[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (jetsonhostpc@jetsonhostpc-Vostro-470) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 11:50:09 KST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29284(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3568508K/4159488K available (15294K kernel code, 2942K rwdata, 6752K rodata, 8576K init, 609K bss, 115844K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009610000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e70000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a14f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a14f808 - 0xffffff800a1e7cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001700] Console: colour dummy device 80x25 [ 0.001710] console [tty0] enabled [ 0.001716] bootconsole [uart8250] disabled [ 0.001733] kmemleak: Kernel memory leak detector disabled [ 0.001754] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001767] pid_max: default: 32768 minimum: 301 [ 0.002217] Security Framework initialized [ 0.002434] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002442] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003555] ftrace: allocating 47208 entries in 185 pages [ 0.172471] sched-energy: CPU device node has no sched-energy-costs [ 0.172501] ASID allocator initialised with 65536 entries [ 0.211773] tegra-id: chipid=22117. [ 0.211786] tegra-id: opt_subrevision=0. [ 0.211803] Tegra Speedo/IDDQ fuse revision 4 [ 0.211808] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211812] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.211819] Tegra: CPU Speedo Value 2091, SoC Speedo Value 1985, GPU Speedo Value 2093 [ 0.211824] Tegra: CPU IDDQ Value 2272, SoC IDDQ Value 2400, GPU IDDQ Value 2925 [ 0.211843] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.211857] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.211865] DTB Build time: Nov 19 2020 19:43:58 [ 0.261043] CPU1: Booted secondary processor [411fd071] [ 0.292947] CPU2: Booted secondary processor [411fd071] [ 0.324922] CPU3: Booted secondary processor [411fd071] [ 0.325018] Brought up 4 CPUs [ 0.325024] SMP: Total of 4 processors activated. [ 0.325034] CPU features: detected feature: 32-bit EL0 Support [ 0.325291] CPU: All CPU(s) started at EL2 [ 0.325307] alternatives: patching kernel code [ 0.333460] devtmpfs: initialized [ 0.372748] Initilizing CustomIPI irq domain [ 0.373181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.373204] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.383638] pinctrl core: initialized pinctrl subsystem [ 0.384237] OS set in device tree is not L4T. [ 0.384681] regulator-dummy: no parameters [ 0.384949] Initializing plugin-manager [ 0.385133] Plugin module not found [ 0.385331] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.385856] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.386298] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.387017] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.387221] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.387788] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.389756] node /plugin-manager/fragement@13 match with board >=3448-0002-300 [ 0.393509] NET: Registered protocol family 16 [ 0.394922] pstore: using zlib compression [ 0.394958] console [pstore-1] enabled [ 0.394962] pstore: Registered ramoops as persistent store backend [ 0.394968] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405063] cpuidle: using governor menu [ 0.409147] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.410894] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e74000) [ 0.410915] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413506] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.415919] Serial: AMBA PL011 UART driver [ 0.416395] tegra_powergate_init: DONE [ 0.416409] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.416415] DTB Build time: Nov 19 2020 19:43:58 [ 0.418331] Tegra reboot handler registered. [ 0.422869] iommu: Adding device tegra-carveouts to group 0 [ 0.423014] platform tegra-carveouts: domain=ffffffc0f9be83d8 allocates as[0]=ffffffc0f944c0a8 [ 0.423368] iommu: Adding device smmu_test to group 1 [ 0.423415] platform smmu_test: domain=ffffffc0f9be8618 allocates as[0]=ffffffc0f944c110 [ 0.424215] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.424268] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.424325] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.424333] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.424359] mc-err: mcerr ops are set to t21x [ 0.434999] iommu: Adding device 70090000.xusb to group 2 [ 0.435284] iommu: Adding device 70006000.serial to group 3 [ 0.435368] platform 70006000.serial: domain=ffffffc0f94d6558 allocates as[0]=ffffffc0f944c178 [ 0.435784] iommu: Adding device 70006040.serial to group 4 [ 0.436053] iommu: Adding device 70006200.serial to group 5 [ 0.436275] iommu: Adding device sound to group 6 [ 0.436317] platform sound: domain=ffffffc0f94d6a98 allocates as[0]=ffffffc0f944c1e0 [ 0.436858] iommu: Adding device 7000d400.spi to group 7 [ 0.437147] iommu: Adding device 7000d600.spi to group 8 [ 0.437492] iommu: Adding device 50000000.host1x to group 9 [ 0.437762] iommu: Adding device 54080000.vi to group 10 [ 0.438152] iommu: Adding device 54600000.isp to group 11 [ 0.438405] iommu: Adding device 54680000.isp to group 12 [ 0.438671] iommu: Adding device tegradc.0 to group 13 [ 0.438749] platform tegradc.0: domain=ffffffc0f94e0858 allocates as[0]=ffffffc0f944c248 [ 0.439268] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.439588] iommu: Adding device tegradc.1 to group 14 [ 0.439639] platform tegradc.1: domain=ffffffc0f94e0a98 allocates as[0]=ffffffc0f944c2b0 [ 0.440150] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.440395] iommu: Adding device 54340000.vic to group 15 [ 0.440605] iommu: Adding device 544c0000.nvenc to group 16 [ 0.440797] iommu: Adding device 54500000.tsec to group 17 [ 0.441046] iommu: Adding device 54100000.tsecb to group 18 [ 0.441257] iommu: Adding device 54480000.nvdec to group 19 [ 0.441445] iommu: Adding device 54380000.nvjpg to group 20 [ 0.442524] iommu: Adding device 546c0000.i2c to group 21 [ 0.442865] iommu: Adding device 57000000.gpu to group 22 [ 0.442915] platform 57000000.gpu: domain=ffffffc0f94eba98 allocates as[0]=ffffffc0f944c318 [ 0.442950] platform 57000000.gpu: domain=ffffffc0f94eba98 allocates as[1]=ffffffc0f944c380 [ 0.442989] platform 57000000.gpu: domain=ffffffc0f94eba98 allocates as[2]=ffffffc0f944c3e8 [ 0.443027] platform 57000000.gpu: domain=ffffffc0f94eba98 allocates as[3]=ffffffc0f944c450 [ 0.443916] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.443926] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.443938] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.443942] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.443946] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.497115] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497125] tegra-pmc: Clear bootloader IO dpd settings [ 0.497148] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497214] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497517] iommu: Adding device 70012000.se to group 23 [ 0.498356] iommu: Adding device 7000c000.i2c to group 24 [ 0.498656] iommu: Adding device 7000c400.i2c to group 25 [ 0.498965] iommu: Adding device 7000c500.i2c to group 26 [ 0.499220] iommu: Adding device 7000c700.i2c to group 27 [ 0.499516] iommu: Adding device 7000d000.i2c to group 28 [ 0.499791] iommu: Adding device 7000d100.i2c to group 29 [ 0.500108] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.500168] platform sdhci-tegra.3: domain=ffffffc0f958cc18 allocates as[0]=ffffffc0f944c4b8 [ 0.501134] iommu: Adding device 700d0000.xudc to group 31 [ 0.504608] vdd-ac-bat: 5000 mV [ 0.504963] vdd-5v0-sys: 5000 mV [ 0.505963] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.506031] vdd-5v0-hdmi: 5000 mV [ 0.506428] vdd-1v8-sys: 1800 mV [ 0.506817] vdd-fan: supplied by vdd-5v0-sys [ 0.506852] vdd-fan: 5000 mV [ 0.507289] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.507350] vdd-usb-vbus: 5000 mV [ 0.507882] vdd-usb-vbus2: 5000 mV [ 0.541944] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.544286] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.545525] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.545546] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.545582] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.545958] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.553918] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.554277] SCSI subsystem initialized [ 0.554494] libata version 3.00 loaded. [ 0.554770] usbcore: registered new interface driver usbfs [ 0.554822] usbcore: registered new interface driver hub [ 0.554899] usbcore: registered new device driver usb [ 0.558911] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.564333] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.565004] random: fast init done [ 0.565363] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.568233] vdd-ddr-1v1: 1150 mV [ 0.573056] vdd-pre-reg-1v35: 1350 mV [ 0.577056] vdd-1v8: 1800 mV [ 0.581056] avdd-sys-1v2: 1200 mV [ 0.585054] vdd-pex-1v0: 1050 mV [ 0.585685] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.586249] max77620-ldo3: at 3100 mV [ 0.589057] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.589603] max77620-ldo5: at 3100 mV [ 0.593055] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.597053] avdd-1v05-pll: 1050 mV [ 0.601054] avdd-io-hdmi-dp: 1050 mV [ 0.603706] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.603982] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.604263] max77620 4-003c: max77620 probe successful [ 0.606904] media: Linux media interface: v0.10 [ 0.606974] Linux video capture interface: v2.00 [ 0.607840] pps_core: LinuxPPS API ver. 1 registered [ 0.607847] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.607874] PTP clock support registered [ 0.611198] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.612209] Advanced Linux Sound Architecture Driver Initialized. [ 0.612916] Bluetooth: Core ver 2.22 [ 0.612959] NET: Registered protocol family 31 [ 0.612962] Bluetooth: HCI device and connection manager initialized [ 0.612976] Bluetooth: HCI socket layer initialized [ 0.612984] Bluetooth: L2CAP socket layer initialized [ 0.613010] Bluetooth: SCO socket layer initialized [ 0.614742] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.614758] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.614805] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.614820] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.618392] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.619547] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.619614] vdd-3v3-sys: 3300 mV [ 0.619904] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.621129] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.621604] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.621638] vdd-3v3-sd: 3300 mV [ 0.622693] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.622757] avdd-io-edp-1v05: 1050 mV [ 0.623178] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.623212] vdd-usb-hub-en: 5000 mV [ 0.624514] camchar: rtcpu character device driver loaded [ 0.625234] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.626651] clocksource: Switched to clocksource arch_sys_counter [ 0.666638] VFS: Disk quotas dquot_6.6.0 [ 0.666815] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.667285] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.667704] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.667725] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.667913] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.667918] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.667930] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.667956] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.667963] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.667974] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.667981] nvmap_page_pool_init: Total RAM pages: 1010911 [ 0.667986] nvmap_page_pool_init: nvmap page pool size: 126363 pages (493 MB) [ 0.668066] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.668530] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.669426] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.677949] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.678408] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.678824] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.679131] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.679316] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.679579] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.679583] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.680012] NET: Registered protocol family 2 [ 0.680971] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.681184] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.681674] TCP: Hash tables configured (established 