=~=~=~=~=~=~=~=~=~=~=~= MobaXterm log 2019.11.23 14:46:57 =~=~=~=~=~=~=~=~=~=~=~= [0000.084] C> I2C command failed [0000.087] C> block index = (4) and rail_id = (1) [0000.092] C> Addr: Reg = [0xe8:0x07]: 336166925 [0000.097] C> I2C command failed [0000.100] C> block index = (5) and rail_id = (1) [0000.104] C> Addr: Reg = [0xe8:0x07]: 336166925 [0000.293] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b8ce67c) [0000.302] I> bit @ 0xd480000 [0000.305] I> Boot-device: eMMC [0000.308] I> sdmmc bdev is already initialized [0000.313] I> pmic: reset reason (nverc): 0x40 [0000.320] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.328] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.334] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x10 [0000.339] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x0 [0000.344] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x10 [0000.349] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x0 [0000.354] I> OEM carveouts init scrub in progress... [0000.430] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x10 [0000.435] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x0 [0000.440] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x10 [0000.445] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x0 [0000.450] I> Mb2 SDRAM scrub successful [0000.453] I> A/B: bin_type (16) slot 0 [0000.457] I> Loading partition bpmp-fw at 0xd7800000 [0000.462] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.467] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.483] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.488] I> A/B: bin_type (17) slot 0 [0000.492] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.497] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.503] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.511] I> Binary(17) of size 75680 is loaded @ 0xd79ed600 [0000.546] I> Loading SCE-FW ... [0000.549] I> A/B: bin_type (12) slot 0 [0000.553] I> Loading partition sce-fw at 0xd7300000 [0000.558] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.563] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.573] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.578] I> Init SCE [0000.581] I> Loading APE-FW ... [0000.584] I> A/B: bin_type (11) slot 0 [0000.587] I> Loading partition adsp-fw at 0xd7400000 [0000.592] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.598] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.607] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.613] I> Copy BTCM section [0000.616] I> A/B: bin_type (13) slot 0 [0000.619] I> Loading partition cpu-bootloader at 0x96000000 [0000.625] I> Reading two headers - addr:0x96000000 blocks:1 [0000.630] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.642] I> Binary(13) of size 277776 is loaded @ 0x96000000 [0000.647] I> A/B: bin_type (20) slot 0 [0000.651] I> Loading partition bootloader-dtb at 0x8520f400 [0000.656] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.662] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.674] I> Binary(20) of size 337168 is loaded @ 0x8520f400 [0000.680] I> A/B: bin_type (14) slot 0 [0000.683] I> Loading partition secure-os at 0x8530f600 [0000.688] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.694] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.706] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.713] I> TOS boot-params @ 0x85000000 [0000.717] I> TOS params prepared [0000.720] I> Loading EKS ... [0000.723] I> A/B: bin_type (15) slot 0 [0000.727] I> Loading partition eks at 0x8590f800 [0000.731] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.737] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.744] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.750] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.755] I> Copied encrypted keys [0000.759] I> boot profiler @ 0x235844000 [0000.763] I> boot profiler for TOS @ 0x235844000 [0000.767] I> Unhalting SCE [0000.770] I> Primary Memory Start:80000000 Size:70000000 [0000.775] I> Extended Memory Start:f0110000 Size:1456f0000 [0000.782] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):a28d87f09 NOTICE: BL31: Built : 21:15:42, Aug 12 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0000.986] I> Welcome to Cboot [0000.989] I> Cboot Version: t186-dcb303f9 [0000.993] I> CPU-BL Params @ 0x235800000 [0000.997] I> Dram Scrub in progress [0001.640] I> DRAM Scrub Successful [0001.644] I> 0) Base:0x00000000 Size:0x00000000 [0001.648] I> 1) Base:0x237f00000 Size:0x00100000 [0001.652] I> 2) Base:0x237e00000 Size:0x00100000 [0001.657] I> 3) Base:0x237d00000 Size:0x00100000 [0001.662] I> 4) Base:0x237c00000 Size:0x00100000 [0001.666] I> 5) Base:0x237b00000 Size:0x00100000 [0001.671] I> 6) Base:0x237800000 Size:0x00200000 [0001.675] I> 7) Base:0x237400000 Size:0x00400000 [0001.680] I> 8) Base:0x237a00000 Size:0x00100000 [0001.684] I> 9) Base:0x237300000 Size:0x00100000 [0001.689] I> 10) Base:0x236800000 Size:0x00800000 [0001.693] I> 11) Base:0x30000000 Size:0x00040000 [0001.698] I> 12) Base:0xf0000000 Size:0x00100000 [0001.702] I> 13) Base:0x30040000 Size:0x00001000 [0001.706] I> 14) Base:0x30048000 Size:0x00001000 [0001.711] I> 15) Base:0x30049000 Size:0x00001000 [0001.715] I> 16) Base:0x3004a000 Size:0x00001000 [0001.720] I> 17) Base:0x3004b000 Size:0x00001000 [0001.724] I> 18) Base:0x3004c000 Size:0x00001000 [0001.729] I> 19) Base:0x3004d000 Size:0x00001000 [0001.733] I> 20) Base:0x3004e000 Size:0x00001000 [0001.737] I> 21) Base:0x3004f000 Size:0x00001000 [0001.742] I> 22) Base:0x00000000 Size:0x00000000 [0001.746] I> 23) Base:0xf0100000 Size:0x00010000 [0001.751] I> 24) Base:0x00000000 Size:0x00000000 [0001.755] I> 25) Base:0x00000000 Size:0x00000000 [0001.760] I> 26) Base:0x00000000 Size:0x00000000 [0001.764] I> 27) Base:0x00000000 Size:0x00000000 [0001.768] I> 28) Base:0x84400000 Size:0x00400000 [0001.773] I> 29) Base:0x30000000 Size:0x00010000 [0001.777] I> 30) Base:0x238000000 Size:0x08000000 [0001.782] I> 31) Base:0x00000000 Size:0x00000000 [0001.786] I> 32) Base:0x236000000 Size:0x00600000 [0001.791] I> 33) Base:0x80000000 Size:0x70000000 [0001.795] I> 34) Base:0xf0110000 Size:0x1456f0000 [0001.800] I> 35) Base:0x00000000 Size:0x00000000 [0001.804] I> 36) Base:0x00000000 Size:0x00000000 [0001.809] I> 37) Base:0x2372e0000 Size:0x00020000 [0001.813] I> 38) Base:0x84000000 Size:0x00400000 [0001.817] I> 39) Base:0x96000000 Size:0x02000000 [0001.822] I> 40) Base:0x85000000 Size:0x01200000 [0001.826] I> 41) Base:0x235800000 Size:0x00500000 [0001.831] I> 42) Base:0x00000000 Size:0x00000000 [0001.835] I> 43) Base:0x00000000 Size:0x00000000 [0001.840] GIC-SPI Target CPU: 4 [0001.843] Interrupts Init done [0001.846] calling constructors [0001.849] initializing heap [0001.852] initializing threads [0001.855] initializing timers [0001.858] creating bootstrap completion thread [0001.863] top of bootstrap2() [0001.866] CPU: ARM Cortex A57 [0001.869] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.874] initializing platform [0001.878] I> Boot-device: eMMC [0001.881] I> sdmmc bdev is already initialized [0001.887] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.894] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.899] W> opt-in fuse is not set, skip fuse_burning [0001.904] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.910] W> No valid slot number is found in scratch register [0001.915] W> Return default slot: _a [0001.919] I> A/B: bin_type (21) slot 0 [0001.922] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.936] I> Kernel_dtb @0x80000000 [0001.939] I> Bl_dtb @0x8520f400 [0001.942] I> gpio framework initialized [0001.948] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.958] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.965] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.974] E> I2C: slave not found in slaves. [0001.978] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.986] E> I2C_DEV: Failed to send register address 0x00000004. [0001.992] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0002.001] E> tca9539_device_init: failed to write polar reg [0002.006] E> tegrabl_tca9539_init: failed to init device! [0002.011] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0002.018] E> I2C: slave not found in slaves. [0002.022] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0002.030] E> I2C_DEV: Failed to send register address 0x00000004. [0002.036] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0002.045] E> tca9539_device_init: failed to write polar reg [0002.050] E> tegrabl_tca9539_init: failed to init device! [0002.058] I> fixed regulator driver initialized [0002.090] I> register 'maxim' power off handle [0002.096] I> virtual i2c enabled [0002.099] I> registered 'maxim,max77620' pmic [0002.103] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0002.116] I> Find /i2c@c250000's alias i2c7 [0002.120] I> Reading eeprom i2c=7 address=0x50 [0002.149] I> Device at /i2c@c250000:0x50 [0002.153] I> Reading eeprom i2c=7 address=0x57 [0002.181] I> Device at /i2c@c250000:0x57 [0002.186] I> Find /i2c@c240000's alias i2c1 [0002.190] I> Reading eeprom i2c=1 address=0x51 [0002.195] E> I2C: slave not found in slaves. [0002.199] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.207] E> I2C_DEV: Failed to send register address 0x00000000. [0002.213] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.222] E> eeprom: Retry to read I2C slave device. [0002.227] E> I2C: slave not found in slaves. [0002.231] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.239] E> I2C_DEV: Failed to send register address 0x00000000. [0002.245] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.254] E> eeprom: Failed to read I2C slave device [0002.259] I> Eeprom read failed 0x3526070d [0002.263] I> Find /i2c@3160000's alias i2c0 [0002.267] I> Reading eeprom i2c=0 address=0x50 [0002.272] E> I2C: slave not found in slaves. [0002.276] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.284] E> I2C_DEV: Failed to send register address 0x00000000. [0002.290] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.299] E> eeprom: Failed to read I2C slave device [0002.304] I> Eeprom read failed 0x3526070d [0002.309] I> Find /i2c@3180000's alias i2c2 [0002.313] I> Reading eeprom i2c=2 address=0x54 [0002.317] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.322] C> GPIO driver for chip_id 0x2 could not be found [0002.327] E> cam_eeprom_read: Can't get gpio driver [0002.332] I> Eeprom read failed 0x4d4d000d [0002.336] I> Reading eeprom i2c=2 address=0x57 [0002.340] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.345] C> GPIO driver for chip_id 0x2 could not be found [0002.350] E> cam_eeprom_read: Can't get gpio driver [0002.355] I> Eeprom read failed 0x4d4d000d [0002.359] I> create_pm_ids: id: 3489-0000-300-K, len: 15 [0002.364] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.375] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0002.380] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0002.412] I> enabling 'vdd-hdmi' regulator [0002.416] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.424] E> cannot find any other nvdisp nodes [0002.429] E> no valid display unit config found in dtb [0002.434] W> display init failed [0002.438] initializing target [0002.441] calling apps_init() [0002.444] starting app kernel_boot_app [0002.450] I> found decompressor handler: lz4-legacy [0002.454] I> decompressing BMP blob ... [0002.464] I> Kernel type = Normal [0002.468] I> Loading kernel from partition ... [0002.472] W> No valid slot number is found in scratch register [0002.477] W> Return default slot: _a [0002.481] I> A/B: bin_type (24) slot 0 [0002.486] I> Boot image size read from image header: f2d10 [0002.491] I> Boot image load address: 0x0x80400000 [0002.495] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.258] I> Kernel hdr @0x80400000 [0003.261] I> Kernel dtb @0x80000000 [0003.264] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0003.272] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0003.281] I> Checking boot.img header magic ... [0003.286] I> [OK] [0003.287] I> Valid boot.img @ 0x80400000 [0003.291] I> decompressor handler not found [0003.295] I> Copying kernel image (477378 bytes) from 0x80400800 to 0x80800000 ... [0003.303] I> Done [0003.304] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0003.312] I> Updated bpmp info to DTB [0003.317] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0003.322] I> Updated initrd info to DTB [0003.325] W> WARN: Fail to override "console=none" in commandline [0003.331] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.339] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.346] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.353] I> disabled_core_mask: 0xffffff0c [0003.357] W> No valid slot number is found in scratch register [0003.363] W> Return default slot: _a [0003.366] I> Active slot suffix: [0003.369] I> add_boot_slot_suffix: slot_suffix = [0003.374] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2372e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x235840000 sdhci_tegra.en_boot_part_access=1 [0003.410] I> Updated bootarg info to DTB [0003.414] I> eeprom_get_mac_addr: MAC (type: 0): 00:ff:ff:ff:ff:ff [0003.420] I> eeprom_get_mac_addr: MAC (type: 1): 00:ff:ff:ff:ff:ff [0003.426] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:a9:2a:65 [0003.434] E> Found no plugin manager ids in source DT [0003.439] W> Add plugin manager ids from board info [0003.444] E> "plugin-manager" doesn't exist, creating [0003.449] E> "ids" doesn't exist, creating [0003.453] E> "connection" doesn't exist, creating [0003.457] E> "configs" doesn't exist, creating [0003.462] I> create_pm_ids: id: 3489-0000-300-K, len: 15 [0003.467] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.478] I> create_pm_ids: id: XXXX-XXXX-XXX-X, len: 15 [0003.483] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0003.494] I> Adding plugin-manager/ids/3489-0000-300=/i2c@c250000:module@0x50 [0003.501] E> "i2c@c250000" doesn't exist, creating [0003.506] E> "module@0x50" doesn't exist, creating [0003.511] I> Adding plugin-manager/ids/XXXX-XXXX-XXX=/i2c@c250000:module@0x57 [0003.518] E> "module@0x57" doesn't exist, creating [0003.524] I> Adding plugin-manager/ids/3489-0000-300-K [0003.531] I> Adding plugin-manager/configs/3489-mem-type 00 [0003.537] I> Adding plugin-manager/configs/3489-power-config 00 [0003.543] I> Adding plugin-manager/configs/3489-misc-config 00 [0003.549] I> Adding plugin-manager/configs/3489-modem-config 00 [0003.555] I> Adding plugin-manager/configs/3489-touch-config 00 [0003.561] I> Adding plugin-manager/configs/3489-display-config 00 [0003.567] I> Adding plugin-manager/cvm [0003.571] E> "chip-id" doesn't exist, creating [0003.575] I> Adding plugin-manager/chip-id/A02P [0003.579] E> "odm-data" doesn't exist, creating [0003.584] I> Adding /chosen/plugin-manager/odm-data [0003.593] I> added [base:0x80000000, size:0x70000000] to /memory [0003.599] I> added [base:0xf0200000, size:0x145600000] to /memory [0003.605] I> added [base:0x235e00000, size:0x200000] to /memory [0003.611] I> added [base:0x236600000, size:0x200000] to /memory [0003.617] I> added [base:0x237000000, size:0x200000] to /memory [0003.622] I> Updated memory info to DTB [0003.627] E> add_disp_param: failed to get display params for du=0 [0003.634] E> "reset" doesn't exist, creating [0003.639] E> "pmc-reset-reason" doesn't exist, creating [0003.644] E> "pmic-reset-reason" doesn't exist, creating [0003.650] I> Adding ecid(00000001643d458500000000120482c0) to DT [0003.656] I> disabled_core_mask: 0xffffff0c [0003.668] I> Add serial number:0420518010084 as DT property [0003.677] I> Plugin-manager override starting [0003.682] I> node /plugin-manager/fragement@0 matches [0003.692] I> node /plugin-manager/fragement@4 matches [0003.732] I> node /plugin-manager/fragment-p3310-c00-camera matches [0003.757] I> Disable plugin-manager status in FDT [0003.762] I> Plugin-manager override finished successfully [0003.767] I> tegrabl_load_kernel_and_dtb: Done [0003.771] E> tegrabl_display_clear: display is not initialized [0003.777] W> Boot logo display failed... [0003.781] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-gd917e08cec (Aug 12 2019 - 21:16:16 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 6.