[0000.137] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c368a720) [0000.145] I> Boot-device: eMMC [0000.153] I> sdmmc bdev is already initialized [0000.157] I> pmic: reset reason (nverc) : 0x0 [0000.190] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.210] I> Found 38 partitions in SDMMC_USER (instance 3) [0000.216] W> No valid slot number is found in scratch register [0000.222] W> Return default slot: _a [0000.225] I> A/B: bin_type (16) slot 0 [0000.229] I> Loading partition bpmp-fw at 0xd7800000 [0000.234] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.239] I> Addr: 0xd7800000, start-block: 26271752, num_blocks: 1 [0000.264] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.270] W> No valid slot number is found in scratch register [0000.276] W> Return default slot: _a [0000.279] I> A/B: bin_type (17) slot 0 [0000.283] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.288] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.293] I> Addr: 0xd79f0000, start-block: 26274168, num_blocks: 1 [0000.312] I> Binary(17) of size 113248 is loaded @ 0xd79e4400 [0000.340] I> Loading SCE-FW ... [0000.343] W> No valid slot number is found in scratch register [0000.349] W> Return default slot: _a [0000.352] I> A/B: bin_type (12) slot 0 [0000.356] I> Loading partition sce-fw at 0xd7300000 [0000.361] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.366] I> Addr: 0xd7300000, start-block: 26278264, num_blocks: 1 [0000.385] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.391] I> Init SCE [0000.393] I> Loading APE-FW ... [0000.396] W> No valid slot number is found in scratch register [0000.402] W> Return default slot: _a [0000.406] I> A/B: bin_type (11) slot 0 [0000.409] I> Loading partition adsp-fw at 0xd7400000 [0000.414] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.419] I> Addr: 0xd7400000, start-block: 26255368, num_blocks: 1 [0000.438] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.444] I> Copy BTCM section [0000.447] W> No valid slot number is found in scratch register [0000.453] W> Return default slot: _a [0000.456] I> A/B: bin_type (13) slot 0 [0000.460] I> Loading partition cpu-bootloader at 0x96000000 [0000.465] I> Reading two headers - addr:0x96000000 blocks:1 [0000.471] I> Addr: 0x96000000, start-block: 26234888, num_blocks: 1 [0000.492] I> Binary(13) of size 308800 is loaded @ 0x96000000 [0000.497] W> No valid slot number is found in scratch register [0000.503] W> Return default slot: _a [0000.506] I> A/B: bin_type (20) slot 0 [0000.510] I> Loading partition bootloader-dtb at 0x85205400 [0000.516] I> Reading two headers - addr:0x85205400 blocks:1 [0000.521] I> Addr: 0x85205400, start-block: 26236936, num_blocks: 1 [0000.540] I> Binary(20) of size 192320 is loaded @ 0x85205400 [0000.546] W> No valid slot number is found in scratch register [0000.552] W> Return default slot: _a [0000.555] I> A/B: bin_type (14) slot 0 [0000.559] I> Loading partition secure-os at 0x85305600 [0000.564] I> Reading two headers - addr:0x85305600 blocks:1 [0000.569] I> Addr: 0x85305600, start-block: 26238984, num_blocks: 1 [0000.592] I> Binary(14) of size 402864 is loaded @ 0x85305600 [0000.599] I> TOS boot-params @ 0x85000000 [0000.603] I> TOS params prepared [0000.606] I> Loading EKS ... [0000.609] I> A/B: bin_type (15) slot 0 [0000.613] I> Loading partition eks at 0x85905800 [0000.617] I> Reading two headers - addr:0x85905800 blocks:1 [0000.623] I> Addr: 0x85905800, start-block: 26251272, num_blocks: 1 [0000.641] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.647] I> EKB detected (length: 0x400) @ 0x85905800 [0000.652] I> Copied encrypted keys [0000.656] I> boot profiler @ 0x175844000 [0000.659] I> boot profiler for TOS @ 0x175844000 [0000.664] I> Unhalting SCE [0000.667] I> Primary Memory Start:80000000 Size:70000000 [0000.672] I> Extended Memory Start:f0110000 Size:856f0000 [0000.679] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 12:15:17, Jul 26 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 315: key_mgnt_processing ....... hwkey-agent: 223: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0000.900] I> Welcome to Cboot [0000.903] I> Cboot Version: t186-00029e71 [0000.907] I> CPU-BL Params @ 0x175800000 [0000.910] I> 0) Base:0x00000000 Size:0x00000000 [0000.915] I> 1) Base:0x177f00000 Size:0x00100000 [0000.919] I> 2) Base:0x177e00000 Size:0x00100000 [0000.924] I> 3) Base:0x177d00000 Size:0x00100000 [0000.928] I> 4) Base:0x177c00000 Size:0x00100000 [0000.933] I> 5) Base:0x177b00000 Size:0x00100000 [0000.937] I> 6) Base:0x177800000 Size:0x00200000 [0000.942] I> 7) Base:0x177400000 Size:0x00400000 [0000.947] I> 8) Base:0x177a00000 Size:0x00100000 [0000.951] I> 9) Base:0x177300000 Size:0x00100000 [0000.956] I> 10) Base:0x176800000 Size:0x00800000 [0000.960] I> 11) Base:0x30000000 Size:0x00040000 [0000.964] I> 12) Base:0xf0000000 Size:0x00100000 [0000.969] I> 13) Base:0x30040000 Size:0x00001000 [0000.973] I> 14) Base:0x30048000 Size:0x00001000 [0000.978] I> 15) Base:0x30049000 Size:0x00001000 [0000.982] I> 16) Base:0x3004a000 Size:0x00001000 [0000.987] I> 17) Base:0x3004b000 Size:0x00001000 [0000.991] I> 18) Base:0x3004c000 Size:0x00001000 [0000.996] I> 19) Base:0x3004d000 Size:0x00001000 [0001.000] I> 20) Base:0x3004e000 Size:0x00001000 [0001.004] I> 21) Base:0x3004f000 Size:0x00001000 [0001.009] I> 22) Base:0x00000000 Size:0x00000000 [0001.013] I> 23) Base:0xf0100000 Size:0x00010000 [0001.018] I> 24) Base:0x00000000 Size:0x00000000 [0001.022] I> 25) Base:0x00000000 Size:0x00000000 [0001.027] I> 26) Base:0x00000000 Size:0x00000000 [0001.031] I> 27) Base:0x00000000 Size:0x00000000 [0001.035] I> 28) Base:0x84400000 Size:0x00400000 [0001.040] I> 29) Base:0x30000000 Size:0x00010000 [0001.044] I> 30) Base:0x178000000 Size:0x08000000 [0001.049] I> 31) Base:0x00000000 Size:0x00000000 [0001.053] I> 32) Base:0x176000000 Size:0x00600000 [0001.058] I> 33) Base:0x80000000 Size:0x70000000 [0001.062] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.067] I> 35) Base:0x00000000 Size:0x00000000 [0001.071] I> 36) Base:0x00000000 Size:0x00000000 [0001.075] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.080] I> 38) Base:0x84000000 Size:0x00400000 [0001.084] I> 39) Base:0x96000000 Size:0x02000000 [0001.089] I> 40) Base:0x85000000 Size:0x01200000 [0001.093] I> 41) Base:0x175800000 Size:0x00500000 [0001.098] I> 42) Base:0x00000000 Size:0x00000000 [0001.102] I> 43) Base:0x00000000 Size:0x00000000 [0001.107] GIC-SPI Target CPU: 4 [0001.110] Interrupts Init done [0001.113] calling constructors [0001.116] initializing heap [0001.119] initializing threads [0001.122] initializing timers [0001.125] creating bootstrap completion thread [0001.130] top of bootstrap2() [0001.133] CPU: ARM Cortex A57 [0001.137] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.142] initializing platform [0001.145] I> Bl_dtb @0x85205400 [0001.148] I> gpio framework initialized [0001.153] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.162] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.169] I> GPIO framework and drivers are initialized. [0001.175] I> Boot-device: eMMC [0001.182] I> sdmmc bdev is already initialized [0001.212] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.230] I> Found 38 partitions in SDMMC_USER (instance 3) [0001.236] W> opt-in fuse is not set, skip fuse_burning [0001.240] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.246] W> No valid slot number is found in scratch register [0001.252] W> Return default slot: _a [0001.261] I> A/B: bin_type (21) slot 0 [0001.265] I> Loading kernel-dtb from partition [0001.269] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.287] I> Kernel_dtb @0x80000000 [0001.290] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.298] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.308] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.316] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.322] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.330] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.340] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.348] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.355] I> fixed regulator driver initialized [0001.377] I> register 'maxim' power off handle [0001.382] I> virtual i2c enabled [0001.385] I> registered 'maxim,max77620' pmic [0001.390] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.400] E> failed to read label property for node 149928: 13 [0001.407] E> failed to read reg property for node 150024: 13 [0001.414] E> failed to read reg property for node 150076: 13 [0001.420] E> failed to read label property for node 150160: 13 [0001.427] E> failed to read reg property for node 150228: 13 [0001.434] E> failed to read reg property for node 150300: 13 [0001.441] I> Find /i2c@c250000's alias i2c7 [0001.445] I> Reading