32768 bind 32768) [ 0.681813] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.681892] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.682303] NET: Registered protocol family 1 [ 0.683299] RPC: Registered named UNIX socket transport module. [ 0.683306] RPC: Registered udp transport module. [ 0.683309] RPC: Registered tcp transport module. [ 0.683313] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.683326] PCI: CLS 0 bytes, default 64 [ 0.683561] Trying to unpack rootfs image as initramfs... [ 0.986088] Freeing initrd memory: 6992K [ 0.996118] host1x 50000000.host1x: initialized [ 0.998016] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.001249] audit: initializing netlink subsys (disabled) [ 1.001338] audit: type=2000 audit(0.851:1): initialized [ 1.002101] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.011892] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.013359] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.014138] 9p: Installing v9fs 9p2000 file system support [ 1.017405] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.017545] io scheduler noop registered [ 1.017838] io scheduler cfq registered (default) [ 1.020670] gic 702f9000.agic: GIC IRQ controller registered [ 1.023657] iommu: Adding device 702ef000.adsp to group 32 [ 1.032771] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 1.032950] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.033532] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0xa1e8c10 [ 1.033540] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.035420] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.035522] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.035607] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.035793] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.035886] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.035969] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.036053] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.036135] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.036220] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.036300] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.042324] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.044080] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.045988] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.047227] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.047574] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.048776] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.048996] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.049241] Adding domain tsec-pd to PM domain host1x-pd [ 1.051661] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.052573] tsec 54500000.tsec: initialized [ 1.054165] tsec 54100000.tsecb: initialized [ 1.054884] Adding domain nvdec-pd to PM domain host1x-pd [ 1.058356] nvdec 54480000.nvdec: initialized [ 1.059442] Adding domain vic03-pd to PM domain host1x-pd [ 1.059622] Adding domain msenc-pd to PM domain host1x-pd [ 1.059783] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.063984] falcon 54340000.vic: initialized [ 1.065206] falcon 544c0000.nvenc: initialized [ 1.066547] falcon 54380000.nvjpg: initialized [ 1.070788] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 1.070834] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.070864] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.071157] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.071164] tegra_cec 70015000.tegra_cec: probed [ 1.071168] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.071273] display board info: id 0x0, fab 0x0 [ 1.071344] generic_infoframe_type: 0x87 [ 1.071491] tegradc tegradc.0: DT parsed successfully [ 1.071538] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.079160] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.084454] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.085157] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.085165] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.085435] kfuse 7000fc00.kfuse: initialized [ 1.086362] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.087220] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.088176] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.088187] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.088558] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.089818] vdd-gpu: applied init 1000000uV constraint [ 1.089826] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.090167] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.093469] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.093480] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.093486] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.093492] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.093499] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.093538] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.093639] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.093879] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.093953] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.094141] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.094153] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.094317] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 1.094345] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.094378] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.094402] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 1.094555] pci 0000:01:00.0: supports D1 D2 [ 1.094559] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.098386] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.098485] No Device Node present for smmu client: serial8250 !! [ 1.098494] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.098533] iommu: Adding device serial8250 to group 34 [ 1.100905] console [ttyS0] disabled [ 1.100981] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.101083] console [ttyS0] enabled [ 1.101925] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.102195] serial-tegra 70006200.serial: RX in PIO mode [ 1.102285] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.103492] [drm] Initialized [ 1.106823] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.107066] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.107098] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.107134] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 1.107158] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.107327] pci 0000:02:00.0: supports D1 D2 [ 1.107333] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.111441] tegradc tegradc.0: probed [ 1.112370] Console: switching to colour frame buffer device 240x67 [ 1.112496] tegradc tegradc.0: fb registered [ 1.115572] brd: module loaded [ 1.118774] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.118867] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.118879] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 1.118886] pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.118892] pci 0000:00:02.