[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (user@user-HP-ProDesk-600-G5-MT) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #3 SMP PREEMPT Wed Mar 31 16:07:36 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069d000 [ 0.000000] Found lut_mem: 00002008@a0697000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2030589 [ 0.000000] DMA zone: 7152 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 457725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1ffd06000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998861 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069d000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29176(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182188K/8122356K available (15294K kernel code, 2936K rwdata, 6684K rodata, 8576K init, 611K bss, 186504K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13e008 ( 2937 KB) [ 0.000000] .bss : 0xffffff800a13e008 - 0xffffff800a1d6f7c ( 612 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000614] Console: colour dummy device 80x25 [ 0.000626] console [tty0] enabled [ 0.000633] bootconsole [tegra_comb_uart0] disabled [ 0.000646] kmemleak: Kernel memory leak detector disabled [ 0.000664] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000679] pid_max: default: 32768 minimum: 301 [ 0.001791] Security Framework initialized [ 0.002403] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002413] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004058] ftrace: allocating 47120 entries in 185 pages [ 0.394671] sched-energy: Sched-energy-costs installed from DT [ 0.394690] ASID allocator initialised with 65536 entries [ 0.430146] tegra-id: chipid=21917. [ 0.430159] tegra-id: opt_subrevision=1. [ 0.430187] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.430201] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.430212] DTB Build time: Nov 14 2020 22:01:58 [ 0.477982] CPU1: Booted secondary processor [4e0f0040] [ 0.510566] CPU2: Booted secondary processor [4e0f0040] [ 0.542149] CPU3: Booted secondary processor [4e0f0040] [ 0.574437] CPU4: Booted secondary processor [4e0f0040] [ 0.606587] CPU5: Booted secondary processor [4e0f0040] [ 0.606826] Brought up 6 CPUs [ 0.606836] SMP: Total of 6 processors activated. [ 0.606845] CPU features: detected feature: Privileged Access Never [ 0.606851] CPU features: detected feature: LSE atomic instructions [ 0.606858] CPU features: detected feature: User Access Override [ 0.606864] CPU features: detected feature: 32-bit EL0 Support [ 0.608339] CPU: All CPU(s) started at EL2 [ 0.608389] alternatives: patching kernel code [ 0.614874] devtmpfs: initialized [ 0.652064] Initilizing CustomIPI irq domain [ 0.652300] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.652314] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.664496] pinctrl core: initialized pinctrl subsystem [ 0.664686] OS set in device tree is not L4T. [ 0.664912] regulator-dummy: no parameters [ 0.665163] Initializing plugin-manager [ 0.665215] Plugin module not found [ 0.665245] Plugin-manager status disabled [ 0.666749] NET: Registered protocol family 16 [ 0.669369] pstore: using zlib compression [ 0.669391] console [pstore-1] enabled [ 0.669396] pstore: Registered ramoops as persistent store backend [ 0.669403] ramoops: attached 0x200000@0xf0600000, ecc: 0/0 [ 0.685267] cpuidle: using governor menu [ 0.686524] bpmp: waiting for handshake [ 0.686532] bpmp: handshake completed [ 0.686546] bpmp: synchronizing channels [ 0.686555] bpmp: channels synchronized [ 0.686561] bpmp: mail init ok [ 0.689501] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.689668] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.689674] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.689681] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.689686] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.689692] t19x-arm-smmu 12000000.iommu: nested translation [ 0.689700] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.689708] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.689715] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.689722] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.689730] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.693146] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.693173] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.695627] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.697220] tegra_aon_clk_init: ok [ 0.697230] Registering BPMP clocks... [ 0.697347] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.698000] Serial: AMBA PL011 UART driver [ 0.698126] tegra_powergate_init: DONE [ 0.698198] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.698210] DTB Build time: Nov 14 2020 22:01:58 [ 0.701042] Tegra reboot handler registered. [ 0.708732] iommu: Adding device 14160000.pcie to group 0 [ 0.709331] iommu: Adding device 141a0000.pcie to group 1 [ 0.710616] iommu: Adding device 2490000.ether_qos to group 2 [ 0.711089] iommu: Adding device 3100000.serial to group 3 [ 0.711618] iommu: Adding device 3110000.serial to group 4 [ 0.711981] iommu: Adding device 3140000.serial to group 5 [ 0.712596] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.712821] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.712843] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.712848] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.712853] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.712902] tegra-pmc: PMC Prod config success [ 0.713091] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.713104] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.713459] iommu: Adding device 3400000.sdhci to group 6 [ 0.713903] iommu: Adding device 3210000.spi to group 7 [ 0.714283] iommu: Adding device 3230000.spi to group 8 [ 0.714631] iommu: Adding device 3270000.spi to group 9 [ 0.715623] iommu: Adding device 3160000.i2c to group 10 [ 0.715998] iommu: Adding device c240000.i2c to group 11 [ 0.716358] iommu: Adding device 3180000.i2c to group 12 [ 0.716716] iommu: Adding device 3190000.i2c to group 13 [ 0.717205] iommu: Adding device 31b0000.i2c to group 14 [ 0.717597] iommu: Adding device 31c0000.i2c to group 15 [ 0.717948] iommu: Adding device c250000.i2c to group 16 [ 0.718313] iommu: Adding device 31e0000.i2c to group 17 [ 0.718876] iommu: Adding device sound to group 18 [ 0.719378] iommu: Adding device 3510000.hda to group 19 [ 0.719884] iommu: Adding device bc00000.rtcpu to group 20 [ 0.721632] iommu: Adding device 13e10000.host1x to group 21 [ 