[0000.226] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c700205d) [0000.234] I> bit @ 0xd480000 [0000.237] I> Boot-device: eMMC [0000.244] I> sdmmc bdev is already initialized [0000.249] I> pmic: reset reason (nverc) : 0x80 [0000.281] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.299] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.305] W> No valid slot number is found in scratch register [0000.311] W> Return default slot: _a [0000.314] I> A/B: bin_type (16) slot 0 [0000.318] I> Loading partition bpmp-fw at 0xd7800000 [0000.323] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.328] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.353] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.359] W> No valid slot number is found in scratch register [0000.365] W> Return default slot: _a [0000.368] I> A/B: bin_type (17) slot 0 [0000.372] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.377] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.382] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.403] I> Binary(17) of size 314992 is loaded @ 0xd79b3000 [0000.526] I> Loading SCE-FW ... [0000.529] W> No valid slot number is found in scratch register [0000.534] W> Return default slot: _a [0000.538] I> A/B: bin_type (12) slot 0 [0000.541] I> Loading partition sce-fw at 0xd7300000 [0000.546] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.552] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.571] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.576] I> Init SCE [0000.579] I> Loading APE-FW ... [0000.582] W> No valid slot number is found in scratch register [0000.587] W> Return default slot: _a [0000.591] I> A/B: bin_type (11) slot 0 [0000.594] I> Loading partition adsp-fw at 0xd7400000 [0000.599] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.605] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.624] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.630] I> Copy BTCM section [0000.633] W> No valid slot number is found in scratch register [0000.638] W> Return default slot: _a [0000.642] I> A/B: bin_type (13) slot 0 [0000.645] I> Loading partition cpu-bootloader at 0x96000000 [0000.651] I> Reading two headers - addr:0x96000000 blocks:1 [0000.656] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.677] I> Binary(13) of size 284816 is loaded @ 0x96000000 [0000.683] W> No valid slot number is found in scratch register [0000.688] W> Return default slot: _a [0000.692] I> A/B: bin_type (20) slot 0 [0000.695] I> Loading partition bootloader-dtb at 0x8520f400 [0000.701] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.706] I> Addr: 0x8520f400, start-block: 29382664, num_blocks: 1 [0000.728] I> Binary(20) of size 363440 is loaded @ 0x8520f400 [0000.734] W> No valid slot number is found in scratch register [0000.739] W> Return default slot: _a [0000.743] I> A/B: bin_type (14) slot 0 [0000.746] I> Loading partition secure-os at 0x8530f600 [0000.752] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.757] I> Addr: 0x8530f600, start-block: 29384712, num_blocks: 1 [0000.779] I> Binary(14) of size 366000 is loaded @ 0x8530f600 [0000.786] I> TOS boot-params @ 0x85000000 [0000.790] I> TOS params prepared [0000.793] I> Loading EKS ... [0000.796] I> A/B: bin_type (15) slot 0 [0000.800] I> Loading partition eks at 0x8590f800 [0000.804] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.810] I> Addr: 0x8590f800, start-block: 29397000, num_blocks: 1 [0000.828] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.834] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.839] I> Copied encrypted keys [0000.842] I> boot profiler @ 0x175844000 [0000.846] I> boot profiler for TOS @ 0x175844000 [0000.851] I> Unhalting SCE [0000.854] I> Primary Memory Start:80000000 Size:70000000 [0000.859] I> Extended Memory Start:f0110000 Size:856f0000 [0000.866] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:44, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.172] I> Welcome to Cboot [0001.175] I> Cboot Version: t186-02737b3e [0001.179] I> CPU-BL Params @ 0x175800000 [0001.183] I> 0) Base:0x00000000 Size:0x00000000 [0001.187] I> 1) Base:0x177f00000 Size:0x00100000 [0001.192] I> 2) Base:0x177e00000 Size:0x00100000 [0001.196] I> 3) Base:0x177d00000 Size:0x00100000 [0001.201] I> 4) Base:0x177c00000 Size:0x00100000 [0001.205] I> 5) Base:0x177b00000 Size:0x00100000 [0001.210] I> 6) Base:0x177800000 Size:0x00200000 [0001.214] I> 7) Base:0x177400000 Size:0x00400000 [0001.219] I> 8) Base:0x177a00000 Size:0x00100000 [0001.223] I> 9) Base:0x177300000 Size:0x00100000 [0001.228] I> 10) Base:0x176800000 Size:0x00800000 [0001.232] I> 11) Base:0x30000000 Size:0x00040000 [0001.237] I> 12) Base:0xf0000000 Size:0x00100000 [0001.241] I> 13) Base:0x30040000 Size:0x00001000 [0001.246] I> 14) Base:0x30048000 Size:0x00001000 [0001.250] I> 15) Base:0x30049000 Size:0x00001000 [0001.255] I> 16) Base:0x3004a000 Size:0x00001000 [0001.259] I> 17) Base:0x3004b000 Size:0x00001000 [0001.263] I> 18) Base:0x3004c000 Size:0x00001000 [0001.268] I> 19) Base:0x3004d000 Size:0x00001000 [0001.272] I> 20) Base:0x3004e000 Size:0x00001000 [0001.277] I> 21) Base:0x3004f000 Size:0x00001000 [0001.281] I> 22) Base:0x00000000 Size:0x00000000 [0001.286] I> 23) Base:0xf0100000 Size:0x00010000 [0001.290] I> 24) Base:0x00000000 Size:0x00000000 [0001.295] I> 25) Base:0x00000000 Size:0x00000000 [0001.299] I> 26) Base:0x00000000 Size:0x00000000 [0001.303] I> 27) Base:0x00000000 Size:0x00000000 [0001.308] I> 28) Base:0x84400000 Size:0x00400000 [0001.312] I> 29) Base:0x30000000 Size:0x00010000 [0001.317] I> 30) Base:0x178000000 Size:0x08000000 [0001.321] I> 31) Base:0x00000000 Size:0x00000000 [0001.326] I> 32) Base:0x176000000 Size:0x00600000 [0001.330] I> 33) Base:0x80000000 Size:0x70000000 [0001.335] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.339] I> 35) Base:0x00000000 Size:0x00000000 [0001.344] I> 36) Base:0x00000000 Size:0x00000000 [0001.348] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.352] I> 38) Base:0x84000000 Size:0x00400000 [0001.357] I> 39) Base:0x96000000 Size:0x02000000 [0001.361] I> 40) Base:0x85000000 Size:0x01200000 [0001.366] I> 41) Base:0x175800000 Size:0x00500000 [0001.370] I> 42) Base:0x00000000 Size:0x00000000 [0001.375] I> 43) Base:0x00000000 Size:0x00000000 [0001.379] GIC-SPI Target CPU: 4 [0001.383] Interrupts Init done [0001.386] calling constructors [0001.389] initializing heap [0001.392] initializing threads [0001.395] initializing timers [0001.398] creating bootstrap completion thread [0001.403] top of bootstrap2() [0001.406] CPU: ARM Cortex A57 [0001.409] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.414] initializing platform [0001.418] I> Bl_dtb @0x8520f400 [0001.421] I> gpio framework initialized [0001.442] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.468] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.476] I> GPIO framework and drivers are initialized. [0001.481] I> Boot-device: eMMC [0001.488] I> sdmmc bdev is already initialized [0001.519] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.537] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.542] W> opt-in fuse is not set, skip fuse_burning [0001.547] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.553] W> No valid slot number is found in scratch register [0001.559] W> Return default slot: _a [0001.562] I> A/B: bin_type (21) slot 0 [0001.566] I> Loading kernel-dtb from partition [0001.570] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.588] I> Kernel_dtb @0x80000000 [0001.591] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.627] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.666] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.674] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.680] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.716] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.754] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.762] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.789] I> fixed regulator driver initialized [0001.979] I> register 'maxim' power off handle [0001.995] I> virtual i2c enabled [0001.998] I> registered 'maxim,max77620' pmic [0002.004] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0002.053] I> Find /i2c@c250000's alias i2c7 [0002.057] I> Reading eeprom i2c=7 address=0x50 [0002.064] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0002.071] E> I2C: Failed to clear bus for instance 7. [0002.077] E> I2C: Failed to clear bus for instance 7. [0002.082] E> I2C_DEV: Failed to initialize instance 7. [0002.087] E> eeprom: Can't get handle to eeprom device @160 [0002.092] I> Eeprom read failed 0x3536002a [0002.096] I> Reading eeprom i2c=7 address=0x57 [0002.103] E> I2C: Timeout while polling for bus clear. Last value 0x00000000. [0002.110] E> I2C: Failed to clear bus for instance 7. [0002.116] E> I2C: Failed to clear bus for instance 7. [0002.121] E> I2C_DEV: Failed to initialize instance 7. [0002.126] E> eeprom: Can't get handle to eeprom device @174 [0002.131] I> Eeprom read failed 0x3536002a [0002.139] I> Find /i2c@c240000's alias i2c1 [0002.143] I> Reading eeprom i2c=1 address=0x51 [0002.149] E> I2C: slave not found in slaves. [0002.153] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.161] E> I2C_DEV: Failed to send register address 0x00000000. [0002.167] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.176] E> eeprom: Retry to read I2C slave device. [0002.181] E> I2C: slave not found in slaves. [0002.185] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.193] E> I2C_DEV: Failed to send register address 0x00000000. [0002.199] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.209] E> eeprom: Failed to read I2C slave device [0002.213] I> Eeprom read failed 0x3526070d [0002.221] I> Find /i2c@3160000's alias i2c0 [0002.225] I> Reading eeprom i2c=0 address=0x50 [0002.230] E> I2C: slave not found in slaves. [0002.235] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.243] E> I2C_DEV: Failed to send register address 0x00000000. [0002.248] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.258] E> eeprom: Failed to read I2C slave device [0002.263] I> Eeprom read failed 0x3526070d [0002.272] I> Find /i2c@3180000's alias i2c2 [0002.276] I> Reading eeprom i2c=2 address=0x54 [0002.280] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.285] C> GPIO driver for chip_id 0x2 could not be found [0002.290] E> cam_eeprom_read: Can't get gpio driver [0002.295] I> Eeprom read failed 0x4d4d000d [0002.299] I> Reading eeprom i2c=2 address=0x57 [0002.303] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.308] C> GPIO driver for chip_id 0x2 could not be found [0002.314] E> cam_eeprom_read: Can't get gpio driver [0002.318] I> Eeprom read failed 0x4d4d000d [0002.474] I> regulator 'vdd-hdmi' already enabled [0002.550] I> regulator 'vdd-hdmi' already enabled [0002.555] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.561] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.584] E> cannot find any other nvdisp nodes [0002.588] E> no valid display unit config found in dtb [0002.594] W> display init failed [0002.597] initializing target [0002.601] calling apps_init() [0002.604] starting app kernel_boot_app [0002.626] I> found decompressor handler: lz4-legacy [0002.631] I> decompressing BMP blob ... [0002.675] I> Kernel type = Normal [0002.678] I> Loading kernel-bootctrl from partition [0002.683] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.697] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.704] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.711] I> ########## Fixed storage boot ########## [0002.716] W> No valid slot number is found in scratch register [0002.722] W> Return default slot: _a [0002.725] I> A/B: bin_type (24) slot 0 [0002.741] I> Boot image size read from image header: 746bc [0002.746] I> Boot image load address: 0x80400000 [0002.751] I> Loading kernel from partition [0002.755] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.760] I> Validate kernel ... [0003.763] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.772] I> kernel-dtb is already loaded [0003.776] I> Validate kernel-dtb ... [0003.779] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.788] I> Checking boot.img header magic ... [0003.792] I> [OK] [0003.794] I> Kernel hdr @0x80400000 [0003.797] I> Kernel dtb @0x80000000 [0003.800] I> decompressor handler not found [0003.804] I> Copying kernel image (476860 bytes) from 0x80400800 to 0x80600000 ... [0003.813] I> Done [0003.815] I> Move ramdisk (len: 0) from 0x80475000 to 0x947b0000 [0003.831] I> Updated bpmp info to DTB [0003.849] I> Ramdisk: Base: 0x947b0000; Size: 0x0 [0003.853] I> Updated initrd info to DTB [0003.857] W> WARN: Fail to override "console=none" in commandline [0003.863] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.870] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.877] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.885] I> disabled_core_mask: 0xffffff0c [0003.889] W> No valid slot number is found in scratch register [0003.894] W> Return default slot: _a [0003.898] I> Active slot suffix: [0003.901] I> add_boot_slot_suffix: slot_suffix = [0003.905] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 ignore_loglevel fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.953] I> Updated bootarg info to DTB [0003.956] E> Error 892665857: Failed to get CVM EEPROM contents [0003.962] E> Booting w/o MAC ddresses for WIFI, Bluetooth & Ethernet [0003.968] E> Failed to get WIFI MAC address [0003.972] E> Error 892665857: Failed to get CVM EEPROM contents [0003.978] E> Booting w/o MAC ddresses for WIFI, Bluetooth & Ethernet [0003.984] E> Failed to get Bluetooth MAC address [0003.989] E> Error 892665857: Failed to get CVM EEPROM contents [0003.994] E> Booting w/o MAC ddresses for WIFI, Bluetooth & Ethernet [0004.001] E> Failed to get Ethernet MAC address [0004.005] E> Found no plugin manager ids in source DT [0004.010] W> Add plugin manager ids from board info [0004.014] W> "plugin-manager" doesn't exist, creating [0004.019] W> "ids" doesn't exist, creating [0004.024] W> "connection" doesn't exist, creating [0004.030] W> "configs" doesn't exist, creating [0004.057] W> "chip-id" doesn't exist, creating [0004.062] I> Adding plugin-manager/chip-id/A02P [0004.067] W> "odm-data" doesn't exist, creating [0004.073] I> Adding /chosen/plugin-manager/odm-data [0004.110] I> added [base:0x80000000, size:0x70000000] to /memory [0004.116] I> added [base:0xf0200000, size:0x85600000] to /memory [0004.122] I> added [base:0x175e00000, size:0x200000] to /memory [0004.127] I> added [base:0x176600000, size:0x200000] to /memory [0004.133] I> added [base:0x177000000, size:0x200000] to /memory [0004.139] I> Updated memory info to DTB [0004.149] E> add_disp_param: failed to get display params for du=0 [0004.166] W> "reset" doesn't exist, creating [0004.170] W> "pmc-reset-reason" doesn't exist, creating [0004.179] W> "pmic-reset-reason" doesn't exist, creating [0004.192] I> Adding ecid(00000001645ca442080000000f020040) to DT [0004.198] I> disabled_core_mask: 0xffffff0c [0004.259] E> Error 892665857: Failed to read CVM EEPROM [0004.264] E> Failed to get serial number [0004.268] I> Plugin-manager override starting [0004.282] I> node /plugin-manager/fragement@0 matches [0004.321] I> node /plugin-manager/fragement@4 matches [0004.683] I> Disable plugin-manager status in FDT [0004.688] I> Plugin-manager override finished successfully [0004.693] I> tegrabl_load_kernel_and_dtb: Done [0004.697] E> tegrabl_display_clear: display is not initialized [0004.703] W> Boot logo display failed... [0004.707] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2016.07-dirty (Aug 07 2020 - 14:52:27 +0200) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 3.8 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Can't find nvidia,ether-mac property in cboot DTB Net: Error: ethernet@2490000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 873 bytes read in 146 ms (4.9 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 5565615 bytes read in 262 ms (20.3 MiB/s) Retrieving file: /boot/Image 34723848 bytes read in 894 ms (37 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 ignore_loglevel fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 ignore_loglevel fbcon=map:0 net.ifnames=0 isolcpus=1-2 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 000000008005db48 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@ubuntu) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #1 SMP PREEMPT Fri Aug 7 15:25:06 CEST 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1006592 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0f676a000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 990776 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 ignore_loglevel fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 ignore_loglevel fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29152(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3845940K/4026368K available (15294K kernel code, 2934K rwdata, 7052K rodata, 8576K init, 609K bss, 114892K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009660000 ( 7104 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ec0000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009ec0000 - 0xffffff800a19d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a19d808 - 0xffffff800a235f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000017] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.017940] Console: colour dummy device 80x25 [ 0.022688] console [tty0] enabled [ 0.026334] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@ubuntu) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #1 SMP PREEMPT Fri Aug 7 15:25:06 CEST 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 1006592 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523776 pages, LIFO batch:31 [ 0.000000] Normal zone: 7624 pages used for memmap [ 0.000000] Normal zone: 482816 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0f676a000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 990776 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 ignore_loglevel fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 ignore_loglevel fbcon=map:0 net.ifnames=0 isolcpus=1-2 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29152(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3845940K/4026368K available (15294K kernel code, 2934K rwdata, 7052K rodata, 8576K init, 609K bss, 114892K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009660000 ( 7104 KB) [ 0.000000] .init : 0xffffff8009660000 - 0xffffff8009ec0000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009ec0000 - 0xffffff800a19d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a19d808 - 0xffffff800a235f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000017] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.017940] Console: colour dummy device 80x25 [ 0.022688] console [tty0] enabled [ 0.026334] bootconsole [uart8250] disabled [ 0.030800] kmemleak: Kernel memory leak detector disabled [ 0.030888] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.030980] pid_max: default: 32768 minimum: 301 [ 0.033002] Security Framework initialized [ 0.034025] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.034091] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.037407] ftrace: allocating 47104 entries in 185 pages [ 0.797662] sched-energy: Sched-energy-costs installed from DT [ 0.797757] ASID allocator initialised with 65536 entries [ 0.865339] tegra-id: chipid=21817. [ 0.865412] tegra-id: opt_subrevision=1. [ 0.865494] Tegra Revision: A02p SKU: 0x94 CPU Process: 0 SoC Process: 0 [ 0.865572] DTS File Name: /home/altaneos/nvidia/nvidia_sdk_4gb/JetPack_4.4_Linux_JETSON_TX2_4GB/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-tegra-lys-cam-a00-00-base.dts [ 0.865687] DTB Build time: [ 0.920488] CPU1: Booted secondary processor [4e0f0030] [ 0.955957] CPU2: Booted secondary processor [4e0f0030] [ 0.990403] CPU3: Booted secondary processor [411fd073] [ 1.022355] CPU4: Booted secondary processor [411fd073] [ 1.054336] CPU5: Booted secondary processor [411fd073] [ 1.054652] Brought up 6 CPUs [ 1.054914] SMP: Total of 6 processors activated. [ 1.054990] CPU features: detected feature: 32-bit EL0 Support [ 1.059646] CPU: All CPU(s) started at EL2 [ 1.060004] alternatives: patching kernel code [ 1.074475] devtmpfs: initialized [ 1.211985] random: fast init done [ 1.314132] Initilizing CustomIPI irq domain [ 1.315273] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.315424] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.320863] pinctrl core: initialized pinctrl subsystem [ 1.321771] OS set in device tree is not L4T. [ 1.322719] regulator-dummy: no parameters [ 1.323603] Initializing plugin-manager [ 1.323947] Plugin module not found [ 1.324225] Plugin-manager status disabled [ 1.331920] NET: Registered protocol family 16 [ 1.336265] persistent_ram: found existing invalid buffer, size 524288, start 1048576 [ 1.336509] persistent_ram: found existing invalid buffer, size 524288, start 0 [ 1.336623] persistent_ram: found existing invalid buffer, size 0, start 33816580 [ 1.336835] persistent_ram: found existing invalid buffer, size 2, start 10485888 [ 1.337071] pstore: using zlib compression [ 1.339532] console [pstore-1] enabled [ 1.339604] pstore: Registered ramoops as persistent store backend [ 1.339685] ramoops: attached 0x200000@0x175880000, ecc: 0/0 [ 1.362491] cpuidle: using governor menu [ 1.369391] bpmp: waiting for handshake [ 1.369486] bpmp: handshake completed [ 1.369576] bpmp: synchronizing channels [ 1.369650] bpmp: channels synchronized [ 1.369718] bpmp: mail init ok [ 1.382208] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.382320] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.382457] arm-smmu 12000000.iommu: stage 1 translation [ 1.382538] arm-smmu 12000000.iommu: stage 2 translation [ 1.382613] arm-smmu 12000000.iommu: nested translation [ 1.382696] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 1.382810] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 1.382930] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.383018] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 1.383100] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 1.394599] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009ec4000) [ 1.394760] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 1.401171] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 1.411092] Registering BPMP clocks... [ 1.411369] tegra_bpmp_clk_init: clock init ok (638 clks) [ 1.415688] Serial: AMBA PL011 UART driver [ 1.417690] tegra_powergate_init: DONE [ 1.417798] DTS File Name: /home/altaneos/nvidia/nvidia_sdk_4gb/JetPack_4.4_Linux_JETSON_TX2_4GB/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-tegra-lys-cam-a00-00-base.dts [ 1.418001] DTB Build time: [ 1.427044] Tegra reboot handler registered. [ 1.435778] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.436262] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 1.436380] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 1.436458] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 1.436530] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.437458] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 1.437625] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 1.439736] iommu: Adding device 3460000.sdhci to group 0 [ 1.442362] iommu: Adding device 3440000.sdhci to group 1 [ 1.445100] iommu: Adding device 3400000.sdhci to group 2 [ 1.451321] iommu: Adding device 3507000.ahci-sata to group 3 [ 1.451457] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 1.453955] iommu: Adding device 3160000.i2c to group 4 [ 1.456619] iommu: Adding device c240000.i2c to group 5 [ 1.458994] iommu: Adding device 3180000.i2c to group 6 [ 1.461214] iommu: Adding device 3190000.i2c to group 7 [ 1.463983] iommu: Adding device 31b0000.i2c to group 8 [ 1.466187] iommu: Adding device 31c0000.i2c to group 9 [ 1.468487] iommu: Adding device c250000.i2c to group 10 [ 1.470767] iommu: Adding device 31e0000.i2c to group 11 [ 1.480370] iommu: Adding device 3210000.spi to group 12 [ 1.482735] iommu: Adding device c260000.spi to group 13 [ 1.484928] iommu: Adding device 3240000.spi to group 14 [ 1.489339] iommu: Adding device 3100000.serial to group 15 [ 1.491710] iommu: Adding device 3110000.serial to group 16 [ 1.493908] iommu: Adding device c280000.serial to group 17 [ 1.496166] iommu: Adding device 3130000.serial to group 18 [ 1.505074] iommu: Adding device 2490000.ether_qos to group 19 [ 1.505206] arm-smmu: forcing sodev map for 2490000.ether_qos [ 1.509391] iommu: Adding device b000000.rtcpu to group 20 [ 1.523847] iommu: Adding device 13e10000.host1x to group 21 [ 1.525648] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 1.527534] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 1.529274] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 1.531104] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 1.532854] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 1.534699] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 1.536441] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 1.538181] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 1.541030] iommu: Adding device 150c0000.nvcsi to group 30 [ 1.544961] iommu: Adding device 15700000.vi to group 31 [ 1.547360] iommu: Adding device 15600000.isp to group 32 [ 1.550267] iommu: Adding device 15210000.nvdisplay to group 33 [ 1.554226] iommu: Adding device 15340000.vic to group 34 [ 1.555771] iommu: Adding device 154c0000.nvenc to group 35 [ 1.557251] iommu: Adding device 15480000.nvdec to group 36 [ 1.559586] iommu: Adding device 15380000.nvjpg to group 37 [ 1.561024] iommu: Adding device 15500000.tsec to group 38 [ 1.562553] iommu: Adding device 15100000.tsecb to group 39 [ 1.566920] iommu: Adding device 15810000.se to group 40 [ 1.568368] iommu: Adding device 15820000.se to group 41 [ 1.569814] iommu: Adding device 15830000.se to group 42 [ 1.571402] iommu: Adding device 15840000.se to group 43 [ 1.577109] iommu: Adding device smmu_test to group 44 [ 1.580717] mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c10000 [ 1.580863] mc: mapped MMIO address: 0xffffff800a730000 -> 0x2c20000 [ 1.580990] mc: mapped MMIO address: 0xffffff800a750000 -> 0x2c30000 [ 1.581112] mc: mapped MMIO address: 0xffffff800a770000 -> 0x2c40000 [ 1.581244] mc: mapped MMIO address: 0xffffff800a790000 -> 0x2c50000 [ 1.581341] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 1.581446] mc-err: mcerr ops are set to t18x [ 1.582212] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 1.589247] iommu: Adding device 3530000.xhci to group 45 [ 1.589376] arm-smmu: forcing sodev map for 3530000.xhci [ 1.592058] iommu: Adding device 3550000.xudc to group 46 [ 1.592183] arm-smmu: forcing sodev map for 3550000.xudc [ 1.596493] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 1.596603] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 1.600303] iommu: Adding device 17000000.gp10b to group 47 [ 1.606589] tegra-reset 5000000.clock: registered 193 resets. [ 1.621051] iommu: Adding device d000000.bpmp to group 48 [ 1.622092] bpmp: ping status is 0 [ 1.622487] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 1.629558] bpmp d000000.bpmp: probe ok [ 1.649708] iommu: Adding device 2600000.dma to group 49 [ 1.655607] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 1.655786] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 1.656712] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 1.677593] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 1.686656] iommu: Adding device 10003000.pcie-controller to group 50 [ 1.686799] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 1.688568] iommu: Adding device sound to group 51 [ 1.690891] iommu: Adding device 3510000.hda to group 52 [ 1.727293] iommu: Adding device c1a0000.aon to group 53 [ 1.729770] vdd-ac-bat: 5000 mV [ 1.740681] vdd-1v8-ap: 1800 mV [ 1.816494] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.831354] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.832678] SCSI subsystem initialized [ 1.833433] libata version 3.00 loaded. [ 1.834511] usbcore: registered new interface driver usbfs [ 1.834815] usbcore: registered new interface driver hub [ 1.835320] usbcore: registered new device driver usb [ 1.878765] max77620 4-003c: PMIC Version OTP:0x4D and ES:0x1 [ 1.890682] vddio-ddr: at 1125 mV [ 1.898462] avdd_dsi_csi: 1200 mV [ 1.902424] vdd-1v8: 1800 mV [ 1.910406] vdd-3v3-sys: 3300 mV [ 1.911902] max77620-sd4: at 600 mV [ 1.913947] spmic-ldo0: at 1800 mV [ 1.915763] spmic-ldo1: at 800 mV [ 1.922401] vddio-3v3: 3300 mV [ 1.924107] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 1.930407] vdd-rtc: at 800 mV [ 1.932390] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 1.938405] spmic-ldo6: at 1500 mV [ 1.942418] vdd-pex-1v00: 1000 mV [ 1.944390] dvdd-pex: 1000 mV [ 1.949676] GPIO line 253 (spmic_gpio_input) hogged as input [ 1.949985] GPIO line 254 (spmic_gpio_input) hogged as input [ 1.951023] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 1.952207] max77620 4-003c: max77620 probe successful [ 1.954194] media: Linux media interface: v0.10 [ 1.954534] Linux video capture interface: v2.00 [ 1.962305] pps_core: LinuxPPS API ver. 1 registered [ 1.962500] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.962711] PTP clock support registered [ 1.963918] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 1.965024] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 1.965190] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 1.972850] trusty trusty: trusty version: Built: 21:16:26 Jun 25 2020 [ 1.973022] trusty trusty: selected api version: 3 (requested 3) [ 1.978133] Advanced Linux Sound Architecture Driver Initialized. [ 1.980035] Bluetooth: Core ver 2.22 [ 1.980245] NET: Registered protocol family 31 [ 1.980330] Bluetooth: HCI device and connection manager initialized [ 1.980429] Bluetooth: HCI socket layer initialized [ 1.980513] Bluetooth: L2CAP socket layer initialized [ 1.980644] Bluetooth: SCO socket layer initialized [ 1.984225] en-vdd-sd: 3300 mV [ 1.985577] en-vdd-cam: 1800 mV [ 1.986977] vdd-hdmi: 5000 mV [ 1.988791] vdd-usb0-5v: 5000 mV [ 1.990627] vdd-usb1-5v: 5000 mV [ 1.992125] en-vdd-ts-1v8: 1800 mV [ 1.993569] en-vdd-ts-hv-3v3: 3300 mV [ 1.995147] en-vdd-disp-3v3: 3300 mV [ 1.996646] en-mdm-pwr-3v7: 3700 mV [ 1.998165] en-vdd-disp-1v8: 1800 mV [ 1.999876] en-vdd-cam-hv-2v8: 2800 mV [ 2.001444] en-vdd-cam-1v2: 1200 mV [ 2.003426] vdd-fan: 5000 mV [ 2.005080] vdd-3v3: 3300 mV [ 2.006845] dis-vdd-1v2: 1200 mV [ 2.008525] en-vdd-vcm-2v8: 2800 mV [ 2.010278] vdd-usb2-5v: 5000 mV [ 2.012076] vdd-sys-bl: 3300 mV [ 2.013828] en-vdd-sys: 1200 mV [ 2.022324] camchar: rtcpu character device driver loaded [ 2.025016] gpio tegra-gpio wake53 for gpio=159(X:7) [ 2.027804] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 2.032805] clocksource: Switched to clocksource arch_sys_counter [ 2.165148] VFS: Disk quotas dquot_6.6.0 [ 2.165656] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.167023] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 2.169575] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 2.169692] nvmap_page_pool_init: Total RAM pages: 977869 [ 2.169773] nvmap_page_pool_init: nvmap page pool size: 122233 pages (477 MB) [ 2.170208] nvmap_background_zero_thread: PP zeroing thread starting. [ 2.185224] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 2.221112] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 2.222264] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 2.224676] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 2.225341] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 2.226092] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 2.226833] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 2.227861] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 2.228378] la/ptsa driver initialized. [ 2.228473] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 2.228550] pre_t19x_iso_plat_init(): max_iso_bw=23040000KB [ 2.230472] NET: Registered protocol family 2 [ 2.234311] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 2.235423] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 2.237519] TCP: Hash tables configured (established 32768 bind 32768) [ 2.237800] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 2.238250] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 2.240156] NET: Registered protocol family 1 [ 2.242403] RPC: Registered named UNIX socket transport module. [ 2.242499] RPC: Registered udp transport module. [ 2.242570] RPC: Registered tcp transport module. [ 2.242638] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.242722] PCI: CLS 0 bytes, default 64 [ 2.243386] Trying to unpack rootfs image as initramfs... [ 3.318316] Freeing initrd memory: 5432K [ 3.389306] host1x 13e10000.host1x: initialized [ 3.396304] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 3.409191] audit: initializing netlink subsys (disabled) [ 3.409426] audit: type=2000 audit(2.720:1): initialized [ 3.412004] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 3.453363] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.459566] ntfs: driver 2.1.32 [Flags: R/W]. [ 3.462897] 9p: Installing v9fs 9p2000 file system support [ 3.476076] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 3.476676] io scheduler noop registered [ 3.478098] io scheduler cfq registered (default) [ 3.490743] gic 2a41000.agic-controller: GIC IRQ controller registered [ 3.660298] iommu: Adding device aconnect@2a41000:adsp_audio to group 54 [ 3.716068] iommu: Adding device 2993000.adsp to group 55 [ 3.717818] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 3.728690] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 3.739717] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 3.742762] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 3.745670] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 3.748487] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 3.758713] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 3.762075] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 3.763069] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 3.765592] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 3.767334] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 3.769030] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 3.769171] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500 [ 3.782007] tsec 15500000.tsec: initialized [ 3.784972] tsec 15100000.tsecb: initialized [ 3.798079] nvdec 15480000.nvdec: initialized [ 3.824161] falcon 15340000.vic: initialized [ 3.827968] falcon 154c0000.nvenc: initialized [ 3.831340] falcon 15380000.nvjpg: initialized [ 3.842239] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 3.850359] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 3.858501] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 3.866618] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 3.875094] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 3.883158] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 3.891263] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 3.899291] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 3.918525] tegradccommon 15200000.dc_common: host1x channel mapped [ 3.918658] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 3.918850] tegradccommon 15200000.dc_common: dma mapping done [ 3.919580] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=390 [ 3.920486] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 3.921264] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 3.921419] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 3.921756] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 3.922145] generic_infoframe_type: 0x87 [ 3.922303] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 3.922395] tegra_cec 3960000.tegra_cec: probed [ 3.922749] tegradc 15210000.nvdisplay: DT parsed successfully [ 3.922943] tegradc 15210000.nvdisplay: Display dc.ffffff800abe0000 registered with id=0 [ 3.946036] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 3.946169] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 3.946281] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 3.946814] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 3.946926] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 3.973832] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 3.973973] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 3.987986] tegradc 15210000.nvdisplay: probed [ 3.991056] Console: switching to colour frame buffer device 80x30 [ 3.991246] tegradc 15210000.nvdisplay: fb registered [ 3.992098] gpio tegra-gpio wake21 for gpio=121(P:1) [ 3.993346] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 3.993964] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 3.994586] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 3.994938] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.002783] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 4.003030] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 4.005174] Parent Clock set for DC plld2 [ 4.006765] kfuse 3830000.kfuse: initialized [ 4.011715] edid invalid [ 4.013830] tegradc 15210000.nvdisplay: hdmi: tmds rate:25200K prod-setting:prod_c_hdmi_0m_54m [ 4.015999] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 4.016118] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 4.016208] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 4.033945] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.043616] console [ttyS0] disabled [ 4.043855] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 4.054563] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 4.054577] Extcon AUX1(HDMI) enable [ 4.196495] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 4.607842] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 4.944163] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 5.009070] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 5.009090] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 5.018980] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 5.020853] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 5.429914] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 5.841059] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 6.252227] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 6.254307] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 6.456321] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 6.456821] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 6.587127] console [ttyS0] enabled [ 6.587219] tegradc 15210000.nvdisplay: blank - powerdown [ 6.593285] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 6.596427] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 6.597500] serial-tegra 3130000.serial: RX in PIO mode [ 6.599808] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 6.606038] [drm] Initialized [ 6.620935] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.620948] Extcon AUX1(HDMI) disable [ 6.648555] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 6.649189] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.650940] brd: module loaded [ 6.654122] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.699658] loop: module loaded [ 6.700738] tegra_profiler: version: 1.141, samples/io: 48/28 [ 6.701987] tegra_profiler: auth: init [ 6.711781] nct1008_nct72 7-004c: starting parse dt [ 6.713456] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 6.713488] nct1008_nct72 7-004c: success parsing dt [ 6.715778] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 6.722994] THERMAL EST: found 3 subdevs [ 6.723050] THERMAL EST num_resources: 0 [ 6.723096] [THERMAL EST subdev 0] [ 6.723161] [THERMAL EST subdev 1] [ 6.723212] [THERMAL EST subdev 2] [ 6.727518] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 6.727539] THERMAL EST: thz register success. [ 6.729116] THERMAL EST: end of probe, return err: 0 [ 6.740515] sd: No Scsi addr parsed to reserve index [ 6.740712] hisi_sas: driver version v1.6 [ 6.771175] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 6.771239] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 6.779026] scsi host0: tegra_ahci [ 6.782639] scsi host1: tegra_ahci [ 6.783902] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 6.783925] ata2: DUMMY [ 6.835206] libphy: Fixed MDIO Bus: probed [ 6.839986] tun: Universal TUN/TAP device driver, 1.6 [ 6.840004] tun: (C) 1999-2004 Max Krasnyansky [ 6.849332] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 6.849350] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 6.849647] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 6.849666] igb: Copyright (c) 2007-2014 Intel Corporation. [ 6.849928] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 6.849941] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 6.850197] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 6.850216] Copyright(c) 1999 - 2017 Intel Corporation. [ 6.873910] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 6.896549] eqos_get_mac_address_dtb: bad mac address at /chosen/nvidia,ether-mac: null. [ 6.896617] eqos 2490000.ether_qos (unnamed net_device) (uninitialized): ether-mac read from DT failed -99 [ 6.896684] eqos 2490000.ether_qos (unnamed net_device) (uninitialized): EQOS using random MAC address: d2:8a:7c:57:5e:b5 [ 6.897958] libphy: dwc_phy: probed [ 6.900699] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 6.920899] PPP generic driver version 2.4.2 [ 6.922354] PPP BSD Compression module registered [ 6.922383] PPP Deflate Compression module registered [ 6.922660] PPP MPPE Compression module registered [ 6.922695] NET: Registered protocol family 24 [ 6.923117] usbcore: registered new interface driver r8152 [ 6.923387] usbcore: registered new interface driver asix [ 6.923678] usbcore: registered new interface driver ax88179_178a [ 6.923949] usbcore: registered new interface driver cdc_ether [ 6.924499] usbcore: registered new interface driver net1080 [ 6.924737] usbcore: registered new interface driver cdc_subset [ 6.925234] usbcore: registered new interface driver zaurus [ 6.925507] usbcore: registered new interface driver cdc_ncm [ 6.926597] VFIO - User Level meta-driver version: 0.3 [ 6.935182] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.935338] ehci-pci: EHCI PCI platform driver [ 6.935639] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.935701] ohci-pci: OHCI PCI platform driver [ 6.935945] ohci-platform: OHCI generic platform driver [ 6.964090] tegradc 15210000.nvdisplay: unblank [ 6.970650] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.971407] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.972212] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 6.987623] Parent Clock set for DC plld2 [ 6.997834] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.999456] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 7.001417] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 7.001455] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 7.002518] tegra-xusb 3530000.xhci: extcon 0: ffffffc0ef446c00 id [ 7.005778] usbcore: registered new interface driver uas [ 7.005888] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release [ 7.006541] usbcore: registered new interface driver usb-storage [ 7.007072] usbcore: registered new interface driver usbserial [ 7.031410] tegra-xudc-new 3550000.xudc: device count: 1 [ 7.032971] tegra-xusb 3530000.xhci: xHCI Host Controller [ 7.033051] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 7.034053] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 7.034200] tegra-xusb 3530000.xhci: irq 70, io mem 0x03530000 [ 7.034865] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.034891] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.034910] usb usb1: Product: xHCI Host Controller [ 7.034928] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 7.034944] usb usb1: SerialNumber: 3530000.xhci [ 7.035575] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 7.036941] hub 1-0:1.0: USB hub found [ 7.037106] hub 1-0:1.0: 4 ports detected [ 7.038723] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.038737] Extcon AUX1(HDMI) enable [ 7.038870] tegra-xusb 3530000.xhci: xHCI Host Controller [ 7.038917] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 7.039547] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 7.039573] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.039592] usb usb2: Product: xHCI Host Controller [ 7.039609] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 7.039625] usb usb2: SerialNumber: 3530000.xhci [ 7.041399] hub 2-0:1.0: USB hub found [ 7.041518] hub 2-0:1.0: 3 ports detected [ 7.100528] ata1: SATA link down (SStatus 0 SControl 300) [ 7.125346] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 7.125363] tegra-usb-cd usb_cd: connected to SDP [ 7.125403] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 7.125742] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 7.128250] mousedev: PS/2 mouse device common for all mice [ 7.128526] usbcore: registered new interface driver xpad [ 7.141352] usb usb1: usb_suspend_both: status 0 [ 7.265752] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 7.268670] Wake73 for irq=42 [ 7.270689] rtc rtc1: alarm rtc device [ 7.270742] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 7.270812] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 7.271708] i2c /dev entries driver [ 7.283915] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 7.308148] parse_throttle_dt_data: Num cap clks = 4 [ 7.308166] parse_throttle_dt_data: clk=mcpu type=1 [ 7.308180] parse_throttle_dt_data: clk=bcpu type=2 [ 7.308206] parse_throttle_dt_data: clk=gpu type=4 [ 7.308218] parse_throttle_dt_data: clk=emc type=3 [ 7.310854] tegra_throttle_probe: probe successful. #cdevs=4 [ 7.314040] FAN dev name: pwm-fan [ 7.314327] FAN:gpio request success. [ 7.314370] FAN: can't find tach_gpio [ 7.314487] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 7.315535] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 7.315559] pwm_fan_driver pwm-fan: tach period: 1000 [ 7.316951] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 7.316974] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 7.316995] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 7.317014] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 7.317033] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 7.317053] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 7.317072] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 7.317092] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 7.317112] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 7.317132] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 7.322769] device-mapper: uevent: version 1.0.3 [ 7.324652] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 7.326073] CPU EMC frequency mapping table: default setting [ 7.332265] cpufreq: platform driver Initialization: pass [ 7.335099] cpuidle: Initializing cpuidle driver init for Denver cluster [ 7.335788] cpuidle: Initializing cpuidle driver init for A57 cluster [ 7.340120] sdhci: Secure Digital Host Controller Interface driver [ 7.340126] sdhci: Copyright(c) Pierre Ossman [ 7.340132] sdhci-pltfm: SDHCI platform and OF driver helper [ 7.344041] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 7.346359] CMDQ: cmdq_platfm_init successful [ 7.348597] CQE: CMD_TIMING bit set for R1B DCMD [ 7.350936] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 7.357242] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 7.357462] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 7.359628] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 7.361826] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257 [ 7.372272] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 7.374869] tegra-se-nvhost 15810000.se: initialized [ 7.378780] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.380244] tegra-se-nvhost 15820000.se: initialized [ 7.384472] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.386089] tegra-se-nvhost 15830000.se: initialized [ 7.389444] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.390798] tegra-se-nvhost 15840000.se: initialized [ 7.392917] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 7.394870] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.395875] hidraw: raw HID events driver (C) Jiri Kosina [ 7.397411] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 7.401424] usbcore: registered new interface driver usbhid [ 7.401430] usbhid: USB HID core driver [ 7.409091] gpio tegra-gpio wake71 for gpio=125(P:5) [ 7.409239] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 7.409363] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 7.409442] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 7.409963] ina3221x: probe of 0-0042 failed with error -121 [ 7.411078] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 7.411147] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 7.411619] ina3221x: probe of 0-0043 failed with error -121 [ 7.425001] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 7.430573] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 7.431843] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 7.432492] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 7.433630] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 7.438027] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 7.438434] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 7.438724] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 7.439020] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 7.439587] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 7.441151] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51) [ 7.441163] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 7.442880] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 7.443144] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 7.449698] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 7.451737] tegra186-aondbg aondbg: aondbg driver probe() OK [ 7.452477] register_ari_mca_banks: Registered MCA ROC:IOB [ 7.452573] register_ari_mca_banks: Registered MCA ROC:CCE [ 7.453808] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.453821] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 7.453832] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 7.454126] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.454137] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 7.454146] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 7.454419] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.454430] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 7.454439] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 7.454711] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.454721] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 7.454730] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 7.455006] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.455016] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 7.455025] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 7.455292] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.455305] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 7.455313] tegra18-bridge 2100000.axip2p: bridge probed OK [ 7.455578] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.455591] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 7.455600] tegra18-bridge 2110000.axip2p: bridge probed OK [ 7.455898] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.455910] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 7.455919] tegra18-bridge 2120000.axip2p: bridge probed OK [ 