eeprom i2c=7 address=0x50 [0001.475] I> Device at /i2c@c250000:0x50 [0001.478] I> Reading eeprom i2c=7 address=0x57 [0001.483] E> I2C: slave not found in slaves. [0001.487] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.495] E> I2C_DEV: Failed to send register address 0x00000000. [0001.500] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.510] E> eeprom: Failed to read I2C slave device [0001.515] I> Eeprom read failed 0x3526070d [0001.519] I> Find /i2c@3160000's alias i2c0 [0001.523] I> Reading eeprom i2c=0 address=0x50 [0001.530] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0001.537] E> I2C: Failed to clear bus for instance 0. [0001.542] E> I2C: Failed to clear bus for instance 0. [0001.547] E> I2C_DEV: Failed to initialize instance 0. [0001.552] E> eeprom: Can't get handle to eeprom device @160 [0001.557] I> Eeprom read failed 0x3536002a [0001.562] I> Find /i2c@3180000's alias i2c2 [0001.566] I> Reading eeprom i2c=2 address=0x54 [0001.570] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.575] C> GPIO driver for chip_id 0x2 could not be found [0001.580] E> cam_eeprom_read: Can't get gpio driver [0001.585] I> Eeprom read failed 0x4d4d000d [0001.589] I> Reading eeprom i2c=2 address=0x57 [0001.593] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.598] C> GPIO driver for chip_id 0x2 could not be found [0001.603] E> cam_eeprom_read: Can't get gpio driver [0001.608] I> Eeprom read failed 0x4d4d000d [0001.612] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0001.617] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.640] I> regulator 'vdd-hdmi-5v0' already enabled [0001.651] I> regulator 'vdd-hdmi-5v0' already enabled [0001.656] I> hdmi cable connected [0001.661] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0001.669] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0001.675] I> retrieved tmds range from prod_list_hdmi_soc [0001.681] E> cannot find any other nvdisp nodes [0001.689] E> I2C: slave not found in slaves. [0001.693] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.700] E> I2C_DEV: Failed to send register address 0x00000000. [0001.706] E> I2C_DEV: Could not read 128 registers of size 1 from slave 0xa0 at 0x00000000 via instance 3. [0001.716] E> could not read edid [0001.722] I> hdmi_enable, starting HDMI initialisation [0001.729] I> hdmi_enable, HDMI initialisation complete [0001.742] initializing target [0001.745] calling apps_init() [0001.749] starting app kernel_boot_app [0001.771] I> found decompressor handler: lz4-legacy [0001.775] I> decompressing BMP blob ... [0001.787] I> Kernel type = Normal [0001.790] I> ########## Fixed storage boot ########## [0001.795] I> Loading kernel-bootctrl from partition [0001.800] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.814] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.821] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0001.828] W> No valid slot number is found in scratch register [0001.833] W> Return default slot: _a [0001.837] I> A/B: bin_type (24) slot 0 [0001.852] I> Boot image size read from image header: 99085 [0001.858] I> Boot image load address: 0x80400000 [0001.862] I> Loading kernel from partition [0001.866] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.809] I> Validate kernel ... [0002.812] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.820] I> Decrypt the buffer ... [0002.823] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.832] I> done [0002.834] I> Checking boot.img header magic ... [0002.838] I> [OK] [0002.840] I> kernel-dtb is already loaded [0002.844] I> Validate kernel-dtb ... [0002.847] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0002.854] I> Decrypt the buffer ... [0002.857] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.866] I> done [0002.868] I> Kernel hdr @0x80400000 [0002.871] I> Kernel dtb @0x80000000 [0002.875] I> decompressor handler not found [0002.879] I> Copying kernel image (626821 bytes) from 0x80400800 to 0x80600000 ... [0002.886] I> Done [0002.888] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0002.895] I> Updated bpmp info to DTB [0002.900] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0002.904] I> Updated initrd info to DTB [0002.908] W> WARN: Fail to override "console=none" in commandline [0002.914] I> Active rootfs suffix: [0002.917] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0002.925] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0002.932] I> disabled_core_mask: 