[0000.064] I> MB1 (version: 0.23.0.0-t234-54845784-92215740) [0000.069] I> t234-A01-0-Silicon (0x12347) Prod [0000.074] I> Boot-mode : Coldboot [0000.077] I> Emulation: [0000.079] I> Entry timestamp: 0x00000000 [0000.083] I> last_boot_error: 0x0 [0000.086] I> BR-BCT: preprod_dev_sign: 0 [0000.090] I> rst_source: 0x2, rst_level: 0x1 [0000.094] I> Task: CRC check (0x5001cf71) [0000.098] I> Skip CRC check as records_integrity fuse is not burned [0000.104] I> Task: Crypto init (0x5001c0d9) [0000.108] I> Task: Secure debug controls (0x5000cb19) [0000.113] I> Task: strap war set (0x5000b739) [0000.117] I> strap value(0x4000401) set to 0x4000401 [0000.122] I> Task: Initialize SOC Therm (0x5001a509) [0000.127] I> Task: Program NV master stream id (0x5000cad1) [0000.132] I> Task: Verify boot mode (0xd482021) [0000.138] I> Task: Alias fuses (0x50010749) [0000.143] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.150] I> Task: Print SKU type (0x5000fba9) [0000.154] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.159] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.164] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.168] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.172] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.176] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.180] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.185] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.189] I> FUSE_SKU_INFO_0 = 0xd0 [0000.192] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.196] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.200] I> SKU: Prod [0000.202] I> Task: Boost clocks (0x50013db1) [0000.206] I> Initializing PLLC2 for AXI_CBB. [0000.210] I> AXI_CBB : src = 35, divisor = 0 [0000.214] I> Task: Voltage monitor (0x50013dbd) [0000.219] I> VMON: Vmon re-calibration and fine tuning done [0000.224] I> Task: UPHY init (0x5000da39) [0000.229] E> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.234] I> Task: Boot device init (0x50000a3d) [0000.239] I> Boot_device: QSPI_FLASH instance: 0 [0000.243] I> Qspi clock source : pllc_out0 [0000.247] I> QSPI Flash: Macronix 64MB [0000.251] I> QSPI-0l initialized successfully [0000.255] I> Task: TSC init (0x5001ed35) [0000.259] I> Task: Load membct (0x5001190d) [0000.263] I> RAM_CODE 0x4000401 [0000.266] I> Loading MEM-BCT to SysRAM [0000.270] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.275] I> Slot: 0 [0000.277] I> Binary[0] block-0 (partition size: 0x40000) [0000.282] I> get_binary_info: Binary name: MEM-BCT-0 [0000.287] I> Size of crypto header is 8192 [0000.291] I> BCH load address is : 0x40050000 [0000.295] I> Size of crypto header is 8192 [0000.299] I> BCH of MEM-BCT-0 read from storage [0000.304] I> BCH address is : 0x40050000 [0000.308] I> MEM-BCT-0 header integrity check is success [0000.313] I> Binary magic in BCH component 0 is MEM0 [0000.317] I> component binary type is 0 [0000.322] I> MEM-BCT-0 binary is read from storage [0000.327] I> MEM-BCT-0 binary integrity check is success [0000.332] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.338] I> RAM_CODE 0x4000401 [0000.344] I> RAM_CODE 0x4000401 [0000.348] I> Task: Load Page retirement list (0x50011139) [0000.353] I> Task: SDRAM params override (0x50011b79) [0000.358] I> Task: Save mem-bct info (0x50014071) [0000.362] I> Task: Carveout allocate (0x500140d5) [0000.367] I> RCM blob carveout will not be allocated [0000.372] I> ECC region[0]: Start:0x0, End:0x0 [0000.376] I> ECC region[1]: Start:0x0, End:0x0 [0000.380] I> ECC region[2]: Start:0x0, End:0x0 [0000.384] I> ECC region[3]: Start:0x0, End:0x0 [0000.389] I> ECC region[4]: Start:0x0, End:0x0 [0000.393] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.399] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.404] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.408] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.413] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.422] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.430] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.437] I> allocated(CO:39) base:0x83a000000 