[BEGIN] 20/4/21 11:45:13 opt@opt-desktop:~$ [0000.108] C> I2C command failed [0000.111] C> block index = (4) and rail_id = (1) [0000.115] C> Addr: Reg = [0xe8:0x07]: 336166925 [0000.120] C> I2C command failed [0000.123] C> block index = (5) and rail_id = (1) [0000.127] C> Addr: Reg = [0xe8:0x07]: 336166925 [0000.311] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-1b47d5d9) [0000.319] I> bit @ 0xd480000 [0000.322] I> Boot-device: eMMC [0000.326] I> sdmmc bdev is already initialized [0000.331] I> pmic: reset reason (nverc) : 0x40 [0000.338] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0000.345] I> Found 31 partitions in SDMMC_USER (instance 3) [0000.351] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x10 [0000.356] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x0 [0000.361] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x10 [0000.366] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x0 [0000.371] I> OEM carveouts init scrub in progress... [0000.447] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x10 [0000.452] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x0 [0000.457] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x10 [0000.462] I> MB2 check ECC error: EMC_INTSTATUS_0: 0x0 [0000.467] I> Mb2 SDRAM scrub successful [0000.471] I> A/B: bin_type (16) slot 0 [0000.475] I> Loading partition bpmp-fw at 0xd7800000 [0000.479] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.485] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.500] I> Binary(16) of size 532656 is loaded @ 0xd7800000 [0000.506] I> A/B: bin_type (17) slot 0 [0000.509] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.515] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.520] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.529] I> Binary(17) of size 75600 is loaded @ 0xd79ed600 [0000.564] I> Loading SCE-FW ... [0000.567] I> A/B: bin_type (12) slot 0 [0000.571] I> Loading partition sce-fw at 0xd7300000 [0000.575] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.581] I> Addr: 0xd7300000, start-block: 58782024, num_blocks: 1 [0000.590] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.596] I> Init SCE [0000.598] I> Loading APE-FW ... [0000.601] I> A/B: bin_type (11) slot 0 [0000.605] I> Loading partition adsp-fw at 0xd7400000 [0000.610] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.615] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.624] I> Binary(11) of size 106240 is loaded @ 0xd7400000 [0000.630] I> Copy BTCM section [0000.633] I> A/B: bin_type (13) slot 0 [0000.637] I> Loading partition cpu-bootloader at 0x96000000 [0000.642] I> Reading two headers - addr:0x96000000 blocks:1 [0000.648] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.659] I> Binary(13) of size 275920 is loaded @ 0x96000000 [0000.665] I> A/B: bin_type (20) slot 0 [0000.669] I> Loading partition bootloader-dtb at 0x8520f400 [0000.674] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.680] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.692] I> Binary(20) of size 337392 is loaded @ 0x8520f400 [0000.698] I> A/B: bin_type (14) slot 0 [0000.701] I> Loading partition secure-os at 0x8530f600 [0000.706] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.712] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.721] I> Binary(14) of size 83360 is loaded @ 0x8530f600 [0000.728] I> boot profiler @ 0x235844000 [0000.733] I> Unhalting SCE [0000.735] I> Primary Memory Start:80000000 Size:70000000 [0000.740] I> Extended Memory Start:f0110000 Size:1456f0000 [0000.747] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):eca0c5e NOTICE: BL31: Built : 00:20:29, Mar 13 2019 ERROR: Error initializing runtime service trusty_fast [0000.950] I> Welcome to Cboot [0000.953] I> Cboot Version: t186-13ef9e7a [0000.956] I> CPU-BL Params @ 0x235800000 [0000.960] I> Dram Scrub in progress [0001.604] I> DRAM Scrub Successful [0001.607] I> 0) Base:0x00000000 Size:0x00000000 [0001.611] I> 1) Base:0x237f00000 Size:0x00100000 [0001.616] I> 2) Base:0x237e00000 Size:0x00100000 [0001.620] I> 3) Base:0x237d00000 Size:0x00100000 [0001.625] I> 4) Base:0x237c00000 Size:0x00100000 [0001.629] I> 5) Base:0x237b00000 Size:0x00100000 [0001.634] I> 6) Base:0x237800000 Size:0x00200000 [0001.638] I> 7) Base:0x237400000 Size:0x00400000 [0001.643] I> 8) Base:0x237a00000 Size:0x00100000 [0001.647] I> 9) Base:0x237300000 Size:0x00100000 [0001.652] I> 10) Base:0x236800000 Size:0x00800000 [0001.656] I> 11) Base:0x30000000 Size:0x00040000 [0001.661] I> 12) Base:0xf0000000 Size:0x00100000 [0001.665] I> 13) Base:0x30040000 Size:0x00001000 [0001.670] I> 14) Base:0x30048000 Size:0x00001000 [0001.674] I> 15) Base:0x30049000 Size:0x00001000 [0001.679] I> 16) Base:0x3004a000 Size:0x00001000 [0001.683] I> 17) Base:0x3004b000 Size:0x00001000 [0001.687] I> 18) Base:0x3004c000 Size:0x00001000 [0001.692] I> 19) Base:0x3004d000 Size:0x00001000 [0001.696] I> 20) Base:0x3004e000 Size:0x00001000 [0001.701] I> 21) Base:0x3004f000 Size:0x00001000 [0001.705] I> 22) Base:0x00000000 Size:0x00000000 [0001.710] I> 23) Base:0xf0100000 Size:0x00010000 [0001.714] I> 24) Base:0x00000000 Size:0x00000000 [0001.718] I> 25) Base:0x00000000 Size:0x00000000 [0001.723] I> 26) Base:0x00000000 Size:0x00000000 [0001.727] I> 27) Base:0x00000000 Size:0x00000000 [0001.732] I> 28) Base:0x84400000 Size:0x00400000 [0001.736] I> 29) Base:0x30000000 Size:0x00010000 [0001.741] I> 30) Base:0x238000000 Size:0x08000000 [0001.745] I> 31) Base:0x00000000 Size:0x00000000 [0001.750] I> 32) Base:0x236000000 Size:0x00600000 [0001.754] I> 33) Base:0x80000000 Size:0x70000000 [0001.758] I> 34) Base:0xf0110000 Size:0x1456f0000 [0001.763] I> 35) Base:0x00000000 Size:0x00000000 [0001.767] I> 36) Base:0x00000000 Size:0x00000000 [0001.772] I> 37) Base:0x2372e0000 Size:0x00020000 [0001.776] I> 38) Base:0x84000000 Size:0x00400000 [0001.781] I> 39) Base:0x96000000 Size:0x02000000 [0001.785] I> 40) Base:0x85000000 Size:0x01200000 [0001.790] I> 41) Base:0x235800000 Size:0x00500000 [0001.794] I> 42) Base:0x00000000 Size:0x00000000 [0001.799] I> 43) Base:0x00000000 Size:0x00000000 [0001.803] GIC-SPI Target CPU: 4 [0001.806] Interrupts Init done [0001.810] calling constructors [0001.813] initializing heap [0001.815] initializing threads [0001.819] initializing timers [0001.822] creating bootstrap completion thread [0001.826] top of bootstrap2() [0001.829] CPU: ARM Cortex A57 [0001.833] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.838] initializing platform [0001.841] I> Boot-device: eMMC [0001.844] I> sdmmc bdev is already initialized [0001.850] I> Found 16 partitions in SDMMC_BOOT (instance 3) [0001.857] I> Found 31 partitions in SDMMC_USER (instance 3) [0001.862] W> opt-in fuse is not set, skip fuse_burning [0001.867] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.873] W> No valid slot number is found in scratch register [0001.879] W> Return default slot: _a [0001.882] I> A/B: bin_type (21) slot 0 [0001.886] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.899] I> Kernel_dtb @0x80000000 [0001.902] I> Bl_dtb @0x8520f400 [0001.905] I> gpio framework initialized [0001.911] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.921] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.929] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.937] E> I2C: slave not found in slaves. [0001.941] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.949] E> I2C_DEV: Failed to send register address 0x00000004. [0001.955] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.964] E> tca9539_device_init: failed to write polar reg [0001.970] E> tegrabl_tca9539_init: failed to init device! [0001.975] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.982] E> I2C: slave not found in slaves. [0001.986] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.993] E> I2C_DEV: Failed to send register address 