[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-rt93+ (oe-user@oe-host) (gcc version 8.3.0 (GCC) ) #1 SMP PREEMPT RT Thu Jan 28 12:25:47 UTC 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefd3000 s65216 r8192 d28992 u102400 [ 0.000000] pcpu-alloc: s65216 r8192 d28992 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 console=ttyGS0,115200 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29712(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3566684K/4159488K available (15038K kernel code, 2950K rwdata, 9868K rodata, 8576K init, 627K bss, 117668K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f30000 ( 15040 KB) [ 0.000000] .rodata : 0xffffff8008f30000 - 0xffffff80098e0000 ( 9920 KB) [ 0.000000] .init : 0xffffff80098e0000 - 0xffffff800a140000 ( 8576 KB) [ 0.000000] .data : 0xffffff800a140000 - 0xffffff800a421808 ( 2951 KB) [ 0.000000] .bss : 0xffffff800a421808 - 0xffffff800a4be618 ( 628 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001446] Console: colour dummy device 80x25 [ 0.001474] kmemleak: Kernel memory leak detector disabled [ 0.001496] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200) [ 0.001500] pid_max: default: 32768 minimum: 301 [ 0.001958] Security Framework initialized [ 0.002184] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002191] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003384] ftrace: allocating 47085 entries in 184 pages [ 0.174792] sched-energy: CPU device node has no sched-energy-costs [ 0.174827] ASID allocator initialised with 65536 entries [ 0.193574] tegra-id: chipid=22117. [ 0.193589] tegra-id: opt_subrevision=0. [ 0.193606] Tegra Speedo/IDDQ fuse revision 4 [ 0.193611] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.193614] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.193620] Tegra: CPU Speedo Value 2050, SoC Speedo Value 1951, GPU Speedo Value 2049 [ 0.193624] Tegra: CPU IDDQ Value 1772, SoC IDDQ Value 1916, GPU IDDQ Value 2315 [ 0.193646] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.193662] DTS File Name: /media/novadembe_data/novadem-tegra/build_devkit/tmp/work-shared/jetcam-nano/kernel-source/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-a02.dts [ 0.193669] DTB Build time: Jan 28 2021 12:25:47 [ 0.211059] CPU1: Booted secondary processor [411fd071] [ 0.222996] CPU2: Booted secondary processor [411fd071] [ 0.233974] CPU3: Booted secondary processor [411fd071] [ 0.234112] Brought up 4 CPUs [ 0.234120] SMP: Total of 4 processors activated. [ 0.234129] CPU features: detected feature: 32-bit EL0 Support [ 0.234430] CPU: All CPU(s) started at EL2 [ 0.234447] alternatives: patching kernel code [ 0.242752] devtmpfs: initialized [ 0.277483] Initilizing CustomIPI irq domain [ 0.277828] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.277850] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.289051] pinctrl core: initialized pinctrl subsystem [ 0.289637] OS set in device tree is not L4T. [ 0.289964] regulator-dummy: no parameters [ 0.290197] Initializing plugin-manager [ 0.290325] Plugin module not found [ 0.293777] NET: Registered protocol family 16 [ 0.295043] pstore: using zlib compression [ 0.295075] console [pstore-1] enabled [ 0.295080] pstore: Registered ramoops as persistent store backend [ 0.295086] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.295934] cpuidle: using governor menu [ 0.299322] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.300557] vdso: 2 pages (1 code @ ffffff8008f37000, 1 data @ ffffff800a144000) [ 0.300580] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302579] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.304469] Serial: AMBA PL011 UART driver [ 0.304943] tegra_powergate_init: DONE [ 0.304958] DTS File Name: /media/novadembe_data/novadem-tegra/build_devkit/tmp/work-shared/jetcam-nano/kernel-source/arch/arm64/boot/dts/../../../../nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-a02.dts [ 0.304964] DTB Build time: Jan 28 2021 12:25:47 [ 0.306276] Tegra reboot handler registered. [ 0.310411] iommu: Adding device tegra-carveouts to group 0 [ 0.310538] platform tegra-carveouts: domain=ffffffc0f94eec18 allocates as[0]=ffffffc0f9010100 [ 0.310875] iommu: Adding device smmu_test to group 1 [ 0.310931] platform smmu_test: domain=ffffffc0f94eed98 allocates as[0]=ffffffc0f90101e8 [ 0.311761] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.311816] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.311875] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.311883] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.311904] mc-err: mcerr ops are set to t21x [ 0.321766] iommu: Adding device 70090000.xusb to group 2 [ 0.322061] iommu: Adding device 70006000.serial to group 3 [ 0.322148] platform 70006000.serial: domain=ffffffc0f900e6d8 allocates as[0]=ffffffc0f90102d0 [ 0.322575] iommu: Adding device 70006040.serial to group 4 [ 0.322829] iommu: Adding device 70006200.serial to group 5 [ 0.323119] iommu: Adding device 70006300.serial to group 6 [ 0.323308] iommu: Adding device sound to group 7 [ 0.323364] platform sound: domain=ffffffc0f900ea98 allocates as[0]=ffffffc0f90103b8 [ 0.323877] iommu: Adding device 7000d400.spi to group 8 [ 0.324163] iommu: Adding device 7000d600.spi to group 9 [ 0.324512] iommu: Adding device 50000000.host1x to group 10 [ 0.324776] iommu: Adding device 54080000.vi to group 11 [ 0.325179] iommu: Adding device 54600000.isp to group 12 [ 0.325435] iommu: Adding device 54680000.isp to group 13 [ 0.325697] iommu: Adding device tegradc.0 to group 14 [ 0.325755] platform tegradc.0: domain=ffffffc0f90ba198 allocates as[0]=ffffffc0f90104a0 [ 0.326313] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.326608] iommu: Adding device tegradc.1 to group 15 [ 0.326690] platform tegradc.1: domain=ffffffc0f90ba318 allocates as[0]=ffffffc0f9010588 [ 0.327229] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.327484] iommu: Adding device 54340000.vic to group 16 [ 0.327678] iommu: Adding device 544c0000.nvenc to group 17 [ 0.327857] iommu: Adding device 54500000.tsec to group 18 [ 0.328081] iommu: Adding device 54100000.tsecb to group 19 [ 0.328274] iommu: Adding device 54480000.nvdec to group 20 [ 0.328458] iommu: Adding device 54380000.nvjpg to group 21 [ 0.329176] iommu: Adding device 546c0000.i2c to group 22 [ 0.329503] iommu: Adding device 57000000.gpu to group 23 [ 0.329555] platform 57000000.gpu: domain=ffffffc0f90ba9d8 allocates as[0]=ffffffc0f9010670 [ 0.329595] platform 57000000.gpu: domain=ffffffc0f90ba9d8 allocates as[1]=ffffffc0f9010758 [ 0.329647] platform 57000000.gpu: domain=ffffffc0f90ba9d8 allocates as[2]=ffffffc0f9010840 [ 0.329688] platform 57000000.gpu: domain=ffffffc0f90ba9d8 allocates as[3]=ffffffc0f9010928 [ 0.330563] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.330573] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.330585] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.330589] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.330593] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.344141] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.344148] tegra-pmc: Clear bootloader IO dpd settings [ 0.344167] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.344230] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.344508] iommu: Adding device 70012000.se to group 24 [ 0.345261] iommu: Adding device 7000c000.i2c to group 25 [ 0.345536] iommu: Adding device 7000c400.i2c to group 26 [ 0.345775] iommu: Adding device 7000c500.i2c to group 27 [ 0.346072] iommu: Adding device 7000d000.i2c to group 28 [ 0.346318] iommu: Adding device 7000d100.i2c to group 29 [ 0.346566] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.346623] platform sdhci-tegra.3: domain=ffffffc0f916a0d8 allocates as[0]=ffffffc0f9010a10 [ 0.347084] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.347165] platform sdhci-tegra.2: domain=ffffffc0f916a258 allocates as[0]=ffffffc0f9010af8 [ 0.347592] iommu: Adding device sdhci-tegra.0 to group 32 [ 0.347648] platform sdhci-tegra.0: domain=ffffffc0f916a3d8 allocates as[0]=ffffffc0f9010be0 [ 0.348477] iommu: Adding device 700d0000.xudc to group 33 [ 0.351506] vdd-ac-bat: 5000 mV [ 0.351833] vdd-5v0-sys: 5000 mV [ 0.352774] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.352818] vdd-5v0-hdmi: 5000 mV [ 0.353213] vdd-1v8-sys: 1800 mV [ 0.353587] vdd-fan: supplied by vdd-5v0-sys [ 0.353652] vdd-fan: 5000 mV [ 0.354062] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.354103] vdd-usb-vbus: 5000 mV [ 0.354588] vdd-usb-vbus2: 5000 mV [ 0.367556] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.369860] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.371093] GPIO line 200 (camera-control-output-low) hogged as output/low [ 0.371132] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.371479] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.379238] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.379535] SCSI subsystem initialized [ 0.379773] libata version 3.00 loaded. [ 0.379962] usbcore: registered new interface driver usbfs [ 0.380063] usbcore: registered new interface driver hub [ 0.380127] usbcore: registered new device driver usb [ 0.384107] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.388103] vdd-core: 1000 <--> 1162 mV at 1075 mV [ 0.389112] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.390991] vdd-ddr-1v1: 1150 mV [ 0.392990] vdd-pre-reg-1v35: 1350 mV [ 0.394991] vdd-1v8: 1800 mV [ 0.396989] avdd-sys-1v2: 1200 mV [ 0.398988] vdd-pex-1v0: 1050 