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 733 bytes read in 80 ms (8.8 KiB/s) L4T boot options 1:primary kernel Enter choice: 1:primary kernel Retrieving file: /boot/initrd 5565090 bytes read in 225 ms (23.6 MiB/s) Retrieving file: /boot/Image 34179080 bytes read in 857 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2372e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x235840000 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 0000000080057521 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-770) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Aug 12 21:29:52 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 145600000 [ 0.000000] OF: fdt: - 235e00000 , 200000 [ 0.000000] OF: fdt: - 236600000 , 200000 [ 0.000000] OF: fdt: - 237000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.520866] pca953x 0-0074: failed reading register [ 0.521382] pca953x 0-0077: failed reading register [ 1.092391] pre_t19x_iso_plat_register(): iso bandwidth 5924200KB is not available, client disp_0 [ 1.092442] pre_t19x_iso_plat_register(): iso bandwidth 3136300KB is not available, client disp_0 [ 1.324595] FAN: coudln't get the regulator [ 1.377137] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.377892] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 3.862007] cgroup: cgroup2: unknown option "nsdelegate" [ 5.249338] using random self ethernet address [ 5.260279] using random host ethernet address [ 5.354078] using random self ethernet address [ 5.389549] using random host ethernet address [ 5.571702] random: crng init done [ 5.575134] random: 7 urandom warning(s) missed due to ratelimiting [ 6.910388] CPU1: shutdown [ 6.966423] CPU2: shutdown Ubuntu 18.04.2 LTS nvidia-desktop ttyS0 nvidia-desktop login: nvidia Password: Last login: 11 18 23:22:14 CST 2019 on ttyS0 Welcome to Ubuntu 18.04.2 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 0 packages can be updated. 0 updates are security updates. nvidia@nvidia-desktop:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-770) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Aug 12 21:29:52 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 145600000 [ 0.000000] OF: fdt: - 235e00000 , 200000 [ 0.000000] OF: fdt: - 236600000 , 200000 [ 0.000000] OF: fdt: - 237000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1793024 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 19912 pages used for memmap [ 0.000000] Normal zone: 1269248 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1b676a000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1764920 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2372e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x235840000 sdhci_tegra.en_boot_part_access=1 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29424(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 6937004K/7172096K available (15230K kernel code, 2914K rwdata, 6628K rodata, 8576K init, 609K bss, 169556K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB) [ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095e0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095e0000 - 0xffffff8009e40000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a118808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a118808 - 0xffffff800a1b0dbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf06dc8000 ( 109 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1b7200000 ( 7026 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001554] Console: colour dummy device 80x25 [ 0.001559] console [tty0] enabled [ 0.001563] bootconsole [uart8250] disabled [ 0.001571] kmemleak: Kernel memory leak detector disabled [ 0.001581] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001588] pid_max: default: 32768 minimum: 301 [ 0.001903] Security Framework initialized [ 0.002061] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002066] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002672] ftrace: allocating 46938 entries in 184 pages [ 0.129119] sched-energy: Sched-energy-costs installed from DT [ 0.129130] ASID allocator initialised with 65536 entries [ 0.167734] tegra-id: chipid=21817. [ 0.167740] tegra-id: opt_subrevision=1. [ 0.167755] Tegra Revision: A02p SKU: 0x90 CPU Process: 0 SoC Process: 0 [ 0.167762] DTS File Name: /home/hzy/NVIDIA/public_sources/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3489-1000-a00-00-base.dts [ 0.167767] DTB Build time: [ 0.213736] CPU1: Booted secondary processor [4e0f0030] [ 0.245326] CPU2: Booted secondary processor [4e0f0030] [ 0.277114] CPU3: Booted secondary processor [411fd073] [ 0.309098] CPU4: Booted secondary processor [411fd073] [ 0.341096] CPU5: Booted secondary processor [411fd073] [ 0.341151] Brought up 6 CPUs [ 0.341155] SMP: Total of 6 processors activated. [ 0.341160] CPU features: detected feature: 32-bit EL0 Support [ 0.341946] CPU: All CPU(s) started at EL2 [ 0.341978] alternatives: patching kernel code [ 0.351492] devtmpfs: initialized [ 0.387658] Initilizing CustomIPI irq domain [ 0.387859] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.387880] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.388801] pinctrl core: initialized pinctrl subsystem [ 0.389019] OS set in device tree is not L4T. [ 0.389190] regulator-dummy: no parameters [ 0.389338] Initializing plugin-manager [ 0.389394] Plugin module not found [ 0.389430] Plugin-manager status disabled [ 0.391205] NET: Registered protocol family 16 [ 0.391883] pstore: using zlib compression [ 0.391897] console [pstore-1] enabled [ 0.391899] pstore: Registered ramoops as persistent store backend [ 0.391903] ramoops: attached 0x200000@0x235880000, ecc: 0/0 [ 0.408687] cpuidle: using governor menu [ 0.410143] bpmp: waiting for handshake [ 0.410148] bpmp: handshake completed [ 0.410159] bpmp: synchronizing channels [ 0.410177] bpmp: channels synchronized [ 0.410180] bpmp: mail init ok [ 0.412188] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.412193] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.412197] arm-smmu 12000000.iommu: stage 1 translation [ 0.412200] arm-smmu 12000000.iommu: stage 2 translation [ 0.412202] arm-smmu 12000000.iommu: nested translation [ 0.412208] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.412213] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.412217] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.412222] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.412225] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.414306] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000) [ 0.414319] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.416889] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.418654] Registering BPMP clocks... [ 0.418751] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.420855] tegra_powergate_init: DONE [ 0.420863] DTS File Name: /home/hzy/NVIDIA/public_sources/kernel_src/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3489-1000-a00-00-base.dts [ 0.420867] DTB Build time: [ 0.422852] Tegra reboot handler registered. [ 0.424350] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.424414] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.424426] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.424428] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.424431] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.424587] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.424598] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.424961] iommu: Adding device 3460000.sdhci to group 0 [ 0.425443] iommu: Adding device 3440000.sdhci to group 1 [ 0.425903] iommu: Adding device 3400000.sdhci to group 2 [ 0.426999] iommu: Adding device 3507000.ahci-sata to group 3 [ 0.427010] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.427454] iommu: Adding device 3160000.i2c to group 4 [ 0.427899] iommu: Adding device c240000.i2c to group 5 [ 0.428252] iommu: Adding device 3180000.i2c to group 6 [ 0.428588] iommu: Adding device 3190000.i2c to group 7 [ 0.429041] iommu: Adding device 31b0000.i2c to group 8 [ 0.429376] iommu: Adding device 31c0000.i2c to group 9 [ 0.429701] iommu: Adding device c250000.i2c to group 10 [ 0.430030] iommu: Adding device 31e0000.i2c to group 11 [ 0.431508] iommu: Adding device 3210000.spi to group 12 [ 0.431855] iommu: Adding device c260000.spi to group 13 [ 0.432183] iommu: Adding device 3240000.spi to group 14 [ 0.432877] iommu: Adding device 3100000.serial to group 15 [ 0.433215] iommu: Adding device 3110000.serial to group 16 [ 0.433544] iommu: Adding device c280000.serial to group 17 [ 0.433869] iommu: Adding device 3130000.serial to group 18 [ 0.435212] iommu: Adding device 2490000.ether_qos to group 19 [ 0.435226] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.435914] iommu: Adding device b000000.rtcpu to group 20 [ 0.438127] iommu: Adding device 13e10000.host1x to group 21 [ 0.438439] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.438760] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.439070] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.439377] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.439689] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.440019] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.440337] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.440646] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.441170] iommu: Adding device 150c0000.nvcsi to group 30 [ 0.441820] iommu: Adding device 15700000.vi to group 31 [ 0.442173] iommu: Adding device 15600000.isp to group 32 [ 0.442626] iommu: Adding device 15210000.nvdisplay to group 33 [ 0.443218] iommu: Adding device 15340000.vic to group 34 [ 0.443434] iommu: Adding device 154c0000.nvenc to group 35 [ 0.443657] iommu: Adding device 15480000.nvdec to group 36 [ 0.443998] iommu: Adding device 15380000.nvjpg to group 37 [ 0.444214] iommu: Adding device 15500000.tsec to group 38 [ 0.444432] iommu: Adding device 15100000.tsecb to group 39 [ 0.445124] iommu: Adding device 15810000.se to group 40 [ 0.445336] iommu: Adding device 15820000.se to group 41 [ 0.445553] iommu: Adding device 15830000.se to group 42 [ 0.445776] iommu: Adding device 15840000.se to group 43 [ 0.446642] iommu: Adding device smmu_test to group 44 [ 0.447249] mc: mapped MMIO address: 0xffffff800a690000 -> 0x2c10000 [ 0.447260] mc: mapped MMIO address: 0xffffff800a6b0000 -> 0x2c20000 [ 0.447270] mc: mapped MMIO address: 0xffffff800a6d0000 -> 0x2c30000 [ 0.447280] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.447289] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.447297] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.447307] mc-err: mcerr ops are set to t18x [ 0.447454] dram-ecc: DRAM ECC enabled-MC_ECC_CONTROL:0x0000000d [ 0.447476] dram-ecc: SCE-R5 is booted with Camera FW [ 0.447478] dram-ecc: DRAM ECC interrupts handled in Camera FW [ 0.448574] iommu: Adding device 3530000.xhci to group 45 [ 0.448586] arm-smmu: forcing sodev map for 3530000.xhci [ 0.449075] iommu: Adding device 3550000.xudc to group 46 [ 0.449085] arm-smmu: forcing sodev map for 3550000.xudc [ 0.449791] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.449796] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.450368] iommu: Adding device 17000000.gp10b to group 47 [ 0.451404] tegra-reset 5000000.clock: registered 193 resets. [ 0.453610] iommu: Adding device d000000.bpmp to group 48 [ 0.453820] bpmp: ping status is 0 [ 0.453920] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.456423] bpmp d000000.bpmp: probe ok [ 0.459603] iommu: Adding device 2600000.dma to group 49 [ 0.460790] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.460812] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.460837] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.460855] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.460874] GPIO line 457 (camera-control-output-low) hogged as output/low [ 0.460891] GPIO line 426 (camera-control-output-low) hogged as output/low [ 0.461089] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.464787] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.466349] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.466364] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.466699] iommu: Adding device sound to group 51 [ 0.467054] iommu: Adding device 3510000.hda to group 52 [ 0.474574] iommu: Adding device c1a0000.aon to group 53 [ 0.475017] vdd-ac-bat: 5000 mV [ 0.476725] vdd-1v8-ap: 1800 mV [ 0.501345] random: fast init done [ 0.510371] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.516301] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.516821] SCSI subsystem initialized [ 0.517089] libata version 3.00 loaded. [ 0.517352] usbcore: registered new interface driver usbfs [ 0.517412] usbcore: registered new interface driver hub [ 0.517545] usbcore: registered new device driver usb [ 0.520833] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ 0.520866] pca953x 0-0074: failed reading register [ 0.520968] pca953x: probe of 0-0074 failed with error -121 [ 0.521328] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.521382] pca953x 0-0077: failed reading register [ 0.521473] pca953x: probe of 0-0077 failed with error -121 [ 0.534021] max77620 4-003c: PMIC Version OTP:0x4D and ES:0x1 [ 0.541960] vddio-ddr: at 1125 mV [ 0.545769] avdd_dsi_csi: 1200 mV [ 0.549775] vdd-1v8: 1800 mV [ 0.553362] vdd-3v3-sys: 3300 mV [ 0.554082] max77620-sd4: at 600 mV [ 0.555275] spmic-ldo0: at 1800 mV [ 0.556243] spmic-ldo1: at 800 mV [ 0.561368] vddio-3v3: 3300 mV [ 0.562158] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.565403] vdd-rtc: at 800 mV [ 0.566324] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.569363] spmic-ldo6: at 1500 mV [ 0.573363] vdd-pex-1v00: 1000 mV [ 0.574129] dvdd-pex: 1000 mV [ 0.574789] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.574966] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.575304] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.577648] max77620 4-003c: max77620 probe successful [ 0.578237] media: Linux media interface: v0.10 [ 0.578298] Linux video capture interface: v2.00 [ 0.582716] pps_core: LinuxPPS API ver. 1 registered [ 0.582730] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.582767] PTP clock support registered [ 0.583449] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.583482] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.587730] tegra_fiq_debugger_init: found FIQ source (IRQ 386) [ 0.593127] trusty trusty: trusty version: Built: 21:17:07 Aug 12 2019 [ 0.593170] trusty trusty: selected api version: 3 (requested 3) [ 0.594312] Advanced Linux Sound Architecture Driver Initialized. [ 0.594874] Bluetooth: Core ver 2.22 [ 0.594920] NET: Registered protocol family 31 [ 0.594932] Bluetooth: HCI device and connection manager initialized [ 0.594950] Bluetooth: HCI socket layer initialized [ 0.594965] Bluetooth: L2CAP socket layer initialized [ 0.595013] Bluetooth: SCO socket layer initialized [ 0.595954] en-vdd-sd: 3300 mV [ 0.596537] vdd-usb0-5v: 5000 mV [ 0.596952] vdd-usb1-5v: 5000 mV [ 0.597644] vdd-3v3: 3300 mV [ 0.597986] en-vdd-vcm-2v8: 2800 mV [ 0.598318] vdd-sys-bl: 3300 mV [ 0.601428] camchar: rtcpu character device driver loaded [ 0.602092] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.604015] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.605447] clocksource: Switched to clocksource arch_sys_counter [ 0.648157] VFS: Disk quotas dquot_6.6.0 [ 0.648382] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.649000] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.649986] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.649996] nvmap_page_pool_init: Total RAM pages: 1750635 [ 0.650002] nvmap_page_pool_init: nvmap page pool size: 218829 pages (854 MB) [ 0.650134] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.654076] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.666301] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.666496] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.666921] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.667017] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.667163] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.667307] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.667514] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.667728] la/ptsa driver initialized. [ 0.667740] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.667745] pre_t19x_iso_plat_init(): max_iso_bw=7680000KB [ 0.668884] NET: Registered protocol family 2 [ 0.670975] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.671682] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.672468] TCP: Hash tables configured (established 65536 bind 65536) [ 0.672530] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.672660] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.673695] NET: Registered protocol family 1 [ 0.674830] RPC: Registered named UNIX socket transport module. [ 0.674837] RPC: Registered udp transport module. [ 0.674842] RPC: Registered tcp transport module. [ 0.674847] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.674857] PCI: CLS 0 bytes, default 64 [ 0.675094] Trying to unpack rootfs image as initramfs... [ 0.868110] Freeing initrd memory: 5432K [ 0.889966] host1x 13e10000.host1x: initialized [ 0.892088] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.896839] audit: initializing netlink subsys (disabled) [ 0.896887] audit: type=2000 audit(0.784:1): initialized [ 0.897644] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.909307] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.912059] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.913681] 9p: Installing v9fs 9p2000 file system support [ 0.919513] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.919645] io scheduler noop registered [ 0.920259] io scheduler cfq registered (default) [ 0.925198] gic 2a41000.agic-controller: GIC IRQ controller registered [ 0.984925] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 1.023838] iommu: Adding device 2993000.adsp to group 55 [ 1.025004] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.028221] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.032254] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.033735] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.035006] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.036292] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.039115] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 1.040216] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 1.040650] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 1.040859] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.041108] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.041120] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 1.044026] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 1.045432] tsec 15500000.tsec: initialized [ 1.046760] tsec 15100000.tsecb: initialized [ 1.051199] nvdec 15480000.nvdec: initialized [ 1.059266] falcon 15340000.vic: initialized [ 1.060975] falcon 154c0000.nvenc: initialized [ 1.062584] falcon 15380000.nvjpg: initialized [ 1.066701] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.068345] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.070021] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.071613] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.073216] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.074815] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.076395] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.077874] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.081329] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.081343] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.081380] tegradccommon 15200000.dc_common: dma mapping done [ 1.082599] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.082677] generic_infoframe_type: 0x87 [ 1.082855] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.082899] tegradc 15210000.nvdisplay: Display dc.ffffff800b690000 registered with id=0 [ 1.092391] pre_t19x_iso_plat_register(): iso bandwidth 5924200KB is not available, client disp_0 [ 1.092442] pre_t19x_iso_plat_register(): iso bandwidth 3136300KB is not available, client disp_0 [ 1.092591] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 2787800 KB/s [ 1.092598] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 102000000 Hz [ 1.092604] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 49070000 Hz [ 1.092902] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.092912] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.094448] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 10 channels [ 1.095270] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.096946] kfuse 3830000.kfuse: initialized [ 1.099091] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.099100] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.099340] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.107562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.110840] console [ttyS0] disabled [ 1.110910] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 1.138733] console [ttyS0] enabled [ 1.139523] tegradc 15210000.nvdisplay: probed [ 1.140807] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 1.142708] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 1.143331] serial-tegra 3130000.serial: RX in PIO mode [ 1.144940] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 1.146424] [drm] Initialized [ 1.149911] Console: switching to colour frame buffer device 240x67 [ 1.150167] tegradc 15210000.nvdisplay: fb registered [ 1.150428] gpio tegra-gpio wake21 for gpio=121(P:1) [ 1.152047] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.152149] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.152251] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.158270] Parent Clock set for DC plld2 [ 1.161622] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.162811] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.162817] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.162859] brd: module loaded [ 1.171809] loop: module loaded [ 1.171883] tegra_profiler: version: 1.134, samples/io: 47/26 [ 1.172031] tegra_profiler: auth: init [ 1.172670] THERMAL EST: found 3 subdevs [ 1.172677] THERMAL EST num_resources: 0 [ 1.172682] [THERMAL EST subdev 0] [ 1.172691] [THERMAL EST subdev 1] [ 1.172723] [THERMAL EST subdev 2] [ 1.173029] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 1.173034] THERMAL EST: thz register success. [ 1.173280] nct1008_nct72 7-004c: starting parse dt [ 1.173359] THERMAL EST: end of probe, return err: 0 [ 1.173364] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 1.173404] nct1008_nct72 7-004c: success parsing dt [ 1.173564] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 1.174794] hisi_sas: driver version v1.6 [ 1.179363] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.179376] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 1.184713] scsi host0: tegra_ahci [ 1.185661] scsi host1: tegra_ahci [ 1.185803] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 1.185809] ata2: DUMMY [ 1.191633] libphy: Fixed MDIO Bus: probed [ 1.192103] tun: Universal TUN/TAP device driver, 1.6 [ 1.192108] tun: (C) 1999-2004 Max Krasnyansky [ 1.193861] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.193867] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.193903] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.193907] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.193937] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.193940] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.193973] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.193977] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.195514] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 1.198895] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.198899] Extcon AUX1(HDMI) enable [ 1.199333] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b a9 2a 65 [ 1.199460] libphy: dwc_phy: probed [ 1.199914] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 1.202153] PPP generic driver version 2.4.2 [ 1.202441] PPP BSD Compression module registered [ 1.202448] PPP Deflate Compression module registered [ 1.202469] PPP MPPE Compression module registered [ 1.202475] NET: Registered protocol family 24 [ 1.202527] usbcore: registered new interface driver r8152 [ 1.202563] usbcore: registered new interface driver asix [ 1.202595] usbcore: registered new interface driver ax88179_178a [ 1.202620] usbcore: registered new interface driver cdc_ether [ 1.202644] usbcore: registered new interface driver net1080 [ 1.202668] usbcore: registered new interface driver cdc_subset [ 1.202692] usbcore: registered new interface driver zaurus [ 1.202733] usbcore: registered new interface driver cdc_ncm [ 1.202907] VFIO - User Level meta-driver version: 0.3 [ 1.205617] nct1008_nct72 7-004c: LOC shutdown limit 110 [ 1.206175] nct1008_nct72 7-004c: EXT shutdown limit 110 [ 1.208610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.208629] ehci-pci: EHCI PCI platform driver [ 1.208690] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.208700] ohci-pci: OHCI PCI platform driver [ 1.208728] ohci-platform: OHCI generic platform driver [ 1.214144] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 1.215808] tegra-xusb 3530000.xhci: extcon 0: ffffffc1abdb2c00 id [ 1.216591] usbcore: registered new interface driver uas [ 1.216630] usbcore: registered new interface driver usb-storage [ 1.216695] usbcore: registered new interface driver usbserial [ 1.217522] tegra-xusb 3530000.xhci: Firmware timestamp: 2018-12-26 10:30:04 UTC, Version: 55.12 release [ 1.221373] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.222476] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.222904] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.224354] mousedev: PS/2 mouse device common for all mice [ 1.224457] usbcore: registered new interface driver xpad [ 1.224660] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.238983] nct1008_nct72 7-004c: initial LOC temp: 20000 [ 1.239308] nct1008_nct72 7-004c: initial EXT temp: 32000 [ 1.239944] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 1.240319] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 1.240507] nct1008_nct72 7-004c: nct1008_probe: initialized [ 1.245505] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.245531] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 1.246362] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 1.246417] tegra-xusb 3530000.xhci: irq 70, io mem 0x03530000 [ 1.246664] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.246673] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.246678] usb usb1: Product: xHCI Host Controller [ 1.246684] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.246689] usb usb1: SerialNumber: 3530000.xhci [ 1.247183] hub 1-0:1.0: USB hub found [ 1.247225] hub 1-0:1.0: 4 ports detected [ 1.247612] tegra-xusb 3530000.xhci: xHCI Host Controller [ 1.247624] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 1.247827] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.247834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.247840] usb usb2: Product: xHCI Host Controller [ 1.247845] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.247849] usb usb2: SerialNumber: 3530000.xhci [ 1.248241] hub 2-0:1.0: USB hub found [ 1.248296] hub 2-0:1.0: 3 ports detected [ 1.309673] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.311062] Wake73 for irq=42 [ 1.312379] rtc rtc1: alarm rtc device [ 1.312396] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.312422] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.312652] i2c /dev entries driver [ 1.316083] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 1.322905] parse_throttle_dt_data: Num cap clks = 4 [ 1.322913] parse_throttle_dt_data: clk=mcpu type=1 [ 1.322919] parse_throttle_dt_data: clk=bcpu type=2 [ 1.322929] parse_throttle_dt_data: clk=gpu type=4 [ 1.322934] parse_throttle_dt_data: clk=emc type=3 [ 1.324025] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.324595] FAN: coudln't get the regulator [ 1.330732] device-mapper: uevent: version 1.0.3 [ 1.331566] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.334639] tegradc 15210000.nvdisplay: blank - powerdown [ 1.334649] cpufreq: platform driver Initialization: pass [ 1.335322] cpuidle: Initializing cpuidle driver init for Denver cluster [ 1.335442] cpuidle: Initializing cpuidle driver init for A57 cluster [ 1.342193] sdhci: Secure Digital Host Controller Interface driver [ 1.342194] sdhci: Copyright(c) Pierre Ossman [ 1.342196] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.343411] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 1.345387] CMDQ: cmdq_platfm_init successful [ 1.346737] CQE: CMD_TIMING bit set for R1B DCMD [ 1.350734] usb usb1: usb_suspend_both: status 0 [ 1.350924] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 1.355918] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 1.355965] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 1.357844] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 1.359697] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257 [ 1.364908] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 1.365962] tegra-se-nvhost 15810000.se: initialized [ 1.367228] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 1.367965] tegra-se-nvhost 15820000.se: initialized [ 1.369150] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 1.369836] tegra-se-nvhost 15830000.se: initialized [ 1.370780] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 1.371432] tegra-se-nvhost 15840000.se: initialized [ 1.372484] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 1.372790] hidraw: raw HID events driver (C) Jiri Kosina [ 1.373807] usbcore: registered new interface driver usbhid [ 1.373808] usbhid: USB HID core driver [ 1.377115] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 1.377137] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.377399] ina3221x: probe of 0-0042 failed with error -121 [ 1.377866] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 1.377892] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 1.378085] ina3221x: probe of 0-0043 failed with error -121 [ 1.379735] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.379738] Extcon AUX1(HDMI) disable [ 1.380973] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 1.383200] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 1.383490] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 1.383621] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 1.383827] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 1.384526] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 1.384596] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 1.384650] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 1.384696] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 1.384791] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 1.385118] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 