domain host1x-pd [ 0.974943] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.975922] tsec 54500000.tsec: initialized [ 0.977418] tsec 54100000.tsecb: initialized [ 0.978094] Adding domain nvdec-pd to PM domain host1x-pd [ 0.981521] nvdec 54480000.nvdec: initialized [ 0.982535] Adding domain vic03-pd to PM domain host1x-pd [ 0.982714] Adding domain msenc-pd to PM domain host1x-pd [ 0.982934] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.987220] falcon 54340000.vic: initialized [ 0.988478] falcon 544c0000.nvenc: initialized [ 0.989821] falcon 54380000.nvjpg: initialized [ 0.994313] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 0.994351] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 0.994384] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 0.994461] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 0.994586] display board info: id 0x0, fab 0x0 [ 0.994649] generic_infoframe_type: 0x87 [ 0.994658] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 0.994662] tegra_cec 70015000.tegra_cec: probed [ 0.994901] tegradc tegradc.0: DT parsed successfully [ 0.994952] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 0.998391] tegradc tegradc.0: probed [ 0.999163] Console: switching to colour frame buffer device 80x30 [ 0.999200] tegradc tegradc.0: fb registered [ 1.000387] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.000469] tegradc tegradc.1: No lt-data, using default setting [ 1.000497] tegradc tegradc.1: No hpd-gpio in DT [ 1.000530] tegradc tegradc.1: DT parsed successfully [ 1.000576] tegradc tegradc.1: Display dc.ffffff800ad00000 registered with id=1 [ 1.002669] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.002849] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.508965] Host read timeout at address 545c00c4 [ 1.510509] tegradc tegradc.1: probed [ 1.510917] tegradc tegradc.1: fb registered [ 1.510975] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.511697] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.511704] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.511989] kfuse 7000fc00.kfuse: initialized [ 1.512896] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.513671] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.514126] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.514133] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.514143] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.514158] tegradc tegradc.1: blank - powerdown [ 1.514185] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.514189] Extcon DP: HPD disabled [ 1.514195] hpd: hpd_switch 0 [ 1.514200] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.514208] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.514215] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.514659] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.514669] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.515118] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.516408] vdd-gpu: applied init 1000000uV constraint [ 1.516415] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.516775] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.520380] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.520484] No Device Node present for smmu client: serial8250 !! [ 1.520495] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.520535] iommu: Adding device serial8250 to group 35 [ 1.522945] console [ttyS0] disabled [ 1.523039] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.533389] console [ttyS0] enabled [ 1.534458] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.534741] serial-tegra 70006200.serial: RX in PIO mode [ 1.534888] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.535913] [drm] Initialized [ 1.546091] brd: module loaded [ 1.551455] loop: module loaded [ 1.551560] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.551698] tegra_profiler: auth: init [ 1.552997] THERMAL EST: found 2 subdevs [ 1.553008] THERMAL EST num_resources: 0 [ 1.553014] [THERMAL EST subdev 0] [ 1.553021] [THERMAL EST subdev 1] [ 1.553475] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.553480] THERMAL EST: thz register success. [ 1.553641] THERMAL EST: end of probe, return err: 0 [ 1.554901] sd: No Scsi addr parsed to reserve index [ 1.554944] hisi_sas: driver version v1.6 [ 1.559873] tegra-qspi 70410000.spi: Prod settings list not found [ 1.561033] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.561044] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.563968] libphy: Fixed MDIO Bus: probed [ 1.564761] tun: Universal TUN/TAP device driver, 1.6 [ 1.564766] tun: (C) 1999-2004 Max Krasnyansky [ 1.565751] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.565756] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.565816] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.565819] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.565868] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.565872] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.565924] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.565928] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.567515] PPP generic driver version 2.4.2 [ 1.567714] PPP BSD Compression module registered [ 1.567721] PPP Deflate Compression module registered [ 1.567759] PPP MPPE Compression module registered [ 1.567766] NET: Registered protocol family 24 [ 1.567837] usbcore: registered new interface driver r8152 [ 1.567882] usbcore: registered new interface driver asix [ 1.567929] usbcore: registered new interface driver ax88179_178a [ 1.567969] usbcore: registered new interface driver cdc_ether [ 1.568011] usbcore: registered new interface driver net1080 [ 1.568046] usbcore: registered new interface driver cdc_subset [ 1.568082] usbcore: registered new interface driver zaurus [ 1.568136] usbcore: registered new interface driver cdc_ncm [ 1.568322] VFIO - User Level meta-driver version: 0.3 [ 1.569629] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.569653] ehci-pci: EHCI PCI platform driver [ 1.569700] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.569711] ohci-pci: OHCI PCI platform driver [ 1.569754] ohci-platform: OHCI generic platform driver [ 1.572491] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.573107] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.574280] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9055c00 id [ 1.576621] usbcore: registered new interface driver uas [ 1.576696] usbcore: registered new interface driver usb-storage [ 1.576824] usbcore: registered new interface driver usbserial [ 1.577259] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.577311] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.577341] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.578123] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.578191] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.578402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.578409] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.578415] usb usb1: Product: xHCI Host Controller [ 1.578420] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.578424] usb usb1: SerialNumber: 70090000.xusb [ 1.579133] hub 1-0:1.0: USB hub found [ 1.579213] hub 1-0:1.0: 5 ports detected [ 1.579778] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.579790] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.579922] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.580006] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.580012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.580017] usb usb2: Product: xHCI Host Controller [ 1.580022] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.580027] usb usb2: SerialNumber: 70090000.xusb [ 1.580483] hub 2-0:1.0: USB hub found [ 1.580517] hub 2-0:1.0: 4 ports detected [ 1.583781] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.585047] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.585064] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.585526] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.585809] mousedev: PS/2 mouse device common for all mice [ 1.585927] usbcore: registered new interface driver xpad [ 1.586902] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.682865] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.687626] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.690167] rtc rtc1: alarm rtc device [ 1.690188] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.690246] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.690920] i2c /dev entries driver [ 1.692931] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.693355] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.693363] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.694089] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.717426] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.717523] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.725095] imx219 7-0010: board setup failed [ 1.729582] imx219: probe of 7-0010 failed with error -121 [ 1.730081] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.753360] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.753451] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.760986] imx219 8-0010: board setup failed [ 1.765419] imx219: probe of 8-0010 failed with error -121 [ 1.766624] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.769166] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.769173] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.769612] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.769630] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.769641] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.769777] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.769788] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.769796] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.769940] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.769950] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.769955] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.770127] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.770977] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.771036] tegra_aotag tegra-aotag: Invalid temp readout [ 1.771060] tegra_aotag tegra-aotag: Invalid temp readout [ 1.771078] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.771088] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.771994] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.772013] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.772193] tegra_aotag tegra-aotag: Invalid temp readout [ 1.772223] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.772624] parse_throttle_dt_data: Num cap clks = 6 [ 1.772631] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.772646] parse_throttle_dt_data: clk=gpu type=4 [ 1.772673] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.772692] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.772713] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.772717] parse_throttle_dt_data: clk=emc type=3 [ 1.773145] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.773250] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.773401] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.774136] FAN dev name: pwm-fan [ 1.774215] FAN:gpio request success. [ 1.774283] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.774587] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.774807] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.774818] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.774928] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.774934] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.774940] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.774945] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.774949] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.774954] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.774959] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.774964] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.774968] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.774973] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.775758] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 1.776111] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 1.777059] device-mapper: uevent: version 1.0.3 [ 1.777532] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.783325] tegra210-cpufreq cpufreq: probe()...completed [ 1.784026] sdhci: Secure Digital Host Controller Interface driver [ 1.784028] sdhci: Copyright(c) Pierre Ossman [ 1.784030] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.784512] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.784853] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.784990] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.789205] tegra-se 70012000.se: tegra_se_probe: complete [ 1.789711] hidraw: raw HID events driver (C) Jiri Kosina [ 1.790840] usbcore: registered new interface driver usbhid [ 1.790843] usbhid: USB HID core driver [ 1.793028] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.793217] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.795117] nvpmodel: initialized successfully [ 1.796130] usbcore: registered new interface driver snd-usb-audio [ 1.796187] No Device Node present for smmu client: snd-soc-dummy !! [ 1.796192] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.796219] iommu: Adding device snd-soc-dummy to group 36 [ 1.807333] OPE platform probe [ 1.807418] OPE platform probe successful [ 1.807680] OPE platform probe [ 1.807760] OPE platform probe successful [ 1.819602] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.830599] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.830786] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.830897] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.832117] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.832260] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.834519] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.834646] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.834822] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.834953] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.835078] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.835239] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.850045] u32 classifier [ 1.850048] Actions configured [ 1.850121] Initializing XFRM netlink socket [ 1.850847] NET: Registered protocol family 10 [ 1.851511] NET: Registered protocol family 17 [ 1.851523] NET: Registered protocol family 15 [ 1.851596] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.851642] Bluetooth: RFCOMM socket layer initialized [ 1.851651] Bluetooth: RFCOMM ver 1.11 [ 1.851657] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.851662] Bluetooth: HIDP socket layer initialized [ 1.851681] 9pnet: Installing 9P2000 support [ 1.851714] Key type dns_resolver registered [ 1.852081] Registered cp15_barrier emulation handler [ 1.852088] Registered setend emulation handler [ 1.853134] registered taskstats version 1 [ 1.853657] Adding domain ve2-pd to PM domain host1x-pd [ 1.853909] Adding domain ve-pd to PM domain host1x-pd [ 1.856001] isp 54600000.isp: initialized [ 1.856942] isp 54680000.isp: initialized [ 1.869475] last reset is due to power on reset [ 1.869480] KERNEL: PMC reset status reg: 0x0 [ 1.869556] BL: PMC reset status reg: 0x0 [ 1.869559] BL: PMIC poweroff Event Recorder: 0x40 [ 1.871079] clk_cbus_recalc_rate: no gbus parent [ 1.871084] clk_cbus_round_rate: no gbus parent [ 1.871087] clk_cbus_round_rate: no gbus parent [ 1.871094] clk_cbus_recalc_rate: no gbus parent [ 1.871192] clk_cbus_recalc_rate: no gbus parent [ 1.871195] clk_cbus_round_rate: no gbus parent [ 1.871197] clk_cbus_round_rate: no gbus parent [ 1.871201] clk_cbus_recalc_rate: no gbus parent [ 1.871876] tegra_dvfs: GPU-cap: registered [ 1.871931] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.871934] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.871936] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.873376] tegra_dvfs: vdd-gpu-vts: registered [ 1.874035] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.874665] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.875242] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.908118] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:13 UTC (946688413) [ 1.909149] vi 54080000.vi: vi_probe: ++ [ 1.910784] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.913141] vi 54080000.vi: initialized [ 1.915316] vi 54080000.vi: subdev nvcsi--2 bound [ 1.915411] vi 54080000.vi: subdev nvcsi--1 bound [ 1.916898] Disable partitions left on by BL [ 1.916901] disb [ 1.916947] bwmgr: missing cdev-type property [ 1.917045] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.917051] DRAM derating cdev registered. [ 1.918058] vdd-fan: disabling [ 1.918061] vdd-usb-vbus: disabling [ 1.918063] vdd-usb-vbus2: disabling [ 1.918074] vddio-sdmmc3-ap: disabling [ 1.918157] avdd-io-edp-1v05: disabling [ 1.918159] vdd-usb-hub-en: disabling [ 1.918242] ALSA device list: [ 1.918244] #0: tegra-hda at 0x70038000 irq 83 [ 1.918246] #1: tegra-snd-t210ref-mobile-rt565x [ 1.921289] Freeing unused kernel memory: 8576K [ 1.929249] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.939695] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.939702] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.939706] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.939709] usb 1-2: Manufacturer: Generic [ 1.940613] hub 1-2:1.0: USB hub found [ 1.941195] hub 1-2:1.0: 4 ports detected [ 1.946387] Root device found: mmcblk0p1 [ 2.003348] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.003353] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.029588] mmc0: hw tuning done ... [ 2.029635] mmc0: new ultra high speed SDR104 SDHC card at address 5048 [ 2.030087] mmcblk0: mmc0:5048 SD32G 28.9 GiB [ 2.033335] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 2.066834] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 2.086834] usb 1-2: usb_suspend_both: status 0 [ 2.086889] usb usb1: usb_suspend_both: status 0 [ 2.151146] Found dev node: /dev/mmcblk0p1 [ 2.194666] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.195442] Rootfs mounted over mmcblk0p1 [ 2.219526] Switching from initrd to actual rootfs [ 2.332792] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.426612] systemd[1]: System time before build time, advancing clock. [ 2.450378] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.462839] cgroup: cgroup2: unknown option "nsdelegate" [ 2.486623] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.487431] systemd[1]: Detected architecture arm64. [ 2.510452] systemd[1]: Set hostname to . [ 2.621603] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.621613] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.736252] random: systemd: uninitialized urandom read (16 bytes read) [ 2.736284] systemd[1]: Reached target User and Group Name Lookups. [ 2.736451] random: systemd: uninitialized urandom read (16 bytes read) [ 2.736471] systemd[1]: Reached target Swap. [ 2.736515] random: systemd: uninitialized urandom read (16 bytes read) [ 2.738082] systemd[1]: Created slice User and Session Slice. [ 2.740075] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.740249] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.744815] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.746960] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.806324] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.852358] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.852365] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.852369] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.852373] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.852377] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.852398] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.852460] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.852728] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.852841] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.852866] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.852896] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.852916] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.853349] pci 0000:01:00.0: supports D1 D2 [ 2.853354] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.862926] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.862958] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.862963] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.862970] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.862988] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.863005] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.863013] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.863017] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.863023] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.863308] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.863312] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.863317] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.863418] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.863585] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.863603] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.879304] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.879320] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.907115] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.986445] systemd-journald[1981]: Received request to flush runtime journal from PID 1 [ 4.053526] random: crng init done [ 4.056933] random: 7 urandom warning(s) missed due to ratelimiting [ 4.391865] using random self ethernet address [ 4.396468] using random host ethernet address [ 5.743206] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 5.743212] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 6.071176] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 