[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (wong@wong-HP-Z420-Workstation) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2010 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefa6000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb n [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29332(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3570272K/4159488K available (15294K kernel code, 2938K rwdata, 6592K rodata, 8576K init, 609K bss, 114080K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff80095f0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095f0000 - 0xffffff8009e50000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e50000 - 0xffffff800a12e808 ( 2939 KB) [ 0.000000] .bss : 0xffffff800a12e808 - 0xffffff800a1c6f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001744] Console: colour dummy device 80x25 [ 0.001755] console [tty0] enabled [ 0.001761] bootconsole [uart8250] disabled [ 0.001781] kmemleak: Kernel memory leak detector disabled [ 0.001799] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001813] pid_max: default: 32768 minimum: 301 [ 0.002261] Security Framework initialized [ 0.002483] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002492] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003610] ftrace: allocating 47144 entries in 185 pages [ 0.172160] sched-energy: CPU device node has no sched-energy-costs [ 0.172194] ASID allocator initialised with 65536 entries [ 0.212030] tegra-id: chipid=22117. [ 0.212043] tegra-id: opt_subrevision=0. [ 0.212059] Tegra Speedo/IDDQ fuse revision 4 [ 0.212064] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212068] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.212075] Tegra: CPU Speedo Value 2061, SoC Speedo Value 1945, GPU Speedo Value 2038 [ 0.212079] Tegra: CPU IDDQ Value 1904, SoC IDDQ Value 2040, GPU IDDQ Value 2425 [ 0.212097] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212111] DTS File Name: /home/wang/Arducam/Jetson/l4t-32.4.4/Linux_for_Tegra/source/public/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210s [ 0.212119] DTB Build time: Jan 16 2021 18:13:48 [ 0.261062] CPU1: Booted secondary processor [411fd071] [ 0.292953] CPU2: Booted secondary processor [411fd071] [ 0.324934] CPU3: Booted secondary processor [411fd071] [ 0.325013] Brought up 4 CPUs [ 0.325020] SMP: Total of 4 processors activated. [ 0.325028] CPU features: detected feature: 32-bit EL0 Support [ 0.325290] CPU: All CPU(s) started at EL2 [ 0.325309] alternatives: patching kernel code [ 0.333348] devtmpfs: initialized [ 0.371576] Initilizing CustomIPI irq domain [ 0.371961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.371985] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.382472] pinctrl core: initialized pinctrl subsystem [ 0.383049] OS set in device tree is not L4T. [ 0.383464] regulator-dummy: no parameters [ 0.383733] Initializing plugin-manager [ 0.383883] Plugin module not found [ 0.384074] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.384629] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.385673] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.385900] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.386504] node /plugin-manager/fragement@10 match with board >=3448-0000-300 [ 0.388383] node /plugin-manager/fragement@13 match with board >=3448-0000-300 [ 0.392050] NET: Registered protocol family 16 [ 0.393361] pstore: using zlib compression [ 0.393405] console [pstore-1] enabled [ 0.393410] pstore: Registered ramoops as persistent store backend [ 0.393416] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409081] cpuidle: using governor menu [ 0.412433] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.414309] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e54000) [ 0.414333] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417490] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.419977] Serial: AMBA PL011 UART driver [ 0.420495] tegra_powergate_init: DONE [ 0.420510] DTS File Name: /home/wang/Arducam/Jetson/l4t-32.4.4/Linux_for_Tegra/source/public/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210s [ 0.420517] DTB Build time: Jan 16 2021 18:13:48 [ 0.422491] Tegra reboot handler registered. [ 0.427040] iommu: Adding device tegra-carveouts to group 0 [ 0.427176] platform tegra-carveouts: domain=ffffffc0f9be33d8 allocates as[0]=ffffffc0f94340a8 [ 0.427521] iommu: Adding device smmu_test to group 1 [ 0.427568] platform smmu_test: domain=ffffffc0f9be3618 allocates as[0]=ffffffc0f9434110 [ 0.428382] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.428437] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.428488] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.428498] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428520] mc-err: mcerr ops are set to t21x [ 0.438563] iommu: Adding device 70090000.xusb to group 2 [ 0.438838] iommu: Adding device 70006000.serial to group 3 [ 0.438904] platform 70006000.serial: domain=ffffffc0f94d9618 allocates as[0]=ffffffc0f9434178 [ 0.439325] iommu: Adding device 70006040.serial to group 4 [ 0.439592] iommu: Adding device 70006200.serial to group 5 [ 0.439809] iommu: Adding device sound to group 6 [ 0.439854] platform sound: domain=ffffffc0f94d9b58 allocates as[0]=ffffffc0f94341e0 [ 0.440398] iommu: Adding device 7000d400.spi to group 7 [ 0.440659] iommu: Adding device 7000d600.spi to group 8 [ 0.440928] iommu: Adding device 70410000.spi to group 9 [ 0.441317] iommu: Adding device 50000000.host1x to group 10 [ 