mV [ 0.399647] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.400248] max77620-ldo3: at 3100 mV [ 0.402009] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.402568] max77620-ldo5: at 3100 mV [ 0.404991] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.406990] avdd-1v05-pll: 1050 mV [ 0.408990] avdd-io-hdmi-dp: 1050 mV [ 0.411708] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.412000] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.412304] max77620 4-003c: max77620 probe successful [ 0.415258] media: Linux media interface: v0.10 [ 0.415295] Linux video capture interface: v2.00 [ 0.416119] pps_core: LinuxPPS API ver. 1 registered [ 0.416125] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.416144] PTP clock support registered [ 0.419207] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.419903] Advanced Linux Sound Architecture Driver Initialized. [ 0.420568] Bluetooth: Core ver 2.22 [ 0.420603] NET: Registered protocol family 31 [ 0.420606] Bluetooth: HCI device and connection manager initialized [ 0.420617] Bluetooth: HCI socket layer initialized [ 0.420625] Bluetooth: L2CAP socket layer initialized [ 0.420649] Bluetooth: SCO socket layer initialized [ 0.422305] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.422321] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.422372] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.422386] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.424888] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.426001] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.426146] vdd-3v3-sys: 3300 mV [ 0.426387] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.428136] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.428635] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.428677] vdd-3v3-sd: 3300 mV [ 0.429735] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.429785] avdd-io-edp-1v05: 1050 mV [ 0.430239] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.430283] vdd-usb-hub-en: 5000 mV [ 0.430726] vdd-3v3-sd-nova: supplied by vdd-3v3-sys [ 0.430763] vdd-3v3-sd-nova: 3300 mV [ 0.432000] camchar: rtcpu character device driver loaded [ 0.432702] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.433868] clocksource: Switched to clocksource arch_sys_counter [ 0.485040] VFS: Disk quotas dquot_6.6.0 [ 0.485173] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.485630] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.486247] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.486264] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.486528] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.486534] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.486545] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.486570] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.486575] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.486591] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.486598] nvmap_page_pool_init: Total RAM pages: 1010455 [ 0.486602] nvmap_page_pool_init: nvmap page pool size: 126306 pages (493 MB) [ 0.486699] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.487204] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.488114] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.496357] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.496706] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.496960] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.497156] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.497317] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.497598] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.497601] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.498094] NET: Registered protocol family 2 [ 0.499176] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.499434] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) [ 0.501264] TCP: Hash tables configured (established 32768 bind 32768) [ 0.501440] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.501711] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.502693] NET: Registered protocol family 1 [ 0.503578] RPC: Registered named UNIX socket transport module. [ 0.503582] RPC: Registered udp transport module. [ 0.503585] RPC: Registered tcp transport module. [ 0.503588] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.503602] PCI: CLS 0 bytes, default 64 [ 0.504010] Trying to unpack rootfs image as initramfs... [ 0.615286] Freeing initrd memory: 2024K [ 0.625230] host1x 50000000.host1x: initialized [ 0.627072] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.630768] audit: initializing netlink subsys (disabled) [ 0.630924] audit: type=2000 audit(0.476:1): initialized [ 