0.722088] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.722516] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.722858] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.723244] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.723674] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.724080] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.724416] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.724800] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.725364] iommu: Adding device 15340000.vic to group 30 [ 0.725835] iommu: Adding device 15380000.nvjpg to group 31 [ 0.726168] iommu: Adding device 15500000.tsec to group 32 [ 0.726482] iommu: Adding device 15100000.tsecb to group 33 [ 0.726824] iommu: Adding device 15480000.nvdec to group 34 [ 0.727155] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.727460] iommu: Adding device 154c0000.nvenc to group 36 [ 0.727801] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.728284] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.728749] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.729384] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.729563] platform 15200000.nvdisplay: IOVA linear map 0x00000000a069d000(800000) [ 0.729575] platform 15200000.nvdisplay: IOVA linear map 0x00000000a0697000(3000) [ 0.733536] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.733651] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.734230] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.734277] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.736143] iommu: Adding device 15c10000.vi to group 42 [ 0.736313] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.736732] iommu: Adding device 14800000.isp to group 43 [ 0.737791] iommu: Adding device 16000000.pva0 to group 44 [ 0.738417] iommu: Adding device 16800000.pva1 to group 45 [ 0.738833] iommu: Adding device 15810000.se to group 46 [ 0.739261] iommu: Adding device 15820000.se to group 47 [ 0.739582] iommu: Adding device 15830000.se to group 48 [ 0.739981] iommu: Adding device 15840000.se to group 49 [ 0.740311] iommu: Adding device c1a0000.aon to group 50 [ 0.742013] iommu: Adding device d000000.bpmp to group 51 [ 0.742366] bpmp: ping status is 0 [ 0.742501] bpmp d000000.bpmp: firmware tag is 57f8a77779f848bf2ecf21dabee5645f [ 0.745591] bpmp d000000.bpmp: probe ok [ 0.747093] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.747532] iommu: Adding device smmu_test to group 52 [ 0.748596] mc: mapped MMIO address: 0xffffff800a590000 -> 0x2c10000 [ 0.748619] mc: mapped MMIO address: 0xffffff800a5b0000 -> 0x2c20000 [ 0.748639] mc: mapped MMIO address: 0xffffff800a5d0000 -> 0x2c30000 [ 0.748666] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c40000 [ 0.748703] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c50000 [ 0.748727] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2b80000 [ 0.748749] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b90000 [ 0.748765] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2ba0000 [ 0.748783] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2bb0000 [ 0.748799] mc: mapped MMIO address: 0xffffff800b090000 -> 0x1700000 [ 0.748814] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1710000 [ 0.748829] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1720000 [ 0.748845] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1730000 [ 0.748860] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1740000 [ 0.748875] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1750000 [ 0.748891] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1760000 [ 0.748906] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1770000 [ 0.748982] mc-err: mcerr ops are set to t19x [ 0.754739] iommu: Adding device 2600000.dma to group 53 [ 0.760053] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.761256] GPIO line 339 (wifi-enable) hogged as output/high [ 0.761299] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.761357] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.761680] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.769221] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.769282] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.769317] GPIO line 266 (w-disable1) hogged as output/high [ 0.769354] GPIO line 264 (w-disable2) hogged as output/high [ 0.769628] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.771738] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.771750] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.772424] iommu: Adding device 3550000.xudc to group 54 [ 0.773131] iommu: Adding device 3610000.xhci to group 55 [ 0.775421] arm64_ras arm64_ras: probed [ 0.775833] ras_fhi_enable: FHI 468 enabled on CPU0 [ 0.775882] ras_fhi_enable: FHI 469 enabled on CPU1 [ 0.775953] ras_fhi_enable: FHI 470 enabled on CPU2 [ 0.776030] ras_fhi_enable: FHI 471 enabled on CPU3 [ 0.776117] ras_fhi_enable: FHI 472 enabled on CPU4 [ 0.776190] ras_fhi_enable: FHI 473 enabled on CPU5 [ 0.776385] carmel_ras_enable: RAS enabled on cpu0 [ 0.776561] carmel_ras_enable: RAS enabled on cpu1 [ 0.776752] carmel_ras_enable: RAS enabled on cpu2 [ 0.776935] carmel_ras_enable: RAS enabled on cpu3 [ 0.777140] carmel_ras_enable: RAS enabled on cpu4 [ 0.777351] carmel_ras_enable: RAS enabled on cpu5 [ 0.777422] carmel_ras carmel_ras: probed [ 0.778995] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 477, noc_nonsecure_irq = 476> [ 0.779543] tegra-cbb c600000.aon-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.780497] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.781611] tegra-cbb be00000.rce-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.782620] tegra-cbb b600000.sce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.783045] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.784348] vdd-ac-bat: 5000 mV [ 0.784785] vdd-sdmmc1-sw: 3300 mV [ 0.785098] vdd-1v8-sd: 1800 mV [ 0.785414] vdd-3v3-cvb: 3300 mV [ 0.785742] vdd-1v8-cvb: 1800 mV [ 0.786124] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.786174] vdd-epb-1v0: 1000 mV [ 0.786589] avdd-cam-2v8: 2800 mV [ 0.786923] vdd-fan: 5000 mV [ 0.787221] vdd-hdmi-5v0: 5000 mV [ 0.787583] vdd_sys_en: 1200 mV [ 0.818996] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.823779] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.824050] SCSI subsystem initialized [ 0.824265] libata version 3.00 loaded. [ 0.824475] usbcore: registered new interface driver usbfs [ 0.824530] usbcore: registered new interface driver hub [ 0.824598] usbcore: registered new device driver usb [ 0.835676] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.838623] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.850424] vdd-1v0: at 1000 mV [ 0.858474] vdd-1v8-hs: at 1800 mV [ 0.866180] vdd-1v8-ls: at 1800 mV [ 0.874174] vdd-1v8-ao: at 1800 mV [ 0.882203] vddio-ddr-1v1: at 1100 mV [ 0.890010] vdd-rtc: at 800 mV [ 0.891062] spmic-ldo1: at 2375 mV [ 0.902019] vdd-ao-3v3: at 3300 mV [ 0.914086] vddio-emmc-3v3: at 