[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (nvidia@nvidia-desktop) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Jul 14 14:52:38 KST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb4000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29188(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3560384K/4159488K available (15294K kernel code, 2942K rwdata, 6740K rodata, 8576K init, 609K bss, 123968K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009610000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e70000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a14f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a14f808 - 0xffffff800a1e7cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001619] Console: colour dummy device 80x25 [ 0.001630] console [tty0] enabled [ 0.001637] bootconsole [uart8250] disabled [ 0.001654] kmemleak: Kernel memory leak detector disabled [ 0.001675] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001689] pid_max: default: 32768 minimum: 301 [ 0.002141] Security Framework initialized [ 0.002359] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002366] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003534] ftrace: allocating 47208 entries in 185 pages [ 0.173489] sched-energy: CPU device node has no sched-energy-costs [ 0.173523] ASID allocator initialised with 65536 entries [ 0.211800] tegra-id: chipid=22117. [ 0.211813] tegra-id: opt_subrevision=0. [ 0.211831] Tegra Speedo/IDDQ fuse revision 4 [ 0.211836] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211841] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.211847] Tegra: CPU Speedo Value 2022, SoC Speedo Value 1912, GPU Speedo Value 2016 [ 0.211851] Tegra: CPU IDDQ Value 1924, SoC IDDQ Value 2028, GPU IDDQ Value 2585 [ 0.211870] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.211888] DTS File Name: /home/nvidia/work/L4T-32-NANO/dual_csi_withoutHub_20210712/public_release/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.211895] DTB Build time: Jul 14 2021 15:56:05 [ 0.261097] CPU1: Booted secondary processor [411fd071] [ 0.293000] CPU2: Booted secondary processor [411fd071] [ 0.324966] CPU3: Booted secondary processor [411fd071] [ 0.325069] Brought up 4 CPUs [ 0.325076] SMP: Total of 4 processors activated. [ 0.325085] CPU features: detected feature: 32-bit EL0 Support [ 0.325355] CPU: All CPU(s) started at EL2 [ 0.325372] alternatives: patching kernel code [ 0.333885] devtmpfs: initialized [ 0.372208] Initilizing CustomIPI irq domain [ 0.372650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372675] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384202] pinctrl core: initialized pinctrl subsystem [ 0.384847] OS set in device tree is not L4T. [ 0.385332] regulator-dummy: no parameters [ 0.385631] Initializing plugin-manager [ 0.385792] Plugin module not found [ 0.389306] NET: Registered protocol family 16 [ 0.390727] pstore: using zlib compression [ 0.390769] console [pstore-1] enabled [ 0.390773] pstore: Registered ramoops as persistent store backend [ 0.390778] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.401127] cpuidle: using governor menu [ 0.405049] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.406842] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e74000) [ 0.406865] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.409685] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.412010] Serial: AMBA PL011 UART driver [ 0.412541] tegra_powergate_init: DONE [ 0.412556] DTS File Name: /home/nvidia/work/L4T-32-NANO/dual_csi_withoutHub_20210712/public_release/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.412562] DTB Build time: Jul 14 2021 15:56:05 [ 0.414500] Tegra reboot handler registered. [ 0.419076] iommu: Adding device tegra-carveouts to group 0 [ 0.419221] platform tegra-carveouts: domain=ffffffc0f9b6e3d8 allocates as[0]=ffffffc0f94400a8 [ 0.419613] iommu: Adding device smmu_test to group 1 [ 0.419661] platform smmu_test: domain=ffffffc0f9b6e618 allocates as[0]=ffffffc0f9440110 [ 0.420471] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.420524] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.420581] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.420590] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.420613] mc-err: mcerr ops are set to t21x [ 0.431411] iommu: Adding device 70090000.xusb to group 2 [ 0.431710] iommu: Adding device 70006000.serial to group 3 [ 0.431789] platform 70006000.serial: domain=ffffffc0f94ca6d8 allocates as[0]=ffffffc0f9440178 [ 0.432200] iommu: Adding device 70006040.serial to group 4 [ 0.432476] iommu: Adding device 70006200.serial to group 5 [ 0.432693] iommu: Adding device sound to group 6 [ 0.432745] platform sound: domain=ffffffc0f94cac18 allocates as[0]=ffffffc0f94401e0 [ 0.433358] iommu: Adding device 7000d400.spi to group 7 [ 0.433624] iommu: Adding device 7000d600.spi to group 8 [ 0.433959] iommu: Adding device 50000000.host1x to group 9 [ 0.434237] iommu: Adding device 54080000.vi to group 10 [ 0.434624] iommu: Adding device 54600000.isp to group 11 [ 0.434883] iommu: Adding device 54680000.isp to group 12 [ 0.435161] iommu: Adding device tegradc.0 to group 13 [ 0.435237] platform tegradc.0: domain=ffffffc0f94d79d8 allocates as[0]=ffffffc0f9440248 [ 0.439536] platform tegradc.0: IOVA linear map 0x0000000092cb4000(800000) [ 0.439927] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.440287] iommu: Adding device tegradc.1 to group 14 [ 0.440339] platform tegradc.1: domain=ffffffc0f94d7c18 allocates as[0]=ffffffc0f94402b0 [ 0.444510] platform tegradc.1: IOVA linear map 0x0000000092cb4000(800000) [ 