dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-5294-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Feb 19 08:40:32 PST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00140000@92cb4000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304 [ 0.000000] pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 gpt tegra_fbmem=0x140000@0x92cb4000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29180(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3567288K/4159488K available (15294K kernel code, 2942K rwdata, 6664K rodata, 8576K init, 609K bss, 117064K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a13f808 - 0xffffff800a1d7cbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001819] Console: colour dummy device 80x25 [ 0.001830] console [tty0] enabled [ 0.001836] bootconsole [uart8250] disabled [ 0.001851] kmemleak: Kernel memory leak detector disabled [ 0.001871] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001883] pid_max: default: 32768 minimum: 301 [ 0.002336] Security Framework initialized [ 0.002553] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002562] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003694] ftrace: allocating 47208 entries in 185 pages [ 0.172439] sched-energy: CPU device node has no sched-energy-costs [ 0.172471] ASID allocator initialised with 65536 entries [ 0.212258] tegra-id: chipid=22117. [ 0.212270] tegra-id: opt_subrevision=0. [ 0.212289] Tegra Speedo/IDDQ fuse revision 4 [ 0.212294] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.212298] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.212304] Tegra: CPU Speedo Value 2000, SoC Speedo Value 1922, GPU Speedo Value 1998 [ 0.212307] Tegra: CPU IDDQ Value 1976, SoC IDDQ Value 2644, GPU IDDQ Value 2950 [ 0.212325] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.212341] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.212348] DTB Build time: Nov 12 2021 11:38:50 [ 0.261062] CPU1: Booted secondary processor [411fd071] [ 0.292982] CPU2: Booted secondary processor [411fd071] [ 0.324946] CPU3: Booted secondary processor [411fd071] [ 0.325041] Brought up 4 CPUs [ 0.325047] SMP: Total of 4 processors activated. [ 0.325054] CPU features: detected feature: 32-bit EL0 Support [ 0.325319] CPU: All CPU(s) started at EL2 [ 0.325336] alternatives: patching kernel code [ 0.333575] devtmpfs: initialized [ 0.373033] Initilizing CustomIPI irq domain [ 0.373466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.373487] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384154] pinctrl core: initialized pinctrl subsystem [ 0.384755] OS set in device tree is not L4T. [ 0.385198] regulator-dummy: no parameters [ 0.385460] Initializing plugin-manager [ 0.385623] Plugin module not found [ 0.385817] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.386320] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.386764] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.387477] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.387684] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.388244] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.390229] node /plugin-manager/fragement@13 match with board >=3448-0002-300 [ 0.393994] NET: Registered protocol family 16 [ 0.395479] pstore: using zlib compression [ 0.395520] console [pstore-1] enabled [ 0.395525] pstore: Registered ramoops as persistent store backend [ 0.395530] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405086] cpuidle: using governor menu [ 0.409543] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.411317] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.411341] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413573] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.416012] Serial: AMBA PL011 UART driver [ 0.416518] tegra_powergate_init: DONE [ 0.416532] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.416539] DTB Build time: Nov 12 2021 11:38:50 [ 0.418588] Tegra reboot handler registered. [ 0.423228] iommu: Adding device tegra-carveouts to group 0 [ 0.423373] platform tegra-carveouts: domain=ffffffc0f94513d8 allocates as[0]=ffffffc0f94340a8 [ 0.423734] iommu: Adding device smmu_test to group 1 [ 0.423782] platform smmu_test: domain=ffffffc0f9451618 allocates as[0]=ffffffc0f9434110 [ 0.424613] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.424666] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.424722] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.424731] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.424753] mc-err: mcerr ops are set to t21x [ 0.435275] iommu: Adding device 70090000.xusb to group 2 [ 0.435558] iommu: Adding device 70006000.serial to group 3 [ 0.435633] platform 70006000.serial: domain=ffffffc0f94dd6d8 allocates as[0]=ffffffc0f9434178 [ 0.436050] iommu: Adding device 70006040.serial to group 4 [ 0.436313] iommu: Adding device 70006200.serial to group 5 [ 0.436537] iommu: Adding device sound to group 6 [ 0.436585] platform sound: domain=ffffffc0f94ddc18 allocates as[0]=ffffffc0f94341e0 [ 0.437242] iommu: Adding device 7000d400.spi to group 7 [ 0.437506] iommu: Adding device 7000d600.spi to group 8 [ 0.437837] iommu: Adding device 50000000.host1x to group 9 [ 0.438105] iommu: Adding device 54080000.vi to group 10 [ 0.438490] iommu: Adding device 54600000.isp to group 11 [ 0.438748] iommu: Adding device 54680000.isp to group 12 [ 0.439025] iommu: Adding device tegradc.1 to group 13 [ 0.439100] platform tegradc.1: domain=ffffffc0f94ea9d8 allocates as[0]=ffffffc0f9434248 [ 0.440490] platform tegradc.1: IOVA linear map 0x0000000092cb4000(140000) [ 0.440877] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.441163] iommu: Adding device 54340000.vic to group 14 [ 0.441369] iommu: Adding device 544c0000.nvenc to group 15 [ 0.441562] iommu: Adding device 54500000.tsec to group 16 [ 0.441754] iommu: Adding device 54100000.tsecb to group 17 [ 0.441948] iommu: Adding device 