3300 mV [ 0.915219] spmic-ldo4: at 1587 mV [ 0.926122] vdd-usb-3v3: at 3300 mV [ 0.938152] vddio-sdmmc1-3v3: at 3300 mV [ 0.946163] vdd-csi-1v2: at 1200 mV [ 0.947352] spmic-ldo8: at 1800 mV [ 0.951605] GPIO line 246 (gpio_default) hogged as output/high [ 0.952590] GPIO line 247 (gpio_default) hogged as output/high [ 0.952879] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.953149] max77620 4-003c: max77620 probe successful [ 0.953839] media: Linux media interface: v0.10 [ 0.953897] Linux video capture interface: v2.00 [ 0.955525] pps_core: LinuxPPS API ver. 1 registered [ 0.955532] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.955558] PTP clock support registered [ 0.955898] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.956152] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.956188] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.959034] trusty trusty: trusty version: Built: 20:53:35 Oct 27 2020 [ 0.959094] trusty trusty: selected api version: 3 (requested 3) [ 0.960256] Advanced Linux Sound Architecture Driver Initialized. [ 0.960715] Bluetooth: Core ver 2.22 [ 0.960761] NET: Registered protocol family 31 [ 0.960769] Bluetooth: HCI device and connection manager initialized [ 0.960783] Bluetooth: HCI socket layer initialized [ 0.960794] Bluetooth: L2CAP socket layer initialized [ 0.960823] Bluetooth: SCO socket layer initialized [ 0.963485] camchar: rtcpu character device driver loaded [ 0.964010] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.964100] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.965741] clocksource: Switched to clocksource arch_sys_counter [ 1.013700] VFS: Disk quotas dquot_6.6.0 [ 1.013845] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.014194] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.015715] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.015765] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.016071] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.016084] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.016106] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.016119] nvmap_page_pool_init: Total RAM pages: 1983963 [ 1.016127] nvmap_page_pool_init: nvmap page pool size: 247995 pages (968 MB) [ 1.016256] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.016555] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.019180] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.031466] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.031657] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.031828] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.031999] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.032164] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.033346] la/ptsa driver initialized. [ 1.033688] NET: Registered protocol family 2 [ 1.034624] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.034970] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.035571] TCP: Hash tables configured (established 65536 bind 65536) [ 1.035629] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.035754] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.036224] NET: Registered protocol family 1 [ 1.036839] RPC: Registered named UNIX socket transport module. [ 1.036867] RPC: Registered udp transport module. [ 1.036879] RPC: Registered tcp transport module. [ 1.036884] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.036895] PCI: CLS 0 bytes, default 64 [ 1.037176] Trying to unpack rootfs image as initramfs... [ 1.219209] Freeing initrd memory: 5432K [ 1.240004] host1x 13e10000.host1x: initialized [ 1.241852] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.246848] audit: initializing netlink subsys (disabled) [ 1.246891] audit: type=2000 audit(0.872:1): initialized [ 1.247706] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.257089] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.258415] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.259048] 9p: Installing v9fs 9p2000 file system support [ 1.264309] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.264488] io scheduler noop registered [ 1.264760] io scheduler cfq registered (default) [ 1.268602] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.269756] random: fast init done [ 1.303412] iommu: Adding device 2993000.adsp to group 56 [ 1.414841] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.415834] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.428241] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.428641] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.429233] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.429780] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.430159] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.434185] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.434437] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1875000, max_bw=1875000 [ 1.437448] tsec 15500000.tsec: initialized [ 1.439279] tsec 15100000.tsecb: initialized [ 1.443031] nvdec 15480000.nvdec: initialized [ 1.445556] nvdec 15140000.nvdec1: initialized [ 1.451581] falcon 15340000.vic: initialized [ 1.453461] falcon 15380000.nvjpg: initialized [ 1.455360] falcon 154c0000.nvenc: initialized [ 1.457399] falcon 15a80000.nvenc1: initialized [ 1.460377] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.461932] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.463382] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.464848] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.466204] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.467612] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.468995] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.470333] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.473904] t194-nvcsi 15a00000.nvcsi: initialized [ 1.479262] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.479707] scare-pigeon 14b00000.isp-thi: initialized [ 1.485443] pva 16000000.pva0: initialized [ 1.491195] pva 16800000.pva1: initialized [ 1.496217] nvdla 15880000.nvdla0: initialized [ 1.500942] nvdla 158c0000.nvdla1: initialized [ 1.502671] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.502685] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.502722] tegradccommon 15200000.dc_common: dma mapping done [ 1.502899] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.502911] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.503136] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.503162] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.503453] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.503460] tegra_cec 3960000.tegra_cec: probed [ 1.504295] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.504356] generic_infoframe_type: 0x87 [ 