07:16:04 /mnt/nfs/jetson_orin/r3411/Linux_for_Tegra $ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 005: ID 058f:6387 Alcor Micro Corp. Flash Drive Bus 001 Device 004: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 001 Device 003: ID 04d9:a0be Holtek Semiconductor, Inc. Bus 001 Device 012: ID 0955:7023 NVIDIA Corp. APX Bus 001 Device 007: ID 0cf3:e005 Qualcomm Atheros Communications Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 07:16:21 /mnt/nfs/jetson_orin/r3411/Linux_for_Tegra $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04.3 LTS Release: 20.04 Codename: focal 07:16:32 /mnt/nfs/jetson_orin/r3411/Linux_for_Tegra $ sudo ./flash.sh jetson-agx-orin-devkit mmcblk0p1 ############################################################################### # L4T BSP Information: # R34 , REVISION: 1.1 ############################################################################### # Target Board Information: # Name: jetson-agx-orin-devkit, Board Family: t186ref, SoC: Tegra 234, # OpMode: production, Boot Authentication: NS, # Disk encryption: disabled , ############################################################################### copying emc_fuse_dev_params(/mnt/nfs/jetson_orin/r3411/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-br-bct-diag-boot.dts)... done. copying device_config(/mnt/nfs/jetson_orin/r3411/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-device-p3701-0000.dts)... done. copying misc_config(/mnt/nfs/jetson_orin/r3411/Linux_for_Tegra/bootloader/t186ref/BCT/tegra234-mb1-bct-misc-p3701-0000.dts)... done. ./tegraflash.py --chip 0x23 --applet "/mnt/nfs/jetson_orin/r3411/Linux_for_Tegra/bootloader/mb1_t234_prod.bin" --skipuid --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --device_config tegra234-mb1-bct-device-p3701-0000.dts --misc_config tegra234-mb1-bct-misc-p3701-0000.dts --bins "mb2_applet applet_t234.bin" --cmd "dump eeprom cvm cvm.bin; dump custinfo custinfo_out.bin; reboot recovery" /mnt/nfs/jetson_orin/r3411/Linux_for_Tegra/bootloader/tegraflash_internal.py:2598: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not check_ismb2(): /mnt/nfs/jetson_orin/r3411/Linux_for_Tegra/bootloader/tegraflash_internal.py:2607: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: /mnt/nfs/jetson_orin/r3411/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:858: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0 and not self.check_is_mb2applet(): /mnt/nfs/jetson_orin/r3411/Linux_for_Tegra/bootloader/tegraflash_impl_t234.py:865: SyntaxWarning: "is not" with a literal. Did you mean "!="? while count is not 0: Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [ 4.1420 ] tegrarcm_v2 --chip 0x23 --ismb2applet [ 4.1450 ] File rcm_state open failed [ 4.1462 ] ERROR: failed to read rcm_state [ 4.1462 ] [ 4.2478 ] tegrasign_v3.py --key None --getmode mode.txt [ 4.2493 ] Assuming zero filled SBK key [ 4.1970 ] Pre-processing config: tegra234-mb1-bct-device-p3701-0000.dts [ 5.0132 ] Pre-processing config: tegra234-br-bct-diag-boot.dts [ 5.1264 ] Pre-processing config: tegra234-mb1-bct-misc-p3701-0000.dts [ 5.2499 ] Parsing partition layout [ 5.2760 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 5.3403 ] [ 5.3434 ] Parsing partition layout [ 5.3459 ] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [ 5.3963 ] [ 5.3964 ] Creating list of images to be signed [ 5.4227 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --list images_list.xml zerosbk [ 5.4266 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 5.4915 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 5.5360 ] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [ 5.6422 ] Header already present for mb1_t234_prod_aligned_sigheader.bin [ 5.6892 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 5.8025 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 5.8461 ] adding BCH for mb2_t234_aligned.bin [ 5.9534 ] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [ 6.0939 ] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [ 6.1380 ] adding BCH for mb2_t234_aligned.bin [ 6.4007 ] [ 6.4008 ] Generating signatures [ 6.5022 ] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key --sha sha512 [ 6.5029 ] Assuming zero filled SBK key [ 8.2206 ] Warning: pub_key.key is not found [ 8.1196 ] Generating br-bct [ 8.1261 ] Updating dev and MSS params in BR BCT [ 8.1285 ] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [ 8.1981 ] [ 8.1983 ] Updating bl info [ 8.2020 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 8.2052 ] WARNING: boot chain is not completed. set to 0 [ 8.4077 ] [ 8.4079 ] Get Signed section of bct [ 8.4112 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --listbct bct_list.xml [ 8.5026 ] [ 8.5027 ] Signing BCT [ 8.6042 ] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --sha sha512 [ 8.6056 ] Assuming zero filled SBK key [ 8.9199 ] Sha saved in br_bct_BR.sha [ 8.9870 ] Warning: pub_key.key is not found [ 8.8858 ] Updating BCT with signature [ 8.8894 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml [ 8.9872 ] [ 8.9873 ] Generating SHA2 Hash [ 9.0888 ] tegrasign_v3.py --key None --list bct_list.xml --sha sha512 [ 9.0901 ] Assuming zero filled SBK key [ 9.0901 ] Assuming zero filled SBK key [ 9.4055 ] Sha saved in br_bct_BR.sha [ 9.3714 ] Updating BCT with SHA2 Hash [ 9.3751 ] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 --updatesha bct_list_signed.xml [ 9.3784 ] Offset :68 Len :8124 [ 9.5948 ] [ 9.5949 ] Generating coldboot mb1-bct [ 9.5989 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 9.6023 ] MB1-BCT version: 0.7 [ 9.6029 ] ERROR: /misc/axi_ap_virtual_client is not supported [ 9.6081 ] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 9.6093 ] Added Platform Config 9 data with size :- 80 [ 9.6516 ] [ 9.6518 ] Updating mb1-bct with firmware information [ 9.6553 ] tegrabct_v2 --chip 0x23 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t234_min_prod.xml.bin [ 9.7522 ] [ 9.8012 ] tegrahost_v2 --chip 0x23 --align mb1_cold_boot_bct_MB1_aligned.bct [ 9.8061 ] [ 9.8094 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk [ 9.8124 ] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct [ 9.8650 ] [ 10.0112 ] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml --sha sha512 [ 10.0125 ] Assuming zero filled SBK key [ 10.1871 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 10.2380 ] [ 10.2840 ] Generating recovery mb1-bct [ 10.2872 ] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 10.2902 ] MB1-BCT version: 0.7 [ 10.2909 ] ERROR: /misc/axi_ap_virtual_client is not supported [ 10.2943 ] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [ 10.2947 ] Added Platform Config 9 data with size :- 80 [ 10.3394 ] [ 10.3396 ] Updating mb1-bct with firmware information [ 10.3430 ] tegrabct_v2 --chip 0x23 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo readinfo_t234_min_prod.xml.bin [ 10.4405 ] [ 10.4897 ] tegrahost_v2 --chip 0x23 --align mb1_bct_MB1_aligned.bct [ 10.4947 ] [ 10.4981 ] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk [ 10.5011 ] adding BCH for mb1_bct_MB1_aligned.bct [ 10.5533 ] [ 10.6990 ] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml --sha sha512 [ 10.7003 ] Assuming zero filled SBK key [ 10.8746 ] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk [ 10.9245 ] [ 10.9720 ] Error: Skip generating mem_bct because sdram_config is not defined [ 10.9721 ] Error: Skip generating mem_bct because sdram_config is not defined [ 10.9721 ] Copying signatures [ 10.9761 ] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [ 11.4519 ] [ 11.4557 ] Boot Rom communication [ 11.4590 ] tegrarcm_v2 --new_session --chip 0x23 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [ 11.4621 ] BR_CID: 0x80012344705DD28374000000160281C0 [ 11.5107 ] Sending bct_br [ 11.5600 ] ERROR: might be timeout in USB write. [ 16.6770 ] Error: Return value 3 Command tegrarcm_v2 --new_session --chip 0x23 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt Reading board information failed. 07:17:35 /mnt/nfs/jetson_orin/r3411/Linux_for_Tegra