0.441587] iommu: Adding device 54080000.vi to group 11 [ 0.441964] iommu: Adding device 54600000.isp to group 12 [ 0.442220] iommu: Adding device 54680000.isp to group 13 [ 0.442521] iommu: Adding device tegradc.0 to group 14 [ 0.442574] platform tegradc.0: domain=ffffffc0f94e6a98 allocates as[0]=ffffffc0f9434248 [ 0.443091] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.443398] iommu: Adding device tegradc.1 to group 15 [ 0.443445] platform tegradc.1: domain=ffffffc0f94e6cd8 allocates as[0]=ffffffc0f94342b0 [ 0.443944] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.444182] iommu: Adding device 54340000.vic to group 16 [ 0.444395] iommu: Adding device 544c0000.nvenc to group 17 [ 0.444589] iommu: Adding device 54500000.tsec to group 18 [ 0.444792] iommu: Adding device 54100000.tsecb to group 19 [ 0.445027] iommu: Adding device 54480000.nvdec to group 20 [ 0.445248] iommu: Adding device 54380000.nvjpg to group 21 [ 0.446287] iommu: Adding device 546c0000.i2c to group 22 [ 0.446607] iommu: Adding device 57000000.gpu to group 23 [ 0.446661] platform 57000000.gpu: domain=ffffffc0f94f1cd8 allocates as[0]=ffffffc0f9434318 [ 0.446696] platform 57000000.gpu: domain=ffffffc0f94f1cd8 allocates as[1]=ffffffc0f9434380 [ 0.446735] platform 57000000.gpu: domain=ffffffc0f94f1cd8 allocates as[2]=ffffffc0f94343e8 [ 0.446771] platform 57000000.gpu: domain=ffffffc0f94f1cd8 allocates as[3]=ffffffc0f9434450 [ 0.447651] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.447661] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.447673] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.447678] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.447682] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.497127] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497134] tegra-pmc: Clear bootloader IO dpd settings [ 0.497156] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497220] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497509] iommu: Adding device 70012000.se to group 24 [ 0.498276] iommu: Adding device 7000c000.i2c to group 25 [ 0.498523] iommu: Adding device 7000c400.i2c to group 26 [ 0.498775] iommu: Adding device 7000c500.i2c to group 27 [ 0.499017] iommu: Adding device 7000c700.i2c to group 28 [ 0.499297] iommu: Adding device 7000d000.i2c to group 29 [ 0.499543] iommu: Adding device 7000d100.i2c to group 30 [ 0.499818] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.499867] platform sdhci-tegra.0: domain=ffffffc0f9589e58 allocates as[0]=ffffffc0f94344b8 [ 0.500688] iommu: Adding device 700d0000.xudc to group 32 [ 0.503866] vdd-ac-bat: 5000 mV [ 0.504197] vdd-5v0-sys: 5000 mV [ 0.505160] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.505230] vdd-5v0-hdmi: 5000 mV [ 0.505639] vdd-1v8-sys: 1800 mV [ 0.506029] vdd-fan: supplied by vdd-5v0-sys [ 0.506066] vdd-fan: 5000 mV [ 0.506443] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.506498] vdd-usb-vbus: 5000 mV [ 0.507021] vdd-usb-vbus2: 5000 mV [ 0.537913] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540271] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.541446] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.541468] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.541505] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.541838] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.549711] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.550045] SCSI subsystem initialized [ 0.550255] libata version 3.00 loaded. [ 0.550524] usbcore: registered new interface driver usbfs [ 0.550576] usbcore: registered new interface driver hub [ 0.550650] usbcore: registered new device driver usb [ 0.554637] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.560354] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.561194] random: fast init done [ 0.561415] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564235] vdd-ddr-1v1: 1150 mV [ 0.568268] vdd-pre-reg-1v35: 1350 mV [ 0.572230] vdd-1v8: 1800 mV [ 0.576232] avdd-sys-1v2: 1200 mV [ 0.580231] vdd-pex-1v0: 1050 mV [ 0.580904] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.581452] max77620-ldo3: at 3100 mV [ 0.584236] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.584779] max77620-ldo5: at 3100 mV [ 0.588232] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592232] avdd-1v05-pll: 1050 mV [ 0.596229] avdd-io-hdmi-dp: 1050 mV [ 0.598834] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599136] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.599429] max77620 4-003c: max77620 probe successful [ 0.602105] media: Linux media interface: v0.10 [ 0.602166] Linux video capture interface: v2.00 [ 0.603101] pps_core: LinuxPPS API ver. 1 registered [ 0.603107] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603131] PTP clock support registered [ 0.606478] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.607300] Advanced Linux Sound Architecture Driver Initialized. [ 0.608034] Bluetooth: Core ver 2.22 [ 0.608085] NET: Registered protocol family 31 [ 0.608089] Bluetooth: HCI device and connection manager initialized [ 0.608103] Bluetooth: HCI socket layer initialized [ 0.608112] Bluetooth: L2CAP socket layer initialized [ 0.608136] Bluetooth: SCO socket layer initialized [ 0.610001] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.610018] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.610065] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.610080] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.613649] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.614869] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.614953] vdd-3v3-sys: 