1.504490] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.504565] tegradc 15200000.nvdisplay: Display dc.ffffff800bd10000 registered with id=0 [ 1.508715] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s [ 1.508723] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz [ 1.508729] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.508974] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.509009] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.509889] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.512446] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.512456] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.516064] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.516606] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.516616] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.516934] tegradc 15200000.nvdisplay: probed [ 1.516939] kfuse 3830000.kfuse: initialized [ 1.524028] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.527208] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.528616] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.529505] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.531106] console [ttyTCU0] enabled [ 1.531489] [drm] Initialized [ 1.544845] brd: module loaded [ 1.550641] loop: module loaded [ 1.550736] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.550888] tegra_profiler: auth: init [ 1.551808] THERMAL EST: found 3 subdevs [ 1.551816] THERMAL EST num_resources: 0 [ 1.551823] [THERMAL EST subdev 0] [ 1.551830] [THERMAL EST subdev 1] [ 1.551836] [THERMAL EST subdev 2] [ 1.551849] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.552215] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.552221] THERMAL EST: thz register success. [ 1.552386] THERMAL EST: end of probe, return err: 0 [ 1.553177] sd: No Scsi addr parsed to reserve index [ 1.553222] hisi_sas: driver version v1.6 [ 1.564036] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.564044] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.564053] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.564282] Console: switching to colour frame buffer device 240x67 [ 1.564384] 1 ofpart partitions found on MTD device spi6.0 [ 1.564389] Creating 1 MTD partitions on "spi6.0": [ 1.564406] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.564421] tegradc 15200000.nvdisplay: fb registered [ 1.564749] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.565308] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.565403] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.567549] Parent Clock set for DC plld2 [ 1.571116] libphy: Fixed MDIO Bus: probed [ 1.571687] tun: Universal TUN/TAP device driver, 1.6 [ 1.571693] tun: (C) 1999-2004 Max Krasnyansky [ 1.574000] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.574008] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.574053] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.574057] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.574091] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.574096] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.574139] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.574144] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.632375] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.633067] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.633080] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.658645] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.658653] Extcon AUX1(HDMI) enable [ 1.659302] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.659374] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.659477] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.659536] tegradc 15210000.nvdisplay: Display dc.ffffff800d150000 registered with id=1 [ 1.659751] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.659789] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.668453] tegradc 15210000.nvdisplay: probed [ 1.668777] tegradc 15210000.nvdisplay: fb registered [ 1.672102] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.672112] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.672123] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.672138] tegradc 15210000.nvdisplay: blank - powerdown [ 1.672153] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.672158] Extcon DP: HPD disabled [ 1.672163] hpd: hpd_switch 0 [ 1.672168] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.672179] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.672187] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.792662] tegradc 15200000.nvdisplay: blank - powerdown [ 1.817424] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 2f 7f 86 [ 1.817569] libphy: dwc_phy: probed [ 1.820334] PPP generic driver version 2.4.2 [ 1.820720] PPP BSD Compression module registered [ 1.820725] PPP Deflate Compression module registered [ 1.820742] PPP MPPE Compression module registered [ 1.820747] NET: Registered protocol family 24 [ 1.820796] usbcore: registered new interface driver r8152 [ 1.820832] usbcore: registered new interface driver asix [ 1.820891] usbcore: registered new interface driver ax88179_178a [ 1.820917] usbcore: registered new interface driver cdc_ether [ 1.820941] usbcore: registered new interface driver net1080 [ 1.820988] usbcore: registered new interface driver cdc_subset [ 1.821015] usbcore: registered new interface driver zaurus [ 1.821052] usbcore: registered new interface driver cdc_ncm [ 1.821480] VFIO - User Level meta-driver version: 0.3 [ 1.822789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.822806] ehci-pci: EHCI PCI platform driver [ 1.822837] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.822846] ohci-pci: OHCI PCI platform driver [ 1.822898] ohci-platform: OHCI generic platform driver [ 1.827830] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.829808] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4d9c400 id [ 1.830146] usbcore: registered new interface driver uas [ 1.830200] usbcore: registered new interface driver usb-storage [ 1.830292] usbcore: registered new interface driver usbserial [ 1.832770] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.832774] Extcon AUX1(HDMI) disable [ 1.834027] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.834103] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.835007] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.835015] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.835182] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.835407] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.835594] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release [ 1.835654] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.835670] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.836364] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.836426] tegra-xusb 