y ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.093] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39) [0000.098] I> Boot-mode: Coldboot [0000.101] I> Chip revision : A02P [0000.104] I> Bootrom patch version : 15 (correctly patched) [0000.110] I> ATE fuse revision : 0x200 [0000.113] I> Ram repair fuse : 0x0 [0000.116] I> Ram Code : 0x2 [0000.119] I> rst_source : 0x0 [0000.121] I> rst_level : 0x0 [0000.125] I> Boot-device: eMMC [0000.140] I> sdmmc DDR50 mode [0000.144] W> No valid slot number is found in scratch register [0000.149] W> Return default slot: _a [0000.153] I> Active Boot chain : 0 [0000.156] I> Boot-device: eMMC [0000.159] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.167] I> Temperature = 31500 [0000.170] W> Skipping boost for clk: BPMP_CPU_NIC [0000.175] W> Skipping boost for clk: BPMP_APB [0000.179] W> Skipping boost for clk: AXI_CBB [0000.183] W> Skipping boost for clk: AON_CPU_NIC [0000.187] W> Skipping boost for clk: CAN1 [0000.191] W> Skipping boost for clk: CAN2 [0000.195] I> Boot-device: eMMC [0000.198] I> Boot-device: eMMC [0000.207] I> Sdmmc: HS400 mode enabled [0000.212] I> ECC region[0]: Start:0x0, End:0x0 [0000.216] I> ECC region[1]: Start:0x0, End:0x0 [0000.220] I> ECC region[2]: Start:0x0, End:0x0 [0000.224] I> ECC region[3]: Start:0x0, End:0x0 [0000.228] I> ECC region[4]: Start:0x0, End:0x0 [0000.232] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.238] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.242] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.247] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.251] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.257] E> FAILED: Thermal config [0000.264] E> FAILED: MEMIO rail config [0000.282] I> Boot-device: eMMC [0000.292] I> sdmmc bdev is already initialized [0000.365] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.373] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-feba5943) [0000.374] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.374] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.375] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.381] W> device prod register failed [0000.384] I> Boot-device: eMMC [0000.387] I> Boot_device: SDMMC_BOOT instance: 3 [0000.393] I> sdmmc-3 params source = boot args [0000.396] I> sdmmc bdev is already initialized [0000.400] I> sdmmc-3 params source = boot args [0000.409] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.415] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.416] W> No valid slot number is found in scratch register [0000.421] W> Return default slot: _a [0000.425] I> Active Boot chain : 0 [0000.428] I> parsing oem signed section of bpmp-fw header done [0000.434] I> bpmp-fw binary init read from storage [0000.439] I> oem authentication of bpmp-fw header done [0000.445] I> bpmp-fw binary done read from storage [0000.448] I> bpmp-fw: Authentication init Done [0000.452] I> parsing oem signed section of cpubl header done [0000.458] I> cpubl binary init read from storage [0000.462] I> bpmp-fw: Authentication Finalize Done [0000.467] I> oem authentication of cpubl header done [0000.472] I> cpubl binary done read from storage [0000.476] I> cpubl: Authentication init Done [0000.481] I> parsing oem signed section of rce header done [0000.486] I> rce binary init read from storage [0000.490] I> Relocating BR-BCT [0000.493] I> cpubl: Authentication Finalize Done [0000.497] I> oem authentication of rce header done [0000.502] I> rce binary done read from storage [0000.506] I> rce: Authentication init Done [0000.511] I> parsing oem signed section of ape header done [0000.515] I> ape binary init read from storage [0000.520] I> rce: Authentication Finalize Done [0000.524] I> oem authentication of ape header done [0000.528] I> ape binary done read from storage [0000.533] I> ape: Authentication init Done [0000.538] I> parsing oem signed section of tos header done [0000.542] I> tos binary init read from storage [0000.546] I> ape: Authentication Finalize Done [0000.551] I> oem authentication of tos header done [0000.555] I> tos binary done read from storage [0000.560] I> tos: Authentication init Done [0000.564] I> parsing oem signed section of bpmp-fw-dtb header done [0000.570] I> bpmp-fw-dtb binary init read from storage [0000.575] I> tos: Authentication Finalize Done [0000.581] I> oem authentication of bpmp-fw-dtb header done [0000.587] I> bpmp-fw-dtb binary done read from storage [0000.589] I> bpmp-fw-dtb: Authentication init Done [0000.594] I> parsing oem signed section of cpubl-dtb header done [0000.600] I> cpubl-dtb binary init read from storage [0000.604] I> bpmp-fw-dtb: Authentication Finalize Done [0000.642] I> oem authentication of cpubl-dtb header done [0000.642] I> cpubl-dtb binary done read from storage [0000.643] I> cpubl-dtb: Authentication init Done [0000.645] I> parsing oem signed section of eks header done [0000.646] I> eks binary init read from storage [0000.646] I> cpubl-dtb: Authentication Finalize Done [0000.647] I> oem authentication of eks header done [0000.650] I> eks binary done read from storage [0000.655] I> eks: Authentication init Done [0000.659] I> eks: Authentication Finalize Done [0000.663] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 08:38:54, Feb 19 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 197: key_mgnt_processing ....... hwkey-agent: 189: Setting EKB key 0 to slot 14 hwkey-agent: 167: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized ÿá ÿâmrq initialized ÿá[0001.164] I> Welcome to Cboot ÿâfmon_post initialized ÿá[0001.164] I> Cboot Version: t194-9efcbc4f [0001.164] I> CPU-BL Params @ 0xf2820000 [0001.165] I> 0) Base:0x00000000 Size:0x00000000 [0001.169] I> 1) Base:0xf1100000 Size:0x00100000 [0001.173] I> 2) Base:0xf2000000 Size:0x00200000 [0001.178] I> 3) Base:0xf1200000 Size:0x00200000 [0001.182] I> 4) Base:0xf1000000 Size:0x00100000 ÿâclk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ÿá[0001.186] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.266] I> 6) Base:0xf3800000 Size:0x00400000 [0001.270] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.275] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.279] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.284] I> 10) Base:0xf3000000 Size:0x00800000 [0001.288] I> 11) Base:0x40000000 Size:0x00040000 [0001.293] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.297] I> 13) Base:0x40046000 Size:0x00002000 [0001.302] I> 14) Base:0x40048000 Size:0x00002000ÿâemc_debugfs initialized dvs_debugfs initialized ÿá [0001.311] I> 15) Base:0xac000000 Size:0x00004000ÿâfmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá [0001.361] I> 16) Base:0x4004a000 Size:0x00002000 [0001.366] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.370] I> 18) Base:0x4004c000 Size:0x00002000 [0001.375] I> 19) Base:0xf2200000 Size:0x00600000 [0001.379] I> 20) Base:0x4004e000 Size:0x00002000 [0001.384] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.388] I> 22) Base:0x00000000 Size:0x00000000 [0001.392] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.397] I> 24) Base:0xf6000000 Size:0x02000000 [0001.401] I> 25) Base:0x40050000 Size:0x00002000 [0001.406] I> 26) Base:0x40040000 Size:0x00006000 [0001.410] I> 27) Base:0xf1800000 Size:0x00400000 [0001.415] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.419] I> 29) Base:0xf1400000 Size:0x00400000 [0001.424] I> 30) Base:0x00000000 Size:0x00000000 [0001.428] I> 31) Base:0x00000000 Size:0x00000000 [0001.433] I> 32) Base:0xf8000000 Size:0x08000000 [0001.437] I> 33) Base:0x00000000 Size:0x00000000 [0001.442] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.446] I> 35) Base:0xab000000 Size:0x01000000 [0001.451] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.455] I> 37) Base:0xf2800000 Size:0x00800000 [0001.459] I> 38) Base:0x80000000 Size:0x20000000 [0001.464] I> 39) Base:0xb0000000 Size:0x08000000 [0001.468] I> 40) Base:0x00000000 Size:0x00000000 [0001.473] I> 41) Base:0x00000000 Size:0x00000000 [0001.477] I> 42) Base:0x00000000 Size:0x00000000 [0001.482] I> 43) Base:0x00000000 Size:0x00000000 [0001.486] I> 44) Base:0x00000000 Size:0x00000000 [0001.491] I> 45) Base:0x00000000 Size:0x00000000 [0001.495] GIC-SPI Target CPU: 0 [0001.498] Interrupts Init done [0001.501] calling constructors [0001.504] initializing heap [0001.507] I> Heap: [0xa06945e8 ... 0xab000000] [0001.511] initializing threads [0001.514] initializing timers [0001.516] creating bootstrap completion thread [0001.521] top of bootstrap2() [0001.524] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.528] initializing platform [0001.531] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.537] W> device prod register failed [0001.540] I> Bl_dtb @0xaaf00000 [0001.548] W> "plugin-manager" doesn't exist, creating [0001.548] W> "ids" doesn't exist, creating [0001.553] W> "connection" doesn't exist, creating [0001.557] W> "configs" doesn't exist, creating [0001.567] I> Find /i2c@3160000's alias i2c0 [0001.567] I> Reading eeprom i2c=0 address=0x50 [0001.595] I> Device at /i2c@3160000:0x50 [0001.595] I> Reading eeprom i2c=0 address=0x56 [0001.619] I> Device at /i2c@3160000:0x56 [0001.621] I> Find /i2c@3180000's alias i2c2 [0001.621] I> Reading eeprom i2c=2 address=0x54 [0001.623] E> I2C: slave not found in slaves. [0001.623] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.624] E> I2C_DEV: Failed to send register address 0x00000000. [0001.625] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.633] E> eeprom: Failed to read I2C slave device [0001.638] I> Eeprom read failed 0x3526070d [0001.642] I> Reading eeprom i2c=2 address=0x57 [0001.647] E> I2C: slave not found in slaves. [0001.651] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.658] E> I2C_DEV: Failed to send register address 0x00000000. [0001.664] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.673] E> eeprom: Failed to read I2C slave device [0001.678] I> Eeprom read failed 0x3526070d [0001.682] I> Reading eeprom i2c=2 address=0x52 [0001.687] E> I2C: slave not found in slaves. [0001.691] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.699] E> I2C_DEV: Failed to send register address 0x00000000. [0001.704] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.714] E> eeprom: Failed to read I2C slave device [0001.718] I> Eeprom read failed 0x3526070d [0001.723] I> Find /i2c@c240000's alias i2c1 [0001.726] I> Reading eeprom i2c=1 address=0x52 [0001.732] E> I2C: slave not found in slaves. [0001.735] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.743] E> I2C_DEV: Failed to send register address 0x00000000. [0001.748] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.758] E> eeprom: Retry to read I2C slave device. [0001.763] E> I2C: slave not found in slaves. [0001.767] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.774] E> I2C_DEV: Failed to send register address 0x00000000. [0001.780] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.789] E> eeprom: Failed to read I2C slave device [0001.794] I> Eeprom read failed 0x3526070d [0001.798] I> Reading eeprom i2c=1 address=0x50 [0001.803] E> I2C: slave not found in slaves. [0001.807] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.815] E> I2C_DEV: Failed to send register address 0x00000000. [0001.820] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.830] E> eeprom: Retry to read I2C slave device. [0001.835] E> I2C: slave not found in slaves. [0001.838] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.846] E> I2C_DEV: Failed to send register address 0x00000000. [0001.852] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.861] E> eeprom: Failed to read I2C slave device [0001.866] I> Eeprom read failed 0x3526070d [0001.870] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0001.875] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.886] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0001.892] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.903] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.910] W> "i2c@3160000" doesn't exist, creating [0001.914] W> "module@0x50" doesn't exist, creating [0001.919] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.926] W> "module@0x56" doesn't exist, creating [0001.933] I> Adding plugin-manager/cvm [0001.934] W> "chip-id" doesn't exist, creating [0001.938] I> Adding plugin-manager/chip-id/A02P [0001.943] I> Plugin-manager override starting [0001.948] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.958] I> node /plugin-manager/fragement-soft-wdt matches [0001.966] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.971] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.985] I> Disable plugin-manager status in FDT [0001.985] I> Plugin-manager override finished successfully [0001.985] I> gpio framework initialized [0001.988] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.993] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.999] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.007] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.014] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.020] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.026] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.034] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.042] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.048] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.056] I> fixed regulator driver initialized [0002.070] I> register 'maxim' power off handle [0002.071] I> virtual i2c enabled [0002.071] I> registered 'maxim,max20024' pmic [0002.072] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.077] I> Boot-device: eMMC [0002.080] I> Boot_device: SDMMC_BOOT instance: 3 [0002.089] I> sdmmc-3 params source = boot args [0002.089] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.094] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.105] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0002.110] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.121] I> sdmmc bdev is already initialized [0002.125] I> sdmmc-3 params source = boot args [0002.156] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.169] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.179] I> enabling 'vdd-hdmi-5v0' regulator [0002.184] I> regulator 'vdd-hdmi-5v0' already enabled [0002.184] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.185] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.189] E> invalid display type [0002.194] E> invalid display type [0002.195] E> cannot find any other nvdisp nodes [0002.195] E> no valid display unit config found in dtb [0002.197] W> display init failed [0002.197] I> Load in CBoot Boot Options partition and parse it [0002.207] E> Error -9 when finding node with path /boot-configuration [0002.207] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.214] I> Using default boot order [0002.218] I> boot-dev-order :- [0002.221] I> 1.sd [0002.223] I> 2.usb [0002.224] I> 3.nvme [0002.226] I> 4.emmc [0002.228] I> 5.net [0002.230] I> Hit any key to stop autoboot: 4 3 2 1 [0004.238] initializing target [0004.238] calling apps_init() [0004.239] starting app kernel_boot_app [0004.258] I> found decompressor handler: lz4-legacy [0004.259] I> decompressing BMP blob ... [0004.270] I> Kernel type = Normal [0004.270] I> Loading kernel-bootctrl from partition [0004.270] I> Loading partition kernel-bootctrl at 0xa42d0000 from device(0x1) [0004.277] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.278] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.278] I> ########## SD (0) boot ########## [0004.279] I> No sdcard [0004.280] I> -0 params source = [0004.283] E> Blockdev open: exit error [0004.287] E> SD boot failed, err: 724238353 [0004.291] I> ########## USB (0) boot ########## [0004.300] W> No valid slot number is found in scratch register [0004.301] W> Return default slot: _a [0004.317] I> USB Firmware Version: 60.06 release [0004.372] I> regulator of usb2-0 already enabled [0004.379] I> regulator of usb2-1 already enabled [0004.385] I> regulator of usb2-2 already enabled [0004.394] I> enabling 'vdd-5v-sata' regulator [0005.399] E> failed to initialize xhci controller [0005.399] E> Error in init of XUSB host driver, err: 79790026 [0005.400] W> Failed to initialize device 5-0 [0005.400] E> USB boot failed, err: 2037973030 [0005.400] I> ########## Fixed storage boot ########## [0005.407] I> Already published: 00010003 [0005.407] I> Look for boot partition [0005.407] I> Fallback: assuming 0th partition is boot partition [0005.410] I> Detect filesystem [0005.437] I> Loading extlinux.conf ... [0005.438] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.474] I> L4T boot options [0005.475] I> [1]: "primary kernel" [0005.475] I> [2]: "custom config" [0005.475] I> Enter choice: [0008.476] I> Continuing with default option: 2 [0008.476] I> Loading kernel sig file from rootfs ... [0008.476] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.501] I> Loading kernel binary from rootfs ... [0008.501] I> rootfs path: /sdmmc_user/boot/Image [0008.724] I> overload load_size to 34338824 (from 34338832) [0008.741] I> Validate kernel ... [0008.742] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0009.055] I> Encryption fuse is not ON [0009.064] I> Loading kernel-dtb sig file from rootfs ... [0009.065] I> rootfs path: /sdmmc_user/boot/custom.dtb.sig [0015.296] I> lookup_linear_dir:447: Invalid file block num [0015.296] I> ext2_walk:142: 'custom.dtb.sig' lookup failed [0015.296] I> ext4_open_file:666: '/boot/custom.dtb.sig' lookup failed [0015.297] E> file /sdmmc_user/boot/custom.dtb.sig open failed!! [0015.297] W> Failed to load kernel-dtb sig file (err=202113041) [0015.299] I> Loading kernel-dtb binary from rootfs ... [0015.304] I> rootfs path: /sdmmc_user/boot/custom.dtb [0015.333] I> Validate kernel-dtb ... [0015.333] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0015.334] E> Stage2Signature validation failed with SHA2!! [0015.334] C> OEM authentication of kernel-dtb header failed! [0015.335] W> Failed to validate kernel-dtb binary (err=1077936152, fail=1) [0015.336] W> Security fuse not burned, ignore validation failure [0015.342] I> Loading ramdisk from rootfs ... [0015.346] I> Loading initrd sig file from rootfs ... [0015.351] I> rootfs path: /sdmmc_user/boot/initrd.sig [0015.380] I> Loading initrd binary from rootfs ... [0015.381] I> rootfs path: /sdmmc_user/boot/initrd [0015.439] I> overload load_size to 7236840 (from 7236848) [0015.441] I> Validate initrd ... [0015.441] I> T19x: Authenticate initrd (bin_type: 49), max size 0x4000000 [0015.508] I> Encryption fuse is not ON [0015.516] I> Kernel hdr @0xa42d0000 [0015.516] I> Kernel dtb @0x90000000 [0015.516] I> decompressor handler not found [0015.516] I> Copying kernel image (34338824 bytes) from 0xa42d0000 to 0x80080000 ... [0015.522] I> Done [0015.523] I> Updated bpmp info to DTB [0015.524] I> Ramdisk: Base: 0x91000000; Size: 0x6e6ce8 [0015.525] I> Updated initrd info to DTB [0015.525] W> WARN: Fail to override "console=none" in commandline [0015.529] I> Active rootfs suffix: [0015.532] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0015.539] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0015.546] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0015.554] W> No valid slot number is found in scratch register [0015.559] W> Return default slot: _a [0015.563] I> Active slot suffix: [0015.566] I> add_boot_slot_suffix: slot_suffix = [0015.571] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0015.597] I> Updated bootarg info to DTB [0015.601] W> MAC addr invalid! [0015.603] E> Failed to get WIFI MAC address [0015.607] W> MAC addr invalid! [0015.610] E> Failed to get Bluetooth MAC address [0015.615] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3a:86:41 [0015.622] W> "plugin-manager" doesn't exist, creating [0015.626] I> Adding /chosen/plugin-manager/cvm [0015.630] W> "chip-id" doesn't exist, creating [0015.634] I> Adding /chosen/plugin-manager/chip-id [0015.639] W> "configs" doesn't exist, creating [0015.643] I> Adding /chosen/plugin-manager/configs [0015.648] W> "ids" doesn't exist, creating [0015.652] I> Adding /chosen/plugin-manager/ids [0015.657] W> "odm-data" doesn't exist, creating [0015.661] I> Adding /chosen/plugin-manager/odm-data [0015.668] W> "memory" doesn't exist, creating [0015.670] I> [0] START: 0x80000000, END: 0xac000000 [0015.674] I> [1] START: 0xac004000, END: 0xf0ad0000 [0015.679] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0015.684] I> dram_block larger than 80000000 [0015.688] I> [3] START: 0x100000000, END: 0x880000000 [0015.693] I> added [base:0x80000000, size:0x2c000000] to /memory [0015.698] I> added [base:0xac200000, size:0x44800000] to /memory [0015.704] I> added [base:0x100000000, size:0x780000000] to /memory [0015.711] I> Updated memory info to DTB [0015.714] E> add_disp_param: failed to get display params for du=0 [0015.720] W> "reset" doesn't exist, creating [0015.725] I> Adding ecid(00000001647d02832000000005028200) to DT [0015.730] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0015.735] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0015.739] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0015.744] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0015.749] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0015.754] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0015.758] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0015.763] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0015.768] W> "misc-data" doesn't exist, creating [0015.773] I> Boot-device: eMMC [0015.775] I> Add boot-sdmmc to plugin-manager/misc-data [0015.780] I> Add storage-sdmmc to plugin-manager/misc-data [0015.786] W> Unknown storage device [0015.789] I> Add serial number:1560321001733 as DT property [0015.796] I> Plugin-manager override starting [0015.799] I> node /plugin-manager/fragement-soft-wdt matches [0015.806] I> node /plugin-manager/fragement-tegra-wdt-en matches [0015.813] I> node /plugin-manager/fragment-pcie-c5-rp matches [0015.819] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0015.824] I> Disable plugin-manager status in FDT [0015.826] I> Plugin-manager override finished successfully [0015.832] I> tegrabl_load_kernel_and_dtb: Done [0015.836] E> tegrabl_display_clear: display is not initialized [0015.842] W> Boot logo display failed... [0015.845] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-5285-d7000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Feb 19 08:42:04 PST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.831755] gpiochip_add_data: GPIOs 288..511 (tegra-gpio) failed to register [ 0.831795] gpio-tegra186 2200000.gpio: Could not register gpiochip, -517 [ 0.832608] gpiochip_add_data: GPIOs 472..511 (tegra-gpio-aon) failed to register [ 0.832647] gpio-tegra186 c2f0000.gpio: Could not register gpiochip, -517 [ 1.560127] tegradc 15200000.nvdisplay: failed to parse disp_default_out,-517 [ 1.614366] ufs_tegra 2450000.ufshci: ufshcd_get_vreg: vcc get failed, err=-517 [ 1.614533] ufs_tegra 2450000.ufshci: Initialization failed [ 1.614759] ufs_tegra 2450000.ufshci: ufshcd_pltfrm_init() failed -517 [ 7.047593] ucsi_ccg 1-0008: Setup irq fail, err=-38 [ 7.197073] FAN: of_property_read failed [ 7.247667] tegra_aon_mbox_send_data mbox send failed with error -7 [ 7.269758] tegra_aon_mbox_send_data mbox send failed with error -7 [ 7.269928] tegra186-aondbg aondbg: mbox_send_message failed [ 7.270052] tegra_clocks_config: initialization failed: error -62 [ 10.119162] tegra-pcie-dw 141a0000.pcie: DT parsing failed: -517 [ 10.158803] ufs_tegra 2450000.ufshci: ufshcd_get_vreg: vcc get failed, err=-517 [ 10.158946] ufs_tegra 2450000.ufshci: Initialization failed [ 10.159167] ufs_tegra 2450000.ufshci: ufshcd_pltfrm_init() failed -517 [ 10.219295] tegradc 15200000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 10.943074] kernel BUG at /dvs/git/dirty/git-master_linux/kernel/nvidia/drivers/platform/tegra/tegra-ivc.c:494! [ 10.943274] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 10.943369] Modules linked in: [ 10.943451] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.9.201-tegra #1 [ 10.943584] Hardware name: Jetson-AGX (DT) [ 10.943659] task: ffffffc7dc778000 task.stack: ffffffc7dc72c000 [ 10.943764] PC is at ivc_write_frame+0x2c0/0x2c8 [ 10.943845] LR is at tegra_ivc_write+0x38/0x48 [ 10.943930] pc : [] lr : [] pstate: 80c000c5 [ 10.944055] sp : ffffffc7dc72fbb0 [ 10.944119] x29: ffffffc7dc72fbb0 x28: ffffff8009825478 [ 10.944238] x27: ffffff8009669288 x26: ffffff80095ed9b8 [ 10.944353] x25: ffffff800a143000 x24: ffffff8009600490 [ 10.944708] x23: 0000000000000000 x22: 0000000000000000 [ 10.945146] x21: ffffff800fc14080 x20: 0000000000000000 [ 10.945584] x19: ffffffc7d7bcba98 x18: 00000000000003ea [ 10.946040] x17: 0000000000000002 x16: 0000000000000003 [ 10.948140] x15: 0000000000000000 x14: 0000000000000001 [ 10.953827] x13: 0000000000000bf1 x12: ffffffffffffffff [ 10.959678] x11: 000000000000002e x10: 0000000000000007 [ 10.965452] x9 : 0000000000000000 x8 : ffffffc7dc72fcc0 [ 10.970977] x7 : 0000000000000000 x6 : 00000000332b4fab [ 10.976740] x5 : 00ffffffffffffff x4 : 0000000000000000 [ 10.982080] x3 : 0000000000000000 x2 : 0000000000000010 [ 10.987415] x1 : ffffff800fc14080 x0 : 0000000000000000 [ 10.992760] [ 10.993902] Process swapper/0 (pid: 1, stack limit = 0xffffffc7dc72c000) [ 11.000291] Call trace: [ 11.002649] [] ivc_write_frame+0x2c0/0x2c8 [ 11.007985] [] tegra_ivc_write+0x38/0x48 [ 11.013319] [] tegra_aon_mbox_send_data+0x34/0x88 [ 11.018925] [] msg_submit+0xa8/0x128 [ 11.023736] [] mbox_send_message+0x84/0x158 [ 11.029331] [] aon_create_ivc_dbg_req+0xb0/0x258 [ 11.035194] [] tegra_aon_get_pllaon_state+0x3c/0xa0 [ 11.041321] [] clk_aon_is_enabled+0x14/0x20 [ 11.046399] [] clk_unprepare_unused_subtree+0x64/0x1d0 [ 11.052611] [] clk_disable_unused+0x9c/0x138 [ 11.058558] [] do_one_initcall+0x44/0x130 [ 11.064246] [] kernel_init_freeable+0x1a0/0x244 [ 11.070113] [] kernel_init+0x18/0x108 [ 11.075533] [] ret_from_fork+0x10/0x30 [ 11.081055] ---[ end trace 5cbb1920bb50e83f ]--- [ 11.092969] note: swapper/0[1] exited with preempt_count 1 [ 11.093230] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 11.093230] [ 11.100038] SMP: stopping secondary CPUs [ 11.103981] Kernel Offset: disabled [ 11.107815] Memory Limit: none [ 11.110966] trusty-log panic notifier - trusty version Built: 08:40:57 Feb 19 2021 [ 11.125801] Rebooting in 5 seconds.. 