############################################################################### # L4T BSP Information: # R35 , REVISION: 2.1 # User release: 0.0 ############################################################################### # Target Board Information: # Name: jetson-agx-orin-devkit, Board Family: t186ref, SoC: Tegra 234, # OpMode: production, Boot Authentication: NS, # Disk encryption: disabled , ############################################################################### copying emc_fuse_dev_params(/home/matthewjk/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-br-bct-diag-boot.dts)... done. copying device_config(/home/matthewjk/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-device-p3701-0000.dts)... done. copying misc_config(/home/matthewjk/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-misc-p3701-0000.dts)... done. ./tegraflash.py --chip 0x23 --applet "/home/matthewjk/nvidia/nvidia_sdk/JetPack_5.1_Linux_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/mb1_t234_prod.bin" --skipuid --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --device_config tegra234-mb1-bct-device-p3701-0000.dts --misc_config tegra234-mb1-bct-misc-p3701-0000.dts --bins "mb2_applet applet_t234.bin" --cmd "dump eeprom cvm cvm.bin; dump custinfo custinfo_out.bin; reboot recovery" Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 0.0178 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet [ 0.0195 ] File rcm_state open failed [ 0.0199 ] ERROR: failed to read rcm_state [ 0.0199 ] [ 0.0221 ] tegrasign_v3.py --key None --getmode mode.txt [ 0.0224 ] Assuming zero filled SBK key [ 0.0205 ] Pre-processing config: tegra234-mb1-bct-device-p3701-0000.dts [ 0.0342 ] Pre-processing config: tegra234-mb1-bct-misc-p3701-0000.dts [ 0.0524 ] Parsing partition layout [ 0.0548 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 0.0585 ] Kernel DTB used: None [ 0.0585 ] WARNING: dce base dtb is not provided [ 0.0586 ] Parsing partition layout [ 0.0602 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 0.0621 ] Creating list of images to be signed [ 0.0637 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --list images_list.xml zerosbk [ 0.0652 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 0.0684 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 0.0695 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 0.0799 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 0.0807 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 0.0867 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 0.0873 ] adding BCH for mb2_t234_aligned.bin [ 0.0908 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 0.1075 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 0.1083 ] adding BCH for mb2_t234_aligned.bin [ 0.1288 ] Filling MB1 storage info [ 0.1289 ] Parsing dev params for multi chains [ 0.1404 ] Generating br-bct [ 0.1430 ] Updating dev and MSS params in BR BCT [ 0.1432 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 0.1448 ] Updating bl info [ 0.1459 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin [ 0.1469 ] WARNING: boot chain is not completed. set to 0 [ 0.1479 ] Generating signatures [ 0.1501 ] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1504 ] Assuming zero filled SBK key [ 0.1653 ] Warning: pub_key.key is not found [ 0.1636 ] Parsing dev params for multi chains [ 0.1636 ] Generating br-bct [ 0.1647 ] Updating dev and MSS params in BR BCT [ 0.1648 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 0.1660 ] Updating bl info [ 0.1672 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 0.1681 ] WARNING: boot chain is not completed. set to 0 [ 0.1694 ] Get Signed section of bct [ 0.1707 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --listbct bct_list.xml [ 0.1733 ] Signing BCT [ 0.1755 ] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.1759 ] Assuming zero filled SBK key [ 0.1795 ] Sha saved in br_bct_BR.sha [ 0.1799 ] Warning: pub_key.key is not found [ 0.1779 ] Updating BCT with signature [ 0.1789 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml [ 0.1802 ] Offset :4608 Len :3584 [ 0.1810 ] Generating SHA2 Hash [ 0.1831 ] tegrasign_v3.py --key None --list bct_list.xml --sha sha512 [ 0.1836 ] Assuming zero filled SBK key [ 0.1836 ] Assuming zero filled SBK key [ 0.1880 ] Sha saved in br_bct_BR.sha [ 0.1864 ] Updating BCT with SHA2 Hash [ 0.1874 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesha bct_list_signed.xml [ 0.1884 ] Offset :4608 Len :3584 [ 0.1888 ] Offset :68 Len :8124 [ 0.1891 ] Generating coldboot mb1-bct [ 0.1901 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 0.1910 ] MB1-BCT version: 0.9 [ 0.1913 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1920 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1927 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.1933 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1937 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1937 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.1937 ] [ 0.1937 ] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 0.1937 ] Added Platform Config 9 data with size :- 100 [ 0.1938 ] [ 0.1938 ] Updating mb1-bct with firmware information [ 0.1948 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t234_min_prod.xml.bin [ 0.1972 ] tegrahost_v2 --chip 0x23 0 --align mb1_cold_boot_bct_MB1_aligned.bct [ 0.1990 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk [ 0.1999 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct [ 0.2033 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.2036 ] Assuming zero filled SBK key [ 0.2073 ] Warning: pub_key.key is not found [ 0.2067 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 0.2084 ] Generating recovery mb1-bct [ 0.2094 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 0.2104 ] MB1-BCT version: 0.9 [ 0.2108 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2115 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2122 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_UNUSED5/ is not supported [ 0.2129 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2133 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2133 ] ERROR: carveout /misc/carveout/aux_info@CARVEOUT_MCE_COVERAGE/ is not supported [ 0.2133 ] [ 0.2134 ] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 0.2134 ] Added Platform Config 9 data with size :- 100 [ 0.2134 ] [ 0.2134 ] Updating mb1-bct with firmware information [ 0.2152 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo readinfo_t234_min_prod.xml.bin [ 0.2184 ] tegrahost_v2 --chip 0x23 0 --align mb1_bct_MB1_aligned.bct [ 0.2205 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk [ 0.2214 ] adding BCH for mb1_bct_MB1_aligned.bct [ 0.2247 ] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 0.2249 ] Assuming zero filled SBK key [ 0.2269 ] Warning: pub_key.key is not found [ 0.2263 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 0.2281 ] Error: Skip generating mem_bct because sdram_config is not defined [ 0.2281 ] Error: Skip generating mem_bct because sdram_config is not defined [ 0.2281 ] Copying signatures [ 0.2291 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 0.2386 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [ 0.2389 ] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [ 0.2389 ] Boot Rom communication [ 0.2401 ] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [ 0.2411 ] BR_CID: 0x80012344705DD41D200000000BFE8140 [ 0.2681 ] Sending bct_br [ 0.3157 ] ERROR: might be timeout in USB write. Error: Return value 3 Command tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt Reading board information failed.