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1.118904] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 1.118926] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 1.118946] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.118957] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.118963] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 1.118970] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.118983] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 1.119004] pci 0000:02:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 1.119024] pci 0000:02:00.0: BAR 0: assigned [io 0x2000-0x20ff] [ 1.119032] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.119038] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] [ 1.119046] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 1.119635] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.119643] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.119650] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.119788] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.120072] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.120079] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.120085] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.120238] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.121640] loop: module loaded [ 1.121747] tegra_profiler: version: 1.143, samples/io: 48/28 [ 1.121866] tegra_profiler: auth: init [ 1.123286] THERMAL EST: found 2 subdevs [ 1.123294] THERMAL EST num_resources: 0 [ 1.123301] [THERMAL EST subdev 0] [ 1.123308] [THERMAL EST subdev 1] [ 1.123746] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.123750] THERMAL EST: thz register success. [ 1.123901] THERMAL EST: end of probe, return err: 0 [ 1.125154] sd: No Scsi addr parsed to reserve index [ 1.125194] hisi_sas: driver version v1.6 [ 1.131643] libphy: Fixed MDIO Bus: probed [ 1.132491] tun: Universal TUN/TAP device driver, 1.6 [ 1.132497] tun: (C) 1999-2004 Max Krasnyansky [ 1.133587] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.133594] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.133664] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.133667] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.133715] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.133719] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.133769] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.133773] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.139108] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 1.139142] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.148712] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.148820] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 1.149923] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.153549] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.153698] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ea:62:7f from device tree [ 1.154351] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.154405] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.154594] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 1.154616] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.175864] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.175930] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:ea:62:7f from device tree [ 1.176426] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.176445] sysfs: cannot create duplicate filename '/kernel/rt8168_power' [ 1.176496] ------------[ cut here ]------------ [ 1.176524] WARNING: CPU: 3 PID: 1 at /home/jetsonhostpc/coding/nano_sdcard_build_kernel/Linux_for_Tegra/source/public/kernel/kernel-4.9/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 [ 1.176528] Modules linked in: [ 1.176545] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.9.201-tegra #1 [ 1.176550] Hardware name: NVIDIA Jetson Nano Developer Kit (DT) [ 1.176553] task: ffffffc0fa6f0000 task.stack: ffffffc0fa66c000 [ 1.176559] PC is at sysfs_warn_dup+0x68/0x88 [ 1.176565] LR is at sysfs_warn_dup+0x68/0x88 [ 1.176569] pc : [] lr : [] pstate: 40400045 [ 1.176572] sp : ffffffc0fa66f9a0 [ 1.176575] x29: ffffffc0fa66f9a0 x28: ffffffc0f90090a0 [ 1.176584] x27: 0000000000000000 x26: ffffff800904e000 [ 1.176591] x25: ffffff800a1b6130 x24: ffffffc0f7b38918 [ 1.176598] x23: ffffff800a3ec000 x22: ffffffc0f9af3f40 [ 1.176605] x21: ffffffc0f9afd258 x20: ffffff80094a0168 [ 1.176612] x19: ffffffc0f9739000 x18: 00000000ffffffee [ 1.176618] x17: 0000000000000000 x16: 0000000000000000 [ 1.176625] x15: 0000000000000007 x14: 73746e6574617020 [ 1.176632] x13: 676e69776f6c6c6f x12: 0000000000000000 [ 1.176639] x11: 0000000000000004 x10: 00000000000001d9 [ 1.176646] x9 : 0000000000000000 x8 : ffffffc0fef92120 [ 1.176652] x7 : 0000000000000000 x6 : 0000000000000001 [ 1.176659] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.176666] x3 : ffffffffffffffff x2 : ffffff8009e941b8 [ 1.176672] x1 : ffffffc0fa6f0000 x0 : 000000000000003e [ 1.176687] ---[ end trace cd8d021a71fdc8a6 ]--- [ 1.176691] Call trace: [ 1.176699] [] sysfs_warn_dup+0x68/0x88 [ 1.176706] [] sysfs_create_dir_ns+0x9c/0xb0 [ 1.176719] [] kobject_add_internal+0x98/0x348 [ 1.176725] [] kobject_add+0x88/0xf0 [ 1.176730] [] kobject_create_and_add+0x38/0x80 [ 1.176746] [] rtl8168_init_one+0x1194/0x1248 [ 1.176750] [] rtl8168_probe+0x7c/0x118 [ 1.176760] [] pci_device_probe+0xa4/0x140 [ 1.176772] [] driver_probe_device+0xd8/0x408 [ 1.176776] [] __driver_attach+0xdc/0x128 [ 1.176781] [] bus_for_each_dev+0x5c/0xa8 [ 1.176786] [] driver_attach+0x30/0x40 [ 1.176791] [] bus_add_driver+0x20c/0x2a8 [ 1.176798] [] driver_register+0x6c/0x110 [ 1.176808] [] __pci_register_driver+0x50/0x60 [ 1.176823] [] rtl8168_init_module+0x4c/0x58 [ 1.176831] [] do_one_initcall+0x44/0x130 [ 1.176843] [] kernel_init_freeable+0x1a0/0x244 [ 1.176857] [] kernel_init+0x18/0x108 [ 1.176863] [] ret_from_fork+0x10/0x30 [ 1.176870] kobject_add_internal failed for rt8168_power with -EEXIST, don't try to register things with the same name in