00.063] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39) [0000.069] I> Boot-mode: Coldboot [0000.072] I> Chip revision : A02P [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x2 [0000.089] I> rst_source : 0xb [0000.092] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 35000 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.184] I> ECC region[1]: Start:0x0, End:0x0 [0000.188] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.225] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.251] I> Boot-device: eMMC [0000.260] I> sdmmc bdev is already initialized [0000.333] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.341] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-feba5943) [0000.342] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.343] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.343] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.349] W> device prod register failed [0000.353] I> Boot-device: eMMC [0000.356] I> Boot_device: SDMMC_BOOT instance: 3 [0000.362] I> sdmmc-3 params source = boot args [0000.365] I> sdmmc bdev is already initialized [0000.369] I> sdmmc-3 params source = boot args [0000.377] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.384] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.385] W> No valid slot number is found in scratch register [0000.390] W> Return default slot: _a [0000.393] I> Active Boot chain : 0 [0000.397] I> parsing oem signed section of bpmp-fw header done [0000.402] I> bpmp-fw binary init read from storage [0000.407] I> oem authentication of bpmp-fw header done [0000.414] I> bpmp-fw binary done read from storage [0000.416] I> bpmp-fw: Authentication init Done [0000.421] I> parsing oem signed section of cpubl header done [0000.426] I> cpubl binary init read from storage [0000.431] I> bpmp-fw: Authentication Finalize Done [0000.436] I> oem authentication of cpubl header done [0000.440] I> cpubl binary done read from storage [0000.445] I> cpubl: Authentication init Done [0000.450] I> parsing oem signed section of rce header done [0000.454] I> rce binary init read from storage [0000.459] I> Relocating BR-BCT [0000.461] I> cpubl: Authentication Finalize Done [0000.466] I> oem authentication of rce header done [0000.470] I> rce binary done read from storage [0000.475] I> rce: Authentication init Done [0000.479] I> parsing oem signed section of ape header done [0000.484] I> ape binary init read from storage [0000.488] I> rce: Authentication Finalize Done [0000.493] I> oem authentication of ape header done [0000.497] I> ape binary done read from storage [0000.501] I> ape: Authentication init Done [0000.506] I> parsing oem signed section of tos header done [0000.511] I> tos binary init read from storage [0000.515] I> ape: Authentication Finalize Done [0000.520] I> oem authentication of tos header done [0000.524] I> tos binary done read from storage [0000.528] I> tos: Authentication init Done [0000.532] I> parsing oem signed section of bpmp-fw-dtb header done [0000.538] I> bpmp-fw-dtb binary init read from storage [0000.543] I> tos: Authentication Finalize Done [0000.549] I> oem authentication of bpmp-fw-dtb header done [0000.556] I> bpmp-fw-dtb binary done read from storage [0000.558] I> bpmp-fw-dtb: Authentication init Done [0000.563] I> parsing oem signed section of cpubl-dtb header done [0000.568] I> cpubl-dtb binary init read from storage [0000.573] I> bpmp-fw-dtb: Authentication Finalize Done [0000.610] I> oem authentication of cpubl-dtb header done [0000.611] I> cpubl-dtb binary done read from storage [0000.612] I> cpubl-dtb: Authentication init Done [0000.613] I> parsing oem signed section of eks header done [0000.614] I> eks binary init read from storage [0000.615] I> cpubl-dtb: Authentication Finalize Done [0000.615] I> oem authentication of eks header done [0000.619] I> eks binary done read from storage [0000.623] I> eks: Authentication init Done [0000.627] I> eks: Authentication Finalize Done [0000.631] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 08:38:54, Feb 19 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 197: key_mgnt_processing ....... hwkey-agent: 189: Setting EKB key 0 to slot 14 hwkey-agent: 167: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ÿá [0001.132] I> Welcome to Cboot ÿâfmon_post initialized ÿá[0001.133] I> Cboot Version: t194-9efcbc4f [0001.133] I> CPU-BL Params @ 0xf2820000 [0001.133] I> 0) Base:0x00000000 Size:0x00000000 [0001.137] I> 1) Base:0xf1100000 Size:0x00100000 [0001.142] I> 2) Base:0xf2000000 Size:0x00200000 [0001.146] I> 3) Base:0xf1200000 Size:0x00200000 ÿâclk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ÿá[0001.150] I> 4) Base:0xf1000000 Size:0x00100000 [0001.230] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.234] I> 6) Base:0xf3800000 Size:0x00400000 [0001.239] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.243] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.248] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.252] I> 10) Base:0xf3000000 Size:0x00800000 [0001.257] I> 11) Base:0x40000000 Size:0x00040000 [0001.261] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.266] I> 13) Base:0x40046000 Size:0x00002000 [0001.270] I> 14) Base:0x40048000 Size:0x00002000 ÿâemc_debugfs initialized dvs_debugfs initialized ÿá[0001.275] I> 15) Base:0xac000000 Size:0x00004000 [0001.284] I> 16) Base:0x4004a000 Size:0x00002000 ÿâfmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá[0001.288] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.339] I> 18) Base:0x4004c000 Size:0x00002000 [0001.343] I> 19) Base:0xf2200000 Size:0x00600000 [0001.348] I> 20) Base:0x4004e000 Size:0x00002000 [0001.352] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.356] I> 22) Base:0x00000000 Size:0x00000000 [0001.361] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.365] I> 24) Base:0xf6000000 Size:0x02000000 [0001.370] I> 25) Base:0x40050000 Size:0x00002000 [0001.374] I> 26) Base:0x40040000 Size:0x00006000 [0001.379] I> 27) Base:0xf1800000 Size:0x00400000 [0001.383] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.388] I> 29) Base:0xf1400000 Size:0x00400000 [0001.392] I> 30) Base:0x00000000 Size:0x00000000 [0001.397] I> 31) Base:0x00000000 Size:0x00000000 [0001.401] I> 32) Base:0xf8000000 Size:0x08000000 [0001.406] I> 33) Base:0x00000000 Size:0x00000000 [0001.410] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.415] I> 35) Base:0xab000000 Size:0x01000000 [0001.419] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.423] I> 37) Base:0xf2800000 Size:0x00800000 [0001.428] I> 38) Base:0x80000000 Size:0x20000000 [0001.432] I> 39) Base:0xb0000000 Size:0x08000000 [0001.437] I> 40) Base:0x00000000 Size:0x00000000 [0001.441] I> 41) Base:0x00000000 Size:0x00000000 [0001.446] I> 42) Base:0x00000000 Size:0x00000000 [0001.450] I> 43) Base:0x00000000 Size:0x00000000 [0001.455] I> 44) Base:0x00000000 Size:0x00000000 [0001.459] I> 45) Base:0x00000000 Size:0x00000000 [0001.464] GIC-SPI Target CPU: 0 [0001.467] Interrupts Init done [0001.469] calling constructors [0001.472] initializing heap [0001.475] I> Heap: [0xa06945e8 ... 0xab000000] [0001.479] initializing threads [0001.482] initializing timers [0001.485] creating bootstrap completion thread [0001.489] top of bootstrap2() [0001.492] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.497] initializing platform [0001.500] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.505] W> device prod register failed [0001.509] I> Bl_dtb @0xaaf00000 [0001.515] W> "plugin-manager" doesn't exist, creating [0001.517] W> "ids" doesn't exist, creating [0001.521] W> "connection" doesn't exist, creating [0001.525] W> "configs" doesn't exist, creating [0001.536] I> Find /i2c@3160000's alias i2c0 [0001.537] I> Reading eeprom i2c=0 address=0x50 [0001.563] I> Device at /i2c@3160000:0x50 [0001.563] I> Reading eeprom i2c=0 address=0x56 [0001.588] I> Device at /i2c@3160000:0x56 [0001.589] I> Find /i2c@3180000's alias i2c2 [0001.590] I> Reading eeprom i2c=2 address=0x54 [0001.591] E> I2C: slave not found in slaves. [0001.592] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.593] E> I2C_DEV: Failed to send register address 0x00000000. [0001.593] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.602] E> eeprom: Failed to read I2C slave device [0001.607] I> Eeprom read failed 0x3526070d [0001.611] I> Reading eeprom i2c=2 address=0x57 [0001.615] E> I2C: slave not found in slaves. [0001.619] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.627] E> I2C_DEV: Failed to send register address 0x00000000. [0001.632] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.642] E> eeprom: Failed to read I2C slave device [0001.647] I> Eeprom read failed 0x3526070d [0001.651] I> Reading eeprom i2c=2 address=0x52 [0001.655] E> I2C: slave not found in slaves. [0001.659] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.667] E> I2C_DEV: Failed to send register address 0x00000000. [0001.673] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.682] E> eeprom: Failed to read I2C slave device [0001.687] I> Eeprom read failed 0x3526070d [0001.692] I> Find /i2c@c240000's alias i2c1 [0001.695] I> Reading eeprom i2c=1 address=0x52 [0001.701] E> I2C: slave not found in slaves. [0001.703] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.711] E> I2C_DEV: Failed to send register address 0x00000000. [0001.717] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.726] E> eeprom: Retry to read I2C slave device. [0001.731] E> I2C: slave not found in slaves. [0001.735] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.743] E> I2C_DEV: Failed to send register address 0x00000000. [0001.748] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.758] E> eeprom: Failed to read I2C slave device [0001.763] I> Eeprom read failed 0x3526070d [0001.767] I> Reading eeprom i2c=1 address=0x50 [0001.771] E> I2C: slave not found in slaves. [0001.775] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.783] E> I2C_DEV: Failed to send register address 0x00000000. [0001.789] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.798] E> eeprom: Retry to read I2C slave device. [0001.803] E> I2C: slave not found in slaves. [0001.807] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.815] E> I2C_DEV: Failed to send register address 0x00000000. [0001.820] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.830] E> eeprom: Failed to read I2C slave device [0001.835] I> Eeprom read failed 0x3526070d [0001.839] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0001.844] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.855] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0001.860] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.871] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.879] W> "i2c@3160000" doesn't exist, creating [0001.883] W> "module@0x50" doesn't exist, creating [0001.888] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.895] W> "module@0x56" doesn't exist, creating [0001.902] I> Adding plugin-manager/cvm [0001.903] W> "chip-id" doesn't exist, creating [0001.907] I> Adding plugin-manager/chip-id/A02P [0001.911] I> Plugin-manager override starting [0001.917] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.925] I> node /plugin-manager/fragement-soft-wdt matches [0001.934] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.939] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.950] I> Disable plugin-manager status in FDT [0001.950] I> Plugin-manager override finished successfully [0001.950] I> gpio framework initialized [0001.953] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.961] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.967] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.975] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.983] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.989] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.995] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.002] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.010] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.017] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.024] I> fixed regulator driver initialized [0002.035] I> register 'maxim' power off handle [0002.036] I> virtual i2c enabled [0002.036] I> registered 'maxim,max20024' pmic [0002.039] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.045] I> Boot-device: eMMC [0002.048] I> Boot_device: SDMMC_BOOT instance: 3 [0002.057] I> sdmmc-3 params source = boot args [0002.057] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.062] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.073] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0002.078] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.089] I> sdmmc bdev is already initialized [0002.094] I> sdmmc-3 params source = boot args [0002.124] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.137] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.147] I> enabling 'vdd-hdmi-5v0' regulator [0002.152] I> regulator 'vdd-hdmi-5v0' already enabled [0002.152] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.153] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.157] E> invalid display type [0002.161] E> invalid display type [0002.162] E> cannot find any other nvdisp nodes [0002.162] E> no valid display unit config found in dtb [0002.164] W> display init failed [0002.164] I> Load in CBoot Boot Options partition and parse it [0002.175] E> Error -9 when finding node with path /boot-configuration [0002.175] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.182] I> Using default boot order [0002.186] I> boot-dev-order :- [0002.189] I> 1.sd [0002.190] I> 2.usb [0002.192] I> 3.nvme [0002.194] I> 4.emmc [0002.196] I> 5.net [0002.198] I> Hit any key to stop autoboot: 4 3 2 1 [0004.206] initializing target [0004.206] calling apps_init() [0004.207] starting app kernel_boot_app [0004.226] I> found decompressor handler: lz4-legacy [0004.227] I> decompressing BMP blob ... [0004.238] I> Kernel type = Normal [0004.238] I> Loading kernel-bootctrl from partition [0004.239] I> Loading partition kernel-bootctrl at 0xa42d0000 from device(0x1) [0004.245] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.246] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.246] I> ########## SD (0) boot ########## [0004.247] I> No sdcard [0004.248] I> -0 params source = [0004.251] E> Blockdev open: exit error [0004.255] E> SD boot failed, err: 724238353 [0004.259] I> ########## USB (0) boot ########## [0004.268] W> No valid slot number is found in scratch register [0004.269] W> Return default slot: _a [0004.285] I> USB Firmware Version: 60.06 release [0004.341] I> regulator of usb2-0 already enabled [0004.348] I> regulator of usb2-1 already enabled [0004.356] I> regulator of usb2-2 already enabled [0004.366] I> enabling 'vdd-5v-sata' regulator