0.631697] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.642379] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.643777] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.644631] 9p: Installing v9fs 9p2000 file system support [ 0.648498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.648648] io scheduler noop registered [ 0.649098] io scheduler cfq registered (default) [ 0.651661] gic 702f9000.agic: GIC IRQ controller registered [ 0.654707] iommu: Adding device 702ef000.adsp to group 34 [ 0.663851] iommu: Adding device aconnect@702c0000:adsp_audio to group 35 [ 0.664058] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.664576] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x9208c12 [ 0.664584] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.666437] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.666524] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.666614] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.666784] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.666925] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.667009] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.667093] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.667170] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.667251] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.667333] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.673782] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.675360] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.677273] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.678550] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.679346] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.680330] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.680566] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 0.680844] Adding domain tsec-pd to PM domain host1x-pd [ 0.682772] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.683655] tsec 54500000.tsec: initialized [ 0.685247] tsec 54100000.tsecb: initialized [ 0.685929] Adding domain nvdec-pd to PM domain host1x-pd [ 0.688745] nvdec 54480000.nvdec: initialized [ 0.689695] Adding domain vic03-pd to PM domain host1x-pd [ 0.689922] Adding domain msenc-pd to PM domain host1x-pd [ 0.690087] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.693499] falcon 54340000.vic: initialized [ 0.694745] falcon 544c0000.nvenc: initialized [ 0.696228] falcon 54380000.nvjpg: initialized [ 0.700358] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 0.700400] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 0.700432] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 0.700502] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 0.700609] display board info: id 0x0, fab 0x0 [ 0.700654] tegradc tegradc.0: tegra_dc_parse_panel_ops: panel: /host1x/sor1/hdmi-display is not active [ 0.700686] tegradc tegradc.0: err:-19 parsing panel_ops [ 0.701225] tegradc tegradc.1: disp0 connected to head1->/host1x/sor [ 0.701231] display board info: id 0x0, fab 0x0 [ 0.701262] tegradc tegradc.1: tegra_dc_parse_panel_ops: panel: /host1x/sor/dp-display is not active [ 0.701278] tegradc tegradc.1: err:-19 parsing panel_ops [ 0.701622] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 0.701627] tegra_cec 70015000.tegra_cec: probed [ 0.711032] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.716256] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 0.716743] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 0.716748] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.717031] kfuse 7000fc00.kfuse: initialized [ 0.717998] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 0.718926] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.719756] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.719767] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.720196] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.721568] vdd-gpu: applied init 1000000uV constraint [ 0.721575] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 0.721992] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.725546] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.725653] No Device Node present for smmu client: serial8250 !! [ 0.725662] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.725699] iommu: Adding device serial8250 to group 36 [ 0.727834] console [ttyS0] disabled [ 0.727974] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 0.757183] console [ttyS0] enabled [ 0.757816] 70006300.serial: ttyS3 at MMIO 0x70006300 (irq = 66, base_baud = 25500000) is a Tegra [ 0.758652] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 0.758981] serial-tegra 70006200.serial: RX in PIO mode [ 0.759065] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 0.759981] [drm] Initialized [ 0.770811] brd: module loaded [ 0.776738] loop: module