3300 mV [ 0.615230] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.616311] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.616764] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.616806] vdd-3v3-sd: 3300 mV [ 0.617917] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.617959] avdd-io-edp-1v05: 1050 mV [ 0.618401] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.618437] vdd-usb-hub-en: 5000 mV [ 0.619861] camchar: rtcpu character device driver loaded [ 0.620609] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.621941] clocksource: Switched to clocksource arch_sys_counter [ 0.662061] VFS: Disk quotas dquot_6.6.0 [ 0.662191] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.662661] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.663080] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.663097] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.663297] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.663303] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.663316] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.663344] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.663350] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.663366] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.663375] nvmap_page_pool_init: Total RAM pages: 1011352 [ 0.663379] nvmap_page_pool_init: nvmap page pool size: 126419 pages (493 MB) [ 0.663463] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.663953] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.664850] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.673161] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.673617] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.674012] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.674296] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.674473] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.674734] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.674739] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.675169] NET: Registered protocol family 2 [ 0.676150] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.676360] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.676856] TCP: Hash tables configured (established 32768 bind 32768) [ 0.676998] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.677079] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.677496] NET: Registered protocol family 1 [ 0.678332] RPC: Registered named UNIX socket transport module. [ 0.678337] RPC: Registered udp transport module. [ 0.678340] RPC: Registered tcp transport module. [ 0.678344] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.678359] PCI: CLS 0 bytes, default 64 [ 0.678596] Trying to unpack rootfs image as initramfs... [ 0.909873] Freeing initrd memory: 5356K [ 0.919696] host1x 50000000.host1x: initialized [ 0.921562] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.924729] audit: initializing netlink subsys (disabled) [ 0.924799] audit: type=2000 audit(0.775:1): initialized [ 0.925551] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.935478] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.936943] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.937730] 9p: Installing v9fs 9p2000 file system support [ 0.941031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.941162] io scheduler noop registered [ 0.941452] io scheduler cfq registered (default) [ 0.944254] gic 702f9000.agic: GIC IRQ controller registered [ 0.947256] iommu: Adding device 702ef000.adsp to group 33 [ 0.956097] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.956259] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.956849] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x89e8c0f [ 0.956857] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.958747] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.958855] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.958944] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.959130] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.959220] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.959303] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.959389] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.959471] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.959559] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.959641] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.965748] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.967498] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.969362] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.970657] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.971007] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.972216] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.972440] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.972661] Adding domain tsec-pd to PM domain host1x-pd [ 0.975040] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.975950] tsec 54500000.tsec: initialized [ 0.977444] tsec 54100000.tsecb: initialized [ 0.978199] Adding domain nvdec-pd to PM domain host1x-pd [ 0.981644] nvdec 54480000.nvdec: initialized [ 0.982740] Adding domain vic03-pd to PM domain host1x-pd [ 0.982920] Adding domain msenc-pd to PM domain host1x-pd [ 0.983080] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.987056] falcon 54340000.vic: initialized [ 0.988276] falcon 544c0000.nvenc: initialized [ 0.989557] falcon 54380000.nvjpg: initialized [ 