3610000.xhci: irq 463, io mem 0x03610000 [ 1.836651] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.836657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.836661] usb usb1: Product: xHCI Host Controller [ 1.836665] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.836669] usb usb1: SerialNumber: 3610000.xhci [ 1.837146] hub 1-0:1.0: USB hub found [ 1.837192] hub 1-0:1.0: 4 ports detected [ 1.837656] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.837667] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.837675] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.837935] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.837941] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.837946] usb usb2: Product: xHCI Host Controller [ 1.837950] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.837954] usb usb2: SerialNumber: 3610000.xhci [ 1.838533] hub 2-0:1.0: USB hub found [ 1.838571] hub 2-0:1.0: 4 ports detected [ 1.849681] mousedev: PS/2 mouse device common for all mice [ 1.849933] usbcore: registered new interface driver xpad [ 1.858890] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.860025] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.881585] tegradc 15200000.nvdisplay: unblank [ 1.883408] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.883698] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.892367] Parent Clock set for DC plld2 [ 1.897034] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.898442] tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.898452] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.933008] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.933012] Extcon AUX1(HDMI) enable [ 1.948622] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.979239] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.980148] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.980155] Extcon HDMI: HPD enabled [ 1.980175] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.980813] Wake73 for irq=42 [ 1.982112] rtc rtc1: alarm rtc device [ 1.982136] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.982168] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.982368] i2c /dev entries driver [ 1.984672] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.985274] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.985284] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.986457] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 1.994736] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 1.999011] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 1.999066] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 1.999074] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 1.999207] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 1.999300] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 1.999308] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 1.999591] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 1.999673] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 1.999680] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 1.999988] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 2.000073] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 2.000081] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 2.000444] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 2.000544] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 2.000551] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 2.000801] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 2.001463] FAN dev name: pwm-fan [ 2.001511] FAN:gpio request success. [ 2.001523] FAN: can't find tach_gpio [ 2.001534] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.001573] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.001965] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.001972] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.002588] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.002596] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.002603] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.002609] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.002615] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.002621] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.002627] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.002633] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.002640] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.002646] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.003877] device-mapper: uevent: version 1.0.3 [ 2.004266] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.007680] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.008806] cpuidle: Initializing cpuidle driver [ 2.009698] sdhci: Secure Digital Host Controller Interface driver [ 2.009703] sdhci: Copyright(c) Pierre Ossman [ 2.009706] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.010121] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.010952] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.012715] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 245 [ 2.017127] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.018500] tegra-se-nvhost 15810000.se: initialized [ 2.019892] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.020826] tegra-se-nvhost 15820000.se: initialized [ 2.021977] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.022941] tegra-se-nvhost 15830000.se: initialized [ 2.023605] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.024796] tegra-se-nvhost 15840000.se: initialized [ 2.025692] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.026042] hidraw: raw HID events driver (C) Jiri Kosina [ 2.027252] usbcore: registered new interface driver usbhid [ 2.027256] usbhid: USB HID core driver [ 2.032717] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.033761] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.034308] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.035119] denver_knobs_init:MTS_VERSION:50168445 [ 2.035288] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.035989] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.036399] t19x_cache tegra-cache: probed [ 2.038759] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.038767] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.039378] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.039910] PLL_AON clock registered [ 2.041126] Clocks initialized successfully [ 2.042830] nvpmodel: initialized successfully [ 2.044343] trusty-virtio trusty:virtio: initializing [ 2.044604] trusty_ipc virtio0: vring0: va(pa) ffffffc1e2a46000(0) qsz 32 notifyid 1 [ 2.044615] trusty_ipc virtio0: vring1: va(pa) ffffffc1e2aa4000(0) qsz 32 notifyid 2 [ 2.044749] trusty-virtio trusty:virtio: initializing done [ 2.044989] trusty_ipc virtio0: is online [ 2.045641] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.046223] usbcore: registered new interface driver snd-usb-audio [ 2.061882] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.061972] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.067116] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.067307] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.067469] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.067648] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.131209] OPE platform probe [ 2.131339] OPE platform probe successful [ 2.165795] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.181517] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.209900] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489 [ 2.209927] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.209931] usb 1-2: Product: 4-Port USB 2.0 Hub [ 2.209936] usb 1-2: Manufacturer: Generic [ 2.212151] hub 1-2:1.0: USB hub found [ 2.214237] hub 1-2:1.0: 4 ports detected [ 2.226055] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.226180] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.226296] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.226406] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.226539] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.226673] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.226799] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.226908] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.227023] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.227128] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.227238] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.227333] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.227426] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.227532] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.227614] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.227715] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.227817] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.227916] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.228010] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.228109] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.255192] u32 classifier [ 2.255198] Actions configured [ 2.255289] Initializing XFRM netlink socket [ 2.255906] NET: Registered protocol family 10 [ 2.256717] NET: Registered protocol family 17 [ 2.256731] NET: Registered protocol family 15 [ 2.256789] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.256862] Bluetooth: RFCOMM socket layer initialized [ 2.256879] Bluetooth: RFCOMM ver 1.11 [ 2.256886] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.256892] Bluetooth: HIDP socket layer initialized [ 2.256910] 9pnet: Installing 9P2000 support [ 2.256961] Key type dns_resolver registered [ 2.257999] Registered cp15_barrier emulation handler [ 2.258015] Registered setend emulation handler [ 2.259515] registered taskstats version 1 [ 2.260182] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.266552] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.266569] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.266579] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.266585] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.321466] mmc0: hw tuning done ... [ 2.321504] mmc0: new ultra high speed SDR104 SDXC card at address 5048 [ 2.321993] mmcblk0: mmc0:5048 SD128 116 GiB [ 2.325769] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.341772] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.367044] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549 [ 2.367050] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.367055] usb 1-3: Product: Bluetooth Radio [ 2.367059] usb 1-3: Manufacturer: Realtek [ 2.367063] usb 1-3: SerialNumber: 00e04c000001 [ 2.377803] tegra-pcie-dw 14160000.pcie: link is up [ 2.378002] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.378010] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.378019] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.378025] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.378030] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.378058] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.378216] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.378455] iommu: Adding device 0004:00:00.0 to group 58 [ 2.378761] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.378898] pci 0004:01:00.0: reg 0x10: [io 0x1000-0x10ff] [ 2.379101] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 2.379896] pci 0004:01:00.0: supports D1 D2 [ 2.379900] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.380205] iommu: Adding device 0004:01:00.0 to group 59 [ 2.394733] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.394740] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.394747] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 2.394829] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.394856] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.394862] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.394870] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.394888] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.394947] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.395150] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.395155] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.395162] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.395233] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.395837] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.397191] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.397208] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.397216] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.397221] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.513776] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.578307] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.578314] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.909227] tegra-pcie-dw 141a0000.pcie: link is down [ 2.909460] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.909468] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.909476] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 2.909483] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 2.909488] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.909537] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.909688] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.909951] iommu: Adding device 0005:00:00.0 to group 60 [ 2.910247] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.910270] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.910492] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.910500] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.910605] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.910754] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 2.910826] aer 0005:00:00.0:pcie002: unloading service driver aer [ 2.910942] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 2.911083] iommu: Removing device 0005:00:00.0 from group 60 [ 2.911146] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 2.912807] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 2.921782] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 2.924127] tegra-cbb 14040000.cv-noc: noc_secure_irq = 89, noc_nonsecure_irq = 88> [ 2.929489] tegra194-isp5 14800000.isp: initialized [ 2.936593] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 2.940136] tegra194-vi5 15c10000.vi: initialized [ 2.944314] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 2.944393] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 2.945168] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 2.946080] usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510 [ 2.946088] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.946092] usb 1-2.2: Product: USB Optical Mouse [ 2.946096] usb 1-2.2: Manufacturer: PixArt [ 2.948898] input: PixArt USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:093A:2510.0001/input/input4 [ 2.949136] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3610000.xhci-2.2/input0 [ 3.027997] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.028361] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.028551] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.028742] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.029126] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.029185] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.029436] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 3.029441] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.030414] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda [ 3.030926] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.030998] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.031123] input: gpio-keys as /devices/gpio-keys/input/input5 [ 3.037766] usb 1-2.4: new low-speed USB device number 5 using tegra-xusb [ 3.062808] tegra_rtc c2a0000.rtc: setting system clock to 2021-04-01 03:34:06 UTC (1617248046) [ 3.063392] mmcblk mmc0:5048: Card claimed for testing. [ 3.064070] usb 1-2.4: New USB device found, idVendor=1c4f, idProduct=0002 [ 3.064078] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.064082] usb 1-2.4: Product: USB Keyboard [ 3.064086] usb 1-2.4: Manufacturer: SIGMACHIP [ 3.067766] input: SIGMACHIP USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4:1.0/0003:1C4F:0002.0002/input/input6 [ 3.103932] bpmp: mounted debugfs mirror [ 3.109912] vdd-1v8-sd: disabling [ 3.109919] vdd-1v8-cvb: disabling [ 3.109922] vdd-epb-1v0: disabling [ 3.109926] avdd-cam-2v8: disabling [ 3.109929] vdd-fan: disabling [ 3.109932] vdd_sys_en: disabling [ 3.109941] ALSA device list: [ 3.109944] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 3.109948] #1: jetson-xaviernx-ape [ 3.111930] Freeing unused kernel memory: 8576K [ 3.126283] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-3610000.xhci-2.4/input0 [ 3.129154] input: SIGMACHIP USB Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.4/1-2.4:1.1/0003:1C4F:0002.0003/input/input7 [ 3.151702] Root device found: mmcblk0p1 [ 3.152956] Found dev node: /dev/mmcblk0p1 [ 3.186089] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-3610000.xhci-2.4/input1 [ 3.195284] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.196294] Rootfs mounted over mmcblk0p1 [ 3.227186] Switching from initrd to actual rootfs [ 3.490255] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.494999] cgroup: cgroup2: unknown option "nsdelegate" [ 3.515511] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.516125] systemd[1]: Detected architecture arm64. [ 3.523196] systemd[1]: Set hostname to . [ 3.630331] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.630344] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.778751] random: systemd: uninitialized urandom read (16 bytes read) [ 3.778788] systemd[1]: Reached target User and Group Name Lookups. [ 3.778978] random: systemd: uninitialized urandom read (16 bytes read) [ 3.781785] systemd[1]: Created slice User and Session Slice. [ 3.781864] random: systemd: uninitialized urandom read (16 bytes read) [ 3.781890] systemd[1]: Reached target Swap. [ 3.782576] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.782824] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.857924] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.949441] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.165969] systemd-journald[2350]: Received request to flush runtime journal from PID 1 [ 4.998119] random: crng init done [ 4.998265] random: 7 urandom warning(s) missed due to ratelimiting [ 5.449460] using random self ethernet address [ 5.449626] using random host ethernet address [ 6.021944] Wake76 for irq=199 [ 6.021952] Wake77 for irq=199 [ 6.021955] Wake78 for irq=199 [ 6.021958] Wake79 for irq=199 [ 6.021961] Wake80 for irq=199 [ 6.021964] Wake81 for irq=199 [ 6.021968] Wake82 for irq=199 [ 6.022011] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 6.022017] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 6.183343] Mass Storage Function, version: 2009/09/11 [ 6.183353] LUN: removable file: (no medium) [ 6.188562] using random self ethernet address [ 6.188724] using random host ethernet address [ 6.283329] rndis0: HOST MAC 3a:f0:52:0d:48:10 [ 6.283703] rndis0: MAC 3a:f0:52:0d:48:11 [ 6.284687] usb0: HOST MAC 3a:f0:52:0d:48:12 [ 6.284753] usb0: MAC 3a:f0:52:0d:48:13 [ 6.284778] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.285615] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.285637] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 6.285676] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.285938] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.286014] tegra-xudc-new 3550000.xudc: exiting ELPG [ 6.286499] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 6.286526] tegra-xudc-new 3550000.xudc: entering ELPG [ 6.286709] tegra-xudc-new 3550000.xudc: entering ELPG done [ 6.291220] l4tbr0: port 1(rndis0) entered blocking state [ 6.291228] l4tbr0: port 1(rndis0) entered disabled state [ 6.291404] device rndis0 entered promiscuous mode [ 6.296973] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 6.302253] l4tbr0: port 2(usb0) entered blocking state [ 6.302262] l4tbr0: port 2(usb0) entered disabled state [ 6.302490] device usb0 entered promiscuous mode [ 6.315768] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.346829] usb 2-3: new SuperSpeedPlus USB device number 2 using tegra-xusb [ 6.383457] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489 [ 6.383468] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.383473] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.383477] usb 2-3: Manufacturer: Generic [ 6.393831] hub 2-3:1.0: USB hub found [ 6.395723] hub 2-3:1.0: 4 ports detected [ 6.458234] usbcore: registered new interface driver btusb [ 6.470471] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 6.470478] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 6.470482] rtk_btcoex: create workqueue [ 6.471803] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 6.471895] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 6.471900] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0 [ 6.471903] rtk_btusb: patch_add [ 6.471906] rtk_btusb: auto suspend is disabled [ 6.471911] rtk_btusb: pid = 0x3549 [ 6.471916] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 6.471928] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 6.475438] rtk_btusb: btusb_probe: done [ 6.475448] rtk_btusb: btusb_open start [ 6.475454] rtk_btusb: btusb_open hdev->promisc ==0 [ 6.475533] usbcore: registered new interface driver rtk_btusb [ 6.475624] rtk_btusb: download_patch start [ 6.475629] rtk_btusb: chip type value: 0x73 [ 6.475633] rtk_btusb: HCI reset. [ 6.487001] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 6.487008] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 6.487012] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 6.487016] rtk_btusb: load_firmware start [ 6.487020] rtk_btusb: lmp_version = 0x8822 [ 6.487024] rtk_btusb: config filename rtl8822cu_config [ 6.523108] rtk_btusb: no bdaddr file /opt/bdaddr [ 6.523117] rtk_btusb: 55 ab 23 87 00 00 [ 6.523130] rtk_btusb: Config file length 6, new length 6 [ 6.523133] rtk_btusb: fw name is rtl8822cu_fw [ 6.526899] rtk_btusb: This is not 8723a, use new patch style! [ 6.527095] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 6.528003] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 6.528012] rtk_btusb: load_firmware: New gEVersion 3 [ 6.528016] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 6.528022] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 6.528025] rtk_btusb: fw_version = 0x98a42f7 [ 6.528028] rtk_btusb: number_of_total_patch = 3 [ 6.528031] rtk_btusb: chipID 4 [ 6.528035] rtk_btusb: patch_length 0x55f0 [ 6.528038] rtk_btusb: start_offset 0x00005d00 [ 6.528042] rtk_btusb: Svn version: 21761 [ 6.528046] rtk_btusb: Coexistence: BTCOEX_20190509-0d0d [ 6.528049] rtk_btusb: buf_len = 0x55f6 [ 6.528062] rtk_btusb: fw: exists, config file: exists [ 6.528065] rtk_btusb: load_firmware done [ 6.528086] rtk_btusb: download_data start [ 6.597924] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.597944] Bluetooth: BNEP socket layer initialized [ 6.644038] rtk_btusb: download_data done [ 6.644047] rtk_btusb: HCI reset. [ 6.655024] rtk_btusb: read_ver_rsp->lmp_subver = 0x42f7 [ 6.655032] rtk_btusb: read_ver_rsp->hci_rev = 0x98a [ 6.655035] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 6.655048] rtk_btusb: Rtk patch end 0 [ 6.655055] rtk_btusb: btusb_open set HCI_RUNNING [ 6.655094] rtk_btcoex: Open BTCOEX [ 6.655098] rtk_btusb: btusb_open end [ 6.658043] rtk_btcoex: BTCOEX hci_rev 0x098a [ 6.658051] rtk_btcoex: BTCOEX lmp_subver 0x42f7 [ 6.678036] rtk_btusb: btusb_notify: hci0 evt 3 [ 6.989803] usb 2-3: usb_suspend_both: status 0 [ 6.990037] usb usb2: usb_suspend_both: status 0 [ 7.277661] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 7.536865] zram: Added device: zram0 [ 7.545159] zram: Added device: zram1 [ 7.548758] zram: Added device: zram2 [ 7.556432] zram: Added device: zram3 [ 7.558741] zram: Added device: zram4 [ 7.560459] zram: Added device: zram5 [ 7.569656] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.579326] zram0: detected capacity change from 0 to 678387712 [ 7.617181] Adding 662484k swap on /dev/zram0. Priority:5 extents:1 across:662484k SS [ 7.622491] zram1: detected capacity change from 0 to 678387712 [ 7.655171] Adding 662484k swap on /dev/zram1. Priority:5 extents:1 across:662484k SS [ 7.673628] zram2: detected capacity change from 0 to 678387712 [ 7.692037] Adding 662484k swap on /dev/zram2. Priority:5 extents:1 across:662484k SS [ 7.695970] zram3: detected capacity change from 0 to 678387712 [ 7.713915] Adding 662484k swap on /dev/zram3. Priority:5 extents:1 across:662484k SS [ 7.716999] zram4: detected capacity change from 0 to 678387712 [ 7.740989] Adding 662484k swap on /dev/zram4. Priority:5 extents:1 across:662484k SS [ 7.744309] zram5: detected capacity change from 0 to 678387712 [ 7.759349] Adding 662484k swap on /dev/zram5. Priority:5 extents:1 across:662484k SS [ 7.894650] gpio tegra-gpio wake20 for gpio=52(G:4) [ 7.902786] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.971438] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.280998] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.484620] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.348402] tegradc 15200000.nvdisplay: blank - powerdown [ 9.398725] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 9.398729] Extcon AUX1(HDMI) disable [ 9.421373] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 9.422513] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 9.422752] tegradc 15200000.nvdisplay: unblank [ 9.423885] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 9.424002] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 9.426733] Parent Clock set for DC plld2 [ 9.433606] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 9.434981] tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID. [ 9.434991] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 9.470145] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 9.470149] Extcon AUX1(HDMI) enable [ 9.470213] tegradc 15200000.nvdisplay: unblank [ 9.470227] tegradc 15210000.nvdisplay: blank - powerdown [ 10.766559] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off [ 10.767355] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.804479] fuse init (API version 7.26) [ 13.448845] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 15.051685] tegradc 15200000.nvdisplay: unblank [ 15.051702] tegradc 15210000.nvdisplay: blank - powerdown [ 82.191155] FAN rising trip_level:1 cur_temp:46100 trip_temps[2]:60000 [ 176.276304] FAN cooling trip_level:0 cur_temp:37950 trip_temps[1]:46000 [ 422.674539] FAN rising trip_level:1 cur_temp:46300 trip_temps[2]:60000 [ 497.715024] FAN cooling trip_level:0 cur_temp:37800 trip_temps[1]:46000 [ 742.994337] FAN rising trip_level:1 cur_temp:46300 trip_temps[2]:60000 [ 830.354850] FAN cooling trip_level:0 cur_temp:37800 trip_temps[1]:46000