0.444899] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.445174] iommu: Adding device 54340000.vic to group 15 [ 0.445382] iommu: Adding device 544c0000.nvenc to group 16 [ 0.445576] iommu: Adding device 54500000.tsec to group 17 [ 0.445786] iommu: Adding device 54100000.tsecb to group 18 [ 0.445993] iommu: Adding device 54480000.nvdec to group 19 [ 0.446183] iommu: Adding device 54380000.nvjpg to group 20 [ 0.447258] iommu: Adding device 546c0000.i2c to group 21 [ 0.447597] iommu: Adding device 57000000.gpu to group 22 [ 0.447649] platform 57000000.gpu: domain=ffffffc0f94e5c18 allocates as[0]=ffffffc0f9440318 [ 0.447684] platform 57000000.gpu: domain=ffffffc0f94e5c18 allocates as[1]=ffffffc0f9440380 [ 0.447726] platform 57000000.gpu: domain=ffffffc0f94e5c18 allocates as[2]=ffffffc0f94403e8 [ 0.447765] platform 57000000.gpu: domain=ffffffc0f94e5c18 allocates as[3]=ffffffc0f9440450 [ 0.448684] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.448695] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.448707] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.448712] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.448715] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.501170] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.501181] tegra-pmc: Clear bootloader IO dpd settings [ 0.501201] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.501267] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.501569] iommu: Adding device 70012000.se to group 23 [ 0.502430] iommu: Adding device 7000c000.i2c to group 24 [ 0.502752] iommu: Adding device 7000c400.i2c to group 25 [ 0.503065] iommu: Adding device 7000c500.i2c to group 26 [ 0.503330] iommu: Adding device 7000c700.i2c to group 27 [ 0.503642] iommu: Adding device 7000d000.i2c to group 28 [ 0.503985] iommu: Adding device 7000d100.i2c to group 29 [ 0.504308] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.504369] platform sdhci-tegra.3: domain=ffffffc0f950fe58 allocates as[0]=ffffffc0f94404b8 [ 0.505309] iommu: Adding device 700d0000.xudc to group 31 [ 0.509104] vdd-ac-bat: 5000 mV [ 0.509462] vdd-5v0-sys: 5000 mV [ 0.510600] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.510669] vdd-5v0-hdmi: 5000 mV [ 0.511135] vdd-1v8-sys: 1800 mV [ 0.511573] vdd-fan: supplied by vdd-5v0-sys [ 0.511605] vdd-fan: 5000 mV [ 0.511999] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.512058] vdd-usb-vbus: 5000 mV [ 0.512596] vdd-usb-vbus2: 5000 mV [ 0.546143] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.548610] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.549765] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.549807] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.550142] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.558226] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.558586] SCSI subsystem initialized [ 0.558835] libata version 3.00 loaded. [ 0.559109] usbcore: registered new interface driver usbfs [ 0.559158] usbcore: registered new interface driver hub [ 0.559234] usbcore: registered new device driver usb [ 0.563302] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.568347] vdd-core: 1000 <--> 1162 mV at 1125 mV [ 0.569193] random: fast init done [ 0.569323] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.572236] vdd-ddr-1v1: 1150 mV [ 0.576325] vdd-pre-reg-1v35: 1350 mV [ 0.580231] vdd-1v8: 1800 mV [ 0.584235] avdd-sys-1v2: 1200 mV [ 0.588234] vdd-pex-1v0: 1050 mV [ 0.588918] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.589473] max77620-ldo3: at 3100 mV [ 0.592242] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.592804] max77620-ldo5: at 3100 mV [ 0.596235] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.600241] avdd-1v05-pll: 1050 mV [ 0.604234] avdd-io-hdmi-dp: 1050 mV [ 0.606721] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.607022] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.607323] max77620 4-003c: max77620 probe successful [ 0.610181] media: Linux media interface: v0.10 [ 0.610242] Linux video capture interface: v2.00 [ 0.611194] pps_core: LinuxPPS API ver. 1 registered [ 0.611203] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.611224] PTP clock support registered [ 0.614464] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.615381] Advanced Linux Sound Architecture Driver Initialized. [ 0.616044] Bluetooth: Core ver 2.22 [ 0.616097] NET: Registered protocol family 31 [ 0.616102] Bluetooth: HCI device and connection manager initialized [ 0.616116] Bluetooth: HCI socket layer initialized [ 0.616124] Bluetooth: L2CAP socket layer initialized [ 0.616152] Bluetooth: SCO socket layer initialized [ 0.617983] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.618000] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.618049] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.618063] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.621371] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.622639] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.622729] vdd-3v3-sys: 3300 mV [ 0.623002] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.624337] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.624795] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.624829] vdd-3v3-sd: 3300 mV [ 0.625766] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.625812] avdd-io-edp-1v05: 1050 mV [ 0.626257] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.626301] vdd-usb-hub-en: 5000 mV [ 0.627763] camchar: rtcpu character device driver loaded [ 0.628557] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.630054] clocksource: Switched to clocksource arch_sys_counter [ 0.671351] VFS: Disk quotas dquot_6.6.0 [ 0.671486] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.671973] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.672429] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.672450] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.672656] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.672661] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.672672] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.672699] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.672705] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.672717] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.672726] nvmap_page_pool_init: Total RAM pages: 1008880 [ 0.672731] nvmap_page_pool_init: nvmap page pool size: 126110 pages (492 MB) [ 0.672826] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.673333] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.674436] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.682925] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.683369] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.683737] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.684008] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.684187] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.684483] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.684488] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.684933] NET: Registered protocol family 2 [ 0.685921] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.686170] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.686713] TCP: Hash tables configured (established 32768 bind 32768) [ 0.686876] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.686958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.687373] NET: Registered protocol family 1 [ 0.688246] RPC: Registered named UNIX socket transport module. [ 0.688252] RPC: Registered udp transport module. [ 0.688255] RPC: Registered tcp transport module. [ 0.688260] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.688275] PCI: CLS 0 bytes, default 64 [ 0.688522] Trying to unpack rootfs image as initramfs... [ 0.993952] Freeing initrd memory: 6992K [ 1.004053] host1x 50000000.host1x: initialized [ 1.006010] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.009323] audit: initializing netlink subsys (disabled) [ 1.009398] audit: type=2000 audit(0.855:1): initialized [ 1.010220] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.020297] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.021782] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.022761] 9p: Installing v9fs 9p2000 file system support [ 1.026028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.026223] io scheduler noop registered [ 1.026532] io scheduler cfq registered (default) [ 1.029229] gic 702f9000.agic: GIC IRQ controller registered [ 1.032327] iommu: Adding device 702ef000.adsp to group 32 [ 1.041456] iommu: Adding device aconnect@702c0000:adsp_audio to group 33 [ 1.041605] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.042228] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x89e7c10 [ 1.042237] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.043922] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.044031] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.044129] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.044332] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.044421] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.044512] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.044597] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.044689] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.044782] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.044874] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.051094] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.052718] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.054720] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.056000] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.056358] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.057586] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.057823] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 1.058250] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.058318] Adding domain tsec-pd to PM domain host1x-pd [ 1.061414] tsec 54500000.tsec: initialized [ 1.062839] tsec 54100000.tsecb: initialized [ 1.063553] Adding domain nvdec-pd to PM domain host1x-pd [ 1.066845] nvdec 54480000.nvdec: initialized [ 1.067905] Adding domain vic03-pd to PM domain host1x-pd [ 1.068087] Adding domain msenc-pd to PM domain host1x-pd [ 1.068246] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.072090] falcon 54340000.vic: initialized [ 1.073352] falcon 544c0000.nvenc: initialized [ 1.074698] falcon 54380000.nvjpg: initialized [ 1.079087] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96 [ 1.079136] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.079166] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.079184] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.079282] display board info: id 0x0, fab 0x0 [ 1.079338] generic_infoframe_type: 0x87 [ 1.079463] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.079468] tegra_cec 70015000.tegra_cec: probed [ 1.079490] tegradc tegradc.0: DT parsed successfully [ 1.079544] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.080150] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 1.083407] tegradc tegradc.0: probed [ 1.089614] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.096505] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.097420] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.097428] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.097794] kfuse 7000fc00.kfuse: initialized [ 1.099386] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.100409] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.101829] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.101846] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.102446] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.104067] vdd-gpu: applied init 1000000uV constraint [ 1.104077] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.104536] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.109963] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.110143] No Device Node present for smmu client: serial8250 !! [ 1.110153] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.110205] iommu: Adding device serial8250 to group 34 [ 1.112580] console [ttyS0] disabled [ 1.112687] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.112786] console [ttyS0] enabled [ 1.113691] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.113991] serial-tegra 70006200.serial: RX in PIO mode [ 1.114155] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.115494] [drm] Initialized [ 1.115884] Console: switching to colour frame buffer device 240x67 [ 1.116011] tegradc tegradc.0: fb registered [ 1.123654] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 1.123712] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 1.124249] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 1.124262] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 1.126932] brd: module loaded [ 1.132472] loop: module loaded [ 1.132601] tegra_profiler: version: 1.143, samples/io: 48/28 [ 1.132723] tegra_profiler: auth: init [ 1.134243] THERMAL EST: found 2 subdevs [ 1.134253] THERMAL EST num_resources: 0 [ 1.134261] [THERMAL EST subdev 0] [ 1.134269] [THERMAL EST subdev 1] [ 1.134739] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.134743] THERMAL EST: thz register success. [ 1.134911] THERMAL EST: end of probe, return err: 0 [ 1.136182] sd: No Scsi addr parsed to reserve index [ 1.136218] hisi_sas: driver version v1.6 [ 1.143107] libphy: Fixed MDIO Bus: probed [ 1.143939] tun: Universal TUN/TAP device driver, 1.6 [ 1.143947] tun: (C) 1999-2004 Max Krasnyansky [ 1.144988] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.144995] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.145044] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.145049] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.145096] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.145100] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.145147] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.145151] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.146443] PPP generic driver version 2.4.2 [ 1.146697] PPP BSD Compression module registered [ 1.146704] PPP Deflate Compression module registered [ 1.146749] PPP MPPE Compression module registered [ 1.146757] NET: Registered protocol family 24 [ 1.146835] usbcore: registered new interface driver r8152 [ 1.146882] usbcore: registered new interface driver asix [ 1.146938] usbcore: registered new interface driver ax88179_178a [ 1.146987] usbcore: registered new interface driver cdc_ether [ 1.147027] usbcore: registered new interface driver net1080 [ 1.147066] usbcore: registered new interface driver cdc_subset [ 1.147102] usbcore: registered new interface driver zaurus [ 1.147156] usbcore: registered new interface driver cdc_ncm [ 1.147340] VFIO - User Level meta-driver version: 0.3 [ 1.148623] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.148646] ehci-pci: EHCI PCI platform driver [ 1.148697] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.148734] ohci-pci: OHCI PCI platform driver [ 1.148784] ohci-platform: OHCI generic platform driver [ 1.151022] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.151033] Extcon AUX1(HDMI) enable [ 1.151968] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.152139] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.152220] tegradc tegradc.1: No lt-data, using default setting [ 1.152248] tegradc tegradc.1: No hpd-gpio in DT [ 1.152282] tegradc tegradc.1: DT parsed successfully [ 1.152337] tegradc tegradc.1: Display dc.ffffff800d500000 registered with id=1 [ 1.152654] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.153664] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.154238] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f97e6400 id [ 1.155578] usbcore: registered new interface driver uas [ 1.155645] usbcore: registered new interface driver usb-storage [ 1.155783] usbcore: registered new interface driver usbserial [ 1.160170] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.161763] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.161830] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.161861] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.162655] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.162708] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.162720] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.162724] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.162739] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.162776] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.162805] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.163038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.163045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.163050] usb usb1: Product: xHCI Host Controller [ 1.163055] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.163059] usb usb1: SerialNumber: 70090000.xusb [ 1.163838] mousedev: PS/2 mouse device common for all mice [ 1.163950] usbcore: registered new interface driver xpad [ 1.163976] hub 1-0:1.0: USB hub found [ 1.164162] hub 1-0:1.0: 5 ports detected [ 1.164954] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.164956] tegradc tegradc.1: probed [ 1.164971] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.165090] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.165211] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.165219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.165223] usb usb2: Product: xHCI Host Controller [ 1.165228] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.165233] usb usb2: SerialNumber: 70090000.xusb [ 1.165360] tegradc tegradc.1: fb registered [ 1.168599] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.168605] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.168614] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.168630] tegradc tegradc.1: blank - powerdown [ 1.168652] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.168657] Extcon DP: HPD disabled [ 1.168662] hpd: hpd_switch 0 [ 1.168666] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.168675] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.168683] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.195115] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 1.195392] hub 2-0:1.0: USB hub found [ 1.195430] hub 2-0:1.0: 4 ports detected [ 1.199173] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.199180] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.266113] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.280666] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.282821] rtc rtc1: alarm rtc device [ 1.282834] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.282851] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.283218] i2c /dev entries driver [ 1.284715] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.285550] tegradc tegradc.0: blank - powerdown [ 1.310145] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.312045] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.312051] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.312356] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.312369] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.312376] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.312502] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.312512] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.312518] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.312664] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.312673] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.312677] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.312854] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.313418] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.313465] tegra_aotag tegra-aotag: Invalid temp readout [ 1.313485] tegra_aotag tegra-aotag: Invalid temp readout [ 1.313501] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.313509] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.314412] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.314427] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.314615] tegra_aotag tegra-aotag: Invalid temp readout [ 1.314637] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.315056] parse_throttle_dt_data: Num cap clks = 6 [ 1.315060] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.315067] parse_throttle_dt_data: clk=gpu type=4 [ 1.315086] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.315106] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.315128] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.315131] parse_throttle_dt_data: clk=emc type=3 [ 1.315498] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.315621] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.315766] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.316433] FAN dev name: pwm-fan [ 1.316479] FAN:gpio request success. [ 1.316530] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.316763] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.316887] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.316894] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.316972] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.316977] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.316981] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.316985] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.316988] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.316992] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.316996] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.316999] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.317003] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.317007] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.318095] softdog-platform soft_watchdog: Software Watchdog Timer: initialized [ 1.318676] device-mapper: uevent: version 1.0.3 [ 1.319139] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.321806] tegra210-cpufreq cpufreq: probe()...completed [ 1.322540] sdhci: Secure Digital Host Controller Interface driver [ 1.322541] sdhci: Copyright(c) Pierre Ossman [ 1.322543] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.322892] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.328926] tegra-se 70012000.se: tegra_se_probe: complete [ 1.329411] hidraw: raw HID events driver (C) Jiri Kosina [ 1.330559] usbcore: registered new interface driver usbhid [ 1.330561] usbhid: USB HID core driver [ 1.332585] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 1.332587] Extcon AUX1(HDMI) disable [ 1.332793] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.332956] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.334875] nvpmodel: initialized successfully [ 1.335976] usbcore: registered new interface driver snd-usb-audio [ 1.336032] No Device Node present for smmu client: snd-soc-dummy !! [ 1.336036] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.336055] iommu: Adding device snd-soc-dummy to group 35 [ 1.350354] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.358348] OPE platform probe [ 1.358441] OPE platform probe successful [ 1.358697] OPE platform probe [ 1.358778] OPE platform probe successful [ 1.366136] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.382381] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.382523] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.382655] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.382781] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.382911] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.383042] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.383169] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.383299] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.383429] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.383556] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.395172] u32 classifier [ 1.395174] Actions configured [ 1.395246] Initializing XFRM netlink socket [ 1.395954] NET: Registered protocol family 10 [ 1.396671] NET: Registered protocol family 17 [ 1.396684] NET: Registered protocol family 15 [ 1.396755] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.396800] Bluetooth: RFCOMM socket layer initialized [ 1.396809] Bluetooth: RFCOMM ver 1.11 [ 1.396814] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.396818] Bluetooth: HIDP socket layer initialized [ 1.396835] 9pnet: Installing 9P2000 support [ 1.396870] Key type dns_resolver registered [ 1.397293] Registered cp15_barrier emulation handler [ 1.397298] Registered setend emulation handler [ 1.398379] registered taskstats version 1 [ 1.398913] Adding domain ve2-pd to PM domain host1x-pd [ 1.399163] Adding domain ve-pd to PM domain host1x-pd [ 1.401211] isp 54600000.isp: initialized [ 1.402226] isp 54680000.isp: initialized [ 1.412630] last reset is due to software reset [ 1.412633] KERNEL: PMC reset status reg: 0x3 [ 1.412698] BL: PMC reset status reg: 0x3 [ 1.412700] BL: PMIC poweroff Event Recorder: 0x0 [ 1.413603] tegradc tegradc.0: unblank [ 1.414251] clk_cbus_recalc_rate: no gbus parent [ 1.414256] clk_cbus_round_rate: no gbus parent [ 1.414257] clk_cbus_round_rate: no gbus parent [ 1.414261] clk_cbus_recalc_rate: no gbus parent [ 1.414356] clk_cbus_recalc_rate: no gbus parent [ 1.414358] clk_cbus_round_rate: no gbus parent [ 1.414360] clk_cbus_round_rate: no gbus parent [ 1.414362] clk_cbus_recalc_rate: no gbus parent [ 1.415036] tegra_dvfs: GPU-cap: registered [ 1.415092] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.415094] tegra dvfs: vdd-core: nominal 1125mV, offset 1000000uV, step 12500uV, scaling enabled [ 1.415096] tegra dvfs: vdd-gpu: nominal 1078mV, offset 708000uV, step 10000uV, scaling enabled [ 1.416524] tegra_dvfs: vdd-gpu-vts: registered [ 1.417050] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.417485] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.417743] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.418258] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.418659] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.418816] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.418930] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.419042] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.421294] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.450821] tegra_rtc 7000e000.rtc: setting system clock to 2021-07-14 08:06:34 UTC (1626249994) [ 1.451793] vi 54080000.vi: vi_probe: ++ [ 1.453249] tegradc tegradc.0: nominal-pclk:297000000 parent:297000000 div:1.0 pclk:297000000 294030000~323730000 [ 1.453312] tegradc tegradc.0: hdmi: tmds rate:297000K prod-setting:prod_c_hdmi_150m_300m [ 1.454608] vi 54080000.vi: initialized [ 1.455442] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 1.456588] vi 54080000.vi: subdev nvcsi--1 bound [ 1.456600] vi 54080000.vi: subdev imx219 6-0010 bound [ 1.457464] mmcblk mmc0:0001: Card claimed for testing. [ 1.458789] Disable partitions left on by BL [ 1.458791] disb [ 1.458839] bwmgr: missing cdev-type property [ 1.458965] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.458971] DRAM derating cdev registered. [ 1.459871] ALSA device list: [ 1.459874] #0: tegra-hda at 0x70038000 irq 82 [ 1.459875] #1: tegra-snd-t210ref-mobile-rt565x [ 1.484579] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.490283] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 1.490285] Extcon AUX1(HDMI) enable [ 1.494069] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.522414] tegradc tegradc.0: sync windows ret = 242 [ 1.527955] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.527958] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.527961] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.527963] usb 1-2: Manufacturer: Generic [ 1.528838] hub 1-2:1.0: USB hub found [ 1.529402] hub 1-2:1.0: 4 ports detected [ 1.586084] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 1.586086] Extcon HDMI: HPD enabled [ 1.586097] tegradc tegradc.0: hdmi: plugged [ 1.589199] Freeing unused kernel memory: 8576K [ 1.613797] Root device found: mmcblk0p1 [ 1.615266] Found dev node: /dev/mmcblk0p1 [ 1.634953] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.636754] Rootfs mounted over mmcblk0p1 [ 1.638522] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 1.649945] Switching from initrd to actual rootfs [ 