0.994120] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 0.994165] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 0.994195] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 0.994245] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 0.994339] display board info: id 0x0, fab 0x0 [ 0.994398] generic_infoframe_type: 0x87 [ 0.994481] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 0.994488] tegra_cec 70015000.tegra_cec: probed [ 0.994561] tegradc tegradc.0: DT parsed successfully [ 0.994615] tegradc tegradc.0: Display dc.ffffff800ab80000 registered with id=0 [ 1.002108] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.006792] tegradc tegradc.0: probed [ 1.007510] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.007617] Console: switching to colour frame buffer device 80x30 [ 1.007649] tegradc tegradc.0: fb registered [ 1.008686] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.008696] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.009023] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.009121] tegradc tegradc.1: No lt-data, using default setting [ 1.009159] tegradc tegradc.1: No hpd-gpio in DT [ 1.009177] kfuse 7000fc00.kfuse: initialized [ 1.009199] tegradc tegradc.1: DT parsed successfully [ 1.009253] tegradc tegradc.1: Display dc.ffffff800ad00000 registered with id=1 [ 1.010468] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.010990] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.011426] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.012493] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.012504] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.012886] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.014227] vdd-gpu: applied init 1000000uV constraint [ 1.014235] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.014622] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.517002] Host read timeout at address 545c00c4 [ 1.518512] tegradc tegradc.1: probed [ 1.518807] tegradc tegradc.1: fb registered [ 1.522014] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.522021] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.522031] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.522043] tegradc tegradc.1: blank - powerdown [ 1.522064] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.522070] Extcon DP: HPD disabled [ 1.522074] hpd: hpd_switch 0 [ 1.522078] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.522087] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.522094] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.524997] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.525102] No Device Node present for smmu client: serial8250 !! [ 1.525113] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.525153] iommu: Adding device serial8250 to group 35 [ 1.527850] console [ttyS0] disabled [ 1.527911] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.538223] console [ttyS0] enabled [ 1.539269] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.539573] serial-tegra 70006200.serial: RX in PIO mode [ 1.539676] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.540669] [drm] Initialized [ 1.555308] brd: module loaded [ 1.560564] loop: module loaded [ 1.560657] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.560773] tegra_profiler: auth: init [ 1.562239] THERMAL EST: found 2 subdevs [ 1.562248] THERMAL EST num_resources: 0 [ 1.562254] [THERMAL EST subdev 0] [ 1.562261] [THERMAL EST subdev 1] [ 1.562873] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.562878] THERMAL EST: thz register success. [ 1.563041] THERMAL EST: end of probe, return err: 0 [ 1.564275] sd: No Scsi addr parsed to reserve index [ 1.564316] hisi_sas: driver version v1.6 [ 1.569002] tegra-qspi 70410000.spi: Prod settings list not found [ 1.570266] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.570276] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.573220] libphy: Fixed MDIO Bus: probed [ 1.574262] tun: Universal TUN/TAP device driver, 1.6 [ 1.574270] tun: (C) 1999-2004 Max Krasnyansky [ 1.575311] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.575318] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.575368] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.575372] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.575417] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.575421] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.575467] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.575472] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.576660] PPP generic driver version 2.4.2 [ 1.576861] PPP BSD Compression module registered [ 1.576866] PPP Deflate Compression module registered [ 1.576908] PPP MPPE Compression module registered [ 1.576914] NET: Registered protocol family 24 [ 1.576987] usbcore: registered new interface driver r8152 [ 1.577026] usbcore: registered new interface driver asix [ 1.577065] usbcore: registered new interface driver ax88179_178a [ 1.577096] usbcore: registered new interface driver cdc_ether [ 1.577125] usbcore: registered new interface driver net1080 [ 1.577159] usbcore: registered new interface driver cdc_subset [ 1.577190] usbcore: registered new interface driver zaurus [ 1.577236] usbcore: registered new interface driver cdc_ncm [ 1.577590] VFIO - User Level meta-driver version: 0.3 [ 1.579012] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.579038] ehci-pci: EHCI PCI platform driver [ 1.579081] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.579093] ohci-pci: OHCI PCI platform driver [ 