[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (nvidia@nvidia-virtual-machine) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Mar 1 17:20:40 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem: 00140000@96085000 [ 0.000000] Found lut_mem: 00002008@96081000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1006269 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523453 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 990453 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x140000@0x96085000 lut_mem=0x2008@0x96081000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk1p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29772(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3154756K/4025076K available (15422K kernel code, 2958K rwdata, 6704K rodata, 8640K init, 610K bss, 116656K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f90000 ( 15424 KB) [ 0.000000] .rodata : 0xffffff8008f90000 - 0xffffff8009620000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009620000 - 0xffffff8009e90000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e90000 - 0xffffff800a173808 ( 2959 KB) [ 0.000000] .bss : 0xffffff800a173808 - 0xffffff800a20c0f4 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000929] Console: colour dummy device 80x25 [ 0.000934] console [tty0] enabled [ 0.000938] bootconsole [uart8250] disabled [ 0.000946] kmemleak: Kernel memory leak detector disabled [ 0.000956] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000963] pid_max: default: 32768 minimum: 301 [ 0.001265] Security Framework initialized [ 0.001419] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001423] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001992] ftrace: allocating 47255 entries in 185 pages [ 0.126195] sched-energy: Sched-energy-costs installed from DT [ 0.126206] ASID allocator initialised with 65536 entries [ 0.161016] tegra-id: chipid=21817. [ 0.161022] tegra-id: opt_subrevision=1. [ 0.161041] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.161048] DTS File Name: /work/gitlab/jetson_tx2_nx/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01-6002-emmc.dts [ 0.161053] DTB Build time: [ 0.210662] CPU1: Booted secondary processor [4e0f0030] [ 0.242018] CPU2: Booted secondary processor [4e0f0030] [ 0.273038] CPU3: Booted secondary processor [411fd073] [ 0.304997] CPU4: Booted secondary processor [411fd073] [ 0.337007] CPU5: Booted secondary processor [411fd073] [ 0.337066] Brought up 6 CPUs [ 0.337070] SMP: Total of 6 processors activated. [ 0.337075] CPU features: detected feature: 32-bit EL0 Support [ 0.339129] CPU: All CPU(s) started at EL2 [ 0.339264] alternatives: patching kernel code [ 0.341795] devtmpfs: initialized [ 0.364646] Initilizing CustomIPI irq domain [ 0.364788] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.364798] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.373417] pinctrl core: initialized pinctrl subsystem [ 0.373660] OS set in device tree is not L4T. [ 0.373829] regulator-dummy: no parameters [ 0.373966] Initializing plugin-manager [ 0.374020] Plugin module not found [ 0.374055] Plugin-manager status disabled [ 0.375161] NET: Registered protocol family 16 [ 0.376134] pstore: using zlib compression [ 0.376148] console [pstore-1] enabled [ 0.376151] pstore: Registered ramoops as persistent store backend [ 0.376155] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 0.389052] cpuidle: using governor menu [ 0.390029] bpmp: waiting for handshake [ 0.390032] bpmp: handshake completed [ 0.390051] bpmp: synchronizing channels [ 0.390058] bpmp: channels synchronized [ 0.390061] bpmp: mail init ok [ 0.391558] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.391563] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.391567] arm-smmu 12000000.iommu: stage 1 translation [ 0.391571] arm-smmu 12000000.iommu: stage 2 translation [ 0.391574] arm-smmu 12000000.iommu: nested translation [ 0.391580] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.391585] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.391589] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.391594] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.391597] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.393367] vdso: 2 pages (1 code @ ffffff8008f97000, 1 data @ ffffff8009e94000) [ 0.393380] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.396653] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.397661] Registering BPMP clocks... [ 0.397730] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.398184] Serial: AMBA PL011 UART driver [ 0.399056] tegra_powergate_init: DONE [ 0.399064] DTS File Name: /work/gitlab/jetson_tx2_nx/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/tegra186-p3636-0001-p3509-0000-a01-6002-emmc.dts [ 0.399069] DTB Build time: [ 0.400369] Tegra reboot handler registered. [ 0.401525] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.401588] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.401601] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.401603] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.401606] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.401758] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.401769] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.402041] iommu: Adding device 3460000.sdhci to group 0 [ 0.403186] iommu: Adding device 3160000.i2c to group 1 [ 0.403583] iommu: Adding device c240000.i2c to group 2 [ 0.403875] iommu: Adding device 3180000.i2c to group 3 [ 0.404159] iommu: Adding device 3190000.i2c to group 4 [ 0.404534] iommu: Adding device 31b0000.i2c to group 5 [ 0.404842] iommu: Adding device 31c0000.i2c to group 6 [ 0.405148] iommu: Adding device c250000.i2c to group 7 [ 0.405437] iommu: Adding device 31e0000.i2c to group 8 [ 0.406886] iommu: Adding device 3210000.spi to group 9 [ 0.407175] iommu: Adding device c260000.spi to group 10 [ 0.407818] iommu: Adding device 3100000.serial to group 11 [ 0.408108] iommu: Adding device 3110000.serial to group 12 [ 0.408399] iommu: Adding device c280000.serial to group 13 [ 0.408681] iommu: Adding device 3130000.serial to group 14 [ 0.409847] iommu: Adding device 2490000.ether_qos to group 15 [ 0.409860] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.410683] iommu: Adding device b000000.rtcpu to group 16 [ 0.412384] iommu: Adding device 13e10000.host1x to group 17 [ 0.412672] iommu: Adding device 13e10000.host1x:ctx0 to group 18 [ 0.412941] iommu: Adding device 13e10000.host1x:ctx1 to group 19 [ 0.413243] iommu: Adding device 13e10000.host1x:ctx2 to group 20 [ 0.413531] iommu: Adding device 13e10000.host1x:ctx3 to group 21 [ 0.413806] iommu: Adding device 13e10000.host1x:ctx4 to group 22 [ 0.414078] iommu: Adding device 13e10000.host1x:ctx5 to group 23 [ 0.414360] iommu: Adding device 13e10000.host1x:ctx6 to group 24 [ 0.414637] iommu: Adding device 13e10000.host1x:ctx7 to group 25 [ 0.415049] iommu: Adding device 150c0000.nvcsi to group 26 [ 0.415598] iommu: Adding device 15700000.vi to group 27 [ 0.415911] iommu: Adding device 15600000.isp to group 28 [ 0.416107] iommu: Adding device 15200000.dc_common to group 29 [ 0.416149] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x140000) [ 0.416166] platform 15200000.dc_common: OF IOVA linear map 0x96081000 size (0x2008) [ 0.416623] iommu: Adding device 15200000.nvdisplay to group 30 [ 0.416949] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.417305] iommu: Adding device 15340000.vic to group 32 [ 0.417501] iommu: Adding device 154c0000.nvenc to group 33 [ 0.417691] iommu: Adding device 15480000.nvdec to group 34 [ 0.418000] iommu: Adding device 15380000.nvjpg to group 35 [ 0.418192] iommu: Adding device 15500000.tsec to group 36 [ 0.418380] iommu: Adding device 15100000.tsecb to group 37 [ 0.419251] iommu: Adding device 15810000.se to group 38 [ 0.419441] iommu: Adding device 15820000.se to group 39 [ 0.419633] iommu: Adding device 15830000.se to group 40 [ 0.419823] iommu: Adding device 15840000.se to group 41 [ 0.420586] iommu: Adding device smmu_test to group 42 [ 0.421168] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c10000 [ 0.421179] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c20000 [ 0.421189] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c30000 [ 0.421199] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c40000 [ 0.421208] mc: mapped MMIO address: 0xffffff800b150000 -> 0x2c50000 [ 0.421216] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.421226] mc-err: mcerr ops are set to t18x [ 0.421370] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.422128] iommu: Adding device 3530000.xhci to group 43 [ 0.422144] arm-smmu: forcing sodev map for 3530000.xhci [ 0.422534] iommu: Adding device 3550000.xudc to group 44 [ 0.422544] arm-smmu: forcing sodev map for 3550000.xudc [ 0.423041] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.423047] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.423052] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.423640] iommu: Adding device 17000000.gp10b to group 45 [ 0.424583] tegra-reset 5000000.clock: registered 193 resets. [ 0.426631] iommu: Adding device d000000.bpmp to group 46 [ 0.426831] bpmp: ping status is 0 [ 0.426905] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.428510] bpmp d000000.bpmp: probe ok [ 0.431145] iommu: Adding device 2600000.dma to group 47 [ 0.431944] GPIO line 424 (camera-control-output-low) hogged as output/low [ 0.431976] GPIO line 427 (camera-control-output-low) hogged as output/low [ 0.432021] GPIO line 408 (w-disable1) hogged as output/high [ 0.432057] GPIO line 410 (w-disable2) hogged as output/high [ 0.432212] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.436031] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.437616] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.437631] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.437948] iommu: Adding device sound to group 49 [ 0.438282] iommu: Adding device 3510000.hda to group 50 [ 0.444830] iommu: Adding device c1a0000.aon to group 51 [ 0.445367] vdd-1v8-ap: 1800 mV [ 0.445570] vdd-ac-bat: 5000 mV [ 0.445749] vdd-3v3-disp-cvb: 3300 mV [ 0.446024] vdd-3v3-cvb: 3300 mV [ 0.446205] vdd-1v8-cvb: 1800 mV [ 0.446500] p3668_vdd_sdmmc3_sw: 3300 mV [ 0.446704] vdd-hdmi-5v0: 5000 mV [ 0.446882] vdd_sys_en: 1200 mV [ 0.473439] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.475974] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.476168] SCSI subsystem initialized [ 0.476272] libata version 3.00 loaded. [ 0.476455] usbcore: registered new interface driver usbfs [ 0.476488] usbcore: registered new interface driver hub [ 0.476515] usbcore: registered new device driver usb [ 0.478863] random: fast init done [ 0.485969] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.488693] vddio-ddr: at 1125 mV [ 0.492563] avdd_dsi_csi: 1200 mV [ 0.496564] vdd-1v8: 1800 mV [ 0.500561] vdd-3v3-sys: 3300 mV [ 0.501213] spmic-ldo0: at 1800 mV [ 0.501843] spmic-ldo1: at 800 mV [ 0.504562] vddio-3v3: 3300 mV [ 0.505214] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.508564] vdd-rtc: at 800 mV [ 0.509127] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.512562] spmic-ldo6: at 800 mV [ 0.516561] vdd-pex-1v00: 1000 mV [ 0.517136] dvdd-pex: 1000 mV [ 0.519107] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.519237] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.519397] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.519580] max77620 4-003c: max77620 probe successful [ 0.519952] media: Linux media interface: v0.10 [ 0.519981] Linux video capture interface: v2.00 [ 0.522216] pps_core: LinuxPPS API ver. 1 registered [ 0.522220] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.522236] PTP clock support registered [ 0.522464] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.522643] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.522659] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.523776] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.523790] trusty trusty: selected api version: 3 (requested 3) [ 0.524532] Advanced Linux Sound Architecture Driver Initialized. [ 0.524883] Bluetooth: Core ver 2.22 [ 0.524910] NET: Registered protocol family 31 [ 0.524913] Bluetooth: HCI device and connection manager initialized [ 0.524920] Bluetooth: HCI socket layer initialized [ 0.524926] Bluetooth: L2CAP socket layer initialized [ 0.524939] Bluetooth: SCO socket layer initialized [ 0.525508] vdd-sys-bl: 3300 mV [ 0.525866] p3509_vdd_otg_5v: 5000 mV [ 0.527386] camchar: rtcpu character device driver loaded [ 0.527861] gpio tegra-gpio wake61 for gpio=92(L:4) [ 0.527935] gpio tegra-gpio wake59 for gpio=89(L:1) [ 0.528005] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.528932] clocksource: Switched to clocksource arch_sys_counter [ 0.551123] VFS: Disk quotas dquot_6.6.0 [ 0.551197] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.551447] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.551894] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.552003] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.552007] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.552014] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.552018] nvmap_page_pool_init: Total RAM pages: 977105 [ 0.552021] nvmap_page_pool_init: nvmap page pool size: 122138 pages (477 MB) [ 0.552082] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.552548] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.554549] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.560166] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.560357] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.560693] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.560767] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.560903] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.561143] la/ptsa driver initialized. [ 0.561152] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.561155] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 0.561446] NET: Registered protocol family 2 [ 0.562043] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.562201] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.562504] TCP: Hash tables configured (established 32768 bind 32768) [ 0.562549] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.562610] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.562877] NET: Registered protocol family 1 [ 0.563225] RPC: Registered named UNIX socket transport module. [ 0.563228] RPC: Registered udp transport module. [ 0.563231] RPC: Registered tcp transport module. [ 0.563233] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.563239] PCI: CLS 0 bytes, default 64 [ 0.563352] Trying to unpack rootfs image as initramfs... [ 0.773416] Freeing initrd memory: 7068K [ 0.788010] host1x 13e10000.host1x: initialized [ 0.789475] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.791600] audit: initializing netlink subsys (disabled) [ 0.791625] audit: type=2000 audit(0.680:1): initialized [ 0.792010] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.798451] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.799400] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.799896] 9p: Installing v9fs 9p2000 file system support [ 0.802009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.802066] io scheduler noop registered [ 0.802268] io scheduler cfq registered (default) [ 0.805162] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.857381] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 0.861029] iommu: Adding device 2993000.adsp to group 53 [ 0.861123] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 0.865538] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.866398] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.867167] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.867931] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.869855] tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration [ 0.870581] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.870864] tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes [ 0.871085] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.871191] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.873047] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 0.873419] tsec 15500000.tsec: initialized [ 0.874310] tsec 15100000.tsecb: initialized [ 0.876501] nvdec 15480000.nvdec: initialized [ 0.880321] falcon 15340000.vic: initialized [ 0.881485] falcon 154c0000.nvenc: initialized [ 0.882553] falcon 15380000.nvjpg: initialized [ 0.884492] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.886057] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.887571] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.889115] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.890633] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.892327] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.893856] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.895375] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.898075] tegradccommon 15200000.dc_common: host1x channel mapped [ 0.898082] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 0.898113] tegradccommon 15200000.dc_common: dma mapping done [ 0.898780] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 0.898818] generic_infoframe_type: 0x87 [ 0.898882] tegradc 15200000.nvdisplay: DT parsed successfully [ 0.898903] tegradc 15200000.nvdisplay: Display dc.ffffff800b3e0000 registered with id=0 [ 0.904609] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.904613] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.904616] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.904791] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 0.904796] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 0.905778] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 640x480 (on 0x0mm) pclk=50347983 [ 0.907837] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 0.907841] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 0.910124] tegradc 15200000.nvdisplay: probed [ 0.911298] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 0.911879] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 0.911902] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.912480] kfuse 3830000.kfuse: initialized [ 0.913770] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.916550] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.918670] console [ttyS0] disabled [ 0.918713] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 33, base_baud = 25500000) is a Tegra [ 0.918759] console [ttyS0] enabled [ 0.919883] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 34, base_baud = 0) is a TEGRA_UART [ 0.920564] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 35, base_baud = 0) is a TEGRA_UART [ 0.920721] serial-tegra 