7.456190] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.456203] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 7.456212] tegra18-bridge 2130000.axip2p: bridge probed OK [ 7.456474] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.456485] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 7.456494] tegra18-bridge 2140000.axip2p: bridge probed OK [ 7.456826] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.456840] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 7.456849] tegra18-bridge 2150000.axip2p: bridge probed OK [ 7.457142] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.457155] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 7.457165] tegra18-bridge 2160000.axip2p: bridge probed OK [ 7.457438] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.457452] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 7.457461] tegra18-bridge 2170000.axip2p: bridge probed OK [ 7.457722] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.457736] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 7.457744] tegra18-bridge 2180000.axip2p: bridge probed OK [ 7.458008] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 7.458020] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 7.458029] tegra18-bridge 2190000.axip2p: bridge probed OK [ 7.458325] **** A57 ECC: Enabled [ 7.458334] tegra18_a57_serr_init: on CPU 3 a A57 Core [ 7.458638] tegra18x_actmon d230000.actmon: in actmon_register()... [ 7.459828] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.462074] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 7.462763] denver_knobs_init:MTS_VERSION:47926945 [ 7.468411] mmc0: periodic cache flush enabled [ 7.468447] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.469907] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.470526] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 7.471073] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 7.472864] nvpmodel: initialized successfully [ 7.473130] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 7.477073] trusty-virtio trusty:virtio: initializing [ 7.477599] trusty_ipc virtio0: vring0: va(pa) ffffffc0eb396000(0) qsz 32 notifyid 1 [ 7.477632] trusty_ipc virtio0: vring1: va(pa) ffffffc0eb3a4000(0) qsz 32 notifyid 2 [ 7.477962] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 7.477971] trusty-virtio trusty:virtio: initializing done [ 7.478461] trusty_ipc virtio0: is online [ 7.485379] usbcore: registered new interface driver snd-usb-audio [ 7.506708] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 7.507533] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 7.693590] OPE platform probe [ 7.693945] OPE platform probe successful [ 7.946069] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 7.946465] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 7.946865] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 7.947246] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 7.947632] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 7.948017] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 7.948387] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 7.948836] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 7.949260] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 7.949638] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 7.950028] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 7.950413] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 7.950788] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 7.951176] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 7.951544] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 7.952130] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 7.952525] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 7.952965] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 7.953360] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 7.953739] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 8.057682] u32 classifier [ 8.057687] Actions configured [ 8.057982] Initializing XFRM netlink socket [ 8.061475] NET: Registered protocol family 10 [ 8.064577] NET: Registered protocol family 17 [ 8.064618] NET: Registered protocol family 15 [ 8.065033] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 8.065259] Bluetooth: RFCOMM socket layer initialized [ 8.065289] Bluetooth: RFCOMM ver 1.11 [ 8.065308] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 8.065326] Bluetooth: HIDP socket layer initialized [ 8.065406] 9pnet: Installing 9P2000 support [ 8.065562] Key type dns_resolver registered [ 8.067186] Registered cp15_barrier emulation handler [ 8.067253] Registered setend emulation handler [ 8.072289] registered taskstats version 1 [ 8.084537] isp 15600000.isp: initialized [ 8.095607] nvcsi 150c0000.nvcsi: initialized [ 8.100382] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 8.114278] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 8.114469] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 8.114650] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 8.115179] input: gpio-keys as /devices/gpio-keys/input/input2 [ 8.116681] tegra-vi4 15700000.vi: initialized [ 8.118770] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint. [ 8.118792] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint. [ 8.145620] tegra_rtc c2a0000.rtc: setting system clock to 2020-08-10 10:33:11 UTC (1597055591) [ 8.149556] mmcblk mmc0:0001: Card claimed for testing. [ 8.222099] bpmp: mounted debugfs mirror [ 8.227242] bwmgr: missing cdev-type property [ 8.233625] spmic-ldo0: disabling [ 8.233870] spmic-ldo1: disabling [ 8.234077] vdd-usb0-5v: disabling [ 8.234085] vdd-usb1-5v: disabling [ 8.234105] vdd-3v3: disabling [ 8.234113] en-vdd-vcm-2v8: disabling [ 8.234121] vdd-sys-bl: disabling [ 8.234130] ALSA device list: [ 8.234140] #0: tegra-hda at 0x3518000 irq 383 [ 8.234146] #1: tegra-snd-t186ref-mobile-rt565x [ 8.469144] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 8.469714] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 8.470272] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 8.470832] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 8.471373] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 8.471957] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 8.472500] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 8.473057] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 8.473612] mmc1: CMD CRC or end bit error, int mask 0xc0000 [ 8.474221] mmc1: CMD CRC or end bit error, int mask 0x40000 [ 9.999531] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 10.013570] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 10.027938] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 10.042585] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 10.056935] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 10.070831] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 10.085879] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 10.100670] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 10.116171] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 10.131356] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 10.161855] Wake76 for irq=199 [ 10.161862] Wake77 for irq=199 [ 10.161868] Wake78 for irq=199 [ 10.161873] Wake79 for irq=199 [ 10.161878] Wake80 for irq=199 [ 10.161883] Wake81 for irq=199 [ 10.161888] Wake82 for irq=199 [ 10.161987] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 10.162000] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 10.265260] usb usb2: usb_suspend_both: status 0 [ 12.190253] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 12.206267] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 12.222511] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 12.238412] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 12.254098] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 12.269666] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 12.285237] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 12.300804] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 12.313016] mmc1: CMD CRC or end bit error, int mask 0xc0001 [ 12.329263] mmc1: CMD CRC or end bit error, int mask 0x40001 [ 12.684839] tegra-xusb 3530000.xhci: entering ELPG [ 12.879544] tegra-xusb 3530000.xhci: entering ELPG done [ 14.798481] random: crng init done [ 15.402332] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 15.414088] Extcon HDMI: HPD enabled [ 15.422156] tegradc 15210000.nvdisplay: hdmi: plugged [ 15.447719] tegradc 15210000.nvdisplay: read_edid_into_buffer: extension_blocks = 1, max_ext_blocks = 3 [ 15.477927] tegradc 15210000.nvdisplay: hdmi_recheck_edid: read_edid_into_buffer() returned 256 [ 15.491479] tegradc 15210000.nvdisplay: old edid len = 256 [ 15.501683] tegradc 15210000.nvdisplay: hdmi: No EDID change. No userspace active. Using cached mode to initialize dc! [ 15.549929] tegradc 15210000.nvdisplay: blank - powerdown [ 15.601855] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 15.601865] Extcon AUX1(HDMI) disable [ 15.624859] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 15.624988] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 15.625940] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 15.661796] tegradc 15210000.nvdisplay: unblank [ 15.662999] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 15.663131] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 15.663283] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 15.666036] Parent Clock set for DC plld2 [ 15.671158] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 15.672748] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 15.672843] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 15.708927] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 15.708934] Extcon AUX1(HDMI) enable [ 16.780905] tegra-i2c c250000.i2c: pio timed out addr: 0x4c tlen:16 rlen:0 [ 16.780921] tegra-i2c c250000.i2c: --- register dump for debugging ---- [ 16.780935] tegra-i2c c250000.i2c: I2C_CNFG - 0x22c00 [ 16.780949] tegra-i2c c250000.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001 [ 16.780961] tegra-i2c c250000.i2c: I2C_FIFO_CONTROL - 0xe0 [ 16.780974] tegra-i2c c250000.i2c: I2C_FIFO_STATUS - 0x800070 [ 16.780987] tegra-i2c c250000.i2c: I2C_INT_MASK - 0x7c [ 16.780999] tegra-i2c c250000.i2c: I2C_INT_STATUS - 0x0 [ 16.781014] tegra-i2c c250000.i2c: i2c transfer timed out addr: 0x4c [ 16.781077] nct1008_nct72 7-004c: write reg err -110 [ 16.781088] nct1008_nct72 7-004c: sensor init failed 0xffffff92 [ 16.781100] nct1008_nct72 7-004c: [ 16.781100] exit nct1008_probe, err=-110 [ 16.781112] nct1008_nct72 7-004c: success in disabling tmp451 VDD rail [ 16.781149] nct1008_nct72: probe of 7-004c failed with error -110 [ 16.791024] Freeing unused kernel memory: 8576K [ 18.100502] extcon-disp-state external-connection:disp-state: cable 51 state 1 already set. [ 18.115811] Extcon HDMI: HPD enabled [ 18.126318] tegradc 15210000.nvdisplay: hdmi: plugged [ 18.197873] Root device found: mmcblk0p1 [ 18.214138] Found dev node: /dev/mmcblk0p1 [ 18.599353] EXT4-fs (mmcblk0p1): 4 orphan inodes deleted [ 18.611712] EXT4-fs (mmcblk0p1): recovery complete [ 18.631100] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 18.649227] Rootfs mounted over mmcblk0p1 [ 18.717034] Switching from initrd to actual rootfs [ 18.974519] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.041790] cgroup: cgroup2: unknown option "nsdelegate" [ 19.081602] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 19.124518] systemd[1]: Detected architecture arm64. [ 19.246387] systemd[1]: Set hostname to . [ 19.620065] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 19.646658] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 20.043651] systemd[1]: Created slice System Slice. [ 20.062548] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 20.079053] systemd[1]: Listening on RPCbind Server Activation Socket. [ 20.095926] systemd[1]: Listening on udev Control Socket. [ 20.119632] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 20.336648] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 21.577162] systemd-journald[2219]: Received request to flush runtime journal from PID 1 [ 24.497842] using random self ethernet address [ 24.535811] using random host ethernet address [ 27.235456] Mass Storage Function, version: 2009/09/11 [ 27.295585] LUN: removable file: (no medium) [ 27.371366] using random self ethernet address [ 27.408919] using random host ethernet address [ 27.519801] rndis0: HOST MAC 1a:da:05:a7:b3:ec [ 27.538498] rndis0: MAC 1a:da:05:a7:b3:ed [ 27.584695] usb0: HOST MAC 1a:da:05:a7:b3:ee [ 27.618051] usb0: MAC 1a:da:05:a7:b3:ef [ 27.649051] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 27.737030] l4tbr0: port 1(rndis0) entered blocking state [ 27.752663] l4tbr0: port 1(rndis0) entered disabled state [ 27.782203] device rndis0 entered promiscuous mode [ 27.815027] android_work: did not send uevent (0 0 (null)) [ 27.851864] android_work: sent uevent USB_STATE=CONNECTED [ 27.928506] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 28.011425] CPU1: shutdown [ 28.036982] psci: CPU1 killed. [ 28.043760] l4tbr0: port 2(usb0) entered blocking state [ 28.043773] l4tbr0: port 2(usb0) entered disabled state [ 28.046363] device usb0 entered promiscuous mode [ 28.076406] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 28.271562] CPU2: shutdown [ 28.288930] psci: CPU2 killed. [ 28.886964] zram: Added device: zram0 [ 28.902385] zram: Added device: zram1 [ 29.026903] zram: Added device: zram2 [ 29.051474] zram: Added device: zram3 [ 29.216466] zram0: detected capacity change from 0 to 502464512 [ 29.326822] Adding 490684k swap on /dev/zram0. Priority:5 extents:1 across:490684k SS [ 29.359701] zram1: detected capacity change from 0 to 502464512 [ 29.430390] Adding 490684k swap on /dev/zram1. Priority:5 extents:1 across:490684k SS [ 29.491243] zram2: detected capacity change from 0 to 502464512 [ 29.575745] Adding 490684k swap on /dev/zram2. Priority:5 extents:1 across:490684k SS [ 29.630003] zram3: detected capacity change from 0 to 502464512 [ 29.703241] Adding 490684k swap on /dev/zram3. Priority:5 extents:1 across:490684k SS [ 29.920107] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.025882] gpio tegra-gpio wake18 for gpio=101(M:5) [ 30.054910] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.093204] tegradc 15210000.nvdisplay: blank - powerdown [ 32.156666] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 32.156674] Extcon AUX1(HDMI) disable [ 32.181954] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 32.182328] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 32.183644] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 32.226868] tegradc 15210000.nvdisplay: unblank [ 32.229100] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 32.229260] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 32.229414] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 32.233541] Parent Clock set for DC plld2 [ 32.239981] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 32.241985] tegradc 15210000.nvdisplay: hdmi: get RGB quant from EDID. [ 32.242011] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 32.288016] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 32.288027] Extcon AUX1(HDMI) enable [ 32.368500] tegradc 15210000.nvdisplay: unblank [ 33.175592] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 33.184967] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 34.786881] fuse init (API version 7.26) Ubuntu 18.04.4 LTS linux ttyS0 linux login: [ 41.878381] android_work: sent uevent USB_STATE=DISCONNECTED [ 41.912066] android_work: sent uevent USB_STATE=CONNECTED [ 41.926852] android_work: sent uevent USB_STATE=DISCONNECTED [ 41.969663] android_work: sent uevent USB_STATE=CONNECTED [ 42.111109] android_work: sent uevent USB_STATE=DISCONNECTED [ 42.143459] android_work: sent uevent USB_STATE=CONNECTED [ 42.158700] android_work: sent uevent USB_STATE=DISCONNECTED [ 42.202234] android_work: sent uevent USB_STATE=CONNECTED [ 42.376027] configfs-gadget gadget: high-speed config #1: c [ 42.382001] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 42.389012] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 42.395969] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 42.403896] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 42.410872] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 42.417785] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 42.426355] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 42.433522] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 42.441999] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 42.447476] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 42.458952] android_work: sent uevent USB_STATE=CONFIGURED [ 42.497616] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 42.504464] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 42.511737] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 42.518105] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 42.518374] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 42.553953] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 42.560798] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled