[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (arm1@arm1-pc) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #6 SMP PREEMPT Mon Sep 13 15:59:31 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06b1000 [ 0.000000] Found lut_mem: 00002008@a06ae000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06b1000 lut_mem=0x2008@0xa06ae000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29988(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182332K/8124404K available (15358K kernel code, 2958K rwdata, 6712K rodata, 8640K init, 610K bss, 188408K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009620000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009620000 - 0xffffff8009e90000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e90000 - 0xffffff800a173808 ( 2959 KB) [ 0.000000] .bss : 0xffffff800a173808 - 0xffffff800a20c054 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000790] Console: colour dummy device 80x25 [ 0.000802] console [tty0] enabled [ 0.000809] bootconsole [tegra_comb_uart0] disabled [ 0.000823] kmemleak: Kernel memory leak detector disabled [ 0.000842] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000857] pid_max: default: 32768 minimum: 301 [ 0.001909] Security Framework initialized [ 0.002482] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002492] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004128] ftrace: allocating 47236 entries in 185 pages [ 0.405076] sched-energy: Sched-energy-costs installed from DT [ 0.405095] ASID allocator initialised with 65536 entries [ 0.442318] tegra-id: chipid=21917. [ 0.442329] tegra-id: opt_subrevision=1. [ 0.442356] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.442377] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.442387] DTB Build time: Sep 13 2021 15:41:18 [ 0.490640] CPU1: Booted secondary processor [4e0f0040] [ 0.522659] CPU2: Booted secondary processor [4e0f0040] [ 0.554789] CPU3: Booted secondary processor [4e0f0040] [ 0.587067] CPU4: Booted secondary processor [4e0f0040] [ 0.619110] CPU5: Booted secondary processor [4e0f0040] [ 0.619337] Brought up 6 CPUs [ 0.619353] SMP: Total of 6 processors activated. [ 0.619392] CPU features: detected feature: Privileged Access Never [ 0.619402] CPU features: detected feature: LSE atomic instructions [ 0.619410] CPU features: detected feature: User Access Override [ 0.619418] CPU features: detected feature: 32-bit EL0 Support [ 0.620868] CPU: All CPU(s) started at EL2 [ 0.620917] alternatives: patching kernel code [ 0.627334] devtmpfs: initialized [ 0.670804] Initilizing CustomIPI irq domain [ 0.671100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.671122] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.682882] pinctrl core: initialized pinctrl subsystem [ 0.683136] OS set in device tree is not L4T. [ 0.683506] regulator-dummy: no parameters [ 0.683785] Initializing plugin-manager [ 0.683851] Plugin module not found [ 0.683897] Plugin-manager status disabled [ 0.684973] NET: Registered protocol family 16 [ 0.686299] pstore: using zlib compression [ 0.686350] console [pstore-1] enabled [ 0.686359] pstore: Registered ramoops as persistent store backend [ 0.686368] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.705841] cpuidle: using governor menu [ 0.706767] bpmp: waiting for handshake [ 0.706778] bpmp: handshake completed [ 0.706798] bpmp: synchronizing channels [ 0.706809] bpmp: channels synchronized [ 0.706818] bpmp: mail init ok [ 0.709323] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.709517] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.709524] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.709531] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.709537] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.709544] t19x-arm-smmu 12000000.iommu: nested translation [ 0.709579] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.709586] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.709593] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.709601] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.709607] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.713156] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e94000) [ 0.713188] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.715705] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.717189] tegra_aon_clk_init: ok [ 0.717206] Registering BPMP clocks... [ 0.717312] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.717966] Serial: AMBA PL011 UART driver [ 0.718136] tegra_powergate_init: DONE [ 0.719247] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.719257] DTB Build time: Sep 13 2021 15:41:18 [ 0.722378] Tegra reboot handler registered. [ 0.730404] iommu: Adding device 14160000.pcie to group 0 [ 0.731080] iommu: Adding device 141a0000.pcie to group 1 [ 0.732558] iommu: Adding device 2490000.ether_qos to group 2 [ 0.733062] iommu: Adding device 3100000.serial to group 3 [ 0.733527] iommu: Adding device 3110000.serial to group 4 [ 0.733891] iommu: Adding device 3140000.serial to group 5 [ 0.734531] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.734802] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.734819] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.734824] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.734828] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.734871] tegra-pmc: PMC Prod config success [ 0.735074] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.735086] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.735495] iommu: Adding device 3460000.sdhci to group 6 [ 0.736048] iommu: Adding device 3440000.sdhci to group 7 [ 0.736620] iommu: Adding device 3400000.sdhci to group 8 [ 0.737112] iommu: Adding device 3210000.spi to group 9 [ 0.737499] iommu: Adding device 3230000.spi to group 10 [ 0.737907] iommu: Adding device 3270000.spi to group 11 [ 0.739017] iommu: Adding device 3160000.i2c to group 12 [ 0.739415] iommu: Adding device c240000.i2c to group 13 [ 0.739818] iommu: Adding device 3180000.i2c to group 14 [ 0.740193] iommu: Adding device 3190000.i2c to group 15 [ 0.740846] iommu: Adding device 31b0000.i2c to group 16 [ 0.741425] iommu: Adding device 31c0000.i2c to group 17 [ 0.741796] iommu: Adding device c250000.i2c to group 18 [ 0.742237] iommu: Adding device 31e0000.i2c to group 19 [ 0.742818] iommu: Adding device sound to group 20 [ 0.743338] iommu: Adding device 3510000.hda to group 21 [ 0.743877] iommu: Adding device bc00000.rtcpu to group 22 [ 0.745902] iommu: Adding device 13e10000.host1x to group 23 [ 0.746327] iommu: Adding device 13e10000.host1x:ctx0 to group 24 [ 0.746703] iommu: Adding device 13e10000.host1x:ctx1 to group 25 [ 0.747112] iommu: Adding device 13e10000.host1x:ctx2 to group 26 [ 0.747448] iommu: Adding device 13e10000.host1x:ctx3 to group 27 [ 0.747900] iommu: Adding device 13e10000.host1x:ctx4 to group 28 [ 0.748245] iommu: Adding device 13e10000.host1x:ctx5 to group 29 [ 0.748639] iommu: Adding device 13e10000.host1x:ctx6 to group 30 [ 0.749045] iommu: Adding device 13e10000.host1x:ctx7 to group 31 [ 0.749540] iommu: Adding device 15340000.vic to group 32 [ 0.749998] iommu: Adding device 15380000.nvjpg to group 33 [ 0.750384] iommu: Adding device 15500000.tsec to group 34 [ 0.750670] iommu: Adding device 15100000.tsecb to group 35 [ 0.750956] iommu: Adding device 15480000.nvdec to group 36 [ 0.751210] iommu: Adding device 15140000.nvdec1 to group 37 [ 0.751544] iommu: Adding device 154c0000.nvenc to group 38 [ 0.751840] iommu: Adding device 15a80000.nvenc1 to group 39 [ 0.752260] iommu: Adding device 15880000.nvdla0 to group 40 [ 0.752702] iommu: Adding device 158c0000.nvdla1 to group 41 [ 0.753314] iommu: Adding device 15200000.nvdisplay to group 42 [ 0.753494] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06b1000(800000) [ 0.753506] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06ae000(3000) [ 0.757439] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.757521] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.758051] iommu: Adding device 15210000.nvdisplay to group 43 [ 0.758096] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.759800] iommu: Adding device 15c10000.vi to group 44 [ 0.759938] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.760341] iommu: Adding device 14800000.isp to group 45 [ 0.761305] iommu: Adding device 16000000.pva0 to group 46 [ 0.761887] iommu: Adding device 16800000.pva1 to group 47 [ 0.762303] iommu: Adding device 15810000.se to group 48 [ 0.762681] iommu: Adding device 15820000.se to group 49 [ 0.762995] iommu: Adding device 15830000.se to group 50 [ 0.763282] iommu: Adding device 15840000.se to group 51 [ 0.763572] iommu: Adding device c1a0000.aon to group 52 [ 0.765123] iommu: Adding device d000000.bpmp to group 53 [ 0.765428] bpmp: ping status is 0 [ 0.765581] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.768750] bpmp d000000.bpmp: probe ok [ 0.770513] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.770966] iommu: Adding device smmu_test to group 54 [ 