6.100305] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 6.100312] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.100316] usb 2-1: Product: 4-Port USB 3.1 Hub [ 6.100320] usb 2-1: Manufacturer: Generic [ 6.103969] hub 2-1:1.0: USB hub found [ 6.104798] hub 2-1:1.0: 4 ports detected [ 6.262828] usb 2-1: usb_suspend_both: status 0 [ 6.262968] usb usb2: usb_suspend_both: status 0 [ 6.263273] Mass Storage Function, version: 2009/09/11 [ 6.263279] LUN: removable file: (no medium) [ 6.268299] using random self ethernet address [ 6.273146] using random host ethernet address [ 6.311287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.312288] eth0: 0xffffff800ab6b000, 00:00:00:00:00:01, IRQ 407 [ 6.366216] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.374351] rndis0: HOST MAC 4e:47:40:bd:1c:38 [ 6.374578] rndis0: MAC 4e:47:40:bd:1c:39 [ 6.387106] usb0: HOST MAC 4e:47:40:bd:1c:3a [ 6.387385] usb0: MAC 4e:47:40:bd:1c:3b [ 6.387414] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 6.388173] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 6.388191] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.388221] tegra-xudc-new 700d0000.xudc: entering ELPG [ 6.388462] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 6.388476] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 6.389608] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 6.389642] tegra-xudc-new 700d0000.xudc: entering ELPG [ 6.389886] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 6.394359] l4tbr0: port 1(rndis0) entered blocking state [ 6.394364] l4tbr0: port 1(rndis0) entered disabled state [ 6.394923] device rndis0 entered promiscuous mode [ 6.400793] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.405406] l4tbr0: port 2(usb0) entered blocking state [ 6.405411] l4tbr0: port 2(usb0) entered disabled state [ 6.405969] device usb0 entered promiscuous mode [ 6.415639] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.038051] zram: Added device: zram0 [ 7.039440] zram: Added device: zram1 [ 7.040690] zram: Added device: zram2 [ 7.043677] zram: Added device: zram3 [ 7.061447] zram0: detected capacity change from 0 to 519598080 [ 7.142030] Adding 507416k swap on /dev/zram0. Priority:5 extents:1 across:507416k SS [ 7.147564] zram1: detected capacity change from 0 to 519598080 [ 7.159097] Adding 507416k swap on /dev/zram1. Priority:5 extents:1 across:507416k SS [ 7.162455] zram2: detected capacity change from 0 to 519598080 [ 7.172993] Adding 507416k swap on /dev/zram2. Priority:5 extents:1 across:507416k SS [ 7.176558] zram3: detected capacity change from 0 to 519598080 [ 7.187859] Adding 507416k swap on /dev/zram3. Priority:5 extents:1 across:507416k SS [ 7.954858] tegra-xusb 70090000.xusb: entering ELPG [ 7.955887] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3 [ 7.956081] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 7.957629] tegra-xusb 70090000.xusb: entering ELPG done [ 12.764425] tegradc tegradc.0: blank - powerdown [ 12.764435] tegradc tegradc.1: blank - powerdown [ 13.573314] fuse init (API version 7.26) [ 14.464664] tegra-xusb 70090000.xusb: exiting ELPG [ 14.465544] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 14.468966] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 14.469235] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0 [ 14.469259] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1 [ 14.469280] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2 [ 14.469759] tegra-xusb 70090000.xusb: exiting ELPG done [ 14.894809] usb 1-2.2: new low-speed USB device number 3 using tegra-xusb [ 14.920925] usb 1-2.2: New USB device found, idVendor=1a2c, idProduct=0e24 [ 14.920933] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.920937] usb 1-2.2: Product: USB Keyboard [ 14.920941] usb 1-2.2: Manufacturer: SEM [ 14.926508] input: SEM USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.0/0003:1A2C:0E24.0001/input/input2 [ 14.983402] hid-generic 0003:1A2C:0E24.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-70090000.xusb-2.2/input0 [ 14.987136] input: SEM USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:0E24.0002/input/input3 [ 15.047465] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-70090000.xusb-2.2/input1 [ 19.298845] usb 1-2.1: new full-speed USB device number 4 using tegra-xusb [ 19.366697] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c24a [ 19.366705] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 19.366709] usb 1-2.1: Product: Gaming Mouse G600 [ 19.366712] usb 1-2.1: Manufacturer: Logitech [ 19.366715] usb 1-2.1: SerialNumber: C3ACD2F5A8F90017 [ 19.376521] input: Logitech Gaming Mouse G600 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C24A.0003/input/input4 [ 19.376996] hid-generic 0003:046D:C24A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-70090000.xusb-2.1/input0 [ 19.403264] input: Logitech Gaming Mouse G600 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C24A.0004/input/input5 [ 19.464042] hid-generic 0003:046D:C24A.