1.579133] ohci-platform: OHCI generic platform driver [ 1.581804] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.582463] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.583692] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f90e1c00 id [ 1.585922] usbcore: registered new interface driver uas [ 1.585986] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.586054] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.586082] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.586873] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.586935] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.587153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.587160] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.587166] usb usb1: Product: xHCI Host Controller [ 1.587171] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.587176] usb usb1: SerialNumber: 70090000.xusb [ 1.587841] hub 1-0:1.0: USB hub found [ 1.587885] hub 1-0:1.0: 5 ports detected [ 1.588003] usbcore: registered new interface driver usb-storage [ 1.588137] usbcore: registered new interface driver usbserial [ 1.588705] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.588719] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.588921] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.589030] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.589036] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.589041] usb usb2: Product: xHCI Host Controller [ 1.589045] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.589049] usb usb2: SerialNumber: 70090000.xusb [ 1.589658] hub 2-0:1.0: USB hub found [ 1.589698] hub 2-0:1.0: 4 ports detected [ 1.592038] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.593388] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.593403] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.593438] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.593702] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.594923] mousedev: PS/2 mouse device common for all mice [ 1.595095] usbcore: registered new interface driver xpad [ 1.690046] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.722889] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.725499] rtc rtc1: alarm rtc device [ 1.725520] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.725548] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.726263] i2c /dev entries driver [ 1.728482] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.728956] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.728963] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.729711] imx477 7-001a: tegracam sensor driver:imx477_v2.0.6 [ 1.900586] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.913960] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.943120] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.943127] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.943132] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.943137] usb 1-2: Manufacturer: Generic [ 1.944270] hub 1-2:1.0: USB hub found [ 1.944877] hub 1-2:1.0: 4 ports detected [ 2.001970] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.001976] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.031785] imx477 8-001a: tegracam sensor driver:imx477_v2.0.6 [ 2.233953] usb 1-2.2: new full-speed USB device number 3 using tegra-xusb [ 2.258662] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c52b [ 2.258669] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.258674] usb 1-2.2: Product: USB Receiver [ 2.258679] usb 1-2.2: Manufacturer: Logitech [ 2.304885] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.334936] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 2.337795] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 2.337803] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 2.338308] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.338327] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 2.338337] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 2.338495] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.338506] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 2.338513] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 2.338665] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.338677] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 2.338683] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 2.338869] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 2.339783] tegra_aotag tegra-aotag: Registering sensor 0 [ 2.339844] tegra_aotag tegra-aotag: Invalid temp readout [ 2.339869] tegra_aotag tegra-aotag: Invalid temp readout [ 2.339887] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 2.339896] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 2.340765] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.340786] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 2.340964] tegra_aotag tegra-aotag: Invalid temp readout [ 2.340996] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 2.341384] parse_throttle_dt_data: Num cap clks = 6 [ 2.341392] parse_throttle_dt_data: clk=cclk_g type=2 [ 2.341406] parse_throttle_dt_data: clk=gpu type=4 [ 2.341430] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 2.341450] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 2.341472] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 2.341476] parse_throttle_dt_data: clk=emc type=3 [ 2.342244] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.342394] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.342584] tegra_throttle_probe: probe successful. #cdevs=4 [ 2.343581] FAN dev name: pwm-fan [ 2.343668] FAN:gpio request success. [ 2.343747] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 2.344061] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.344262] pwm_fan_driver pwm-fan: fan tach request irq success [ 2.344274] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.344390] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.344396] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 2.344401] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 2.344406] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 2.344411] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.344416] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.344420] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.344425] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.344430] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.344435] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.346985] device-mapper: uevent: version 1.0.3 [ 2.347570] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.353583] tegra210-cpufreq cpufreq: probe()...completed [ 2.354482] sdhci: Secure Digital Host Controller Interface driver [ 2.354485] sdhci: Copyright(c) Pierre Ossman [ 2.354487] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.354987] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 2.355332] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 2.355463] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 2.360379] tegra-se 70012000.se: tegra_se_probe: complete [ 2.360906] hidraw: raw HID events driver (C) Jiri Kosina [ 2.369311] usbcore: registered new interface driver usbhid [ 2.369314] usbhid: USB HID core driver [ 2.371528] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 2.371752] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 2.373592] nvpmodel: initialized successfully [ 2.374771] usbcore: registered new interface driver snd-usb-audio [ 2.374827] No Device Node present for smmu client: snd-soc-dummy !! [ 2.374832] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 2.374849] iommu: Adding device snd-soc-dummy to group 36 [ 2.381709] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 2.398332] OPE platform probe [ 2.398412] OPE platform probe successful [ 2.398666] OPE platform probe [ 2.398747] OPE platform probe successful [ 2.402079] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 2.428379] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.428508] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.428637] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.428763] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.428889] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.429022] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.429149] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.429274] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.429401] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.429527] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.442274] u32 classifier [ 2.442277] Actions configured [ 2.442352] Initializing XFRM netlink socket [ 2.443059] NET: Registered protocol family 10 [ 2.443750] NET: Registered protocol family 17 [ 2.443764] NET: Registered protocol family 15 [ 2.443839] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.443887] Bluetooth: RFCOMM socket layer initialized [ 2.443896] Bluetooth: RFCOMM ver 1.11 [ 2.443901] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.443906] Bluetooth: HIDP socket layer initialized [ 2.443924] 9pnet: Installing 9P2000 support [ 2.443962] Key type dns_resolver registered [ 2.444383] Registered cp15_barrier emulation handler [ 2.444389] Registered setend emulation handler [ 2.445456] registered taskstats version 1 [ 2.445996] Adding domain ve2-pd to PM domain host1x-pd [ 2.446248] Adding domain ve-pd to PM domain host1x-pd [ 2.448355] isp 54600000.isp: initialized [ 2.449315] isp 54680000.isp: initialized [ 2.461425] last reset is due to power on reset [ 2.461429] KERNEL: PMC reset status reg: 0x0 [ 2.461491] BL: PMC reset status reg: 0x0 [ 2.461493] BL: PMIC poweroff Event Recorder: 0x40 [ 2.463101] clk_cbus_recalc_rate: no gbus parent [ 2.463107] clk_cbus_round_rate: no gbus parent [ 2.463109] clk_cbus_round_rate: no gbus parent [ 2.463117] clk_cbus_recalc_rate: no gbus parent [ 2.463220] clk_cbus_recalc_rate: no gbus parent [ 2.463223] clk_cbus_round_rate: no gbus parent [ 2.463225] clk_cbus_round_rate: no gbus parent [ 2.463229] clk_cbus_recalc_rate: no gbus parent [ 2.463912] tegra_dvfs: GPU-cap: registered [ 2.463967] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 2.463969] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 2.463972] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 2.477643] tegra_dvfs: vdd-gpu-vts: registered [ 2.483468] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 2.484121] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 2.484669] input: gpio-keys as /devices/gpio-keys/input/input1 [ 2.515638] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:12 UTC (946688412) [ 2.516680] vi 54080000.vi: vi_probe: ++ [ 2.519774] vi 54080000.vi: initialized [ 2.521811] vi 54080000.vi: subdev nvcsi--2 bound [ 2.521824] vi 54080000.vi: subdev imx477 7-001a bound [ 2.522633] vi 54080000.vi: subdev nvcsi--1 bound [ 2.522639] vi 54080000.vi: subdev imx477 8-001a bound [ 2.524097] Disable partitions left on by BL [ 2.524101] disb [ 2.524139] bwmgr: missing cdev-type property [ 