0.771953] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.771973] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.771992] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.772011] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.772026] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.772039] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.772053] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.772066] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.772079] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.772095] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.772110] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.772124] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.772137] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.772151] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.772166] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.772182] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.772195] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.772259] mc-err: mcerr ops are set to t19x [ 0.777954] iommu: Adding device 2600000.dma to group 55 [ 0.782743] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.783892] GPIO line 339 (wifi-enable) hogged as output/high [ 0.783932] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.783968] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.784301] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.791694] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.791759] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.791793] GPIO line 266 (w-disable1) hogged as output/high [ 0.791824] GPIO line 264 (w-disable2) hogged as output/high [ 0.791856] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.792183] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.794586] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.794598] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.794607] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.795406] iommu: Adding device 3550000.xudc to group 56 [ 0.796073] iommu: Adding device 3610000.xhci to group 57 [ 0.798171] arm64_ras arm64_ras: probed [ 0.798548] ras_fhi_enable: FHI 471 enabled on CPU0 [ 0.798583] ras_fhi_enable: FHI 472 enabled on CPU1 [ 0.798644] ras_fhi_enable: FHI 473 enabled on CPU2 [ 0.798709] ras_fhi_enable: FHI 474 enabled on CPU3 [ 0.798776] ras_fhi_enable: FHI 475 enabled on CPU4 [ 0.798828] ras_fhi_enable: FHI 476 enabled on CPU5 [ 0.799000] carmel_ras_enable: RAS enabled on cpu0 [ 0.799185] carmel_ras_enable: RAS enabled on cpu1 [ 0.799363] carmel_ras_enable: RAS enabled on cpu2 [ 0.799544] carmel_ras_enable: RAS enabled on cpu3 [ 0.799741] carmel_ras_enable: RAS enabled on cpu4 [ 0.799914] carmel_ras_enable: RAS enabled on cpu5 [ 0.800000] carmel_ras carmel_ras: probed [ 0.800983] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.801536] tegra-cbb c600000.aon-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.802307] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.803073] tegra-cbb be00000.rce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.803789] tegra-cbb b600000.sce-noc: noc_secure_irq = 488, noc_nonsecure_irq = 487> [ 0.804146] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.805358] vdd-ac-bat: 5000 mV [ 0.805792] vdd-sdmmc3-sw: 3300 mV [ 0.806106] vdd-1v8-sd: 1800 mV [ 0.806407] vdd-3v3-cvb: 3300 mV [ 0.806690] vdd-1v8-cvb: 1800 mV [ 0.807046] vdd-epb-1v0: 1000 mV [ 0.807226] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.807516] avdd-cam-2v8: 2800 mV [ 0.807801] vdd-fan: 5000 mV [ 0.808140] vdd-hdmi-5v0: 5000 mV [ 0.808481] vdd_sys_en: 1200 mV [ 0.842008] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.846256] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.846618] SCSI subsystem initialized [ 0.846850] libata version 3.00 loaded. [ 0.847096] usbcore: registered new interface driver usbfs [ 0.847172] usbcore: registered new interface driver hub [ 0.847213] usbcore: registered new device driver usb [ 0.858644] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.861391] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.870975] vdd-1v0: at 1000 mV [ 0.875005] vdd-1v8-hs: at 1800 mV [ 0.877534] vdd-1v8-ls: at 1800 mV [ 0.881563] vdd-1v8-ao: at 1800 mV [ 0.885606] vddio-ddr-1v1: at 1100 mV [ 0.889360] vdd-rtc: at 800 mV [ 0.890518] spmic-ldo1: at 2375 mV [ 0.897404] vdd-ao-3v3: at 3300 mV [ 0.905462] vddio-emmc-3v3: at 3300 mV [ 0.906709] spmic-ldo4: at 1587 mV [ 0.913486] vdd-usb-3v3: at 3300 mV [ 0.921553] vddio-sdmmc1-3v3: at 3300 mV [ 0.925549] vdd-csi-1v2: at 1200 mV [ 0.927133] spmic-ldo8: at 1800 mV [ 0.932003] GPIO line 246 (gpio_default) hogged as output/high [ 0.933385] GPIO line 247 (gpio_default) hogged as output/high [ 0.933734] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.934046] max77620 4-003c: max77620 probe successful [ 0.934552] media: Linux media interface: v0.10 [ 0.934606] Linux video capture interface: v2.00 [ 0.935914] pps_core: LinuxPPS API ver. 1 registered [ 0.935927] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.935962] PTP clock support registered [ 0.936229] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.936478] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.936512] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.938978] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.939052] trusty trusty: selected api version: 3 (requested 3) [ 0.940099] Advanced Linux Sound Architecture Driver Initialized. [ 0.940634] Bluetooth: Core ver 2.22 [ 0.940682] NET: Registered protocol family 31 [ 0.940692] Bluetooth: HCI device and connection manager initialized [ 0.940706] Bluetooth: HCI socket layer initialized [ 0.940732] Bluetooth: L2CAP socket layer initialized [ 0.940794] Bluetooth: SCO socket layer initialized [ 0.943361] camchar: rtcpu character device driver loaded [ 0.944091] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.944191] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.945859] clocksource: Switched to clocksource arch_sys_counter [ 0.990875] VFS: Disk quotas dquot_6.6.0 [ 0.990984] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.991437] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.992975] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.993029] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.993291] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.993299] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.993324] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.993332] nvmap_page_pool_init: Total RAM pages: 1983999 [ 0.993338] nvmap_page_pool_init: nvmap page pool size: 247999 pages (968 MB) [ 0.993544] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.994085] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.996374] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.010489] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.010829] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.011112] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.011332] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.011543] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.012804] la/ptsa driver initialized. [ 1.013143] NET: Registered protocol family 2 [ 1.013946] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.014280] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.014851] TCP: Hash tables configured (established 65536 bind 65536) [ 1.014894] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.015018] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.015377] NET: Registered protocol family 1 [ 1.016034] RPC: Registered named UNIX socket transport module. [ 1.016041] RPC: Registered udp transport module. [ 1.016045] RPC: Registered tcp transport module. [ 1.016050] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.016061] PCI: CLS 0 bytes, default 64 [ 1.016334] Trying to unpack rootfs image as initramfs... [ 1.242664] Freeing initrd memory: 7068K [ 1.262405] random: fast init done [ 1.266592] host1x 13e10000.host1x: initialized [ 1.269352] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.274151] audit: initializing netlink subsys (disabled) [ 1.274192] audit: type=2000 audit(0.896:1): initialized [ 1.274933] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.285367] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.286705] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.287462] 9p: Installing v9fs 9p2000 file system support [ 1.292262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.292370] io scheduler noop registered [ 1.292598] io scheduler cfq registered (default) [ 1.296349] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.330609] iommu: Adding device 2993000.adsp to group 58 [ 1.383416] iommu: Adding device aconnect@2a41000:adsp_audio to group 59 [ 1.383596] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.396623] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.397123] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.397765] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.398219] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.398637] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.401767] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.401993] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.405160] tsec 15500000.tsec: initialized [ 1.406763] tsec 15100000.tsecb: initialized [ 1.410850] nvdec 15480000.nvdec: initialized [ 1.413469] nvdec 15140000.nvdec1: initialized [ 1.420139] falcon 15340000.vic: initialized [ 1.421910] falcon 15380000.nvjpg: initialized [ 1.423720] falcon 154c0000.nvenc: initialized [ 1.425391] falcon 15a80000.nvenc1: initialized [ 1.428371] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.430396] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.432088] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.433928] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.435657] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.437204] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.438775] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.440272] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.443821] t194-nvcsi 