1.385120] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 1.389551] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.394463] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.398685] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 1.400726] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 1.401298] tegra186-aondbg aondbg: aondbg driver probe() OK [ 1.401552] register_ari_mca_banks: Registered MCA ROC:IOB [ 1.401631] register_ari_mca_banks: Registered MCA ROC:CCE [ 1.402138] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.402141] tegra18-bridge 2390000.axi2apb: enabled timeout = 16684000 [ 1.402143] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 1.402436] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.402438] tegra18-bridge 23a0000.axi2apb: enabled timeout = 16684000 [ 1.402439] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 1.402735] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.402737] tegra18-bridge 23b0000.axi2apb: enabled timeout = 16684000 [ 1.402738] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 1.402789] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.402790] tegra18-bridge 23c0000.axi2apb: enabled timeout = 16684000 [ 1.402792] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 1.402847] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.402851] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 1.402853] tegra18-bridge 23d0000.axi2apb: enabled timeout = 16684000 [ 1.402854] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 1.402902] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.402905] tegra18-bridge 2100000.axip2p: enabled timeout = 16684000 [ 1.402907] tegra18-bridge 2100000.axip2p: bridge probed OK [ 1.402965] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.402968] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.402970] tegra18-bridge 2110000.axip2p: enabled timeout = 16684000 [ 1.402972] tegra18-bridge 2110000.axip2p: bridge probed OK [ 1.403021] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.403024] tegra18-bridge 2120000.axip2p: enabled timeout = 16684000 [ 1.403026] tegra18-bridge 2120000.axip2p: bridge probed OK [ 1.403073] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.403076] tegra18-bridge 2130000.axip2p: enabled timeout = 16684000 [ 1.403078] tegra18-bridge 2130000.axip2p: bridge probed OK [ 1.403179] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.403181] tegra18-bridge 2140000.axip2p: enabled timeout = 16684000 [ 1.403183] tegra18-bridge 2140000.axip2p: bridge probed OK [ 1.403229] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.403233] tegra18-bridge 2150000.axip2p: enabled timeout = 16684000 [ 1.403234] tegra18-bridge 2150000.axip2p: bridge probed OK [ 1.403282] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.403286] tegra18-bridge 2160000.axip2p: enabled timeout = 16684000 [ 1.403287] tegra18-bridge 2160000.axip2p: bridge probed OK [ 1.403342] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.403346] tegra18-bridge 2170000.axip2p: enabled timeout = 16684000 [ 1.403347] tegra18-bridge 2170000.axip2p: bridge probed OK [ 1.403620] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.403624] tegra18-bridge 2180000.axip2p: enabled timeout = 16684000 [ 1.403626] tegra18-bridge 2180000.axip2p: bridge probed OK [ 1.404097] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.404102] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 172 MHZ, timeout = 97000 useconds [ 1.404105] tegra18-bridge 2190000.axip2p: enabled timeout = 16684000 [ 1.404106] tegra18-bridge 2190000.axip2p: bridge probed OK [ 1.404164] **** A57 ECC: Enabled [ 1.404166] tegra18_a57_serr_init: on CPU 0 a A57 Core [ 1.404237] tegra18x_actmon d230000.actmon: in actmon_register()... [ 1.404684] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 1.405198] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 1.405318] denver_knobs_init:MTS_VERSION:43068234 [ 1.406952] nvpmodel: initialized successfully [ 1.409455] trusty-virtio trusty:virtio: initializing [ 1.409574] trusty_ipc virtio0: vring0: va(pa) ffffffc1a7bf2000(0) qsz 32 notifyid 1 [ 1.409580] trusty_ipc virtio0: vring1: va(pa) ffffffc1a7bd4000(0) qsz 32 notifyid 2 [ 1.409642] trusty-virtio trusty:virtio: initializing done [ 1.409647] gpio tegra-gpio wake71 for gpio=125(P:5) [ 1.409728] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 1.409739] trusty_ipc virtio0: is online [ 1.411856] usbcore: registered new interface driver snd-usb-audio [ 1.419026] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 1.419154] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 1.423024] tegradc 15210000.nvdisplay: unblank [ 1.425295] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.425592] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.425761] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.427455] Parent Clock set for DC plld2 [ 1.430822] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.432142] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.432150] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.454981] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 1.469613] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.469616] Extcon AUX1(HDMI) enable [ 1.472347] mmc0: periodic cache flush enabled [ 1.472360] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.472773] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 1.477062] mmcblk0boot0: mmc0:0001 032G34 partition 1 8.00 MiB [ 1.477285] mmcblk0boot1: mmc0:0001 032G34 partition 2 8.00 MiB [ 1.480129] OPE platform probe [ 1.480255] OPE platform probe successful [ 1.481597] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 1.483282] tegra-asoc: sound: This is a dummy codec [ 1.484991] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 [ 1.499808] ata1: SATA link down (SStatus 0 SControl 300) [ 1.501512] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 1.554199] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.554294] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.554380] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.554463] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.554558] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.554666] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.554751] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.554835] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.554918] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.555001] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.555087] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 1.555170] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 1.555253] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 1.555346] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 1.555458] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 1.555548] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 1.555661] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 1.555749] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 1.555837] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 1.555925] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 1.586123] u32 classifier [ 1.586126] Actions configured [ 1.586255] Initializing XFRM netlink socket [ 1.587999] NET: Registered protocol family 10 [ 1.589484] NET: Registered protocol family 17 [ 1.589497] NET: Registered protocol family 15 [ 1.589714] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.589800] Bluetooth: RFCOMM socket layer initialized [ 1.589814] Bluetooth: RFCOMM ver 1.11 [ 1.589820] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.589825] Bluetooth: HIDP socket layer initialized [ 1.589846] 9pnet: Installing 9P2000 support [ 1.589893] Key type dns_resolver registered [ 1.590155] Registered cp15_barrier emulation handler [ 1.590172] Registered setend emulation handler [ 1.591875] registered taskstats version 1 [ 1.596328] isp 15600000.isp: initialized [ 1.601570] nvcsi 150c0000.nvcsi: initialized [ 1.608247] tegra-vi4 15700000.vi: initialized [ 1.608941] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 1.609001] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 1.609055] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 1.609175] input: gpio-keys as /devices/gpio-keys/input/input2 [ 1.609688] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint. [ 1.609692] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint. [ 1.642179] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:13 UTC (946688413) [ 1.644103] mmcblk mmc0:0001: Card claimed for testing. [ 1.670899] bpmp: mounted debugfs mirror [ 1.672981] bwmgr: missing cdev-type property [ 1.678603] spmic-ldo0: disabling [ 1.678796] spmic-ldo1: disabling [ 1.678948] en-vdd-sd: disabling [ 1.678952] vdd-usb0-5v: disabling [ 1.678954] vdd-usb1-5v: disabling [ 1.678957] vdd-3v3: disabling [ 1.678959] en-vdd-vcm-2v8: disabling [ 1.678961] vdd-sys-bl: disabling [ 1.678965] ALSA device list: [ 1.678968] #0: tegra-hda at 0x3518000 irq 383 [ 1.678970] #1: tegra-snd-t186ref-mobile-rt565x [ 1.909909] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.315840] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.317867] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 2.721150] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.127320] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.497152] extcon-disp-state external-connection:disp-state: cable 40 state 1 [ 3.497155] Extcon HDMI: HPD enabled [ 3.497179] tegradc 15210000.nvdisplay: hdmi: plugged [ 3.499131] Freeing unused kernel memory: 8576K [ 3.537551] L4T-INITRD Build DATE: Sat Jan 1 01:00:15 UTC 2000 [ 3.541496] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 3.543552] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 3.546092] Root device found: mmcblk0p1 [ 3.548554] Found dev node: /dev/mmcblk0p1 [ 3.596450] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 3.596453] EXT4-fs (mmcblk0p1): recovery complete [ 3.599260] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.600583] Rootfs mounted over mmcblk0p1 [ 3.636660] Switching from initrd to actual rootfs [ 3.748139] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 3.748492] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 3.778944] systemd[1]: System time before build time, advancing clock. [ 3.814943] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.862007] cgroup: cgroup2: unknown option "nsdelegate" [ 3.887410] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.890718] systemd[1]: Detected architecture arm64. [ 3.985549] systemd[1]: Set hostname to . [ 4.074048] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.074074] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.272082] random: systemd: uninitialized urandom read (16 bytes read) [ 4.275998] systemd[1]: Created slice System Slice. [ 4.276703] random: systemd: uninitialized urandom read (16 bytes read) [ 4.276955] systemd[1]: Listening on Journal Audit Socket. [ 4.277019] random: systemd: uninitialized urandom read (16 bytes read) [ 4.277280] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.277848] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.278323] systemd[1]: Listening on Syslog Socket. [ 4.327191] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.369626] Wake76 for irq=199 [ 4.369632] Wake77 for irq=199 [ 4.369635] Wake78 for irq=199 [ 4.369637] Wake79 for irq=199 [ 4.369640] Wake80 for irq=199 [ 4.369642] Wake81 for irq=199 [ 4.369644] Wake82 for irq=199 [ 4.369678] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 4.369683] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 4.469926] usb usb2: usb_suspend_both: status 0 [ 4.743612] systemd-journald[2302]: Received request to flush runtime journal from PID 1 [ 5.249338] using random self ethernet address [ 5.260279] using random host ethernet address [ 5.291688] Mass Storage Function, version: 2009/09/11 [ 5.291694] LUN: removable file: (no medium) [ 5.354078] using random self ethernet address [ 5.389549] using random host ethernet address [ 5.527181] rndis0: HOST MAC ea:a5:50:b4:18:a0 [ 5.527276] rndis0: MAC ea:a5:50:b4:18:a1 [ 5.528229] usb0: HOST MAC ea:a5:50:b4:18:a2 [ 5.528258] usb0: MAC ea:a5:50:b4:18:a3 [ 5.528277] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.530821] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.530840] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.530868] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.532516] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.532542] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.539985] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.540008] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.541141] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.558702] l4tbr0: port 1(rndis0) entered blocking state [ 5.558708] l4tbr0: port 1(rndis0) entered disabled state [ 5.565702] device rndis0 entered promiscuous mode [ 5.571702] random: crng init done [ 5.575134] random: 7 urandom warning(s) missed due to ratelimiting [ 5.583324] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.597719] l4tbr0: port 2(usb0) entered blocking state [ 5.597727] l4tbr0: port 2(usb0) entered disabled state [ 5.615181] device usb0 entered promiscuous mode [ 5.654183] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.867710] nvgpu: 17000000.gp10b railgate_enable_store:283 [INFO] railgate is disabled. [ 6.910388] CPU1: shutdown [ 6.910393] psci: CPU1 killed. [ 6.925474] tegra-xusb 3530000.xhci: entering ELPG [ 6.928370] tegra-xusb 3530000.xhci: entering ELPG done [ 6.966423] CPU2: shutdown [ 6.983974] zram: Added device: zram0 [ 6.984381] zram: Added device: zram1 [ 6.985534] psci: Retrying again to check for CPU kill [ 6.985538] psci: CPU2 killed. [ 6.986860] zram: Added device: zram2 [ 6.995106] zram: Added device: zram3 [ 6.996671] zram: Added device: zram4 [ 7.054617] zram0: detected capacity change from 0 to 718495744 [ 7.072237] Adding 701652k swap on /dev/zram0. Priority:5 extents:1 across:701652k SS [ 7.075578] zram1: detected capacity change from 0 to 718495744 [ 7.097394] Adding 701652k swap on /dev/zram1. Priority:5 extents:1 across:701652k SS [ 7.101278] zram2: detected capacity change from 0 to 718495744 [ 7.118099] Adding 701652k swap on /dev/zram2. Priority:5 extents:1 across:701652k SS [ 7.127325] zram3: detected capacity change from 0 to 718495744 [ 7.139389] Adding 701652k swap on /dev/zram3. Priority:5 extents:1 across:701652k SS [ 7.143389] zram4: detected capacity change from 0 to 718495744 [ 7.155593] Adding 701652k swap on /dev/zram4. Priority:5 extents:1 across:701652k SS [ 7.200924] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.282550] gpio tegra-gpio wake18 for gpio=101(M:5) [ 7.285287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.863877] tegradc 15210000.nvdisplay: blank - powerdown [ 9.915657] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 9.915659] Extcon AUX1(HDMI) disable [ 9.938019] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 9.938099] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 9.938733] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 9.938897] tegradc 15210000.nvdisplay: unblank [ 9.939835] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 9.939910] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 9.939982] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 9.941211] Parent Clock set for DC plld2 [ 9.946267] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 9.947444] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 9.947451] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 9.983001] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 9.983006] Extcon AUX1(HDMI) enable [ 9.983570] tegradc 15210000.nvdisplay: unblank [ 10.508104] fuse init (API version 7.26) nvidia@nvidia-desktop:~$