0x00000004. [0001.999] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0002.009] E> tca9539_device_init: failed to write polar reg [0002.014] E> tegrabl_tca9539_init: failed to init device! [0002.022] I> fixed regulator driver initialized [0002.054] I> register 'maxim' power off handle [0002.060] I> virtual i2c enabled [0002.063] I> registered 'maxim,max77620' pmic [0002.067] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0002.080] I> Find /i2c@c250000's alias i2c7 [0002.084] I> Reading eeprom i2c=7 address=0x50 [0002.114] I> Device at /i2c@c250000:0x50 [0002.118] I> Reading eeprom i2c=7 address=0x57 [0002.122] E> I2C: slave not found in slaves. [0002.126] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.134] E> I2C_DEV: Failed to send register address 0x00000000. [0002.140] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0002.150] E> eeprom: Failed to read I2C slave device [0002.154] I> Eeprom read failed 0x3526070d [0002.159] I> Find /i2c@c240000's alias i2c1 [0002.163] I> Reading eeprom i2c=1 address=0x51 [0002.168] E> I2C: slave not found in slaves. [0002.172] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.180] E> I2C_DEV: Failed to send register address 0x00000000. [0002.186] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.195] E> eeprom: Retry to read I2C slave device. [0002.200] E> I2C: slave not found in slaves. [0002.204] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.212] E> I2C_DEV: Failed to send register address 0x00000000. [0002.218] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.227] E> eeprom: Failed to read I2C slave device [0002.232] I> Eeprom read failed 0x3526070d [0002.237] I> Find /i2c@3160000's alias i2c0 [0002.241] I> Reading eeprom i2c=0 address=0x50 [0002.245] E> I2C: slave not found in slaves. [0002.249] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.257] E> I2C_DEV: Failed to send register address 0x00000000. [0002.263] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.272] E> eeprom: Failed to read I2C slave device [0002.277] I> Eeprom read failed 0x3526070d [0002.282] I> Find /i2c@3180000's alias i2c2 [0002.286] I> Reading eeprom i2c=2 address=0x54 [0002.290] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.295] C> GPIO driver for chip_id 0x2 could not be found [0002.300] E> cam_eeprom_read: Can't get gpio driver [0002.305] I> Eeprom read failed 0x4d4d000d [0002.309] I> Reading eeprom i2c=2 address=0x57 [0002.313] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.318] C> GPIO driver for chip_id 0x2 could not be found [0002.323] E> cam_eeprom_read: Can't get gpio driver [0002.328] I> Eeprom read failed 0x4d4d000d [0002.332] I> create_pm_ids: id: 3489-0000-300-M, len: 15 [0002.337] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.370] I> enabling 'vdd-hdmi' regulator [0002.373] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.382] E> cannot find any other nvdisp nodes [0002.387] E> no valid display unit config found in dtb [0002.392] W> display init failed [0002.395] initializing target [0002.398] calling apps_init() [0002.401] starting app kernel_boot_app [0002.407] I> found decompressor handler: lz4-legacy [0002.412] I> decompressing BMP blob ... [0002.422] I> Kernel type = Normal [0002.425] I> Loading kernel/boot.img from built-in storage ... [0002.431] W> No valid slot number is found in scratch register [0002.437] W> Return default slot: _a [0002.440] I> A/B: bin_type (24) slot 0 [0003.200] I> Boot image size read from image header: f20d0 [0003.205] I> Boot image load address: 0x0x80400000 [0003.210] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.972] I> Kernel hdr @0x80400000 [0003.975] I> Kernel dtb @0x80000000 [0003.979] I> T18x: Authenticate boot.img (bin_type 24), max size 0x4000000 [0003.986] I> T18x: Authenticate tegra194-p2888-0001-p2822-0000.dtb (bin_type 21), max size 0x100000 [0003.996] I> Checking boot.img header magic ... [0004.000] I> [OK] [0004.002] I> Valid boot.img @ 0x80400000 [0004.005] I> decompressor handler not found [0004.009] I> Copying kernel image (474242 bytes) from 0x80400800 to 0x84600000 ... [0004.017] I> Done [0004.019] I> Move ramdisk (len: 0) from 0x80474800 to 0x98730000 [0004.026] I> Updated bpmp info to DTB [0004.032] I> Ramdisk: Base: 0x98730000; Size: 0x0 [0004.036] I> Updated initrd info to DTB [0004.040] W> WARN: Fail to override "console=none" in commandline [0004.046] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0004.053] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0004.060] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0004.067] I> disabled_core_mask: 0xffffff0c [0004.071] W> No valid slot number is found in scratch register [0004.077] W> Return default slot: _a [0004.080] I> Active slot suffix: [0004.084] I> add_boot_slot_suffix: slot_suffix = [0004.088] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=none keep_bootcon video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2372e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x235840000 sdhci_tegra.en_boot_part_access=1 [0004.122] I> Updated bootarg info to DTB [0004.126] I> eeprom_get_mac_addr: MAC (type: 0): 00:ff:ff:ff:ff:ff [0004.132] I> eeprom_get_mac_addr: MAC (type: 1): 00:ff:ff:ff:ff:ff [0004.139] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:a9:30:3f [0004.147] E> Found no plugin manager ids in source DT [0004.151] W> Add plugin manager ids from board info [0004.156] E> "plugin-manager" doesn't exist, creating [0004.161] E> "ids" doesn't exist, creating [0004.165] E> "connection" doesn't exist, creating [0004.170] E> "configs" doesn't exist, creating [0004.174] I> create_pm_ids: id: 3489-0000-300-M, len: 15 [0004.179] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0004.190] I> Adding plugin-manager/ids/3489-0000-300=/i2c@c250000:module@0x50 [0004.197] E> "i2c@c250000" doesn't exist, creating [0004.202] E> "module@0x50" doesn't exist, creating [0004.209] I> Adding plugin-manager/ids/3489-0000-300-M [0004.216] I> Adding plugin-manager/configs/3489-mem-type 00 [0004.221] I> Adding plugin-manager/configs/3489-power-config 00 [0004.227] I> Adding plugin-manager/configs/3489-misc-config 00 [0004.233] I> Adding plugin-manager/configs/3489-modem-config 00 [0004.239] I> Adding plugin-manager/configs/3489-touch-config 00 [0004.245] I> Adding plugin-manager/configs/3489-display-config 00 [0004.251] I> Adding plugin-manager/cvm [0004.255] E> "chip-id" doesn't exist, creating [0004.259] I> Adding plugin-manager/chip-id/A02P [0004.264] E> "odm-data" doesn't exist, creating [0004.268] I> Adding /chosen/plugin-manager/odm-data [0004.278] I> added [base:0x80000000, size:0x70000000] to /memory [0004.284] I> added [base:0xf0200000, size:0x145600000] to /memory [0004.290] I> added [base:0x235e00000, size:0x200000] to /memory [0004.296] I> added [base:0x236600000, size:0x200000] to /memory [0004.301] I> added [base:0x237000000, size:0x200000] to /memory [0004.307] I> Updated memory info to DTB [0004.312] E> add_disp_param: failed to get display params for du=0 [0004.319] E> "reset" doesn't exist, creating [0004.323] E> "pmc-reset-reason" doesn't exist, creating [0004.329] E> "pmic-reset-reason" doesn't exist, creating [0004.335] I> Adding ecid(00000001644483c91c00000013fd0180) to DT [0004.341] I> disabled_core_mask: 0xffffff0c [0004.353] I> Add serial number:0422918061139 as DT property [0004.361] I> Plugin-manager override starting [0004.367] I> node /plugin-manager/fragement@0 matches [0004.376] I> node /plugin-manager/fragement@4 matches [0004.417] I> node /plugin-manager/fragment-p3310-c00-camera matches [0004.443] I> Disable plugin-manager status in FDT [0004.448] I> Plugin-manager override finished successfully [0004.453] I> tegrabl_load_kernel_and_dtb: Done [0004.457] I> Sending TOS params [0004.460] I> Sending NS DRAM Ranges to TOS [0004.464] W> Failed to send NS DRAM Ranges to TOS [0004.469] W> Failed to lock interface between BL and TOS [0004.474] E> tegrabl_display_clear: display is not initialized [0004.479] W> Boot logo display failed... [0004.483] I> Kernel EP: 0x84600000, DTB: 0x80000000 U-Boot 2016.07-g0eb73f4 (Mar 13 2019 - 00:20:34 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 6.