size:0x6000000 align: 0x200000 [0000.444] I> allocated(CO:20) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.451] I> allocated(CO:24) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.458] I> allocated(CO:28) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.465] I> allocated(CO:29) base:0x832000000 size:0x2000000 align: 0x2000000 [0000.472] I> allocated(CO:43) base:0x830000000 size:0x2000000 align: 0x200000 [0000.479] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.486] I> allocated(CO:41) base:0x82f000000 size:0x1000000 align: 0x100000 [0000.493] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.500] I> allocated(CO:03) base:0x82e800000 size:0x800000 align: 0x800000 [0000.507] I> allocated(CO:06) base:0x82e000000 size:0x800000 align: 0x800000 [0000.514] I> allocated(CO:10) base:0x82d800000 size:0x800000 align: 0x800000 [0000.521] I> allocated(CO:56) base:0x82d000000 size:0x800000 align: 0x200000 [0000.528] I> allocated(CO:07) base:0x82cc00000 size:0x400000 align: 0x400000 [0000.535] I> allocated(CO:33) base:0x82c800000 size:0x400000 align: 0x200000 [0000.542] I> allocated(CO:47) base:0x82c400000 size:0x400000 align: 0x200000 [0000.549] I> allocated(CO:72) base:0x82c200000 size:0x200000 align: 0x10000 [0000.555] I> allocated(CO:01) base:0x82c100000 size:0x100000 align: 0x100000 [0000.562] I> allocated(CO:04) base:0x82c000000 size:0x100000 align: 0x100000 [0000.569] I> allocated(CO:05) base:0x82bf00000 size:0x100000 align: 0x100000 [0000.576] I> allocated(CO:08) base:0x82be00000 size:0x100000 align: 0x100000 [0000.583] I> allocated(CO:09) base:0x82bd00000 size:0x100000 align: 0x100000 [0000.590] I> allocated(CO:15) base:0x82bc00000 size:0x100000 align: 0x100000 [0000.597] I> allocated(CO:17) base:0x82bb00000 size:0x100000 align: 0x100000 [0000.604] I> allocated(CO:23) base:0x82ba00000 size:0x100000 align: 0x100000 [0000.611] I> allocated(CO:27) base:0x82b900000 size:0x100000 align: 0x100000 [0000.618] I> allocated(CO:42) base:0x82b800000 size:0x100000 align: 0x100000 [0000.625] I> allocated(CO:54) base:0x82b780000 size:0x80000 align: 0x80000 [0000.631] I> allocated(CO:26) base:0x82b740000 size:0x40000 align: 0x2000 [0000.638] I> allocated(CO:48) base:0x82b720000 size:0x20000 align: 0x10000 [0000.645] I> allocated(CO:69) base:0x82b700000 size:0x20000 align: 0x10000 [0000.652] I> allocated(CO:34) base:0x82b6f0000 size:0x10000 align: 0x10000 [0000.658] I> allocated(CO:35) base:0x82b6e0000 size:0x10000 align: 0x10000 [0000.665] I> allocated(CO:49) base:0x82b6d0000 size:0x10000 align: 0x10000 [0000.672] I> allocated(CO:50) base:0x82b6c0000 size:0x10000 align: 0x10000 [0000.679] I> allocated(CO:52) base:0x82b6b0000 size:0x10000 align: 0x10000 [0000.685] I> Task: Thermal check (0x5001fba1) [0000.689] I> max_chip_limit = 115 [0000.693] I> min_chip_limit = -30 [0000.696] I> max temp read = 41 [0000.699] I> min temp read = 40 [0000.702] I> Task: Update FSI SCR with thermal fuse data (0x5001fc3d) [0000.708] I> Task: Enable WDT 5th expiry (0x5001f929) [0000.713] I> Task: Disable WDT globally (0x5001f965) [0000.718] I> Task: I2C register (0x50000a31) [0000.722] I> Task: Reset FSI (0x50013db9) [0000.726] I> Task: Pinmux init (0x50013219) [0000.730] I> Task: Prod config init (0x50013631) [0000.735] I> Task: Pad voltage init (0x500132a5) [0000.739] I> Task: Prod init (0x500136d5) [0000.743] I> Task: Common rail init (0x50013bd1) [0000.747] W> Thermal config not found in BCT [0000.752] W> Generic i2c config not found in BCT [0000.756] W> Platform rail config not found in BCT [0000.762] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.770] W> MEMIO rail config not found in BCT [0000.774] I> Task: Mem clock src (0x500119c5) [0000.779] I> Task: Misc. board config (0x50013c29) [0000.783] W> Platform config not found in BCT [0000.787] I> Task: SDRAM init (0x500119c9) [0000.794] I> SDRAM-params @ 0xd485000 [0000.797] I> MSS code-drop: NvBootSdramInit [0000.801] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [0000.809] I> MSS CAR: Init PLLM [0000.812] I> MSS CAR: Init PLLHUB [0000.817] I> Encryption: MTS: en, TX: dis, VPR: dis, GSC: en [0000.828] I> mb1_sdram_init Done ! [0000.832] I> SDRAM Size in Total 0x800000000 [0000.836] I> Task: Dram Ecc scrub (0x50011261) [0000.840] I> Task: DRAM alias check (0x50011b71) [0000.871] I> Task: Program NSDRAM carveout (0x50014921) [0000.878] I> NSDRAM carveout encryption is disabled [0000.883] I> Program NSDRAM carveout [0000.887] I> Task: Register checker (0x50011b75) [0000.896] I> Task: Enable clock-mon (0x5001ed25) [0000.912] I> FMON: Fmon re-programming done [0000.917] I> Task: Mapper init (0x5001d451) [0000.922] I> Task: SC7 Context Init (0x5001f02d) [0000.928] I> Task: CCPLEX IST init (0x5000d335) [0000.934] I> Task: CPU WP0 (0x5000c635) [0000.939] I> Loading MCE [0000.942] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.948] I> Slot: 0 [0000.950] I> Binary[8] block-0 (partition size: 0x80000) [0000.956] I> get_binary_info: Binary name: MCE [0000.961] I> Size of crypto header is 8192 [0000.965] I> BCH load address is : 0x4003e000 [0000.971] I> Size of crypto header is 8192 [0000.976] I> BCH of MCE read from storage [0000.980] I> BCH address is : 0x4003e000 [0000.985] I> MCE header integrity check is success [0000.990] I> Binary magic in BCH component 0 is MTSM [0000.996] I> component binary type is 8 [0001.000] I> Size of crypto header is 8192 [0001.006] I> MCE binary is read from storage [0001.012] I> MCE binary integrity check is success [0001.017] I> Binary MCE loaded successfully at 0x40000000 (0x2c080) [0001.024] I> Size of crypto header is 8192 [0001.039] I> Size of crypto header is 8192 [0001.044] I> Sending WP0 mailbox command to PSC [0001.055] I> Task: MB1 fixed firewalls (0x5001e55d) [0001.073] I> Task: Load bpmp-fw (0x5001e801) [0001.079] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.085] I> Slot: 0 [0001.087] I> Binary[15] block-0 (partition size: 0x180000) [0001.093] I> get_binary_info: Binary name: BPMP_FW [0001.099] I> Size of crypto header is 8192 [0001.103] I> BCH load address is : 0x807fe000 [0001.109] I> Size of crypto header is 8192 [0001.113] I> BCH of BPMP_FW read from storage [0001.118] I> BCH address is : 0x807fe000 [0001.124] I> BPMP_FW header integrity check is success [0001.129] I> Binary magic in BCH component 0 is BPMF [0001.134] I> component binary type is 15 [0001.138] I> Size of crypto header is 8192 [0001.154] I> BPMP_FW binary is read from storage [0001.161] I> BPMP_FW binary integrity check is success [0001.166] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfb3c0) [0001.175] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.180] I> Slot: 0 [0001.183] I> Binary[16] block-10000 (partition size: 0x400000) [0001.190] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.195] I> Size of crypto header is 8192 [0001.200] I> BCH load address is : 0x807fc000 [0001.205] I> Size of crypto header is 8192 [0001.210] I> BCH of BPMP_FW_DTB read from storage [0001.215] I> BCH address is : 0x807fc000 [0001.221] I> BPMP_FW_DTB header integrity check is success [0001.226] I> Binary magic in BCH component 0 is BPMD [0001.232] I> component binary type is 16 [0001.236] I> Size of crypto header is 8192 [0001.242] I> BPMP_FW_DTB binary is read from storage [0001.248] I> BPMP_FW_DTB binary integrity check is success [0001.254] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20440) [0001.263] I> Task: Load psc-fw (0x5001ea0d) [0001.268] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.274] I> Slot: 0 [0001.277] I> Binary[17] block-0 (partition size: 0xc0000) [0001.283] I> get_binary_info: Binary name: PSC_FW [0001.288] I> Size of crypto header is 8192 [0001.292] I> BCH load address is : 0x80ffe000 [0001.298] I> Size of crypto header is 8192 [0001.303] I> BCH of PSC_FW read from storage [0001.307] I> BCH address is : 0x80ffe000 [0001.313] I> PSC_FW header integrity check is success [0001.318] I> Binary magic in BCH component 0 is PFWP [0001.323] I> component binary type is 17 [0001.328] I> Size of crypto header is 8192 [0001.338] I> PSC_FW binary is read from storage [0001.344] I> PSC_FW binary integrity check is success [0001.349] I> Binary PSC_FW loaded successfully at 0x80000000 (0x7d000) [0001.357] I> Task: Load nvdec-fw (0x5001ea81) [0001.363] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.369] I> Slot: 0 [0001.371] I> Binary[7] block-0 (partition size: 0x100000) [0001.377] I> get_binary_info: Binary name: NVDEC [0001.382] I> Size of crypto header is 8192 [0001.387] I> BCH load address is : 0x800fe000 [0001.393] I> Size of crypto header is 8192 [0001.397] I> BCH of NVDEC read from storage [0001.402] I> BCH address is : 0x800fe000 [0001.407] I> NVDEC header integrity check is success [0001.413] I> Binary magic in BCH component 0 is NDEC [0001.418] I> component binary type is 7 [0001.422] I> Size of crypto header is 8192 [0001.429] I> NVDEC binary is read from storage [0001.435] I> NVDEC binary integrity check is success [0001.440] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.450] I> Task: Load tsec-fw (0x5001ec6d) [0001.456] I> TSEC-FW load support not enabled [0001.460] I> Task: Program misc carveouts (0x5001445d) [0001.467] I> Program IPC carveouts [0001.474] I> Task: GPIO interrupt map (0x50013cc5) [0001.480] I> Task: SC7 context save (0x5001f161) [0001.486] I> NV_SC7 Context addr: 0xa0000000 [0001.491] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.497] I> Slot: 0 [0001.499] I> Binary[27] block-0 (partition size: 0x100000) [0001.506] I> get_binary_info: Binary name: BR_BCT [0001.511] I> Size of crypto header is 8192 [0001.515] I> Size of crypto header is 8192 [0001.520] I> BR_BCT binary is read from storage [0001.526] I> BR_BCT binary integrity check is success [0001.531] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.539] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.545] I> Slot: 0 [0001.547] I> Binary[13] block-0 (partition size: 0x30000) [0001.553] I> get_binary_info: Binary name: SC7-FW [0001.558] I> Size of crypto header is 8192 [0001.563] I> Size of crypto header is 8192 [0001.567] I> BCH load address is : 0xa0002000 [0001.573] I> Size of crypto header is 8192 [0001.578] I> BCH of SC7-FW read from storage [0001.582] I> BCH address is : 0xa0002000 [0001.588] I> SC7-FW header integrity check is success [0001.593] I> Binary magic in BCH component 0 is WB0B [0001.598] I> component binary type is 13 [0001.602] I> Size of crypto header is 8192 [0001.609] I> SC7-FW binary is read from storage [0001.614] I> SC7-FW binary integrity check is success [0001.620] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x25460) [0001.628] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.634] I> Slot: 0 [0001.636] I> Binary[22] block-0 (partition size: 0x30000) [0001.642] I> get_binary_info: Binary name: PSC_RF [0001.647] I> Size of crypto header is 8192 [0001.652] I> Size of crypto header is 8192 [0001.656] I> BCH load address is : 0xa0029460 [0001.662] I> Size of crypto header is 8192 [0001.667] I> BCH of PSC_RF read from storage [0001.671] I> BCH address is : 0xa0029460 [0001.677] I> PSC_RF header integrity check is success [0001.682] I> Binary magic in BCH component 0 is PSCR [0001.688] I> component binary type is 22 [0001.692] I> Size of crypto header is 8192 [0001.698] I> PSC_RF binary is read from storage [0001.703] I> PSC_RF binary integrity check is success [0001.709] I> Binary PSC_RF loaded successfully at 0xa002b460 (0x1bd20) [0001.728] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.734] I> Slot: 0 [0001.737] I> Binary[14] block-0 (partition size: 0x20000) [0001.743] I> get_binary_info: Binary name: MB2_RF [0001.748] I> Size of crypto header is 8192 [0001.752] I> Size of crypto header is 8192 [0001.757] I> BCH load address is : 0xa008e240 [0001.762] I> Size of crypto header is 8192 [0001.767] I> BCH of MB2_RF read from storage [0001.772] I> BCH address is : 0xa008e240 [0001.777] I> MB2_RF header integrity check is success [0001.783] I> Binary magic in BCH component 0 is MB2R [0001.788] I> component binary type is 14 [0001.792] I> Size of crypto header is 8192 [0001.798] I> MB2_RF binary is read from storage [0001.804] I> MB2_RF binary integrity check is success [0001.809] I> Binary MB2_RF loaded successfully at 0xa0090240 (0x1bdc0) [0001.818] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.826] I> SC7 context fuse-bypass data is empty [0001.834] I> SC7 context save done [0001.838] I> Task: Load MB2/Applet/FSKP (0x5000d451) [0001.844] I> Loading MB2 [0001.847] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.852] I> Slot: 0 [0001.855] I> Binary[6] block-0 (partition size: 0x80000) [0001.861] I> get_binary_info: Binary name: MB2 [0001.866] I> Size of crypto header is 8192 [0001.870] I> BCH load address is : 0x8007e000 [0001.876] I> Size of crypto header is 8192 [0001.881] I> BCH of MB2 read from storage [0001.885] I> BCH address is : 0x8007e000 [0001.890] I> MB2 header integrity check is success [0001.896] I> Binary magic in BCH component 0 is MB2B [0001.901] I> component binary type is 6 [0001.905] I> Size of crypto header is 8192 [0001.914] I> MB2 binary is read from storage [0001.920] I> MB2 binary integrity check is success [0001.925] I> Binary MB2 loaded successfully at 0x80000000 (0x686c0) [0001.933] I> Task: Map CCPLEX SHARED carveout (0x5000d521) [0001.940] I> Task: Prepare MB2 params (0x5000d5dd) [0001.949] I> MB2-params @ 0x40060000 [0001.956] I> BR-BCT Boot Chain Fields [0001.960] I> u32_non_gpio_select_boot_chain : 0 [0001.965] I> u32_num_boot_chains : 2 [0001.970] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.977] I> Task: Dram ecc test (0x500112cd) [0001.982] I> Task: Misc NV security settings (0x5000ced5) [0001.989] I> NVDEC sticky bits programming done [0001.994] I> Task: Disable/Reload WDT (0x5001f991) [0002.000] I> Programmed SLCG global override := 0x0 [0002.005] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-e33bc3dc) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f374d I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x82d000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e6c) I> Task: Enable hot-plug capability (0x50020e7c) I> Task: PSC mailbox init (0x50011ed0) I> Task: Crypto init (0x5000513c) I> Task: Enable GP-SE clock (0x50001fd0) I> Task: I2C register (0x50001e30) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e18) I> Task: Boot device init (0x50001d60) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d5c) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x50017428) I> Task: Load AUXP FWs (0x50020a1c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82be00000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82bb00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x838000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9481872 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x838000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82cc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82bf00000 I> Task: Carveout setup (0x50019c94) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50011da4) I> Task: Enable FSI VMON (0x50011944) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x5001199c) I> FSITHERM max temp = 41 I> FSITHERM min temp = 41 I> Task: Restore XUSB sec (0x50001d30) I> Task: Enable FSI SE clock (0x5001232c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f34) I> Task: Initialize CPUBL Params (0x50013384) I> CPUBL-params @ 0x834000000 I> Task: Prepare eeprom data (0x50013140) I> Task: OEM firewalls (0x5001df14) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> OEM firewalls configured I> Task: Unhalt AUXPs (0x50020c84) I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 2e3d77fae66a40ac8e7a91531ae7d9b3 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler �� I> Task: Trigger mailbox for PSC-BL1 exit (0x50011f50) I> Sending opcode 0x4d420802 to psc ��INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848000000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: e061f86-9e1f578-2508c43-dev-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ��I> Received ACK from psc I> Task: Sta��INFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 �� ��rt secure NOR provision (0x50014924) I> Task: Load FSI keyblob (0x50012368) I> Skipping FSI key blob copy I> Task: Unhalt AUXPs (0x50020c8c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x5001347c) I> Task: Load TOS (0x50013b38) I> Task: Load and authenticate registered FWs (0x50017428) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu-bo��[ 2.391230] Camera-FW on t234-rce-safe started ��bpmp: init bpmp: base binary md5 is eac380526d68ff45ffc86d0feae98e88 bpmp: combined binary md5 is 888a114dda6bea50b6c6bb224445ac85 bpmp: firmware tag is 888a114dda6bea50b6c6-eac380526d6 initialized vwdt initialized mail_early ��INFO: MONITOR: populated user images:19 INFO: mret to Supervisor! INFO: psc supervisor ��initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized ��TCU early console enabled. ��mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized ��init. INFO: psc_irq_init... INFO: enter idle task. ��clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized thermal initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ��otloader I> Size of partition: 36700��initialized avfs_clk_platform initialized powergate �� ��16 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloa��initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized emc initialized emc_mrq ��der ��initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq initialized mce_dbell missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ��I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:��initialized clk_cal_late initialized noc_late initialized dmce initialized cvc ��3/0 block-32000 (partition size: ��initialized avfs_clk_mach_post initialized pm_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable adspneon enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable nvdec enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable��[ 2.623147] Camer�� xusb_fs enable xusb_falcon enable xusb_core_mux ena��a-FW on t234-rce-safe��ble dsi_lp enable sdmmc_legacy_tm initialized clk_mac�� ready SHA1=7a10e461 ��h_post initialized pg_post initialized regulator_post initialized profile ��(crt 13.247 ms, total boot 254.494 ms) ��initialized fuse_late initialized mrq initialized patrol_scrubber initialized extras_post bpmp: init complete ��0x400000), name: A_secure-os I> MB2-params @ 0x40060000 I> cpubl: Authentication Finalize Done I> Binary cpubl loaded successfully at 0x82c400000 ��DCE: FW Boot Done ��I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x831e06000 I> Relocating OP-TEE dtb from: 0x831eff700 to 0x82b700000, size: 0x996 I> [0] START: 0x80000000, SIZE: 0x7ab600000 I> [1] START: 0x82c400000, SIZE: 0x400000 I> [2] START: 0x82d000000, SIZE: 0x800000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x82d000400 I> EKB detected (length: 0x410) @ VA:0x82d000400 I> Task: Prepare TOS params (0x50013ab0) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82b700000 I> Task: OEM SC7 context save (0x500146bc) I> oem sc7 context saved I> Task: Disable MSS perf stats (0x50020d18) I> Task: Program display sticky bits (0x50020c94) I> Task: Storage device deinit (0x50001ed8) I> Task: SMMU external bypass disable (0x50011eb4) I> Task: SMMU init (0x50011dd0) I> Task: Program CBB PCIE AMAP regions (0x50014b08) I> Task: Program GICv3 registers (0x50020db8) I> Task: Audit firewall settings (0x5001e1c0) I> Task: Bootchain failure check (0x500026a4) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ��NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 03:23:19 UTC 2022 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! E/TC:00 0 jetson_user_key_pta_init:700 jetson_user_key_pta_init: Failed (f0100006). E/TC:00 0 call_initcalls:43 Initcall __text_start + 0x000dab50 failed I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map...