loaded [ 0.776836] tegra_profiler: version: 1.141, samples/io: 48/28 [ 0.776986] tegra_profiler: auth: init [ 0.778297] THERMAL EST: found 2 subdevs [ 0.778308] THERMAL EST num_resources: 0 [ 0.778325] [THERMAL EST subdev 0] [ 0.778333] [THERMAL EST subdev 1] [ 0.778771] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 0.778774] THERMAL EST: thz register success. [ 0.779035] THERMAL EST: end of probe, return err: 0 [ 0.780108] sd: No Scsi addr parsed to reserve index [ 0.780144] hisi_sas: driver version v1.6 [ 0.786711] libphy: Fixed MDIO Bus: probed [ 0.787332] tun: Universal TUN/TAP device driver, 1.6 [ 0.787335] tun: (C) 1999-2004 Max Krasnyansky [ 0.788229] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.788233] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.788284] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.788287] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.788328] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.788332] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.788372] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 0.788376] Copyright(c) 1999 - 2017 Intel Corporation. [ 0.789423] PPP generic driver version 2.4.2 [ 0.789592] PPP BSD Compression module registered [ 0.789596] PPP Deflate Compression module registered [ 0.789636] PPP MPPE Compression module registered [ 0.789643] NET: Registered protocol family 24 [ 0.789714] usbcore: registered new interface driver r8152 [ 0.789759] usbcore: registered new interface driver asix [ 0.789793] usbcore: registered new interface driver ax88179_178a [ 0.789821] usbcore: registered new interface driver cdc_ether [ 0.789850] usbcore: registered new interface driver net1080 [ 0.789932] usbcore: registered new interface driver cdc_subset [ 0.789967] usbcore: registered new interface driver zaurus [ 0.790012] usbcore: registered new interface driver cdc_ncm [ 0.790171] VFIO - User Level meta-driver version: 0.3 [ 0.793240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.793278] ehci-pci: EHCI PCI platform driver [ 0.793317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.793331] ohci-pci: OHCI PCI platform driver [ 0.793371] ohci-platform: OHCI generic platform driver [ 0.796446] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 0.797078] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 0.798339] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9056800 id [ 0.800412] usbcore: registered new interface driver uas [ 0.800486] usbcore: registered new interface driver usb-storage [ 0.800605] usbcore: registered new interface driver usbserial [ 0.801060] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 0.801121] tegra-xusb 70090000.xusb: xHCI Host Controller [ 0.801150] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 0.802000] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 0.802175] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 0.802379] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.802386] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.802391] usb usb1: Product: xHCI Host Controller [ 0.802395] usb usb1: Manufacturer: Linux 4.9.140-rt93+ xhci-hcd [ 0.802399] usb usb1: SerialNumber: 70090000.xusb [ 0.803122] hub 1-0:1.0: USB hub found [ 0.803169] hub 1-0:1.0: 5 ports detected [ 0.804048] tegra-xusb 70090000.xusb: xHCI Host Controller [ 0.804068] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 0.804184] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.804225] tegra-xudc-new 700d0000.xudc: device count: 1 [ 0.804298] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.804304] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.804309] usb usb2: Product: xHCI Host Controller [ 0.804314] usb usb2: Manufacturer: Linux 4.9.140-rt93+ xhci-hcd [ 0.804319] usb usb2: SerialNumber: 70090000.xusb [ 0.804833] hub 2-0:1.0: USB hub found [ 0.804920] hub 2-0:1.0: 4 ports detected [ 0.805676] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 0.805689] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 0.805706] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 0.805730] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 0.805756] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 0.806441] mousedev: PS/2 mouse device common for all mice [ 0.806529] usbcore: registered new interface driver xpad [ 0.879588] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 0.882004] rtc rtc1: alarm rtc device [ 0.882023] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 0.882056] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 0.882519] i2c /dev entries driver [ 0.884047] pca954x 6-0070: vcc-pullup regulator not found [ 0.884069] pca954x 6-0070: pca954x_probe: forcing device bus number, start 30. [ 0.884074] pca954x 6-0070: device detect skipped. [ 0.884491] i2c i2c-6: Added multiplexed i2c bus 30 [ 0.884728] i2c i2c-6: Added multiplexed i2c bus 31 [ 0.884990] i2c i2c-6: Added multiplexed i2c bus 32 [ 0.885196] i2c i2c-6: Added multiplexed i2c bus 33 [ 0.885396] i2c i2c-6: Added multiplexed i2c bus 34 [ 0.885593] i2c i2c-6: Added multiplexed i2c bus 35 [ 0.885809] i2c i2c-6: Added multiplexed i2c bus 36 [ 0.886053] i2c i2c-6: Added multiplexed i2c bus 37 [ 0.886061] pca954x 6-0070: registered 8 multiplexed busses for I2C switch pca9548 [ 0.887219] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 0.889662] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 0.889669] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 0.890248] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.890266] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 0.890275] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 0.890447] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.890459] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 0.890466] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 0.890619] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.890631] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 0.890636] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 0.890827] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 0.891706] tegra_aotag tegra-aotag: Registering sensor 0 [ 0.891766] tegra_aotag tegra-aotag: Invalid temp readout [ 0.891797] tegra_aotag tegra-aotag: Invalid temp readout [ 0.891818] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 0.891827] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 0.892739] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.892764] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 0.892982] tegra_aotag tegra-aotag: Invalid temp readout [ 0.893015] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 0.893384] parse_throttle_dt_data: Num cap clks = 6 [ 0.893391] parse_throttle_dt_data: clk=cclk_g type=2 [ 0.893403] parse_throttle_dt_data: clk=gpu type=4 [ 0.893429] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 0.893448] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 0.893469] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 0.893473] parse_throttle_dt_data: clk=emc type=3 [ 0.893915] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.894017] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 0.894162] tegra_throttle_probe: probe successful. #cdevs=4 [ 0.894842] FAN dev name: pwm-fan [ 0.895001] FAN:gpio request success. [ 0.895090] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 0.895397] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 0.895596] pwm_fan_driver pwm-fan: fan tach request irq success [ 0.895607] pwm_fan_driver pwm-fan: tach period: 1000 [ 0.895719] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 0.895726] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 0.895731] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 0.895736] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 0.895741] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 0.895745] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 0.895750] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 0.895755] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 0.895760] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 0.895765] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 0.897227] device-mapper: uevent: version 1.0.3 [ 0.897759] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 0.903193] tegra210-cpufreq cpufreq: probe()...completed [ 0.903836] sdhci: Secure Digital Host Controller Interface driver [ 0.903838] sdhci: Copyright(c) Pierre Ossman [ 0.903840] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.904198] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 0.904936] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 0.907153] sdhci-tegra sdhci-tegra.2: Got CD GPIO [ 0.907503] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 0.908533] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 0.909976] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 0.910095] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 0.915294] tegra-se 70012000.se: tegra_se_probe: complete [ 0.915769] hidraw: raw HID events driver (C) Jiri Kosina [ 0.916775] usbcore: registered new interface driver usbhid [ 0.916777] usbhid: USB HID core driver [ 0.918903] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 0.919098] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 0.920999] nvpmodel: initialized successfully [ 0.922056] usbcore: registered new interface driver snd-usb-audio [ 0.922116] No Device Node present for smmu client: snd-soc-dummy !! [ 0.922121] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.922144] iommu: Adding device snd-soc-dummy to group 37 [ 0.928037] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 0.931873] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 0.933974] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 0.942012] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 0.942883] OPE platform probe [ 0.942992] OPE platform probe successful [ 0.943250] OPE platform probe [ 0.943352] OPE platform probe successful [ 0.967633] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 0.967775] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 0.967940] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 0.968082] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 0.968221] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 0.968354] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 0.968486] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 0.968619] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 0.968750] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 0.968905] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 0.983782] u32 classifier [ 0.983785] Actions configured [ 0.983886] Initializing XFRM netlink socket [ 0.988995] NET: Registered protocol family 10 [ 0.989695] NET: Registered protocol family 17 [ 0.989707] NET: Registered protocol family 15 [ 0.989789] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.989925] Bluetooth: RFCOMM socket layer initialized [ 0.989938] Bluetooth: RFCOMM ver 1.11 [ 0.989944] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.989952] Bluetooth: HIDP socket layer initialized [ 0.989969] 9pnet: Installing 9P2000 support [ 0.989987] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 0.989999] Key type dns_resolver registered [ 0.990350] Registered cp15_barrier emulation handler [ 0.990383] Registered setend emulation handler [ 0.990432] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 0.991672] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 0.991783] registered taskstats version 1 [ 0.992354] Adding domain ve2-pd to PM domain host1x-pd [ 0.992605] Adding domain ve-pd to PM domain host1x-pd [ 0.992892] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 0.994073] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 0.994740] isp 54600000.isp: initialized [ 0.994955] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 0.997972] isp 54680000.isp: initialized [ 1.012332] last reset is due to power on reset [ 1.012336] KERNEL: PMC reset status reg: 0x0 [ 1.012413] BL: PMC reset status reg: 0x0 [ 1.012415] BL: PMIC poweroff Event Recorder: 0x40 [ 1.013919] clk_cbus_recalc_rate: no gbus parent [ 1.013925] clk_cbus_round_rate: no gbus parent [ 1.013927] clk_cbus_round_rate: no gbus parent [ 1.013935] clk_cbus_recalc_rate: no gbus parent [ 1.014028] clk_cbus_recalc_rate: no gbus parent [ 1.014032] clk_cbus_round_rate: no gbus parent [ 1.014034] clk_cbus_round_rate: no gbus parent [ 1.014038] clk_cbus_recalc_rate: no gbus parent [ 1.014726] tegra_dvfs: GPU-cap: registered [ 1.014787] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.014790] tegra dvfs: vdd-core: nominal 1075mV, offset 1000000uV, step 12500uV, scaling enabled [ 1.014792] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 1.016104] tegra_dvfs: vdd-gpu-vts: registered [ 1.016587] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.017162] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.017919] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.051673] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:09 UTC (946688409) [ 1.052638] vi 54080000.vi: vi_probe: ++ [ 1.055611] vi 54080000.vi: initialized [ 1.057681] vi 54080000.vi: subdev nvcsi--1 bound [ 1.057919] mmcblk mmc0:0001: Card claimed for testing. [ 1.059069] Disable partitions left on by BL [ 1.059073] disb [ 1.059117] bwmgr: missing cdev-type property [ 1.059206] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.059212] DRAM derating cdev registered. [ 1.060179] vdd-5v0-hdmi: disabling [ 1.060183] vdd-fan: disabling [ 1.060186] vdd-usb-vbus: disabling [ 1.060189] vdd-usb-vbus2: disabling [ 1.060199] vddio-sdmmc3-ap: disabling [ 1.060290] vdd-3v3-sd: disabling [ 1.060293] avdd-io-edp-1v05: disabling [ 1.060295] vdd-usb-hub-en: disabling [ 1.060298] vdd-3v3-sd-nova: disabling [ 1.060391] ALSA device list: [ 1.060395] #0: tegra-hda at 0x70038000 irq 82 [ 1.060397] #1: tegra-snd-t210ref-mobile-rt565x [ 1.064157] Freeing unused kernel memory: 8576K [ 1.074207] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 1.083184] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 1.103876] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.106449] random: fast init done [ 1.112896] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.136021] usb 