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 213 bytes read in 95 ms (2 KiB/s) p2771-0000 eMMC boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/Image 34048008 bytes read in 854 ms (38 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=none keep_bootcon video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2372e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x235840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 000000008005757f Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2988) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:30:11 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 145600000 [ 0.000000] OF: fdt: - 235e00000 , 200000 [ 0.000000] OF: fdt: - 236600000 , 200000 [ 0.000000] OF: fdt: - 237000000 , 200000 [ 0.000000] debug: skip boot console de-registration. [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc1b6776000 s53400 r8192 d32616 u94208 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1764920 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait fbcon=map:0 net.ifnames=0 console=none keep_bootcon video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2372e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x235840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29352(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 6942628K/7172096K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 163932K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB) [ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB) [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf06dc8000 ( 109 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1b7200000 ( 7026 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009903] Console: colour dummy device 80x25 [ 0.014548] kmemleak: Kernel memory leak detector disabled [ 0.020263] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.031043] pid_max: default: 32768 minimum: 301 [ 0.036156] Security Framework initialized [ 0.040576] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.047727] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.055968] ftrace: allocating 46802 entries in 183 pages [ 0.187816] sched-energy: Sched-energy-costs installed from DT [ 0.193912] ASID allocator initialised with 65536 entries [ 0.236324] tegra-id: chipid=21817. [ 0.239967] tegra-id: opt_subrevision=1. [ 0.244060] Tegra Revision: A02p SKU: 0x90 CPU Process: 0 SoC Process: 0 [ 0.251037] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3489-1000-a00-00-base.dts [ 0.269862] DTB Build time: [ 0.321942] CPU1: Booted secondary processor [4e0f0030] [ 0.353554] CPU2: Booted secondary processor [4e0f0030] [ 0.385399] CPU3: Booted secondary processor [411fd073] [ 0.417395] CPU4: Booted secondary processor [411fd073] [ 0.449390] CPU5: Booted secondary processor [411fd073] [ 0.449444] Brought up 6 CPUs [ 0.479698] SMP: Total of 6 processors activated. [ 0.484593] CPU features: detected feature: 32-bit EL0 Support [ 0.491432] CPU: All CPU(s) started at EL2 [ 0.495754] alternatives: patching kernel code [ 0.509883] devtmpfs: initialized [ 0.549243] Initilizing CustomIPI irq domain [ 0.553881] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.564032] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.573263] pinctrl core: initialized pinctrl subsystem [ 0.579248] OS set in device tree is not L4T. [ 0.584332] regulator-dummy: no parameters [ 0.588943] Initializing plugin-manager [ 0.593059] Plugin module not found [ 0.596778] Plugin-manager status disabled [ 0.605279] NET: Registered protocol family 16 [ 0.611827] pstore: using zlib compression [ 0.617131] console [pstore-1] enabled [ 0.621083] pstore: Registered ramoops as persistent store backend [ 0.627533] ramoops: attached 0x200000@0x235880000, ecc: 0/0 [ 0.641398] random: fast init done [ 0.649993] cpuidle: using governor menu [ 0.656637] bpmp: waiting for handshake [ 0.660658] bpmp: handshake completed [ 0.664522] bpmp: synchronizing channels [ 0.668640] bpmp: channels synchronized [ 0.672672] bpmp: mail init ok [ 0.679735] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.686588] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.691517] arm-smmu 12000000.iommu: stage 1 translation [ 0.697172] arm-smmu 12000000.iommu: stage 2 translation [ 0.702849] arm-smmu 12000000.iommu: nested translation [ 0.708423] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.717167] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.728168] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.735094] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.742046] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.753190] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000) [ 0.760979] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.770301] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.781292] Registering BPMP clocks... [ 0.785341] tegra_bpmp_clk_init: clock init ok (636 clks) [ 0.792809] tegra_bpmp_of_clk_init: EMC proxy not found. [ 0.800285] tegra_powergate_init: DONE [ 0.804257] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3489-1000-a00-00-base.dts [ 0.823144] DTB Build time: [ 0.830621] Tegra reboot handler registered. [ 0.837288] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.844571] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.850897] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.857272] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.863542] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.869070] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.876638] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.883378] iommu: Adding device 3460000.sdhci to group 0 [ 0.889690] iommu: Adding device 3440000.sdhci to group 1 [ 0.896179] iommu: Adding device 3400000.sdhci to group 2 [ 0.903889] iommu: Adding device 3507000.ahci-sata to group 3 [ 0.910001] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.916702] iommu: Adding device 3160000.i2c to group 4 [ 0.922835] iommu: Adding device c240000.i2c to group 5 [ 0.928787] iommu: Adding device 3180000.i2c to group 6 [ 0.934746] iommu: Adding device 3190000.i2c to group 7 [ 0.941401] iommu: Adding device 31b0000.i2c to group 8 [ 0.947495] iommu: Adding device 31c0000.i2c to group 9 [ 0.953446] iommu: Adding device c250000.i2c to group 10 [ 0.959545] iommu: Adding device 31e0000.i2c to group 11 [ 0.967629] iommu: Adding device 3210000.spi to group 12 [ 0.973867] iommu: Adding device c260000.spi to group 13 [ 0.980050] iommu: Adding device 3240000.spi to group 14 [ 0.986638] iommu: Adding device 3100000.serial to group 15 [ 0.992965] iommu: Adding device 3110000.serial to group 16 [ 0.999258] iommu: Adding device c280000.serial to group 17 [ 1.005549] iommu: Adding device 3130000.serial to group 18 [ 1.013186] iommu: Adding device 2490000.ether_qos to group 19 [ 1.019357] arm-smmu: forcing sodev map for 2490000.ether_qos [ 1.026312] iommu: Adding device b000000.rtcpu to group 20 [ 1.034785] iommu: Adding device 13e10000.host1x to group 21 [ 1.041285] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 1.048108] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 1.054945] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 1.061739] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 1.068632] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 1.075420] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 1.082274] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 1.089165] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 1.096220] iommu: Adding