54480000.nvdec to group 18 [ 0.442140] iommu: Adding device 54380000.nvjpg to group 19 [ 0.443032] iommu: Adding device 546c0000.i2c to group 20 [ 0.443368] iommu: Adding device 57000000.gpu to group 21 [ 0.443438] platform 57000000.gpu: domain=ffffffc0f94f5918 allocates as[0]=ffffffc0f94342b0 [ 0.443472] platform 57000000.gpu: domain=ffffffc0f94f5918 allocates as[1]=ffffffc0f9434318 [ 0.443508] platform 57000000.gpu: domain=ffffffc0f94f5918 allocates as[2]=ffffffc0f9434380 [ 0.443544] platform 57000000.gpu: domain=ffffffc0f94f5918 allocates as[3]=ffffffc0f94343e8 [ 0.444403] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.444413] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.444424] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.444428] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.444431] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.497176] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497185] tegra-pmc: Clear bootloader IO dpd settings [ 0.497206] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497270] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497583] iommu: Adding device 70012000.se to group 22 [ 0.498362] iommu: Adding device 7000c000.i2c to group 23 [ 0.498626] iommu: Adding device 7000c400.i2c to group 24 [ 0.498875] iommu: Adding device 7000c500.i2c to group 25 [ 0.499128] iommu: Adding device 7000c700.i2c to group 26 [ 0.499376] iommu: Adding device 7000d000.i2c to group 27 [ 0.499622] iommu: Adding device 7000d100.i2c to group 28 [ 0.499883] iommu: Adding device sdhci-tegra.3 to group 29 [ 0.499960] platform sdhci-tegra.3: domain=ffffffc0f9570a98 allocates as[0]=ffffffc0f9434450 [ 0.500807] iommu: Adding device 700d0000.xudc to group 30 [ 0.504021] vdd-ac-bat: 5000 mV [ 0.504362] vdd-5v0-sys: 5000 mV [ 0.505331] OF: /regulators/regulator@5: could not get #gpio-cells for /regulators/regulator@0 [ 0.505381] reg-fixed-voltage: probe of regulators:regulator@5 failed with error -22 [ 0.505675] vdd-1v8-sys: 1800 mV [ 0.506059] vdd-fan: supplied by vdd-5v0-sys [ 0.506134] vdd-fan: 5000 mV [ 0.506542] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.506574] vdd-usb-vbus: 5000 mV [ 0.507074] vdd-usb-vbus2: 5000 mV [ 0.537922] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540319] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.542552] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.542574] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.542611] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.542991] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.551172] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.551519] SCSI subsystem initialized [ 0.551738] libata version 3.00 loaded. [ 0.552007] usbcore: registered new interface driver usbfs [ 0.552067] usbcore: registered new interface driver hub [ 0.552141] usbcore: registered new device driver usb [ 0.556121] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.560359] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.561186] random: fast init done [ 0.561415] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564330] vdd-ddr-1v1: 1150 mV [ 0.569048] vdd-pre-reg-1v35: 1350 mV [ 0.572964] vdd-1v8: 1800 mV [ 0.576962] avdd-sys-1v2: 1200 mV [ 0.580970] vdd-pex-1v0: 1050 mV [ 0.581637] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.582190] max77620-ldo3: at 3100 mV [ 0.584968] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.585509] max77620-ldo5: at 3100 mV [ 0.588971] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592968] avdd-1v05-pll: 1050 mV [ 0.596967] avdd-io-hdmi-dp: 1050 mV [ 0.599609] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599890] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.600178] max77620 4-003c: max77620 probe successful [ 0.602889] media: Linux media interface: v0.10 [ 0.602947] Linux video capture interface: v2.00 [ 0.603884] pps_core: LinuxPPS API ver. 1 registered [ 0.603888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603910] PTP clock support registered [ 0.607148] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.608057] Advanced Linux Sound Architecture Driver Initialized. [ 0.608710] Bluetooth: Core ver 2.22 [ 0.608756] NET: Registered protocol family 31 [ 0.608760] Bluetooth: HCI device and connection manager initialized [ 0.608775] Bluetooth: HCI socket layer initialized [ 0.608783] Bluetooth: L2CAP socket layer initialized [ 0.608809] Bluetooth: SCO socket layer initialized [ 0.610566] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.610582] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.610628] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.610643] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.614425] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.615592] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.615654] vdd-3v3-sys: 3300 mV [ 0.615932] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.621275] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.621727] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.621800] vdd-3v3-sd: 3300 mV [ 0.622231] OF: /regulators/regulator@4: could not get #gpio-cells for /regulators/regulator@0 [ 0.622275] reg-fixed-sync-voltage: probe of regulators:regulator@4 failed with error -22 [ 0.622395] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.622436] vdd-usb-hub-en: 5000 mV [ 0.623760] camchar: rtcpu character device driver loaded [ 0.624440] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1 [ 0.625934] clocksource: Switched to clocksource arch_sys_counter [ 0.666509] VFS: Disk quotas dquot_6.6.0 [ 0.666646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.667141] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.667559] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.667574] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.667806] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.667811] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.667823] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.667863] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.667869] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.667880] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.667889] nvmap_page_pool_init: Total RAM pages: 1010606 [ 0.667894] nvmap_page_pool_init: nvmap page pool size: 126325 pages (493 MB) [ 0.667978] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.668420] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.669233] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.677989] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.678476] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.678858] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.679135] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.679339] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.679610] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.679614] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.680040] NET: Registered protocol family 2 [ 0.680997] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.681208] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.681708] TCP: Hash tables configured (established 32768 bind 32768) [ 0.681857] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.682025] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.682444] NET: Registered protocol family 1 [ 0.683189] RPC: Registered named UNIX socket transport module. [ 0.683193] RPC: Registered udp transport module. [ 0.683197] RPC: Registered tcp transport module. [ 0.683200] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.683214] PCI: CLS 0 bytes, default 64 [ 0.683454] Trying to unpack rootfs image as initramfs... [ 0.986532] Freeing initrd memory: 6992K [ 0.996503] host1x 50000000.host1x: initialized [ 0.998420] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.001688] audit: initializing netlink subsys (disabled) [ 1.001779] audit: type=2000 audit(0.851:1): initialized [ 1.002575] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.012441] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.013963] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.014765] 9p: Installing v9fs 9p2000 file system support [ 1.017996] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.018290] io scheduler noop registered [ 1.018581] io scheduler cfq registered (default) [ 1.021249] gic 702f9000.agic: GIC IRQ controller registered [ 1.024630] iommu: Adding device 702ef000.adsp to group 31 [ 1.033463] iommu: Adding device aconnect@702c0000:adsp_audio to group 32 [ 1.033607] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.034469] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x820a410 [ 1.034477] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.036110] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.036201] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.036315] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.036501] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.036586] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.036667] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.036756] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.036840] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.036924] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.037015] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.043284] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.044977] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.046897] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.048168] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.048511] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.049669] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.049894] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.050075] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.050425] Adding domain tsec-pd to PM domain host1x-pd [ 1.053815] tsec 54500000.tsec: initialized [ 1.055295] tsec 54100000.tsecb: initialized [ 1.056018] Adding domain nvdec-pd to PM domain host1x-pd [ 1.059581] nvdec 54480000.nvdec: initialized [ 1.060628] Adding domain vic03-pd to PM domain host1x-pd [ 1.060804] Adding domain msenc-pd to PM domain host1x-pd [ 1.060976] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.065164] falcon 54340000.vic: initialized [ 1.066451] falcon 544c0000.nvenc: initialized [ 1.067835] falcon 54380000.nvjpg: initialized [ 1.072382] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=95 [ 1.072425] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.072456] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.072560] tegradc tegradc.1: disp0 connected to head1->/host1x/sor1 [ 1.072651] display board info: id 0x0, fab 0x0 [ 1.072739] tegradc tegradc.1: No lt-data, using default setting [ 1.072759] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.072765] tegra_cec 70015000.tegra_cec: probed [ 1.072771] tegradc tegradc.1: No hpd-gpio in DT [ 1.072820] tegradc tegradc.1: DT parsed successfully [ 1.072878] tegradc tegradc.1: Display dc.ffffff800ab80000 registered with id=0 [ 1.073381] tegradc tegradc.1: dc_dp_out_hotplug_init: couldn't get regulator vdd_hdmi_5v0 [ 1.080543] tegradc tegradc.1: probed [ 1.080557] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.081269] Console: switching to colour frame buffer device 80x30 [ 1.081303] tegradc tegradc.1: fb registered [ 1.084539] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.084545] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.084555] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.084571] tegradc tegradc.1: blank - powerdown [ 1.084635] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.084641] Extcon DP: HPD disabled [ 1.084646] hpd: hpd_switch 0 [ 1.084650] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.084659] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.084667] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.086137] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.086763] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.086768] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.087035] kfuse 7000fc00.kfuse: initialized [ 1.088062] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.088873] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.089852] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.089861] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.090279] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.091610] vdd-gpu: applied init 1000000uV constraint [ 1.091618] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.091966] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.095649] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.095749] No Device Node present for smmu client: serial8250 !! [ 1.095758] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.095797] iommu: Adding device serial8250 to group 33 [ 1.098429] console [ttyS0] disabled [ 1.098501] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.115867] console [ttyS0] enabled [ 1.116893] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.117178] serial-tegra 70006200.serial: RX in PIO mode [ 1.117266] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.118284] [drm] Initialized [ 1.128805] brd: module loaded [ 1.134430] loop: module loaded [ 1.134538] tegra_profiler: version: 1.143, samples/io: 48/28 [ 1.134668] tegra_profiler: auth: init [ 1.136110] THERMAL EST: found 2 subdevs [ 1.136118] THERMAL EST num_resources: 0 [ 1.136125] [THERMAL EST subdev 0] [ 1.136133] [THERMAL EST subdev 1] [ 1.136594] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.136596] THERMAL EST: thz register success. [ 1.136753] THERMAL EST: end of probe, return err: 0 [ 1.137883] sd: No Scsi addr parsed to reserve index [ 1.137983] hisi_sas: driver version v1.6 [ 1.144551] libphy: Fixed MDIO Bus: probed [ 1.145338] tun: Universal TUN/TAP device driver, 1.6 [ 1.145344] tun: (C) 1999-2004 Max Krasnyansky [ 1.146498] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.146504] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.146553] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.146557] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.146602] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.146606] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.146653] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.146657] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.147868] PPP generic driver version 2.4.2 [ 1.148078] PPP BSD Compression module registered [ 1.148085] PPP Deflate Compression module registered [ 1.148127] PPP MPPE Compression module registered [ 1.148135] NET: Registered protocol family 24 [ 1.148210] usbcore: registered new interface driver r8152 [ 1.148255] usbcore: registered new interface driver asix [ 1.148301] usbcore: registered new interface driver ax88179_178a [ 1.148338] usbcore: registered new interface driver cdc_ether [ 1.148385] usbcore: registered new interface driver net1080 [ 1.148421] usbcore: registered new interface driver cdc_subset [ 1.148453] usbcore: registered new interface driver zaurus [ 1.148502] usbcore: registered new interface driver cdc_ncm [ 1.148685] VFIO - User Level meta-driver version: 0.3 [ 1.150173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.150200] ehci-pci: EHCI PCI platform driver [ 1.150242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.150256] ohci-pci: OHCI PCI platform driver [ 1.150304] ohci-platform: OHCI generic platform driver [ 1.153082] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.153698] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.154973] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f944b800 id [ 1.157335] usbcore: registered new interface driver uas [ 1.157406] usbcore: registered new interface driver usb-storage [ 1.157538] usbcore: registered new interface driver usbserial [ 1.157991] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.158049] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.158077] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.158870] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.158932] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.159137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.159143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.159149] usb usb1: Product: xHCI Host Controller [ 1.159154] usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.159159] usb usb1: SerialNumber: 70090000.xusb [ 1.159780] hub 1-0:1.0: USB hub found [ 1.159825] hub 1-0:1.0: 5 ports detected [ 1.160375] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.160388] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.160537] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.160641] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.160647] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.160652] usb usb2: Product: xHCI Host Controller [ 1.160657] usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd [ 1.160661] usb usb2: SerialNumber: 70090000.xusb [ 1.161233] hub 2-0:1.0: USB hub found [ 1.161269] hub 2-0:1.0: 4 ports detected [ 1.162305] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.162313] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.163552] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.165226] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.165240] tegra-xudc-new 700d0000.xudc: vbus state: 1 [ 1.165257] tegra-xudc-new 700d0000.xudc: device mode on: 0 [ 1.165283] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.165311] tegra-xudc-new 700d0000.xudc: active: 0 => 1 [ 1.166082] mousedev: PS/2 mouse device common for all mice [ 1.166205] usbcore: registered new interface driver xpad [ 1.262297] usb usb1: usb_suspend_both: status 0 [ 1.262339] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.262464] usb