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-70090000.xusb-2.1/input1 [ 54.691035] edid invalid [ 54.700523] edid invalid [ 55.135166] edid invalid [ 55.257969] tegradc tegradc.0: blank - powerdown [ 55.282751] tegradc tegradc.0: unblank [ 55.313628] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 55.313725] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 55.341838] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 55.341842] Extcon HDMI: HPD enabled [ 55.341875] tegradc tegradc.0: hdmi: plugged [ 55.353773] tegradc tegradc.0: blank - powerdown [ 55.416940] extcon-disp-state extcon:disp-state: cable 47 state 0 already set. [ 55.416948] Extcon AUX1(HDMI) disable [ 55.437427] tegradc tegradc.1: blank - powerdown [ 55.481151] tegradc tegradc.0: blank - powerdown [ 55.481184] tegradc tegradc.0: unblank [ 55.493010] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 55.493096] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 55.520330] tegradc tegradc.0: unblank [ 55.520339] tegradc tegradc.1: blank - powerdown [ 67.427461] tegradc tegradc.0: blank - powerdown [ 67.478080] extcon-disp-state extcon:disp-state: cable 47 state 0 already set. [ 67.478086] Extcon AUX1(HDMI) disable [ 67.501090] tegradc tegradc.1: blank - powerdown [ 67.658711] tegradc tegradc.0: blank - powerdown [ 67.658733] tegradc tegradc.0: unblank [ 67.663531] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 67.663615] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 67.689945] tegradc tegradc.0: unblank [ 67.689954] tegradc tegradc.1: blank - powerdown [ 70.694008] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 70.694021] Bluetooth: BNEP socket layer initialized [ 71.815844] tegradc tegradc.0: unblank [ 71.815857] tegradc tegradc.1: blank - powerdown [ 409.257953] tegradc tegradc.0: blank - powerdown [ 409.314036] extcon-disp-state extcon:disp-state: cable 47 state 0 already set. [ 409.314038] Extcon AUX1(HDMI) disable [ 418.021092] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 418.021408] usb 1-2: USB disconnect, device number 2 [ 418.021468] usb 1-2.1: USB disconnect, device number 4 [ 418.130318] usb 1-2.2: USB disconnect, device number 3 [ 418.410917] usb usb1: usb_suspend_both: status 0 [ 418.410932] tegra-xusb 70090000.xusb: entering ELPG [ 418.411961] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0 [ 418.412154] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 418.413701] tegra-xusb 70090000.xusb: entering ELPG done [ 418.474926] tegra-xusb 70090000.xusb: exiting ELPG [ 418.478992] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 418.479344] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0 [ 418.479412] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1 [ 418.479461] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2 [ 418.490372] tegra-xusb 70090000.xusb: exiting ELPG done [ 418.491353] usb usb1: usb_suspend_both: status 0 [ 418.599173] usb 2-1: USB disconnect, device number 2 [ 418.603871] usb usb2: usb_suspend_both: status 0 [ 420.979589] tegra-xusb 70090000.xusb: entering ELPG [ 420.980963] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0 [ 420.981553] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 420.984932] tegra-xusb 70090000.xusb: entering ELPG done [ 446.948030] tegra-xusb 70090000.xusb: exiting ELPG [ 446.949614] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 446.954459] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 446.955262] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0 [ 446.955455] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1 [ 446.955578] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2 [ 446.956094] tegra-xusb 70090000.xusb: exiting ELPG done [ 447.182952] usb 1-2: new high-speed USB device number 5 using tegra-xusb [ 447.216918] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 447.216978] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 447.217019] usb 1-2: Product: 4-Port USB 2.1 Hub [ 447.217059] usb 1-2: Manufacturer: Generic [ 447.223522] hub 1-2:1.0: USB hub found [ 447.224823] hub 1-2:1.0: 4 ports detected [ 447.327891] usb 2-1: new SuperSpeed USB device number 3 using tegra-xusb [ 447.362314] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 447.362341] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 447.362360] usb 2-1: Product: 4-Port USB 3.1 Hub [ 447.362378] usb 2-1: Manufacturer: Generic [ 447.369102] hub 2-1:1.0: USB hub found [ 447.369912] hub 2-1:1.0: 4 ports detected [ 447.510840] usb 1-2.1: new full-speed USB device number 6 using tegra-xusb [ 447.526893] usb 2-1: usb_suspend_both: status 0 [ 447.527254] usb usb2: usb_suspend_both: status 0 [ 447.581680] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c24a [ 447.581708] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 447.581725] usb 1-2.1: Product: Gaming Mouse G600 [ 447.581739] usb 1-2.1: Manufacturer: Logitech [ 447.581752] usb 1-2.1: SerialNumber: C3ACD2F5A8F90017 [ 447.590242] input: Logitech Gaming Mouse G600 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C24A.0005/input/input6 [ 447.590498] hid-generic 0003:046D:C24A.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-70090000.xusb-2.1/input0 [ 447.616531] input: Logitech Gaming Mouse G600 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C24A.0006/input/input7 [ 447.677292] hid-generic 0003:046D:C24A.0006: input,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-70090000.xusb-2.1/input1 [ 447.946844] usb 1-2.2: new low-speed USB device number 7 using tegra-xusb [ 447.972774] usb 1-2.2: New USB device found, idVendor=1a2c, idProduct=0e24 [ 447.972782] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 447.972786] usb 1-2.2: Product: USB Keyboard [ 447.972790] usb 1-2.2: Manufacturer: SEM [ 447.976822] input: SEM USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.0/0003:1A2C:0E24.0007/input/input8 [ 448.035279] hid-generic 0003:1A2C:0E24.0007: input,hidraw2: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-70090000.xusb-2.2/input0 [ 448.039005] input: SEM USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:0E24.0008/input/input9 [ 448.099567] hid-generic 0003:1A2C:0E24.0008: input,hidraw3: USB HID v1.10 Device [SEM USB Keyboard] on usb-70090000.xusb-2.2/input1 [ 457.950141] tegradc tegradc.0: unblank [ 457.972366] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 457.972728] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 458.051813] tegradc tegradc.0: unblank [ 458.051824] tegradc tegradc.1: blank - powerdown [ 500.947627] r8168: eth0: link up [ 500.948147] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 534.345311] blk_update_request: I/O error, dev loop1, sector 0 [ 534.351251] blk_update_request: I/O error, dev loop1, sector 0 [ 534.357139] Buffer I/O error on dev loop1, logical block 0, async page read [ 4030.612195] r8168: eth0: link down [ 4041.964639] usb 1-2.1: USB disconnect, device number 6 [ 4047.597822] usb 1-2.2: USB disconnect, device number 7 [ 4047.919234] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 4047.939217] usb 1-2: usb_suspend_both: status 0 [ 4047.939388] usb usb1: usb_suspend_both: status 0 [ 4047.939398] tegra-xusb 70090000.xusb: entering ELPG [ 4047.940432] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3 [ 4047.940619] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 4047.942163] tegra-xusb 70090000.xusb: entering ELPG done [ 4067.036563] tegradc tegradc.0: read_edid_into_buffer: extension_blocks = 0, max_ext_blocks = 3 [ 4067.036621] tegradc tegradc.0: hdmi_recheck_edid: read_edid_into_buffer() returned 128 [ 4067.036670] tegradc tegradc.0: old edid len = 128 [ 4067.036758] tegradc tegradc.0: hdmi: No EDID change after HPD bounce, taking no action [ 4067.217099] extcon-disp-state extcon:disp-state: cable 47 state 0 already set. [ 4067.217136] Extcon AUX1(HDMI) disable [ 4067.237520] tegradc tegradc.0: blank - powerdown [ 4067.237594] extcon-disp-state extcon:disp-state: cable 51 state 0 [ 4067.237596] Extcon HDMI: HPD disabled [ 4067.237621] tegradc tegradc.0: hdmi: unplugged [ 4067.290722] tegradc tegradc.0: blank - powerdown [ 4067.290735] tegradc tegradc.0: unblank [ 4067.290766] tegradc tegradc.0: unblank [ 4067.290793] tegradc tegradc.1: blank - powerdown [ 4172.033848] tegradc tegradc.0: blank - powerdown [14132.510163] tegra-xusb 70090000.xusb: exiting ELPG [14132.511736] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [14132.516728] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [14132.517226] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0 [14132.517417] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1 [14132.517602] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2 [14132.518658] tegra-xusb 70090000.xusb: exiting ELPG done [14132.521197] usb usb2: usb_suspend_both: status 0 [14132.864625] usb 1-2.2: new low-speed USB device number 8 using tegra-xusb [14132.891717] usb 1-2.2: New USB device found, idVendor=1a2c, idProduct=0e24 [14132.891746] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [14132.891765] usb 1-2.2: Product: USB Keyboard [14132.891782] usb 1-2.2: Manufacturer: SEM [14132.902034] input: SEM USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.0/0003:1A2C:0E24.0009/input/input10 [14132.962560] hid-generic 0003:1A2C:0E24.0009: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-70090000.xusb-2.2/input0 [14132.966309] input: SEM USB Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.1/0003:1A2C:0E24.000A/input/input11 [14133.026581] hid-generic 0003:1A2C:0E24.000A: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-70090000.xusb-2.2/input1 [14136.328237] usb 1-2.1: new full-speed USB device number 9 using tegra-xusb [14136.401650] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c24a [14136.401725] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [14136.401772] usb 1-2.1: Product: Gaming Mouse G600 [14136.401816] usb 1-2.1: Manufacturer: Logitech [14136.401856] usb 1-2.1: SerialNumber: C3ACD2F5A8F90017 [14136.421232] input: Logitech Gaming Mouse G600 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C24A.000B/input/input12 [14136.421716] hid-generic 0003:046D:C24A.000B: input,hidraw2: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-70090000.xusb-2.1/input0 [14136.450471] input: Logitech Gaming Mouse G600 as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C24A.000C/input/input13 [14136.510638] hid-generic 0003:046D:C24A.000C: input,hidraw3: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-70090000.xusb-2.1/input1 [14147.664879] r8168: eth0: link up [14164.466123] tegradc tegradc.0: blank - powerdown [14164.466269] tegradc tegradc.0: unblank [14164.495826] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [14164.495914] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [14164.519781] extcon-disp-state extcon:disp-state: cable 51 state 1 [14164.519786] Extcon HDMI: HPD enabled [14164.519828] tegradc tegradc.0: hdmi: plugged [14164.534514] tegradc tegradc.0: blank - powerdown [14164.597506] extcon-disp-state extcon:disp-state: cable 47 state 0 already set. [14164.597514] Extcon AUX1(HDMI) disable [14164.617800] tegradc tegradc.0: unblank [14164.628322] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [14164.628406] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [14164.648999] tegradc tegradc.0: unblank [14164.649009] tegradc tegradc.1: blank - powerdown [14164.710567] tegradc tegradc.0: unblank [14164.710580] tegradc tegradc.1: blank - powerdown