1-2: New USB device found, idVendor=0cf3, idProduct=9271 [ 1.136026] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 1.136030] usb 1-2: Product: UB91C [ 1.136033] usb 1-2: Manufacturer: ATHEROS [ 1.136035] usb 1-2: SerialNumber: 12345 [ 1.170457] EXT4-fs (mmcblk0p1): recovery complete [ 1.171287] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.286780] fuse init (API version 7.26) [ 1.367781] udevd[309]: starting version 3.2.9 [ 1.369709] random: udevd: uninitialized urandom read (16 bytes read) [ 1.370055] random: udevd: uninitialized urandom read (16 bytes read) [ 1.370081] random: udevd: uninitialized urandom read (16 bytes read) [ 1.392746] udevd[309]: specified group 'crypto' unknown [ 1.398126] udevd[309]: specified group 'trusty' unknown [ 1.405767] udevd[310]: starting eudev-3.2.9 [ 1.477290] imx477 30-001a: probing v4l2 sensor. [ 1.477295] probing v4l2 sensor. [ 1.477491] imx477 30-001a: imx477_probe: name trigger_a [ 1.477500] imx477 30-001a: imx477_probe: name exposure_a [ 1.477524] imx477 30-001a: imx477_ctrls_init++ [ 1.477543] vi 54080000.vi: subdev imx477 30-001a bound [ 1.480215] I2C client: 26 [ 1.480223] imx477 30-001a: Detected IMX477 sensor [ 1.480224] Detected IMX477 sensor [ 1.505884] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.558469] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 1.612400] imx477 30-001a: imx477_open: [ 1.612965] imx477 30-001a: imx477_power_on: power on [ 1.613349] imx477 30-001a: imx477_s_stream++,enable:1 [ 1.720892] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 1.720917] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 1.739652] usb 1-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 1.744921] usbcore: registered new interface driver ath9k_htc [ 1.823582] imx477 30-001a: imx477_s_stream mode[0] [ 1.886435] imx477 30-001a: imx477_s_stream++,enable:0 [ 1.907889] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.909908] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.027522] usb 1-2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 2.052457] imx477 30-001a: imx477_power_off: power off [ 2.052586] imx477 30-001a: imx477_power_on: power on [ 2.053118] imx477 30-001a: imx477_power_off: power off [ 2.280515] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits [ 2.318489] tegra-pcie 1003000.pcie: link 1 down, retrying [ 2.544527] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.4 [ 2.544532] ath9k_htc 1-2:1.0: FW RMW support: On [ 2.544536] ath: EEPROM regdomain: 0x0 [ 2.544538] ath: EEPROM indicates default country code should be used [ 2.544540] ath: doing EEPROM country->regdmn map search [ 2.544544] ath: country maps to regdmn code: 0x3a [ 2.544546] ath: Country alpha2 being used: US [ 2.544548] ath: Regpair used: 0x3a [ 2.549888] ieee80211 phy0: Atheros AR9271 Rev:1 [ 2.732481] tegra-pcie 1003000.pcie: link 1 down, retrying [ 3.148174] tegra-pcie 1003000.pcie: link 1 down, retrying [ 3.150252] tegra-pcie 1003000.pcie: link 1 down, ignoring [ 3.352377] tegra-pcie 1003000.pcie: PCIE: no end points detected [ 3.352497] tegra-pcie 1003000.pcie: PCIE: Disable power rails [ 4.961633] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 4.961638] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 4.979816] g_serial gadget: Gadget Serial v2.4 [ 4.979820] g_serial gadget: g_serial ready [ 4.979838] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.000184] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 5.065106] usb usb2: usb_suspend_both: status 0 [ 5.534997] g_serial gadget: high-speed config #2: CDC ACM config [ 5.535025] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 5.535040] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 5.535055] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 6.876444] urandom_read: 4 callbacks suppressed [ 6.876446] random: dd: uninitialized urandom read (512 bytes read) [ 7.271732] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.336357] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 7.340803] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 7.641085] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.672880] FAN rising trip_level:1 cur_temp:52000 trip_temps[2]:61000 [ 9.913159] wlan0: Trigger new scan to find an IBSS to join [ 11.322921] random: crng init done [ 11.910220] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.154969] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.529221] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.878236] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.894646] wlan0: Selected IBSS BSSID 9e:ea:02:bc:a0:48 based on configured SSID [ 15.091259] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 101.138071] mmc1: Enabling vmmc regulator