usb2: usb_suspend_both: status 0 [ 1.264875] rtc rtc1: alarm rtc device [ 1.264896] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.264924] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.265628] i2c /dev entries driver [ 1.268013] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.268531] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.268541] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.269481] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.292828] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.292936] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.300594] imx219 7-0010: board setup failed [ 1.305038] imx219: probe of 7-0010 failed with error -121 [ 1.305632] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.328918] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.329011] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.336574] imx219 8-0010: board setup failed [ 1.341006] imx219: probe of 8-0010 failed with error -121 [ 1.342219] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.344942] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.344950] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.345432] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.345450] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.345461] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.345608] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.345619] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.345627] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.345782] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.345794] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.345801] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.346050] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.346853] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.346913] tegra_aotag tegra-aotag: Invalid temp readout [ 1.346941] tegra_aotag tegra-aotag: Invalid temp readout [ 1.346958] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.346967] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.347912] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.347934] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.348131] tegra_aotag tegra-aotag: Invalid temp readout [ 1.348164] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.348572] parse_throttle_dt_data: Num cap clks = 6 [ 1.348578] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.348593] parse_throttle_dt_data: clk=gpu type=4 [ 1.348621] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.348645] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.348670] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.348674] parse_throttle_dt_data: clk=emc type=3 [ 1.349074] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.349183] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.349341] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.350173] FAN dev name: pwm-fan [ 1.350262] FAN:gpio request success. [ 1.350337] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.350661] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.350835] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.350847] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.350963] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.350969] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.350975] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.350980] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.350985] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.350990] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.350995] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.351000] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.351005] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.351010] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.353848] device-mapper: uevent: version 1.0.3 [ 1.354359] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.360312] tegra210-cpufreq cpufreq: probe()...completed [ 1.361039] sdhci: Secure Digital Host Controller Interface driver [ 1.361041] sdhci: Copyright(c) Pierre Ossman [ 1.361043] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.361392] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.368445] tegra-se 70012000.se: tegra_se_probe: complete [ 1.368942] hidraw: raw HID events driver (C) Jiri Kosina [ 1.370077] usbcore: registered new interface driver usbhid [ 1.370079] usbhid: USB HID core driver [ 1.372174] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.372343] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.374198] nvpmodel: initialized successfully [ 1.375301] usbcore: registered new interface driver snd-usb-audio [ 1.375358] No Device Node present for smmu client: snd-soc-dummy !! [ 1.375363] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.375381] iommu: Adding device snd-soc-dummy to group 34 [ 1.381023] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.391099] OPE platform probe [ 1.391183] OPE platform probe successful [ 1.391208] OPE platform probe [ 1.391290] OPE platform probe successful [ 1.406009] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.415158] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.415292] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.415422] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.415551] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.415682] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.415808] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.415938] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.416063] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.416197] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.416324] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.428035] u32 classifier [ 1.428038] Actions configured [ 1.428113] Initializing XFRM netlink socket [ 1.428816] NET: Registered protocol family 10 [ 1.429480] NET: Registered protocol family 17 [ 1.429491] NET: Registered protocol family 15 [ 1.429564] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.429609] Bluetooth: RFCOMM socket layer initialized [ 1.429619] Bluetooth: RFCOMM ver 1.11 [ 1.429624] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.429628] Bluetooth: HIDP socket layer initialized [ 1.429648] 9pnet: Installing 9P2000 support [ 1.429690] Key type dns_resolver registered [ 1.430198] Registered cp15_barrier emulation handler [ 1.430205] Registered setend emulation handler [ 1.431265] registered taskstats version 1 [ 1.431788] Adding domain ve2-pd to PM domain host1x-pd [ 1.432038] Adding domain ve-pd to PM domain host1x-pd [ 1.434209] isp 54600000.isp: initialized [ 1.435217] isp 54680000.isp: initialized [ 1.445476] last reset is due to software reset [ 1.445480] KERNEL: PMC reset status reg: 0x3 [ 1.445540] BL: PMC reset status reg: 0x3 [ 1.445543] BL: PMIC poweroff Event Recorder: 0x0 [ 1.447066] clk_cbus_recalc_rate: no gbus parent [ 1.447071] clk_cbus_round_rate: no gbus parent [ 1.447074] clk_cbus_round_rate: no gbus parent [ 1.447081] clk_cbus_recalc_rate: no gbus parent [ 1.447176] clk_cbus_recalc_rate: no gbus parent [ 1.447180] clk_cbus_round_rate: no gbus parent [ 1.447182] clk_cbus_round_rate: no gbus parent [ 1.447185] clk_cbus_recalc_rate: no gbus parent [ 1.447874] tegra_dvfs: GPU-cap: registered [ 1.447929] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.447932] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 1.447934] tegra dvfs: vdd-gpu: nominal 1078mV, offset 708000uV, step 10000uV, scaling enabled [ 1.449332] tegra_dvfs: vdd-gpu-vts: registered [ 1.450063] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.450745] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.451290] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.461174] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.461473] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.461595] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.465721] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.469857] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.472420] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.482610] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:09:07 UTC (946688947) [ 1.483679] vi 54080000.vi: vi_probe: ++ [ 1.486659] vi 54080000.vi: initialized [ 1.488670] vi 54080000.vi: subdev nvcsi--2 bound [ 1.488774] vi 54080000.vi: subdev nvcsi--1 bound [ 1.489004] mmcblk mmc0:0001: Card claimed for testing. [ 1.490397] Disable partitions left on by BL [ 1.490400] disb [ 1.490450] bwmgr: missing cdev-type property [ 1.490548] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.490555] DRAM derating cdev registered. [ 1.491501] ALSA device list: [ 1.491504] #0: tegra-hda at 0x70038000 irq 81 [ 1.491506] #1: tegra-snd-t210ref-mobile-rt565x [ 1.494538] Freeing unused kernel memory: 8576K [ 1.496104] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.518649] Root device found: mmcblk0p1 [ 1.520071] Found dev node: /dev/mmcblk0p1 [ 1.689281] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 1.689284] EXT4-fs (mmcblk0p1): recovery complete [ 1.702632] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.704549] Rootfs mounted over mmcblk0p1 [ 1.718659] Switching from initrd to actual rootfs [ 1.805591] systemd[1]: System time before build time, advancing clock. [ 1.819607] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.830899] cgroup: cgroup2: unknown option "nsdelegate" [ 1.844087] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.844859] systemd[1]: Detected architecture arm64. [ 1.867904] systemd[1]: Set hostname to . [ 1.903985] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.943274] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.943283] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.039126] random: systemd: uninitialized urandom read (16 bytes read) [ 2.040427] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.040531] random: systemd: uninitialized urandom read (16 bytes read) [ 2.042124] systemd[1]: Created slice User and Session Slice. [ 2.042176] random: systemd: uninitialized urandom read (16 bytes read) [ 2.042946] systemd[1]: Created slice System Slice. [ 2.043016] systemd[1]: Reached target Slices. [ 2.043195] systemd[1]: Listening on RPCbind Server Activation Socket. [ 2.091080] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.097979] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.097983] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.165464] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.168354] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.168375] cpu-throttle-alert cooling device registered. [ 2.168511] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.168526] gpu-throttle-alert cooling device registered. [ 2.168667] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.168681] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.168695] hot-surface-alert cooling device registered. [ 2.317954] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.319990] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.406463] systemd-journald[1992]: Received request to flush runtime journal from PID 1 [ 2.425342] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.425350] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.425354] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.425358] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.425363] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.425385] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.425446] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.425611] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.425731] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.425755] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.425785] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.425805] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.426013] pci 