0xffffff0c [0002.936] W> No valid slot number is found in scratch register [0002.941] W> Return default slot: _a [0002.945] I> Active slot suffix: [0002.948] I> add_boot_slot_suffix: slot_suffix = [0002.952] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.000] I> Updated bootarg info to DTB [0003.003] W> MAC addr invalid! [0003.006] E> Failed to get WIFI MAC address [0003.010] W> MAC addr invalid! [0003.013] E> Failed to get Bluetooth MAC address [0003.017] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3b:67:6b [0003.024] E> Found no plugin manager ids in source DT [0003.028] W> Add plugin manager ids from board info [0003.033] W> "plugin-manager" doesn't exist, creating [0003.038] W> "ids" doesn't exist, creating [0003.042] W> "connection" doesn't exist, creating [0003.047] W> "configs" doesn't exist, creating [0003.051] I> create_pm_ids: id: 3636-0001-300-H, len: 15 [0003.056] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.067] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.074] W> "i2c@c250000" doesn't exist, creating [0003.079] W> "module@0x50" doesn't exist, creating [0003.085] I> Adding plugin-manager/ids/3636-0001-300-H [0003.091] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.096] I> Adding plugin-manager/configs/3636-power-config 00 [0003.102] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.108] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.114] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.120] I> Adding plugin-manager/configs/3636-display-config 00 [0003.126] I> Adding plugin-manager/cvm [0003.130] W> "chip-id" doesn't exist, creating [0003.134] I> Adding plugin-manager/chip-id/A02P [0003.138] W> "odm-data" doesn't exist, creating [0003.143] I> Adding /chosen/plugin-manager/odm-data [0003.151] I> added [base:0x80000000, size:0x70000000] to /memory [0003.157] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.163] I> added [base:0x175e00000, size:0x200000] to /memory [0003.168] I> added [base:0x176600000, size:0x200000] to /memory [0003.174] I> added [base:0x177000000, size:0x200000] to /memory [0003.180] I> Updated memory info to DTB [0003.184] E> add_disp_param: failed to get display params for du=1 [0003.191] W> "reset" doesn't exist, creating [0003.195] W> "pmc-reset-reason" doesn't exist, creating [0003.201] W> "pmic-reset-reason" doesn't exist, creating [0003.207] I> Adding ecid(000000016405d0c604000000020481c0) to DT [0003.212] I> disabled_core_mask: 0xffffff0c [0003.221] I> Add serial number:1422021024227 as DT property [0003.228] I> Plugin-manager override starting [0003.233] I> node /plugin-manager/fragement@0 matches [0003.241] I> node /plugin-manager/fragement@3 matches [0003.254] I> Disable plugin-manager status in FDT [0003.259] I> Plugin-manager override finished successfully [0003.264] I> tegrabl_load_kernel_and_dtb: Done [0003.309] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g46e4604c78 (Jul 26 2021 - 12:10:58 -0700) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 858 bytes read in 29 ms (28.3 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 7238344 bytes read in 195 ms (35.4 MiB/s) Retrieving file: /boot/Image 34484232 bytes read in 828 ms (39.7 MiB/s) append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 0000000080033ed4 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00800000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 1.381991] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.389554] imx219 9-0010: board setup failed [ 1.417498] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.425124] imx219 10-0010: board setup failed [ 1.857054] cgroup: cgroup2: unknown option "nsdelegate" [ 3.202728] using random self ethernet address [ 3.207247] using random host ethernet address [ 3.424258] using random self ethernet address [ 3.432664] using random host ethernet address Ubuntu 18.04.5 LTS tegra-ubuntu ttyS0 tegra-ubuntu login: [ 9.664581] vaboxsystem: loading out-of-tree module taints kernel. [ 10.679704] watchdog: watchdog0: watchdog did not stop! [ 10.688530] watchdog: watchdog0: watchdog did not stop! [ 10.707206] watchdog: watchdog0: watchdog did not stop! [ 23.526894] watchdog: watchdog0: watchdog did not stop! [ 33.034908] random: crng init done [ 33.038318] random: 7 urandom warning(s) missed due to ratelimiting Ubuntu 18.04.5 LTS VADevice_48b02d3b676b ttyS0