2.524232] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.524238] DRAM derating cdev registered. [ 2.525359] vdd-fan: disabling [ 2.525362] vdd-usb-vbus: disabling [ 2.525364] vdd-usb-vbus2: disabling [ 2.525374] vddio-sdmmc3-ap: disabling [ 2.525461] avdd-io-edp-1v05: disabling [ 2.525464] vdd-usb-hub-en: disabling [ 2.525550] ALSA device list: [ 2.525553] #0: tegra-hda at 0x70038000 irq 83 [ 2.525555] #1: tegra-snd-t210ref-mobile-rt565x [ 2.528684] Freeing unused kernel memory: 8576K [ 2.552494] Root device found: mmcblk0p1 [ 2.603057] mmc0: hw tuning done ... [ 2.603096] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 2.603432] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 2.612167] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 2.710006] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.712084] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.757241] Found dev node: /dev/mmcblk0p1 [ 2.815533] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.815539] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.815543] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.815546] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.815550] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.815572] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.815633] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.815787] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.815891] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.815914] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.815943] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.815962] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.816096] pci 0000:01:00.0: supports D1 D2 [ 2.816099] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.816448] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.817192] Rootfs mounted over mmcblk0p1 [ 2.830108] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.830138] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 2.830142] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.830149] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit] [ 2.830166] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit] [ 2.830182] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.830190] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.830194] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.830199] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] [ 2.830477] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.830481] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.830487] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.830571] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.830815] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.830832] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.842800] Switching from initrd to actual rootfs [ 2.845222] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.845289] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:3d:1c:a7 from device tree [ 2.845722] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.845736] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 3.114925] systemd[1]: System time before build time, advancing clock. [ 3.153891] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.166214] cgroup: cgroup2: unknown option "nsdelegate" [ 3.194439] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS) [ 3.195190] systemd[1]: Detected architecture arm64. [ 3.219973] systemd[1]: Set hostname to . [ 3.378442] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.378452] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.550131] random: systemd: uninitialized urandom read (16 bytes read) [ 3.551724] systemd[1]: Created slice User and Session Slice. [ 3.551861] random: systemd: uninitialized urandom read (16 bytes read) [ 3.551980] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.552141] random: systemd: uninitialized urandom read (16 bytes read) [ 3.553951] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.554011] systemd[1]: Reached target User and Group Name Lookups. [ 3.554051] systemd[1]: Reached target Swap. [ 3.680721] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.781137] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.788085] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.788105] cpu-throttle-alert cooling device registered. [ 3.788225] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.788240] gpu-throttle-alert cooling device registered. [ 3.788437] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.788449] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.788465] hot-surface-alert cooling device registered. [ 3.922124] systemd-journald[2003]: Received request to flush runtime journal from PID 1 [ 4.814280] random: crng init done [ 4.817685] random: 7 urandom warning(s) missed due to ratelimiting [ 4.883409] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x1a [ 4.890075] regmap_util_write_table_8:regmap_util_write_table:-121 [ 4.916983] imx477 7-001a: Error writing mode [ 4.925672] vi 54080000.vi: calibration failed with -121 error [ 5.750404] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 5.750409] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 5.822972] logitech-djreceiver 0003:046D:C52B.0003: hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-2.2/input2 [ 5.959036] input: Logitech K400 Plus as /devices/70090000.xusb/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input2 [ 5.959882] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-70090000.xusb-2.2:1 [ 6.078379] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 6.107051] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 6.107058] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.107062] usb 2-1: Product: 4-Port USB 3.1 Hub [ 6.107066] usb 2-1: Manufacturer: Generic [ 6.110522] hub 2-1:1.0: USB hub found [ 6.111755] hub 2-1:1.0: 4 ports detected [ 6.261999] usb 2-1: usb_suspend_both: status 0 [ 6.262140] usb usb2: usb_suspend_both: status 0 [ 6.479554] using random self ethernet address [ 6.484022] using random host ethernet address [ 7.696002] Mass Storage Function, version: 2009/09/11 [ 7.696009] LUN: removable file: (no medium) [ 7.703948] using random self ethernet address [ 7.708818] using random host ethernet address [ 7.762327] rndis0: HOST MAC 7e:2f:3b:4e:51:3c [ 7.766248] rndis0: MAC 7e:2f:3b:4e:51:3d [ 7.770294] usb0: HOST MAC 7e:2f:3b:4e:51:3e [ 7.770327] usb0: MAC 7e:2f:3b:4e:51:3f [ 7.770348] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 7.772179] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 7.772199] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.772345] tegra-xudc-new 700d0000.xudc: entering ELPG [ 7.772612] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 7.772632] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 7.773310] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 7.773333] tegra-xudc-new 700d0000.xudc: entering ELPG [ 7.773564] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 7.778302] l4tbr0: port 1(rndis0) entered blocking state [ 7.778307] l4tbr0: port 1(rndis0) entered disabled state [ 7.778768] device rndis0 entered promiscuous mode [ 7.798200] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.813924] l4tbr0: port 2(usb0) entered blocking state [ 7.814182] l4tbr0: port 2(usb0) entered disabled state [ 7.815148] device usb0 entered promiscuous mode [ 7.830144] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 8.530785] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.531806] eth0: 0xffffff800aac1000, 48:b0:2d:3d:1c:a7, IRQ 407 [ 8.583554] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.790262] zram: Added device: zram0 [ 8.790698] zram: Added device: zram1 [ 8.791323] zram: Added device: zram2 [ 8.792330] zram: Added device: zram3 [ 8.820592] zram0: detected capacity change from 0 to 519598080 [ 8.873787] Adding 507416k swap on /dev/zram0. Priority:5 extents:1 across:507416k SS [ 8.880434] zram1: detected capacity change from 0 to 519598080 [ 8.896766] Adding 507416k swap on /dev/zram1. Priority:5 extents:1 across:507416k SS [ 8.913190] zram2: detected capacity change from 0 to 519598080 [ 8.940967] Adding 507416k swap on /dev/zram2. Priority:5 extents:1 across:507416k SS [ 8.968248] zram3: detected capacity change from 0 to 519598080 [ 9.004966] Adding 507416k swap on /dev/zram3. Priority:5 extents:1 across:507416k SS [ 11.052199] tegradc tegradc.0: blank - powerdown [ 11.052208] tegradc tegradc.1: blank - powerdown [ 11.894441] fuse init (API version 7.26) [ 12.657970] r8168: eth0: link up [ 12.657993] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.053267] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.053278] Bluetooth: BNEP socket layer initialized [ 15.662604] edid invalid [ 15.735829] edid invalid [ 16.039619] edid invalid [ 16.177832] tegradc tegradc.0: blank - powerdown [ 16.188568] tegradc tegradc.0: unblank [ 16.223211] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 16.223304] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 16.225905] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 16.225914] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 16.260813] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 16.260816] Extcon AUX1(HDMI) enable [ 16.260958] extcon-disp-state extcon:disp-state: cable 51 state 1 [ 16.260961] Extcon HDMI: HPD enabled [ 16.260990] tegradc tegradc.0: hdmi: plugged [ 16.271600] tegradc tegradc.0: blank - powerdown [ 16.292956] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 16.292959] Extcon AUX1(HDMI) disable [ 16.314588] tegradc tegradc.1: blank - powerdown [ 18.773215] tegradc tegradc.0: blank - powerdown [ 18.773236] tegradc tegradc.0: unblank [ 18.804900] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 18.805771] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 18.810054] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 18.810063] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 18.855897] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 18.855900] Extcon AUX1(HDMI) enable [ 18.862659] tegradc tegradc.0: unblank [ 18.862916] tegradc tegradc.1: blank - powerdown [ 33.051718] tegradc tegradc.0: blank - powerdown [ 33.111685] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 33.111689] Extcon AUX1(HDMI) disable [ 33.130825] tegradc tegradc.1: blank - powerdown [ 33.278955] tegradc tegradc.0: blank - powerdown [ 33.278976] tegradc tegradc.0: unblank [ 33.287312] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 33.287399] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 33.288406] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 33.288414] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 33.323390] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 33.323392] Extcon AUX1(HDMI) enable [ 33.331112] tegradc tegradc.0: unblank [ 33.331122] tegradc tegradc.1: blank - powerdown [ 38.243562] tegradc tegradc.0: unblank [ 38.243821] tegradc tegradc.1: blank - powerdown [ 60.270540] nvgpu: 57000000.gpu railgate_enable_store:297 [INFO] railgate is disabled.