0000:01:00.0: supports D1 D2 [ 2.426017] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.438002] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.438036] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.438041] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.438049] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.438067] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.438084] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.438091] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.438096] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.438102] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.438365] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.438369] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.438375] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.438476] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.438654] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.438670] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.460534] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.460604] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:2f:b5:b9 from device tree [ 2.463555] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.463572] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.777102] using random self ethernet address [ 2.785901] using random host ethernet address [ 3.165961] tegra-xusb 70090000.xusb: entering ELPG [ 3.167164] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0 [ 3.167423] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 3.168388] tegra-xusb 70090000.xusb: entering ELPG done [ 3.407048] Mass Storage Function, version: 2009/09/11 [ 3.407054] LUN: removable file: (no medium) [ 3.413595] random: crng init done [ 3.417000] random: 7 urandom warning(s) missed due to ratelimiting [ 3.429630] using random self ethernet address [ 3.434168] using random host ethernet address [ 3.460267] rndis0: HOST MAC 3a:45:73:0d:e2:20 [ 3.460320] rndis0: MAC 3a:45:73:0d:e2:21 [ 3.460790] usb0: HOST MAC 3a:45:73:0d:e2:22 [ 3.460818] usb0: MAC 3a:45:73:0d:e2:23 [ 3.460848] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 3.473788] l4tbr0: port 1(rndis0) entered blocking state [ 3.473794] l4tbr0: port 1(rndis0) entered disabled state [ 3.474540] device rndis0 entered promiscuous mode [ 3.480601] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 3.485678] l4tbr0: port 2(usb0) entered blocking state [ 3.485683] l4tbr0: port 2(usb0) entered disabled state [ 3.486477] device usb0 entered promiscuous mode [ 3.494590] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 3.718355] android_work: did not send uevent (0 0 (null)) [ 3.791329] android_work: sent uevent USB_STATE=CONNECTED [ 3.846336] android_work: sent uevent USB_STATE=DISCONNECTED [ 3.939270] android_work: sent uevent USB_STATE=CONNECTED [ 3.942564] configfs-gadget gadget: high-speed config #1: c [ 3.942593] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled [ 3.942610] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled [ 3.942625] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled [ 3.942718] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled [ 3.942736] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled [ 3.942750] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled [ 3.942783] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled [ 3.942801] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled [ 3.942823] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled [ 3.942864] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 3.943092] android_work: sent uevent USB_STATE=CONFIGURED [ 3.948412] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 3.948430] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 3.948685] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 3.949220] tegra-xudc-new 700d0000.xudc: ep 13 disabled [ 3.949307] tegra-xudc-new 700d0000.xudc: ep 8 disabled [ 3.967368] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled [ 3.967386] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled [ 4.031873] zram: Added device: zram0 [ 4.032370] zram: Added device: zram1 [ 4.038628] zram: Added device: zram2 [ 4.042244] zram: Added device: zram3 [ 4.097575] zram0: detected capacity change from 0 to 519426048 [ 4.170877] Adding 507248k swap on /dev/zram0. Priority:5 extents:1 across:507248k SS [ 4.190820] zram1: detected capacity change from 0 to 519426048 [ 4.217233] Adding 507248k swap on /dev/zram1. Priority:5 extents:1 across:507248k SS [ 4.221023] zram2: detected capacity change from 0 to 519426048 [ 4.270156] Adding 507248k swap on /dev/zram2. Priority:5 extents:1 across:507248k SS [ 4.273388] zram3: detected capacity change from 0 to 519426048 [ 4.279028] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.280143] eth0: 0xffffff800ab4f000, 48:b0:2d:2f:b5:b9, IRQ 405 [ 4.299456] Adding 507248k swap on /dev/zram3. Priority:5 extents:1 across:507248k SS [ 4.456199] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.128578] tegradc tegradc.1: blank - powerdown [ 5.716984] fuse init (API version 7.26) [ 8.849594] l4tbr0: port 2(usb0) entered blocking state [ 8.849600] l4tbr0: port 2(usb0) entered forwarding state [ 8.849655] l4tbr0: port 1(rndis0) entered blocking state [ 8.849659] l4tbr0: port 1(rndis0) entered forwarding state [ 8.851278] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 8.851308] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 11.486049] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.486061] Bluetooth: BNEP socket layer initialized [ 31.860189] vdd-fan: disabling [ 31.860230] vdd-usb-vbus: disabling [ 31.860261] vdd-usb-vbus2: disabling [ 31.860338] vddio-sdmmc-ap: disabling [ 31.860683] vddio-sdmmc3-ap: disabling [ 31.860925] vdd-3v3-sd: disabling [ 31.860964] vdd-usb-hub-en: disabling root@linux:/sys/kernel/debug#