3130000.serial: RX in PIO mode [ 0.921318] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 0.922263] [drm] Initialized [ 0.923387] Console: switching to colour frame buffer device 80x30 [ 0.923409] tegradc 15200000.nvdisplay: fb registered [ 0.923578] gpio tegra-gpio wake21 for gpio=121(P:1) [ 0.923957] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 0.924004] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 0.925086] Parent Clock set for DC plld2 [ 0.929529] brd: module loaded [ 0.932907] loop: module loaded [ 0.933048] tegra_profiler: version: 1.145, samples/io: 49/28 [ 0.933131] tegra_profiler: auth: init [ 0.933774] THERMAL EST: found 3 subdevs [ 0.933779] THERMAL EST num_resources: 0 [ 0.933783] [THERMAL EST subdev 0] [ 0.933787] [THERMAL EST subdev 1] [ 0.933791] [THERMAL EST subdev 2] [ 0.933801] THERMAL EST: Found 2 profiles, default profile is quiet [ 0.934073] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 0.934076] THERMAL EST: thz register success. [ 0.934164] THERMAL EST: end of probe, return err: 0 [ 0.934753] sd: No Scsi addr parsed to reserve index [ 0.934775] hisi_sas: driver version v1.6 [ 0.943611] libphy: Fixed MDIO Bus: probed [ 0.944075] tun: Universal TUN/TAP device driver, 1.6 [ 0.944078] tun: (C) 1999-2004 Max Krasnyansky [ 0.944854] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.944856] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.944890] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.944892] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.945033] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.945036] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.945069] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 0.945071] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 0.985377] tegradc 15200000.nvdisplay: hdmi: tmds rate:50349K prod-setting:prod_c_hdmi_0m_54m [ 0.985801] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 0.985811] tegradc 15200000.nvdisplay: hdmi: BL set VIC 0 [ 0.985815] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 0.999083] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 0.999086] Extcon AUX1(HDMI) enable [ 0.999456] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 0.999571] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.999592] tegradc 15210000.nvdisplay: Display dc.ffffff800b7d0000 registered with id=1 [ 0.999780] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 0.999785] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.007688] tegradc 15210000.nvdisplay: probed [ 1.007858] tegradc 15210000.nvdisplay: fb registered [ 1.011049] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.011053] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.011061] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.011068] tegradc 15210000.nvdisplay: blank - powerdown [ 1.011077] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.011080] Extcon DP: HPD disabled [ 1.011082] hpd: hpd_switch 0 [ 1.011085] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.011093] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.011099] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.116872] tegradc 15200000.nvdisplay: blank - powerdown [ 1.152585] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.152587] Extcon AUX1(HDMI) disable [ 1.175992] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.176788] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.185319] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.189320] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.190291] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 4c 5a [ 1.190341] Using phyrst_lpmode = 1 from DT [ 1.190520] libphy: dwc_phy: probed [ 1.195018] PPP generic driver version 2.4.2 [ 1.195433] PPP BSD Compression module registered [ 1.195438] PPP Deflate Compression module registered [ 1.195491] PPP MPPE Compression module registered [ 1.195499] NET: Registered protocol family 24 [ 1.195603] usbcore: registered new interface driver r8152 [ 1.195648] usbcore: registered new interface driver asix [ 1.195700] usbcore: registered new interface driver ax88179_178a [ 1.195738] usbcore: registered new interface driver cdc_ether [ 1.195768] usbcore: registered new interface driver net1080 [ 1.195811] usbcore: registered new interface driver cdc_subset [ 1.195844] usbcore: registered new interface driver zaurus [ 1.195892] usbcore: registered new interface driver cdc_ncm [ 1.196128] VFIO - User Level meta-driver version: 0.3 [ 1.197753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.197781] ehci-pci: EHCI PCI platform driver [ 1.197817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.197856] ohci-pci: OHCI PCI platform driver [ 1.197892] ohci-platform: OHCI generic platform driver [ 1.201507] tegradc 15200000.nvdisplay: unblank [ 1.202864] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.203114] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.207294] Parent Clock set for DC plld2 [ 1.210080] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.210903] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.211538] tegra-xusb 3530000.xhci: extcon 0: ffffffc0efe56400 id [ 1.212320] usbcore: registered new interface driver uas [ 1.212390] usbcore: registered new interface driver usb-storage [ 1.212513] usbcore: registered new interface driver usbserial [ 1.212564] usbcore: registered new interface driver usbserial_generic [ 1.212610] usbserial: USB Serial support registered for generic [ 1.212663] usbcore: registered new interface driver quatech2 [ 1.212707] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver [ 1.214172] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 1.214196] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.214211] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.214940] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.214965] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 1.215143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.215148] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.215151] usb usb1: Product: xHCI Host Controller [ 1.215153] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.215156] usb usb1: SerialNumber: 3530000.xhci [ 1.215480] hub 1-0:1.0: USB hub found [ 1.215509] hub 