15a00000.nvcsi: initialized [ 1.448847] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.449165] scare-pigeon 14b00000.isp-thi: initialized [ 1.454813] pva 16000000.pva0: initialized [ 1.460617] pva 16800000.pva1: initialized [ 1.465310] nvdla 15880000.nvdla0: initialized [ 1.470165] nvdla 158c0000.nvdla1: initialized [ 1.471288] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.471302] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.471335] tegradccommon 15200000.dc_common: dma mapping done [ 1.472187] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.472216] generic_infoframe_type: 0x87 [ 1.472278] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.472304] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.476301] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.476308] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.476314] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.476494] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.476504] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.477336] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.479640] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.479650] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.482880] tegradc 15200000.nvdisplay: probed [ 1.519437] Console: switching to colour frame buffer device 240x67 [ 1.519573] tegradc 15200000.nvdisplay: fb registered [ 1.519936] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.520540] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.520623] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.525753] Parent Clock set for DC plld2 [ 1.580762] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.581504] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.581522] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.607347] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.607354] Extcon AUX1(HDMI) enable [ 1.607847] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.607880] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.607959] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.608010] tegradc 15210000.nvdisplay: Display dc.ffffff800be50000 registered with id=1 [ 1.608261] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.608272] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.617006] tegradc 15210000.nvdisplay: probed [ 1.617349] tegradc 15210000.nvdisplay: fb registered [ 1.621343] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.622612] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.624118] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.625643] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.625714] tegradc 15210000.nvdisplay: dp: Failed for I2C write addr:80, size:1, stat:0x10000100 [ 1.625882] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.626384] Parent Clock set for DC pll_d [ 1.630754] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.632232] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.633732] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.635247] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.635293] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.636017] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.637495] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.638993] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.640486] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.640543] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.641245] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.642570] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.644049] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.645548] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.645588] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.646311] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.647791] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.649283] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.650557] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.650596] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.650641] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 1.650714] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.650722] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.651027] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=79 [ 1.651037] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.651292] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.651461] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.651619] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.651629] tegra_cec 3960000.tegra_cec: probed [ 1.660493] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.661213] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.661220] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.661520] kfuse 3830000.kfuse: initialized [ 1.667201] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.669823] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.671008] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.671889] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.675976] console [ttyTCU0] enabled [ 1.676289] [drm] Initialized [ 1.688510] brd: module loaded [ 1.694334] loop: module loaded [ 1.694477] new_mcu 1-0038: nvidia new_mcu i2c_probe [ 1.694484] new_mcu 1-0038: new_mcu 1==============795 [ 1.720642] new_mcu 1-0038: new_mcu 1==============802 [ 1.741060] tegradc 15200000.nvdisplay: blank - powerdown [ 1.764348] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.764358] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.769911] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.770614] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.772123] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.773624] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.775133] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.775142] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.775860] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.777386] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.778929] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.780431] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.780439] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.781112] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.781118] Extcon AUX1(HDMI) disable [ 1.781182] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.782465] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.783486] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.784399] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.784404] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.785000] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.785991] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.786997] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.787912] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.787918] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.787924] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 1.787930] hpd: edid read prepare failed [ 1.787931] hpd: DC from connected to disconnected [ 1.820823] tegradc 15200000.nvdisplay: unblank [ 1.829191] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.829462] tegra_profiler: auth: init [ 1.830277] THERMAL EST: found 3 subdevs [ 1.830282] THERMAL EST num_resources: 0 [ 1.830287] [THERMAL EST subdev 0] [ 1.830317] [THERMAL EST subdev 1] [ 1.830322] [THERMAL EST subdev 2] [ 1.830330] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.830686] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.830689] THERMAL EST: thz register success. [ 1.830903] THERMAL EST: end of probe, return err: 0 [ 1.831645] sd: No Scsi addr parsed to reserve index [ 1.831740] hisi_sas: driver version v1.6 [ 1.842324] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.842331] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.842339] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.842653] 1 ofpart partitions found on MTD device spi6.0 [ 1.842657] Creating 1 MTD partitions on "spi6.0": [ 1.842673] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.846123] libphy: Fixed MDIO Bus: probed [ 1.848414] tun: Universal TUN/TAP device driver, 1.6 [ 1.848417] tun: (C) 1999-2004 Max Krasnyansky [ 1.849214] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.849217] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.849308] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.849311] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.849398] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.849401] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.849520] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.849523] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.093025] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 2.093584] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 37 fe bf [ 2.093597] Using phyrst_lpmode = 1 from DT [ 2.093758] libphy: dwc_phy: probed [ 2.096462] PPP generic driver version 2.4.2 [ 2.096775] PPP BSD Compression module registered [ 2.096787] PPP Deflate Compression module registered [ 2.096808] PPP MPPE Compression module registered [ 2.096817] NET: Registered protocol family 24 [ 2.096879] usbcore: registered new interface driver