device 150c0000.nvcsi to group 30 [ 1.102999] iommu: Adding device 15700000.vi to group 31 [ 1.109006] iommu: Adding device 15600000.isp to group 32 [ 1.115278] iommu: Adding device 15210000.nvdisplay to group 33 [ 1.122241] iommu: Adding device 15340000.vic to group 34 [ 1.128784] iommu: Adding device 154c0000.nvenc to group 35 [ 1.135008] iommu: Adding device 15480000.nvdec to group 36 [ 1.141335] iommu: Adding device 15380000.nvjpg to group 37 [ 1.147493] iommu: Adding device 15500000.tsec to group 38 [ 1.153620] iommu: Adding device 15100000.tsecb to group 39 [ 1.160378] iommu: Adding device 15810000.se to group 40 [ 1.166530] iommu: Adding device 15820000.se to group 41 [ 1.172422] iommu: Adding device 15830000.se to group 42 [ 1.178310] iommu: Adding device 15840000.se to group 43 [ 1.184989] iommu: Adding device smmu_test to group 44 [ 1.191215] mc: mapped MMIO address: 0xffffff800a680000 -> 0x2c10000 [ 1.197859] mc: mapped MMIO address: 0xffffff800a6a0000 -> 0x2c20000 [ 1.204543] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c30000 [ 1.211180] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c40000 [ 1.217825] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c50000 [ 1.224441] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 1.229718] mc-err: mcerr ops are set to t18x [ 1.234471] dram-ecc: DRAM ECC enabled-MC_ECC_CONTROL:0x0000000d [ 1.240785] dram-ecc: SCE-R5 is booted with Camera FW [ 1.246077] dram-ecc: DRAM ECC interrupts handled in Camera FW [ 1.253578] iommu: Adding device 3530000.xhci to group 45 [ 1.259240] arm-smmu: forcing sodev map for 3530000.xhci [ 1.265370] iommu: Adding device 3550000.xudc to group 46 [ 1.271008] arm-smmu: forcing sodev map for 3550000.xudc [ 1.277525] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 1.283699] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 1.291919] iommu: Adding device 17000000.gp10b to group 47 [ 1.299084] tegra-reset 5000000.clock: registered 193 resets. [ 1.307890] iommu: Adding device d000000.bpmp to group 48 [ 1.313942] bpmp: ping status is 0 [ 1.317628] bpmp d000000.bpmp: firmware tag is 69fa4e41a01fc02a4db1adf71922a54c [ 1.329287] bpmp d000000.bpmp: probe ok [ 1.337401] iommu: Adding device 2600000.dma to group 49 [ 1.344521] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 1.351211] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 1.358424] GPIO line 461 (camera-control-output-low) hogged as output/low [ 1.365612] GPIO line 456 (camera-control-output-low) hogged as output/low [ 1.372809] GPIO line 457 (camera-control-output-low) hogged as output/low [ 1.380001] GPIO line 426 (camera-control-output-low) hogged as output/low [ 1.387496] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 1.402195] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 1.413789] iommu: Adding device 10003000.pcie-controller to group 50 [ 1.420522] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 1.427613] iommu: Adding device sound to group 51 [ 1.433065] iommu: Adding device 3510000.hda to group 52 [ 1.448946] iommu: Adding device c1a0000.aon to group 53 [ 1.455204] vdd-ac-bat: 5000 mV [ 1.461483] vdd-1v8-ap: 1800 mV [ 1.498875] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.510453] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.517216] SCSI subsystem initialized [ 1.521571] usbcore: registered new interface driver usbfs [ 1.527376] usbcore: registered new interface driver hub [ 1.533051] usbcore: registered new device driver usb [ 1.540877] tegra-i2c 3160000.i2c: no acknowledge from address 0x74 [ 1.547441] pca953x 0-0074: failed reading register [ 1.552630] pca953x: probe of 0-0074 failed with error -121 [ 1.558813] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 1.565370] pca953x 0-0077: failed reading register [ 1.570541] pca953x: probe of 0-0077 failed with error -121 [ 1.587753] max77620 4-003c: PMIC Version OTP:0x4D and ES:0x1 [END] 20/4/21 11:46:26