1-0:1.0: 4 ports detected [ 1.215993] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.216000] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.216071] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.216131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.216135] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.216138] usb usb2: Product: xHCI Host Controller [ 1.216140] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.216143] usb usb2: SerialNumber: 3530000.xhci [ 1.216424] hub 2-0:1.0: USB hub found [ 1.216452] hub 2-0:1.0: 3 ports detected [ 1.216890] Wake76 for irq=199 [ 1.216892] Wake77 for irq=199 [ 1.216893] Wake78 for irq=199 [ 1.216895] Wake79 for irq=199 [ 1.216896] Wake80 for irq=199 [ 1.216897] Wake81 for irq=199 [ 1.216898] Wake82 for irq=199 [ 1.216950] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 1.216954] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 1.217145] tegra-xudc-new 3550000.xudc: USB charger detection disabled [ 1.217153] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.217370] GobiNet: Meig_GobiNet_Driver_V1.3.9 [ 1.217408] usbcore: registered new interface driver GobiNet [ 1.217499] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.217764] mousedev: PS/2 mouse device common for all mice [ 1.217815] usbcore: registered new interface driver xpad [ 1.219052] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.245561] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.270706] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.270709] Extcon HDMI: HPD enabled [ 1.270728] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.297075] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.317211] usb usb2: usb_suspend_both: status 0 [ 1.342140] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.343191] Wake73 for irq=42 [ 1.344439] rtc rtc1: alarm rtc device [ 1.344449] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.344465] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.344644] i2c /dev entries driver [ 1.345972] imx219 0-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.369317] tegra-i2c 3160000.i2c: no acknowledge from address 0x10 [ 1.369351] imx219 0-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.376965] imx219 0-0010: board setup failed [ 1.381453] imx219: probe of 0-0010 failed with error -121 [ 1.381765] imx219 1-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.405193] tegra-i2c c240000.i2c: no acknowledge from address 0x10 [ 1.405237] imx219 1-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.412888] imx219 1-0010: board setup failed [ 1.417323] imx219: probe of 1-0010 failed with error -121 [ 1.418148] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.422249] parse_throttle_dt_data: Num cap clks = 4 [ 1.422253] parse_throttle_dt_data: clk=mcpu type=1 [ 1.422256] parse_throttle_dt_data: clk=bcpu type=2 [ 1.422263] parse_throttle_dt_data: clk=gpu type=4 [ 1.422266] parse_throttle_dt_data: clk=emc type=3 [ 1.422862] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.423365] FAN dev name: pwm-fan [ 1.423419] FAN:gpio request success. [ 1.423428] FAN: can't find tach_gpio [ 1.423436] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 1.423457] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 1.423635] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.423640] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.424093] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.424097] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 1.424101] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 1.424105] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 1.424109] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.424113] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.424117] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.424121] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.424124] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.424128] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.424627] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 1.425556] device-mapper: uevent: version 1.0.3 [ 1.425875] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.426115] CPU EMC frequency mapping table: from device tree [ 1.428006] cpufreq: platform driver Initialization: pass [ 1.428563] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.428685] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.429554] sdhci: Secure Digital Host Controller Interface driver [ 1.429555] sdhci: Copyright(c) Pierre Ossman [ 1.429557] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.430535] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.432110] CMDQ: cmdq_platfm_init successful [ 1.432611] sdhci-tegra 3440000.sdhci: Missing schmitt enable state [ 1.438940] sdhci-tegra 3440000.sdhci: Missing clk schmitt enable state [ 1.445696] sdhci-tegra 3440000.sdhci: Missing schmitt disable state [ 1.452167] CQE: CMD_TIMING bit set for R1B DCMD [ 1.452937] sdhci-tegra 3440000.sdhci: Missing clk schmitt disable state [ 1.459691] sdhci-tegra 3440000.sdhci: Missing sdmmc drive code state [ 1.466168] sdhci-tegra 3440000.sdhci: Missing sdmmc default drive code state [ 1.473730] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.475442] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 149 [ 1.478707] tegra-se-nvhost 15810000.se: initialized [ 1.479740] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.480195] tegra-se-nvhost 15820000.se: initialized [ 1.481182] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.481626] tegra-se-nvhost 15830000.se: initialized [ 1.482408] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.482836] tegra-se-nvhost 15840000.se: initialized [ 1.483754] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.484445] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.484572] hidraw: raw HID events driver (C) Jiri Kosina [ 1.485568] usbcore: registered new interface driver usbhid [ 1.485571] usbhid: USB HID core driver [ 1.490300] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.491957] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.492162] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.492283] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 1.492945] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 1.493019] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 1.493074] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 1.493129] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 1.493231] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280 [ 1.493526] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (49) [ 1.493529] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.494019] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 1.495565] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.495961] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.496363] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.496677] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.496956] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.497494] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497497] tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000 [ 1.497500] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.497544] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497547] tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000 [ 1.497549] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.497591] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497593] tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000 [ 1.497595] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.497637] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497639] tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000 [ 1.497641] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.497683] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497686] tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000 [ 1.497688] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.497729] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497734] tegra18-bridge 2100000.axip2p: enabled timeout = 9894000 [ 1.497736] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.497810] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497816] tegra18-bridge 2110000.axip2p: enabled timeout = 9894000 [ 1.497818] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.497871] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497876] tegra18-bridge 2120000.axip2p: enabled timeout = 9894000 [ 1.497878] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.497919] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497924] tegra18-bridge 2130000.axip2p: enabled timeout = 9894000 [ 1.497926] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.497967] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.497970] tegra18-bridge 2140000.axip2p: enabled timeout = 9894000 [ 1.497971] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.498013] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.498018] tegra18-bridge 2150000.axip2p: enabled timeout = 9894000 [ 1.498020] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.498070] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.498076] tegra18-bridge 2160000.axip2p: enabled timeout = 9894000 [ 1.498077] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.498119] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.498124] tegra18-bridge 2170000.axip2p: enabled timeout = 9894000 [ 1.498126] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.498170] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.498176] tegra18-bridge 2180000.axip2p: enabled timeout = 9894000 [ 1.498178] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.498220] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds [ 1.498224] tegra18-bridge 2190000.axip2p: enabled timeout = 9894000 [ 1.498226] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.498281] **** A57 ECC: Enabled [ 1.498284] tegra18_a57_serr_init: on CPU 4 a A57 Core [ 1.498350] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.498704] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.499100] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.499220] denver_knobs_init:MTS_VERSION:53679346 [ 1.500941] nvpmodel: initialized successfully [ 1.501744] trusty-virtio trusty:virtio: initializing [ 1.501880] trusty_ipc virtio0: vring0: va(pa) ffffffc0eb39c000(0) qsz 32 notifyid 1 [ 1.501890] trusty_ipc virtio0: vring1: va(pa) ffffffc0eb39e000(0) qsz 32 notifyid 2 [ 1.501950] trusty-virtio trusty:virtio: initializing done [ 1.502036] trusty_ipc virtio0: is online [ 1.503026] usbcore: registered new interface driver snd-usb-audio [ 1.517327] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.517505] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.524942] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.538657] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.540943] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.553478] mmc0: periodic cache flush enabled [ 1.553486] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.557975] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.558120] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.558252] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.562388] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.562781] OPE platform probe [ 1.562868] OPE platform probe successful [ 1.563741] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ 1.563745] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.563748] usb 1-2: Product: USB2.1 Hub [ 1.563750] usb 1-2: Manufacturer: GenesysLogic [ 1.564492] hub 1-2:1.0: USB hub found [ 1.564753] hub 1-2:1.0: 4 ports detected [ 1.567058] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 1.576707] mmc1: hw tuning done ... [ 1.576842] mmc1: new HS200 MMC card at address 0001 [ 1.577142] mmcblk1: mmc1:0001 DUTA42 116 GiB [ 1.577237] mmcblk1boot0: mmc1:0001 DUTA42 partition 1 4.00 MiB [ 1.577328] mmcblk1boot1: mmc1:0001 DUTA42 partition 2 4.00 MiB [ 1.581450] mmcblk1rpmb: mmc1:0001 DUTA42 partition 3 16.0 MiB [ 1.583822] mmcblk1: p1 [ 