r8152 [ 2.096932] usbcore: registered new interface driver asix [ 2.097013] usbcore: registered new interface driver ax88179_178a [ 2.097054] usbcore: registered new interface driver cdc_ether [ 2.097104] usbcore: registered new interface driver net1080 [ 2.097180] usbcore: registered new interface driver cdc_subset [ 2.097227] usbcore: registered new interface driver zaurus [ 2.097300] usbcore: registered new interface driver cdc_ncm [ 2.097344] usbcore: registered new interface driver qmi_wwan_longsung [ 2.097366] GobiNet: Quectel_WCDMA<E_Linux&Android_GobiNet_Driver_V1.3.0 [ 2.097405] usbcore: registered new interface driver GobiNet [ 2.097722] VFIO - User Level meta-driver version: 0.3 [ 2.098949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.098976] ehci-pci: EHCI PCI platform driver [ 2.099031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.099047] ohci-pci: OHCI PCI platform driver [ 2.099100] ohci-platform: OHCI generic platform driver [ 2.104023] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 2.105951] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f5714000 id [ 2.106493] usbcore: registered new interface driver cdc_wdm [ 2.106701] usbcore: registered new interface driver uas [ 2.106772] usbcore: registered new interface driver usb-storage [ 2.106875] usbcore: registered new interface driver usbserial [ 2.106914] usbcore: registered new interface driver option [ 2.106943] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.108288] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 2.108320] tegra-xusb 3610000.xhci: xHCI Host Controller [ 2.108340] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 2.109039] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 2.109083] tegra-xusb 3610000.xhci: irq 466, io mem 0x03610000 [ 2.109272] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.109278] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.109283] usb usb1: Product: xHCI Host Controller [ 2.109288] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 2.109293] usb usb1: SerialNumber: 3610000.xhci [ 2.109801] hub 1-0:1.0: USB hub found [ 2.109888] hub 1-0:1.0: 4 ports detected [ 2.110586] tegra-xusb 3610000.xhci: xHCI Host Controller [ 2.110597] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 2.110633] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 2.110859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.110866] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.110871] usb usb2: Product: xHCI Host Controller [ 2.110877] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 2.110882] usb usb2: SerialNumber: 3610000.xhci [ 2.111351] hub 2-0:1.0: USB hub found [ 2.111388] hub 2-0:1.0: 4 ports detected [ 2.111888] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 2.111971] tegra-xudc-new 3550000.xudc: device count: 1 [ 2.112235] Wake76 for irq=199 [ 2.112244] Wake77 for irq=199 [ 2.112251] Wake78 for irq=199 [ 2.112257] Wake79 for irq=199 [ 2.112263] Wake80 for irq=199 [ 2.112269] Wake81 for irq=199 [ 2.112275] Wake82 for irq=199 [ 2.112342] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 2.112348] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 2.112855] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 2.112875] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 2.113091] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 2.113101] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 2.113892] mousedev: PS/2 mouse device common for all mice [ 2.113991] usbcore: registered new interface driver xpad [ 2.214592] usb usb2: usb_suspend_both: status 0 [ 2.244883] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.246247] Wake73 for irq=42 [ 2.247575] rtc rtc1: alarm rtc device [ 2.247590] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.247616] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.247721] i2c /dev entries driver [ 2.250321] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.250704] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.250709] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.251138] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.274634] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.274692] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.274793] imx219 9-0010: board setup failed [ 2.274871] imx219: probe of 9-0010 failed with error -121 [ 2.275232] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.298480] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.298526] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.298637] imx219 10-0010: board setup failed [ 2.298707] imx219: probe of 10-0010 failed with error -121 [ 2.299723] max77620-power max20024-power: Event recorder REG_NVERC : 0x54 [ 2.306523] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.306950] FAN dev name: pwm-fan [ 2.307007] FAN:gpio request success. [ 2.307015] FAN: can't find tach_gpio [ 2.307024] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.307080] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.307348] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.307354] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.307893] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.307899] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.307905] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.307910] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.307915] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.307920] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.307925] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.307930] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.307937] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.307942] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.308707] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.309624] device-mapper: uevent: version 1.0.3 [ 2.310077] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.313696] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.314881] cpuidle: Initializing cpuidle driver [ 2.315898] sdhci: Secure Digital Host Controller Interface driver [ 2.315900] sdhci: Copyright(c) Pierre Ossman [ 2.315903] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.317486] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.319749] CMDQ: cmdq_platfm_init successful [ 2.321019] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 2.323405] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 323 [ 2.325339] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.326131] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.327794] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 248 [ 2.331889] tegra-se-nvhost 15810000.se: initialized [ 2.332910] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.333517] tegra-se-nvhost 15820000.se: initialized [ 2.334574] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.335198] tegra-se-nvhost 15830000.se: initialized [ 2.335940] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.336523] tegra-se-nvhost 15840000.se: initialized [ 2.337385] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.338479] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.338600] hidraw: raw HID events driver (C) Jiri Kosina [ 2.340526] usbcore: registered new interface driver usbhid [ 2.340528] usbhid: USB HID core driver [ 2.344773] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.345821] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.346254] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.346863] denver_knobs_init:MTS_VERSION:53250041 [ 2.347116] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.348112] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.348478] t19x_cache tegra-cache: probed [ 2.350569] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.350594] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.351070] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.351439] PLL_AON clock registered [ 2.354411] Clocks initialized successfully [ 2.356422] nvpmodel: initialized successfully [ 2.357697] trusty-virtio trusty:virtio: initializing [ 2.357969] trusty_ipc virtio0: vring0: va(pa) ffffffc1f5bc8000(0) qsz 32 notifyid 1 [ 2.357978] trusty_ipc virtio0: vring1: va(pa) ffffffc1f5bca000(0) qsz 32 notifyid 2 [ 2.358121] trusty-virtio trusty:virtio: initializing done [ 2.358306] trusty_ipc virtio0: is online [ 2.359351] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.359776] usbcore: registered new interface driver snd-usb-audio [ 2.360173] es8316_i2c_probe 1160========================================= [ 2.360177] es8316_i2c_probe 1165========================================= [ 2.360231] es8316_i2c_probe 1179========================================= [ 2.360241] es8316_i2c_probe 1234========================================= ret:0 [ 2.365889] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.373915] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.377503] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.377834] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.378026] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.378072] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.378096] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.378316] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.411966] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.425096] mmc0: periodic cache flush enabled [ 2.425108] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.425578] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.425799] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.426912] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.428008] OPE platform probe [ 2.428103] OPE platform probe successful [ 2.431164] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.431703] tegra_machine_driver_probe===========8316================== 771 [ 2.431716] add_dai_links===========8316================== 713 [ 2.432561] codec_init===========8316================== 635 [ 2.436114] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.441934] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 2.462288] usb 1-3: New USB device found, idVendor=1a40, idProduct=0201 [ 2.462293] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.462297] usb 1-3: Product: USB 2.0 Hub [MTT] [ 2.463068] hub 1-3:1.0: USB hub found [ 2.463168] hub 1-3:1.0: 7 ports detected [ 2.496947] es8316_probe 1068========================================= [ 2.496989] es8316_probe 1080========================================= [ 2.630480] es8316_probe 1112=========================================ret:0 [ 2.635145] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.635275] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.635396] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.635515] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.635677] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.635824] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.635976] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.636092] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.636224] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.636349] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.636461] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.636575] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.636709] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.636827] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.636942] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.637048] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.637145] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.637248] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.637347] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.637445] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.641429] tegra_machine_es8316_init===========8316==================(577) [ 2.669398] u32 classifier [ 2.669400] Actions configured [ 2.669487] Initializing XFRM netlink socket [ 2.670194] NET: Registered protocol family 10 [ 2.670955] NET: Registered protocol family 17 [ 2.670967] NET: Registered protocol family 15 [ 2.671026] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.671043] 9pnet: Installing 9P2000 support [ 2.671089] Key type dns_resolver registered [ 2.671348] Registered cp15_barrier emulation handler [ 2.671360] Registered setend emulation handler [ 2.673089] registered taskstats version 1 [ 2.673385] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.674664] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.674684] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.674691] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.674697] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.677926] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.677931] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.753893] usb 1-3.6: new high-speed USB device number 3 using tegra-xusb [ 2.774548] usb 1-3.6: New USB device found, idVendor=0bda, idProduct=b720 [ 2.774552] usb 1-3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.774572] usb 1-3.6: Product: 802.11n WLAN Adapter [ 2.774574] usb 1-3.6: Manufacturer: Realtek [ 2.774577] usb 1-3.6: SerialNumber: 00e04c000001 [ 2.785894] tegra-pcie-dw 14160000.pcie: link is up [ 2.786038] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.786045] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.786052] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.786057] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.786061] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.786087] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.786267] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.786537] iommu: Adding device 0004:00:00.0 to group 60 [ 2.786841] pci 0004:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.786952] pci 0004:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.786956] pci 0004:01:00.0: reg 0x10: [io size 0x0100] [ 2.787106] pci 0004:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.787205] pci 0004:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.787904] pci 0004:01:00.0: supports D1 D2 [ 2.787906] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.788274] iommu: Adding device 0004:01:00.0 to group 61 [ 2.798841] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.798846] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.798852] pci 0004:01:00.0: BAR 4: assigned [mem 0x1740000000-0x1740003fff 64bit] [ 2.798931] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740004000-0x1740004fff 64bit] [ 2.799008] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.799033] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.799037] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.799069] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.799086] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.799142] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.799369] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.799372] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.799377] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.799484] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.799810] r8168 0004:01:00.0: enabling device (0000 -> 0003) [ 2.799891] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.811095] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 2.811163] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 2.811622] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 2.812410] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 2.812508] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 2.814044] Parent Clock set for DC plld2 [ 2.814572] r8168 0004:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.814769] r8168 0004:01:00.0 (unnamed net_device) (uninitialized): bad mac address at /chosen/nvidia,ethernet-mac: missing. [ 2.814776] r8168 0004:01:00.0 (unnamed net_device) (uninitialized): Assigning random ethernet address 96:e3:94:e6:02:14 [ 2.815391] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.815407] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.815755] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.816069] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.816078] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.818203] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 2.819523] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 2.854021] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 2.854024] Extcon AUX1(HDMI) enable [ 2.869637] tegradc 15200000.nvdisplay: sync windows ret = 247 [ 2.913862] tegradc 15210000.nvdisplay: blank - powerdown [ 2.913909] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 2.913913] Extcon DP: HPD disabled [ 2.913917] hpd: hpd_switch 0 [ 2.913922] hpd: switching from state 2 (Check EDID) to state 3 (Disabled) [ 2.913969] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 2.913973] Extcon HDMI: HPD enabled [ 2.914023] tegradc 15200000.nvdisplay: hdmi: plugged [ 2.922400] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.922421] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.922429] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.922437] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.438098] tegra-pcie-dw 141a0000.pcie: link is down [ 3.438340] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.438348] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.438356] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.438362] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.438367] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.438392] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.438541] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.438814] iommu: Adding device 0005:00:00.0 to group 62 [ 3.439204] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.439226] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.439470] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.439479] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.439573] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.439735] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.439825] aer 0005:00:00.0:pcie002: unloading service driver aer [ 3.439901] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.440081] iommu: Removing device 0005:00:00.0 from group 62 [ 3.440145] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.441669] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.451457] tegra-cbb 14040000.cv-noc: noc_secure_irq = 92, noc_nonsecure_irq = 91> [ 3.454123] ####################75111############### [ 3.456642] gpiochip_setup_dev: registered GPIOs 220 to 239 on device: gpiochip3 (f75111_0x4e) [ 3.456649] Fintek,f75111 8-004e: 202108141636##########################ret:0,addr:4e [ 3.458625] ####################default_0x4e############### [ 3.458723] ####################75111############### [ 3.461174] gpiochip_setup_dev: registered GPIOs 200 to 219 on device: gpiochip4 (f75111_0x37) [ 3.461180] Fintek,f75111 8-0037: 