=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.02.13 14:48:53 =~=~=~=~=~=~=~=~=~=~=~= [0000.138] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f97eef92) [0000.147] I> Boot-device: eMMC [0000.154] I> sdmmc bdev is already initialized [0000.159] I> pmic: reset reason (nverc): 0x0 [0000.192] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.212] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.218] W> No valid slot number is found in scratch register [0000.223] W> Return default slot: _a [0000.227] I> A/B: bin_type (16) slot 0 [0000.230] I> Loading partition bpmp-fw at 0xd7800000 [0000.235] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.241] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.265] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.271] W> No valid slot number is found in scratch register [0000.277] W> Return default slot: _a [0000.280] I> A/B: bin_type (17) slot 0 [0000.284] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.289] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.294] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.314] I> Binary(17) of size 138656 is loaded @ 0xd79de000 [0000.343] I> Loading SCE-FW ... [0000.346] W> No valid slot number is found in scratch register [0000.352] W> Return default slot: _a [0000.355] I> A/B: bin_type (12) slot 0 [0000.359] I> Loading partition sce-fw at 0xd7300000 [0000.363] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.369] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.388] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.394] I> Init SCE [0000.396] I> Loading APE-FW ... [0000.399] W> No valid slot number is found in scratch register [0000.405] W> Return default slot: _a [0000.408] I> A/B: bin_type (11) slot 0 [0000.412] I> Loading partition adsp-fw at 0xd7400000 [0000.416] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.422] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.441] I> Binary(11) of size 77232 is loaded @ 0xd7400000 [0000.447] I> Copy BTCM section [0000.450] W> No valid slot number is found in scratch register [0000.455] W> Return default slot: _a [0000.459] I> A/B: bin_type (13) slot 0 [0000.462] I> Loading partition cpu-bootloader at 0x96000000 [0000.468] I> Reading two headers - addr:0x96000000 blocks:1 [0000.473] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.494] I> Binary(13) of size 309424 is loaded @ 0x96000000 [0000.500] W> No valid slot number is found in scratch register [0000.506] W> Return default slot: _a [0000.509] I> A/B: bin_type (20) slot 0 [0000.513] I> Loading partition bootloader-dtb at 0x85205400 [0000.518] I> Reading two headers - addr:0x85205400 blocks:1 [0000.523] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1 [0000.543] I> Binary(20) of size 192272 is loaded @ 0x85205400 [0000.549] W> No valid slot number is found in scratch register [0000.555] W> Return default slot: _a [0000.558] I> A/B: bin_type (14) slot 0 [0000.562] I> Loading partition secure-os at 0x85305600 [0000.567] I> Reading two headers - addr:0x85305600 blocks:1 [0000.572] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1 [0000.594] I> Binary(14) of size 406960 is loaded @ 0x85305600 [0000.602] I> TOS boot-params @ 0x85000000 [0000.606] I> TOS params prepared [0000.609] I> Loading EKS ... [0000.612] I> A/B: bin_type (15) slot 0 [0000.615] I> Loading partition eks at 0x85905800 [0000.620] I> Reading two headers - addr:0x85905800 blocks:1 [0000.625] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1 [0000.644] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.649] I> EKB detected (length: 0x400) @ 0x85905800 [0000.654] I> Copied encrypted keys [0000.658] I> boot profiler @ 0x175844000 [0000.662] I> boot profiler for TOS @ 0x175844000 [0000.667] I> Unhalting SCE [0000.669] I> Primary Memory Start:80000000 Size:70000000 [0000.675] I> Extended Memory Start:f0110000 Size:856f0000 [0000.681] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):9892ce1 NOTICE: BL31: Built : 09:21:30, Nov 22 2022 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 347: key_mgnt_processing ....... hwkey-agent: 255: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0000.905] I> Welcome to Cboot [0000.908] I> Cboot Version: t186-cf8d3df5 [0000.912] I> CPU-BL Params @ 0x175800000 [0000.915] I> 0) Base:0x00000000 Size:0x00000000 [0000.920] I> 1) Base:0x177f00000 Size:0x00100000 [0000.924] I> 2) Base:0x177e00000 Size:0x00100000 [0000.929] I> 3) Base:0x177d00000 Size:0x00100000 [0000.933] I> 4) Base:0x177c00000 Size:0x00100000 [0000.938] I> 5) Base:0x177b00000 Size:0x00100000 [0000.942] I> 6) Base:0x177800000 Size:0x00200000 [0000.947] I> 7) Base:0x177400000 Size:0x00400000 [0000.951] I> 8) Base:0x177a00000 Size:0x00100000 [0000.956] I> 9) Base:0x177300000 Size:0x00100000 [0000.961] I> 10) Base:0x176800000 Size:0x00800000 [0000.965] I> 11) Base:0x30000000 Size:0x00040000 [0000.969] I> 12) Base:0xf0000000 Size:0x00100000 [0000.974] I> 13) Base:0x30040000 Size:0x00001000 [0000.978] I> 14) Base:0x30048000 Size:0x00001000 [0000.983] I> 15) Base:0x30049000 Size:0x00001000 [0000.987] I> 16) Base:0x3004a000 Size:0x00001000 [0000.992] I> 17) Base:0x3004b000 Size:0x00001000 [0000.996] I> 18) Base:0x3004c000 Size:0x00001000 [0001.000] I> 19) Base:0x3004d000 Size:0x00001000 [0001.005] I> 20) Base:0x3004e000 Size:0x00001000 [0001.009] I> 21) Base:0x3004f000 Size:0x00001000 [0001.014] I> 22) Base:0x00000000 Size:0x00000000 [0001.018] I> 23) Base:0xf0100000 Size:0x00010000 [0001.023] I> 24) Base:0x00000000 Size:0x00000000 [0001.027] I> 25) Base:0x00000000 Size:0x00000000 [0001.032] I> 26) Base:0x00000000 Size:0x00000000 [0001.036] I> 27) Base:0x00000000 Size:0x00000000 [0001.040] I> 28) Base:0x84400000 Size:0x00400000 [0001.045] I> 29) Base:0x30000000 Size:0x00010000 [0001.049] I> 30) Base:0x178000000 Size:0x08000000 [0001.054] I> 31) Base:0x00000000 Size:0x00000000 [0001.058] I> 32) Base:0x176000000 Size:0x00600000 [0001.063] I> 33) Base:0x80000000 Size:0x70000000 [0001.067] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.072] I> 35) Base:0x00000000 Size:0x00000000 [0001.076] I> 36) Base:0x00000000 Size:0x00000000 [0001.080] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.085] I> 38) Base:0x84000000 Size:0x00400000 [0001.089] I> 39) Base:0x96000000 Size:0x02000000 [0001.094] I> 40) Base:0x85000000 Size:0x01200000 [0001.098] I> 41) Base:0x175800000 Size:0x00500000 [0001.103] I> 42) Base:0x00000000 Size:0x00000000 [0001.107] I> 43) Base:0x00000000 Size:0x00000000 [0001.112] GIC-SPI Target CPU: 4 [0001.115] Interrupts Init done [0001.118] calling constructors [0001.121] initializing heap [0001.124] initializing