1.614462] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.614537] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.614606] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.614672] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.614744] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.614812] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.614878] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.614948] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.615014] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.615081] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.615151] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.615218] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.615287] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.615359] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.615431] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.615501] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.615570] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.615636] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.615706] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.615772] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.634653] u32 classifier [ 1.634656] Actions configured [ 1.634714] Initializing XFRM netlink socket [ 1.635249] NET: Registered protocol family 10 [ 1.635819] NET: Registered protocol family 17 [ 1.635829] NET: Registered protocol family 15 [ 1.635884] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.635928] Bluetooth: RFCOMM socket layer initialized [ 1.635937] Bluetooth: RFCOMM ver 1.11 [ 1.635940] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.635944] Bluetooth: HIDP socket layer initialized [ 1.635958] 9pnet: Installing 9P2000 support [ 1.635990] Key type dns_resolver registered [ 1.636266] Registered cp15_barrier emulation handler [ 1.636277] Registered setend emulation handler [ 1.637135] registered taskstats version 1 [ 1.639594] isp 15600000.isp: initialized [ 1.642698] nvcsi 150c0000.nvcsi: initialized [ 1.643628] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 1.646165] Wake83 for irq=51 [ 1.646245] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.646375] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.647539] tegra-vi4 15700000.vi: initialized [ 1.648280] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 1.648341] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 1.677588] tegra_rtc c2a0000.rtc: setting system clock to 2022-03-22 04:39:24 UTC (1647923964) [ 1.678306] mmcblk mmc0:0001: Card claimed for testing. [ 1.678314] mmcblk mmc1:0001: Card claimed for testing. [ 1.681321] usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb [ 1.695490] bpmp: mounted debugfs mirror [ 1.696340] bwmgr: missing cdev-type property [ 1.699848] ALSA device list: [ 1.699851] #0: tegra-hda at 0x3518000 irq 382 [ 1.699853] #1: tegra-snd-t186ref-mobile-rt565x [ 1.702159] Freeing unused kernel memory: 8640K [ 1.704080] usb 2-2: New USB device found, idVendor=05e3, idProduct=0626 [ 1.704085] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.704087] usb 2-2: Product: USB3.1 Hub [ 1.704089] usb 2-2: Manufacturer: GenesysLogic [ 1.707232] hub 2-2:1.0: USB hub found [ 1.707580] hub 2-2:1.0: 4 ports detected [ 1.720947] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.723954] Root device found: mmcblk1p1 [ 1.725065] Found dev node: /dev/mmcblk1p1 [ 1.784430] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.786265] Rootfs mounted over mmcblk1p1 [ 1.805270] Switching from initrd to actual rootfs [ 1.864933] usb 2-2: usb_suspend_both: status 0 [ 1.865048] usb usb2: usb_suspend_both: status 0 [ 1.880938] usb 1-2.2: new full-speed USB device number 3 using tegra-xusb [ 1.906129] usb 1-2.2: New USB device found, idVendor=248a, idProduct=8367 [ 1.906136] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.906140] usb 1-2.2: Product: Wireless Receiver [ 1.906144] usb 1-2.2: Manufacturer: Telink [ 1.910774] input: Telink Wireless Receiver as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:248A:8367.0001/input/input3 [ 1.969188] hid-generic 0003:248A:8367.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-3530000.xhci-2.2/input0 [ 1.971426] input: Telink Wireless Receiver as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2:1.1/0003:248A:8367.0002/input/input4 [ 2.015844] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.025570] cgroup: cgroup2: unknown option "nsdelegate" [ 2.033315] hid-generic 0003:248A:8367.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-3530000.xhci-2.2/input1 [ 2.044908] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.045648] systemd[1]: Detected architecture arm64. [ 2.057093] FAN rising trip_level:1 cur_temp:58400 trip_temps[2]:60000 [ 2.066525] systemd[1]: Set hostname to . [ 2.126966] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.128975] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.155865] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.155873] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.255993] random: systemd: uninitialized urandom read (16 bytes read) [ 2.257447] systemd[1]: Created slice System Slice. [ 2.257600] random: systemd: uninitialized urandom read (16 bytes read) [ 2.257709] systemd[1]: Listening on udev Kernel Socket. [ 2.257735] random: systemd: uninitialized urandom read (16 bytes read) [ 2.257836] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.258018] systemd[1]: Listening on Journal Socket. [ 2.260006] systemd[1]: Mounting Kernel Debug File System... [ 2.300060] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null) [ 2.468892] random: crng init done [ 2.468897] random: 7 urandom warning(s) missed due to ratelimiting [ 2.540956] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.615633] systemd-journald[2277]: Received request to flush runtime journal from PID 1 [ 2.825298] usb 2-2.3: new SuperSpeed USB device number 3 using tegra-xusb [ 2.847309] usb 2-2.3: New USB device found, idVendor=0951, idProduct=1666 [ 2.847314] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.847317] usb 2-2.3: Product: DataTraveler 3.0 [ 2.847320] usb 2-2.3: Manufacturer: Kingston [ 2.847322] usb 2-2.3: SerialNumber: 70C94E84149CE5A1B5280684 [ 2.848116] usb-storage 2-2.3:1.0: USB Mass Storage device detected [ 2.849384] scsi host0: usb-storage 2-2.3:1.0 [ 2.950982] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 2.964960] usb 1-2.4: new low-speed USB device number 5 using tegra-xusb [ 2.990822] usb 1-2.4: New USB device found, idVendor=1a2c, idProduct=501c [ 2.990828] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.990830] usb 1-2.4: Product: USB Keyboard [ 2.990833] usb 1-2.4: Manufacturer: SEM [ 2.994241] input: SEM USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.4/1-2.4:1.0/0003:1A2C:501C.0003/input/input5 [ 3.053451] hid-generic 0003:1A2C:501C.0003: input,hidraw2: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-3530000.xhci-2.4/input0 [ 3.056984] input: SEM USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.4/1-2.4:1.1/0003:1A2C:501C.0004/input/input6 [ 3.117298] hid-generic 0003:1A2C:501C.0004: input,hidraw3: USB HID v1.10 Device [SEM USB Keyboard] on usb-3530000.xhci-2.4/input1 [ 3.177072] FAN rising trip_level:2 cur_temp:62300 trip_temps[3]:68000 [ 3.362958] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.364953] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.418807] CAN device driver interface [ 3.436100] mcp251x spi0.0 can0: MCP2515 successfully initialized. [ 3.459691] using random self ethernet address [ 3.464262] using random host ethernet address [ 3.570392] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.570631] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.777246] bcpu-throttle-alert cooling device registered. [ 3.778418] mcpu-throttle-alert cooling device registered. [ 3.778657] gpu-throttle-alert cooling device registered. [ 3.887578] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ 3.896889] sd 0:0:0:0: [sda] 484519680 512-byte logical blocks: (248 GB/231 GiB) [ 3.905048] sd 0:0:0:0: [sda] Write Protect is off [ 3.912199] sd 0:0:0:0: [sda] Mode Sense: 2b 00 00 08 [ 3.912706] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.008761] Mass Storage Function, version: 2009/09/11 [ 5.008769] LUN: removable file: (no medium) [ 5.018008] using random self ethernet address [ 5.022536] using random host ethernet address [ 5.113844] sda: sda1 [ 5.115643] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.356740] rndis0: HOST MAC 56:cd:b0:24:8f:fc [ 5.357434] rndis0: MAC 56:cd:b0:24:8f:fd [ 5.358951] usb0: HOST MAC 56:cd:b0:24:8f:fe [ 5.358983] usb0: MAC 56:cd:b0:24:8f:ff [ 5.359003] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.369179] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.369203] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.369240] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.369938] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.369952] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.370982] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.370998] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.371637] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.389136] l4tbr0: port 1(rndis0) entered blocking state [ 5.389140] l4tbr0: port 1(rndis0) entered disabled state [ 5.389315] device rndis0 entered promiscuous mode [ 5.413476] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.419558] l4tbr0: port 2(usb0) entered blocking state [ 5.419563] l4tbr0: port 2(usb0) entered disabled state [ 5.419717] device usb0 entered promiscuous mode [ 5.429481] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.653155] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.969991] gpio tegra-gpio-aon wake51 for gpio=47(AA:7) [ 5.973236] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.302256] zram: Added device: zram0 [ 6.305589] zram: Added device: zram1 [ 6.307780] zram: Added device: zram2 [ 6.310917] zram: Added device: zram3 [ 6.311269] zram: Added device: zram4 [ 6.312125] zram: Added device: zram5 [ 6.336136] zram0: detected capacity change from 0 to 334860288 [ 6.752314] Adding 327008k swap on /dev/zram0. Priority:5 extents:1 across:327008k SS [ 6.755596] zram1: detected capacity change from 0 to 334860288 [ 6.766699] Adding 327008k swap on /dev/zram1. Priority:5 extents:1 across:327008k SS [ 6.769410] zram2: detected capacity change from 0 to 334860288 [ 6.783048] Adding 327008k swap on /dev/zram2. Priority:5 extents:1 across:327008k SS [ 6.785600] zram3: detected capacity change from 0 to 334860288 [ 6.795758] Adding 327008k swap on /dev/zram3. Priority:5 extents:1 across:327008k SS [ 6.798401] zram4: detected capacity change from 0 to 334860288 [ 6.807621] Adding 327008k swap on /dev/zram4. Priority:5 extents:1 across:327008k SS [ 6.810154] zram5: detected capacity change from 0 to 334860288 [ 6.819551] Adding 327008k swap on /dev/zram5. Priority:5 extents:1 across:327008k SS [ 8.098745] Bridge firewalling registered [ 8.241515] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.644213] Netfilter messages via NETLINK v0.30. [ 8.690688] ctnetlink v0.93: registering with nfnetlink. [ 8.838263] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 8.839173] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.105529] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.115312] tegradc 15200000.nvdisplay: unblank [ 9.115321] tegradc 15210000.nvdisplay: blank - powerdown [ 10.185099] fuse init (API version 7.26) [ 12.703884] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.703894] Bluetooth: BNEP socket layer initialized [ 31.817610] vdd-3v3-disp-cvb: disabling [ 31.817636] vdd-3v3-cvb: disabling [ 31.817648] vdd-1v8-cvb: disabling [ 31.817669] vdd_sys_en: disabling [ 31.817717] spmic-ldo1: disabling [ 31.818250] vddio-sdmmc1: disabling [ 31.818521] vdd-sys-bl: disabling [ 31.818533] p3509_vdd_otg_5v: disabling [ 35.300222] tegradc 15200000.nvdisplay: blank - powerdown [ 35.362319] extcon-disp-state external-connection:disp-state: cable 47 state 0 already set. [ 35.362327] Extcon AUX1(HDMI) disable [ 35.389052] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 35.389492] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 35.389677] tegradc 15210000.nvdisplay: blank - powerdown [ 35.516195] tegradc 15200000.nvdisplay: blank - powerdown [ 35.516204] tegradc 15200000.nvdisplay: unblank [ 35.516704] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 35.516777] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 35.517823] Parent Clock set for DC plld2 [ 35.521049] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 35.541427] tegradc 15200000.nvdisplay: unblank [ 35.541435] tegradc 15210000.nvdisplay: blank - powerdown [ 38.469299] tegradc 15200000.nvdisplay: unblank [ 38.469308] tegradc 15210000.nvdisplay: blank - powerdown [ 40.866428] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)