1.666905] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 1.666910] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.666913] usb 2-1: Product: 4-Port USB 3.1 Hub [ 1.666916] usb 2-1: Manufacturer: Generic [ 1.670326] hub 2-1:1.0: USB hub found [ 1.671151] hub 2-1:1.0: 4 ports detected [ 1.753159] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.764566] cgroup: cgroup2: unknown option "nsdelegate" [ 1.779093] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.779864] systemd[1]: Detected architecture arm64. [ 1.802273] systemd[1]: No hostname configured. [ 1.802287] systemd[1]: Set hostname to . [ 1.818077] usb 1-2.3: new full-speed USB device number 3 using tegra-xusb [ 1.822087] usb 2-1: usb_suspend_both: status 0 [ 1.822311] usb usb2: usb_suspend_both: status 0 [ 1.841657] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c534 [ 1.841662] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.841666] usb 1-2.3: Product: USB Receiver [ 1.841669] usb 1-2.3: Manufacturer: Logitech [ 1.844396] input: Logitech USB Receiver as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C534.0001/input/input2 [ 1.878088] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.878098] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.894069] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.902701] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-70090000.xusb-2.3/input0 [ 1.905847] input: Logitech USB Receiver as /devices/70090000.xusb/usb1/1-2/1-2.3/1-2.3:1.1/0003:046D:C534.0002/input/input3 [ 1.962383] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-70090000.xusb-2.3/input1 [ 1.980945] random: systemd: uninitialized urandom read (16 bytes read) [ 1.980976] systemd[1]: Reached target User and Group Name Lookups. [ 1.981330] random: systemd: uninitialized urandom read (16 bytes read) [ 1.983155] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.983192] random: systemd: uninitialized urandom read (16 bytes read) [ 1.983313] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.984859] systemd[1]: Created slice User and Session Slice. [ 2.016485] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.102193] tegra_cec 70015000.tegra_cec: physical address: 10:00. [ 2.166716] tegra_cec 70015000.tegra_cec: Sent res: -113. [ 2.166722] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.232352] systemd-journald[2006]: Received request to flush runtime journal from PID 1 [ 2.300244] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.302212] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.408526] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.408534] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.408538] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.408542] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.408546] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.408569] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.408635] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.408806] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.408929] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.408954] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.408983] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.409004] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.409134] pci 0000:01:00.0: supports D1 D2 [ 2.409138] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.418118] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.418222] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.418227] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.418234] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.418252] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.418268] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.418276] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.418280] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.418287] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.418602] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.418606] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.418612] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.418708] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.418889] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.418906] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.440946] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.441019] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e9:eb:6d from device tree [ 2.441502] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.441518] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.637643] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.643875] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.643896] cpu-throttle-alert cooling device registered. [ 2.644023] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.644037] gpu-throttle-alert cooling device registered. [ 2.644199] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.644211] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.644225] hot-surface-alert cooling device registered. [ 3.111418] using random self ethernet address [ 3.150878] using random host ethernet address [ 3.468337] random: crng init done [ 3.471769] random: 7 urandom warning(s) missed due to ratelimiting [ 3.699834] Mass Storage Function, version: 2009/09/11 [ 3.699841] LUN: removable file: (no medium) [ 3.711800] using random self ethernet address [ 3.741536] using random host ethernet address [ 3.858215] rndis0: HOST MAC 6a:a4:f7:c8:22:54 [ 3.858406] rndis0: MAC 6a:a4:f7:c8:22:55 [ 3.860953] usb0: HOST MAC 6a:a4:f7:c8:22:56 [ 3.860985] usb0: MAC 6a:a4:f7:c8:22:57 [ 3.861015] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.873600] l4tbr0: port 1(rndis0) entered blocking state [ 3.873604] l4tbr0: port 1(rndis0) entered disabled state [ 3.873765] device rndis0 entered promiscuous mode [ 3.883471] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.887882] l4tbr0: port 2(usb0) entered blocking state [ 3.887886] l4tbr0: port 2(usb0) entered disabled state [ 3.888061] device usb0 entered promiscuous mode [ 3.897529] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.116991] zram: Added device: zram0 [ 4.117550] zram: Added device: zram1 [ 4.120848] zram: Added device: zram2 [ 4.124851] zram: Added device: zram3 [ 4.156596] android_work: did not send uevent (0 0 (null)) [ 4.167233] zram0: detected capacity change from 0 to 518541312 [ 4.218986] Adding 506384k swap on /dev/zram0. Priority:5 extents:1 across:506384k SS [ 4.223833] zram1: detected capacity change from 0 to 518541312 [ 4.229764] android_work: sent uevent USB_STATE=CONNECTED [ 4.246121] Adding 506384k swap on /dev/zram1. Priority:5 extents:1 across:506384k SS [ 4.250880] zram2: detected capacity change from 0 to 518541312 [ 4.273144] Adding 506384k swap on /dev/zram2. Priority:5 extents:1 across:506384k SS [ 4.276899] zram3: detected capacity change from 0 to 518541312 [ 4.284762] android_work: sent uevent USB_STATE=DISCONNECTED [ 4.325286] Adding 506384k swap on /dev/zram3. Priority:5 extents:1 across:506384k SS [ 4.377680] android_work: sent uevent USB_STATE=CONNECTED [ 4.380644] configfs-gadget gadget: high-speed config #1: c [ 4.380678] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 4.380694] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 4.380710] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 4.380804] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled [ 4.380821] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled [ 4.380836] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled [ 4.380872] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled [ 4.380890] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled [ 4.380911] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled [ 4.380952] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 4.381255] android_work: sent uevent USB_STATE=CONFIGURED [ 4.383656] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.383674] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.383919] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 4.384602] tegra-xudc-new 700d0000.xudc: ep 13 disabled [ 4.384691] tegra-xudc-new 700d0000.xudc: ep 8 disabled [ 4.401785] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 4.401803] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 5.056475] tegradc tegradc.0: blank - powerdown [ 5.155691] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 5.155693] Extcon AUX1(HDMI) disable [ 5.195222] tegradc tegradc.0: unblank [ 5.231629] tegradc tegradc.0: nominal-pclk:297000000 parent:297000000 div:1.0 pclk:297000000 294030000~323730000 [ 5.231705] tegradc tegradc.0: hdmi: tmds rate:297000K prod-setting:prod_c_hdmi_150m_300m [ 5.233850] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 5.268606] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 5.268609] Extcon AUX1(HDMI) enable [ 5.300718] tegradc tegradc.0: sync windows ret = 242 [ 5.378952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.380063] eth0: 0xffffff800d54c000, 00:04:4b:e9:eb:6d, IRQ 406 [ 5.462921] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.220210] tegradc tegradc.0: unblank [ 6.220221] tegradc tegradc.1: blank - powerdown [ 6.798385] fuse init (API version 7.26) [ 8.534562] r8168: eth0: link up [ 8.534615] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.568774] l4tbr0: port 2(usb0) entered blocking state [ 9.568779] l4tbr0: port 2(usb0) entered forwarding state [ 9.568845] l4tbr0: port 1(rndis0) entered blocking state [ 9.568850] l4tbr0: port 1(rndis0) entered forwarding state [ 9.570215] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 9.570237] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 15.159085] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.159096] Bluetooth: BNEP socket layer initialized [ 31.864578] vdd-fan: disabling [ 31.864620] vdd-usb-vbus: disabling [ 31.864653] vdd-usb-vbus2: disabling [ 31.864732] vddio-sdmmc-ap: disabling [ 31.865391] vddio-sdmmc3-ap: disabling [ 31.865957] vdd-3v3-sd: disabling [ 31.865997] avdd-io-edp-1v05: disabling [ 31.866028] vdd-usb-hub-en: disabling [ 48.069697] tegradc tegradc.0: blank - powerdown [ 48.200756] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 48.200759] Extcon AUX1(HDMI) disable [ 48.237972] tegradc tegradc.1: blank - powerdown [ 48.403105] tegradc tegradc.0: blank - powerdown [ 48.403117] tegradc tegradc.0: unblank [ 48.439240] tegradc tegradc.0: nominal-pclk:297000000 parent:297000000 div:1.0 pclk:297000000 294030000~323730000 [ 48.439329] tegradc tegradc.0: hdmi: tmds rate:297000K prod-setting:prod_c_hdmi_150m_300m [ 48.440351] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 48.475416] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 48.475419] Extcon AUX1(HDMI) enable [ 48.496198] tegradc tegradc.0: unblank [ 48.496207] tegradc tegradc.1: blank - powerdown [ 52.555180] tegradc tegradc.0: unblank [ 52.555190] tegradc tegradc.1: blank - powerdown [ 141.543754] vi 54080000.vi: Calibrate csi port 0 [ 141.663021] vi 54080000.vi: cil_settingtime was autocalculated [ 141.663029] vi 54080000.vi: csi clock settle time: 13, cil settle time: 10 [ 264.001271] vi 54080000.vi: Calibrate csi port 0 [ 264.118472] vi 54080000.vi: cil_settingtime was autocalculated [ 264.118479] vi 54080000.vi: csi clock settle time: 13, cil settle time: 10