the same directory. [ 1.185052] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.185057] Extcon AUX1(HDMI) enable [ 1.186065] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.186136] tegradc tegradc.1: No lt-data, using default setting [ 1.186163] tegradc tegradc.1: No hpd-gpio in DT [ 1.186197] tegradc tegradc.1: DT parsed successfully [ 1.186250] tegradc tegradc.1: Display dc.ffffff800ad00000 registered with id=1 [ 1.187740] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.192011] tegradc tegradc.1: probed [ 1.195035] kobject_create_and_add: kobject_add error: -17 [ 1.195040] unable to create rt8168_power_saver kernel object! [ 1.195059] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.195960] PPP generic driver version 2.4.2 [ 1.196162] PPP BSD Compression module registered [ 1.196167] PPP Deflate Compression module registered [ 1.196203] PPP MPPE Compression module registered [ 1.196209] NET: Registered protocol family 24 [ 1.196283] usbcore: registered new interface driver r8152 [ 1.196334] usbcore: registered new interface driver asix [ 1.196414] usbcore: registered new interface driver ax88179_178a [ 1.196451] usbcore: registered new interface driver cdc_ether [ 1.196495] usbcore: registered new interface driver net1080 [ 1.196537] usbcore: registered new interface driver cdc_subset [ 1.196581] usbcore: registered new interface driver zaurus [ 1.196641] usbcore: registered new interface driver cdc_ncm [ 1.196828] VFIO - User Level meta-driver version: 0.3 [ 1.198145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.198169] ehci-pci: EHCI PCI platform driver [ 1.198217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.198228] ohci-pci: OHCI PCI platform driver [ 1.198271] ohci-platform: OHCI generic platform driver [ 1.200952] tegradc tegradc.1: fb registered [ 1.200969] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.201589] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.202765] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f96f2000 id [ 1.204179] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.204189] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.204199] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.204216] tegradc tegradc.1: blank - powerdown [ 1.204238] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.204242] Extcon DP: HPD disabled [ 1.204246] hpd: hpd_switch 0 [ 1.204251] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.204260] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.204268] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.205100] usbcore: registered new interface driver uas [ 1.205176] usbcore: registered new interface driver usb-storage [ 1.205313] usbcore: registered new interface driver usbserial [ 1.205615] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.205675] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.205704] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.206468] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.206527] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.206777] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.206785] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.206790] usb usb1: Product: xHCI Host Controller [ 1.206796] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.206800] usb usb1: SerialNumber: 70090000.xusb [ 1.207562] hub 1-0:1.0: USB hub found [ 1.207613] hub 1-0:1.0: 5 ports detected [ 1.208282] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.208296] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.208415] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.208511] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.208517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.208522] usb usb2: Product: xHCI Host Controller [ 1.208528] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.208533] usb usb2: SerialNumber: 70090000.xusb [ 1.209046] hub 2-0:1.0: USB hub found [ 1.209081] hub 2-0:1.0: 4 ports detected [ 1.210004] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.210012] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.210547] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.212169] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.212182] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.212200] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.212212] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.212234] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.212935] mousedev: PS/2 mouse device common for all mice [ 1.213045] usbcore: registered new interface driver xpad [ 1.310799] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.311099] usb usb2: usb_suspend_both: status 0 [ 1.318300] tegradc tegradc.0: blank - powerdown [ 1.344114] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.346582] rtc rtc1: alarm rtc device [ 1.346602] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.346634] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.347351] i2c /dev entries driver [ 1.349591] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.350081] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.350087] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.350999] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.368064] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.368068] Extcon AUX1(HDMI) disable [ 1.374278] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.374347] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.374414] imx219 7-0010: board setup failed [ 1.374466] imx219: probe of 7-0010 failed with error -121 [ 1.374875] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.398274] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.398377] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.398585] imx219 8-0010: board setup failed [ 1.398766] imx219: probe of 8-0010 failed with error -121 [ 1.401034] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.404699] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.404705] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.405242] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.405260] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.405269] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.405420] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.405431] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.405437] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.405592] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.405602] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.405608] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.405830] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.406826] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.406886] tegra_aotag