Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Aug 13 2017, 15:25:34. Port /dev/ttyUSB0, 14:11:10 Press CTRL-A Z for help on special keys �� [0000.239] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.248] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.253] I> Boot-mode: Coldboot [0000.256] I> Chip revision : A02P [0000.259] I> Bootrom patch version : 15 (correctly patched) [0000.264] I> ATE fuse revision : 0x200 [0000.268] I> Ram repair fuse : 0x0 [0000.271] I> Ram Code : 0x2 [0000.274] I> rst_source : 0x0 [0000.276] I> rst_level : 0x0 [0000.280] I> Boot-device: eMMC [0000.295] I> sdmmc DDR50 mode [0000.299] W> No valid slot number is found in scratch register [0000.304] W> Return default slot: _a [0000.308] I> Active Boot chain : 0 [0000.311] I> Boot-device: eMMC [0000.314] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.322] I> Temperature = 19000 [0000.325] W> Skipping boost for clk: BPMP_CPU_NIC [0000.330] W> Skipping boost for clk: BPMP_APB [0000.334] W> Skipping boost for clk: AXI_CBB [0000.338] W> Skipping boost for clk: AON_CPU_NIC [0000.342] W> Skipping boost for clk: CAN1 [0000.345] W> Skipping boost for clk: CAN2 [0000.350] I> Boot-device: eMMC [0000.353] I> Boot-device: eMMC [0000.362] I> Sdmmc: HS400 mode enabled [0000.366] I> ECC region[0]: Start:0x0, End:0x0 [0000.371] I> ECC region[1]: Start:0x0, End:0x0 [0000.375] I> ECC region[2]: Start:0x0, End:0x0 [0000.379] I> ECC region[3]: Start:0x0, End:0x0 [0000.383] I> ECC region[4]: Start:0x0, End:0x0 [0000.387] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.393] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.397] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.402] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.406] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.412] E> FAILED: Thermal config [0000.419] E> FAILED: MEMIO rail config [0000.438] I> Boot-device: eMMC [0000.447] I> sdmmc bdev is already initialized [0000.521] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.529] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4beb) [0000.530] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.530] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.531] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.537] W> device prod register failed [0000.541] I> Boot-device: eMMC [0000.543] I> Boot_device: SDMMC_BOOT instance: 3 [0000.549] I> sdmmc-3 params source = boot args [0000.552] I> sdmmc bdev is already initialized [0000.556] I> sdmmc-3 params source = boot args [0000.563] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.570] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.572] W> No valid slot number is found in scratch register [0000.577] W> Return default slot: _a [0000.581] I> Active Boot chain : 0 [0000.584] I> parsing oem signed section of bpmp-fw header done [0000.590] I> bpmp-fw binary init read from storage [0000.595] I> oem authentication of bpmp-fw header done [0000.601] I> bpmp-fw binary done read from storage [0000.604] I> bpmp-fw: Authentication init Done [0000.610] I> parsing oem signed section of cpubl header done [0000.614] I> cpubl binary init read from storage [0000.618] I> bpmp-fw: Authentication Finalize Done [0000.623] I> oem authentication of cpubl header done [0000.628] I> cpubl binary done read from storage [0000.632] I> cpubl: Authentication init Done [0000.637] I> parsing oem signed section of rce header done [0000.642] I> rce binary init read from storage [0000.646] I> Relocating BR-BCT [0000.649] I> cpubl: Authentication Finalize Done [0000.653] I> oem authentication of rce header done [0000.658] I> rce binary done read from storage [0000.662] I> rce: Authentication init Done [0000.667] I> parsing oem signed section of ape header done [0000.671] I> ape binary init read from storage [0000.676] I> rce: Authentication Finalize Done [0000.680] I> oem authentication of ape header done [0000.685] I> ape binary done read from storage [0000.689] I> ape: Authentication init Done [0000.695] I> parsing oem signed section of tos header done [0000.698] I> tos binary init read from storage [0000.703] I> ape: Authentication Finalize Done [0000.707] I> oem authentication of tos header done [0000.711] I> tos binary done read from storage [0000.716] I> tos: Authentication init Done [0000.720] I> parsing oem signed section of bpmp-fw-dtb header done [0000.726] I> bpmp-fw-dtb binary init read from storage [0000.731] I> tos: Authentication Finalize Done [0000.737] I> oem authentication of bpmp-fw-dtb header done [0000.743] I> bpmp-fw-dtb binary done read from storage [0000.745] I> bpmp-fw-dtb: Authentication init Done [0000.750] I> parsing oem signed section of cpubl-dtb header done [0000.756] I> cpubl-dtb binary init read from storage [0000.761] I> bpmp-fw-dtb: Authentication Finalize Done [0000.798] I> oem authentication of cpubl-dtb header done [0000.799] I> cpubl-dtb binary done read from storage [0000.799] I> cpubl-dtb: Authentication init Done [0000.801] I> parsing oem signed section of eks header done [0000.802] I> eks binary init read from storage [0000.802] I> cpubl-dtb: Authentication Finalize Done [0000.803] I> oem authentication of eks header done [0000.807] I> eks binary done read from storage [0000.811] I> eks: Authentication init Done [0000.815] I> eks: Authentication Finalize Done [0000.819] I> EKB detected (length: 0x410) @ VA:0x5270a400 ��NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:52, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.323] I> Welcome to Cboot ��fmon_post initialized ��[0001.323] I> Cboot Version: t194-18fdfe28 [0001.324] I> CPU-BL Params @ 0xf2820000 [0001.324] I> 0) Base:0x00000000 Size:0x00000000 [0001.327] I> 1) Base:0xf1100000 Size:0x00100000 [0001.332] I> 2) Base:0xf2000000 Size:0x00200000 [0001.336] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.341] I> 4) Base:0xf1000000 Size:0x00100000 [0001.446] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.450] I> 6) Base:0xf3800000 Size:0x00400000 [0001.454] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.459] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.463] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.468] I> 10) Base:0xf3000000 Size:0x00800000 [0001.472] I> 11) Base:0x40000000 Size:0x00040000 [0001.477] I> 12) Base:0xf0c00000 Size:0x00100000��emc_debugfs initialized dvs_debugfs initialized �� ��fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.486] I> 13) Base:0x40046000 Size:0x00002000 [0001.536] I> 14) Base:0x40048000 Size:0x00002000 [0001.541] I> 15) Base:0xac000000 Size:0x00004000 [0001.545] I> 16) Base:0x4004a000 Size:0x00002000 [0001.550] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.554] I> 18) Base:0x4004c000 Size:0x00002000 [0001.559] I> 19) Base:0xf2200000 Size:0x00600000 [0001.563] I> 20) Base:0x4004e000 Size:0x00002000 [0001.568] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.572] I> 22) Base:0x00000000 Size:0x00000000 [0001.577] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.581] I> 24) Base:0xf6000000 Size:0x02000000 [0001.586] I> 25) Base:0x40050000 Size:0x00002000 [0001.590] I> 26) Base:0x40040000 Size:0x00006000 [0001.594] I> 27) Base:0xf1800000 Size:0x00400000 [0001.599] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.603] I> 29) Base:0xf1400000 Size:0x00400000 [0001.608] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.612] I> 31) Base:0x00000000 Size:0x00000000 [0001.617] I> 32) Base:0xf8000000 Size:0x08000000 [0001.621] I> 33) Base:0x00000000 Size:0x00000000 [0001.626] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.630] I> 35) Base:0xab000000 Size:0x01000000 [0001.635] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.639] I> 37) Base:0xf2800000 Size:0x00800000 [0001.644] I> 38) Base:0x80000000 Size:0x20000000 [0001.648] I> 39) Base:0xb0000000 Size:0x08000000 [0001.653] I> 40) Base:0x00000000 Size:0x00000000 [0001.657] I> 41) Base:0x00000000 Size:0x00000000 [0001.661] I> 42) Base:0x00000000 Size:0x00000000 [0001.666] I> 43) Base:0x00000000 Size:0x00000000 [0001.670] I> 44) Base:0x00000000 Size:0x00000000 [0001.675] I> 45) Base:0x00000000 Size:0x00000000 [0001.679] GIC-SPI Target CPU: 0 [0001.682] Interrupts Init done [0001.685] calling constructors [0001.688] initializing heap [0001.691] I> Heap: [0xa06905a8 ... 0xab000000] [0001.695] initializing threads [0001.698] initializing timers [0001.701] creating bootstrap completion thread [0001.705] top of bootstrap2() [0001.708] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.712] initializing platform [0001.715] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.721] W> device prod register failed [0001.725] I> Bl_dtb @0xaaf00000 [0001.731] W> "plugin-manager" doesn't exist, creating [0001.732] W> "ids" doesn't exist, creating [0001.737] W> "connection" doesn't exist, creating [0001.741] W> "configs" doesn't exist, creating [0001.750] I> Find /i2c@3160000's alias i2c0 [0001.751] I> Reading eeprom i2c=0 address=0x50 [0001.779] I> Device at /i2c@3160000:0x50 [0001.779] I> Reading eeprom i2c=0 address=0x56 [0001.780] E> I2C: slave not found in slaves. [0001.780] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0001.781] E> I2C_DEV: Failed to send register address 0x00000000. [0001.781] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.789] E> eeprom: Failed to read I2C slave device [0001.794] I> Eeprom read failed 0x3526070d [0001.800] I> Find /i2c@3180000's alias i2c2 [0001.802] I> Reading eeprom i2c=2 address=0x54 [0001.807] E> I2C: slave not found in slaves. [0001.810] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.818] E> I2C_DEV: Failed to send register address 0x00000000. [0001.823] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.833] E> eeprom: Failed to read I2C slave device [0001.838] I> Eeprom read failed 0x3526070d [0001.842] I> Reading eeprom i2c=2 address=0x57 [0001.846] E> I2C: slave not found in slaves. [0001.850] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.858] E> I2C_DEV: Failed to send register address 0x00000000. [0001.863] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.873] E> eeprom: Failed to read I2C slave device [0001.878] I> Eeprom read failed 0x3526070d [0001.882] I> Reading eeprom i2c=2 address=0x52 [0001.886] E> I2C: slave not found in slaves. [0001.890] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.898] E> I2C_DEV: Failed to send register address 0x00000000. [0001.904] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.913] E> eeprom: Failed to read I2C slave device [0001.918] I> Eeprom read failed 0x3526070d [0001.923] I> Find /i2c@c240000's alias i2c1 [0001.926] I> Reading eeprom i2c=1 address=0x52 [0001.931] E> I2C: slave not found in slaves. [0001.934] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.942] E> I2C_DEV: Failed to send register address 0x00000000. [0001.948] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.957] E> eeprom: Retry to read I2C slave device. [0001.962] E> I2C: slave not found in slaves. [0001.966] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.974] E> I2C_DEV: Failed to send register address 0x00000000. [0001.979] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.989] E> eeprom: Failed to read I2C slave device [0001.994] I> Eeprom read failed 0x3526070d [0001.998] I> Reading eeprom i2c=1 address=0x50 [0002.002] E> I2C: slave not found in slaves. [0002.006] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.014] E> I2C_DEV: Failed to send register address 0x00000000. [0002.020] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.029] E> eeprom: Retry to read I2C slave device. [0002.034] E> I2C: slave not found in slaves. [0002.038] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.046] E> I2C_DEV: Failed to send register address 0x00000000. [0002.051] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.061] E> eeprom: Failed to read I2C slave device [0002.066] I> Eeprom read failed 0x3526070d [0002.070] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.075] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.086] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0002.094] W> "i2c@3160000" doesn't exist, creating [0002.098] W> "module@0x50" doesn't exist, creating [0002.104] I> Adding plugin-manager/cvm [0002.106] W> "chip-id" doesn't exist, creating [0002.110] I> Adding plugin-manager/chip-id/A02P [0002.115] I> Plugin-manager override starting [0002.120] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.129] I> node /plugin-manager/fragement-soft-wdt matches [0002.139] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.144] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.152] I> Disable plugin-manager status in FDT [0002.152] I> Plugin-manager override finished successfully [0002.153] I> gpio framework initialized [0002.157] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.164] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.170] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.178] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.186] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.192] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.198] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.205] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.213] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.220] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.228] I> fixed regulator driver initialized [0002.238] I> register 'maxim' power off handle [0002.239] I> virtual i2c enabled [0002.239] I> registered 'maxim,max20024' pmic [0002.242] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.249] I> Boot-device: eMMC [0002.252] I> Boot_device: SDMMC_BOOT instance: 3 [0002.260] I> sdmmc-3 params source = boot args [0002.261] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.265] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.276] I> sdmmc bdev is already initialized [0002.281] I> sdmmc-3 params source = boot args [0002.311] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.324] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.334] I> enabling 'vdd-hdmi-5v0' regulator [0002.339] I> regulator 'vdd-hdmi-5v0' already enabled [0002.340] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.340] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.345] E> no regulator info present for avdd_hdmi-supply [0002.345] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.346] E> cannot find any other nvdisp nodes [0002.348] E> no valid display unit config found in dtb [0002.354] W> display init failed [0002.356] I> Load in CBoot Boot Options partition and parse it [0002.368] E> Error -9 when finding node with path /boot-configuration [0002.368] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.375] I> Hit any key to stop autoboot: 4 3 2 1 [0004.383] initializing target [0004.383] calling apps_init() [0004.384] starting app kernel_boot_app [0004.403] I> found decompressor handler: lz4-legacy [0004.404] I> decompressing BMP blob ... [0004.407] I> Kernel type = Normal [0004.408] I> Loading kernel-bootctrl from partition [0004.408] I> Loading partition kernel-bootctrl at 0xa42b0000 from device(0x1) [0004.415] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.415] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.416] I> ########## SD boot ########## [0004.420] I> No sdcard [0004.422] I> -0 params source = [0004.425] E> Blockdev open: exit error [0004.428] E> SD boot failed, err: 724238353 [0004.432] I> ########## USB boot ########## [0004.441] W> No valid slot number is found in scratch register [0004.442] W> Return default slot: _a [0004.458] I> USB Firmware Version: 60.06 release [0004.513] I> regulator of usb2-0 already enabled [0004.521] I> regulator of usb2-1 already enabled [0004.528] I> regulator of usb2-2 already enabled [0004.538] I> enabling 'vdd-5v-sata' regulator [0005.606] I> USB 2.0 port 4 new high-speed USB device detected [0005.607] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069b300, cmd_ring.dma = 0xa069b380 [0005.608] E> slot id is 1 [0005.609] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069b300, cmd_ring.dma = 0xa069b380 [0005.614] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa069b300, cmd_ring.dma = 0xa069b380 [0005.618] I> [0005.618] I> Enumerated USB Device 0424:2514 [0005.623] I> [0005.624] E> Enumerated device doesn't belong to MSD class or protocol is not bulk-only!! [0005.632] E> USBMSD: Failed to initialize Enumerated USB device either not an MSD device or supported protoco[0005.642] E> USBMSD: Failed to open usbmsd open, 0. [0005.646] E> Error opening USBMSD driver 0, err: 7c7c0312 [0005.652] E> Failed to initialize device 5-0 [0005.656] E> USB boot failed, err: 2088502034 [0005.660] I> ########## Fixed storage boot ########## [0005.665] I> Already published: 00010003 [0005.669] I> Look for boot partition [0005.672] I> Fallback: assuming 0th partition is boot partition [0005.678] I> Detect filesystem [0005.705] I> Loading extlinux.conf ... [0005.705] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.742] I> L4T boot options [0005.742] I> [1]: "primary kernel" [0005.742] I> Enter choice: [0008.744] I> Continuing with default option: 1 [0008.744] I> Loading kernel sig file from rootfs ... [0008.744] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.763] I> Loading kernel binary from rootfs ... [0008.763] I> rootfs path: /sdmmc_user/boot/Image [0009.004] I> Validate kernel ... [0009.004] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0009.326] I> No kernel-dtb binary path [0009.327] W> No valid slot number is found in scratch register [0009.327] W> Return default slot: _a [0009.327] I> A/B: bin_type (38) slot 0 [0009.328] I> Loading kernel-dtb from partition [0009.328] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0009.336] I> Validate kernel-dtb ... [0009.337] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0009.342] I> Loading ramdisk from rootfs ... [0009.343] I> rootfs path: /sdmmc_user/boot/initrd [0009.395] I> Kernel hdr @0xa42b0000 [0009.395] I> Kernel dtb @0x90000000 [0009.396] I> decompressor handler not found [0009.396] I> Copying kernel image (34527248 bytes) from 0xa42b0000 to 0x80080000 ... [0009.402] I> Done [0009.403] I> Updated bpmp info to DTB [0009.404] I> Ramdisk: Base: 0x92000000; Size: 0x54ecaf [0009.404] I> Updated initrd info to DTB [0009.404] W> WARN: Fail to override "console=none" in commandline [0009.408] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0009.415] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0009.423] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0009.430] W> No valid slot number is found in scratch register [0009.436] W> Return default slot: _a [0009.439] I> Active slot suffix: [0009.442] I> add_boot_slot_suffix: slot_suffix = [0009.447] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suff ix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0009.471] I> Updated bootarg info to DTB [0009.475] W> MAC addr invalid! [0009.478] E> Failed to get WIFI MAC address [0009.482] W> MAC addr invalid! [0009.485] E> Failed to get Bluetooth MAC address [0009.489] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:2f:e4:15 [0009.496] W> "plugin-manager" doesn't exist, creating [0009.501] I> Adding /chosen/plugin-manager/cvm [0009.505] W> "chip-id" doesn't exist, creating [0009.509] I> Adding /chosen/plugin-manager/chip-id [0009.514] W> "configs" doesn't exist, creating [0009.518] I> Adding /chosen/plugin-manager/configs [0009.522] W> "ids" doesn't exist, creating [0009.526] I> Adding /chosen/plugin-manager/ids [0009.531] W> "odm-data" doesn't exist, creating [0009.535] I> Adding /chosen/plugin-manager/odm-data [0009.543] W> "memory" doesn't exist, creating [0009.544] I> [0] START: 0x80000000, END: 0xac000000 [0009.549] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.553] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.558] I> dram_block larger than 80000000 [0009.562] I> [3] START: 0x100000000, END: 0x880000000 [0009.567] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.573] I> added [base:0xac200000, size:0x44600000] to /memory [0009.579] I> added [base:0x100000000, size:0x780000000] to /memory [0009.586] I> Updated memory info to DTB [0009.589] E> add_disp_param: failed to get display params for du=0 [0009.595] W> "reset" doesn't exist, creating [0009.599] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.603] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.608] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.613] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.618] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.622] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.627] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0009.632] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0009.638] W> "misc-data" doesn't exist, creating [0009.641] I> Boot-device: eMMC [0009.644] I> Add boot-sdmmc to plugin-manager/misc-data [0009.649] I> Add storage-sdmmc to plugin-manager/misc-data [0009.654] W> Unknown storage device [0009.658] I> Add serial number:1424920016467 as DT property [0009.664] I> Plugin-manager override starting [0009.668] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.675] I> node /plugin-manager/fragement-soft-wdt matches [0009.682] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.686] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0009.697] I> Disable plugin-manager status in FDT [0009.697] I> Plugin-manager override finished successfully [0009.701] I> tegrabl_load_kernel_and_dtb: Done [0009.705] E> tegrabl_display_clear: display is not initialized [0009.710] W> Boot logo display failed... [0009.714] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (hm@hm) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #1 SMP PREEMPT Mon May 10 12:56:13 IST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 7.285596] tegra-xudc-new 3550000.xudc: extcon_get_extcon_dev_by_cable failed -19 [ 7.555092] sgtl5000 7-000a: Error reading chip id -121 [ 7.653366] tegra-asoc: sound: ASoC: CODEC DAI sgtl5000 not registered [ 7.653554] tegra-asoc: sound: snd_soc_register_card failed (-517)