threads [0001.127] initializing timers [0001.130] creating bootstrap completion thread [0001.135] top of bootstrap2() [0001.138] CPU: ARM Cortex A57 [0001.142] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.147] initializing platform [0001.150] I> Bl_dtb @0x85205400 [0001.153] I> gpio framework initialized [0001.158] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.167] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.174] I> GPIO framework and drivers are initialized. [0001.180] I> Boot-device: eMMC [0001.187] I> sdmmc bdev is already initialized [0001.217] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.235] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.240] W> opt-in fuse is not set, skip fuse_burning [0001.245] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.251] W> No valid slot number is found in scratch register [0001.257] W> Return default slot: _a [0001.266] I> A/B: bin_type (21) slot 0 [0001.270] I> Loading kernel-dtb from partition [0001.274] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.291] I> Kernel_dtb @0x80000000 [0001.294] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.302] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.312] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.320] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.326] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.334] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.344] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.352] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.360] I> fixed regulator driver initialized [0001.382] I> register 'maxim' power off handle [0001.387] I> virtual i2c enabled [0001.390] I> registered 'maxim,max77620' pmic [0001.394] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.404] E> failed to read label property for node 149880: 13 [0001.411] E> failed to read reg property for node 149976: 13 [0001.418] E> failed to read reg property for node 150028: 13 [0001.425] E> failed to read label property for node 150112: 13 [0001.432] E> failed to read reg property for node 150180: 13 [0001.438] E> failed to read reg property for node 150252: 13 [0001.446] I> Find /i2c@c250000's alias i2c7 [0001.450] I> Reading eeprom i2c=7 address=0x50 [0001.479] I> Device at /i2c@c250000:0x50 [0001.483] I> Reading eeprom i2c=7 address=0x57 [0001.511] I> Device at /i2c@c250000:0x57 [0001.516] I> Find /i2c@3160000's alias i2c0 [0001.520] I> Reading eeprom i2c=0 address=0x50 [0001.525] E> I2C: slave not found in slaves. [0001.529] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.536] E> I2C_DEV: Failed to send register address 0x00000000. [0001.542] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.552] E> eeprom: Failed to read I2C slave device [0001.556] I> Eeprom read failed 0x3526070d [0001.561] I> Find /i2c@3180000's alias i2c2 [0001.565] I> Reading eeprom i2c=2 address=0x54 [0001.569] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.574] C> GPIO driver for chip_id 0x2 could not be found [0001.579] E> cam_eeprom_read: Can't get gpio driver [0001.584] I> Eeprom read failed 0x4d4d000d [0001.588] I> Reading eeprom i2c=2 address=0x57 [0001.592] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.597] C> GPIO driver for chip_id 0x2 could not be found [0001.602] E> cam_eeprom_read: Can't get gpio driver [0001.607] I> Eeprom read failed 0x4d4d000d [0001.611] I> create_pm_ids: id: 3636-0001-300-J, len: 15 [0001.616] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.627] I> create_pm_ids: id: 3509-0000-200-C, len: 15 [0001.632] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.655] I> regulator 'vdd-hdmi-5v0' already enabled [0001.667] I> regulator 'vdd-hdmi-5v0' already enabled [0001.671] E> tegrabl_display_init_regulator: hdmi cable is not connected [0001.678] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.685] E> cannot find any other nvdisp nodes [0001.690] E> no valid display unit config found in dtb [0001.695] W> display init failed [0001.698] initializing target [0001.701] calling apps_init() [0001.705] starting app kernel_boot_app [0001.727] I> found decompressor handler: lz4-legacy [0001.731] I> decompressing BMP blob ... [0001.804] I> Kernel type = Normal [0001.807] I> ########## Fixed storage boot ########## [0001.812] I> Loading kernel-bootctrl from partition [0001.816] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.830] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.837] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0001.844] W> No valid slot number is found in scratch register [0001.850] W> Return default slot: _a [0001.853] I> A/B: bin_type (24) slot 0 [0001.869] I> Boot image size read from image header: 9902d [0001.874] I> Boot image load address: 0x80400000 [0001.879] I> Loading kernel from partition [0001.883] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.825] I> Validate kernel ... [0002.828] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.836] I> Decrypt the buffer ... [0002.840] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.849] I> done [0002.850] I> Checking boot.img header magic ... [0002.855] I> [OK] [0002.856] I> kernel-dtb is already loaded [0002.860] I> Validate kernel-dtb ... [0002.863] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0002.871] I> Decrypt the buffer ... [0002.874] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.883] I> done [0002.885] I> Kernel hdr @0x80400000 [0002.888] I> Kernel dtb @0x80000000 [0002.891] I> decompressor handler not found [0002.895] I> Copying kernel image (626733 bytes) from 0x80400800 to 0x80600000 ... [0002.903] I> Done [0002.905] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0002.911] I> Updated bpmp info to DTB [0002.916] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0002.921] I> Updated initrd info to DTB [0002.925] W> WARN: Fail to override "console=none" in commandline [0002.930] I> Active rootfs suffix: [0002.934] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.941] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.948] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.955] I> disabled_core_mask: 0xffffff0c [0002.959] W> No valid slot number is found in scratch register [0002.965] W> Return default slot: _a [0002.968] I> Active slot suffix: [0002.972] I> add_boot_slot_suffix: slot_suffix = [0002.976] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.018] I> Updated bootarg info to DTB [0003.022] W> MAC addr invalid! [0003.025] E> Failed to get WIFI MAC address [0003.029] W> MAC addr invalid! [0003.032] E> Failed to get Bluetooth MAC address [0003.036] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:67:f7:97 [0003.042] E> Found no plugin manager ids in source DT [0003.047] W> Add plugin manager ids from board info [0003.052] W> "plugin-manager" doesn't exist, creating [0003.057] W> "ids" doesn't exist, creating [0003.061] W> "connection" doesn't exist, creating [0003.065] W> "configs" doesn't exist, creating [0003.069] I> create_pm_ids: id: 3636-0001-300-J, len: 15 [0003.075] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.086] I> create_pm_ids: id: 3509-0000-200-C, len: 15 [0003.091] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.102] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.109] W> "i2c@c250000" doesn't exist, creating [0003.113] W> "module@0x50" doesn't exist, creating [0003.118] I> Adding plugin-manager/ids/3509-0000-200=/i2c@c250000:module@0x57 [0003.125] W> "module@0x57" doesn't exist, creating [0003.131] I> Adding plugin-manager/ids/3636-0001-300-J [0003.137] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.143] I> Adding plugin-manager/configs/3636-power-config 00 [0003.148] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.154] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.160] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.166] I> Adding plugin-manager/configs/3636-display-config 00 [0003.172] I> Adding plugin-manager/cvm [0003.176] W> "chip-id" doesn't exist, creating [0003.180] I> Adding plugin-manager/chip-id/A02P [0003.185] W> "odm-data" doesn't exist, creating [0003.189] I> Adding /chosen/plugin-manager/odm-data [0003.197] I> added [base:0x80000000, size:0x70000000] to /memory [0003.203] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.209] I> added [base:0x175e00000, size:0x200000] to /memory [0003.215] I> added [base:0x176600000, size:0x200000] to /memory [0003.220] I> added [base:0x177000000, size:0x200000] to /memory [0003.226] I> Updated memory info to DTB [0003.230] W> add_disp_param: failed to get display params for du=0 [0003.237] W> "reset" doesn't exist, creating [0003.241] W> "pmc-reset-reason" doesn't exist, creating [0003.247] W> "pmic-reset-reason" doesn't exist, creating [0003.253] I> Adding ecid(000000016411d1492000000005fb81c0) to DT [0003.259] I> disabled_core_mask: 0xffffff0c [0003.267] I> Add serial number:1420422044710 as DT property [0003.274] I> Plugin-manager override starting [0003.279] I> node /plugin-manager/fragement@0 matches [0003.287] I> node /plugin-manager/fragement@3 matches [0003.300] I> Disable plugin-manager status in FDT [0003.305] I> Plugin-manager override finished successfully [0003.310] I> tegrabl_load_kernel_and_dtb: Done [0003.314] W> tegrabl_display_clear: display is not initialized [0003.320] W> Boot logo display failed... [0003.324] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g4335beb (Nov 22 2022 - 09:21:33 -0800) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 858 bytes read in 31 ms (26.4 KiB/s) 1:primary kernel Retrieving file: /boot/initrd 7238963 bytes read in 192 ms (36 MiB/s) Retrieving file: /boot/Image 34586632 bytes read in 830 ms (39.7 MiB/s) append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 0000000080033ea4 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.299-rt191-tegra (zzw@ubuntu) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT RT Thu Feb 9 14:54:40 PST 2023 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 1.263936] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.271485] imx219 9-0010: board setup failed [ 1.299468] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.307085] imx219 10-0010: board setup failed [ 1.791588] cgroup: cgroup2: unknown option "nsdelegate" [ 4.681180] random: crng init done [ 4.684589] random: 7 urandom warning(s) missed due to ratelimiting [ 5.751059] using random self ethernet address [ 5.755644] using random host ethernet address [ 6.269149] using random self ethernet address [ 6.278650] using random host ethernet address [ 9.371960] CPU1: shutdown [ 9.603312] CPU2: shutdown [ 10.294825] device-mapper: table: 253:0: thin-pool: unknown target type [ 10.302603] device-mapper: ioctl: error adding target to table [ 12.905866] device-mapper: table: 253:0: thin-pool: unknown target type [ 12.912480] device-mapper: ioctl: error adding target to table [ 15.249990] device-mapper: table: 253:0: thin-pool: unknown target type [ 15.258469] device-mapper: ioctl: error adding target to table Ubuntu 18.04.6 LTS tx2nx-desktop ttyS0 tx2nx-desktop login: [0000.138] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f97eef92) [0000.147] I> Boot-device: eMMC [0000.154] I> sdmmc bdev is already initialized [0000.159] I> pmic: reset reason (nverc): 0x0 [0000.192] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.212] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.218] W> No valid slot number is found in scratch register [0000.223] W> Return default slot: _a [0000.227] I> A/B: bin_type (16) slot 0 [0000.230] I> Loading partition bpmp-fw at 0xd7800000 [0000.235] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.241] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.265] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.271] W> No valid slot number is found in scratch register [0000.277] W> Return default slot: _a [0000.280] I> A/B: bin_type (17) slot 0 [0000.284] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.289] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.294] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.313] I> Binary(17) of size 138656 is loaded @ 0xd79de000 [0000.343] I> Loading SCE-FW ... [0000.346] W> No valid slot number is found in scratch register [0000.351] W> Return default slot: _a [0000.355] I> A/B: bin_type (12) slot 0 [0000.358] I> Loading partition sce-fw at 0xd7300000 [0000.363] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.369] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.388] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.393] I> Init SCE [0000.396] I> Loading APE-FW ... [0000.399] W> No valid slot number is found in scratch register [0000.405] W> Return default slot: _a [0000.408] I> A/B: bin_type (11) slot 0 [0000.412] I> Loading partition adsp-fw at 0xd7400000 [0000.416] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.422] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.441] I> Binary(11) of size 77232 is loaded @ 0xd7400000 [0000.447] I> Copy BTCM section [0000.450] W> No valid slot number is found in scratch register [0000.455] W> Return default slot: _a [0000.459] I> A/B: bin_type (13) slot 0 [0000.462] I> Loading partition cpu-bootloader at 0x96000000 [0000.468] I> Reading two headers - addr:0x96000000 blocks:1 [0000.473] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.494] I> Binary(13) of