tegra-aotag: Invalid temp readout [ 1.406911] tegra_aotag tegra-aotag: Invalid temp readout [ 1.406928] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.406937] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.408009] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.408029] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.408276] tegra_aotag tegra-aotag: Invalid temp readout [ 1.408307] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.408870] parse_throttle_dt_data: Num cap clks = 6 [ 1.408875] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.408889] parse_throttle_dt_data: clk=gpu type=4 [ 1.408923] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.408943] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.408964] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.408968] parse_throttle_dt_data: clk=emc type=3 [ 1.409503] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.409696] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.409926] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.411106] FAN dev name: pwm-fan [ 1.411206] FAN:gpio request success. [ 1.411287] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.411633] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.411837] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.411846] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.411966] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.411971] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.411975] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.411980] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.411984] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.411988] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.411992] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.411995] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.412000] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.412004] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.414978] device-mapper: uevent: version 1.0.3 [ 1.415552] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.420332] tegradc tegradc.0: unblank [ 1.421040] tegra210-cpufreq cpufreq: probe()...completed [ 1.421984] sdhci: Secure Digital Host Controller Interface driver [ 1.421985] sdhci: Copyright(c) Pierre Ossman [ 1.421987] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.422386] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.429433] tegra-se 70012000.se: tegra_se_probe: complete [ 1.429994] hidraw: raw HID events driver (C) Jiri Kosina [ 1.431245] usbcore: registered new interface driver usbhid [ 1.431247] usbhid: USB HID core driver [ 1.433305] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.433474] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.435334] nvpmodel: initialized successfully [ 1.436286] usbcore: registered new interface driver snd-usb-audio [ 1.436345] No Device Node present for smmu client: snd-soc-dummy !! [ 1.436349] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.436366] iommu: Adding device snd-soc-dummy to group 35 [ 1.459273] OPE platform probe [ 1.459364] OPE platform probe successful [ 1.459653] OPE platform probe [ 1.459735] OPE platform probe successful [ 1.460080] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.460135] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 1.460942] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.461206] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.466666] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.488011] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.488134] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.488252] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.488376] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.488495] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.488620] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.488741] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.488856] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.488975] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.489091] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.495945] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.495948] Extcon AUX1(HDMI) enable [ 1.503847] u32 classifier [ 1.503848] Actions configured [ 1.503919] Initializing XFRM netlink socket [ 1.504630] NET: Registered protocol family 10 [ 1.505389] NET: Registered protocol family 17 [ 1.505400] NET: Registered protocol family 15 [ 1.505474] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.505516] Bluetooth: RFCOMM socket layer initialized [ 1.505532] Bluetooth: RFCOMM ver 1.11 [ 1.505537] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.505541] Bluetooth: HIDP socket layer initialized [ 1.505560] 9pnet: Installing 9P2000 support [ 1.505597] Key type dns_resolver registered [ 1.505992] Registered cp15_barrier emulation handler [ 1.505998] Registered setend emulation handler [ 1.508248] registered taskstats version 1 [ 1.508867] Adding domain ve2-pd to PM domain host1x-pd [ 1.509102] Adding domain ve-pd to PM domain host1x-pd [ 1.511122] isp 54600000.isp: initialized [ 1.511442] tegradc tegradc.0: sync windows ret = 246 [ 1.512605] isp 54680000.isp: initialized [ 1.517873] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.518222] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.518344] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.522527] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.522957] last reset is due to software reset [ 1.522960] KERNEL: PMC reset status reg: 0x3 [ 1.523022] BL: PMC reset status reg: 0x3 [ 1.523024] BL: PMIC poweroff Event Recorder: 0x0 [ 1.524521] clk_cbus_recalc_rate: no gbus parent [ 1.524525] clk_cbus_round_rate: no gbus parent [ 1.524526] clk_cbus_round_rate: no gbus parent [ 1.524533] clk_cbus_recalc_rate: no gbus parent [ 1.524633] clk_cbus_recalc_rate: no gbus parent [ 1.524635] clk_cbus_round_rate: no gbus parent [ 1.524637] clk_cbus_round_rate: no gbus parent [ 1.524640] clk_cbus_recalc_rate: no gbus parent [ 1.525315] tegra_dvfs: GPU-cap: registered [ 1.525375] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.525377] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.525379] tegra dvfs: vdd-gpu: nominal 1048mV, offset 708000uV, step 10000uV, scaling enabled [ 1.526723] tegra_dvfs: vdd-gpu-vts: registered [ 1.526769] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.527435] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.528044] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.529140] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.529704] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.534669] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.555900] usb 1-2: New USB device found, idVendor=0424, idProduct=2807 [ 1.555903] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.555906] usb 1-2: Product: USB2807 Hub [ 1.555908] usb 1-2: Manufacturer: Microchip [ 1.556682] hub 1-2:1.0: USB hub found [ 1.556746] hub 1-2:1.0: 7 ports detected [ 1.560242] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.560245] Extcon HDMI: HPD enabled [ 1.560259] tegradc tegradc.0: hdmi: plugged [ 1.563280] tegra_rtc 7000e000.rtc: setting system clock to 2021-07-26 06:08:26 UTC (1627279706) [ 1.564332] vi 54080000.vi: vi_probe: ++ [ 1.566974] vi 54080000.vi: initialized [ 1.568919] vi 54080000.vi: subdev nvcsi--2 bound [ 1.569020] vi 54080000.vi: subdev nvcsi--1 bound [ 1.569231] mmcblk mmc0:0001: Card claimed for testing. [ 1.570568] Disable partitions left on by BL [ 1.570572] disb [ 1.570617] bwmgr: missing cdev-type property [ 1.570738] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.570744] DRAM derating cdev registered. [ 1.571589] ALSA device list: [ 1.571592] #0: tegra-hda at 0x70038000 irq 82 [ 1.571595] #1: tegra-snd-t210ref-mobile-rt565x [ 1.574702] Freeing unused kernel memory: 8576K [ 1.598621] Root device found: mmcblk0p1 [ 1.600101] Found dev node: /dev/mmcblk0p1 [ 1.675029] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.695382] usb 2-1: New USB device found, idVendor=0424, idProduct=5807 [ 1.695387] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.695399] usb 2-1: Product: USB5807 Hub [ 1.695402] usb 2-1: Manufacturer: Microchip [ 1.696223] hub 2-1:1.0: USB hub found [ 1.696288] hub 2-1:1.0: 7 ports detected [ 1.895194] EXT4-fs (mmcblk0p1): 28 orphan inodes deleted [ 1.895197] EXT4-fs (mmcblk0p1): recovery complete [ 1.919471] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.921373] Rootfs mounted over mmcblk0p1 [ 1.934526] Switching from initrd to actual rootfs [ 2.031356] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.042496] cgroup: cgroup2: unknown option "nsdelegate" [ 2.058383] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.059161] systemd[1]: Detected architecture arm64. [ 2.082725] systemd[1]: Set hostname to . [ 2.100461] tegra_cec 70015000.tegra_cec: physical address: 14:00. [ 2.159319] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.159329] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.164997] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.165001] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.254819] random: systemd: uninitialized urandom read (16 bytes read) [ 2.254849] systemd[1]: Reached target Swap. [ 2.255052] random: systemd: uninitialized urandom read (16 bytes read) [ 2.256752] systemd[1]: Created slice User and Session Slice. [ 2.256803] random: systemd: uninitialized urandom read (16 bytes read) [ 2.257577] systemd[1]: Created slice System Slice. [ 2.257871] systemd[1]: Listening on Journal Socket. [ 2.258030] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.278672] usb 2-1: usb_suspend_both: status 0 [ 2.278847] usb usb2: usb_suspend_both: status 0 [ 2.282695] usb 1-2.5: new high-speed USB device number 3 using tegra-xusb [ 2.297199] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.303232] usb 1-2.5: New USB device found, idVendor=1a40, idProduct=0101 [ 2.303238] usb 1-2.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.303242] usb 1-2.5: Product: USB 2.0 Hub [ 2.304342] hub 1-2.5:1.0: USB hub found [ 2.304424] hub 1-2.5:1.0: 4 ports detected [ 2.429406] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.432910] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.432931] cpu-throttle-alert cooling device registered. [ 2.433082] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.433097] gpu-throttle-alert cooling device registered. [ 2.433281] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.433294] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.433307] hot-surface-alert cooling device registered. [ 2.562981] systemd-journald[2032]: Received request to flush runtime journal from PID 1 [ 2.610693] usb 1-2.5.1: new full-speed USB device number 4 using tegra-xusb [ 2.632867] usb 1-2.5.1: New USB device found, idVendor=1a86, idProduct=e050 [ 2.632873] usb 1-2.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.632878] usb 1-2.5.1: Product: USB Keyboard-Mouse_V1.7 [ 2.632881] usb 1-2.5.1: Manufacturer: USB Keyboard-Mouse [ 2.635389] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.1/1-2.5.1:1.0/0003:1A86:E050.0001/input/input2 [ 2.695118] hid-generic 0003:1A86:E050.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on usb-70090000.xusb-2.5.1/input0 [ 2.697045] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.1/1-2.5.1:1.1/0003:1A86:E050.0002/input/input3 [ 2.754968] hid-generic 0003:1A86:E050.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on usb-70090000.xusb-2.5.1/input1 [ 2.756996] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.1/1-2.5.1:1.2/0003:1A86:E050.0003/input/input4 [ 2.757460] hid-generic 0003:1A86:E050.0003: input,hidraw2: USB HID v1.10 Mouse [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on usb-70090000.xusb-2.5.1/input2 [ 2.759685] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.1/1-2.5.1:1.3/0003:1A86:E050.0004/input/input5 [ 2.819057] hid-generic 0003:1A86:E050.0004: input,hidraw3: USB HID v1.10 Device [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on usb-70090000.xusb-2.5.1/input3 [ 2.898684] usb 1-2.5.2: new high-speed USB device number 5 using tegra-xusb [ 2.919119] usb 1-2.5.2: New USB device found, idVendor=1a40, idProduct=0101 [ 2.919126] usb 1-2.5.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.919130] usb 1-2.5.2: Product: USB 2.0 Hub [ 2.920060] hub 1-2.5.2:1.0: USB hub found [ 2.920140] hub 1-2.5.2:1.0: 4 ports detected [ 3.226703] usb 1-2.5.2.1: new low-speed USB device number 6 using tegra-xusb [ 3.250999] usb 1-2.5.2.1: New USB device found, idVendor=04ca, idProduct=0061 [ 3.251006] usb 1-2.5.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.251010] usb 1-2.5.2.1: Product: USB Optical Mouse [ 3.251013] usb 1-2.5.2.1: Manufacturer: PixArt [ 3.253938] input: PixArt USB Optical Mouse as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.2/1-2.5.2.1/1-2.5.2.1:1.0/0003:04CA:0061.0005/input/input6 [ 3.254390] hid-generic 0003:04CA:0061.0005: input,hidraw4: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-70090000.xusb-2.5.2.1/input0 [ 3.349850] using random self ethernet address [ 3.354679] usb 1-2.5.2.2: new low-speed USB device number 7 using tegra-xusb [ 3.381617] usb 1-2.5.2.2: New USB device found, idVendor=413c, idProduct=2113 [ 3.381622] usb 1-2.5.2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.381625] usb 1-2.5.2.2: Product: Dell KB216 Wired Keyboard [ 3.381802] using random host ethernet address [ 3.390324] input: Dell KB216 Wired Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.2/1-2.5.2.2/1-2.5.2.2:1.0/0003:413C:2113.0006/input/input7 [ 3.447422] hid-generic 0003:413C:2113.0006: input,hidraw5: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-70090000.xusb-2.5.2.2/input0 [ 3.452751] input: Dell KB216 Wired Keyboard as /devices/70090000.xusb/usb1/1-2/1-2.5/1-2.5.2/1-2.5.2.2/1-2.5.2.2:1.1/0003:413C:2113.0007/input/input8 [ 3.511006] hid-generic 0003:413C:2113.0007: input,hidraw6: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-70090000.xusb-2.5.2.2/input1 [ 3.636408] random: crng init done [ 3.639848] random: 7 urandom warning(s) missed due to ratelimiting [ 3.904352] Mass Storage Function, version: 2009/09/11 [ 3.904359] LUN: removable file: (no medium) [ 3.934317] using random self ethernet address [ 3.945143] using random host ethernet address [ 4.015869] rndis0: HOST MAC 7e:96:9e:ad:5c:40 [ 4.016601] rndis0: MAC 7e:96:9e:ad:5c:41 [ 4.020031] usb0: HOST MAC 7e:96:9e:ad:5c:42 [ 4.020231] usb0: MAC 7e:96:9e:ad:5c:43 [ 4.020263] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.025554] l4tbr0: port 1(rndis0) entered blocking state [ 4.025559] l4tbr0: port 1(rndis0) entered disabled state [ 4.026133] device rndis0 entered promiscuous mode [ 4.035627] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 4.044887] l4tbr0: port 2(usb0) entered blocking state [ 4.044892] l4tbr0: port 2(usb0) entered disabled state [ 4.047526] device usb0 entered promiscuous mode [ 4.056950] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.279299] android_work: did not send uevent (0 0 (null)) [ 4.352319] android_work: sent uevent USB_STATE=CONNECTED [ 4.407396] android_work: sent uevent USB_STATE=DISCONNECTED [ 4.419810] zram: Added device: zram0 [ 4.423466] zram: Added device: zram1 [ 4.427497] zram: Added device: zram2 [ 4.428801] zram: Added device: zram3 [ 4.445401] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.446590] eth0: 0xffffff800a38e000, 00:04:4b:ea:62:7f, IRQ 405 [ 4.473657] zram0: detected capacity change from 0 to 519581696 [ 4.500269] android_work: sent uevent USB_STATE=CONNECTED [ 4.502301] configfs-gadget gadget: high-speed config #1: c [ 4.502330] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 4.502346] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 4.502362] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 4.502454] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled [ 4.502470] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled [ 4.502485] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled [ 4.502519] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled [ 4.502537] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled [ 4.502559] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled [ 4.502691] android_work: sent uevent USB_STATE=CONFIGURED [ 4.509389] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.509406] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.509899] tegra-xudc-new 700d0000.xudc: ep 13 disabled [ 4.509986] tegra-xudc-new 700d0000.xudc: ep 8 disabled [ 4.516847] Adding 507400k swap on /dev/zram0. Priority:5 extents:1 across:507400k SS [ 4.528310] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.528328] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.529139] zram1: detected capacity change from 0 to 519581696 [ 4.554760] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.554793] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 4.554912] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 4.557395] Adding 507400k swap on /dev/zram1. Priority:5 extents:1 across:507400k SS [ 4.566378] zram2: detected capacity change from 0 to 519581696 [ 4.598184] Adding 507400k swap on /dev/zram2. Priority:5 extents:1 across:507400k SS [ 4.602258] zram3: detected capacity change from 0 to 519581696 [ 4.623514] Adding 507400k swap on /dev/zram3. Priority:5 extents:1 across:507400k SS [ 4.632652] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.633738] eth1: 0xffffff800a3ec000, 00:04:4b:ea:62:7f, IRQ 406 [ 4.752445] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.503883] tegradc tegradc.0: unblank [ 5.503894] tegradc tegradc.1: blank - powerdown [ 6.201958] fuse init (API version 7.26) [ 6.578680] r8168: eth0: link up [ 6.579103] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.490574] l4tbr0: port 2(usb0) entered blocking state [ 9.490579] l4tbr0: port 2(usb0) entered forwarding state [ 9.490630] l4tbr0: port 1(rndis0) entered blocking state [ 9.490668] l4tbr0: port 1(rndis0) entered forwarding state [ 9.491444] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 9.491462] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 14.829429] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.829440] Bluetooth: BNEP socket layer initialized [ 22.550332] tegradc tegradc.0: blank - powerdown [ 22.611871] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 22.611879] Extcon AUX1(HDMI) disable [ 22.631877] tegradc tegradc.1: blank - powerdown [ 22.779390] tegradc tegradc.0: blank - powerdown [ 22.779401] tegradc tegradc.0: unblank [ 22.815183] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 22.815278] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 22.816304] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 22.851994] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 22.852003] Extcon AUX1(HDMI) enable [ 22.858802] tegradc tegradc.0: unblank [ 22.859075] tegradc tegradc.1: blank - powerdown [ 26.354195] tegradc tegradc.0: unblank [ 26.354204] tegradc tegradc.1: blank - powerdown [ 31.858844] vdd-fan: disabling [ 31.858848] vdd-usb-vbus: disabling [ 31.858851] vdd-usb-vbus2: disabling [ 31.858861] vddio-sdmmc-ap: disabling [ 31.858932] vddio-sdmmc3-ap: disabling [ 31.858992] vdd-3v3-sd: disabling [ 31.858998] avdd-io-edp-1v05: disabling [ 31.859000] vdd-usb-hub-en: disabling