202108141636##########################ret:0,addr:37 [ 3.461892] usb 1-3: USB disconnect, device number 2 [ 3.461899] usb 1-3.6: USB disconnect, device number 3 [ 3.464213] ####################default_0x37############### [ 3.466163] tegra194-isp5 14800000.isp: initialized [ 3.473607] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.478636] tegra194-vi5 15c10000.vi: initialized [ 3.483304] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.483426] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.483627] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.487844] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.487864] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.487868] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.487965] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.488008] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.488013] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.491809] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.491844] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.491850] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.492137] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.492179] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.492185] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.492531] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.492568] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.492573] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.492779] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.493522] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.571020] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.571370] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.571638] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.571867] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.572205] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.572278] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.572509] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (67) [ 3.572513] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.573397] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.573787] Wake83 for irq=211 [ 3.573886] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.573964] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.574140] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.606983] tegra_rtc c2a0000.rtc: setting system clock to 2021-09-13 08:30:47 UTC (1631521847) [ 3.607401] mmcblk mmc0:0001: Card claimed for testing. [ 3.647229] bpmp: mounted debugfs mirror [ 3.653368] ALSA device list: [ 3.653374] #0: tegra-hda-xnx at 0x3518000 irq 66 [ 3.653378] #1: jetson-xaviernx-ape [ 3.654666] Freeing unused kernel memory: 8640K [ 3.693548] Root device found: mmcblk0p1 [ 3.695662] Found dev node: /dev/mmcblk0p1 [ 3.766254] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 3.788955] usb 2-3: New USB device found, idVendor=05e3, idProduct=0626 [ 3.788962] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.788968] usb 2-3: Product: USB3.1 Hub [ 3.788991] usb 2-3: Manufacturer: GenesysLogic [ 3.792447] hub 2-3:1.0: USB hub found [ 3.792786] hub 2-3:1.0: 4 ports detected [ 3.834855] EXT4-fs (mmcblk0p1): 25 orphan inodes deleted [ 3.834861] EXT4-fs (mmcblk0p1): recovery complete [ 3.843545] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.846515] Rootfs mounted over mmcblk0p1 [ 3.872911] Switching from initrd to actual rootfs [ 3.905912] usb 1-3: new high-speed USB device number 4 using tegra-xusb [ 3.926319] usb 1-3: New USB device found, idVendor=1a40, idProduct=0201 [ 3.926342] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.926347] usb 1-3: Product: USB 2.0 Hub [MTT] [ 3.927179] hub 1-3:1.0: USB hub found [ 3.927242] hub 1-3:1.0: 7 ports detected [ 3.949914] usb 2-3: usb_suspend_both: status 0 [ 3.950136] usb usb2: usb_suspend_both: status 0 [ 3.998859] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.002523] cgroup: cgroup2: unknown option "nsdelegate" [ 4.011710] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.012339] systemd[1]: Detected architecture arm64. [ 4.017779] systemd[1]: Set hostname to . [ 4.099943] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.099956] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.189926] usb 1-2: new high-speed USB device number 5 using tegra-xusb [ 4.216690] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ 4.216698] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.216702] usb 1-2: Product: USB2.1 Hub [ 4.216706] usb 1-2: Manufacturer: GenesysLogic [ 4.217643] hub 1-2:1.0: USB hub found [ 4.217978] hub 1-2:1.0: 4 ports detected [ 4.250927] random: systemd: uninitialized urandom read (16 bytes read) [ 4.253796] systemd[1]: Created slice User and Session Slice. [ 4.254114] random: systemd: uninitialized urandom read (16 bytes read) [ 4.254159] systemd[1]: Reached target Swap. [ 4.254213] random: systemd: uninitialized urandom read (16 bytes read) [ 4.254337] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.255551] systemd[1]: Created slice System Slice. [ 4.255826] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.296844] usb 1-3.6: new high-speed USB device number 6 using tegra-xusb [ 4.312676] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.318662] usb 1-3.6: New USB device found, idVendor=0bda, idProduct=b720 [ 4.318669] usb 1-3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.318674] usb 1-3.6: Product: 802.11n WLAN Adapter [ 4.318679] usb 1-3.6: Manufacturer: Realtek [ 4.318683] usb 1-3.6: SerialNumber: 00e04c000001 [ 4.534096] usb 1-2.2: new low-speed USB device number 7 using tegra-xusb [ 4.562403] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 4.562412] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.562417] usb 1-2.2: Product: USB Optical Mouse [ 4.562421] usb 1-2.2: Manufacturer: PixArt [ 4.565996] input: PixArt USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:093A:2510.0001/input/input5 [ 4.566469] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3610000.xhci-2.2/input0 [ 4.636215] systemd-journald[2370]: Received request to flush runtime journal from PID 1 [ 4.673921] usb 1-2.3: new low-speed USB device number 8 using tegra-xusb [ 4.701973] usb 1-2.3: New USB device found, idVendor=413c, idProduct=2113 [ 4.701983] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.701988] usb 1-2.3: Product: Dell KB216 Wired Keyboard [ 4.708128] input: Dell KB216 Wired Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2113.0002/input/input6 [ 4.766596] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3610000.xhci-2.3/input0 [ 4.771904] input: Dell KB216 Wired Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.1/0003:413C:2113.0003/input/input7 [ 4.786482] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.830598] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3610000.xhci-2.3/input1 [ 5.136239] RTW: module init start [ 5.136247] RTW: rtl8723bu v5.8.4_33660.20190516_COEX20181129-7272 [ 5.136250] RTW: build time: Sep 13 2021 14:17:02 [ 5.136254] RTW: rtl8723bu BT-Coex version = COEX20181129-7272 [ 5.136292] RTW: rtw_inetaddr_notifier_register [ 5.136739] RTW: usb_endpoint_descriptor(0): [ 5.136744] RTW: bLength=7 [ 5.136747] RTW: bDescriptorType=5 [ 5.136751] RTW: bEndpointAddress=84 [ 5.136754] RTW: wMaxPacketSize=512 [ 5.136757] RTW: bInterval=0 [ 5.136760] RTW: RT_usb_endpoint_is_bulk_in = 4 [ 5.136763] RTW: usb_endpoint_descriptor(1): [ 5.136766] RTW: bLength=7 [ 5.136769] RTW: bDescriptorType=5 [ 5.136772] RTW: bEndpointAddress=5 [ 5.136775] RTW: wMaxPacketSize=512 [ 5.136778] RTW: bInterval=0 [ 5.136781] RTW: RT_usb_endpoint_is_bulk_out = 5 [ 5.136784] RTW: usb_endpoint_descriptor(2): [ 5.136787] RTW: bLength=7 [ 5.136790] RTW: bDescriptorType=5 [ 5.136793] RTW: bEndpointAddress=6 [ 5.136796] RTW: wMaxPacketSize=512 [ 5.136799] RTW: bInterval=0 [ 5.136802] RTW: RT_usb_endpoint_is_bulk_out = 6 [ 5.136805] RTW: usb_endpoint_descriptor(3): [ 5.136807] RTW: bLength=7 [ 5.136810] RTW: bDescriptorType=5 [ 5.136813] RTW: bEndpointAddress=87 [ 5.136816] RTW: wMaxPacketSize=64 [ 5.136819] RTW: bInterval=3 [ 5.136823] RTW: RT_usb_endpoint_is_int_in = 7, Interval = 3 [ 5.136825] RTW: usb_endpoint_descriptor(4): [ 5.136828] RTW: bLength=7 [ 5.136831] RTW: bDescriptorType=5 [ 5.136834] RTW: bEndpointAddress=8 [ 5.136837] RTW: wMaxPacketSize=512 [ 5.136840] RTW: bInterval=0 [ 5.136843] RTW: RT_usb_endpoint_is_bulk_out = 8 [ 5.136846] RTW: usb_endpoint_descriptor(5): [ 5.136849] RTW: bLength=7 [ 5.136852] RTW: bDescriptorType=5 [ 5.136854] RTW: bEndpointAddress=9 [ 5.136857] RTW: wMaxPacketSize=512 [ 5.136860] RTW: bInterval=0 [ 5.136863] RTW: RT_usb_endpoint_is_bulk_out = 9 [ 5.136866] RTW: nr_endpoint=6, in_num=2, out_num=4 [ 5.136869] RTW: USB_SPEED_HIGH [ 5.136874] RTW: CHIP TYPE: RTL8723BU [ 5.139771] RTW: Chip Version Info: CHIP_8723B_T6_1T1R_RomVer(0) [ 5.139781] RTW: _ConfigChipOutEP_8723 OutEpQueueSel(0x07), OutEpNumber(4) [ 5.139892] RTW: EEPROM type is E-FUSE [ 5.143591] RTW: Boot from EFUSE, Autoload OK ! [ 5.144142] RTW: hal_EfuseSwitchToBank: Efuse switch bank to 0 [ 5.294040] RTW: hal_ReadEFuse_WiFi: data end at address=0x82 [ 5.294278] RTW: HW EFUSE [ 5.294290] RTW: 0x000: 29 81 03 7C 01 08 21 00 40 07 05 35 10 00 00 00 [ 5.294340] RTW: 0x010: 32 33 33 33 32 32 31 32 32 32 31 00 FF FF FF FF [ 5.294388] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.294453] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 32 33 33 33 32 32 [ 5.294503] RTW: 0x040: 31 32 32 32 31 00 FF FF FF FF FF FF FF FF FF FF [ 5.294553] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.294607] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.294654] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.294703] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.294751] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.294798] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.294846] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 0B 1C 00 00 00 FF FF [ 5.294893] RTW: 0x0C0: FF 28 20 11 00 00 00 FF 00 FF FF FF FF FF FF FF [ 5.294941] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295005] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295054] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295102] RTW: 0x100: DA 0B 20 B7 E7 47 03 0C CF 89 58 E5 58 09 03 52 [ 5.295149] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 5.295197] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 5.295244] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295292] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 5.295339] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295387] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295434] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295483] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295530] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295578] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295629] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295676] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295724] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295771] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295820] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.295871] RTW: EEPROM VID = 0x bda [ 5.295874] RTW: EEPROM PID = 0xb720 [ 5.295989] RTW: Hal_EfuseParseBTCoexistInfo_8723B: Enable BT-coex, ant_num=1 [ 5.295998] RTW: hal_com_config_channel_plan chplan:0x20 [ 5.296007] RTW: InitAdapterVariablesByPROM_8723BU(): REPLACEMENT = 0 [ 5.296012] RTW: rtw_hal_read_chip_info in 156 ms [ 5.296028] RTW: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13 [ 5.296036] RTW: [RF_PATH] IC's RF PATH:RF_1T1R, max_tx_cnt:1 [ 5.296040] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 5.296044] RTW: [RF_PATH] Registry's RF PATH:UNKNOWN [ 5.296047] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 5.296050] RTW: [RF_PATH] HALDATA's RF PATH:RF_1T1R [ 5.296053] RTW: [RF_PATH] NumTotalRFPath:1 [ 5.296058] RTW: rtw_hal_rfpath_init trx_path_bmp:0x11(RF_1T1R), NumTotalRFPath:1, max_tx_cnt:1 [ 5.296061] RTW: [TRX_Nss] HALSPEC - tx_nss :1, rx_nss:1 [ 5.296064] RTW: [TRX_Nss] Registry - tx_nss :0, rx_nss:0 [ 5.296067] RTW: [TRX_Nss] HALDATA - tx_nss :1, rx_nss:1 [ 5.296071] RTW: rtw_hal_trxnss_init tx_nss:1, rx_nss:1 [ 5.296171] RTW: init_mlme_default_rate_set: support CCK [ 5.296174] RTW: init_mlme_default_rate_set: support OFDM [ 5.298177] RTW: NR_RECVBUFF: 8 [ 5.298185] RTW: MAX_RECVBUF_SZ: 15360 [ 5.298192] RTW: NR_PREALLOC_RECV_SKB: 8 [ 5.298300] RTW: rtw_alloc_macid((null)) if1, mac_addr:ff:ff:ff:ff:ff:ff macid:1 [ 5.298307] RTW: rtw_init_pwrctrl_priv: IPS_mode=1, LPS_mode=2, LPS_level=0 [ 5.298320] RTW: IQK FW offload:disable [ 5.298327] RTW: Init_ODM_ComInfo_8723b(): Fv=0 Cv=0 [ 5.298360] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 5.298366] RTW: can't get autopm: [ 5.298373] RTW: rtw_macaddr_cfg mac addr:0c:cf:89:58:e5:58 [ 5.298377] RTW: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0 [ 5.298412] RTW: rtw_wiphy_alloc(phy0) [ 5.298417] RTW: rtw_wdev_alloc(padapter=ffffff800a471000) [ 5.298423] RTW: rtw_wiphy_register(phy0) [ 5.298427] RTW: Register RTW cfg80211 vendor cmd(0x67) interface [ 5.298785] RTW: rtw_reg_notifier: NL80211_REGDOM_SET_BY_CORE [ 5.298957] RTW: rtw_ndev_init(wlan0) if1 mac_addr=0c:cf:89:58:e5:58 [ 5.300070] RTW: rtw_ndev_notifier_call(wlan0) state:16 [ 5.300934] RTW: cfg80211_rtw_get_txpower [ 5.300947] RTW: rtw_ndev_notifier_call(wlan0) state:5 [ 5.301053] usbcore: registered new interface driver rtl8723bu [ 5.301058] RTW: module init ret=0 [ 5.338476] RTW: rtw_reg_notifier: NL80211_REGDOM_SET_BY_CORE [ 5.576530] random: crng init done [ 5.576677] random: 7 urandom warning(s) missed due to ratelimiting [ 5.740581] using random self ethernet address [ 5.740737] using random host ethernet address [ 6.082307] cpu-throttle-alert cooling device registered. [ 6.083728] gpu-throttle-alert cooling device registered. [ 6.084481] aux-throttle-alert cooling device registered. [ 6.217519] Mass Storage Function, version: 2009/09/11 [ 6.217529] LUN: removable file: (no medium) [ 6.226410] using random self ethernet address [ 6.226575] using random host ethernet address [ 6.259415] rndis0: HOST MAC 42:2c:77:93:d3:a8 [ 6.259532] rndis0: MAC 42:2c:77:93:d3:a9 [ 6.261198] usb0: HOST MAC 42:2c:77:93:d3:aa [ 6.261297] usb0: MAC 42:2c:77:93:d3:ab [ 6.261331] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.274410] l4tbr0: port 1(rndis0) entered blocking state [ 6.274417] l4tbr0: port 1(rndis0) entered disabled state [ 6.275639] device rndis0 entered promiscuous mode [ 6.287903] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.294158] FAN rising trip_level:1 cur_temp:46100 trip_temps[2]:60000 [ 6.294957] l4tbr0: port 2(usb0) entered blocking state [ 6.294965] l4tbr0: port 2(usb0) entered disabled state [ 6.298342] device usb0 entered promiscuous mode [ 6.316203] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.627525] android_work: did not send uevent (0 0 (null)) [ 6.630531] ras_fhi_disable: FHI 475 disabled [ 6.633957] CPU4: shutdown [ 6.634097] psci: CPU4 killed (polled 0 ms) [ 6.653625] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.690832] ras_fhi_disable: FHI 476 disabled [ 6.695303] CPU5: shutdown [ 6.695452] psci: CPU5 killed (polled 0 ms) [ 6.696881] android_work: sent uevent USB_STATE=CONNECTED [ 6.697075] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 6.731443] android_work: sent uevent USB_STATE=DISCONNECTED [ 6.820830] android_work: sent uevent USB_STATE=CONNECTED [ 6.822527] configfs-gadget gadget: high-speed config #1: c [ 6.822558] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 6.822571] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 6.822582] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 6.822665] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 6.822678] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 6.822689] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 6.822717] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 6.822737] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 6.822754] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 6.822892] android_work: sent uevent USB_STATE=CONFIGURED [ 6.833437] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 6.833454] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 6.833902] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 6.834017] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 6.853000] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 6.853017] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 6.889270] zram: Added device: zram0 [ 6.890575] zram: Added device: zram1 [ 6.894783] zram: Added device: zram2 [ 6.897769] zram: Added device: zram3 [ 6.952623] zram0: detected capacity change from 0 to 1017819136 [ 6.966727] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.972481] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.972553] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 6.972721] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 7.003217] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.005783] eth1: 0xffffff800b3ae000, aa:97:a0:b6:ae:97, IRQ 557 [ 7.049167] Adding 993960k swap on /dev/zram0. Priority:5 extents:1 across:993960k SS [ 7.057225] zram1: detected capacity change from 0 to 1017819136 [ 7.065187] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.070220] RTW: cfg80211_rtw_get_txpower [ 7.083369] Adding 993960k swap on /dev/zram1. Priority:5 extents:1 across:993960k SS [ 7.084576] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.084727] RTW: rtw_ndev_notifier_call(wlan0) state:13 [ 7.084733] RTW: _netdev_open(wlan0) , bup=0 [ 7.085093] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 7.085097] RTW: MAC has not been powered on yet. [ 7.096742] zram2: detected capacity change from 0 to 1017819136 [ 7.134065] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 7.135361] Adding 993960k swap on /dev/zram2. Priority:5 extents:1 across:993960k SS [ 7.135534] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 7.135543] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 7.135551] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 7.135554] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 7.140051] zram3: detected capacity change from 0 to 1017819136 [ 7.161408] Adding 993960k swap on /dev/zram3. Priority:5 extents:1 across:993960k SS [ 7.174374] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070305 [ 7.175397] RTW: _8051Reset8723: Finish [ 7.204556] RTW: _FWFreeToGo: Polling FW ready OK! (414, 28ms), REG_MCUFWDL:0x000702c6 [ 7.204564] RTW: FWDL success. write_fw:1, 52ms [ 7.204627] RTW: <=== rtl8723b_FirmwareDownload() [ 7.204632] RTW: fw download ok! [ 7.914027] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 7.916021] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 7.920252] RTW: txpath=0x1, rxpath=0x1 [ 7.920259] RTW: txpath_1ss:0x1, num:1 [ 8.084617] tegradc 15200000.nvdisplay: unblank [ 8.084630] tegradc 15210000.nvdisplay: blank - powerdown [ 8.140892] RTW: rtl8723bu_hal_init in 1056ms [ 8.140904] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:58 [ 8.141663] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:58 [ 8.141671] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:58 [ 8.141947] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 8.143239] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 8.150626] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:58 [ 8.151196] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 8.151659] RTW: Using the default RF gain. [ 8.151667] RTW: MAC Address = 0c:cf:89:58:e5:58 [ 8.151672] RTW: rtw_start_drv_threads(wlan0) enter [ 8.151675] RTW: rtw_start_drv_threads(wlan0) start RTW_CMD_THREAD [ 8.151951] RTW: rtw_cfg80211_init_wiphy:rf_type=0 [ 8.151959] RTW: [HT] HAL Support STBC = 0x01 [ 8.151968] RTW: -871x_drv - drv_open, bup=1 [ 8.152226] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.152239] RTW: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1 [ 8.152245] RTW: rtw_ndev_notifier_call(wlan0) state:1 [ 8.154229] Bridge firewalling registered [ 8.173545] RTW: cfg80211_rtw_get_txpower [ 8.191342] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 8.314360] RTW: cfg80211_rtw_get_txpower [ 8.314403] RTW: cfg80211_rtw_get_txpower [ 8.314597] RTW: cfg80211_rtw_get_txpower [ 8.314631] RTW: cfg80211_rtw_get_txpower [ 8.315409] RTW: cfg80211_rtw_get_txpower [ 8.315467] RTW: rtw_ndev_notifier_call(wlan0) state:4 [ 8.334435] RTW: cfg80211_rtw_flush_pmksa(wlan0) [ 8.387551] RTW: rtw_ndev_notifier_call(wlan0) state:4 [ 8.387916] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.390517] RTW: cfg80211_rtw_scan(wlan0) [ 8.390698] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 8.395486] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 8.499381] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 8.607308] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 8.711338] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 8.748078] Netfilter messages via NETLINK v0.30. [ 8.754952] ctnetlink v0.93: registering with nfnetlink. [ 8.815477] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 8.930215] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 9.040829] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 9.058367] fuse init (API version 7.26) [ 9.090599] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.147403] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 9.251299] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 9.366477] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 9.475915] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 9.583418] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 9.694846] RTW: ===>phy_SwChnl8723B: Channel = 13 [ 9.799516] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 9.805479] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002 [ 9.805556] RTW: survey done event(13) band:0 for wlan0 [ 9.806840] RTW: rtw_indicate_scan_done(wlan0) [ 9.812210] RTW: ==>rtw_ps_processor .fw_state(8) [ 9.813775] RTW: ==>ips_enter cnts:1 [ 9.813781] RTW: nolinked power save enter [ 9.813785] RTW: ===> rtw_ips_pwr_down................... [ 9.813789] RTW: ====> rtw_ips_dev_unload... [ 9.816411] RTW: usb_read_port_cancel [ 9.816615] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 9.818092] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 9.818314] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 9.818519] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 9.818725] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 9.818930] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 9.819136] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 9.819328] RTW: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False) [ 9.819353] RTW: usb_write_port_cancel [ 9.819382] RTW: ==> rtl8723bu_hal_deinit [ 9.819389] RTW: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1 [ 9.819395] RTW: SetHwReg: bMacPwrCtrlOn=0 [ 9.841137] RTW: <=== rtw_ips_pwr_down..................... in 28ms [ 9.853664] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.855683] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.009000] l4tbr0: port 2(usb0) entered blocking state [ 11.009009] l4tbr0: port 2(usb0) entered forwarding state [ 11.009085] l4tbr0: port 1(rndis0) entered blocking state [ 11.009091] l4tbr0: port 1(rndis0) entered forwarding state [ 11.009181] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 11.009207] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 11.380096] RTW: cfg80211_rtw_scan(wlan0) [ 11.380110] RTW: _rtw_pwr_wakeup call ips_leave.... [ 11.380115] RTW: ==>ips_leave cnts:1 [ 11.380119] RTW: ===> rtw_ips_pwr_up.............. [ 11.380143] RTW: ===> ips_netdrv_open......... [ 11.380732] RTW: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea. [ 11.380737] RTW: MAC has not been powered on yet. [ 11.384627] RTW: SetHwReg: bMacPwrCtrlOn=1 [ 11.385612] RTW: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0 [ 11.385620] RTW: rtl8723b_FirmwareDownload fw: FW_NIC, size: 32400 [ 11.385627] RTW: rtl8723b_FirmwareDownload: fw_ver=29 fw_subver=cc02 sig=0x5301, Month=05, Date=17, Hour=11, Minute=19 [ 11.385630] RTW: rtl8723b_FirmwareDownload(): Shift for fw header! [ 11.410106] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070605 [ 11.411126] RTW: _8051Reset8723: Finish [ 11.440289] RTW: _FWFreeToGo: Polling FW ready OK! (451, 28ms), REG_MCUFWDL:0x000706c6 [ 11.440297] RTW: FWDL success. write_fw:1, 52ms [ 11.440352] RTW: <=== rtl8723b_FirmwareDownload() [ 11.440357] RTW: fw download ok! [ 12.037668] RTW: usb_AggSettingRxUpdate: RX Agg-USB mode, size=12KB, timeout=1024us [ 12.039628] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 12.043023] RTW: txpath=0x1, rxpath=0x1 [ 12.043029] RTW: txpath_1ss:0x1, num:1 [ 12.191672] RTW: rtl8723bu_hal_init in 812ms [ 12.191685] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:58 [ 12.192363] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:58 [ 12.192370] RTW: wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:58 [ 12.192546] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500 [ 12.193681] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 12.196810] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =0c:cf:89:58:e5:58 [ 12.197392] RTW: #### hw_var_set_opmode() -4448 hw_port(0) mode = 2 #### [ 12.197785] RTW: Using the default RF gain. [ 12.197915] RTW: <=== rtw_ips_pwr_up.............. in 820ms [ 12.197920] RTW: nolinked power save leave [ 12.197983] RTW: ==> ips_leave.....LED(0x00e28282)... [ 12.205970] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000 [ 12.210911] RTW: ===>phy_SwChnl8723B: Channel = 1 [ 12.315301] RTW: ===>phy_SwChnl8723B: Channel = 2 [ 12.427273] RTW: ===>phy_SwChnl8723B: Channel = 3 [ 12.531161] RTW: ===>phy_SwChnl8723B: Channel = 4 [ 12.635269] RTW: ===>phy_SwChnl8723B: Channel = 5 [ 12.673317] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 12.673355] tegra_machine_dai_init===========8316================== 353 [ 12.673382] tegra_machine_dai_init===========8316================== 431 [ 12.739282] RTW: ===>phy_SwChnl8723B: Channel = 6 [ 12.840669] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 12.840706] tegra_machine_dai_init===========8316================== 353 [ 12.840732] tegra_machine_dai_init===========8316================== 431 [ 12.843302] RTW: ===>phy_SwChnl8723B: Channel = 7 [ 12.951276] RTW: ===>phy_SwChnl8723B: Channel = 8 [ 12.962330] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 12.962368] tegra_machine_dai_init===========8316================== 353 [ 12.962398] tegra_machine_dai_init===========8316================== 431 [ 13.059302] RTW: ===>phy_SwChnl8723B: Channel = 9 [ 13.089218] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 13.089258] tegra_machine_dai_init===========8316================== 353 [ 13.089303] tegra_machine_dai_init===========8316================== 431 [ 13.090952] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 13.090985] tegra_machine_dai_init===========8316================== 353 [ 13.091012] tegra_machine_dai_init===========8316================== 431 [ 13.094983] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 13.095015] tegra_machine_dai_init===========8316================== 353 [ 13.095042] tegra_machine_dai_init===========8316================== 431 [ 13.163145] RTW: ===>phy_SwChnl8723B: Channel = 10 [ 13.207901] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 13.207939] tegra_machine_dai_init===========8316================== 353 [ 13.207969] tegra_machine_dai_init===========8316================== 431 [ 13.209534] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 13.209565] tegra_machine_dai_init===========8316================== 353 [ 13.209592] tegra_machine_dai_init===========8316================== 431 [ 13.227624] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 13.227662] tegra_machine_dai_init===========8316================== 353 [ 13.227690] tegra_machine_dai_init===========8316================== 431 [ 13.267317] RTW: ===>phy_SwChnl8723B: Channel = 11 [ 13.371344] RTW: ===>phy_SwChnl8723B: Channel = 12 [ 13.407142] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 13.407179] tegra_machine_dai_init===========8316================== 353 [ 13.407208] tegra_machine_dai_init===========8316================== 431