size 309424 is loaded @ 0x96000000 [0000.500] W> No valid slot number is found in scratch register [0000.506] W> Return default slot: _a [0000.509] I> A/B: bin_type (20) slot 0 [0000.513] I> Loading partition bootloader-dtb at 0x85205400 [0000.518] I> Reading two headers - addr:0x85205400 blocks:1 [0000.524] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1 [0000.543] I> Binary(20) of size 192272 is loaded @ 0x85205400 [0000.549] W> No valid slot number is found in scratch register [0000.555] W> Return default slot: _a [0000.558] I> A/B: bin_type (14) slot 0 [0000.562] I> Loading partition secure-os at 0x85305600 [0000.567] I> Reading two headers - addr:0x85305600 blocks:1 [0000.572] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1 [0000.594] I> Binary(14) of size 406960 is loaded @ 0x85305600 [0000.602] I> TOS boot-params @ 0x85000000 [0000.606] I> TOS params prepared [0000.609] I> Loading EKS ... [0000.611] I> A/B: bin_type (15) slot 0 [0000.615] I> Loading partition eks at 0x85905800 [0000.620] I> Reading two headers - addr:0x85905800 blocks:1 [0000.625] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1 [0000.644] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.649] I> EKB detected (length: 0x400) @ 0x85905800 [0000.654] I> Copied encrypted keys [0000.658] I> boot profiler @ 0x175844000 [0000.662] I> boot profiler for TOS @ 0x175844000 [0000.667] I> Unhalting SCE [0000.669] I> Primary Memory Start:80000000 Size:70000000 [0000.675] I> Extended Memory Start:f0110000 Size:856f0000 [0000.681] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):9892ce1 NOTICE: BL31: Built : 09:21:30, Nov 22 2022 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 347: key_mgnt_processing ....... hwkey-agent: 255: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0000.905] I> Welcome to Cboot [0000.908] I> Cboot Version: t186-cf8d3df5 [0000.911] I> CPU-BL Params @ 0x175800000 [0000.915] I> 0) Base:0x00000000 Size:0x00000000 [0000.920] I> 1) Base:0x177f00000 Size:0x00100000 [0000.924] I> 2) Base:0x177e00000 Size:0x00100000 [0000.929] I> 3) Base:0x177d00000 Size:0x00100000 [0000.933] I> 4) Base:0x177c00000 Size:0x00100000 [0000.938] I> 5) Base:0x177b00000 Size:0x00100000 [0000.942] I> 6) Base:0x177800000 Size:0x00200000 [0000.947] I> 7) Base:0x177400000 Size:0x00400000 [0000.951] I> 8) Base:0x177a00000 Size:0x00100000 [0000.956] I> 9) Base:0x177300000 Size:0x00100000 [0000.960] I> 10) Base:0x176800000 Size:0x00800000 [0000.965] I> 11) Base:0x30000000 Size:0x00040000 [0000.969] I> 12) Base:0xf0000000 Size:0x00100000 [0000.974] I> 13) Base:0x30040000 Size:0x00001000 [0000.978] I> 14) Base:0x30048000 Size:0x00001000 [0000.982] I> 15) Base:0x30049000 Size:0x00001000 [0000.987] I> 16) Base:0x3004a000 Size:0x00001000 [0000.991] I> 17) Base:0x3004b000 Size:0x00001000 [0000.996] I> 18) Base:0x3004c000 Size:0x00001000 [0001.000] I> 19) Base:0x3004d000 Size:0x00001000 [0001.005] I> 20) Base:0x3004e000 Size:0x00001000 [0001.009] I> 21) Base:0x3004f000 Size:0x00001000 [0001.013] I> 22) Base:0x00000000 Size:0x00000000 [0001.018] I> 23) Base:0xf0100000 Size:0x00010000 [0001.022] I> 24) Base:0x00000000 Size:0x00000000 [0001.027] I> 25) Base:0x00000000 Size:0x00000000 [0001.031] I> 26) Base:0x00000000 Size:0x00000000 [0001.036] I> 27) Base:0x00000000 Size:0x00000000 [0001.040] I> 28) Base:0x84400000 Size:0x00400000 [0001.044] I> 29) Base:0x30000000 Size:0x00010000 [0001.049] I> 30) Base:0x178000000 Size:0x08000000 [0001.053] I> 31) Base:0x00000000 Size:0x00000000 [0001.058] I> 32) Base:0x176000000 Size:0x00600000 [0001.062] I> 33) Base:0x80000000 Size:0x70000000 [0001.067] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.071] I> 35) Base:0x00000000 Size:0x00000000 [0001.076] I> 36) Base:0x00000000 Size:0x00000000 [0001.080] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.085] I> 38) Base:0x84000000 Size:0x00400000 [0001.089] I> 39) Base:0x96000000 Size:0x02000000 [0001.093] I> 40) Base:0x85000000 Size:0x01200000 [0001.098] I> 41) Base:0x175800000 Size:0x00500000 [0001.102] I> 42) Base:0x00000000 Size:0x00000000 [0001.107] I> 43) Base:0x00000000 Size:0x00000000 [0001.111] GIC-SPI Target CPU: 4 [0001.115] Interrupts Init done [0001.118] calling constructors [0001.121] initializing heap [0001.124] initializing threads [0001.127] initializing timers [0001.130] creating bootstrap completion thread [0001.135] top of bootstrap2() [0001.138] CPU: ARM Cortex A57 [0001.141] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.146] initializing platform [0001.150] I> Bl_dtb @0x85205400 [0001.153] I> gpio framework initialized [0001.158] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.166] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.174] I> GPIO framework and drivers are initialized. [0001.179] I> Boot-device: eMMC [0001.186] I> sdmmc bdev is already initialized [0001.217] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.235] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.240] W> opt-in fuse is not set, skip fuse_burning [0001.245] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.251] W> No valid slot number is found in scratch register [0001.257] W> Return default slot: _a [0001.266] I> A/B: bin_type (21) slot 0 [0001.270] I> Loading kernel-dtb from partition [0001.274] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.291] I> Kernel_dtb @0x80000000 [0001.295] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.303] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.313] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.321] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.327] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.334] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.344] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.352] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.360] I> fixed regulator driver initialized [0001.382] I> register 'maxim' power off handle [0001.387] I> virtual i2c enabled [0001.390] I> registered 'maxim,max77620' pmic [0001.394] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.405] E> failed to read label property for node 149880: 13 [0001.411] E> failed to read reg property for node 149976: 13 [0001.418] E> failed to read reg property for node 150028: 13 [0001.425] E> failed to read label property for node 150112: 13 [0001.432] E> failed to read reg property for node 150180: 13 [0001.439] E> failed to read reg property for node 150252: 13 [0001.446] I> Find /i2c@c250000's alias i2c7 [0001.450] I> Reading eeprom i2c=7 address=0x50 [0001.479] I> Device at /i2c@c250000:0x50 [0001.483] I> Reading eeprom i2c=7 address=0x57 [0001.512] I> Device at /i2c@c250000:0x57 [0001.516] I> Find /i2c@3160000's alias i2c0 [0001.520] I> Reading eeprom i2c=0 address=0x50 [0001.525] E> I2C: slave not found in slaves. [0001.529] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.537] E> I2C_DEV: Failed to send register address 0x00000000. [0001.543] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.552] E> eeprom: Failed to read I2C slave device [0001.557] I> Eeprom read failed 0x3526070d [0001.561] I> Find /i2c@3180000's alias i2c2 [0001.565] I> Reading eeprom i2c=2 address=0x54 [0001.570] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.574] C> GPIO driver for chip_id 0x2 could not be found [0001.580] E> cam_eeprom_read: Can't get gpio driver [0001.584] I> Eeprom read failed 0x4d4d000d [0001.588] I> Reading eeprom i2c=2 address=0x57 [0001.593] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.597] C> GPIO driver for chip_id 0x2 could not be found [0001.603] E> cam_eeprom_read: Can't get gpio driver [0001.607] I> Eeprom read failed 0x4d4d000d [0001.611] I> create_pm_ids: id: 3636-0001-300-J, len: 15 [0001.617] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.627] I> create_pm_ids: id: 3509-0000-200-C, len: 15 [0001.633] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.656] I> regulator 'vdd-hdmi-5v0' already enabled [0001.667] I> regulator 'vdd-hdmi-5v0' already enabled [0001.672] E> tegrabl_display_init_regulator: hdmi cable is not connected [0001.678] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.686] E> cannot find any other nvdisp nodes [0001.690] E> no valid display unit config found in dtb [0001.696] W> display init failed [0001.699] initializing target [0001.702] calling apps_init() [0001.705] starting app kernel_boot_app [0001.727] I> found decompressor handler: lz4-legacy [0001.732] I> decompressing BMP blob ... [0001.804] I> Kernel type = Normal [0001.807] I> ########## Fixed storage boot ########## [0001.812] I> Loading kernel-bootctrl from partition [0001.817] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.831] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.838] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0001.845] W> No valid slot number is found in scratch register [0001.851] W> Return default slot: _a [0001.854] I> A/B: bin_type (24) slot 0 [0001.870] I> Boot image size read from image header: 9902d [0001.875] I> Boot image load address: 0x80400000 [0001.880] I> Loading kernel from partition [0001.883] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.827] I> Validate kernel ... [0002.830] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.838] I> Decrypt the buffer ... [0002.841] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.850] I> done [0002.852] I> Checking boot.img header magic ... [0002.856] I> [OK] [0002.858] I> kernel-dtb is already loaded [0002.862] I> Validate kernel-dtb ... [0002.865] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0002.872] I> Decrypt the buffer ... [0002.875] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.884] I> done [0002.886] I> Kernel hdr @0x80400000 [0002.889] I> Kernel dtb @0x80000000 [0002.893] I> decompressor handler not found [0002.897] I> Copying kernel image (626733 bytes) from 0x80400800 to 0x80600000 ... [0002.904] I> Done [0002.906] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0002.913] I> Updated bpmp info to DTB [0002.918] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0002.922] I> Updated initrd info to DTB [0002.926] W> WARN: Fail to override "console=none" in commandline [0002.932] I> Active rootfs suffix: [0002.935] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.942] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.950] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.957] I> disabled_core_mask: 0xffffff0c [0002.961] W> No valid slot number is found in scratch register [0002.966] W> Return default slot: _a [0002.970] I> Active slot suffix: [0002.973] I> add_boot_slot_suffix: slot_suffix = [0002.977] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.019] I> Updated bootarg info to DTB [0003.023] W> MAC addr invalid! [0003.026] E> Failed to get WIFI MAC address [0003.030] W> MAC addr invalid! [0003.033] E> Failed to get Bluetooth MAC address [0003.037] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:67:f7:97 [0003.044] E> Found no plugin manager ids in source DT [0003.048] W> Add plugin manager ids from board info [0003.053] W> "plugin-manager" doesn't exist, creating [0003.058] W> "ids" doesn't exist, creating [0003.062] W> "connection" doesn't exist, creating [0003.067] W> "configs" doesn't exist, creating [0003.071] I> create_pm_ids: id: 3636-0001-300-J, len: 15 [0003.076] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.087] I> create_pm_ids: id: 3509-0000-200-C, len: 15 [0003.092] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.103] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.110] W> "i2c@c250000" doesn't exist, creating [0003.115] W> "module@0x50" doesn't exist, creating [0003.120] I> Adding plugin-manager/ids/3509-0000-200=/i2c@c250000:module@0x57 [0003.127] W> "module@0x57" doesn't exist, creating [0003.132] I> Adding plugin-manager/ids/3636-0001-300-J [0003.138] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.144] I> Adding plugin-manager/configs/3636-power-config 00 [0003.150] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.156] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.162] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.167] I> Adding plugin-manager/configs/3636-display-config 00 [0003.174] I> Adding plugin-manager/cvm [0003.177] W> "chip-id" doesn't exist, creating [0003.182] I> Adding plugin-manager/chip-id/A02P [0003.186] W> "odm-data" doesn't exist, creating [0003.191] I> Adding /chosen/plugin-manager/odm-data [0003.199] I> added [base:0x80000000, size:0x70000000] to /memory [0003.204] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.210] I> added [base:0x175e00000, size:0x200000] to /memory [0003.216] I> added [base:0x176600000, size:0x200000] to /memory [0003.222] I> added [base:0x177000000, size:0x200000] to /memory [0003.227] I> Updated memory info to DTB [0003.232] W> add_disp_param: failed to get display params for du=0 [0003.239] W> "reset" doesn't exist, creating [0003.243] W> "pmc-reset-reason" doesn't exist, creating [0003.248] W> "pmic-reset-reason" doesn't exist, creating [0003.254] I> Adding ecid(000000016411d1492000000005fb81c0) to DT [0003.260] I> disabled_core_mask: 0xffffff0c [0003.269] I> Add serial number:1420422044710 as DT property [0003.276] I> Plugin-manager override starting [0003.281] I> node /plugin-manager/fragement@0 matches [0003.288] I> node /plugin-manager/fragement@3 matches [0003.302] I> Disable plugin-manager status in FDT [0003.306] I> Plugin-manager override finished successfully [0003.311] I> tegrabl_load_kernel_and_dtb: Done [0003.316] W> tegrabl_display_clear: display is not initialized [0003.321] W> Boot logo display failed... [0003.325] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g4335beb (Nov 22 2022 - 09:21:33 -0800) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 858 bytes read in 31 ms (26.4 KiB/s) 1:primary kernel Retrieving file: /boot/initrd 7238963 bytes read in 193 ms (35.8 MiB/s) Retrieving file: /boot/Image 34586632 bytes read in 830 ms (39.7 MiB/s) append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 0000000080033ea4 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.299-rt191-tegra (zzw@ubuntu) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT RT Thu Feb 9 14:54:40 PST 2023 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 1.259919] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.267466] imx219 9-0010: board setup failed [ 1.295432] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.303045] imx219 10-0010: board setup failed [ 1.828563] cgroup: cgroup2: unknown option "nsdelegate" [ 4.257234] random: crng init done [ 4.260644] random: 7 urandom warning(s) missed due to ratelimiting [ 5.961071] using random self ethernet address [ 5.965525] using random host ethernet address [ 6.521576] using random self ethernet address [ 6.527654] using random host ethernet address [ 8.820767] CPU1: shutdown [ 9.089317] CPU2: shutdown [ 11.219628] device-mapper: table: 253:0: thin-pool: unknown target type [ 11.226244] device-mapper: ioctl: error adding target to table [ 13.631370] device-mapper: table: 253:0: thin-pool: unknown target type [ 13.637988] device-mapper: ioctl: error adding target to table [ 15.941768] device-mapper: table: 253:0: thin-pool: unknown target type [ 15.948382] device-mapper: ioctl: error adding target to table Ubuntu 18.04.6 LTS tx2nx-desktop ttyS0 tx2nx-desktop login: [0000.136] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f97eef92) [0000.145] I> Boot-device: eMMC [0000.152] I> sdmmc bdev is already initialized [0000.157] I> pmic: reset reason (nverc): 0x0 [0000.190] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.210] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.216] W> No valid slot number is found in scratch register [0000.221] W> Return default slot: _a [0000.225] I> A/B: bin_type (16) slot 0 [0000.228] I> Loading partition bpmp-fw at 0xd7800000 [0000.233] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.239] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.263] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.269] W> No valid slot number is found in scratch register [0000.275] W> Return default slot: _a [0000.278] I> A/B: bin_type (17) slot 0 [0000.282] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.287] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.292] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.312] I> Binary(17) of size 138656 is loaded @ 0xd79de000 [0000.341] I> Loading SCE-FW ... [0000.344] W> No valid slot number is found in scratch register [0000.350] W> Return default slot: _a [0000.353] I> A/B: bin_type (12) slot 0 [0000.357] I> Loading partition sce-fw at 0xd7300000 [0000.361] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.367] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.386] I> Binary(12) of size 125632 is loaded @ 0xd7300000 [0000.392] I> Init SCE [0000.394] I> Loading APE-FW ... [0000.397] W> No valid slot number is found in scratch register [0000.403] W> Return default slot: _a [0000.406] I> A/B: bin_type (11) slot 0 [0000.410] I> Loading partition adsp-fw at 0xd7400000 [0000.414] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.420] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.439] I> Binary(11) of size 77232 is loaded @ 0xd7400000 [0000.445] I> Copy BTCM section [0000.448] W> No valid slot number is found in scratch register [0000.453] W> Return default slot: _a [0000.457] I> A/B: bin_type (13) slot 0 [0000.460] I> Loading partition cpu-bootloader at 0x96000000 [0000.466] I> Reading two headers - addr:0x96000000 blocks:1 [0000.471] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.492] I> Binary(13) of size 309424 is loaded @ 0x96000000 [0000.498] W> No valid slot number is found in scratch register [0000.504] W> Return default slot: _a [0000.507] I> A/B: bin_type (20) slot 0 [0000.511] I> Loading partition bootloader-dtb at 0x85205400 [0000.516] I> Reading two headers - addr:0x85205400 blocks:1 [0000.522] I> Addr: 0x85205400, start-block: 29382664, num_blocks: 1 [0000.541] I> Binary(20) of size 192272 is loaded @ 0x85205400 [0000.547] W> No valid slot number is found in scratch register [0000.553] W> Return default slot: _a [0000.556] I> A/B: bin_type (14) slot 0 [0000.560] I> Loading partition secure-os at 0x85305600 [0000.565] I> Reading two headers - addr:0x85305600 blocks:1 [0000.570] I> Addr: 0x85305600, start-block: 29384712, num_blocks: 1 [0000.593] I> Binary(14) of size 406960 is loaded @ 0x85305600 [0000.600] I> TOS boot-params @ 0x85000000 [0000.604] I> TOS params prepared [0000.607] I> Loading EKS ... [0000.610] I> A/B: bin_type (15) slot 0 [0000.614] I> Loading partition eks at 0x85905800 [0000.618] I> Reading two headers - addr:0x85905800 blocks:1 [0000.624] I> Addr: 0x85905800, start-block: 29397000, num_blocks: 1 [0000.642] I> Binary(15) of size 1040 is loaded @ 0x85905800 [0000.648] I> EKB detected (length: 0x400) @ 0x85905800 [0000.653] I> Copied encrypted keys [0000.657] I> boot profiler @ 0x175844000 [0000.660] I> boot profiler for TOS @ 0x175844000 [0000.665] I> Unhalting SCE [0000.668] I> Primary Memory Start:80000000 Size:70000000 [0000.673] I> Extended Memory Start:f0110000 Size:856f0000 [0000.680] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):9892ce1 NOTICE: BL31: Built : 09:21:30, Nov 22 2022 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 347: key_mgnt_processing ....... hwkey-agent: 255: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0000.903] I> Welcome to Cboot [0000.906] I> Cboot Version: t186-cf8d3df5 [0000.910] I> CPU-BL Params @ 0x175800000 [0000.914] I> 0) Base:0x00000000 Size:0x00000000 [0000.918] I> 1) Base:0x177f00000 Size:0x00100000 [0000.923] I> 2) Base:0x177e00000 Size:0x00100000 [0000.927] I> 3) Base:0x177d00000 Size:0x00100000 [0000.932] I> 4) Base:0x177c00000 Size:0x00100000 [0000.936] I> 5) Base:0x177b00000 Size:0x00100000 [0000.941] I> 6) Base:0x177800000 Size:0x00200000 [0000.945] I> 7) Base:0x177400000 Size:0x00400000 [0000.950] I> 8) Base:0x177a00000 Size:0x00100000 [0000.954] I> 9) Base:0x177300000 Size:0x00100000 [0000.959] I> 10) Base:0x176800000 Size:0x00800000 [0000.963] I> 11) Base:0x30000000 Size:0x00040000 [0000.968] I> 12) Base:0xf0000000 Size:0x00100000 [0000.972] I> 13) Base:0x30040000 Size:0x00001000 [0000.977] I> 14) Base:0x30048000 Size:0x00001000 [0000.981] I> 15) Base:0x30049000 Size:0x00001000 [0000.986] I> 16) Base:0x3004a000 Size:0x00001000 [0000.990] I> 17) Base:0x3004b000 Size:0x00001000 [0000.994] I> 18) Base:0x3004c000 Size:0x00001000 [0000.999] I> 19) Base:0x3004d000 Size:0x00001000 [0001.003] I> 20) Base:0x3004e000 Size:0x00001000 [0001.008] I> 21) Base:0x3004f000 Size:0x00001000 [0001.012] I> 22) Base:0x00000000 Size:0x00000000 [0001.017] I> 23) Base:0xf0100000 Size:0x00010000 [0001.021] I> 24) Base:0x00000000 Size:0x00000000 [0001.025] I> 25) Base:0x00000000 Size:0x00000000 [0001.030] I> 26) Base:0x00000000 Size:0x00000000 [0001.034] I> 27) Base:0x00000000 Size:0x00000000 [0001.039] I> 28) Base:0x84400000 Size:0x00400000 [0001.043] I> 29) Base:0x30000000 Size:0x00010000 [0001.048] I> 30) Base:0x178000000 Size:0x08000000 [0001.052] I> 31) Base:0x00000000 Size:0x00000000 [0001.057] I> 32) Base:0x176000000 Size:0x00600000 [0001.061] I> 33) Base:0x80000000 Size:0x70000000 [0001.065] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.070] I> 35) Base:0x00000000 Size:0x00000000 [0001.074] I> 36) Base:0x00000000 Size:0x00000000 [0001.079] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.083] I> 38) Base:0x84000000 Size:0x00400000 [0001.088] I> 39) Base:0x96000000 Size:0x02000000 [0001.092] I> 40) Base:0x85000000 Size:0x01200000 [0001.097] I> 41) Base:0x175800000 Size:0x00500000 [0001.101] I> 42) Base:0x00000000 Size:0x00000000 [0001.106] I> 43) Base:0x00000000 Size:0x00000000 [0001.110] GIC-SPI Target CPU: 4 [0001.113] Interrupts Init done [0001.117] calling constructors [0001.120] initializing heap [0001.122] initializing threads [0001.126] initializing timers [0001.129] creating bootstrap completion thread [0001.134] top of bootstrap2() [0001.137] CPU: ARM Cortex A57 [0001.140] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.145] initializing platform [0001.148] I> Bl_dtb @0x85205400 [0001.151] I> gpio framework initialized [0001.156] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.165] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.173] I> GPIO framework and drivers are initialized. [0001.178] I> Boot-device: eMMC [0001.185] I> sdmmc bdev is already initialized [0001.216] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.233] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.239] W> opt-in fuse is not set, skip fuse_burning [0001.244] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.250] W> No valid slot number is found in scratch register [0001.255] W> Return default slot: _a [0001.265] I> A/B: bin_type (21) slot 0 [0001.268] I> Loading kernel-dtb from partition [0001.273] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.290] I> Kernel_dtb @0x80000000 [0001.293] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.301] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.311] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.319] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.325] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.333] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.343] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.351] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.359] I> fixed regulator driver initialized [0001.381] I> register 'maxim' power off handle [0001.386] I> virtual i2c enabled [0001.389] I> registered 'maxim,max77620' pmic [0001.393] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.403] E> failed to read label property for node 149880: 13 [0001.410] E> failed to read reg property for node 149976: 13 [0001.417] E> failed to read reg property for node 150028: 13 [0001.423] E> failed to read label property for node 150112: 13 [0001.430] E> failed to read reg property for node 150180: 13 [0001.437] E> failed to read reg property for node 150252: 13 [0001.444] I> Find /i2c@c250000's alias i2c7 [0001.448] I> Reading eeprom i2c=7 address=0x50 [0001.478] I> Device at /i2c@c250000:0x50 [0001.481] I> Reading eeprom i2c=7 address=0x57 [0001.510] I> Device at /i2c@c250000:0x57 [0001.514] I> Find /i2c@3160000's alias i2c0 [0001.518] I> Reading eeprom i2c=0 address=0x50 [0001.523] E> I2C: slave not found in slaves. [0001.527] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.535] E> I2C_DEV: Failed to send register address 0x00000000. [0001.541] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.551] E> eeprom: Failed to read I2C slave device [0001.555] I> Eeprom read failed 0x3526070d [0001.560] I> Find /i2c@3180000's alias i2c2 [0001.564] I> Reading eeprom i2c=2 address=0x54 [0001.568] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.573] C> GPIO driver for chip_id 0x2 could not be found [0001.578] E> cam_eeprom_read: Can't get gpio driver [0001.583] I> Eeprom read failed 0x4d4d000d [0001.587] I> Reading eeprom i2c=2 address=0x57 [0001.591] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.596] C> GPIO driver for chip_id 0x2 could not be found [0001.601] E> cam_eeprom_read: Can't get gpio driver [0001.606] I> Eeprom read failed 0x4d4d000d [0001.610] I> create_pm_ids: id: 3636-0001-300-J, len: 15 [0001.615] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.626] I> create_pm_ids: id: 3509-0000-200-C, len: 15 [0001.631] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.654] I> regulator 'vdd-hdmi-5v0' already enabled [0001.665] I> regulator 'vdd-hdmi-5v0' already enabled [0001.670] E> tegrabl_display_init_regulator: hdmi cable is not connected [0001.677] E> tegrabl_display_get_pdata, failed to parse dtb settings [0001.684] E> cannot find any other nvdisp nodes [0001.689] E> no valid display unit config found in dtb [0001.694] W> display init failed [0001.697] initializing target [0001.700] calling apps_init() [0001.704] starting app kernel_boot_app [0001.726] I> found decompressor handler: lz4-legacy [0001.731] I> decompressing BMP blob ... [0001.803] I> Kernel type = Normal [0001.806] I> ########## Fixed storage boot ########## [0001.811] I> Loading kernel-bootctrl from partition [0001.816] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0001.830] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0001.837] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0001.844] W> No valid slot number is found in scratch register [0001.849] W> Return default slot: _a [0001.853] I> A/B: bin_type (24) slot 0 [0001.868] I> Boot image size read from image header: 9902d [0001.874] I> Boot image load address: 0x80400000 [0001.878] I> Loading kernel from partition [0001.882] I> Loading partition kernel at 0x80400000 from device(0x1) [0002.825] I> Validate kernel ... [0002.828] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0002.836] I> Decrypt the buffer ... [0002.839] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.848] I> done [0002.850] I> Checking boot.img header magic ... [0002.854] I> [OK] [0002.856] I> kernel-dtb is already loaded [0002.860] I> Validate kernel-dtb ... [0002.863] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0002.870] I> Decrypt the buffer ... [0002.873] W> tegrabl_decrypt_block: fuse (0x0) is not burnt to do encryption (0x4); skip decryption. [0002.882] I> done [0002.884] I> Kernel hdr @0x80400000 [0002.887] I> Kernel dtb @0x80000000 [0002.891] I> decompressor handler not found [0002.895] I> Copying kernel image (626733 bytes) from 0x80400800 to 0x80600000 ... [0002.902] I> Done [0002.904] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000 [0002.911] I> Updated bpmp info to DTB [0002.916] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0002.920] I> Updated initrd info to DTB [0002.924] W> WARN: Fail to override "console=none" in commandline [0002.930] I> Active rootfs suffix: [0002.933] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.940] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.948] W> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.955] I> disabled_core_mask: 0xffffff0c [0002.959] W> No valid slot number is found in scratch register [0002.964] W> Return default slot: _a [0002.968] I> Active slot suffix: [0002.971] I> add_boot_slot_suffix: slot_suffix = [0002.975] I> Linux Cmdline: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.017] I> Updated bootarg info to DTB [0003.021] W> MAC addr invalid! [0003.024] E> Failed to get WIFI MAC address [0003.028] W> MAC addr invalid! [0003.031] E> Failed to get Bluetooth MAC address [0003.035] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:67:f7:97 [0003.042] E> Found no plugin manager ids in source DT [0003.046] W> Add plugin manager ids from board info [0003.051] W> "plugin-manager" doesn't exist, creating [0003.056] W> "ids" doesn't exist, creating [0003.060] W> "connection" doesn't exist, creating [0003.065] W> "configs" doesn't exist, creating [0003.069] I> create_pm_ids: id: 3636-0001-300-J, len: 15 [0003.074] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.085] I> create_pm_ids: id: 3509-0000-200-C, len: 15 [0003.090] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.101] I> Adding plugin-manager/ids/3636-0001-300=/i2c@c250000:module@0x50 [0003.108] W> "i2c@c250000" doesn't exist, creating [0003.113] W> "module@0x50" doesn't exist, creating [0003.118] I> Adding plugin-manager/ids/3509-0000-200=/i2c@c250000:module@0x57 [0003.125] W> "module@0x57" doesn't exist, creating [0003.131] I> Adding plugin-manager/ids/3636-0001-300-J [0003.136] I> Adding plugin-manager/configs/3636-mem-type 00 [0003.142] I> Adding plugin-manager/configs/3636-power-config 00 [0003.148] I> Adding plugin-manager/configs/3636-misc-config 00 [0003.154] I> Adding plugin-manager/configs/3636-modem-config 00 [0003.160] I> Adding plugin-manager/configs/3636-touch-config 00 [0003.166] I> Adding plugin-manager/configs/3636-display-config 00 [0003.172] I> Adding plugin-manager/cvm [0003.175] W> "chip-id" doesn't exist, creating [0003.180] I> Adding plugin-manager/chip-id/A02P [0003.184] W> "odm-data" doesn't exist, creating [0003.189] I> Adding /chosen/plugin-manager/odm-data [0003.197] I> added [base:0x80000000, size:0x70000000] to /memory [0003.202] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.208] I> added [base:0x175e00000, size:0x200000] to /memory [0003.214] I> added [base:0x176600000, size:0x200000] to /memory [0003.220] I> added [base:0x177000000, size:0x200000] to /memory [0003.226] I> Updated memory info to DTB [0003.230] W> add_disp_param: failed to get display params for du=0 [0003.237] W> "reset" doesn't exist, creating [0003.241] W> "pmc-reset-reason" doesn't exist, creating [0003.246] W> "pmic-reset-reason" doesn't exist, creating [0003.252] I> Adding ecid(000000016411d1492000000005fb81c0) to DT [0003.258] I> disabled_core_mask: 0xffffff0c [0003.267] I> Add serial number:1420422044710 as DT property [0003.274] I> Plugin-manager override starting [0003.279] I> node /plugin-manager/fragement@0 matches [0003.286] I> node /plugin-manager/fragement@3 matches [0003.300] I> Disable plugin-manager status in FDT [0003.304] I> Plugin-manager override finished successfully [0003.309] I> tegrabl_load_kernel_and_dtb: Done [0003.314] W> tegrabl_display_clear: display is not initialized [0003.319] W> Boot logo display failed... [0003.323] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g4335beb (Nov 22 2022 - 09:21:33 -0800) SoC: tegra186 Model: NVIDIA P3636-0001 Board: NVIDIA P3636-0001 DRAM: 3.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 858 bytes read in 30 ms (27.3 KiB/s) 1:primary kernel Retrieving file: /boot/initrd 7238963 bytes read in 193 ms (35.8 MiB/s) Retrieving file: /boot/Image 34586632 bytes read in 830 ms (39.7 MiB/s) append: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 0000000080033ea4 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.299-rt191-tegra (zzw@ubuntu) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT RT Thu Feb 9 14:54:40 PST 2023 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 1.281709] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.289252] imx219 9-0010: board setup failed [ 1.317244] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.324866] imx219 10-0010: board setup failed [ 1.882498] cgroup: cgroup2: unknown option "nsdelegate" [ 4.155603] random: crng init done [ 4.159014] random: 7 urandom warning(s) missed due to ratelimiting [ 5.899264] using random self ethernet address [ 5.906752] using random host ethernet address [ 6.922360] using random self ethernet address [ 6.928088] using random host ethernet address [ 7.585007] CPU1: shutdown [ 7.858680] CPU2: shutdown [ 9.944930] device-mapper: table: 253:0: thin-pool: unknown target type [ 9.951548] device-mapper: ioctl: error adding target to table [ 13.475903] device-mapper: table: 253:0: thin-pool: unknown target type [ 13.482522] device-mapper: ioctl: error adding target to table [ 15.762761] device-mapper: table: 253:0: thin-pool: unknown target type [ 15.769381] device-mapper: ioctl: error adding target to table Ubuntu 18.04.6 LTS tx2nx-desktop ttyS0 tx2nx-desktop login: